3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #368 from XPila/MK3

Browse Source 
Missing serial characters debuging
This commit is contained in:
XPila 2018-01-02 20:56:11 +01:00 committed by GitHub
commit 00698b00b6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 47 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Configuration.h
View File

@ -11,7 +11,7 @@
#define FW_version "3.1.1-RC4"
#define FW_build 143
//#define FW_build --BUILD-NUMBER--
#define FW_version_build FW_version " b" STR(FW_build) "a"
#define FW_version_build FW_version " b" STR(FW_build) "b"
#define FW_PRUSA3D_MAGIC "PRUSA3DFW"

6
Firmware/ConfigurationStore.cpp
View File

@ -129,10 +129,13 @@ void Config_StoreSettings(uint16_t offset, uint8_t level)
#endif
#endif
#ifdef LIN_ADVANCE
if (level >= 10) {
EEPROM_WRITE_VAR(i, extruder_advance_k);
EEPROM_WRITE_VAR(i, advance_ed_ratio);
}
#endif //LIN_ADVANCE
/*MYSERIAL.print("Top address used:\n");
MYSERIAL.print(i);
MYSERIAL.print("\n");
@ -365,11 +368,14 @@ void Config_RetrieveSettings(uint16_t offset, uint8_t level)
EEPROM_READ_VAR(i, filament_size[2]);
#endif
#endif
#ifdef LIN_ADVANCE
if (level >= 10) {
EEPROM_READ_VAR(i, extruder_advance_k);
EEPROM_READ_VAR(i, advance_ed_ratio);
}
calculate_volumetric_multipliers();
#endif //LIN_ADVANCE
// Call updatePID (similar to when we have processed M301)
updatePID();
SERIAL_ECHO_START;

2
Firmware/Configuration_adv.h
View File

@ -318,7 +318,7 @@
* K=0 means advance disabled.
* See Marlin documentation for calibration instructions.
*/
#define LIN_ADVANCE
//#define LIN_ADVANCE
#ifdef LIN_ADVANCE
#define LIN_ADVANCE_K 0 //Try around 45 for PLA, around 25 for ABS.

3
Firmware/Configuration_prusa.h
View File

@ -124,6 +124,9 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
//#define DEBUG_XSTEP_DUP_PIN 21 //duplicate x-step output to pin 21 (SCL on P3)
//#define DEBUG_YSTEP_DUP_PIN 21 //duplicate y-step output to pin 21 (SCL on P3)
//#define DEBUG_BLINK_ACTIVE
#define DEBUG_DISABLE_FANCHECK //disable fan check (no ISR INT7, check disabled)
#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
#define DEBUG_DUMP_TO_2ND_SERIAL //dump received characters to 2nd serial line
#endif

6
Firmware/MarlinSerial.cpp
View File

@ -68,6 +68,9 @@ SIGNAL(M_USARTx_RX_vect)
unsigned char c = M_UDRx;
if (selectedSerialPort == 0)
store_char(c);
#ifdef DEBUG_DUMP_TO_2ND_SERIAL
UDR1 = c;
#endif //DEBUG_DUMP_TO_2ND_SERIAL
}
}
#ifndef SNMM
@ -86,6 +89,9 @@ SIGNAL(USART1_RX_vect)
unsigned char c = UDR1;
if (selectedSerialPort == 1)
store_char(c);
#ifdef DEBUG_DUMP_TO_2ND_SERIAL
M_UDRx = c;
#endif //DEBUG_DUMP_TO_2ND_SERIAL
}
}
#endif

22
Firmware/MarlinSerial.h
View File

@ -112,14 +112,14 @@ class MarlinSerial //: public Stream
*/
void write(uint8_t c)
{
if (selectedSerialPort == 0) {
while (!((M_UCSRxA) & (1 << M_UDREx)))
;
if (selectedSerialPort == 0)
{
while (!((M_UCSRxA) & (1 << M_UDREx)));
M_UDRx = c;
}
else if (selectedSerialPort == 1) {
while (!((UCSR1A) & (1 << UDRE1)))
;
else if (selectedSerialPort == 1)
{
while (!((UCSR1A) & (1 << UDRE1)));
UDR1 = c;
}
}
@ -144,7 +144,10 @@ class MarlinSerial //: public Stream
rx_buffer.buffer[rx_buffer.head] = c;
rx_buffer.head = i;
}
selectedSerialPort = 0;
//selectedSerialPort = 0;
#ifdef DEBUG_DUMP_TO_2ND_SERIAL
UDR1 = c;
#endif //DEBUG_DUMP_TO_2ND_SERIAL
}
}
} else if(selectedSerialPort == 1) {
@ -165,7 +168,10 @@ class MarlinSerial //: public Stream
rx_buffer.buffer[rx_buffer.head] = c;
rx_buffer.head = i;
}
selectedSerialPort = 1;
//selectedSerialPort = 1;
#ifdef DEBUG_DUMP_TO_2ND_SERIAL
M_UDRx = c;
#endif //DEBUG_DUMP_TO_2ND_SERIAL
}
}
}

8
Firmware/Marlin_main.cpp
View File

@ -1112,8 +1112,12 @@ void setup()
check_babystep(); //checking if Z babystep is in allowed range
setup_uvlo_interrupt();
#ifndef DEBUG_DISABLE_FANCHECK
setup_fan_interrupt();
#endif //DEBUG_DISABLE_FANCHECK
#ifndef DEBUG_DISABLE_FSENSORCHECK
fsensor_setup_interrupt();
#endif //DEBUG_DISABLE_FSENSORCHECK
for (int i = 0; i<4; i++) EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
#ifndef DEBUG_DISABLE_STARTMSGS
@ -1219,6 +1223,10 @@ void fsensor_init() {
puts_P(PSTR("DISABLED\n"));
fsensor_disable();
}
#ifdef DEBUG_DISABLE_FSENSORCHECK
filament_autoload_enabled = false;
fsensor_disable();
#endif //DEBUG_DISABLE_FSENSORCHECK
}
#endif //PAT9125

2
Firmware/temperature.cpp
View File

@ -697,6 +697,7 @@ void manage_heater()
#endif
} // End extruder for loop
#ifndef DEBUG_DISABLE_FANCHECK
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1)
@ -708,6 +709,7 @@ void manage_heater()
extruder_autofan_last_check = millis();
}
#endif
#endif //DEBUG_DISABLE_FANCHECK
#ifndef PIDTEMPBED
if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL)

5
Firmware/ultralcd.cpp
View File

@ -3783,7 +3783,7 @@ static void lcd_settings_menu()
{
MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
}
#ifndef DEBUG_DISABLE_FSENSORCHECK
if (FSensorStateMenu == 0) {
if (fsensor_not_responding){
// Filament sensor not working
@ -3807,6 +3807,7 @@ static void lcd_settings_menu()
}
}
#endif //DEBUG_DISABLE_FSENSORCHECK
if (fans_check_enabled == true) {
MENU_ITEM(function, MSG_FANS_CHECK_ON, lcd_set_fan_check);
@ -5150,11 +5151,13 @@ static void lcd_tune_menu()
MENU_ITEM(function, MSG_FILAMENTCHANGE, lcd_colorprint_change);//7
#endif
#ifndef DEBUG_DISABLE_FSENSORCHECK
if (FSensorStateMenu == 0) {
MENU_ITEM(function, MSG_FSENSOR_OFF, lcd_fsensor_state_set);
} else {
MENU_ITEM(function, MSG_FSENSOR_ON, lcd_fsensor_state_set);
}
#endif //DEBUG_DISABLE_FSENSORCHECK
if (SilentModeMenu == 0) MENU_ITEM(function, MSG_SILENT_MODE_OFF, lcd_silent_mode_set);
else MENU_ITEM(function, MSG_SILENT_MODE_ON, lcd_silent_mode_set);