Prusa-Firmware/Firmware/Dcodes.h

#ifndef DCODES_H
#define DCODES_H

extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock)
extern void dcode_0(); //D0 - Reset
extern void dcode_1(); //D1 - Clear EEPROM
extern void dcode_2(); //D2 - Read/Write RAM

#ifdef DEBUG_DCODE3
extern void dcode_3(); //D3 - Read/Write EEPROM
#endif //DEBUG_DCODE3

extern void dcode_4(); //D4 - Read/Write PIN

#ifdef DEBUG_DCODE5
extern void dcode_5(); //D5 - Read/Write FLASH
#endif //DEBUG_DCODE5

extern void dcode_6(); //D6 - Read/Write external FLASH
extern void dcode_7(); //D7 - Read/Write Bootloader
extern void dcode_8(); //D8 - Read/Write PINDA
extern void dcode_9(); //D9 - Read/Write ADC (Write=enable simulated, Read=disable simulated)
extern void dcode_10(); //D10 - XYZ calibration = OK
extern void dcode_12(); //D12 - Log time. Writes the current time in the log file.

#ifdef HEATBED_ANALYSIS
extern void dcode_80(); //D80 - Bed check. This command will log data to SD card file "mesh.txt".
extern void dcode_81(); //D81 - Bed analysis. This command will log data to SD card file "wldsd.txt".
#endif //HEATBED_ANALYSIS

	extern void dcode_106(); //D106 - Print measured fan speed for different pwm values

#ifdef TMC2130
	extern void dcode_2130(); //D2130 - TMC2130
#endif //TMC2130

#ifdef PAT9125
	extern void dcode_9125(); //D9125 - PAT9125
#endif //PAT9125


#endif //DCODES_H
Line endings to LF (./le.sh lf) 2017-10-03 11:01:59 +00:00			`#ifndef DCODES_H`
			`#define DCODES_H`

Fsensor synchronization and triggering improved Watchdog implemented (4s interval, triggered from manage_heater) Stallguard sensitivity for XY decreased by 1 Extruder current adjusted to 5.5kg force Build number = 111 2017-11-24 20:53:35 +00:00			`extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock)`
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107 2017-11-13 17:45:11 +00:00			`extern void dcode_0(); //D0 - Reset`
			`extern void dcode_1(); //D1 - Clear EEPROM`
			`extern void dcode_2(); //D2 - Read/Write RAM`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00
			`#ifdef DEBUG_DCODE3`
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107 2017-11-13 17:45:11 +00:00			`extern void dcode_3(); //D3 - Read/Write EEPROM`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00			`#endif //DEBUG_DCODE3`

SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107 2017-11-13 17:45:11 +00:00			`extern void dcode_4(); //D4 - Read/Write PIN`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00
			`#ifdef DEBUG_DCODE5`
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107 2017-11-13 17:45:11 +00:00			`extern void dcode_5(); //D5 - Read/Write FLASH`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00			`#endif //DEBUG_DCODE5`

Build Number = 108 FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes 2017-11-16 19:51:50 +00:00			`extern void dcode_6(); //D6 - Read/Write external FLASH`
			`extern void dcode_7(); //D7 - Read/Write Bootloader`
			`extern void dcode_8(); //D8 - Read/Write PINDA`
new module adc (analog2digital) temperature.cpp - adc sampling state machine removed new dcode D9 (adc read/write + simulator) temporarily DEBUG_DISABLE_STARTMSGS because UI blocked SILENT_MAX_FEEDRATE reduced to 172mm/s hexfile removed build number 137x 2017-12-20 12:42:20 +00:00			`extern void dcode_9(); //D9 - Read/Write ADC (Write=enable simulated, Read=disable simulated)`
Build Number = 108 FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes 2017-11-16 19:51:50 +00:00			`extern void dcode_10(); //D10 - XYZ calibration = OK`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00			`extern void dcode_12(); //D12 - Log time. Writes the current time in the log file.`

			`#ifdef HEATBED_ANALYSIS`
			`extern void dcode_80(); //D80 - Bed check. This command will log data to SD card file "mesh.txt".`
			`extern void dcode_81(); //D81 - Bed analysis. This command will log data to SD card file "wldsd.txt".`
			`#endif //HEATBED_ANALYSIS`

			`extern void dcode_106(); //D106 - Print measured fan speed for different pwm values`
PAT9125 - sampled only Y value, new debug code D9125. FSensor - synchronous sampling and new algorithm build number = 103 2017-10-24 17:45:15 +00:00
fix - conditional translation for DEBUG build 2018-02-08 17:56:15 +00:00			`#ifdef TMC2130`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00			`extern void dcode_2130(); //D2130 - TMC2130`
fix - conditional translation for DEBUG build 2018-02-08 17:56:15 +00:00			`#endif //TMC2130`

			`#ifdef PAT9125`
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h` 2020-03-30 14:53:58 +00:00			`extern void dcode_9125(); //D9125 - PAT9125`
fix - conditional translation for DEBUG build 2018-02-08 17:56:15 +00:00			`#endif //PAT9125`

Line endings to LF (./le.sh lf) 2017-10-03 11:01:59 +00:00
			`#endif //DCODES_H`