3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
57bbb0e17d
Prusa-Firmware/Firmware/ultralcd_implementation_hitachi_HD44780.h

1424 lines
42 KiB
C
Raw Normal View History

Initial commit
2016-07-22 13:28:01 +00:00
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
int scrollstuff = 0;
char longFilenameOLD[LONG_FILENAME_LENGTH];
#include "Configuration_prusa.h"
#include "Marlin.h"
/**
* Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
* When selecting the Russian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/
#ifndef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#endif
////////////////////////////////////
// Setup button and encode mappings for each panel (into 'buttons' variable
//
// This is just to map common functions (across different panels) onto the same
// macro name. The mapping is independent of whether the button is directly connected or
// via a shift/i2c register.
#ifdef ULTIPANEL
// All UltiPanels might have an encoder - so this is always be mapped onto first two bits
#define BLEN_B 1
#define BLEN_A 0
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A (1<<BLEN_A)
#if defined(BTN_ENC) && BTN_ENC > -1
// encoder click is directly connected
#define BLEN_C 2
#define EN_C (1<<BLEN_C)
#endif
//
// Setup other button mappings of each panel
//
#if defined(LCD_I2C_VIKI)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#if defined(BTN_ENC) && BTN_ENC > -1
// the pause/stop/restart button is connected to BTN_ENC when used
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
#else
#define LCD_CLICKED (buttons&(B_MI|B_RI))
#endif
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#elif defined(LCD_I2C_PANELOLU2)
// encoder click can be read through I2C if not directly connected
#if BTN_ENC <= 0
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
#define LCD_CLICKED (buttons&B_MI)
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
#define LCD_HAS_SLOW_BUTTONS
#else
#define LCD_CLICKED (buttons&EN_C)
#endif
#elif defined(REPRAPWORLD_KEYPAD)
// define register bit values, don't change it
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
#elif defined(NEWPANEL)
#define LCD_CLICKED (buttons&EN_C)
#else // old style ULTIPANEL
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
//automatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif
////////////////////////
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
// These values are independent of which pins are used for EN_A and EN_B indications
// The rotary encoder part is also independent to the chipset used for the LCD
#if defined(EN_A) && defined(EN_B)
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
#endif //ULTIPANEL
////////////////////////////////////
// Create LCD class instance and chipset-specific information
#if defined(LCD_I2C_TYPE_PCF8575)
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
#define LCD_I2C_PIN_BL 3
#define LCD_I2C_PIN_EN 2
#define LCD_I2C_PIN_RW 1
#define LCD_I2C_PIN_RS 0
#define LCD_I2C_PIN_D4 4
#define LCD_I2C_PIN_D5 5
#define LCD_I2C_PIN_D6 6
#define LCD_I2C_PIN_D7 7
#include <Wire.h>
#include <LCD.h>
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#elif defined(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
#define LED_B 0x02 //010
#define LED_C 0x01 //001
#define LCD_HAS_STATUS_INDICATORS
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if defined(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif defined(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
#if defined(DETECT_DEVICE)
LCD_CLASS lcd(LCD_I2C_ADDRESS, 1);
#else
LCD_CLASS lcd(LCD_I2C_ADDRESS);
#endif
#elif defined(LCD_I2C_TYPE_PCA8574)
#include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
// 2 wire Non-latching LCD SR from:
// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
#elif defined(SR_LCD_2W_NL)
extern "C" void __cxa_pure_virtual() { while (1); }
#include <LCD.h>
#include <LiquidCrystal_SR.h>
#define LCD_CLASS LiquidCrystal_SR
LCD_CLASS lcd(SR_DATA_PIN, SR_CLK_PIN);
#else
// Standard directly connected LCD implementations
#ifdef LANGUAGE_RU
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else
#include "LiquidCrystal.h"
#define LCD_CLASS LiquidCrystal
#endif
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
static uint16_t progressBarTick = 0;
#if PROGRESS_MSG_EXPIRE > 0
static uint16_t messageTick = 0;
#endif
#define LCD_STR_PROGRESS "\x03\x04\x05"
#endif
/* Custom characters defined in the first 8 characters of the LCD */
#define LCD_STR_BEDTEMP "\x00"
#define LCD_STR_DEGREE "\x01"
#define LCD_STR_THERMOMETER "\x02"
#define LCD_STR_UPLEVEL "\x03"
#define LCD_STR_REFRESH "\x04"
#define LCD_STR_FOLDER "\x05"
#define LCD_STR_FEEDRATE "\x06"
#define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_UP "\x0B"
#define LCD_STR_ARROW_DOWN "\x01"
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
static void lcd_set_custom_characters(
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
bool progress_bar_set=true
#endif
) {
byte bedTemp[8] = {
B00000,
B11111,
B10101,
B10001,
B10101,
B11111,
B00000,
B00000
}; //thanks Sonny Mounicou
byte degree[8] = {
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
byte thermometer[8] = {
B00100,
B01010,
B01010,
B01010,
B01010,
B10001,
B10001,
B01110
};
byte uplevel[8] = {
B00100,
B01110,
B11111,
B00100,
B11100,
B00000,
B00000,
B00000
}; //thanks joris
byte refresh[8] = {
B00000,
B00110,
B11001,
B11000,
B00011,
B10011,
B01100,
B00000,
}; //thanks joris
byte folder[8] = {
B00000,
B11100,
B11111,
B10001,
B10001,
B11111,
B00000,
B00000
}; //thanks joris
#ifdef LANGUAGE_EN_H
byte feedrate[8] = {
B11100,
B10000,
B11000,
B10111,
B00101,
B00110,
B00101,
B00000
}; //thanks Sonny Mounicou
#else
/*
byte feedrate[8] = {
B11100,
B10100,
B11000,
B10100,
B00000,
B00111,
B00010,
B00010
};
*/
/*
byte feedrate[8] = {
B01100,
B10011,
B00000,
B01100,
B10011,
B00000,
B01100,
B10011
};
*/
byte feedrate[8] = {
B00000,
B00100,
B10010,
B01001,
B10010,
B00100,
B00000,
B00000
};
#endif
byte clock[8] = {
B00000,
B01110,
B10011,
B10101,
B10001,
B01110,
B00000,
B00000
}; //thanks Sonny Mounicou
byte arrup[8] = {
B00100,
B01110,
B11111,
B00000,
B00000,
B00000,
B00000,
B00000
};
byte arrdown[8] = {
B00000,
B00000,
B00000,
B00000,
B00000,
B10001,
B01010,
B00100
};
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
static bool char_mode = false;
byte progress[3][8] = { {
B00000,
B10000,
B10000,
B10000,
B10000,
B10000,
B10000,
B00000
}, {
B00000,
B10100,
B10100,
B10100,
B10100,
B10100,
B10100,
B00000
}, {
B00000,
B10101,
B10101,
B10101,
B10101,
B10101,
B10101,
B00000
} };
if (progress_bar_set != char_mode) {
char_mode = progress_bar_set;
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
lcd.createChar(LCD_STR_CLOCK[0], clock);
if (progress_bar_set) {
// Progress bar characters for info screen
for (int i=3; i--;) lcd.createChar(LCD_STR_PROGRESS[i], progress[i]);
}
else {
// Custom characters for submenus
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
lcd.createChar(LCD_STR_REFRESH[0], refresh);
lcd.createChar(LCD_STR_FOLDER[0], folder);
}
}
#else
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
lcd.createChar(LCD_STR_REFRESH[0], refresh);
lcd.createChar(LCD_STR_FOLDER[0], folder);
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
lcd.createChar(LCD_STR_CLOCK[0], clock);
//lcd.createChar(LCD_STR_ARROW_UP[0], arrup);
//lcd.createChar(LCD_STR_ARROW_DOWN[0], arrdown);
#endif
}
void lcd_set_custom_characters_arrows()
{
byte arrdown[8] = {
B00000,
B00000,
B00000,
B00000,
B00000,
B10001,
B01010,
B00100
};
lcd.createChar(1, arrdown);
}
Multi screen messages will display a "next page" indicator if a next page follows.
2016-09-01 13:14:55 +00:00
all sd sort files: initial version; sorting type switch not added to SD card menu itself
2017-12-10 10:08:50 +00:00
void lcd_set_custom_characters_progress()
{
byte progress[8] = {
B11111,
B11111,
B11111,
B11111,
B11111,
B11111,
B11111,
B11111,
};
lcd.createChar(1, progress);
}
Multi screen messages will display a "next page" indicator if a next page follows.
2016-09-01 13:14:55 +00:00
void lcd_set_custom_characters_nextpage()
{
byte arrdown[8] = {
B00000,
B00000,
B10001,
B01010,
B00100,
B10001,
B01010,
B00100
};
initial version - messages missing (will not compile)
2017-11-07 15:49:04 +00:00
byte confirm[8] = {
B00000,
B00001,
B00011,
B10110,
B11100,
B01000,
B00000
};
Multi screen messages will display a "next page" indicator if a next page follows.
2016-09-01 13:14:55 +00:00
lcd.createChar(1, arrdown);
initial version - messages missing (will not compile)
2017-11-07 15:49:04 +00:00
lcd.createChar(2, confirm);
Multi screen messages will display a "next page" indicator if a next page follows.
2016-09-01 13:14:55 +00:00
}
Initial commit
2016-07-22 13:28:01 +00:00
void lcd_set_custom_characters_degree()
{
byte degree[8] = {
B01100,
B10010,
B10010,
B01100,
B00000,
B00000,
B00000,
B00000
};
lcd.createChar(1, degree);
}
static void lcd_implementation_init(
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
bool progress_bar_set=true
#endif
) {
#if defined(LCD_I2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd_set_custom_characters(
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
progress_bar_set
#endif
);
lcd.clear();
}
static void lcd_implementation_init_noclear(
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
bool progress_bar_set=true
#endif
) {
#if defined(LCD_I2C_TYPE_PCF8575)
lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH);
#endif
#elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
#elif defined(LCD_I2C_TYPE_PCA8574)
lcd.init();
lcd.backlight();
#else
lcd.begin_noclear(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd_set_custom_characters(
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
progress_bar_set
#endif
);
}
static void lcd_implementation_nodisplay()
{
lcd.noDisplay();
}
static void lcd_implementation_display()
{
lcd.display();
}
void lcd_implementation_clear()
{
lcd.clear();
}
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
void lcd_printPGM(const char* str)
{
char c;
while((c = pgm_read_byte(str++)) != '\0')
{
lcd.write(c);
}
}
void lcd_print_at_PGM(uint8_t x, uint8_t y, const char* str)
{
lcd.setCursor(x, y);
char c;
while((c = pgm_read_byte(str++)) != '\0')
{
lcd.write(c);
}
}
void lcd_implementation_write(char c)
{
lcd.write(c);
}
void lcd_implementation_print(int8_t i)
{
lcd.print(i);
}
void lcd_implementation_print_at(uint8_t x, uint8_t y, int8_t i)
{
lcd.setCursor(x, y);
lcd.print(i);
}
void lcd_implementation_print(int i)
{
lcd.print(i);
}
void lcd_implementation_print_at(uint8_t x, uint8_t y, int i)
{
lcd.setCursor(x, y);
lcd.print(i);
}
void lcd_implementation_print(float f)
{
lcd.print(f);
}
void lcd_implementation_print(const char *str)
{
lcd.print(str);
}
void lcd_implementation_print_at(uint8_t x, uint8_t y, const char *str)
{
lcd.setCursor(x, y);
lcd.print(str);
}
/*
20x4 |01234567890123456789|
|T 000/000D Z000.0 |
|B 000/000D F100% |
|SD100% T--:-- |
|Status line.........|
*/
static void lcd_implementation_status_screen()
{
int tHotend=int(degHotend(0) + 0.5);
int tTarget=int(degTargetHotend(0) + 0.5);
//Print the hotend temperature
lcd.setCursor(0, 0);
lcd.print(LCD_STR_THERMOMETER[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
//Print the Z coordinates
lcd.setCursor(LCD_WIDTH - 8-2, 0);
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
#if 1
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" Z"));
if (custom_message_type == 1) {
// In a bed calibration mode.
lcd_printPGM(PSTR(" --- "));
} else {
lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
lcd.print(' ');
}
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
#else
lcd_printPGM(PSTR(" Queue:"));
lcd.print(int(moves_planned()));
lcd.print(' ');
#endif
Initial commit
2016-07-22 13:28:01 +00:00
//Print the Bedtemperature
lcd.setCursor(0, 1);
tHotend=int(degBed() + 0.5);
tTarget=int(degTargetBed() + 0.5);
lcd.print(LCD_STR_BEDTEMP[0]);
lcd.print(itostr3(tHotend));
lcd.print('/');
lcd.print(itostr3left(tTarget));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
#ifdef PLANNER_DIAGNOSTICS
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
//Print Feedrate
lcd.setCursor(LCD_WIDTH - 8-2, 1);
lcd.print(LCD_STR_FEEDRATE[0]);
lcd.print(itostr3(feedmultiply));
lcd_printPGM(PSTR("% Q"));
{
uint8_t queue = planner_queue_min();
if (queue < (BLOCK_BUFFER_SIZE >> 1)) {
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
lcd.write('!');
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
} else {
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
lcd.write((char)(queue / 10) + '0');
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
queue %= 10;
}
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
lcd.write((char)queue + '0');
Removed the non-working pressure advance feature. Improved accuracy of diagonal moves by oversampling the path discretization. Accelerated the planner by rewriting time critical routines from floating point to fixed point arithmetics.
2016-09-01 11:09:56 +00:00
planner_queue_min_reset();
}
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
#else /* PLANNER_DIAGNOSTICS */
//Print Feedrate
lcd.setCursor(LCD_WIDTH - 8-2, 1);
lcd_printPGM(PSTR(" "));
lcd.print(LCD_STR_FEEDRATE[0]);
lcd.print(itostr3(feedmultiply));
lcd_printPGM(PSTR("% "));
#endif /* PLANNER_DIAGNOSTICS */
PINDA thermistor + extruder current adjust.
2017-08-30 19:56:48 +00:00
bool print_sd_status = true;
Initial commit
2016-07-22 13:28:01 +00:00
PINDA thermistor + extruder current adjust.
2017-08-30 19:56:48 +00:00
#ifdef PINDA_THERMISTOR
// if (farm_mode && (custom_message_type == 4))
PINDA thermistor and ambient thermistor.
2017-09-05 12:02:35 +00:00
if (false)
PINDA thermistor + extruder current adjust.
2017-08-30 19:56:48 +00:00
{
lcd.setCursor(0, 2);
lcd_printPGM(PSTR("P"));
lcd.print(ftostr3(current_temperature_pinda));
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
print_sd_status = false;
}
#endif //PINDA_THERMISTOR
PINDA thermistor and ambient thermistor.
2017-09-05 12:02:35 +00:00
PINDA thermistor + extruder current adjust.
2017-08-30 19:56:48 +00:00
if (print_sd_status)
{
Initial commit
2016-07-22 13:28:01 +00:00
//Print SD status
lcd.setCursor(0, 2);
if (is_usb_printing)
{
lcd_printPGM(PSTR("--"));
}
else
{
lcd_printPGM(PSTR("SD"));
}
if (IS_SD_PRINTING)
{
lcd.print(itostr3(card.percentDone()));
lcd.print('%');
}
else
{
if (is_usb_printing)
{
lcd_printPGM(PSTR(">USB"));
}
else
{
lcd_printPGM(PSTR("---"));
lcd.print('%');
}
}
PINDA thermistor + extruder current adjust.
2017-08-30 19:56:48 +00:00
}
3.0.10 sync
2017-03-24 18:47:50 +00:00
// Farm number display
Initial commit
2016-07-22 13:28:01 +00:00
if (farm_mode)
{
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" F"));
Initial commit
2016-07-22 13:28:01 +00:00
lcd.print(farm_no);
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
3.0.10 sync
2017-03-24 18:47:50 +00:00
// Beat display
lcd.setCursor(LCD_WIDTH - 1, 0);
if ( (millis() - kicktime) < 60000 ) {
lcd_printPGM(PSTR("L"));
}else{
lcd_printPGM(PSTR(" "));
}
}
else {
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#ifdef SNMM
lcd_printPGM(PSTR(" E"));
lcd.print(get_ext_nr() + 1);
#else
3.0.10 sync
2017-03-24 18:47:50 +00:00
lcd.setCursor(LCD_WIDTH - 8 - 2, 2);
lcd_printPGM(PSTR(" "));
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#endif
Initial commit
2016-07-22 13:28:01 +00:00
}
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
3.0.10 sync
2017-03-24 18:47:50 +00:00
Initial commit
2016-07-22 13:28:01 +00:00
//Print time elapsed
3.0.10 sync
2017-03-24 18:47:50 +00:00
lcd.setCursor(LCD_WIDTH - 8 -1, 2);
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
lcd.print(LCD_STR_CLOCK[0]);
if(starttime != 0)
{
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
uint16_t time = millis() / 60000 - starttime / 60000;
Initial commit
2016-07-22 13:28:01 +00:00
lcd.print(itostr2(time/60));
lcd.print(':');
lcd.print(itostr2(time%60));
}else{
lcd_printPGM(PSTR("--:--"));
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
pat9125 filament sensor sg homing - bug fix + homing multiple axes simultanously (AXIS_MASK)
2017-07-07 02:45:09 +00:00
#ifdef DEBUG_DISABLE_LCD_STATUS_LINE
return;
#endif //DEBUG_DISABLE_LCD_STATUS_LINE
Initial commit
2016-07-22 13:28:01 +00:00
//Print status line
lcd.setCursor(0, 3);
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If heating in progress, set flag
Initial commit
2016-07-22 13:28:01 +00:00
if (heating_status != 0) { custom_message = true; }
First working version
2017-12-11 10:30:49 +00:00
if (IS_SD_PRINTING) {
if (strcmp(longFilenameOLD, card.longFilename) != 0)
{
memset(longFilenameOLD, '\0', strlen(longFilenameOLD));
sprintf_P(longFilenameOLD, PSTR("%s"), card.longFilename);
scrollstuff = 0;
}
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If printing from SD, show what we are printing
Support for debug builds: A build version and repository is displayed on the welcome screen, D-codes, stack overflow check and stepper timer overflow check are enabled in the debug mode.
2018-01-18 15:24:25 +00:00
if ((IS_SD_PRINTING) && !custom_message
#ifdef DEBUG_BUILD
&& lcd_status_message[0] == 0
#endif /* DEBUG_BUILD */
)
Initial commit
2016-07-22 13:28:01 +00:00
{
if(strlen(card.longFilename) > LCD_WIDTH)
status screen fix
2018-03-13 18:08:19 +00:00
{
Initial commit
2016-07-22 13:28:01 +00:00
statistics improved, initial version of function which forces user to connect printer to monitoring
2017-08-29 13:52:53 +00:00
int inters = 0;
int gh = scrollstuff;
while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0))
{
if (card.longFilename[gh] == '\0')
{
lcd.setCursor(gh - scrollstuff, 3);
lcd.print(card.longFilename[gh - 1]);
scrollstuff = 0;
gh = scrollstuff;
inters = 1;
}
else
{
lcd.setCursor(gh - scrollstuff, 3);
lcd.print(card.longFilename[gh - 1]);
gh++;
}
}
scrollstuff++;
status screen fix
2018-03-13 18:08:19 +00:00
}
else
{
statistics improved, initial version of function which forces user to connect printer to monitoring
2017-08-29 13:52:53 +00:00
lcd.print(longFilenameOLD);
status screen fix
2018-03-13 18:08:19 +00:00
}
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If not, check for other special events
Initial commit
2016-07-22 13:28:01 +00:00
else
{
3.0.6 sync
2016-08-11 08:42:53 +00:00
Initial commit
2016-07-22 13:28:01 +00:00
if (custom_message)
{
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If heating flag, show progress of heating.
Initial commit
2016-07-22 13:28:01 +00:00
if (heating_status != 0)
{
heating_status_counter++;
if (heating_status_counter > 13)
{
heating_status_counter = 0;
}
lcd.setCursor(7, 3);
lcd_printPGM(PSTR(" "));
for (int dots = 0; dots < heating_status_counter; dots++)
{
lcd.setCursor(7 + dots, 3);
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd.print('.');
Initial commit
2016-07-22 13:28:01 +00:00
}
switch (heating_status)
{
case 1:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING);
break;
case 2:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING_COMPLETE);
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
break;
case 3:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_HEATING);
break;
case 4:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_DONE);
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
break;
default:
break;
}
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If mesh bed leveling in progress, show the status
if (custom_message_type == 1)
Initial commit
2016-07-22 13:28:01 +00:00
{
if (custom_message_state > 10)
{
lcd.setCursor(0, 3);
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HOMEYZ_PROGRESS);
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" : "));
Initial commit
2016-07-22 13:28:01 +00:00
lcd.print(custom_message_state-10);
}
else
{
if (custom_message_state == 3)
{
lcd_printPGM(WELCOME_MSG);
lcd_setstatuspgm(WELCOME_MSG);
custom_message = false;
custom_message_type = 0;
}
improve mesh bed leveling messages
2017-11-24 19:18:11 +00:00
if (custom_message_state > 3 && custom_message_state <= 10 )
Initial commit
2016-07-22 13:28:01 +00:00
{
lcd.setCursor(0, 3);
3.0.6 sync
2016-08-11 08:42:53 +00:00
lcd_printPGM(PSTR(" "));
Initial commit
2016-07-22 13:28:01 +00:00
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HOMEYZ_DONE);
custom_message_state--;
}
}
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
// If loading filament, print status
if (custom_message_type == 2)
Initial commit
2016-07-22 13:28:01 +00:00
{
lcd.print(lcd_status_message);
}
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
// PID tuning in progress
if (custom_message_type == 3) {
lcd.print(lcd_status_message);
if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) {
lcd.setCursor(10, 3);
lcd.print(itostr3(pid_cycle));
lcd.print('/');
lcd.print(itostr3left(pid_number_of_cycles));
}
}
// PINDA temp calibration in progress
if (custom_message_type == 4) {
char progress[4];
lcd.setCursor(0, 3);
lcd_printPGM(MSG_TEMP_CALIBRATION);
lcd.setCursor(12, 3);
sprintf(progress, "%d/6", custom_message_state);
lcd.print(progress);
}
// temp compensation preheat
if (custom_message_type == 5) {
lcd.setCursor(0, 3);
lcd_printPGM(MSG_PINDA_PREHEAT);
if (custom_message_state <= PINDA_HEAT_T) {
lcd_printPGM(PSTR(": "));
lcd.print(custom_message_state); //seconds
lcd.print(' ');
}
}
Initial commit
2016-07-22 13:28:01 +00:00
}
else
{
3.0.6 sync
2016-08-11 08:42:53 +00:00
// Nothing special, print status message normally
Initial commit
2016-07-22 13:28:01 +00:00
lcd.print(lcd_status_message);
}
}
3.0.6 sync
2016-08-11 08:42:53 +00:00
// Fill the rest of line to have nice and clean output
Initial commit
2016-07-22 13:28:01 +00:00
for(int fillspace = 0; fillspace<20;fillspace++)
{
if((lcd_status_message[fillspace] > 31 ))
{
}
else
{
lcd.print(' ');
}
}
}
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1;
#else
uint8_t n = LCD_WIDTH - 1 - 2;
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
while(n--)
lcd.print(' ');
lcd.print(post_char);
lcd.print(' ');
}
static void lcd_implementation_drawmenu_generic_RAM(uint8_t row, const char* str, char pre_char, char post_char)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1;
#else
uint8_t n = LCD_WIDTH - 1 - 2;
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = *str) != '\0') && (n>0) )
{
lcd.print(c);
str++;
n--;
}
while(n--)
lcd.print(' ');
lcd.print(post_char);
lcd.print(' ');
}
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
#else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
lcd.print(':');
while(n--)
lcd.print(' ');
lcd.print(data);
}
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
{
char c;
//Use all characters in narrow LCDs
#if LCD_WIDTH < 20
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
#else
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
#endif
lcd.setCursor(0, row);
lcd.print(pre_char);
while( ((c = pgm_read_byte(pstr)) != '\0') && (n>0) )
{
lcd.print(c);
pstr++;
n--;
}
lcd.print(':');
while(n--)
lcd.print(' ');
lcd_printPGM(data);
}
tmc2130 optimalization, accurate homing and microstep linearity correction dcode D12 removed (no longer needed) homeaxis optimized + xy home calibration support new eeprom variables new lcd menu edit types (byte3, mres, wfac), new menu "Experimental" currents adjusted
2018-02-15 03:17:58 +00:00
extern char *wfac_to_str5(const uint8_t &x);
extern char *mres_to_str3(const uint8_t &x);
#define lcd_implementation_drawmenu_setting_edit_wfac_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', wfac_to_str5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_wfac(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', wfac_to_str5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_mres_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', mres_to_str3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_mres(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', mres_to_str3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_byte3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3((uint8_t)*(data)))
#define lcd_implementation_drawmenu_setting_edit_byte3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3((uint8_t)*(data)))
Initial commit
2016-07-22 13:28:01 +00:00
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
//Add version for callback functions
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
void lcd_implementation_drawedit(const char* pstr, char* value)
{
lcd.setCursor(1, 1);
lcd_printPGM(pstr);
lcd.print(':');
#if LCD_WIDTH < 20
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
#else
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
#endif
lcd.print(value);
}
void lcd_implementation_drawedit_2(const char* pstr, char* value)
{
lcd.setCursor(0, 1);
lcd_printPGM(pstr);
lcd.print(':');
lcd.setCursor((LCD_WIDTH - strlen(value))/2, 3);
lcd.print(value);
lcd.print(" mm");
}
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
int enc_dif = encoderDiff;
uint8_t n = LCD_WIDTH - 1;
for(int g = 0; g<4;g++){
lcd.setCursor(0, g);
lcd.print(' ');
}
lcd.setCursor(0, row);
lcd.print('>');
whitespace and minor corrections
2017-11-26 19:57:28 +00:00
int i = 1;
Initial commit
2016-07-22 13:28:01 +00:00
int j = 0;
char* longFilenameTMP = longFilename;
Improved SD card menu
2017-11-20 16:20:56 +00:00
while((c = *longFilenameTMP) != '\0')
Initial commit
2016-07-22 13:28:01 +00:00
{
lcd.setCursor(i, row);
lcd.print(c);
i++;
longFilenameTMP++;
if(i==LCD_WIDTH){
i=1;
j++;
Improved SD card menu
2017-11-20 16:20:56 +00:00
longFilenameTMP = longFilename + j;
Initial commit
2016-07-22 13:28:01 +00:00
n = LCD_WIDTH - 1;
Improved SD card menu
2017-11-20 16:20:56 +00:00
for(int g = 0; g<300 ;g++){
manage heater added
2017-11-26 19:51:56 +00:00
manage_heater();
Initial commit
2016-07-22 13:28:01 +00:00
if(LCD_CLICKED || ( enc_dif != encoderDiff )){
Improved SD card menu
2017-11-20 16:20:56 +00:00
longFilenameTMP = longFilename;
*(longFilenameTMP + LCD_WIDTH - 2) = '\0';
i = 1;
j = 0;
break;
Initial commit
2016-07-22 13:28:01 +00:00
}else{
Improved SD card menu
2017-11-20 16:20:56 +00:00
if (j == 1) delay(3); //wait around 1.2 s to start scrolling text
delay(1); //then scroll with redrawing every 300 ms
whitespace and minor corrections
2017-11-26 19:57:28 +00:00
}
Initial commit
2016-07-22 13:28:01 +00:00
}
}
}
if(c!='\0'){
lcd.setCursor(i, row);
lcd.print(c);
i++;
}
n=n-i+1;
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 1;
lcd.setCursor(0, row);
lcd.print(' ');
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-1] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 2;
lcd.setCursor(0, row);
lcd.print('>');
lcd.print(LCD_STR_FOLDER[0]);
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
{
char c;
uint8_t n = LCD_WIDTH - 2;
lcd.setCursor(0, row);
lcd.print(' ');
lcd.print(LCD_STR_FOLDER[0]);
if (longFilename[0] != '\0')
{
filename = longFilename;
longFilename[LCD_WIDTH-2] = '\0';
}
while( ((c = *filename) != '\0') && (n>0) )
{
lcd.print(c);
filename++;
n--;
}
while(n--)
lcd.print(' ');
}
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_back_RAM_selected(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_back_RAM(row, str, data) lcd_implementation_drawmenu_generic_RAM(row, str, ' ', LCD_STR_UPLEVEL[0])
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
#define lcd_implementation_drawmenu_setlang_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
#define lcd_implementation_drawmenu_setlang(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
static void lcd_implementation_quick_feedback()
{
#ifdef LCD_USE_I2C_BUZZER
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
lcd_buzz(1000/6,100);
#else
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS,LCD_FEEDBACK_FREQUENCY_HZ);
#endif
#elif defined(BEEPER) && BEEPER > -1
SET_OUTPUT(BEEPER);
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
for(int8_t i=0;i<10;i++)
{
WRITE(BEEPER,HIGH);
delayMicroseconds(100);
WRITE(BEEPER,LOW);
delayMicroseconds(100);
}
#else
for(int8_t i=0;i<(LCD_FEEDBACK_FREQUENCY_DURATION_MS / (1000 / LCD_FEEDBACK_FREQUENCY_HZ));i++)
{
WRITE(BEEPER,HIGH);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
WRITE(BEEPER,LOW);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2);
}
#endif
#endif
}
#ifdef LCD_HAS_STATUS_INDICATORS
static void lcd_implementation_update_indicators()
{
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
//set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (target_temperature_bed > 0) leds |= LED_A;
if (target_temperature[0] > 0) leds |= LED_B;
if (fanSpeed) leds |= LED_C;
#if EXTRUDERS > 1
if (target_temperature[1] > 0) leds |= LED_C;
#endif
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
#endif
}
#endif
#ifdef LCD_HAS_SLOW_BUTTONS
extern uint32_t blocking_enc;
static uint8_t lcd_implementation_read_slow_buttons()
{
#ifdef LCD_I2C_TYPE_MCP23017
uint8_t slow_buttons;
// Reading these buttons this is likely to be too slow to call inside interrupt context
// so they are called during normal lcd_update
slow_buttons = lcd.readButtons() << B_I2C_BTN_OFFSET;
status screen fix
2018-03-13 18:08:19 +00:00
Initial commit
2016-07-22 13:28:01 +00:00
#if defined(LCD_I2C_VIKI)
if(slow_buttons & (B_MI|B_RI)) { //LCD clicked
if(blocking_enc > millis()) {
slow_buttons &= ~(B_MI|B_RI); // Disable LCD clicked buttons if screen is updated
}
}
#endif
return slow_buttons;
#endif
}
#endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
Reference in New Issue Copy Permalink