3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
85f2c29dfe
Prusa-Firmware/Firmware/messages.h

184 lines
6.5 KiB
C
Raw Normal View History

New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
//messages.h
// Common serial messages
#define MSG_MARLIN "Marlin"
New lang, arduino 1.8.5 - language.h - section names, messages.h - extern "C" added
2018-10-18 12:41:32 +00:00
#if defined(__cplusplus)
extern "C" {
#endif //defined(__cplusplus)
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
// LCD Menu Messages
//internationalized messages
extern const char MSG_AUTO_HOME[];
extern const char MSG_BABYSTEP_Z[];
extern const char MSG_BABYSTEP_Z_NOT_SET[];
extern const char MSG_BED[];
extern const char MSG_BED_DONE[];
extern const char MSG_BED_HEATING[];
extern const char MSG_BED_LEVELING_FAILED_POINT_LOW[];
extern const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[];
extern const char MSG_CALIBRATE_Z_AUTO[];
extern const char MSG_CARD_MENU[];
extern const char MSG_CONFIRM_NOZZLE_CLEAN[];
extern const char MSG_COOLDOWN[];
extern const char MSG_CRASH_DETECTED[];
Toggle Crash det.
2019-08-29 19:31:30 +00:00
extern const char MSG_CRASHDETECT[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_ERROR[];
extern const char MSG_EXTRUDER[];
missing declaration fix
2018-09-11 09:06:37 +00:00
extern const char MSG_FILAMENT[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_FAN_SPEED[];
extern const char MSG_FILAMENT_CLEAN[];
extern const char MSG_FILAMENT_LOADING_T0[];
extern const char MSG_FILAMENT_LOADING_T1[];
extern const char MSG_FILAMENT_LOADING_T2[];
extern const char MSG_FILAMENT_LOADING_T3[];
extern const char MSG_FILAMENTCHANGE[];
extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[];
extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[];
extern const char MSG_FINISHING_MOVEMENTS[];
extern const char MSG_FOLLOW_CALIBRATION_FLOW[];
ShippingPrepare & M600 message after ShippingPrepare M600 :: better filament (un)retraction
2018-08-22 22:08:14 +00:00
extern const char MSG_FOLLOW_Z_CALIBRATION_FLOW[];
Toggle FSENSOR and FSENSOR_AUTOLOAD
2019-08-19 08:58:16 +00:00
extern const char MSG_FSENSOR_AUTOLOAD[];
extern const char MSG_FSENSOR[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_HEATING[];
extern const char MSG_HEATING_COMPLETE[];
extern const char MSG_HOMEYZ[];
extern const char MSG_CHOOSE_EXTRUDER[];
missing declaration fix
2018-09-11 09:06:37 +00:00
extern const char MSG_CHOOSE_FILAMENT[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_LOAD_FILAMENT[];
extern const char MSG_LOADING_FILAMENT[];
extern const char MSG_M117_V2_CALIBRATION[];
extern const char MSG_MAIN[];
SD card menu enhancement
2019-03-06 18:51:26 +00:00
extern const char MSG_BACK[];
Move sheet selector to submenu.
2019-06-21 13:44:56 +00:00
extern const char MSG_SHEET[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[];
extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[];
extern const char MSG_MENU_CALIBRATION[];
extern const char MSG_NO[];
extern const char MSG_NOZZLE[];
extern const char MSG_PAPER[];
extern const char MSG_PLACE_STEEL_SHEET[];
extern const char MSG_PLEASE_WAIT[];
extern const char MSG_PREHEAT_NOZZLE[];
extern const char MSG_PRESS_TO_UNLOAD[];
extern const char MSG_PRINT_ABORTED[];
extern const char MSG_PULL_OUT_FILAMENT[];
extern const char MSG_RECOVER_PRINT[];
extern const char MSG_REFRESH[];
extern const char MSG_REMOVE_STEEL_SHEET[];
New ML support - fixed duplicate strings
2018-06-01 12:35:03 +00:00
extern const char MSG_RESUMING_PRINT[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_SD_WORKDIR_FAIL[];
extern const char MSG_SELFTEST_COOLING_FAN[];
extern const char MSG_SELFTEST_EXTRUDER_FAN[];
extern const char MSG_SELFTEST_FAILED[];
extern const char MSG_SELFTEST_FAN[];
extern const char MSG_SELFTEST_FAN_NO[];
extern const char MSG_SELFTEST_FAN_YES[];
extern const char MSG_SELFTEST_CHECK_BED[];
extern const char MSG_SELFTEST_CHECK_FSENSOR[];
extern const char MSG_SELFTEST_MOTOR[];
Add filament sensor false triggering message.
2019-03-21 22:36:59 +00:00
extern const char MSG_SELFTEST_FILAMENT_SENSOR[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_SELFTEST_WIRINGERROR[];
extern const char MSG_SETTINGS[];
GUI updates
2019-07-16 18:10:49 +00:00
extern const char MSG_HW_SETUP[];
Toggle Mode (stepper power)
2019-08-30 04:59:58 +00:00
extern const char MSG_MODE[];
extern const char MSG_HIGH_POWER[];
extern const char MSG_AUTO_POWER[];
extern const char MSG_SILENT[];
extern const char MSG_NORMAL[];
extern const char MSG_STEALTH[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char MSG_STEEL_SHEET_CHECK[];
extern const char MSG_STOP_PRINT[];
extern const char MSG_STOPPED[];
extern const char MSG_TEMP_CALIBRATION[];
extern const char MSG_TEMP_CALIBRATION_DONE[];
extern const char MSG_UNLOAD_FILAMENT[];
extern const char MSG_UNLOADING_FILAMENT[];
extern const char MSG_WATCH[];
extern const char MSG_WIZARD_CALIBRATION_FAILED[];
extern const char MSG_WIZARD_DONE[];
extern const char MSG_WIZARD_HEATING[];
extern const char MSG_WIZARD_QUIT[];
extern const char MSG_YES[];
Move translated string MSG_V2_CALIBRATION from untranslated section to PROGMEM_I1, add missing ISTR macro. Revert _T(MSG_SELECT) and _T(MSG_RENAME) to _i("Select") and _i("Rename") as it is preferred macro for internationalized strings. Use MSG_V2_CALIBRATION in both occurrences.
2019-07-08 19:18:41 +00:00
extern const char MSG_V2_CALIBRATION[];
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
extern const char WELCOME_MSG[];
Actual fix to the missing first two characters
2019-08-10 18:03:45 +00:00
extern const char MSG_OFF[];
extern const char MSG_ON[];
"N/A" toggle support and format update
2019-08-19 07:20:17 +00:00
extern const char MSG_NA[];
Move SpoolJoin and Cutter to MSGs
2019-08-29 14:35:26 +00:00
extern const char MSG_AUTO_DEPLETE[];
extern const char MSG_CUTTER[];
Toggle "HW Setup"* All toggles from "HW Setup" were changed. This includes: -"Nozzle d." -all "Checks" Also added an option to provide a string from sram (not from progmem) as the toggle argument. This can be useful when toggling numbers or even when toggling sheets in the future.
2019-08-30 14:36:21 +00:00
extern const char MSG_NONE[];
extern const char MSG_WARN[];
extern const char MSG_STRICT[];
extern const char MSG_MODEL[];
extern const char MSG_FIRMWARE[];
extern const char MSG_GCODE[];
extern const char MSG_NOZZLE_DIAMETER[];
Toggle MMU Mode
2019-08-31 04:38:40 +00:00
extern const char MSG_MMU_MODE[];
Toggle SD Settings This includes FlashAir support and SD Sorting type
2019-08-31 11:55:51 +00:00
extern const char MSG_SD_CARD[];
extern const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY[];
extern const char MSG_SORT[];
extern const char MSG_SORT_TIME[];
extern const char MSG_SORT_ALPHA[];
Toggle RPi port Probably works, needs to be tested.
2019-08-31 12:25:00 +00:00
extern const char MSG_RPI_PORT[];
Toggle Sound
2019-08-31 13:56:14 +00:00
extern const char MSG_SOUND[];
extern const char MSG_SOUND_LOUD[];
extern const char MSG_SOUND_ONCE[];
extern const char MSG_SOUND_BLIND[];
MBL toggle and cleanup
2019-11-09 18:58:56 +00:00
extern const char MSG_MESH[];
extern const char MSG_Z_PROBE_NR[];
extern const char MSG_MAGNETS_COMP[];
Updated branch to use TOGGLE
2019-11-19 11:51:10 +00:00
extern const char MSG_FS_ACTION[];
extern const char MSG_FS_CONTINUE[];
extern const char MSG_FS_PAUSE[];
Update Toggles and Translations
2019-11-17 07:53:14 +00:00
extern const char MSG_BRIGHTNESS[];
extern const char MSG_BL_HIGH[];
extern const char MSG_BL_LOW[];
extern const char MSG_TIMEOUT[];
extern const char MSG_BRIGHT[];
extern const char MSG_DIM[];
extern const char MSG_AUTO[];
Rephrase texts for fsensor detection and cleanup (#2630) * Rephrase texts for fsensor detection and cleanup * fsensor msgs only for MK3S
2020-04-24 17:46:54 +00:00
#ifdef IR_SENSOR_ANALOG
MK3s IR sensor improvement (#2698) * Update EEPROM_FSENSOR_PCB documentation * Update IR sensor check * Rename IR messags and add UNKNOWN state * Update code to use new messages * To be continued * Move fsensor related things from ultralcd.h to fsensor.h * Use defined Thresholds * IR sensor auto detection "0.3 or older" and "0.4 or newer" when trigger status changes. Typo fixes Doxygen documentation * Cleanup spaces * Revert PF-build.sh changes * re-add space in messages * revert doxygen snytax * Remove double _Undef * Fix indentation and doxygen syntax * Fix indentation * Better message handling * Fix indentation * Fix indentation * More indentation fixwa * Extract common code into manage_inactivity_IR_ANALOG_Check Saves ~60B of code * Revert indentation changes on fsensor.cpp * Keep the selftest IR sensor part disabled Everything shall happen at runtime * Fix indentation fsensor_update * Fix another misleading indentation in fsensor_update Co-authored-by: Alex Voinea <voinea.dragos.alexandru@gmail.com> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-06-03 14:14:56 +00:00
extern const char MSG_IR_04_OR_NEWER[];
extern const char MSG_IR_03_OR_OLDER[];
extern const char MSG_IR_UNKNOWN[];
Rephrase texts for fsensor detection and cleanup (#2630) * Rephrase texts for fsensor detection and cleanup * fsensor msgs only for MK3S
2020-04-24 17:46:54 +00:00
#endif
"N/A" toggle support and format update
2019-08-19 07:20:17 +00:00
New ML support - migration - replaced source, removed original ML support files (backup)
2018-05-22 01:20:03 +00:00
//not internationalized messages
extern const char MSG_BROWNOUT_RESET[];
extern const char MSG_EXTERNAL_RESET[];
extern const char MSG_FILE_SAVED[];
extern const char MSG_POSITION_UNKNOWN[];
extern const char MSG_SOFTWARE_RESET[];
extern const char MSG_UNKNOWN_COMMAND[];
extern const char MSG_WATCHDOG_RESET[];
extern const char MSG_Z_MAX[];
extern const char MSG_Z_MIN[];
extern const char MSG_ZPROBE_OUT[];
extern const char MSG_ZPROBE_ZOFFSET[];
New ML support - w25x20cl spi external flash support +fixed some messages +sec lang update test
2018-06-08 23:23:04 +00:00
extern const char MSG_TMC_OVERTEMP[];
Lang - text "endstops hit: " removed from dictionary
2018-11-22 16:53:51 +00:00
extern const char MSG_Enqueing[];
extern const char MSG_ENDSTOPS_HIT[];
Lang - text "error writing to file" removed from dictionary
2018-11-22 16:57:52 +00:00
extern const char MSG_SD_ERR_WRITE_TO_FILE[];
Lang - text "ok" removed from dictionary
2018-11-22 17:12:19 +00:00
extern const char MSG_OK[];
Lang - text "open failed, File: " removed from dictionary
2018-11-22 17:15:22 +00:00
extern const char MSG_SD_OPEN_FILE_FAIL[];
Lang - text "open" removed from dictionary
2018-11-22 17:18:25 +00:00
extern const char MSG_ENDSTOP_OPEN[];
Lang - text "PowerUp" removed from dictionary
2018-11-22 17:24:21 +00:00
extern const char MSG_POWERUP[];
Lang - text "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" removed from dictionary
2018-11-22 17:36:38 +00:00
extern const char MSG_ERR_STOPPED[];
Lang - text "TRIGGERED" removed from dictionary
2018-11-22 17:46:02 +00:00
extern const char MSG_ENDSTOP_HIT[];
Generate menu item texts Load filament <nr.> and Eject filament <nr.> during runtime to conserve flash.
2019-05-14 13:47:25 +00:00
extern const char MSG_EJECT_FILAMENT[];
Generate menu item texts Cut filament <nr.> during runtime to conserve flash.
2019-05-14 14:25:29 +00:00
extern const char MSG_CUT_FILAMENT[];
FAN Error fix - Initial
2019-09-19 17:48:59 +00:00
extern const char MSG_OCTOPRINT_PAUSED[];
extern const char MSG_OCTOPRINT_RESUMED[];
Code cleanup: Move texts to messages.c/h
2019-09-30 17:16:01 +00:00
extern const char MSG_OCTOPRINT_CANCEL[];
extern const char MSG_FANCHECK_EXTRUDER[];
extern const char MSG_FANCHECK_PRINT[];
Fix kill messages
2019-11-29 20:49:22 +00:00
extern const char MSG_M112_KILL[];
Merge remote-tracking branch 'upstream/MK3' into MK3_LA15
2019-12-18 16:03:54 +00:00
extern const char MSG_ADVANCE_K[];
Display "POWER PANIC DETECTED" when possible Both during early init and in uvlo_tiny, display "POWER PANIC DETECTED" if enough charge is left. This is not worth doing in regular uvlo_, as we want to give full priority to the X motor
2020-01-29 20:08:56 +00:00
extern const char MSG_POWERPANIC_DETECTED[];
Update messages.h cleanup space
2020-10-21 15:04:20 +00:00
extern const char MSG_LCD_STATUS_CHANGED[];
New lang, arduino 1.8.5 - language.h - section names, messages.h - extern "C" added
2018-10-18 12:41:32 +00:00
#if defined(__cplusplus)
}
#endif //defined(__cplusplus)
Reference in New Issue Copy Permalink