3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
Prusa-Firmware/lang/po/Firmware_pl.po

2119 lines
62 KiB
Text
Raw Normal View History

MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
# Translation of Prusa-Firmware into Polish.
#
msgid ""
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Wed 16 Mar 2022 09:24:56 AM CET\n"
"PO-Revision-Date: Wed 16 Mar 2022 09:24:56 AM CET\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: pl\n"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_03_OR_OLDER c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid " 0.3 or older"
msgstr " 0.3 lub starszy"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_04_OR_NEWER c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid " 0.4 or newer"
msgstr " 0.4 lub nowszy"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FS_LEVEL c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7044
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "%s level expected"
msgstr "Oczekiwano wersji %s"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_CANCEL c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3843
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ">Cancel"
msgstr ">Anuluj"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2678
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Adjusting Z:"
msgstr "Ustawianie Z:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7321
Update all po files
2021-04-29 13:41:47 +00:00
msgid "All correct"
msgstr "Wszystko OK"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_DONE c=20 r=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4188
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "All is done. Happy printing!"
msgstr "Gotowe. Udanego drukowania!"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT_ALPHA c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Alphabet"
msgstr "Alfab"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#. MSG_ALWAYS c=6
#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Always"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AMBIENT c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1413
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Ambient"
msgstr "Otoczenie"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2991
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Are left and right Z~carriages all up?"
msgstr "Obydwa konce osi sa na szczycie?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND_BLIND c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Assist"
msgstr "Asyst."
#. MSG_AUTO c=6
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Auto"
msgstr ""
#. MSG_AUTO_HOME c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4908
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Auto home"
msgstr "Auto zerowanie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTO_POWER c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5787
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Auto power"
msgstr "Automatycz"
#. MSG_AUTOLOAD_FILAMENT c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5580
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "AutoLoad filament"
msgstr "Autoladowanie fil."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3557
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Autoloading filament available only when filament sensor is turned on..."
msgstr ""
"Autoladowanie fil. dostepne tylko gdy czujnik filamentu jest wlaczony..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_AUTOLOADING_ENABLED c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2309
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Autoladowanie filamentu wlaczone, nacisnij pokretlo i wsun filament..."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_AXIS c=16
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7023
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Axis"
msgstr "Os"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_AXIS_LENGTH c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7022
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Axis length"
msgstr "Dlugosc osi"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BACK c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Back"
msgstr "Wstecz"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
#: ../../Firmware/ultralcd.cpp:5899
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed"
msgstr "Stol"
#. MSG_BED_HEATING c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:578
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bed Heating"
msgstr "Grzanie stolu.."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_DONE c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:581
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed done"
msgstr "Stol OK"
#. MSG_BED_CORRECTION_MENU c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4920
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bed level correct"
msgstr "Korekta stolu"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:2211 ../../Firmware/Marlin_main.cpp:2990
#: ../../Firmware/Marlin_main.cpp:3000
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2862
#: ../../Firmware/mesh_bed_calibration.cpp:2870
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""
"Kalibracja nieudana. Sensor nie aktywowal sie. Zanieczysz. dysza? Czekam na "
"reset."
#. MSG_SELFTEST_BEDHEATER c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6980
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Bed/Heater"
msgstr "Stol/Grzanie"
#. MSG_BELT_STATUS c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1734
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Belt status"
msgstr "Stan paskow"
#. MSG_BELTTEST c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4910
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Belt test"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Test paskow"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RECOVER_PRINT c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:77
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Blackout occurred. Recover print?"
msgstr "Wykryto zanik napiecia.Kontynowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BRIGHT c=6
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Bright"
msgstr "Jasny"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BRIGHTNESS c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5797
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Brightness"
msgstr "Jasnosc"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATE_BED c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4914
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrate XYZ"
msgstr "Kalibracja XYZ"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HOMEYZ c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrate Z"
msgstr "Kalibruj Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2954
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Kalibracja XYZ. Przekrec pokretlo, aby przesunac os Z do gornych "
"ogranicznikow. Nacisnij, by potwierdzic."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATE_Z_AUTO c=20 r=2
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:626
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibrating Z"
msgstr "Kalibruje Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2953
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Kalibracja XYZ. Przekrec pokretlo, aby przesunac os Z do gornych "
"ogranicznikow. Nacisnij, by potwierdzic."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATING_HOME c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7323
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Calibrating home"
msgstr "Zerowanie osi"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATION c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Calibration"
msgstr "Kalibracja"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HOMEYZ_DONE c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:638
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Calibration done"
msgstr "Kalibracja OK"
#. MSG_SD_REMOVED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7723
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Card removed"
msgstr "Karta wyjeta"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CNG_SDCARD
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5546
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change SD card"
msgstr ""
#. MSG_FILAMENTCHANGE c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5738
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change filament"
msgstr "Wymiana filamentu"
#. MSG_CHANGE_SUCCESS c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2171
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Change success!"
msgstr "Wymiana ok!"
#. MSG_CORRECTLY c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2223
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Changed correctly?"
msgstr "Wymiana ok?"
#. MSG_CHECKING_X c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7313
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking X axis"
msgstr "Kontrola osi X"
#. MSG_CHECKING_Y c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7314
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking Y axis"
msgstr "Kontrola osi Y"
#. MSG_SELFTEST_CHECK_Z c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7315
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking Z axis"
msgstr "Kontrola osi Z"
#. MSG_SELFTEST_CHECK_BED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking bed"
msgstr "Kontrola stolu"
#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7312
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking endstops"
msgstr "Kontrola krancowek"
#. MSG_CHECKING_FILE c=17
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7411
Update po files
2021-03-01 07:46:16 +00:00
msgid "Checking file"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Sprawdzanie pliku"
Update po files
2021-03-01 07:46:16 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_CHECK_HOTEND c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7318
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking hotend"
msgstr "Kontrola hotendu"
#. MSG_SELFTEST_CHECK_FSENSOR c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7320
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checking sensors"
msgstr "Kontrola czujnikow"
#. MSG_CHECKS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4773
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Checks"
msgstr "Testy"
#. MSG_NOT_COLOR c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2226
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Color not correct"
msgstr "Kolor zanieczysz."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_COMMUNITY_MADE c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Community made"
msgstr "Od spolecznosci"
#. MSG_CONTINUE_SHORT c=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cont."
msgstr "Kont."
#. MSG_COOLDOWN c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Cooldown"
msgstr "Chlodzenie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_COPY_SEL_LANG c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3671
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Copy selected language?"
msgstr "Skopiowac wybrany jezyk?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Crash"
msgstr "Zderzen"
#. MSG_CRASHDETECT c=13
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
#: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
#: ../../Firmware/ultralcd.cpp:5779
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Crash det."
msgstr "Wykr.zderzen"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DETECTED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Crash detected."
msgstr "Zderzenie wykryte"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3529
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr ""
"Wykrywanie zderzen\n"
"moze byc wlaczone\n"
"tylko w\n"
"trybie Normalnym"
#. MSG_CUT_FILAMENT c=17
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5575
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cut filament"
msgstr "Ciecie filamentu"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CUTTER c=9
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cutter"
msgstr "Nozyk"
#. MSG_MMU_CUTTING_FIL c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1048
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Cutting filament"
msgstr "Obcinanie fil."
#. MSG_DATE c=17
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1676
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Date:"
msgstr "Data:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_DIM c=6
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Dim"
msgstr "Sciemn"
Update po files
2021-03-01 07:46:16 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_DISABLE_STEPPERS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4810
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Disable steppers"
msgstr "Wylacz silniki"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:11
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet. "
"Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""
"Odleglosc dyszy od powierzchni druku nie jest skalibrowana. Postepuj zgodnie "
"z instrukcja: rozdzial Wprowadzenie - Kalibracja pierwszej warstwy."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4153
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""
"Chcesz powtorzyc ostatni krok i ponownie ustawic odleglosc miedzy dysza a "
"stolikiem?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EXTRUDER_CORRECTION c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4222
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "E-correct:"
msgstr "Korekcja-E:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ERROR c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "ERROR:"
msgstr "BLAD:"
#. MSG_FSENS_NOT_RESPONDING c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3570
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "BLAD: Czujnik filamentu nie odpowiada, sprawdz polaczenie."
#. MSG_EJECT_FILAMENT c=17
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5573
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Eject filament"
msgstr "Wysun filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EJECTING_FILAMENT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1076
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Ejecting filament"
msgstr "Wysuwanie filamentu"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ENDSTOP c=16
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6993
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Endstop"
msgstr "Krancowka"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6998
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Endstop not hit"
msgstr "Krancowka nie aktyw."
#. MSG_SELFTEST_ENDSTOPS c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6984
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Endstops"
msgstr "Krancowki"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EXTRUDER c=17
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3503
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Extruder"
msgstr "Ekstruder"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EXTRUDER_FAN_SPEED c=16
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7329
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Extruder fan:"
msgstr "WentHotend:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INFO_EXTRUDER c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1730
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Extruder info"
msgstr "Ekstruder - info"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FSENSOR_AUTOLOAD c=13
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
#: ../../Firmware/ultralcd.cpp:4258
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "F. autoload"
msgstr "Autolad. fil."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FS_ACTION c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4715
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS Action"
msgstr "Akcja FS"
#. MSG_FS_V_03_OR_OLDER c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:9482
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS v0.3 or older"
msgstr "FS 0.3 lub starszy"
#. MSG_FS_V_04_OR_NEWER c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:9474
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "FS v0.4 or newer"
msgstr "FS 0.4 lub nowszy"
#. MSG_FAIL_STATS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5597
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fail stats"
msgstr "Statystyki bledow"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FAIL_STATS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5600
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Fail stats MMU"
msgstr "Bledy MMU"
#. MSG_FALSE_TRIGGERING c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7039
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "False triggering"
msgstr "Falszywy alarm"
#. MSG_FAN_SPEED c=14
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5901
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fan speed"
msgstr "Predkosc went."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
#: ../../Firmware/ultralcd.cpp:7311
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fan test"
msgstr "Test wentylatora"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FANS_CHECK c=13
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5764
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fans check"
msgstr "Sprawd.went."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIL_RUNOUTS c=15
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
#: ../../Firmware/ultralcd.cpp:1337
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Fil. runouts"
msgstr "Konc.filamentu"
#. MSG_FSENSOR c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
#: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
#: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fil. sensor"
msgstr "Czuj. filam."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT c=17
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Filament"
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT_CLEAN c=20 r=2
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2301
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament extruding & with correct color?"
msgstr "Filament wychodzi z dyszy,kolor jest ok?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOT_LOADED c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2225
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament not loaded"
msgstr "Fil. nie zaladowany"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FILAMENT_SENSOR c=17
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
#: ../../Firmware/ultralcd.cpp:7338
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament sensor"
msgstr "Czujnik filamentu"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILAMENT_USED c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2373
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Filament used"
msgstr "Uzyty filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILE_INCOMPLETE c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7470
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "File incomplete. Continue anyway?"
msgstr "Plik niekompletny. Kontynowac?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FINISHING_MOVEMENTS c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5638
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Finishing movements"
msgstr "Konczenie druku"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_V2_CALIBRATION c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5432
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "First layer cal."
msgstr "Kal. 1. warstwy"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_SELFTEST c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4074
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "First, I will run the selftest to check most common assembly problems."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Najpierw wlacze selftest w celu sprawdzenia najczestszych problemow podczas "
"montazu."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FIX_ISSUE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:728
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Fix the issue and then press button on MMU unit."
msgstr "Rozwiaz problem i wcisnij przycisk na MMU."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FLOW c=15
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5732
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Flow"
msgstr "Przeplyw"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_PART_FAN c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Front print fan?"
msgstr "Przedni went. druku?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_CORRECTION_FRONT c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2762
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Front side[μm]"
msgstr "Przod [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FANS c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7028
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Front/left fans"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Przedni/lewy wentyl."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:418
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a different level. Continue?"
msgstr "G-code pociety dla innej wersji. Kontynuowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:424
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""
"G-code pociety na innym poziomie. Potnij model ponownie. Druk anulowany."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:471
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a different printer type. Continue?"
msgstr "G-code pociety dla innej drukarki. Kontynuowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:477
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again. "
"Print cancelled."
msgstr ""
"G-code pociety dla drukarki innego typu. Potnij model ponownie. Druk "
"anulowany."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:385
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "G-code pociety dla nowszego firmware. Kontynuowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:391
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""
"G-code pociety dla nowszego firmware. Zaktualizuj firmware. Druk anulowany."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_GCODE c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
#: ../../Firmware/ultralcd.cpp:4672
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Gcode"
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HW_SETUP c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "HW Setup"
msgstr "Ustawienia HW"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_HEATERTHERMISTOR c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6976
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heater/Thermistor"
msgstr "Grzalka/Termistor"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HEATING c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:570
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating"
msgstr "Grzanie..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:9395
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating disabled by safety timer."
msgstr "Grzanie wylaczone przez wyl. czasowy"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_HEATING_COMPLETE c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:573
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Heating done."
msgstr "Grzanie zakonczone"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""
"Czesc, jestem Twoja drukarka Original Prusa i3. Przeprowadze Cie przez "
"krotka kalibracje osi Z, po ktorej mozesz rozpoczac drukowanie."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WELCOME c=20 r=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
"Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z "
"ustawieniem?"
#. MSG_HIGH_POWER c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
#: ../../Firmware/ultralcd.cpp:5788
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "High power"
msgstr "Wysoka wyd"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_XYZ_CAL c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4083
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Przeprowadze teraz kalibracje XYZ. Zajmie ok. 12 min."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_Z_CAL c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4091
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "I will run z calibration now."
msgstr "Przeprowadze kalibracje Z."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ADDITIONAL_SHEETS c=20 r=9
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4161
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""
"Jesli masz dodatkowe plyty stalowe, to skalibruj ich ustawienia w menu "
"Ustawienia - Ustawienia HW - Plyty stalowe."
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
msgstr ""
#. MSG_INFO_SCREEN c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Info screen"
msgstr "Ekran informacyjny"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_INIT_SDCARD c=18
#: ../../Firmware/ultralcd.cpp:5553
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Init. SD card"
msgstr ""
#. MSG_INSERT_FILAMENT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2160
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Insert filament"
msgstr "Wprowadz filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INSERT_FIL c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6231
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""
"Wsun filament (nie uzywaj funkcji ladowania) do ekstrudera i nacisnij "
"pokretlo."
#. MSG_FILAMENT_LOADED c=20 r=2
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Is filament loaded?"
msgstr "Filament jest zaladowany?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STEEL_SHEET_CHECK c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Is steel sheet on heatbed?"
msgstr "Czy plyta stal. jest na podgrzew. stole?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ITERATION c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Iteration"
msgstr "Iteracja"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LAST_PRINT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1304
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Last print"
msgstr "Ost. wydruk"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LAST_PRINT_FAILURES c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
#: ../../Firmware/ultralcd.cpp:1334
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Last print failures"
msgstr "Ostatnie bledy druku"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LEFT c=10
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2504
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Left"
msgstr "Lewa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_EXTRUDER_FAN c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Left hotend fan?"
msgstr "Lewy went hotendu?"
#. MSG_BED_CORRECTION_LEFT c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2760
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Left side [μm]"
msgstr "Lewo [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BL_HIGH c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Level Bright"
msgstr "Poziom jasn."
#. MSG_BL_LOW c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Level Dimmed"
msgstr "Poziom ciem."
#. MSG_LIN_CORRECTION c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4834
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Lin. correction"
msgstr "Korekcja liniowa"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BABYSTEP_Z c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5501
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Live adjust Z"
msgstr "Ustaw. Live Z"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_LOAD_ALL c=18
#: ../../Firmware/ultralcd.cpp:5128
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Load all"
msgstr "Zalad. wszystkie"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOAD_FILAMENT c=17
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
#: ../../Firmware/ultralcd.cpp:5584
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Load filament"
msgstr "Ladowanie fil."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOAD_TO_NOZZLE c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5571
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Load to nozzle"
msgstr "Zaladuj do dyszy"
#. MSG_LOADING_COLOR c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2193
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loading color"
msgstr "Czyszcz. koloru"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOADING_FILAMENT c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
#: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
#: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loading filament"
msgstr "Laduje filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_LOOSE_PULLEY c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7016
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Loose pulley"
msgstr "Luzne kolo pasowe"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND_LOUD c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4470
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Loud"
msgstr "Glosny"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:880
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MK3 firmware detected on MK3S printer"
msgstr "Wykryto firmware MK3 w drukarce MK3S"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:873
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MK3S firmware detected on MK3 printer"
msgstr "Wykryto firmware MK3S w drukarce MK3"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_MODE c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4390
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU Mode"
msgstr "Tryb MMU"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:763
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Wznawianie pozycji."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:756
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Wznawiam nagrzewanie..."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_OK_RESUMING c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:774
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Wznawianie..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_FAILS c=15
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1201
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU fails"
msgstr "Bledy MMU"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_LOAD_FAILED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1248
Update all po files
2021-04-29 13:41:47 +00:00
msgid "MMU load failed"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Blad ladowania MMU"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_LOAD_FAILS c=15
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1202
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "MMU load fails"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Bledy lad. MMU"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_USER_ATTENTION c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:723
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU needs user attention."
msgstr "MMU wymaga uwagi uzytkownika."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_POWER_FAILS c=15
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1203
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU power fails"
msgstr "Zaniki zas. MMU"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MMU_CONNECTED c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1688
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "MMU2 connected"
msgstr "MMU podlaczone"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MAGNETS_COMP c=13
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Magnets comp."
msgstr "Kor. magnesow"
#. MSG_MAIN c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
#: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
#: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
#: ../../Firmware/ultralcd.cpp:5139 ../../Firmware/ultralcd.cpp:5162
#: ../../Firmware/ultralcd.cpp:5181 ../../Firmware/ultralcd.cpp:5725
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Main"
msgstr "Menu glowne"
#. MSG_MEASURED_SKEW c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2545
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Measured skew"
msgstr "Zmierz. skos"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3290
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Measuring reference height of calibration point"
msgstr "Okreslam wysokosc odniesienia punktu kalibracyjnego"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MESH c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mesh"
msgstr "Siatka"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MESH_BED_LEVELING c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4918
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mesh Bed Leveling"
msgstr "Poziomowanie stolu"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MODE c=6
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
#: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5785
#: ../../Firmware/ultralcd.cpp:5786 ../../Firmware/ultralcd.cpp:5787
#: ../../Firmware/ultralcd.cpp:5788 ../../Firmware/ultralcd.cpp:5872
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mode"
msgstr "Tryb"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3606
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Mode change in progress..."
msgstr "Trwa zmiana trybu..."
#. MSG_MODEL c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
#: ../../Firmware/ultralcd.cpp:4592
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Model"
msgstr ""
#. MSG_SELFTEST_MOTOR c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Motor"
msgstr "Silnik"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_X c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3500
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move X"
msgstr "Ruch osi X"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_Y c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3501
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move Y"
msgstr "Ruch osi Y"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_Z c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3502
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Move Z"
msgstr "Ruch osi Z"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MOVE_AXIS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4809
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Move axis"
msgstr "Ruch osi"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NA c=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
#: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
#: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
#: ../../Firmware/ultralcd.cpp:5844
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "N/A"
msgstr "N/D"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:199
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "New firmware version available:"
msgstr "Dostepna nowa wersja firmware:"
#. MSG_NO c=4
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
#: ../../Firmware/ultralcd.cpp:5996
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "No"
msgstr "Nie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NO_CARD c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5551
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "No SD card"
msgstr "Brak karty SD"
#. MSG_NO_MOVE c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:5374
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "No move."
msgstr "Brak ruchu."
#. MSG_NONE c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
#: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
#: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
#: ../../Firmware/ultralcd.cpp:4663 ../../Firmware/ultralcd.cpp:4672
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "None"
msgstr "Brak"
#. MSG_NORMAL c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
#: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Normal"
msgstr ""
#. MSG_SELFTEST_NOTCONNECTED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6977
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Not connected"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Nie podlaczono"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN_NO c=19
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Not spinning"
msgstr "Nie kreci sie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_V2_CAL c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3970
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Kalibruje odleglosc miedzy koncowka dyszy a powierzchnia druku."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4099
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Now I will preheat nozzle for PLA."
msgstr "Nagrzewam dysze dla PLA."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_TEST_PRINT c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4090
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Now remove the test print from steel sheet."
msgstr "Teraz zdejmij wydruk testowy ze stolu."
#. MSG_NOZZLE c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
#: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
#: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Nozzle"
msgstr "Dysza"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIAMETER c=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Nozzle d."
msgstr "Sr. dyszy"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_OFF c=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
#: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
#: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4842
#: ../../Firmware/ultralcd.cpp:5652 ../../Firmware/ultralcd.cpp:5749
#: ../../Firmware/ultralcd.cpp:5764 ../../Firmware/ultralcd.cpp:5775
#: ../../Firmware/ultralcd.cpp:5844 ../../Firmware/ultralcd.cpp:7852
#: ../../Firmware/ultralcd.cpp:7856
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Off"
msgstr "Wyl"
#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1532
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
"Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, "
"itp."
#. MSG_ON c=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
#: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
#: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
#: ../../Firmware/ultralcd.cpp:4842 ../../Firmware/ultralcd.cpp:5753
#: ../../Firmware/ultralcd.cpp:5764 ../../Firmware/ultralcd.cpp:5773
#: ../../Firmware/ultralcd.cpp:5844 ../../Firmware/ultralcd.cpp:7852
#: ../../Firmware/ultralcd.cpp:7856
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "On"
msgstr "Wl"
#. MSG_SOUND_ONCE c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Once"
msgstr "1-raz"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_PAUSED_THERMAL_ERROR c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
Update pot and po files
2022-09-14 07:16:16 +00:00
msgid "PAUSED THERMAL ERROR"
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_RUNNING c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1025
Update all po files
2021-04-29 13:41:47 +00:00
msgid "PID cal."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Kalibracja PID"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_FINISHED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1030
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PID cal. finished"
msgstr "Kal. PID zakonczona"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PID_EXTRUDER c=17
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4921
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PID calibration"
msgstr "Kalibracja PID"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_PREHEAT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:660
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "PINDA Heating"
msgstr "Grzanie sondy PINDA"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CALIBRATION c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "PINDA cal."
msgstr "Kalib. PINDA"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CAL_FAILED c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3369
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "PINDA calibration failed"
msgstr "Kalibracja temperaturowa nieudana"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3363
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr ""
"Kalibracja PINDA zakonczona i wlaczona. Moze byc wylaczona z menu Ustawienia "
"-> Kalib. PINDA"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAUSE c=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Pause"
msgstr "Pauza"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAUSE_PRINT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5517
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Pause print"
msgstr "Wstrzym. wydruku"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PAPER c=20 r=10
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""
"Umiesc kartke papieru na stole roboczym i podczas pomiaru pierwszych 4 "
"punktow. Jesli dysza zahaczy o papier, natychmiast wylacz drukarke."
#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""
"Przeczytaj nasz Podrecznik druku 3D aby naprawic problem. Potem wznow "
"Asystenta przez restart drukarki."
#. MSG_CHECK_IR_CONNECTION c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6258
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please check the IR sensor connection, unload filament if present."
msgstr "Sprawdz polaczenie czujnika IR, rozladuj filament, jesli zaladowany."
#. MSG_SELFTEST_PLEASECHECK c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6971
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please check:"
msgstr "Sprawdz:"
#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4156
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please clean heatbed and then press the knob."
msgstr "Oczysc powierzchnie druku i nacisnij pokretlo."
#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Dla prawidlowej kalibracji nalezy oczyscic dysze. Potwierdz guzikiem."
#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3953
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr "Wsun filament do ekstrudera i nacisnij pokretlo, aby go zaladowac."
#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3948
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""
"Wsun filament do pierwszego kanalu w MMU2 i nacisnij pokretlo, aby go "
"zaladowac."
#. MSG_PLEASE_LOAD_PLA c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3871
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please load filament first."
msgstr "Najpierw zaladuj filament."
#. MSG_CHECK_IDLER c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3548
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please open idler and remove filament manually."
msgstr ""
"Prosze odciagnac dzwignie dociskowa ekstrudera i recznie usunac filament."
#. MSG_PLACE_STEEL_SHEET c=20 r=5
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4093
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please place steel sheet on heatbed."
msgstr "Prosze umiescic plyte stalowa na stole podgrzewanym."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRESS_TO_UNLOAD c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:74
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please press the knob to unload filament"
msgstr "Nacisnij pokretlo aby rozladowac filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PULL_OUT_FILAMENT c=20 r=4
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please pull out filament immediately"
msgstr "Wyciagnij filament teraz"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_EJECT_REMOVE c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1082
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please remove filament and then press the knob."
msgstr "Wyciagnij filament i wcisnij pokretlo."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4089
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please remove shipping helpers first."
msgstr "Najpierw usun zabezpieczenia transportowe"
#. MSG_REMOVE_STEEL_SHEET c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:79
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please remove steel sheet from heatbed."
msgstr "Prosze zdjac plyte stalowa z podgrzewanego stolu."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RUN_XYZ c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:4869
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please run XYZ calibration first."
msgstr "Prosze najpierw uruchomic kalibracje XYZ"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6255
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please unload the filament first, then repeat this action."
msgstr "Najpierw rozladuj filament, nastepnie powtorz czynnosc."
#. MSG_UPDATE_MMU2_FW c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:1002
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Prosze zaktualizowac Firmware MMU2. Czekam na reset."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:203
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Please upgrade."
msgstr "Prosze zaktualizowac"
#. MSG_PLEASE_WAIT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Please wait"
msgstr "Prosze czekac"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_POWER_FAILURES c=15
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Power failures"
msgstr "Zaniki zasil."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEAT c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5510
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheat"
msgstr "Grzanie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEAT_NOZZLE c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheat the nozzle!"
msgstr "Nagrzej dysze!"
#. MSG_WIZARD_HEATING c=20 r=3
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating nozzle. Please wait."
msgstr "Nagrzewanie dyszy. Prosze czekac."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_CUT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1996
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheating to cut"
msgstr "Nagrzew. obciecia"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_EJECT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1993
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Preheating to eject"
msgstr "Nagrzew. wysuniecia"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_LOAD c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1984
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating to load"
msgstr "Nagrzew.do ladowania"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PREHEATING_TO_UNLOAD c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1989
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Preheating to unload"
msgstr "Nagrzew. do rozlad."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRESS_KNOB c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1817
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob"
msgstr "Wcisnij pokretlo"
#. MSG_PRESS_TO_PREHEAT c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:11608
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob to preheat nozzle and continue."
msgstr "Wcisnij pokretlo aby rozgrzac dysze i kontynuowac."
#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:727
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Press the knob to resume nozzle temperature."
msgstr "Wcisnij pokretlo aby wznowic podgrzewanie dyszy."
#. MSG_PRINT_ABORTED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Print aborted"
msgstr "Druk przerwany"
#. MSG_PRINT_FAN_SPEED c=16
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7332
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print fan:"
msgstr "WentWydruk:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CARD_MENU c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print from SD"
msgstr "Druk z karty SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRINT_PAUSED c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:874
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Print paused"
msgstr "Druk wstrzymany"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRINT_TIME c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2374
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Print time"
msgstr "Czas druku"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRINTER_IP c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1719
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Printer IP Addr:"
msgstr "Adr. IP drukarki:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First "
"steps, section Calibration flow."
msgstr ""
"Drukarka nie byla jeszcze kalibrowana. Kieruj sie Samouczkiem: rozdzial "
"Pierwsze Kroki, sekcja Konfiguracja przed drukowaniem."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:299
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Srednica dyszy drukarki rozni sie od tej w G-code. Kontynuowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/util.cpp:305
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Printer nozzle diameter differs from the G-code. Please check the value in "
"settings. Print cancelled."
msgstr ""
"Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk anulowany."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RPI_PORT c=13
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "RPi port"
msgstr "Port RPi"
#. MSG_BED_CORRECTION_REAR c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2763
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Rear side [μm]"
msgstr "Tyl [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RECOVERING_PRINT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:10951
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Recovering print"
msgstr "Wznawianie wydruku"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/mmu.cpp:831
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Remove old filament and press the knob to start loading new filament."
msgstr "Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RENAME c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5434
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Rename"
msgstr "Zmien nazwe"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RESET c=14
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5435
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Reset"
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CALIBRATE_BED_RESET c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4925
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Reset XYZ calibr."
msgstr "Reset kalibr. XYZ"
#. MSG_RESUME_PRINT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Resume print"
msgstr "Wznowic wydruk"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RESUMING_PRINT c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Resuming print"
msgstr "Wznawianie druku"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RIGHT c=10
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2505
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Right"
msgstr "Prawa"
#. MSG_BED_CORRECTION_RIGHT c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2761
Update all po files
2022-02-08 13:48:16 +00:00
msgid "Right side[μm]"
msgstr "Prawo [μm]"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_RERUN c=20 r=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3892
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""
"Wlaczenie Asystenta usunie obecne dane kalibracyjne i zacznie od poczatku. "
"Kontynuowac?"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_RUNOUTS c=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1279
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Runouts"
msgstr "Konce f"
#. MSG_SD_CARD c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
#: ../../Firmware/ultralcd.cpp:4424
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "SD card"
msgstr "Karta SD"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STOPPED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "STOPPED."
msgstr "ZATRZYMANO."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Searching bed calibration point"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Szukam punktu kalib. na stole"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELECT c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5427
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select"
msgstr "Wybierz"
#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3974
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr ""
"Wybierz filament do Kalibracji Pierwszej Warstwy i potwierdz w menu "
"ekranowym."
#. MSG_SELECT_EXTRUDER c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select extruder:"
msgstr "Wybierz ekstruder:"
#. MSG_SELECT_FILAMENT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select filament:"
msgstr "Wybierz filament:"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_SELECT_LANGUAGE c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4849
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Select language"
msgstr "Wybor jezyka"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SEL_PREHEAT_TEMP c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4130
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select nozzle preheat temperature which matches your material."
msgstr "Wybierz temperature grzania dyszy odpowiednia dla materialu."
#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3979
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Select temperature which matches your material."
msgstr "Wybierz temperature, ktora odpowiada Twojemu filamentowi."
#. MSG_SELFTEST_OK c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6530
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Self test OK"
msgstr "Selftest OK"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_START c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6298
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Self test start"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Selftest startuje"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4912
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest"
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_ERROR c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6970
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest error!"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Blad selftest!"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAILED c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Selftest failed"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Selftest nieudany"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FORCE_SELFTEST c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1564
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Zostanie uruchomiony Selftest aby dokladnie skalibrowac punkt bazowy bez "
"krancowek"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_INFO_SENSORS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1731
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sensor info"
msgstr "Info o sensorach"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FS_VERIFIED c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6262
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sensor verified, remove the filament now."
msgstr "Czujnik sprawdzony, wyciagnij filament."
#. MSG_SET_TEMPERATURE c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2781
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Set temperature:"
msgstr "Ustaw temperature:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SETTINGS c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
#: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
#: ../../Firmware/ultralcd.cpp:5888
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Settings"
msgstr "Ustawienia"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SEVERE_SKEW c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2548
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Severe skew"
msgstr "Znaczny skos"
#. MSG_SHEET c=10
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:60
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sheet"
msgstr "Plyta"
#. MSG_SHEET_OFFSET c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3832
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""
"Plyta %.7s\n"
"Z offset: %+1.3fmm\n"
"%cKontynuowac\n"
"%cReset"
#. MSG_SHOW_END_STOPS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4923
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Show end stops"
msgstr "Pokaz krancowki"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SILENT c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Silent"
msgstr "Cichy"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SLIGHT_SKEW c=14
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2547
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Slight skew"
msgstr "Lekki skos"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FILE_CNT c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/cardreader.cpp:818
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""
"Niektore pliki nie zostana posortowane. Max. liczba plikow w 1 folderze = "
"100."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_ZLEVELING_ENFORCED c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3057
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Wykryto problem, wymuszono poziomowanie osi Z."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Sort"
msgstr "Sort."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORTING_FILES c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:96
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Sorting files"
msgstr "Sortowanie plikow"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SOUND c=9
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
#: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Sound"
msgstr "Dzwiek"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SPEED c=15
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5726
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Speed"
msgstr "Predkosc"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_FAN_YES c=19
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Spinning"
msgstr "Kreci sie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TEMP_CAL_WARNING c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:4882
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Potrzebna jest stabilna temperatura otoczenia 21-26C i stabilne podloze."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STATISTICS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5593
Update all po files
2021-04-29 13:41:47 +00:00
msgid "Statistics"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr "Statystyki"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STEALTH c=7
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Stealth"
msgstr "Cichy"
#. MSG_STEEL_SHEETS c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5424
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Steel sheets"
msgstr "Plyty stalowe"
#. MSG_STOP_PRINT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5995
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Stop print"
msgstr "Przerwanie druku"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_STRICT c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
#: ../../Firmware/ultralcd.cpp:4669
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Strict"
msgstr "Restr."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SUPPORT c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5602
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Support"
msgstr "Wsparcie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_SWAPPED c=16
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:7029
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Swapped"
msgstr "Zamieniono"
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_THERMAL_ANOMALY c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
Update pot and po files
2022-09-14 07:16:16 +00:00
msgid "THERMAL ANOMALY"
msgstr ""
#. MSG_TM_AUTOTUNE_FAILED c=20
#: ../../Firmware/temperature.cpp:2899
msgid "TM autotune failed"
msgstr ""
#. MSG_TEMP_MODEL_AUTOTUNE c=20
#: ../../Firmware/temperature.cpp:2884
msgid "Temp. model autotune"
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TEMPERATURE c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4805
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Temperature"
msgstr "Temperatura"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MENU_TEMPERATURES c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1737
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Temperatures"
msgstr "Temperatury"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_V2_CAL_2 c=20 r=12
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3982
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""
"Drukarka zacznie drukowanie linii w ksztalcie zygzaka. Ustaw optymalna "
"wysokosc obracajac pokretlo. Porownaj z ilustracjami w Podreczniku (rozdzial "
"Kalibracja)."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""
"Musimy przeprowadzic kalibracje Z. Kieruj sie Samouczkiem: rozdzial Pierwsze "
"Kroki, sekcja Kalibracja."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SORT_TIME c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Time"
msgstr "Czas"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TIMEOUT c=12
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Timeout"
msgstr "Wyl. czas."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL c=6
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1305
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Total"
msgstr "Suma"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_FAILURES c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Total failures"
msgstr "Suma bledow"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_FILAMENT c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2395
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Total filament"
msgstr "Zuzycie filamentu"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TOTAL_PRINT_TIME c=19
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2396
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Total print time"
msgstr "Laczny czas druku"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TUNE c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5508
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Tune"
msgstr "Strojenie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_FILAMENT c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5586
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Unload filament"
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Rozladowanie fil"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOADING_FILAMENT c=20
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:5205
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Unloading filament"
msgstr "Rozladowuje filament"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FIL_FAILED c=20 r=5
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6266
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Verification failed, remove the filament and try again."
msgstr "Niepowodzenie sprawdzenia, wyciagnij filament i sprobuj ponownie."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MENU_VOLTAGES c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1740
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Voltages"
msgstr "Napiecia"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3542
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""
"UWAGA:\n"
"Wykrywanie zderzen\n"
"wylaczone w\n"
"trybie Stealth"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_USERWAIT c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:4087
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wait for user..."
Update all po files
2021-04-29 13:41:47 +00:00
msgstr "Czekam na uzytk. ..."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WAITING_TEMP_PINDA c=20 r=3
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2889
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Waiting for PINDA probe cooling"
msgstr "Czekam az spadnie temp. sondy PINDA"
#. MSG_WAITING_TEMP c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2921
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Waiting for nozzle and bed cooling"
msgstr "Oczekiwanie na wychlodzenie dyszy i stolu"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WARN c=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
#: ../../Firmware/ultralcd.cpp:4666
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Warn"
msgstr "Ostrzez"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_BOTH c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1524
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: both printer type and motherboard type changed."
msgstr "Ostrzezenie: typ drukarki i plyta glowna ulegly zmianie."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_MOTHERBOARD c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1516
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: motherboard type changed."
msgstr "Ostrzezenie: plyta glowna ulegla zmianie."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_CHANGED_PRINTER c=20 r=4
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:1520
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Warning: printer type changed."
msgstr "Ostrzezenie: rodzaj drukarki ulegl zmianie"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:3539
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Was filament unload successful?"
msgstr "Rozladowanie fil. ok?"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_SELFTEST_WIRINGERROR c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wiring error"
msgstr "Blad polaczenia"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD c=17
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4903
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Wizard"
msgstr "Asystent"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_X_CORRECTION c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4218
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "X-correct:"
msgstr "Korekcja-X:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
Update pot and po files
2022-09-14 07:16:16 +00:00
#. MSG_XFLASH c=18
#: ../../Firmware/ultralcd.cpp:5604
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XFLASH init"
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_XYZ_DETAILS c=18
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1729
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ cal. details"
msgstr "Szczegoly kal. XYZ"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3341
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "Kalibracja XYZ pomyslna. Skos bedzie automatycznie korygowany."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3338
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3319
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Kalibr. XYZ niedokladna. Przednie punkty kalibr. nieosiagalne."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3325
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"XYZ calibration compromised. Left front calibration point not reachable."
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3322
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr "Kalibracja XYZ niedokladna. Prawy przedni punkt nieosiagalny."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3301
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr "Kalibracja XYZ nieudana. Nie znaleziono punktow kalibracyjnych."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3307
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Front calibration points not reachable."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Kalibr. XYZ nieudana. Przednie punkty kalibr. nieosiagalne. Nalezy poprawic "
"montaz drukarki."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3313
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ calibration failed. Left front calibration point not reachable."
msgstr ""
#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3332
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Kalibracja XYZ nieudana. Sprawdz przyczyny i rozwiazania w instrukcji."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3310
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "XYZ calibration failed. Right front calibration point not reachable."
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgstr ""
"Kalibr. XYZ nieudana. Prawy przedni punkt nieosiagalny. Nalezy poprawic "
"montaz drukarki."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:3335
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
#. MSG_Y_DIST_FROM_MIN c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2502
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Y distance from min"
msgstr "Dystans od 0 w osi Y"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Y_CORRECTION c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4219
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgid "Y-correct:"
msgstr "Korekcja-Y:"
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_YES c=4
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
#: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Yes"
msgstr "Tak"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FW_VERSION_ALPHA c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:846
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"You are using firmware alpha version. This is development version. Using "
"this version is not recommended and may cause printer damage."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
msgstr ""
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_FW_VERSION_BETA c=20 r=8
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/Marlin_main.cpp:847
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid ""
"You are using firmware beta version. This is development version. Using this "
"version is not recommended and may cause printer damage."
msgstr ""
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_WIZARD_QUIT c=20 r=8
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr ""
"Zawsze mozesz uruchomic Asystenta ponownie przez Kalibracja -> Asystent."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Z_CORRECTION c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:4220
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Z-correct:"
msgstr "Korekcja-Z:"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_Z_PROBE_NR c=14
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "Z-probe nr."
msgstr "Ilosc Pomiarow"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_MEASURED_OFFSET c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2573
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "[0;0] point offset"
msgstr "[0;0] przesun.punktu"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_PRESS c=20 r=2
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:2162
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "and press the knob"
msgstr "i nacisnij pokretlo"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TO_LOAD_FIL c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1824
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "to load filament"
msgstr "aby zaladow. fil."
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_TO_UNLOAD_FIL c=20
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1828
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "to unload filament"
msgstr "aby rozlad. filament"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_UNKNOWN c=13
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:1696
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "unknown"
msgstr "nieznane"
MK3 3 9 0 missing translations (#2646) * Add and update missing translations - updated in Firmware/ files the missing `c=xx` column and `r=yy` rows. - added missing translations to lang/lang_en*.txt Everyone is developing and adding messages to serial and especially to LCD PLEASE add `//// c=xx` or `//// c=xx r=yy` comments. Preparing translations files without that information is a pain in the ... and takes way more time for somebody else to review to code as it would take you. * No need to have `MSG_abcde` again in comments `////` in `messages.c` * German translation * Missed a space * Use the same format as somewhere else * French translation. I am not a native French speaking person, so please excuse my mistakes I may have done. * Spanish translation. I am not a native Spanish speaking person, so please excuse my mistakes I may have done. * CZ translation * Fix typos * Another fix It is Dimmwert and not Dim Wert * Fix issues reported by `lang-check.py` * Add "difficult" messages containing `%` * Updated MSG and German translation * removed a translation as it breaks the language selection * No need to wait until any-key is pressed * No need to wait any-key is pressed * Fixed two LF issues * Updated PO files ready to be send to translators * Add missing italian translations * Improve some existing italian translations * More italian fixes * More italian fixes * Add exceptions in editorconfig for po files to avoid recoding * Fix typo Thanks @DRracer for pointing out * Italian translation by @wavexx * Update po/new/*.po files * Update after merging MK3 branch * Update French translation and some c=xx comments Big thanks to @awenelo @carlin57 for helping with the french translations and their comments. * Update po files after French translation * Fixed most `lang-check.py` reported translation errors for Czech and German. Two Czech have to be reviewed as these are too long. One German is correct as it is shown in c=20 r=2 but is 1 char longer than this to split the message. One German translation seams to be to long but have to review the actual max length * Fix `lang-check.py` Spanish translation errors There have been quite lot TOO long messages, Can't imagine that nobody every complained about that. * Fix `lang-check.py` Italian translations errors * Update not_tran and not_used files after fixing several translations * Some more error fixes and update of `po` files * Polish translation * Czech updated * Fix typo * no need to translate `\x00` if it is the same * Polish: Runouts->Koniec * Polish: Runouts->Konce f ... hopefully the last change * Added MK2.5/s auto power mode to eeprom doxygen * Final updates. - Compiled all versions with multi-languages - Compiled all versions with EN_ONLY - updated all /lang/po/Firmware*.* files * Add crlf attributes for po files As done for editorconfig, this similarly forces git to handle po files consistently in DOS format. * Further improvent of IT translations * Updated translation Added cleanup to PF-build.sh * remove lang/not_tran* and lang/not_used mistakenly added into the PR Co-authored-by: DRracer <drracer@seznam.cz> Co-authored-by: Yuri D'Elia <wavexx@thregr.org> Co-authored-by: D.R.racer <drracer@drracer.eu>
2020-05-12 20:23:40 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_IR_UNKNOWN c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "unknown state"
msgstr "Stan nieznany"
Update po files after fixing lang-export and lang-import
2021-12-21 13:31:04 +00:00
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
#. MSG_REFRESH c=18
Add MSG_ALWAYS
2022-09-14 07:30:37 +00:00
#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
Update pot and po files
2022-09-14 07:16:16 +00:00
#: ../../Firmware/ultralcd.cpp:6088
New PO-based language translation support (#3471) * lang: Add a PO language extractor with FW metadata support Implement a straight-to-po language extractor which supports our custom language requirements: - _i/_I/ISTR for text string definitions - _T for catalog translations (with back-reference support) - //// EOL comments with: - MSG_ catalog entry name identifiers - c=X r=Y annotations for screen dimensioning checks - Crude support for commented lines All source locations are correctly referenced in the PO, with the metadata colleted in the comment for further processing. Several checks are implemented already during extraction: - Correct catalog name assignment (no duplicates) - Metadata checks for each entry Further checks will be implemented by directly checking the translated PO file. Requires "polib" and "regex" python modules. * lang: Adapt lang-check to work directly on PO/POT files * lang: Allow lang-extract to generate stable (pre-sorted) output directly * lang: Further extend lang-extract consistency/error checking - Do not parse inside preprocessor conditionals - Distinguish between references and definitions - Warn about missing references and definitions * lang: lang-extract: warn about incorrect PROGMEM assignments Check that ISTR is used along with PROGMEM_I1 in an attempt to spot useless translated catalogs. * lang: lang-extract: Improved handling of same-line translations Correctly reference metadata on same-line translations. * lang: lang-extract: Handle _O as a cat-ref https://github.com/prusa3d/Prusa-Firmware/pull/3434 * lang: lang-extract: Warn about unused catalog definitions * lang: lang-extract: Allow propagating translation comments via // The definition: code //// definition [// comment] will check [definition] as before, but blindly accumulate // comment. The comment is then re-appended back into the PO files for translators with the form: definition comment comment... * lang: Fix incorrect display definitions * lang: lang-extract: Check source encoding/charmap * lang: Translate the degree symbol * lang: Unbreak/cleanup DEBUG_SEC_LANG * lang: Improve meaning of comment * lang: Split charset conversions into an aux lib for future use * lang: Implement lang-map.py to extract the translation symbol map - Extracts the translatable symbol map for further use - Computes a stable "language signature" from the map itself - Optionally patches the binary update the symbols * lang: Check for translation recoding problems * lang: Implement a transliteration map to post-process translations TRANS_CHARS is now used to replace unavailable symbols to the source encoding, only while producing the language catalog. * lang: Handle/check character replacements in lang-check Filter the translation through TRANS_CHARS, so that the preview and length check are performed correctly for expanding replacements such as 'ß' to 'ss'. * lang: Implement lang-build.py to generate the final language catalog * Cleanup .gitignore * lang: Drop txt language files * lang: Remove outdated translation scripts and obsolete docs * lang: Update build scripts for new infrastructure * lang: [no] Integrate accents from po/new/no.po We now support accents natively * lang: Remove redundant directory po/new/ * lang: Fix encoding of LCD characters in PO files * lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL * lang: Sort and reformat PO files for further massaging * lang: Switch to developer (dot) comments for PO metadata * lang: Allow the IGNORE annotation to skip extraction * lang: Fix missing/broken language metadata in sources * lang: Add update-pot.sh and regenerate po/Firmware.pot * lang: Add update-po.sh and refresh all PO files * lang: Add summary documentation about the new translation workflow * Add more ignored files * CI: Add new required dependencies to travis * lang: lang-build: Improve warning message "referenced" was really meaning that data is being duplicated. * lang: Respect the language order as defined in config.sh This correctly splits normal and community-made entries during language selection. * lang: More typos in the documentation * lang: Check for the maximum size of each language Each table needs to fit within LANG_SIZE_RESERVED * lang: Properly align _SEC_LANG to page boundaries ... instead of relying on _SEC_LANG_TABLE to calculate the offset * lang: Build support for dual-language hex files Detect the printer type by checking the current variant type. On printers with no xflash (MK2*), generate one hex file for each additional language file by patching the built-in secondary language table during the build process * lang: Mention lang-patchsec.py * lang: Use color() instead of tput for clarity * lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb * lang: Consistent use of redirection in config.sh * lang: Stricter variant-type check for xflash support * lang: Output size stats when building double-language hex files * lang: Respect NO_COLOR in lang-check.py * lang: Check for repeated/incorrect annotations Catch errors such as "c=1 c=2" * lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations * lang: [it] Improve MSG_*_SKEW translation * lang: Use INTLHEX instead of OUTHEX_P/S for configuration We already have OUTHEX which is the compiled firmware. Use INTLHEX for the final internationalized firmware, which is less confusing. Also, assume it being a prefix for all generated hex files, which reduces the number of variables set. * lang: Move lang_map to lib.io for further use * lang: lang-check: Accept a firmware map file to suppress unused string warnings * lang: Use the map file to reduce useless warnings during fw-build * lang: lang-check: Also suppress unused empty annotations * lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation Refresh pot file * lang: lang-check: Do not warn about same-word translations by default Do not warn when one-word translations such as "No" result in "No" also in other languages, since this is common in latin languages. Allow to re-enable the warning with --warn-same * lang: lang-build: Handle same-source/translation efficiently * lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings Instead of displaying a warning, supress the warning and explicitly translate each entry using english (which is the common/acceptable word in these cases). * lang: [it] Suppress more warnings * lang: lang-check: Add intermediate "suggest" warning category Warnings in the "suggest" category as shown as [S] as based on pure speculation from the checking tool, such as the translation being significantly shorter than the original. As a result, they can be suppressed with --no-suggest * lang: Return translation status from lang-check - 0 if the translation only contains suggestions - 1 if the translation contains warnings or errors Check for the exit status in fw-build.sh, but do nothing at the moment except printing a non-fatal error. * lang: Remove "trim_trailing_whitespace=false" for po files PO files got cleaned up/rewritten. We can now ensure they stay consistent. * lang: [sv] Re-integrate changes from 70c73cb * lang: [no] Reintegrate changes from @pkg2000
2022-06-16 13:03:30 +00:00
msgid "🔃Refresh"
msgstr "🔃Odswiezac"
Update pot and po files
2022-09-14 07:16:16 +00:00
#~ msgid "Crash detected. Resume print?"
#~ msgstr "Wykryto zderzenie. Wznowic druk?"
#~ msgid "M117 First layer cal."
#~ msgstr "M117 Kal. 1. warstwy"
Reference in a new issue Copy permalink