3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

IR sensor gen. II

Browse Source 
disconnected PCB detection
This commit is contained in:
MRprusa3d 2019-09-16 00:43:37 +02:00
parent be598687d0
commit 011468598e
10 changed files with 330 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Firmware/adc.c
View File

@ -4,6 +4,7 @@
#include <stdio.h>
#include <avr/io.h>
#include <avr/pgmspace.h>
#include "pins.h"
uint8_t adc_state;
uint8_t adc_count;
@ -24,8 +25,8 @@ void adc_init(void)
ADMUX |= (1 << REFS0);
ADCSRA |= (1 << ADEN);
// ADCSRA |= (1 << ADIF) | (1 << ADSC);
DIDR0 = (ADC_CHAN_MSK & 0xff);
DIDR2 = (ADC_CHAN_MSK >> 8);
DIDR0 = ((ADC_CHAN_MSK & ADC_DIDR_MSK) & 0xff);
DIDR2 = ((ADC_CHAN_MSK & ADC_DIDR_MSK) >> 8);
adc_reset();
// adc_sim_mask = 0b0101;
// adc_sim_mask = 0b100101;

17
Firmware/config.h
View File

@ -2,9 +2,21 @@
#define _CONFIG_H
#include "Configuration_prusa.h"
#include "pins.h"
#define IR_SENSOR_ANALOG (defined(VOLT_IR_PIN) && defined(IR_SENSOR))
//ADC configuration
#if !IR_SENSOR_ANALOG
#define ADC_CHAN_MSK 0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
#define ADC_CHAN_CNT 7 //number of used channels)
#else //!IR_SENSOR_ANALOG
#define ADC_CHAN_MSK 0b0000001101011111 //used AD channels bit mask (0,1,2,3,4,6,8,9)
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
#define ADC_CHAN_CNT 8 //number of used channels)
#endif //!IR_SENSOR_ANALOG
#define ADC_OVRSAMPL 16 //oversampling multiplier
#define ADC_CALLBACK adc_ready //callback function ()
@ -42,11 +54,8 @@
#define W25X20CL_SPCR SPI_SPCR(W25X20CL_SPI_RATE, 1, 1, 1, 0)
#define W25X20CL_SPSR SPI_SPSR(W25X20CL_SPI_RATE)
#include "boards.h"
#include "Configuration_prusa.h"
//LANG - Multi-language support
//#define LANG_MODE 0 // primary language only
//define LANG_MODE 0 // primary language only
#define LANG_MODE 1 // sec. language support
#define LANG_SIZE_RESERVED 0x2800 // reserved space for secondary language (10240 bytes)

3
Firmware/eeprom.h
View File

@ -203,6 +203,9 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
#define EEPROM_SHEETS_BASE (EEPROM_CHECK_GCODE - EEPROM_SHEETS_SIZEOF) // Sheets
static Sheets * const EEPROM_Sheets_base = (Sheets*)(EEPROM_SHEETS_BASE);
#define EEPROM_FSENSOR_PCB (EEPROM_SHEETS_BASE-1) // uint8
#define EEPROM_FSENSOR_ACTION_NA (EEPROM_FSENSOR_PCB-1) // uint8
//This is supposed to point to last item to allow EEPROM overrun check. Please update when adding new items.
#define EEPROM_LAST_ITEM EEPROM_SHEETS_BASE

136
Firmware/fsensor.cpp
View File

@ -15,6 +15,10 @@
#include "mmu.h"
#include "cardreader.h"
#include "adc.h"
#include "temperature.h"
#include "config.h"
//! @name Basic parameters
//! @{
#define FSENSOR_CHUNK_LEN 0.64F //!< filament sensor chunk length 0.64mm
@ -117,6 +121,13 @@ int16_t fsensor_oq_yd_max;
uint16_t fsensor_oq_sh_sum;
//! @}
#if IR_SENSOR_ANALOG
ClFsensorPCB oFsensorPCB;
ClFsensorActionNA oFsensorActionNA;
bool bIRsensorStateFlag=false;
unsigned long nIRsensorLastTime;
#endif //IR_SENSOR_ANALOG
void fsensor_stop_and_save_print(void)
{
printf_P(PSTR("fsensor_stop_and_save_print\n"));
@ -136,10 +147,11 @@ void fsensor_init(void)
{
#ifdef PAT9125
uint8_t pat9125 = pat9125_init();
printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
#endif //PAT9125
uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
fsensor_not_responding = false;
#ifdef PAT9125
uint8_t oq_meassure_enabled = eeprom_read_byte((uint8_t*)EEPROM_FSENS_OQ_MEASS_ENABLED);
fsensor_oq_meassure_enabled = (oq_meassure_enabled == 1)?true:false;
@ -150,19 +162,27 @@ void fsensor_init(void)
fsensor = 0; //disable sensor
fsensor_not_responding = true;
}
else
fsensor_not_responding = false;
#endif //PAT9125
#if IR_SENSOR_ANALOG
bIRsensorStateFlag=false;
oFsensorPCB=(ClFsensorPCB)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_PCB);
oFsensorActionNA=(ClFsensorActionNA)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA);
#endif //IR_SENSOR_ANALOG
if (fsensor)
fsensor_enable();
fsensor_enable(false); // (in this case) EEPROM update is not necessary
else
fsensor_disable();
printf_P(PSTR("FSensor %S\n"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED\n")));
fsensor_disable(false); // (in this case) EEPROM update is not necessary
printf_P(PSTR("FSensor %S"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED")));
#if IR_SENSOR_ANALOG
printf_P(PSTR(" (sensor board revision: %S)\n"),(oFsensorPCB==ClFsensorPCB::_Rev03b)?PSTR("03b or newer"):PSTR("03 or older"));
#else //IR_SENSOR_ANALOG
printf_P(PSTR("\n"));
#endif //IR_SENSOR_ANALOG
if (check_for_ir_sensor()) ir_sensor_detected = true;
}
bool fsensor_enable(void)
bool fsensor_enable(bool bUpdateEEPROM)
{
#ifdef PAT9125
if (mmu_enabled == false) { //filament sensor is pat9125, enable only if it is working
@ -187,18 +207,34 @@ bool fsensor_enable(void)
FSensorStateMenu = 1;
}
#else // PAT9125
fsensor_enabled = true;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x01);
FSensorStateMenu = 1;
#endif // PAT9125
#if IR_SENSOR_ANALOG
if(!fsensor_IR_check())
{
bUpdateEEPROM=true;
fsensor_enabled=false;
fsensor_not_responding=true;
FSensorStateMenu=0;
}
else {
#endif //IR_SENSOR_ANALOG
fsensor_enabled=true;
fsensor_not_responding=false;
FSensorStateMenu=1;
#if IR_SENSOR_ANALOG
}
#endif //IR_SENSOR_ANALOG
if(bUpdateEEPROM)
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, FSensorStateMenu);
#endif //PAT9125
return fsensor_enabled;
}
void fsensor_disable(void)
void fsensor_disable(bool bUpdateEEPROM)
{
fsensor_enabled = false;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00);
FSensorStateMenu = 0;
if(bUpdateEEPROM)
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00);
}
void fsensor_autoload_set(bool State)
@ -589,10 +625,76 @@ void fsensor_update(void)
fsensor_oq_meassure_enabled = oq_meassure_enabled_tmp;
}
#else //PAT9125
if ((digitalRead(IR_SENSOR_PIN) == 1) && CHECK_FSENSOR && fsensor_enabled && ir_sensor_detected && ( ! fsensor_m600_enqueued) )
{
fsensor_stop_and_save_print();
fsensor_enque_M600();
if (CHECK_FSENSOR && fsensor_enabled && ir_sensor_detected && ( ! fsensor_m600_enqueued) )
{
if(digitalRead(IR_SENSOR_PIN))
{ // IR_SENSOR_PIN ~ H
#if IR_SENSOR_ANALOG
if(!bIRsensorStateFlag)
{
bIRsensorStateFlag=true;
nIRsensorLastTime=_millis();
}
else
{
if((_millis()-nIRsensorLastTime)>IR_SENSOR_STEADY)
{
uint8_t nMUX1,nMUX2;
uint16_t nADC;
bIRsensorStateFlag=false;
// sequence for direct data reading from AD converter
DISABLE_TEMPERATURE_INTERRUPT();
nMUX1=ADMUX; // ADMUX saving
nMUX2=ADCSRB;
adc_setmux(VOLT_IR_PIN);
ADCSRA|=(1<<ADSC); // first conversion after ADMUX change discarded (preventively)
while(ADCSRA&(1<<ADSC))
;
ADCSRA|=(1<<ADSC); // second conversion used
while(ADCSRA&(1<<ADSC))
;
nADC=ADC;
ADMUX=nMUX1; // ADMUX restoring
ADCSRB=nMUX2;
ENABLE_TEMPERATURE_INTERRUPT();
// end of sequence for ...
if((oFsensorPCB==ClFsensorPCB::_Rev03b)&&((nADC*OVERSAMPLENR)>((int)IRsensor_Hopen_TRESHOLD)))
{
fsensor_disable();
fsensor_not_responding = true;
printf_P(PSTR("IR sensor not responding (%d)!\n"),1);
if((ClFsensorActionNA)eeprom_read_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA)==ClFsensorActionNA::_Pause)
if(oFsensorActionNA==ClFsensorActionNA::_Pause)
lcd_pause_print();
}
else
{
#endif //IR_SENSOR_ANALOG
fsensor_stop_and_save_print();
fsensor_enque_M600();
#if IR_SENSOR_ANALOG
}
}
}
}
else
{ // IR_SENSOR_PIN ~ L
bIRsensorStateFlag=false;
#endif //IR_SENSOR_ANALOG
}
}
#endif //PAT9125
}
#if IR_SENSOR_ANALOG
bool fsensor_IR_check()
{
uint16_t volt_IR_int;
bool bCheckResult;
volt_IR_int=current_voltage_raw_IR;
bCheckResult=(volt_IR_int<((int)IRsensor_Lmax_TRESHOLD))||(volt_IR_int>((int)IRsensor_Hmin_TRESHOLD));
bCheckResult=bCheckResult&&(!((oFsensorPCB==ClFsensorPCB::_Rev03b)&&(volt_IR_int>((int)IRsensor_Hopen_TRESHOLD))));
return(bCheckResult);
}
#endif //IR_SENSOR_ANALOG

29
Firmware/fsensor.h
View File

@ -3,6 +3,7 @@
#define FSENSOR_H
#include <inttypes.h>
#include "config.h"
//! minimum meassured chunk length in steps
@ -27,8 +28,8 @@ extern void fsensor_init(void);
//! @name enable/disable
//! @{
extern bool fsensor_enable(void);
extern void fsensor_disable(void);
extern bool fsensor_enable(bool bUpdateEEPROM=true);
extern void fsensor_disable(bool bUpdateEEPROM=true);
//! @}
//autoload feature enabled
@ -65,4 +66,28 @@ extern void fsensor_st_block_begin(block_t* bl);
extern void fsensor_st_block_chunk(block_t* bl, int cnt);
//! @}
#if IR_SENSOR_ANALOG
#define IR_SENSOR_STEADY 10 // [ms]
enum class ClFsensorPCB:uint_least8_t
{
_Old=0,
_Rev03b=1,
_Undef=EEPROM_EMPTY_VALUE
};
enum class ClFsensorActionNA:uint_least8_t
{
_Continue=0,
_Pause=1,
_Undef=EEPROM_EMPTY_VALUE
};
extern ClFsensorPCB oFsensorPCB;
extern ClFsensorActionNA oFsensorActionNA;
extern bool fsensor_IR_check();
#endif //IR_SENSOR_ANALOG
#endif //FSENSOR_H

3
Firmware/pins_Einsy_1_0.h
View File

@ -71,12 +71,13 @@
#define HEATER_2_PIN -1
#define TEMP_2_PIN -1
#define TEMP_AMBIENT_PIN 5 //A5
#define TEMP_AMBIENT_PIN 6 //A6
#define TEMP_PINDA_PIN 3 //A3
#define VOLT_PWR_PIN 4 //A4
#define VOLT_BED_PIN 9 //A9
#define VOLT_IR_PIN 8 //A8
#define E0_TMC2130_CS 66

11
Firmware/temperature.cpp
View File

@ -44,6 +44,8 @@
#include "Timer.h"
#include "Configuration_prusa.h"
#include "config.h"
//===========================================================================
//=============================public variables============================
//===========================================================================
@ -71,6 +73,10 @@ int current_voltage_raw_pwr = 0;
int current_voltage_raw_bed = 0;
#endif
#if IR_SENSOR_ANALOG
int current_voltage_raw_IR = 0;
#endif //IR_SENSOR_ANALOG
int current_temperature_bed_raw = 0;
float current_temperature_bed = 0.0;
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
@ -1635,11 +1641,14 @@ void adc_ready(void) //callback from adc when sampling finished
current_voltage_raw_pwr = adc_values[ADC_PIN_IDX(VOLT_PWR_PIN)];
#endif
#ifdef AMBIENT_THERMISTOR
current_temperature_raw_ambient = adc_values[ADC_PIN_IDX(TEMP_AMBIENT_PIN)];
current_temperature_raw_ambient = adc_values[ADC_PIN_IDX(TEMP_AMBIENT_PIN)]; // 5->6
#endif //AMBIENT_THERMISTOR
#ifdef VOLT_BED_PIN
current_voltage_raw_bed = adc_values[ADC_PIN_IDX(VOLT_BED_PIN)]; // 6->9
#endif
#if IR_SENSOR_ANALOG
current_voltage_raw_IR = adc_values[ADC_PIN_IDX(VOLT_IR_PIN)];
#endif //IR_SENSOR_ANALOG
temp_meas_ready = true;
}

6
Firmware/temperature.h
View File

@ -27,6 +27,8 @@
#include "stepper.h"
#endif
#include "config.h"
#ifdef SYSTEM_TIMER_2
@ -74,6 +76,10 @@ extern int current_voltage_raw_pwr;
extern int current_voltage_raw_bed;
#endif
#if IR_SENSOR_ANALOG
extern int current_voltage_raw_IR;
#endif //IR_SENSOR_ANALOG
#ifdef TEMP_SENSOR_1_AS_REDUNDANT
extern float redundant_temperature;
#endif

152
Firmware/ultralcd.cpp
View File

@ -42,6 +42,10 @@
#include "io_atmega2560.h"
#include "first_lay_cal.h"
#include "fsensor.h"
#include "adc.h"
#include "config.h"
int scrollstuff = 0;
char longFilenameOLD[LONG_FILENAME_LENGTH];
@ -61,9 +65,6 @@ int8_t FSensorStateMenu = 1;
int8_t CrashDetectMenu = 1;
extern bool fsensor_enable();
extern void fsensor_disable();
#ifdef TMC2130
extern void crashdet_enable();
extern void crashdet_disable();
@ -200,6 +201,7 @@ enum class TestError : uint_least8_t
SwappedFan,
WiringFsensor,
TriggeringFsensor,
FsensorLevel
};
static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay);
@ -231,6 +233,9 @@ static FanCheck lcd_selftest_fan_auto(int _fan);
static bool lcd_selftest_fsensor();
#endif //PAT9125
static bool selftest_irsensor();
#if IR_SENSOR_ANALOG
static bool lcd_selftest_IRsensor();
#endif //IR_SENSOR_ANALOG
static void lcd_selftest_error(TestError error, const char *_error_1, const char *_error_2);
static void lcd_colorprint_change();
#ifdef SNMM
@ -1984,21 +1989,28 @@ static void lcd_menu_temperatures()
menu_back_if_clicked();
}
#if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN)
#if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || IR_SENSOR_ANALOG
#define VOLT_DIV_R1 10000
#define VOLT_DIV_R2 2370
#define VOLT_DIV_FAC ((float)VOLT_DIV_R2 / (VOLT_DIV_R2 + VOLT_DIV_R1))
#define VOLT_DIV_REF 5
static void lcd_menu_voltages()
{
lcd_timeoutToStatus.stop(); //infinite timeout
float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
lcd_home();
lcd_printf_P(PSTR(" PWR: %d.%01dV\n" " BED: %d.%01dV"), (int)volt_pwr, (int)(10*fabs(volt_pwr - (int)volt_pwr)), (int)volt_bed, (int)(10*fabs(volt_bed - (int)volt_bed)));
menu_back_if_clicked();
#if !IR_SENSOR_ANALOG
lcd_printf_P(PSTR("\n"));
#endif //!IR_SENSOR_ANALOG
lcd_printf_P(PSTR(" PWR: %4.1fV\n" " BED: %4.1fV"), volt_pwr, volt_bed);
#if IR_SENSOR_ANALOG
float volt_IR = VOLT_DIV_REF * ((float)current_voltage_raw_IR / (1023 * OVERSAMPLENR));
lcd_printf_P(PSTR("\n IR : %3.1fV"),volt_IR);
#endif //IR_SENSOR_ANALOG
menu_back_if_clicked();
}
#endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN
#endif //defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || IR_SENSOR_ANALOG
#ifdef TMC2130
static void lcd_menu_belt_status()
@ -5505,6 +5517,41 @@ SETTINGS_VERSION;
MENU_END();
}
#if IR_SENSOR_ANALOG
static void lcd_fsensor_actionNA_set(void)
{
switch(oFsensorActionNA)
{
case ClFsensorActionNA::_Continue:
oFsensorActionNA=ClFsensorActionNA::_Pause;
break;
case ClFsensorActionNA::_Pause:
oFsensorActionNA=ClFsensorActionNA::_Continue;
break;
default:
oFsensorActionNA=ClFsensorActionNA::_Continue;
}
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA,(uint8_t)oFsensorActionNA);
}
#define FSENSOR_ACTION_NA \
do\
{\
switch(oFsensorActionNA)\
{\
case ClFsensorActionNA::_Continue:\
MENU_ITEM_FUNCTION_P(_i("FS Action [cont.]"),lcd_fsensor_actionNA_set);\
break;\
case ClFsensorActionNA::_Pause:\
MENU_ITEM_FUNCTION_P(_i("FS Action [pause]"),lcd_fsensor_actionNA_set);\
break;\
default:\
oFsensorActionNA=ClFsensorActionNA::_Continue;\
}\
}\
while (0)
#endif //IR_SENSOR_ANALOG
void lcd_hw_setup_menu(void) // can not be "static"
{
MENU_BEGIN();
@ -5536,6 +5583,11 @@ if(!farm_mode){
SETTINGS_NOZZLE;
MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu);
}
#if IR_SENSOR_ANALOG
FSENSOR_ACTION_NA;
#endif //IR_SENSOR_ANALOG
MENU_END();
}
@ -6850,11 +6902,21 @@ static void lcd_tune_menu()
#ifdef FILAMENT_SENSOR
if (FSensorStateMenu == 0) {
MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);
if (fsensor_not_responding && (mmu_enabled == false)) {
/* Filament sensor not working*/
MENU_ITEM_FUNCTION_P(_i("Fil. sensor [N/A]"), lcd_fsensor_state_set);
}
else {
/* Filament sensor turned off, working, no problems*/
MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);
}
}
else {
MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_ON), lcd_fsensor_state_set);
}
#if IR_SENSOR_ANALOG
FSENSOR_ACTION_NA;
#endif //IR_SENSOR_ANALOG
#endif //FILAMENT_SENSOR
SETTINGS_AUTO_DEPLETE;
@ -7137,6 +7199,42 @@ void lcd_sdcard_menu()
MENU_END();
}
#if IR_SENSOR_ANALOG
static bool lcd_selftest_IRsensor()
{
bool bAction;
bool bPCBrev03b;
uint16_t volt_IR_int;
float volt_IR;
volt_IR_int=current_voltage_raw_IR;
bPCBrev03b=(volt_IR_int<((int)IRsensor_Hopen_TRESHOLD));
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"),volt_IR);
if(volt_IR_int<((int)IRsensor_Hmin_TRESHOLD))
{
lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
return(false);
}
lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament (but not load them!) into extruder and then press the knob."));
volt_IR_int=current_voltage_raw_IR;
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"),volt_IR);
if(volt_IR_int>((int)IRsensor_Lmax_TRESHOLD))
{
lcd_selftest_error(TestError::FsensorLevel,"LOW","");
return(false);
}
if((bPCBrev03b?1:0)!=(uint8_t)oFsensorPCB) // safer then "(uint8_t)bPCBrev03b"
{
printf_P(PSTR("Filament sensor board change detected: revision %S\n"),bPCBrev03b?PSTR("03b or newer"):PSTR("03 or older"));
oFsensorPCB=bPCBrev03b?ClFsensorPCB::_Rev03b:ClFsensorPCB::_Old;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
}
return(true);
}
#endif //IR_SENSOR_ANALOG
static void lcd_selftest_v()
{
(void)lcd_selftest();
@ -7153,8 +7251,16 @@ bool lcd_selftest()
#ifdef TMC2130
FORCE_HIGH_POWER_START;
#endif // TMC2130
_delay(2000);
#if !IR_SENSOR_ANALOG
_delay(2000);
#endif //!IR_SENSOR_ANALOG
KEEPALIVE_STATE(IN_HANDLER);
#if IR_SENSOR_ANALOG
bool bAction;
bAction=lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament unloaded?"),false,true);
if(!bAction)
return(false);
#endif //IR_SENSOR_ANALOG
_progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000);
#if (defined(FANCHECK) && defined(TACH_0))
@ -7340,12 +7446,20 @@ bool lcd_selftest()
{
#ifdef PAT9125
_progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor
_result = lcd_selftest_fsensor();
_result = lcd_selftest_fsensor();
if (_result)
{
_progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK
}
#endif //PAT9125
#if IR_SENSOR_ANALOG
_progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filament sensor
_result = lcd_selftest_IRsensor();
if (_result)
{
_progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //filament sensor OK
}
#endif //IR_SENSOR_ANALOG
}
}
#endif //FILAMENT_SENSOR
@ -7881,11 +7995,17 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
break;
case TestError::TriggeringFsensor:
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("False triggering"));////c=20
break;
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("False triggering"));////c=20
break;
case TestError::FsensorLevel:
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
lcd_set_cursor(0, 3);
lcd_printf_P(_i("%s level expected"),_error_1);////c=20
break;
}
_delay(1000);

10
Firmware/ultralcd.h
View File

@ -7,6 +7,8 @@
#include "menu.h"
#include "mesh_bed_calibration.h"
#include "config.h"
extern void menu_lcd_longpress_func(void);
extern void menu_lcd_charsetup_func(void);
extern void menu_lcd_lcdupdate_func(void);
@ -234,4 +236,12 @@ enum class WizState : uint8_t
void lcd_wizard(WizState state);
#define VOLT_DIV_REF 5
#if IR_SENSOR_ANALOG
#define IRsensor_Hmin_TRESHOLD (3.0*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~3.0V (0.6*Vcc)
#define IRsensor_Lmax_TRESHOLD (1.5*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~1.5V (0.3*Vcc)
#define IRsensor_Hopen_TRESHOLD (4.6*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~4.6V (N.C. @ Ru~20-50k, Rd'=56k, Ru'=10k)
#define IRsensor_Ldiode_TRESHOLD (0.3*1023*OVERSAMPLENR/VOLT_DIV_REF) // ~0.3V
#endif //IR_SENSOR_ANALOG
#endif //ULTRALCD_H