3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a53428835a
Prusa-Firmware/Firmware/language_en.h

320 lines
20 KiB
C
Raw Normal View History

Initial commit
2016-07-22 13:28:01 +00:00
/**
* English
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) WELCOME_MSG CUSTOM_MENDEL_NAME " ready."
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main"
#define MSG_DISABLE_STEPPERS "Disable steppers"
#define MSG_AUTO_HOME "Auto home"
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#define MSG_SET_ORIGIN "Set origin"
#define MSG_COOLDOWN "Cooldown"
#define MSG_SWITCH_PS_ON "Switch power on"
#define MSG_SWITCH_PS_OFF "Switch power off"
#define MSG_MOVE_AXIS "Move axis"
#define MSG_MOVE_X "Move X"
#define MSG_MOVE_Y "Move Y"
#define MSG_MOVE_Z "Move Z"
#define MSG_MOVE_E "Extruder"
#define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=14) MSG_FAN_SPEED "Fan speed"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1"
#define MSG_FLOW2 "Flow 2"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
#define MSG_REFRESH "\xF8" "Refresh"
#define MSG_WATCH "Info screen"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause print"
#define MSG_RESUME_PRINT "Resume print"
#define MSG_STOP_PRINT "Stop print"
#define MSG_CARD_MENU "Print from SD"
#define MSG_NO_CARD "No SD card"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_RESUMING "Resuming print"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_PRINT_ABORTED "Print aborted"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_FILAMENTCHANGE "Change filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Change SD card"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Live adjust Z"
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define MSG_ADJUSTZ "Auto adjust Z?"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_PICK_Z "Pick print"
#define MSG_SETTINGS "Settings"
#define MSG_PREHEAT "Preheat"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=17) MSG_UNLOAD_FILAMENT "Unload filament"
#define(length=17) MSG_LOAD_FILAMENT "Load filament"
#define(length=17) MSG_LOAD_FILAMENT_1 "Load filament 1"
#define(length=17) MSG_LOAD_FILAMENT_2 "Load filament 2"
#define(length=17) MSG_LOAD_FILAMENT_3 "Load filament 3"
#define(length=17) MSG_LOAD_FILAMENT_4 "Load filament 4"
#define(length=17) MSG_UNLOAD_FILAMENT_1 "Unload filament 1"
#define(length=17) MSG_UNLOAD_FILAMENT_2 "Unload filament 2"
#define(length=17) MSG_UNLOAD_FILAMENT_3 "Unload filament 3"
#define(length=17) MSG_UNLOAD_FILAMENT_4 "Unload filament 4"
#define MSG_UNLOAD_ALL "Unload all"
#define MSG_LOAD_ALL "Load all"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_RECTRACT "Rectract"
#define MSG_ERROR "ERROR:"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_PREHEAT_NOZZLE "Preheat the nozzle!"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_SUPPORT "Support"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_CORRECTLY "Changed correctly?"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_YES "Yes"
#define MSG_NO "No"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=19) MSG_NOT_LOADED "Filament not loaded"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_NOT_COLOR "Color not clear"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_LOADING_FILAMENT "Loading filament"
#define(length=20) MSG_PLEASE_WAIT "Please wait"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_LOADING_COLOR "Loading color"
#define MSG_CHANGE_SUCCESS "Change success!"
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=20) MSG_PRESS "and press the knob"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_INSERT_FILAMENT "Insert filament"
#define(length=20) MSG_CHANGING_FILAMENT "Changing filament!"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_SILENT_MODE_ON "Mode [silent]"
#define MSG_SILENT_MODE_OFF "Mode [high power]"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_REBOOT "Reboot the printer"
#define(length=20) MSG_TAKE_EFFECT " for take effect"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
#define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_HEATING "Heating"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_HEATING_COMPLETE "Heating done."
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_BED_HEATING "Bed Heating"
#define MSG_BED_DONE "Bed done"
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
#define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_RESEND "Resend: "
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_BABYSTEPPING_X "Babystepping X"
#define MSG_BABYSTEPPING_Y "Babystepping Y"
#define MSG_BABYSTEPPING_Z "Adjusting Z"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
#define MSG_LANGUAGE_NAME "English"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define MSG_LANGUAGE_SELECT "Select language"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_PRUSA3D "prusa3d.com"
#define MSG_PRUSA3D_FORUM "forum.prusa3d.com"
#define MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
#define MSG_SELFTEST_ERROR "Selftest error !"
#define MSG_SELFTEST_PLEASECHECK "Please check :"
#define MSG_SELFTEST_NOTCONNECTED "Not connected"
#define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
#define MSG_SELFTEST_BEDHEATER "Bed / Heater"
#define MSG_SELFTEST_WIRINGERROR "Wiring error"
#define MSG_SELFTEST_ENDSTOPS "Endstops"
#define MSG_SELFTEST_MOTOR "Motor"
#define MSG_SELFTEST_ENDSTOP "Endstop"
selftest
2017-07-06 11:19:11 +00:00
#define MSG_SELFTEST_AXIS "Axis"
#define MSG_SELFTEST_AXIS_LENGTH "Axis length"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=20,lines=1) MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_SELFTEST_OK "Self test OK"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=20,lines=1) MSG_LOOSE_PULLEY "Loose pulley"
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=20) MSG_SELFTEST_FAN "Fan test";
#define(length=20) MSG_SELFTEST_COOLING_FAN "Front print fan?";
#define(length=20) MSG_SELFTEST_EXTRUDER_FAN "Left hotend fan?";
#define MSG_SELFTEST_FAN_YES "Spinning";
#define MSG_SELFTEST_FAN_NO "Not spinning";
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_STATS_TOTALFILAMENT "Total filament :"
#define(length=20) MSG_STATS_TOTALPRINTTIME "Total print time :"
#define(length=20) MSG_STATS_FILAMENTUSED "Filament used: "
#define(length=20) MSG_STATS_PRINTTIME "Print time: "
#define(length=20) MSG_SELFTEST_START "Self test start "
#define(length=20) MSG_SELFTEST_CHECK_ENDSTOPS "Checking endstops"
#define(length=20) MSG_SELFTEST_CHECK_HOTEND "Checking hotend "
#define(length=20) MSG_SELFTEST_CHECK_X "Checking X axis "
#define(length=20) MSG_SELFTEST_CHECK_Y "Checking Y axis "
#define(length=20) MSG_SELFTEST_CHECK_Z "Checking Z axis "
#define(length=20) MSG_SELFTEST_CHECK_BED "Checking bed "
#define(length=20) MSG_SELFTEST_CHECK_ALLCORRECT "All correct "
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_SELFTEST "Selftest "
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20) MSG_SELFTEST_FAILED "Selftest failed "
Initial commit
2016-07-22 13:28:01 +00:00
#define MSG_STATISTICS "Statistics "
#define MSG_USB_PRINTING "USB printing "
#define MSG_HOMEYZ "Calibrate Z"
#define MSG_HOMEYZ_PROGRESS "Calibrating Z"
#define MSG_HOMEYZ_DONE "Calibration done"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=17,lines=1) MSG_SHOW_END_STOPS "Show end stops"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define MSG_CALIBRATE_BED "Calibrate XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
Updated texts.
2016-09-01 09:19:32 +00:00
#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN "Please clean the nozzle for calibration. Click when done."
#define(length=20,lines=2) MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Are left and right Z~carriages all up?"
Updated texts.
2016-09-01 09:19:32 +00:00
#define(length=60) MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Searching bed calibration point"
#define(length=14) MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " of 4"
#define(length=60) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Improving bed calibration point"
#define(length=14) MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " of 9"
#define(length=60) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Measuring reference height of calibration point"
#define(length=14) MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " of 9"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=20) MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ calibration failed. Bed calibration point was not found."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ calibration failed. Please consult the manual."
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ calibration all right. Skew will be corrected automatically."
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ calibration failed. Left front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ calibration failed. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ calibration failed. Front calibration points not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ calibration compromised. Left front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ calibration compromised. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ calibration compromised. Front calibration points not reachable."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset."
#define(length=20,lines=4) MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
#define(length=20,lines=2) MSG_NEW_FIRMWARE_AVAILABLE "New firmware version available:"
Updated texts.
2016-09-01 09:19:32 +00:00
#define(length=20) MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Please upgrade."
3.0.6 sync
2016-08-11 08:42:53 +00:00
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=20,lines=8) MSG_FOLLOW_CALIBRATION_FLOW "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
#define(length=20,lines=12) MSG_BABYSTEP_Z_NOT_SET "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
#define(length=20, lines=4) MSG_FILAMENT_LOADING_T0 "Insert filament into extruder 1. Click when done."
#define(length=20, lines=4) MSG_FILAMENT_LOADING_T1 "Insert filament into extruder 2. Click when done."
#define(length=20, lines=4) MSG_FILAMENT_LOADING_T2 "Insert filament into extruder 3. Click when done."
#define(length=20, lines=4) MSG_FILAMENT_LOADING_T3 "Insert filament into extruder 4. Click when done."
#define(length=20, lines=1) MSG_CHANGE_EXTR "Change extruder"
#define(length=20, lines=4) MSG_FIL_ADJUSTING "Adjusting filaments. Please wait."
#define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
#define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten"
#define(length=20, lines=1) MSG_CALIBRATE_E "Calibrate E"
//#define(length=20, lines=1) MSG_RESET_CALIBRATE_E "Reset E Cal."
#define(length=20, lines=8) MSG_E_CAL_KNOB "Rotate knob until mark reaches extruder body. Click when done."
//#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
#define(length=20, lines=8) MSG_MARK_FIL "Mark filament 100mm from extruder body. Click when done."
#define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
#define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling"
#define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(lenght=18, lines=1) MSG_UNLOADING_FILAMENT "Unloading filament"
3.0.10 sync
2017-03-24 18:47:50 +00:00
#define(length=20, lines=8) MSG_PAPER "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define MSG_BED_CORRECTION_MENU "Bed level correct"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=14,lines=1) MSG_BED_CORRECTION_LEFT "Left side [um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_RIGHT "Right side[um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_FRONT "Front side[um]"
#define(length=14,lines=1) MSG_BED_CORRECTION_REAR "Rear side [um]"
3.0.6 sync
2016-08-11 08:42:53 +00:00
#define MSG_BED_CORRECTION_RESET "Reset"
#define MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
#define MSG_MENU_CALIBRATION "Calibration"
3.0.12-RC2 sync
2017-06-29 16:35:43 +00:00
#define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
#define(length=19, lines=1) MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
#define(length=20, lines=1) MSG_PRINTER_DISCONNECTED "Printer disconnected"
#define(length=20, lines=1) MSG_FINISHING_MOVEMENTS "Finishing movements"
#define(length=20, lines=1) MSG_PRINT_PAUSED "Print paused"
#define(length=20, lines=1) MSG_RESUMING_PRINT "Resuming print"
#define(length=17, lines=1) MSG_PID_EXTRUDER "PID calibration"
#define(length=19, lines=1) MSG_SET_TEMPERATURE "Set temperature:"
#define(length=20, lines=1) MSG_PID_FINISHED "PID cal. finished"
#define(length=20, lines=1) MSG_PID_RUNNING "PID cal. "
#define(length=17, lines=1) MSG_CALIBRATE_PINDA "Calibrate"
#define(length=17, lines=1) MSG_CALIBRATION_PINDA_MENU "Temp. calibration"
#define(length=20, lines=4) MSG_PINDA_NOT_CALIBRATED "Temperature calibration has not been run yet"
#define(length=20, lines=1) MSG_PINDA_PREHEAT "PINDA Heating"
#define(length=20, lines=1) MSG_TEMP_CALIBRATION "Temp. cal. "
#define(length=20, lines=4) MSG_TEMP_CALIBRATION_DONE "Temperature calibration is finished. Click to continue."
#define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON "Temp. cal. [ON]"
#define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF "Temp. cal. [OFF]"
#define(length=20, lines=1) MSG_PREPARE_FILAMENT "Prepare new filament"
#define(length=19, lines=1) MSG_ALL "All"
#define(length=19, lines=1) MSG_USED "Used during print"
#define(length=19, lines=1) MSG_CURRENT "Current"
#define(length=20, lines=1) MSG_CHOOSE_EXTRUDER "Choose extruder:"
#define(length=17, lines=1) MSG_EXTRUDER "Extruder"
#define(length=17, lines=1) MSG_EXTRUDER_1 "Extruder 1"
#define(length=17, lines=1) MSG_EXTRUDER_2 "Extruder 2"
#define(length=17, lines=1) MSG_EXTRUDER_3 "Extruder 3"
#define(length=17, lines=1) MSG_EXTRUDER_4 "Extruder 4"
status message during print recovery
2017-07-06 17:31:18 +00:00
#define(length=20, lines=2) MSG_RECOVER_PRINT "Blackout occurred. Recover print?"
#define(length=20, lines=1) MSG_RECOVERING_PRINT "Recovering print "
Power panic improved by turning off Z steppers Dubug outputs for filament and fan rotation sensors moved to special menu Support->Extruder info XYZ calibration debug now available only while not printing
2017-07-07 02:50:00 +00:00
#define(length=15, lines=1) MSG_INFO_EXTRUDER "Extruder info"
#define(length=11, lines=1) MSG_INFO_NOZZLE_FAN "Nozzle FAN:"
#define(length=11, lines=1) MSG_INFO_PRINT_FAN "Print FAN: "
#define(length=11, lines=1) MSG_INFO_FILAMENT_XDIFF "Fil. Xd:"
#define(length=11, lines=1) MSG_INFO_FILAMENT_YDIFF "Fil. Ydiff:"
fan error improvements
2017-09-22 16:22:21 +00:00
#define MSG_CALIBRATE_Z_AUTO "msg calibrate z auto"
#define MSG_FSENSOR_OFF "msg sensor off"
#define MSG_FSENSOR_ON "msg sensor on"
Reference in New Issue Copy Permalink