3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Document.

Browse source
This commit is contained in:
Marek Bel 2019-05-30 23:29:33 +02:00
parent e79c203c96
commit 00da4640e2
3 changed files with 22 additions and 0 deletions

7
Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
View file

@ -505,6 +505,13 @@
#define MMU_DEBUG //print communication between MMU2 and printer on serial
//#define MMU_HAS_CUTTER
// This is experimental feature requested by our test department.
// There is no known use for ordinary user. If enabled by this macro
// and enabled from printer menu (not enabled by default). It cuts filament
// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
// defined.
//#define MMU_ALWAYS_CUT
#define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
#endif //__CONFIGURATION_PRUSA_H

7
Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
View file

@ -506,6 +506,13 @@
#define MMU_DEBUG //print communication between MMU2 and printer on serial
//#define MMU_HAS_CUTTER
// This is experimental feature requested by our test department.
// There is no known use for ordinary user. If enabled by this macro
// and enabled from printer menu (not enabled by default). It cuts filament
// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
// defined.
//#define MMU_ALWAYS_CUT
#define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
#endif //__CONFIGURATION_PRUSA_H

8
Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
View file

@ -627,6 +627,14 @@
#define MMU_HWRESET
#define MMU_DEBUG //print communication between MMU2 and printer on serial
//#define MMU_HAS_CUTTER
// This is experimental feature requested by our test department.
// There is no known use for ordinary user. If enabled by this macro
// and enabled from printer menu (not enabled by default). It cuts filament
// every time when switching filament from gcode. MMU_HAS_CUTTER needs to be
// defined.
//#define MMU_ALWAYS_CUT
#define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
#endif //__CONFIGURATION_PRUSA_H