3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'MK3' into Use_Timer

Browse source
This commit is contained in:
Marek Bel 2018-06-05 19:03:11 +02:00
commit 01af8a806b
98 changed files with 15578 additions and 16105 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Firmware/Configuration.h
View file

@ -7,8 +7,8 @@
#define STR(x) STR_HELPER(x)
// Firmware version
#define FW_VERSION "3.2.0"
#define FW_COMMIT_NR 555
#define FW_VERSION "3.2.1"
#define FW_COMMIT_NR 576
// FW_VERSION_UNKNOWN means this is an unofficial build.
// The firmware should only be checked into github with this symbol.
#define FW_DEV_VERSION FW_VERSION_UNKNOWN

14960
Firmware/Firmware.ino.rambo.hex
View file

File diff suppressed because it is too large Load diff

5
Firmware/Marlin.h
View file

@ -343,11 +343,13 @@ extern unsigned long t_fan_rising_edge;
extern bool mesh_bed_leveling_flag;
extern bool mesh_bed_run_from_menu;
extern float distance_from_min[2];
extern bool sortAlpha;
extern char dir_names[3][9];
// save/restore printing
extern bool saved_printing;
extern void calculate_extruder_multipliers();
// Similar to the default Arduino delay function,
@ -435,6 +437,7 @@ void force_high_power_mode(bool start_high_power_section);
#endif //TMC2130
// G-codes
void gcode_G28(bool home_x, bool home_y, bool home_z, bool calib);
bool gcode_M45(bool onlyZ, int8_t verbosity_level);
void gcode_M114();
void gcode_M701();

4
Firmware/MarlinSerial.h
View file

@ -131,7 +131,7 @@ class MarlinSerial //: public Stream
if (M_UCSRxA & (1<<M_FEx)) {
// Characters received with the framing errors will be ignored.
// The temporary variable "c" was made volatile, so the compiler does not optimize this out.
volatile unsigned char c = M_UDRx;
(void)(*(char *)M_UDRx);
} else {
unsigned char c = M_UDRx;
int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;
@ -155,7 +155,7 @@ class MarlinSerial //: public Stream
if (UCSR1A & (1<<FE1)) {
// Characters received with the framing errors will be ignored.
// The temporary variable "c" was made volatile, so the compiler does not optimize this out.
volatile unsigned char c = UDR1;
(void)(*(char *)UDR1);
} else {
unsigned char c = UDR1;
int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;

965
Firmware/Marlin_main.cpp
View file

File diff suppressed because it is too large Load diff

32
Firmware/bootapp.c Normal file
View file

@ -0,0 +1,32 @@
//bootapp.c
#include "bootapp.h"
#include <avr/pgmspace.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
/*
void bootapp_print_vars()
{
printf_P(_n("boot_src_addr =0x%08lx\n"), boot_src_addr);
printf_P(_n("boot_dst_addr =0x%08lx\n"), boot_dst_addr);
printf_P(_n("boot_copy_size =0x%04x\n"), boot_copy_size);
printf_P(_n("boot_reserved =0x%02x\n"), boot_reserved);
printf_P(_n("boot_app_flags =0x%02x\n"), boot_app_flags);
printf_P(_n("boot_app_magic =0x%08lx\n"), boot_app_magic);
}
*/
void bootapp_ram2flash(uint16_t rptr, uint16_t fptr, uint16_t size)
{
cli();
// uint16_t ui; for (ui = 0; ui < size; ui++)
// ram_array[ui+rptr] = 0xff;
boot_app_magic = 0x55aa55aa;
boot_app_flags = BOOT_APP_FLG_ERASE | BOOT_APP_FLG_COPY;
boot_copy_size = (uint16_t)size;
boot_src_addr = (uint32_t)rptr;
boot_dst_addr = (uint32_t)fptr;
wdt_enable(WDTO_15MS);
while(1);
}

36
Firmware/bootapp.h Normal file
View file

@ -0,0 +1,36 @@
//language.h
#ifndef BOOTAPP_H
#define BOOTAPP_H
#include "config.h"
#include <inttypes.h>
#define RAMSIZE 0x2000
#define ram_array ((uint8_t*)(0))
#define boot_src_addr (*((uint32_t*)(RAMSIZE - 16)))
#define boot_dst_addr (*((uint32_t*)(RAMSIZE - 12)))
#define boot_copy_size (*((uint16_t*)(RAMSIZE - 8)))
#define boot_reserved (*((uint8_t*)(RAMSIZE - 6)))
#define boot_app_flags (*((uint8_t*)(RAMSIZE - 5)))
#define boot_app_magic (*((uint32_t*)(RAMSIZE - 4)))
#define BOOT_APP_FLG_ERASE 0x01
#define BOOT_APP_FLG_COPY 0x02
#define BOOT_APP_FLG_FLASH 0x04
#define BOOT_APP_FLG_USER0 0x80
#if defined(__cplusplus)
extern "C" {
#endif //defined(__cplusplus)
extern void bootapp_ram2flash(uint16_t rptr, uint16_t fptr, uint16_t size);
#if defined(__cplusplus)
}
#endif //defined(__cplusplus)
#endif //BOOTAPP_H

45
Firmware/cardreader.cpp
View file

@ -94,7 +94,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
if (!dir.open(parent, lfilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
//SERIAL_ECHO_START();
//SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
//SERIAL_ECHOPGM(_i("Cannot open subdir"));////MSG_SD_CANT_OPEN_SUBDIR c=0 r=0
//SERIAL_ECHOLN(lfilename);
}
}
@ -183,23 +183,23 @@ void CardReader::initsd()
{
//if (!card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(MSG_SD_INIT_FAIL);
SERIAL_ECHOLNRPGM(_i("SD init fail"));////MSG_SD_INIT_FAIL c=0 r=0
}
else if (!volume.init(&card))
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_VOL_INIT_FAIL);
SERIAL_ERRORLNRPGM(_i("volume.init failed"));////MSG_SD_VOL_INIT_FAIL c=0 r=0
}
else if (!root.openRoot(&volume))
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_OPENROOT_FAIL);
SERIAL_ERRORLNRPGM(_i("openRoot failed"));////MSG_SD_OPENROOT_FAIL c=0 r=0
}
else
{
cardOK = true;
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(MSG_SD_CARD_OK);
SERIAL_ECHOLNRPGM(_i("SD card ok"));////MSG_SD_CARD_OK c=0 r=0
}
workDir=root;
curDir=&root;
@ -211,7 +211,7 @@ void CardReader::initsd()
/*
if(!workDir.openRoot(&volume))
{
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
SERIAL_ECHOLNPGM(_T(MSG_SD_WORKDIR_FAIL));
}
*/
@ -221,7 +221,7 @@ void CardReader::setroot()
{
/*if(!workDir.openRoot(&volume))
{
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
SERIAL_ECHOLNPGM(_T(MSG_SD_WORKDIR_FAIL));
}*/
workDir=root;
@ -360,7 +360,7 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
SERIAL_ECHOLN(subdirname);
if(!myDir.open(curDir,subdirname,O_READ))
{
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM(".");
return;
@ -392,20 +392,20 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
if (file.open(curDir, fname, O_READ))
{
filesize = file.fileSize();
SERIAL_PROTOCOLRPGM(MSG_SD_FILE_OPENED);
SERIAL_PROTOCOLRPGM(_i("File opened: "));////MSG_SD_FILE_OPENED c=0 r=0
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLRPGM(MSG_SD_SIZE);
SERIAL_PROTOCOLRPGM(_n(" Size: "));////MSG_SD_SIZE c=0 r=0
SERIAL_PROTOCOLLN(filesize);
sdpos = 0;
SERIAL_PROTOCOLLNRPGM(MSG_SD_FILE_SELECTED);
SERIAL_PROTOCOLLNRPGM(_i("File selected"));////MSG_SD_FILE_SELECTED c=0 r=0
getfilename(0, fname);
lcd_setstatus(longFilename[0] ? longFilename : fname);
lcd_setstatus("SD-PRINTING ");
}
else
{
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
@ -414,14 +414,14 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
{ //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
{
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
else
{
saving = true;
SERIAL_PROTOCOLRPGM(MSG_SD_WRITE_TO_FILE);
SERIAL_PROTOCOLRPGM(_i("Writing to file: "));////MSG_SD_WRITE_TO_FILE c=0 r=0
SERIAL_PROTOCOLLN(name);
lcd_setstatus(fname);
}
@ -513,7 +513,7 @@ void CardReader::getStatus()
if(sdprinting){
SERIAL_PROTOCOL(longFilename);
SERIAL_PROTOCOLPGM("\n");
SERIAL_PROTOCOLRPGM(MSG_SD_PRINTING_BYTE);
SERIAL_PROTOCOLRPGM(_i("SD printing byte "));////MSG_SD_PRINTING_BYTE c=0 r=0
SERIAL_PROTOCOL(sdpos);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOLLN(filesize);
@ -523,7 +523,10 @@ void CardReader::getStatus()
SERIAL_PROTOCOL(itostr2(time%60));
SERIAL_PROTOCOLPGM("\n");
}
else{
else if (saved_printing) {
SERIAL_PROTOCOLLNPGM("Print saved");
}
else {
SERIAL_PROTOCOLLNPGM("Not SD printing");
}
}
@ -546,7 +549,7 @@ void CardReader::write_command(char *buf)
if (file.writeError)
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE);
SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE));
}
}
@ -558,7 +561,7 @@ void CardReader::write_command_no_newline(char *buf)
if (file.writeError)
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE);
SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE));
MYSERIAL.println("An error while writing to the SD Card.");
}
}
@ -673,7 +676,7 @@ void CardReader::chdir(const char * relpath)
if(!newfile.open(*parent,relpath, O_READ))
{
SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_SD_CANT_ENTER_SUBDIR);
SERIAL_ECHORPGM(_i("Cannot enter subdir: "));////MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
SERIAL_ECHOLN(relpath);
}
else
@ -748,14 +751,14 @@ void CardReader::presort() {
// Never sort more than the max allowed
// If you use folders to organize, 20 may be enough
if (fileCnt > SDSORT_LIMIT) {
lcd_show_fullscreen_message_and_wait_P(MSG_FILE_CNT);
lcd_show_fullscreen_message_and_wait_P(_i("Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."));////MSG_FILE_CNT c=20 r=4
fileCnt = SDSORT_LIMIT;
}
lcd_implementation_clear();
#if !SDSORT_USES_RAM
lcd_set_progress();
#endif
lcd_print_at_PGM(0, 1, MSG_SORTING);
lcd_print_at_PGM(0, 1, _i("Sorting files"));////MSG_SORTING c=20 r=1
// Sort order is always needed. May be static or dynamic.
#if SDSORT_DYNAMIC_RAM

2
Firmware/cardreader.h
View file

@ -133,7 +133,7 @@ private:
#ifdef DEBUG_SD_SPEED_TEST
public:
#endif DEBUG_SD_SPEED_TEST
#endif //DEBUG_SD_SPEED_TEST
Sd2Card card;
private:

18
Firmware/cmdqueue.cpp
View file

@ -286,7 +286,7 @@ void enquecommand(const char *cmd, bool from_progmem)
else
strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd);
SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_Enqueing);
SERIAL_ECHORPGM(_T(MSG_Enqueing));
SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE);
SERIAL_ECHOLNPGM("\"");
bufindw += len + (CMDHDRSIZE + 1);
@ -298,7 +298,7 @@ void enquecommand(const char *cmd, bool from_progmem)
#endif /* CMDBUFFER_DEBUG */
} else {
SERIAL_ERROR_START;
SERIAL_ECHORPGM(MSG_Enqueing);
SERIAL_ECHORPGM(_T(MSG_Enqueing));
if (from_progmem)
SERIAL_PROTOCOLRPGM(cmd);
else
@ -425,7 +425,7 @@ void get_command()
// M110 - set current line number.
// Line numbers not sent in succession.
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(MSG_ERR_LINE_NO);
SERIAL_ERRORRPGM(_n("Line Number is not Last Line Number+1, Last Line: "));////MSG_ERR_LINE_NO c=0 r=0
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
@ -441,7 +441,7 @@ void get_command()
checksum = checksum^(*p++);
if (int(strtol(strchr_pointer+1, NULL, 10)) != int(checksum)) {
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(MSG_ERR_CHECKSUM_MISMATCH);
SERIAL_ERRORRPGM(_i("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
@ -453,7 +453,7 @@ void get_command()
else
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(MSG_ERR_NO_CHECKSUM);
SERIAL_ERRORRPGM(_i("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM c=0 r=0
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
@ -470,7 +470,7 @@ void get_command()
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM);
SERIAL_ERRORRPGM(_n("No Line Number with checksum, Last Line: "));////MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0
SERIAL_ERRORLN(gcode_LastN);
serial_count = 0;
return;
@ -483,8 +483,8 @@ void get_command()
if (Stopped == true) {
int gcode = strtol(strchr_pointer+1, NULL, 10);
if (gcode >= 0 && gcode <= 3) {
SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED);
LCD_MESSAGERPGM(MSG_STOPPED);
SERIAL_ERRORLNRPGM(_T(MSG_ERR_STOPPED));
LCD_MESSAGERPGM(_T(MSG_STOPPED));
}
}
} // end of 'G' command
@ -580,7 +580,7 @@ void get_command()
serial_count >= (MAX_CMD_SIZE - 1) || n==-1)
{
if(card.eof()){
SERIAL_PROTOCOLLNRPGM(MSG_FILE_PRINTED);
SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED c=0 r=0
stoptime=millis();
char time[30];
unsigned long t=(stoptime-starttime-pause_time)/1000;

2
Firmware/cmdqueue.h
View file

@ -2,7 +2,7 @@
#define CMDQUEUE_H
#include "Marlin.h"
#include "language_all.h"
#include "language.h"
// String circular buffer. Commands may be pushed to the buffer from both sides:

7
Firmware/config.h
View file

@ -18,4 +18,11 @@
#define TMC2130_SPCR SPI_SPCR(TMC2130_SPI_RATE, 1, 1, 1, 0)
#define TMC2130_SPSR SPI_SPSR(TMC2130_SPI_RATE)
//LANG - Multi-language support
//#define LANG_MODE 0 // primary language only
#define LANG_MODE 1 // sec. language support
#define LANG_SIZE_RESERVED 0x2700 // reserved space for secondary language (~10kb)
//#define LANG_SIZE_RESERVED 0x1ef8 // reserved space for secondary language (~10kb)
#endif //_CONFIG_H

97
Firmware/language.c Normal file
View file

@ -0,0 +1,97 @@
//language.c
#include "language.h"
#include <inttypes.h>
#include <avr/pgmspace.h>
#include "bootapp.h"
// Currectly active language selection.
unsigned char lang_selected = 0;
#if (LANG_MODE == 0) //primary language only
#else //(LANG_MODE == 0)
//reserved xx kbytes for secondary language table
const char _SEC_LANG[LANG_SIZE_RESERVED] PROGMEM_I2 = "_SEC_LANG";
#endif //(LANG_MODE == 0)
//lang_table_t structure - 16byte header
typedef struct
{
struct
{
uint32_t magic;
uint16_t size;
uint16_t count;
uint16_t checksum;
uint16_t reserved0;
uint32_t reserved1;
} header;
uint16_t table[];
} lang_table_t;
//lang_table pointer
lang_table_t* lang_table = 0;
const char* lang_get_translation(const char* s)
{
if (lang_selected == 0) return s + 2; //primary language selected
if (lang_table == 0) return s + 2; //sec. lang table not found
uint16_t ui = pgm_read_word(((uint16_t*)s)); //read string id
if (ui == 0xffff) return s + 2; //translation not found
ui = pgm_read_word(((uint16_t*)(((char*)lang_table + 16 + ui*2)))); //read relative offset
if (pgm_read_byte(((uint8_t*)((char*)lang_table + ui))) == 0)
return s + 2;//not translated string
return (const char*)((char*)lang_table + ui); //return calculated pointer
}
const char* lang_get_sec_lang_str(const char* s)
{
uint16_t ui = (uint16_t)&_SEC_LANG; //pointer to _SEC_LANG reserved space
ui += 0x00ff; //add 1 page
ui &= 0xff00; //align to page
lang_table_t* _lang_table = ui; //table pointer
ui = pgm_read_word(((uint16_t*)s)); //read string id
if (ui == 0xffff) return s + 2; //translation not found
ui = pgm_read_word(((uint16_t*)(((char*)_lang_table + 16 + ui*2)))); //read relative offset
return (const char*)((char*)_lang_table + ui); //return calculated pointer
}
const char* lang_select(unsigned char lang)
{
#if (LANG_MODE == 0) //primary language only
return 0;
#else //(LANG_MODE == 0)
if (lang == 0) //primary language
{
lang_table = 0;
lang_selected = 0;
return;
}
uint16_t ui = (uint16_t)&_SEC_LANG; //pointer to _SEC_LANG reserved space
ui += 0x00ff; //add 1 page
ui &= 0xff00; //align to page
lang_table = ui; //set table pointer
ui = pgm_read_word(((uint16_t*)(((char*)lang_table + 16)))); //read relative offset of first string (language name)
return (const char*)((char*)lang_table + ui); //return calculated pointer
#endif //(LANG_MODE == 0)
}
unsigned char lang_get_count()
{
uint16_t ui = (uint16_t)&_SEC_LANG; //pointer to _SEC_LANG reserved space
ui += 0x00ff; //add 1 page
ui &= 0xff00; //align to page
lang_table_t* _lang_table = ui; //table pointer
if (pgm_read_dword(((uint32_t*)(_lang_table + 0))) == 0x4bb45aa5) return 2;
return 1;
}
const char* lang_get_name(unsigned char lang)
{
if (lang == 0) return MSG_LANGUAGE_NAME + 2;
return lang_get_sec_lang_str(MSG_LANGUAGE_NAME);
}
const char MSG_LANGUAGE_NAME[] PROGMEM_I1 = ISTR("English"); ////c=0 r=0

78
Firmware/language.h
View file

@ -1,6 +1,9 @@
//language.h
#ifndef LANGUAGE_H
#define LANGUAGE_H
#include "config.h"
#define PROTOCOL_VERSION "1.0"
#ifdef CUSTOM_MENDEL_NAME
@ -9,8 +12,6 @@
#define MACHINE_NAME "Mendel"
#endif
#ifndef MACHINE_UUID
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
#endif
@ -20,14 +21,73 @@
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
//section progmem0 will be used for localized translated strings
#define PROGMEM_I2 __attribute__((section(".progmem0")))
//section progmem1 will be used for localized strings in english
#define PROGMEM_I1 __attribute__((section(".progmem1")))
//section progmem2 will be used for not localized strings in english
#define PROGMEM_N1 __attribute__((section(".progmem2")))
// Common serial messages
#define MSG_MARLIN "Marlin"
// Serial Console Messages (do not translate those!)
#if (LANG_MODE == 0) //primary language only
#define _I(s) (__extension__({static const char __c[] PROGMEM_I1 = s; &__c[0];}))
#define ISTR(s) s
#define _i(s) _I(s)
#define _T(s) s
#else //(LANG_MODE == 0)
#define _I(s) (__extension__({static const char __c[] PROGMEM_I1 = "\xff\xff" s; &__c[0];}))
#define ISTR(s) "\xff\xff" s
#define _i(s) lang_get_translation(_I(s))
#define _T(s) lang_get_translation(s)
#endif //(LANG_MODE == 0)
#define _N(s) (__extension__({static const char __c[] PROGMEM_N1 = s; &__c[0];}))
#define _n(s) _N(s)
// LCD Menu Messages
#include "language_all.h"
// Language indices into their particular symbol tables.
#define LANG_ID_PRI 0
#define LANG_ID_SEC 1
// Language is not defined and it shall be selected from the menu.
#define LANG_ID_FORCE_SELECTION 254
// Language is not defined on a virgin RAMBo board.
#define LANG_ID_UNDEFINED 255
// Default language ID, if no language is selected.
#define LANG_ID_DEFAULT LANG_ID_PRI
// Number of languages available in the language table.
#define LANG_NUM 2
#if defined(__cplusplus)
extern "C" {
#endif //defined(__cplusplus)
// Currectly active language selection.
extern unsigned char lang_selected;
#if (LANG_MODE != 0)
extern const char _SEC_LANG[LANG_SIZE_RESERVED];
#endif //(LANG_MODE == 0)
extern const char* lang_get_translation(const char* s);
extern const char* lang_get_sec_lang_str(const char* s);
extern const char* lang_select(unsigned char lang);
extern unsigned char lang_get_count();
extern const char* lang_get_name(unsigned char lang);
#if defined(__cplusplus)
}
#endif //defined(__cplusplus)
#define CAT2(_s1, _s2) _s1
#define CAT4(_s1, _s2, _s3, _s4) _s1
extern const char MSG_LANGUAGE_NAME[];
#include "messages.h"
#endif //LANGUAGE_H
#endif //__LANGUAGE_H

215
Firmware/mesh_bed_calibration.cpp
View file

@ -1,7 +1,7 @@
#include "Marlin.h"
#include "Configuration.h"
#include "ConfigurationStore.h"
#include "language_all.h"
#include "language.h"
#include "mesh_bed_calibration.h"
#include "mesh_bed_leveling.h"
#include "stepper.h"
@ -57,13 +57,36 @@ const float bed_skew_angle_extreme = (0.25f * M_PI / 180.f);
#ifdef HEATBED_V2
// Positions of the bed reference points in the machine coordinates, referenced to the P.I.N.D.A sensor.
// The points are the following: center front, center right, center rear, center left.
/**
* [0,0] bed print area point X coordinate in bed coordinates ver. 05d/24V
*/
#define BED_PRINT_ZERO_REF_X 2.f
/**
* [0,0] bed print area point Y coordinate in bed coordinates ver. 05d/24V
*/
#define BED_PRINT_ZERO_REF_Y 9.4f
/**
* @brief Positions of the bed reference points in print area coordinates. ver. 05d/24V
*
* Numeral constants are in bed coordinates, subtracting macro defined values converts it to print area coordinates.
*
* The points are the following:
* MK2: center front, center right, center rear, center left.
* MK25 and MK3: front left, front right, rear right, rear left
*/
const float bed_ref_points_4[] PROGMEM = {
13.f - BED_ZERO_REF_X, 10.4f - BED_ZERO_REF_Y,
221.f - BED_ZERO_REF_X, 10.4f - BED_ZERO_REF_Y,
221.f - BED_ZERO_REF_X, 202.4f - BED_ZERO_REF_Y,
13.f - BED_ZERO_REF_X, 202.4f - BED_ZERO_REF_Y
37.f - BED_PRINT_ZERO_REF_X - X_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_X,
18.4f - BED_PRINT_ZERO_REF_Y - Y_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_Y,
245.f - BED_PRINT_ZERO_REF_X - X_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_X,
18.4f - BED_PRINT_ZERO_REF_Y - Y_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_Y,
245.f - BED_PRINT_ZERO_REF_X - X_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_X,
210.4f - BED_PRINT_ZERO_REF_Y - Y_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_Y,
37.f - BED_PRINT_ZERO_REF_X - X_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_X,
210.4f - BED_PRINT_ZERO_REF_Y - Y_PROBE_OFFSET_FROM_EXTRUDER - SHEET_PRINT_ZERO_REF_Y
};
const float bed_ref_points[] PROGMEM = {
@ -732,19 +755,24 @@ void world2machine_reset()
}
/**
* @brief Set calibration matrix to default value
* @brief Get calibration matrix default value
*
* This is used if no valid calibration data can be read from EEPROM.
* @param [out] vec_x axis x vector
* @param [out] vec_y axis y vector
* @param [out] cntr offset vector
*/
static void world2machine_default()
static void world2machine_default(float vec_x[2], float vec_y[2], float cntr[2])
{
vec_x[0] = 1.f;
vec_x[1] = 0.f;
vec_y[0] = 0.f;
vec_y[1] = 1.f;
cntr[0] = 0.f;
#ifdef DEFAULT_Y_OFFSET
const float vx[] = { 1.f, 0.f };
const float vy[] = { 0.f, 1.f };
const float cntr[] = { 0.f, DEFAULT_Y_OFFSET };
world2machine_update(vx, vy, cntr);
cntr[1] = DEFAULT_Y_OFFSET;
#else
world2machine_reset();
cntr[1] = 0.f;
#endif
}
/**
@ -768,76 +796,105 @@ static inline bool vec_undef(const float v[2])
return vx[0] == 0x0FFFFFFFF || vx[1] == 0x0FFFFFFFF;
}
/**
* @brief Read and apply calibration data from EEPROM
* @brief Read calibration data from EEPROM
*
* If no calibration data has been stored in EEPROM or invalid,
* world2machine_default() is used.
*
* If stored calibration data is invalid, EEPROM storage is cleared.
*
* @param [out] vec_x axis x vector
* @param [out] vec_y axis y vector
* @param [out] cntr offset vector
*/
void world2machine_initialize()
void world2machine_read_valid(float vec_x[2], float vec_y[2], float cntr[2])
{
//SERIAL_ECHOLNPGM("world2machine_initialize");
float cntr[2] = {
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER+0)),
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER+4))
};
float vec_x[2] = {
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_X +0)),
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_X +4))
};
float vec_y[2] = {
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y +0)),
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y +4))
};
vec_x[0] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_X +0));
vec_x[1] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_X +4));
vec_y[0] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y +0));
vec_y[1] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y +4));
cntr[0] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER+0));
cntr[1] = eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER+4));
bool reset = false;
if (vec_undef(cntr) || vec_undef(vec_x) || vec_undef(vec_y)) {
// SERIAL_ECHOLNPGM("Undefined bed correction matrix.");
if (vec_undef(cntr) || vec_undef(vec_x) || vec_undef(vec_y))
{
#if 0
SERIAL_ECHOLNPGM("Undefined bed correction matrix.");
#endif
reset = true;
}
else {
else
{
// Length of the vec_x shall be close to unity.
float l = sqrt(vec_x[0] * vec_x[0] + vec_x[1] * vec_x[1]);
if (l < 0.9 || l > 1.1) {
// SERIAL_ECHOLNPGM("X vector length:");
// MYSERIAL.println(l);
// SERIAL_ECHOLNPGM("Invalid bed correction matrix. Length of the X vector out of range.");
if (l < 0.9 || l > 1.1)
{
#if 0
SERIAL_ECHOLNPGM("X vector length:");
MYSERIAL.println(l);
SERIAL_ECHOLNPGM("Invalid bed correction matrix. Length of the X vector out of range.");
#endif
reset = true;
}
// Length of the vec_y shall be close to unity.
l = sqrt(vec_y[0] * vec_y[0] + vec_y[1] * vec_y[1]);
if (l < 0.9 || l > 1.1) {
// SERIAL_ECHOLNPGM("Y vector length:");
// MYSERIAL.println(l);
// SERIAL_ECHOLNPGM("Invalid bed correction matrix. Length of the Y vector out of range.");
if (l < 0.9 || l > 1.1)
{
#if 0
SERIAL_ECHOLNPGM("Y vector length:");
MYSERIAL.println(l);
SERIAL_ECHOLNPGM("Invalid bed correction matrix. Length of the Y vector out of range.");
#endif
reset = true;
}
// Correction of the zero point shall be reasonably small.
l = sqrt(cntr[0] * cntr[0] + cntr[1] * cntr[1]);
if (l > 15.f) {
// SERIAL_ECHOLNPGM("Zero point correction:");
// MYSERIAL.println(l);
// SERIAL_ECHOLNPGM("Invalid bed correction matrix. Shift out of range.");
if (l > 15.f)
{
#if 0
SERIAL_ECHOLNPGM("Zero point correction:");
MYSERIAL.println(l);
SERIAL_ECHOLNPGM("Invalid bed correction matrix. Shift out of range.");
#endif
reset = true;
}
// vec_x and vec_y shall be nearly perpendicular.
l = vec_x[0] * vec_y[0] + vec_x[1] * vec_y[1];
if (fabs(l) > 0.1f) {
// SERIAL_ECHOLNPGM("Invalid bed correction matrix. X/Y axes are far from being perpendicular.");
if (fabs(l) > 0.1f)
{
#if 0
SERIAL_ECHOLNPGM("Invalid bed correction matrix. X/Y axes are far from being perpendicular.");
#endif
reset = true;
}
}
if (reset) {
// SERIAL_ECHOLNPGM("Invalid bed correction matrix. Resetting to identity.");
if (reset)
{
#if 0
SERIAL_ECHOLNPGM("Invalid bed correction matrix. Resetting to identity.");
#endif
reset_bed_offset_and_skew();
world2machine_default();
} else {
world2machine_default(vec_x, vec_y, cntr);
}
}
/**
* @brief Read and apply validated calibration data from EEPROM
*/
void world2machine_initialize()
{
#if 0
SERIAL_ECHOLNPGM("world2machine_initialize");
#endif
float vec_x[2];
float vec_y[2];
float cntr[2];
world2machine_read_valid(vec_x, vec_y, cntr);
world2machine_update(vec_x, vec_y, cntr);
/*
#if 0
SERIAL_ECHOPGM("world2machine_initialize() loaded: ");
MYSERIAL.print(world2machine_rotation_and_skew[0][0], 5);
SERIAL_ECHOPGM(", ");
@ -851,8 +908,7 @@ void world2machine_initialize()
SERIAL_ECHOPGM(", ");
MYSERIAL.print(world2machine_shift[1], 5);
SERIAL_ECHOLNPGM("");
*/
}
#endif
}
/**
@ -906,6 +962,10 @@ static inline void update_current_position_z()
// At the current position, find the Z stop.
inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, int verbosity_level)
{
#ifdef TMC2130
FORCE_HIGH_POWER_START;
#endif
#ifdef SUPPORT_VERBOSITY
if(verbosity_level >= 10) SERIAL_ECHOLNPGM("find bed induction sensor point z");
#endif // SUPPORT_VERBOSITY
@ -922,7 +982,7 @@ inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, i
if (! endstop_z_hit_on_purpose())
goto error;
#ifdef TMC2130
if ((tmc2130_mode == TMC2130_MODE_NORMAL) && (READ(Z_TMC2130_DIAG) != 0)) goto error; //crash Z detected
if (READ(Z_TMC2130_DIAG) != 0) goto error; //crash Z detected
#endif //TMC2130
for (uint8_t i = 0; i < n_iter; ++ i)
{
@ -937,7 +997,7 @@ inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, i
if (! endstop_z_hit_on_purpose())
goto error;
#ifdef TMC2130
if ((tmc2130_mode == TMC2130_MODE_NORMAL) && (READ(Z_TMC2130_DIAG) != 0)) goto error; //crash Z detected
if (READ(Z_TMC2130_DIAG) != 0) goto error; //crash Z detected
#endif //TMC2130
// SERIAL_ECHOPGM("Bed find_bed_induction_sensor_point_z low, height: ");
// MYSERIAL.print(current_position[Z_AXIS], 5);
@ -951,15 +1011,22 @@ inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, i
if (n_iter > 1)
current_position[Z_AXIS] /= float(n_iter);
enable_endstops(endstops_enabled);
enable_z_endstop(endstop_z_enabled);
// SERIAL_ECHOLNPGM("find_bed_induction_sensor_point_z 3");
#ifdef TMC2130
FORCE_HIGH_POWER_END;
#endif
return true;
error:
// SERIAL_ECHOLNPGM("find_bed_induction_sensor_point_z 4");
enable_endstops(endstops_enabled);
enable_z_endstop(endstop_z_enabled);
#ifdef TMC2130
FORCE_HIGH_POWER_END;
#endif
return false;
}
@ -2126,7 +2193,7 @@ BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level
#endif // SUPPORT_VERBOSITY
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line;
lcd_display_message_fullscreen_P(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1, next_line);
lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1), next_line);
if (next_line > 3)
next_line = 3;
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2138,10 +2205,10 @@ BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level
refresh_cmd_timeout();
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
lcd_implementation_print_at(0, next_line, k + 1);
lcd_printPGM(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2);
lcd_printPGM(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
if (iteration > 0) {
lcd_print_at_PGM(0, next_line + 1, MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION);
lcd_print_at_PGM(0, next_line + 1, _i("Iteration "));////MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
lcd_implementation_print(int(iteration + 1));
}
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2399,7 +2466,7 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line;
lcd_display_message_fullscreen_P(MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1, next_line);
lcd_display_message_fullscreen_P(_i("Improving bed calibration point"), next_line);////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
if (next_line > 3)
next_line = 3;
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2412,7 +2479,7 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
// Print the decrasing ID of the measurement point.
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
lcd_implementation_print_at(0, next_line, mesh_point+1);
lcd_printPGM(MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2);
lcd_printPGM(_i(" of 4"));////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
// Move up.
@ -2576,12 +2643,11 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
// In case of success, update the too_far_mask from the calculated points.
for (uint8_t mesh_point = 0; mesh_point < 2; ++ mesh_point) {
float y = vec_x[1] * pgm_read_float(bed_ref_points_4+mesh_point*2) + vec_y[1] * pgm_read_float(bed_ref_points_4+mesh_point*2+1) + cntr[1];
distance_from_min[mesh_point] = (y - Y_MIN_POS_CALIBRATION_POINT_OUT_OF_REACH);
#ifdef SUPPORT_VERBOSITY
if (verbosity_level >= 20) {
SERIAL_ECHOLNPGM("");
SERIAL_ECHOPGM("Distance from min:");
MYSERIAL.print(distance_from_min[mesh_point]);
MYSERIAL.print(y - Y_MIN_POS_CALIBRATION_POINT_OUT_OF_REACH);
SERIAL_ECHOLNPGM("");
SERIAL_ECHOPGM("y:");
MYSERIAL.print(y);
@ -2670,7 +2736,7 @@ bool sample_z() {
go_to_current(homing_feedrate[Z_AXIS] / 60);
//plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder););
lcd_show_fullscreen_message_and_wait_P(MSG_PLACE_STEEL_SHEET);
lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
// Sample Z heights for the mesh bed leveling.
// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
@ -2712,12 +2778,12 @@ bool sample_mesh_and_store_reference()
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line;
lcd_display_message_fullscreen_P(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1, next_line);
lcd_display_message_fullscreen_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1), next_line);
if (next_line > 3)
next_line = 3;
// display "point xx of yy"
lcd_implementation_print_at(0, next_line, 1);
lcd_printPGM(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2);
lcd_printPGM(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
// Sample Z heights for the mesh bed leveling.
@ -2737,7 +2803,7 @@ bool sample_mesh_and_store_reference()
#ifdef TMC2130
if (!axis_known_position[Z_AXIS] && (READ(Z_TMC2130_DIAG) != 0)) //Z crash
{
kill(MSG_BED_LEVELING_FAILED_POINT_LOW);
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
}
#endif //TMC2130
@ -2745,7 +2811,7 @@ bool sample_mesh_and_store_reference()
enable_endstops(false);
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(MSG_BED_LEVELING_FAILED_POINT_LOW);
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
}
mbl.set_z(0, 0, current_position[Z_AXIS]);
@ -2763,11 +2829,11 @@ bool sample_mesh_and_store_reference()
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
// display "point xx of yy"
lcd_implementation_print_at(0, next_line, mesh_point+1);
lcd_printPGM(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2);
lcd_printPGM(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{
kill(MSG_BED_LEVELING_FAILED_POINT_LOW);
kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false;
}
// Get cords of measuring point
@ -2960,8 +3026,7 @@ void babystep_reset()
babystepLoadZ = 0;
}
void count_xyz_details() {
float a1, a2;
void count_xyz_details(float (&distanceMin)[2]) {
float cntr[2] = {
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER + 0)),
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_CENTER + 4))
@ -2974,12 +3039,14 @@ void count_xyz_details() {
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y + 0)),
eeprom_read_float((float*)(EEPROM_BED_CALIBRATION_VEC_Y + 4))
};
#if 0
a2 = -1 * asin(vec_y[0] / MACHINE_AXIS_SCALE_Y);
a1 = asin(vec_x[1] / MACHINE_AXIS_SCALE_X);
//angleDiff = fabs(a2 - a1);
angleDiff = fabs(a2 - a1);
#endif
for (uint8_t mesh_point = 0; mesh_point < 2; ++mesh_point) {
float y = vec_x[1] * pgm_read_float(bed_ref_points_4 + mesh_point * 2) + vec_y[1] * pgm_read_float(bed_ref_points_4 + mesh_point * 2 + 1) + cntr[1];
distance_from_min[mesh_point] = (y - Y_MIN_POS_CALIBRATION_POINT_OUT_OF_REACH);
distanceMin[mesh_point] = (y - Y_MIN_POS_CALIBRATION_POINT_OUT_OF_REACH);
}
}

11
Firmware/mesh_bed_calibration.h
View file

@ -26,16 +26,10 @@ extern float world2machine_rotation_and_skew_inv[2][2];
// Shift of the machine zero point, in the machine coordinates.
extern float world2machine_shift[2];
// Resets the transformation to identity.
extern void world2machine_reset();
// Resets the transformation to identity and update current_position[X,Y] from the servos.
extern void world2machine_revert_to_uncorrected();
// Loads the transformation from the EEPROM, if available.
extern void world2machine_initialize();
// When switching from absolute to corrected coordinates,
// this will apply an inverse world2machine transformation
// to current_position[x,y].
extern void world2machine_read_valid(float vec_x[2], float vec_y[2], float cntr[2]);
extern void world2machine_update_current();
inline void world2machine(float &x, float &y)
@ -181,7 +175,8 @@ extern void babystep_undo();
// Reset the current babystep counter without moving the axes.
extern void babystep_reset();
extern void count_xyz_details();
extern void count_xyz_details(float (&distanceMin)[2]);
extern bool sample_z();
#endif /* MESH_BED_CALIBRATION_H */

120
Firmware/messages.c Normal file
View file

@ -0,0 +1,120 @@
//messages.c
#include "language.h"
//this is because we need include Configuration_prusa.h (CUSTOM_MENDEL_NAME)
#define bool char
#define true 1
#define false 0
#include "Configuration_prusa.h"
//internationalized messages
const char MSG_ALL[] PROGMEM_I1 = ISTR("All"); ////c=19 r=1
const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////c=0 r=0
const char MSG_AUTO_MODE_ON[] PROGMEM_I1 = ISTR("Mode [auto power]"); ////c=0 r=0
const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); ////c=0 r=0
const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////c=20 r=12
const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////c=0 r=0
const char MSG_BED_DONE[] PROGMEM_I1 = ISTR("Bed done"); ////c=0 r=0
const char MSG_BED_HEATING[] PROGMEM_I1 = ISTR("Bed Heating"); ////c=0 r=0
const char MSG_BED_LEVELING_FAILED_POINT_LOW[] PROGMEM_I1 = ISTR("Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."); ////c=20 r=4
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[] PROGMEM_I1 = ISTR("XYZ calibration failed. Please consult the manual."); ////c=20 r=8
const char MSG_CALIBRATE_Z_AUTO[] PROGMEM_I1 = ISTR("Calibrating Z"); ////c=20 r=2
const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////c=0 r=0
const char MSG_CONFIRM_NOZZLE_CLEAN[] PROGMEM_I1 = ISTR("Please clean the nozzle for calibration. Click when done."); ////c=20 r=8
const char MSG_COOLDOWN[] PROGMEM_I1 = ISTR("Cooldown"); ////c=0 r=0
const char MSG_CRASH_DETECTED[] PROGMEM_I1 = ISTR("Crash detected."); ////c=20 r=1
const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det. [N/A]"); ////c=0 r=0
const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det. [off]"); ////c=0 r=0
const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det. [on]"); ////c=0 r=0
const char MSG_ENDSTOP_HIT[] PROGMEM_I1 = ISTR("TRIGGERED"); ////c=0 r=0
const char MSG_ENDSTOP_OPEN[] PROGMEM_I1 = ISTR("open"); ////c=0 r=0
const char MSG_ENDSTOPS_HIT[] PROGMEM_I1 = ISTR("endstops hit: "); ////c=0 r=0
const char MSG_Enqueing[] PROGMEM_I1 = ISTR("enqueing \""); ////c=0 r=0
const char MSG_ERR_STOPPED[] PROGMEM_I1 = ISTR("Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"); ////c=0 r=0
const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0
const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////c=14 r=0
const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////c=20 r=2
const char MSG_FILAMENT_LOADING_T0[] PROGMEM_I1 = ISTR("Insert filament into extruder 1. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T1[] PROGMEM_I1 = ISTR("Insert filament into extruder 2. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T2[] PROGMEM_I1 = ISTR("Insert filament into extruder 3. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T3[] PROGMEM_I1 = ISTR("Insert filament into extruder 4. Click when done."); ////c=20 r=4
const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////c=0 r=0
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[] PROGMEM_I1 = ISTR("Searching bed calibration point"); ////c=60 r=0
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////c=14 r=0
const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////c=20 r=1
const char MSG_FOLLOW_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
const char MSG_FSENS_AUTOLOAD_NA[] PROGMEM_I1 = ISTR("F. autoload [N/A]"); ////c=17 r=1
const char MSG_FSENSOR_OFF[] PROGMEM_I1 = ISTR("Fil. sensor [off]"); ////c=0 r=0
const char MSG_FSENSOR_ON[] PROGMEM_I1 = ISTR("Fil. sensor [on]"); ////c=0 r=0
const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////c=0 r=0
const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20 r=0
const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////c=0 r=0
const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20 r=1
const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////c=17 r=0
const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20 r=0
const char MSG_M117_V2_CALIBRATION[] PROGMEM_I1 = ISTR("M117 First layer cal."); ////c=25 r=1
const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////c=0 r=0
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[] PROGMEM_I1 = ISTR("Measuring reference height of calibration point"); ////c=60 r=0
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9"); ////c=14 r=0
const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////c=0 r=0
const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=0 r=0
const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0
const char MSG_OK[] PROGMEM_I1 = ISTR("ok"); ////c=0 r=0
const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0
const char MSG_POWERUP[] PROGMEM_I1 = ISTR("PowerUp"); ////c=0 r=0
const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20 r=0
const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4
const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20 r=0
const char MSG_PULL_OUT_FILAMENT[] PROGMEM_I1 = ISTR("Please pull out filament immediately"); ////c=20 r=4
const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover print?"); ////c=20 r=2
const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////c=0 r=0
const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4
const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_I1 = ISTR("error writing to file"); ////c=0 r=0
const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_I1 = ISTR("open failed, File: "); ////c=0 r=0
const char MSG_SD_WORKDIR_FAIL[] PROGMEM_I1 = ISTR("workDir open failed"); ////c=0 r=0
const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20 r=0
const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20 r=0
const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20 r=0
const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////c=20 r=0
const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////c=19 r=0
const char MSG_SELFTEST_FAN_YES[] PROGMEM_I1 = ISTR("Spinning"); ////c=19 r=0
const char MSG_SELFTEST_CHECK_BED[] PROGMEM_I1 = ISTR("Checking bed "); ////c=20 r=0
const char MSG_SELFTEST_CHECK_FSENSOR[] PROGMEM_I1 = ISTR("Checking sensors "); ////c=20 r=0
const char MSG_SELFTEST_MOTOR[] PROGMEM_I1 = ISTR("Motor"); ////c=0 r=0
const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////c=0 r=0
const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////c=0 r=0
const char MSG_SILENT_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [high power]"); ////c=0 r=0
const char MSG_SILENT_MODE_ON[] PROGMEM_I1 = ISTR("Mode [silent]"); ////c=0 r=0
const char MSG_STEALTH_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [Normal]"); ////c=0 r=0
const char MSG_STEALTH_MODE_ON[] PROGMEM_I1 = ISTR("Mode [Stealth]"); ////c=0 r=0
const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////c=20 r=2
const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////c=0 r=0
const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////c=0 r=0
const char MSG_TEMP_CALIBRATION[] PROGMEM_I1 = ISTR("Temp. cal. "); ////c=20 r=1
const char MSG_TEMP_CALIBRATION_DONE[] PROGMEM_I1 = ISTR("Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."); ////c=20 r=12
const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////c=17 r=0
const char MSG_UNLOADING_FILAMENT[] PROGMEM_I1 = ISTR("Unloading filament"); ////c=20 r=1
const char MSG_WATCH[] PROGMEM_I1 = ISTR("Info screen"); ////c=0 r=0
const char MSG_WIZARD_CALIBRATION_FAILED[] PROGMEM_I1 = ISTR("Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."); ////c=20 r=8
const char MSG_WIZARD_DONE[] PROGMEM_I1 = ISTR("All is done. Happy printing!"); ////c=20 r=8
const char MSG_WIZARD_HEATING[] PROGMEM_I1 = ISTR("Preheating nozzle. Please wait."); ////c=20 r=3
const char MSG_WIZARD_QUIT[] PROGMEM_I1 = ISTR("You can always resume the Wizard from Calibration -> Wizard."); ////c=20 r=8
const char MSG_YES[] PROGMEM_I1 = ISTR("Yes"); ////c=0 r=0
const char WELCOME_MSG[] PROGMEM_I1 = ISTR(CUSTOM_MENDEL_NAME " ready."); ////c=20 r=0
//not internationalized messages
const char MSG_BROWNOUT_RESET[] PROGMEM_N1 = " Brown out Reset"; ////c=0 r=0
const char MSG_EXTERNAL_RESET[] PROGMEM_N1 = " External Reset"; ////c=0 r=0
const char MSG_FILE_SAVED[] PROGMEM_N1 = "Done saving file."; ////c=0 r=0
const char MSG_OFF[] PROGMEM_N1 = "Off"; ////c=0 r=0
const char MSG_ON[] PROGMEM_N1 = "On "; ////c=0 r=0
const char MSG_POSITION_UNKNOWN[] PROGMEM_N1 = "Home X/Y before Z"; ////c=0 r=0
const char MSG_SOFTWARE_RESET[] PROGMEM_N1 = " Software Reset"; ////c=0 r=0
const char MSG_UNKNOWN_COMMAND[] PROGMEM_N1 = "Unknown command: \""; ////c=0 r=0
const char MSG_WATCHDOG_RESET[] PROGMEM_N1 = " Watchdog Reset"; ////c=0 r=0
const char MSG_Z_MAX[] PROGMEM_N1 = "z_max: "; ////c=0 r=0
const char MSG_Z_MIN[] PROGMEM_N1 = "z_min: "; ////c=0 r=0
const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////c=0 r=0
const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////c=0 r=0

117
Firmware/messages.h Normal file
View file

@ -0,0 +1,117 @@
//messages.h
// Common serial messages
#define MSG_MARLIN "Marlin"
// LCD Menu Messages
//internationalized messages
extern const char MSG_ALL[];
extern const char MSG_AUTO_HOME[];
extern const char MSG_AUTO_MODE_ON[];
extern const char MSG_BABYSTEP_Z[];
extern const char MSG_BABYSTEP_Z_NOT_SET[];
extern const char MSG_BED[];
extern const char MSG_BED_DONE[];
extern const char MSG_BED_HEATING[];
extern const char MSG_BED_LEVELING_FAILED_POINT_LOW[];
extern const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[];
extern const char MSG_CALIBRATE_Z_AUTO[];
extern const char MSG_CARD_MENU[];
extern const char MSG_CONFIRM_NOZZLE_CLEAN[];
extern const char MSG_COOLDOWN[];
extern const char MSG_CRASH_DETECTED[];
extern const char MSG_CRASHDETECT_NA[];
extern const char MSG_CRASHDETECT_OFF[];
extern const char MSG_CRASHDETECT_ON[];
extern const char MSG_ENDSTOP_HIT[];
extern const char MSG_ENDSTOP_OPEN[];
extern const char MSG_ENDSTOPS_HIT[];
extern const char MSG_Enqueing[];
extern const char MSG_ERR_STOPPED[];
extern const char MSG_ERROR[];
extern const char MSG_EXTRUDER[];
extern const char MSG_FAN_SPEED[];
extern const char MSG_FILAMENT_CLEAN[];
extern const char MSG_FILAMENT_LOADING_T0[];
extern const char MSG_FILAMENT_LOADING_T1[];
extern const char MSG_FILAMENT_LOADING_T2[];
extern const char MSG_FILAMENT_LOADING_T3[];
extern const char MSG_FILAMENTCHANGE[];
extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[];
extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[];
extern const char MSG_FINISHING_MOVEMENTS[];
extern const char MSG_FOLLOW_CALIBRATION_FLOW[];
extern const char MSG_FSENS_AUTOLOAD_NA[];
extern const char MSG_FSENSOR_OFF[];
extern const char MSG_FSENSOR_ON[];
extern const char MSG_HEATING[];
extern const char MSG_HEATING_COMPLETE[];
extern const char MSG_HOMEYZ[];
extern const char MSG_CHOOSE_EXTRUDER[];
extern const char MSG_LOAD_FILAMENT[];
extern const char MSG_LOADING_FILAMENT[];
extern const char MSG_M117_V2_CALIBRATION[];
extern const char MSG_MAIN[];
extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[];
extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[];
extern const char MSG_MENU_CALIBRATION[];
extern const char MSG_NO[];
extern const char MSG_NOZZLE[];
extern const char MSG_OK[];
extern const char MSG_PAPER[];
extern const char MSG_PLACE_STEEL_SHEET[];
extern const char MSG_PLEASE_WAIT[];
extern const char MSG_POWERUP[];
extern const char MSG_PREHEAT_NOZZLE[];
extern const char MSG_PRESS_TO_UNLOAD[];
extern const char MSG_PRINT_ABORTED[];
extern const char MSG_PULL_OUT_FILAMENT[];
extern const char MSG_RECOVER_PRINT[];
extern const char MSG_REFRESH[];
extern const char MSG_REMOVE_STEEL_SHEET[];
extern const char MSG_SD_ERR_WRITE_TO_FILE[];
extern const char MSG_SD_OPEN_FILE_FAIL[];
extern const char MSG_SD_WORKDIR_FAIL[];
extern const char MSG_SELFTEST_COOLING_FAN[];
extern const char MSG_SELFTEST_EXTRUDER_FAN[];
extern const char MSG_SELFTEST_FAILED[];
extern const char MSG_SELFTEST_FAN[];
extern const char MSG_SELFTEST_FAN_NO[];
extern const char MSG_SELFTEST_FAN_YES[];
extern const char MSG_SELFTEST_CHECK_BED[];
extern const char MSG_SELFTEST_CHECK_FSENSOR[];
extern const char MSG_SELFTEST_MOTOR[];
extern const char MSG_SELFTEST_WIRINGERROR[];
extern const char MSG_SETTINGS[];
extern const char MSG_SILENT_MODE_OFF[];
extern const char MSG_SILENT_MODE_ON[];
extern const char MSG_STEALTH_MODE_OFF[];
extern const char MSG_STEALTH_MODE_ON[];
extern const char MSG_STEEL_SHEET_CHECK[];
extern const char MSG_STOP_PRINT[];
extern const char MSG_STOPPED[];
extern const char MSG_TEMP_CALIBRATION[];
extern const char MSG_TEMP_CALIBRATION_DONE[];
extern const char MSG_UNLOAD_FILAMENT[];
extern const char MSG_UNLOADING_FILAMENT[];
extern const char MSG_WATCH[];
extern const char MSG_WIZARD_CALIBRATION_FAILED[];
extern const char MSG_WIZARD_DONE[];
extern const char MSG_WIZARD_HEATING[];
extern const char MSG_WIZARD_QUIT[];
extern const char MSG_YES[];
extern const char WELCOME_MSG[];
//not internationalized messages
extern const char MSG_BROWNOUT_RESET[];
extern const char MSG_EXTERNAL_RESET[];
extern const char MSG_FILE_SAVED[];
extern const char MSG_OFF[];
extern const char MSG_ON[];
extern const char MSG_POSITION_UNKNOWN[];
extern const char MSG_SOFTWARE_RESET[];
extern const char MSG_UNKNOWN_COMMAND[];
extern const char MSG_WATCHDOG_RESET[];
extern const char MSG_Z_MAX[];
extern const char MSG_Z_MIN[];
extern const char MSG_ZPROBE_OUT[];
extern const char MSG_ZPROBE_ZOFFSET[];

4
Firmware/planner.cpp
View file

@ -742,7 +742,7 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(MSG_ERR_COLD_EXTRUDE_STOP);
SERIAL_ECHOLNRPGM(_i(" cold extrusion prevented"));////MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
}
#ifdef PREVENT_LENGTHY_EXTRUDE
@ -754,7 +754,7 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(MSG_ERR_LONG_EXTRUDE_STOP);
SERIAL_ECHOLNRPGM(_n(" too long extrusion prevented"));////MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0
}
#endif
}

8
Firmware/sm4.c
View file

@ -53,7 +53,7 @@ uint8_t sm4_get_dir(uint8_t axis)
case 1: return (PORTL & 1)?0:1;
case 2: return (PORTL & 4)?0:1;
case 3: return (PORTL & 64)?1:0;
#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
case 0: return (PORTL & 1)?1:0;
case 1: return (PORTL & 2)?0:1;
case 2: return (PORTL & 4)?1:0;
@ -72,7 +72,7 @@ void sm4_set_dir(uint8_t axis, uint8_t dir)
case 1: if (!dir) PORTL |= 1; else PORTL &= ~1; break;
case 2: if (!dir) PORTL |= 4; else PORTL &= ~4; break;
case 3: if (dir) PORTL |= 64; else PORTL &= ~64; break;
#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
case 0: if (dir) PORTL |= 1; else PORTL &= ~1; break;
case 1: if (!dir) PORTL |= 2; else PORTL &= ~2; break;
case 2: if (dir) PORTL |= 4; else PORTL &= ~4; break;
@ -93,7 +93,7 @@ uint8_t sm4_get_dir_bits(void)
if (portL & 4) dir_bits |= 4;
if (portL & 64) dir_bits |= 8;
dir_bits ^= 0x07; //invert XYZ, do not invert E
#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
if (portL & 1) dir_bits |= 1;
if (portL & 2) dir_bits |= 2;
if (portL & 4) dir_bits |= 4;
@ -114,7 +114,7 @@ void sm4_set_dir_bits(uint8_t dir_bits)
if (dir_bits & 2) portL |= 1; //set Y direction bit
if (dir_bits & 4) portL |= 4; //set Z direction bit
if (dir_bits & 8) portL |= 64; //set E direction bit
#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
dir_bits ^= 0x0a; //invert YE, do not invert XZ
if (dir_bits & 1) portL |= 1; //set X direction bit
if (dir_bits & 2) portL |= 2; //set Y direction bit

10
Firmware/stepper.cpp
View file

@ -227,18 +227,18 @@ void checkHitEndstops()
{
if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_ENDSTOPS_HIT);
SERIAL_ECHORPGM(_T(MSG_ENDSTOPS_HIT));
if(endstop_x_hit) {
SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT, PSTR("X")));
LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("X")));
}
if(endstop_y_hit) {
SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT, PSTR("Y")));
LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("Y")));
}
if(endstop_z_hit) {
SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT,PSTR("Z")));
LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT),PSTR("Z")));
}
SERIAL_ECHOLN("");
endstop_x_hit=false;
@ -342,7 +342,7 @@ FORCE_INLINE unsigned short calc_timer(uint16_t step_rate) {
timer = (unsigned short)pgm_read_word_near(table_address);
timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3);
}
if(timer < 100) { timer = 100; MYSERIAL.print(MSG_STEPPER_TOO_HIGH); MYSERIAL.println(step_rate); }//(20kHz this should never happen)
if(timer < 100) { timer = 100; MYSERIAL.print(_i("Steprate too high: ")); MYSERIAL.println(step_rate); }//(20kHz this should never happen)////MSG_STEPPER_TOO_HIGH c=0 r=0
return timer;
}

14
Firmware/tmc2130.cpp
View file

@ -76,8 +76,12 @@ bool tmc2130_sg_change = false;
bool skip_debug_msg = false;
#define DBG(args...) printf_P(args)
#ifndef _n
#define _n PSTR
#endif //_n
#ifndef _i
#define _i PSTR
#endif //_i
//TMC2130 registers
#define TMC2130_REG_GCONF 0x00 // 17 bits
@ -210,9 +214,11 @@ void tmc2130_init()
tmc2130_sg_cnt[3] = 0;
#ifdef TMC2130_LINEARITY_CORRECTION
// tmc2130_set_wave(X_AXIS, 247, tmc2130_wave_fac[X_AXIS]);
// tmc2130_set_wave(Y_AXIS, 247, tmc2130_wave_fac[Y_AXIS]);
// tmc2130_set_wave(Z_AXIS, 247, tmc2130_wave_fac[Z_AXIS]);
#ifdef TMC2130_LINEARITY_CORRECTION_XYZ
tmc2130_set_wave(X_AXIS, 247, tmc2130_wave_fac[X_AXIS]);
tmc2130_set_wave(Y_AXIS, 247, tmc2130_wave_fac[Y_AXIS]);
tmc2130_set_wave(Z_AXIS, 247, tmc2130_wave_fac[Z_AXIS]);
#endif //TMC2130_LINEARITY_CORRECTION_XYZ
tmc2130_set_wave(E_AXIS, 247, tmc2130_wave_fac[E_AXIS]);
#endif //TMC2130_LINEARITY_CORRECTION
@ -413,7 +419,7 @@ void tmc2130_check_overtemp()
lcd.print(' ');
}
}
#endif DEBUG_CRASHDET_COUNTERS
#endif //DEBUG_CRASHDET_COUNTERS
}
void tmc2130_setup_chopper(uint8_t axis, uint8_t mres, uint8_t current_h, uint8_t current_r)

1008
Firmware/ultralcd.cpp
View file

File diff suppressed because it is too large Load diff

2
Firmware/ultralcd.h
View file

@ -295,8 +295,6 @@ void lcd_temp_calibration_set();
void display_loading();
void lcd_service_mode_show_result();
#if !SDSORT_USES_RAM
void lcd_set_degree();
void lcd_set_progress();

20
Firmware/ultralcd_implementation_hitachi_HD44780.h
View file

@ -934,22 +934,22 @@ if (print_sd_status)
{
case 1:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING);
lcd_printPGM(_T(MSG_HEATING));
break;
case 2:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING_COMPLETE);
lcd_printPGM(_T(MSG_HEATING_COMPLETE));
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
break;
case 3:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_HEATING);
lcd_printPGM(_T(MSG_BED_HEATING));
break;
case 4:
lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_DONE);
lcd_printPGM(_T(MSG_BED_DONE));
heating_status = 0;
heating_status_counter = 0;
custom_message = false;
@ -968,7 +968,7 @@ if (print_sd_status)
lcd.setCursor(0, 3);
lcd_printPGM(PSTR(" "));
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HOMEYZ_PROGRESS);
lcd_printPGM(_i("Calibrating Z"));////MSG_HOMEYZ_PROGRESS c=0 r=0
lcd_printPGM(PSTR(" : "));
lcd.print(custom_message_state-10);
}
@ -976,8 +976,8 @@ if (print_sd_status)
{
if (custom_message_state == 3)
{
lcd_printPGM(WELCOME_MSG);
lcd_setstatuspgm(WELCOME_MSG);
lcd_printPGM(_T(WELCOME_MSG));
lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false;
custom_message_type = 0;
}
@ -986,7 +986,7 @@ if (print_sd_status)
lcd.setCursor(0, 3);
lcd_printPGM(PSTR(" "));
lcd.setCursor(0, 3);
lcd_printPGM(MSG_HOMEYZ_DONE);
lcd_printPGM(_i("Calibration done"));////MSG_HOMEYZ_DONE c=0 r=0
custom_message_state--;
}
}
@ -1012,7 +1012,7 @@ if (print_sd_status)
if (custom_message_type == 4) {
char progress[4];
lcd.setCursor(0, 3);
lcd_printPGM(MSG_TEMP_CALIBRATION);
lcd_printPGM(_T(MSG_TEMP_CALIBRATION));
lcd.setCursor(12, 3);
sprintf(progress, "%d/6", custom_message_state);
lcd.print(progress);
@ -1020,7 +1020,7 @@ if (print_sd_status)
// temp compensation preheat
if (custom_message_type == 5) {
lcd.setCursor(0, 3);
lcd_printPGM(MSG_PINDA_PREHEAT);
lcd_printPGM(_i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1
if (custom_message_state <= PINDA_HEAT_T) {
lcd_printPGM(PSTR(": "));
lcd.print(custom_message_state); //seconds

4
Firmware/util.cpp
View file

@ -289,11 +289,11 @@ bool show_upgrade_dialog_if_version_newer(const char *version_string)
}
if (upgrade) {
lcd_display_message_fullscreen_P(MSG_NEW_FIRMWARE_AVAILABLE);
lcd_display_message_fullscreen_P(_i("New firmware version available:"));////MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
lcd_print_at_PGM(0, 2, PSTR(""));
for (const char *c = version_string; ! is_whitespace_or_nl_or_eol(*c); ++ c)
lcd_implementation_write(*c);
lcd_print_at_PGM(0, 3, MSG_NEW_FIRMWARE_PLEASE_UPGRADE);
lcd_print_at_PGM(0, 3, _i("Please upgrade."));////MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0
tone(BEEPER, 1000);
delay_keep_alive(50);
noTone(BEEPER);

6
Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
View file

@ -42,9 +42,9 @@ AXIS SETTINGS
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
#define X_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
// Direction inverting
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true

6
Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
View file

@ -42,9 +42,9 @@ AXIS SETTINGS
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
#define X_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
// Direction inverting
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true

15
Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
View file

@ -38,9 +38,9 @@
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,133}
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
#define X_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
// Direction inverting
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
@ -75,6 +75,15 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
/**
* [0,0] steel sheet print area point X coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_X 0.f
/**
* [0,0] steel sheet print area point Y coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_Y 0.f
#define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)

15
Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
View file

@ -38,9 +38,9 @@
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,133}
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
#define X_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
// Direction inverting
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
@ -75,6 +75,15 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
/**
* [0,0] steel sheet print area point X coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_X 0.f
/**
* [0,0] steel sheet print area point Y coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_Y 0.f
#define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)

24
Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
View file

@ -39,9 +39,9 @@
//#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,560}
// Endstop inverting
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
#define X_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
#define Z_MIN_ENDSTOP_INVERTING 0 // set to true to invert the logic of the endstop.
// Direction inverting
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
@ -76,7 +76,15 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
#define DEFAULT_Y_OFFSET 2.f // Offset of [0;0] point, when the printer is not calibrated
//#define DEFAULT_Y_OFFSET 4.f // Default distance of Y_MIN_POS point from endstop, when the printer is not calibrated.
/**
* [0,0] steel sheet print area point X coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_X 0.f
/**
* [0,0] steel sheet print area point Y coordinate in bed print area coordinates
*/
#define SHEET_PRINT_ZERO_REF_Y -2.f
#define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)
@ -173,6 +181,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
//#define EXPERIMENTAL_FEATURES
#define TMC2130_LINEARITY_CORRECTION
#define TMC2130_LINEARITY_CORRECTION_XYZ
//#define TMC2130_VARIABLE_RESOLUTION
@ -200,11 +209,6 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define TMC2130_PWM_AUTO_Y 1 // PWMCONF
#define TMC2130_PWM_FREQ_Y 2 // PWMCONF
#define TMC2130_PWM_GRAD_E 2 // PWMCONF
#define TMC2130_PWM_AMPL_E 235 // PWMCONF
#define TMC2130_PWM_AUTO_E 1 // PWMCONF
#define TMC2130_PWM_FREQ_E 2 // PWMCONF
#define TMC2130_PWM_GRAD_Z 4 // PWMCONF
#define TMC2130_PWM_AMPL_Z 200 // PWMCONF
#define TMC2130_PWM_AUTO_Z 1 // PWMCONF
@ -408,7 +412,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
#define Y_PROBE_OFFSET_FROM_EXTRUDER 3 // Z probe to nozzle Y offset: -front +behind
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4 // Z probe to nozzle Z offset: -below (always!)
#endif

2
Firmware/xyzcal.cpp
View file

@ -21,7 +21,9 @@
#define DBG(args...) printf_P(args)
//#define DBG(args...)
#ifndef _n
#define _n PSTR
#endif //_n
#define _X ((int16_t)count_position[X_AXIS])
#define _Y ((int16_t)count_position[Y_AXIS])

1032
lang/lang_en.txt Normal file
View file

File diff suppressed because it is too large Load diff

1376
lang/lang_en_cz.txt Normal file
View file

File diff suppressed because it is too large Load diff

1376
lang/lang_en_de.txt Normal file
View file

File diff suppressed because it is too large Load diff

1376
lang/lang_en_es.txt Normal file
View file

File diff suppressed because it is too large Load diff

1376
lang/lang_en_it.txt Normal file
View file

File diff suppressed because it is too large Load diff

1376
lang/lang_en_pl.txt Normal file
View file

File diff suppressed because it is too large Load diff

138
lang/make_lang.sh Normal file
View file

@ -0,0 +1,138 @@
#!/bin/sh
# makelang.sh - multi-language support high-level script
# for generating lang_xx.bin (secondary language binary file)
#
# Input files:
# lang_en.txt
# lang_en_$LANG.txt
#
# Output files:
# lang_en.tmp (temporary, will be removed when finished)
# lang_en_$LANG.tmp ==||==
# lang_en_$LANG.dif ==||==
# lang_$LANG.txt
#
#
# Selected language:
LANG=$1
if [ -z "$LANG" ]; then LANG='cz'; fi
#
#
function finish
{
if [ "$1" == "0" ]; then
if [ -e lang_en.tmp ]; then rm lang_en.tmp; fi
if [ -e lang_en_$LANG.tmp ]; then rm lang_en_$LANG.tmp; fi
if [ -e lang_en_$LANG.dif ]; then rm lang_en_$LANG.dif; fi
fi
echo
if [ "$1" == "0" ]; then
echo "make_lang.sh finished with success" >&2
else
echo "make_lang.sh finished with errors!" >&2
fi
case "$-" in
*i*) echo "press enter key"; read ;;
esac
exit $1
}
echo "make_lang.sh started" >&2
echo "selected language=$LANG" >&2
#check if input files exists
echo -n " checking input files..." >&2
if [ ! -e lang_en.txt ]; then echo "NG! file lang_en.txt not found!" >&2; exit 1; fi
if [ ! -e lang_en_$LANG.txt ]; then echo "NG! file lang_en_$LANG.txt not found!" >&2; exit 1; fi
echo "OK" >&2
#filter comment and empty lines from key and dictionary files, create temporary files
echo -n " creating tmp files..." >&2
cat lang_en.txt | sed "/^$/d;/^#/d" > lang_en.tmp
cat lang_en_$LANG.txt | sed "/^$/d;/^#/d" > lang_en_$LANG.tmp
echo "OK" >&2
#cat lang_en_$LANG.tmp | sed 'n;d' >test1.txt
#compare files using diff and check for differences
echo -n " comparing tmp files..." >&2
if ! cat lang_en_$LANG.tmp | sed 'n;d' | diff lang_en.tmp - > lang_en_$LANG.dif; then
echo "NG!" >&2
echo "Entries in lang_en_$LANG.txt are different from lang_en.txt!" >&2
echo "please check lang_en_$LANG.dif" >&2
finish 1
fi
echo "OK" >&2
#generate lang_xx.txt (secondary language text data sorted by ids)
echo -n " generating lang_$LANG.txt..." >&2
cat lang_en_$LANG.tmp | sed '1~2d' | sed "s/^\"\\\\x00/\"/" > lang_$LANG.txt
echo "OK" >&2
#generate lang_xx.dat (secondary language text data in binary form)
echo -n " generating lang_$LANG.dat..." >&2
cat lang_$LANG.txt | sed "s/\\\\/\\\\\\\\/g" | while read s; do
s=${s#\"}
s=${s%\"}
echo -n -e "$s"'\x00'
done >lang_$LANG.dat
echo "OK" >&2
#calculate variables
lt_magic='\xa5\x5a\xb4\x4b'
lt_count=$(grep -c '^' lang_$LANG.txt)
lt_data_size=$(wc -c lang_$LANG.dat | cut -f1 -d' ')
lt_offs_size=$((2 * $lt_count))
lt_size=$((16 + $lt_offs_size + $lt_data_size))
lt_chsum=1
lt_resv0='\xff\xff'
lt_resv1='\xff\xff\xff\xff'
#generate lang_xx.ofs (secondary language text data offset table)
echo -n " generating lang_$LANG.ofs..." >&2
cat lang_$LANG.txt | sed "s/\\\\x[0-9a-f][0-9a-f]/\./g;s/\\\\[0-7][0-7][0-7]/\./g" |\
awk 'BEGIN { o='$((16 + $lt_offs_size))';} { printf("%d\n",o); o+=(length($0)-1); }' > lang_$LANG.ofs
echo "OK" >&2
#generate lang_xx.bin (secondary language result binary file)
echo " generating lang_$LANG.bin:" >&2
#create empty file
dd if=/dev/zero of=lang_$LANG.bin bs=1 count=$lt_size 2>/dev/null
#awk code to format ui16 variables for dd
awk_ui16='{ h=int($1/256); printf("\\x%02x\\x%02x\n", int($1-256*h), h); }'
#write data to binary file with dd
echo -n " writing header (16 bytes)..." >&2
echo -n -e "$lt_magic" |\
dd of=lang_$LANG.bin bs=1 count=4 seek=0 conv=notrunc 2>/dev/null
echo -n -e $(echo -n "$lt_size" | awk "$awk_ui16") |\
dd of=lang_$LANG.bin bs=1 count=2 seek=4 conv=notrunc 2>/dev/null
echo -n -e $(echo -n "$lt_count" | awk "$awk_ui16") |\
dd of=lang_$LANG.bin bs=1 count=2 seek=6 conv=notrunc 2>/dev/null
echo -n -e $(echo -n "$lt_chsum" | awk "$awk_ui16") |\
dd of=lang_$LANG.bin bs=1 count=2 seek=8 conv=notrunc 2>/dev/null
echo -n -e "$lt_resv0" |\
dd of=lang_$LANG.bin bs=1 count=2 seek=10 conv=notrunc 2>/dev/null
echo -n -e "$lt_resv1" |\
dd of=lang_$LANG.bin bs=1 count=4 seek=12 conv=notrunc 2>/dev/null
echo "OK" >&2
echo -n " writing offset table ($lt_offs_size bytes)..." >&2
echo -n -e $(cat lang_$LANG.ofs | awk "$awk_ui16" | tr -d '\n'; echo) |\
dd of=./lang_$LANG.bin bs=1 count=$lt_offs_size seek=16 conv=notrunc 2>/dev/null
echo "OK" >&2
echo -n " writing text data ($lt_data_size bytes)..." >&2
dd if=./lang_$LANG.dat of=./lang_$LANG.bin bs=1 count=$lt_data_size seek=$((16 + $lt_offs_size)) conv=notrunc 2>/dev/null
echo "OK" >&2
echo " lang_table details:" >&2
echo " lt_count = $lt_count" >&2
echo " lt_size = $lt_size" >&2
echo " lt_chsum = $lt_chsum" >&2
finish 0

28
lang/po/lang_cz.po Normal file
View file

@ -0,0 +1,28 @@
# Translation into Czech.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ultralcd.cpp:6304
msgid " [off"
msgstr ""
#: ultralcd.cpp:2362
msgid "[0;0] point offset"
msgstr ""
#: ultralcd.cpp:4213
msgid "E-correct"
msgstr ""
#: ultralcd.cpp:607
msgid "Printer disconnected"
msgstr ""
#: Marlin_main.cpp:3504
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""

292
lang/po/lang_de.po Normal file
View file

@ -0,0 +1,292 @@
# Translation into German.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ultralcd.cpp:6312
msgid " [off"
msgstr ""
#: ultralcd.cpp:2362
msgid "[0;0] point offset"
msgstr ""
#: ultralcd.cpp:3613
msgid "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
msgstr ""
#: ultralcd.cpp:3626
msgid "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
msgstr ""
#: ultralcd.cpp:5803
msgid "AutoLoad filament"
msgstr ""
#: ultralcd.cpp:3642
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr ""
#: ultralcd.cpp:2089
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr ""
#: ultralcd.cpp:7007
msgid "Axis length"
msgstr ""
#: ultralcd.cpp:7009
msgid "Axis"
msgstr ""
#: ultralcd.cpp:1738
msgid "Belt status"
msgstr ""
#: messages.c:72
msgid "Blackout occurred. Recover print?"
msgstr ""
#: messages.c:28
msgid "Crash det. [on]"
msgstr ""
#: messages.c:26
msgid "Crash det. [N/A]"
msgstr ""
#: messages.c:27
msgid "Crash det. [off]"
msgstr ""
#: messages.c:25
msgid "Crash detected."
msgstr ""
#: ultralcd.cpp:4213
msgid "E-correct"
msgstr ""
#: ultralcd.cpp:5843
msgid "Error - static memory has been overwritten"
msgstr ""
#: ultralcd.cpp:3656
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr ""
#: ultralcd.cpp:7244
msgid "Extruder fan:"
msgstr ""
#: ultralcd.cpp:1840
msgid "Extruder info"
msgstr ""
#: ultralcd.cpp:4178
msgid "F. autoload [on]"
msgstr ""
#: messages.c:47
msgid "F. autoload [N/A]"
msgstr ""
#: ultralcd.cpp:4181
msgid "F. autoload [off]"
msgstr ""
#: ultralcd.cpp:4189
msgid "Fans check [on]"
msgstr ""
#: ultralcd.cpp:4192
msgid "Fans check [off]"
msgstr ""
#: messages.c:49
msgid "Fil. sensor [on]"
msgstr ""
#: ultralcd.cpp:4164
msgid "Fil. sensor [N/A]"
msgstr ""
#: messages.c:48
msgid "Fil. sensor [off]"
msgstr ""
#: ultralcd.cpp:7023
msgid "Filament sensor"
msgstr ""
#: ultralcd.cpp:7253
msgid "Filament sensor:"
msgstr ""
#: ultralcd.cpp:7396
msgid "File incomplete. Continue anyway?"
msgstr ""
#: ultralcd.cpp:7015
msgid "Front/left fans"
msgstr ""
#: Marlin_main.cpp:7222
msgid "Heating disabled by safety timer."
msgstr ""
#: messages.c:85
msgid "Checking sensors "
msgstr ""
#: messages.c:93
msgid "Is steel sheet on heatbed?"
msgstr ""
#: messages.c:91
msgid "Mode [Normal]"
msgstr ""
#: messages.c:92
msgid "Mode [Stealth]"
msgstr ""
#: messages.c:13
msgid "Mode [auto power]"
msgstr ""
#: ultralcd.cpp:1537
msgid "Nozzle FAN:"
msgstr ""
#: Marlin_main.cpp:1396
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
#: Marlin_main.cpp:6156
msgid "Please open idler and remove filament manually."
msgstr ""
#: messages.c:65
msgid "Please place steel sheet on heatbed."
msgstr ""
#: messages.c:69
msgid "Please press the knob to unload filament"
msgstr ""
#: messages.c:71
msgid "Please pull out filament immediately"
msgstr ""
#: messages.c:74
msgid "Please remove steel sheet from heatbed."
msgstr ""
#: Marlin_main.cpp:6015
msgid "Press knob to preheat nozzle and continue."
msgstr ""
#: ultralcd.cpp:1549
msgid "Print FAN: "
msgstr ""
#: ultralcd.cpp:7247
msgid "Print fan:"
msgstr ""
#: ultralcd.cpp:607
msgid "Printer disconnected"
msgstr ""
#: Marlin_main.cpp:8279
msgid "Recovering print "
msgstr ""
#: ultralcd.cpp:4227
msgid "RPi port [on]"
msgstr ""
#: ultralcd.cpp:4224
msgid "RPi port [off]"
msgstr ""
#: Marlin_main.cpp:1428
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
#: cardreader.cpp:754
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr ""
#: ultralcd.cpp:4250
msgid "Sort: [None]"
msgstr ""
#: ultralcd.cpp:4248
msgid "Sort: [Time]"
msgstr ""
#: ultralcd.cpp:4249
msgid "Sort: [Alphabet]"
msgstr ""
#: cardreader.cpp:761
msgid "Sorting files"
msgstr ""
#: Marlin_main.cpp:3536
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
#: ultralcd.cpp:7017
msgid "Swapped"
msgstr ""
#: ultralcd.cpp:3189
msgid "Temperature calibration failed"
msgstr ""
#: ultralcd.cpp:1846
msgid "Temperatures"
msgstr ""
#: ultralcd.cpp:1849
msgid "Voltages"
msgstr ""
#: ultralcd.cpp:2683
msgid "Waiting for PINDA probe cooling"
msgstr ""
#: Marlin_main.cpp:1388
msgid "Warning: both printer type and motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1380
msgid "Warning: motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1384
msgid "Warning: printer type changed."
msgstr ""
#: Marlin_main.cpp:946
msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
msgstr ""
#: Marlin_main.cpp:6155
msgid "Was filament unload successful?"
msgstr ""
#: Marlin_main.cpp:930
msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""
#: Marlin_main.cpp:931
msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""

324
lang/po/lang_es.po Normal file
View file

@ -0,0 +1,324 @@
# Translation into Spanish.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ultralcd.cpp:6304
msgid " [off"
msgstr ""
#: ultralcd.cpp:2362
msgid "[0;0] point offset"
msgstr ""
#: ultralcd.cpp:3613
msgid "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
msgstr ""
#: ultralcd.cpp:3626
msgid "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
msgstr ""
#: ultralcd.cpp:5796
msgid "AutoLoad filament"
msgstr ""
#: ultralcd.cpp:3642
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr ""
#: ultralcd.cpp:2089
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr ""
#: ultralcd.cpp:6999
msgid "Axis length"
msgstr ""
#: ultralcd.cpp:7001
msgid "Axis"
msgstr ""
#: ultralcd.cpp:1738
msgid "Belt status"
msgstr ""
#: messages.c:72
msgid "Blackout occurred. Recover print?"
msgstr ""
#: messages.c:28
msgid "Crash det. [on]"
msgstr ""
#: messages.c:26
msgid "Crash det. [N/A]"
msgstr ""
#: messages.c:27
msgid "Crash det. [off]"
msgstr ""
#: messages.c:25
msgid "Crash detected."
msgstr ""
#: ultralcd.cpp:1828
msgid "Date:"
msgstr ""
#: ultralcd.cpp:4213
msgid "E-correct"
msgstr ""
#: ultralcd.cpp:5835
msgid "Error - static memory has been overwritten"
msgstr ""
#: ultralcd.cpp:3656
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr ""
#: ultralcd.cpp:7236
msgid "Extruder fan:"
msgstr ""
#: ultralcd.cpp:1840
msgid "Extruder info"
msgstr ""
#: ultralcd.cpp:4178
msgid "F. autoload [on]"
msgstr ""
#: messages.c:47
msgid "F. autoload [N/A]"
msgstr ""
#: ultralcd.cpp:4181
msgid "F. autoload [off]"
msgstr ""
#: ultralcd.cpp:4189
msgid "Fans check [on]"
msgstr ""
#: ultralcd.cpp:4192
msgid "Fans check [off]"
msgstr ""
#: messages.c:49
msgid "Fil. sensor [on]"
msgstr ""
#: ultralcd.cpp:4164
msgid "Fil. sensor [N/A]"
msgstr ""
#: messages.c:48
msgid "Fil. sensor [off]"
msgstr ""
#: ultralcd.cpp:7015
msgid "Filament sensor"
msgstr ""
#: ultralcd.cpp:7245
msgid "Filament sensor:"
msgstr ""
#: ultralcd.cpp:7388
msgid "File incomplete. Continue anyway?"
msgstr ""
#: ultralcd.cpp:7007
msgid "Front/left fans"
msgstr ""
#: Marlin_main.cpp:7190
msgid "Heating disabled by safety timer."
msgstr ""
#: messages.c:85
msgid "Checking sensors "
msgstr ""
#: messages.c:93
msgid "Is steel sheet on heatbed?"
msgstr ""
#: ultralcd.cpp:2308
msgid "Left:"
msgstr ""
#: ultralcd.cpp:2335
msgid "Measured skew:"
msgstr ""
#: messages.c:91
msgid "Mode [Normal]"
msgstr ""
#: messages.c:92
msgid "Mode [Stealth]"
msgstr ""
#: messages.c:13
msgid "Mode [auto power]"
msgstr ""
#: ultralcd.cpp:1537
msgid "Nozzle FAN:"
msgstr ""
#: Marlin_main.cpp:1364
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
#: Marlin_main.cpp:6124
msgid "Please open idler and remove filament manually."
msgstr ""
#: messages.c:65
msgid "Please place steel sheet on heatbed."
msgstr ""
#: messages.c:69
msgid "Please press the knob to unload filament"
msgstr ""
#: messages.c:71
msgid "Please pull out filament immediately"
msgstr ""
#: messages.c:74
msgid "Please remove steel sheet from heatbed."
msgstr ""
#: Marlin_main.cpp:5983
msgid "Press knob to preheat nozzle and continue."
msgstr ""
#: ultralcd.cpp:1549
msgid "Print FAN: "
msgstr ""
#: ultralcd.cpp:7239
msgid "Print fan:"
msgstr ""
#: ultralcd.cpp:607
msgid "Printer disconnected"
msgstr ""
#: Marlin_main.cpp:8247
msgid "Recovering print "
msgstr ""
#: ultralcd.cpp:2309
msgid "Right:"
msgstr ""
#: ultralcd.cpp:4227
msgid "RPi port [on]"
msgstr ""
#: ultralcd.cpp:4224
msgid "RPi port [off]"
msgstr ""
#: Marlin_main.cpp:1396
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
#: ultralcd.cpp:2346
msgid "Severe skew:"
msgstr ""
#: ultralcd.cpp:2342
msgid "Slight skew:"
msgstr ""
#: cardreader.cpp:754
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr ""
#: ultralcd.cpp:4250
msgid "Sort: [None]"
msgstr ""
#: ultralcd.cpp:4248
msgid "Sort: [Time]"
msgstr ""
#: ultralcd.cpp:4249
msgid "Sort: [Alphabet]"
msgstr ""
#: cardreader.cpp:761
msgid "Sorting files"
msgstr ""
#: Marlin_main.cpp:3504
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
#: ultralcd.cpp:7009
msgid "Swapped"
msgstr ""
#: ultralcd.cpp:3189
msgid "Temperature calibration failed"
msgstr ""
#: ultralcd.cpp:1846
msgid "Temperatures"
msgstr ""
#: ultralcd.cpp:1849
msgid "Voltages"
msgstr ""
#: ultralcd.cpp:2683
msgid "Waiting for PINDA probe cooling"
msgstr ""
#: Marlin_main.cpp:1356
msgid "Warning: both printer type and motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1348
msgid "Warning: motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1352
msgid "Warning: printer type changed."
msgstr ""
#: Marlin_main.cpp:946
msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
msgstr ""
#: Marlin_main.cpp:6123
msgid "Was filament unload successful?"
msgstr ""
#: ultralcd.cpp:1839
msgid "XYZ cal. details"
msgstr ""
#: ultralcd.cpp:2306
msgid "Y distance from min:"
msgstr ""
#: Marlin_main.cpp:930
msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""
#: Marlin_main.cpp:931
msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""

304
lang/po/lang_it.po Normal file
View file

@ -0,0 +1,304 @@
# Translation into Italian.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ultralcd.cpp:6304
msgid " [off"
msgstr ""
#: ultralcd.cpp:6000
msgid " \002 Fact"
msgstr ""
#: ultralcd.cpp:5999
msgid " \002 Max"
msgstr ""
#: ultralcd.cpp:5998
msgid " \002 Min"
msgstr ""
#: ultralcd.cpp:2362
msgid "[0;0] point offset"
msgstr ""
#: ultralcd.cpp:3613
msgid "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
msgstr ""
#: ultralcd.cpp:3626
msgid "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
msgstr ""
#: ultralcd.cpp:5796
msgid "AutoLoad filament"
msgstr ""
#: ultralcd.cpp:3642
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr ""
#: ultralcd.cpp:2089
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr ""
#: ultralcd.cpp:6999
msgid "Axis length"
msgstr ""
#: ultralcd.cpp:7001
msgid "Axis"
msgstr ""
#: ultralcd.cpp:1738
msgid "Belt status"
msgstr ""
#: messages.c:72
msgid "Blackout occurred. Recover print?"
msgstr ""
#: messages.c:28
msgid "Crash det. [on]"
msgstr ""
#: messages.c:26
msgid "Crash det. [N/A]"
msgstr ""
#: messages.c:27
msgid "Crash det. [off]"
msgstr ""
#: messages.c:25
msgid "Crash detected."
msgstr ""
#: ultralcd.cpp:4213
msgid "E-correct"
msgstr ""
#: ultralcd.cpp:5835
msgid "Error - static memory has been overwritten"
msgstr ""
#: ultralcd.cpp:3656
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr ""
#: ultralcd.cpp:7236
msgid "Extruder fan:"
msgstr ""
#: ultralcd.cpp:1840
msgid "Extruder info"
msgstr ""
#: ultralcd.cpp:4178
msgid "F. autoload [on]"
msgstr ""
#: messages.c:47
msgid "F. autoload [N/A]"
msgstr ""
#: ultralcd.cpp:4181
msgid "F. autoload [off]"
msgstr ""
#: ultralcd.cpp:4189
msgid "Fans check [on]"
msgstr ""
#: ultralcd.cpp:4192
msgid "Fans check [off]"
msgstr ""
#: messages.c:49
msgid "Fil. sensor [on]"
msgstr ""
#: ultralcd.cpp:4164
msgid "Fil. sensor [N/A]"
msgstr ""
#: messages.c:48
msgid "Fil. sensor [off]"
msgstr ""
#: ultralcd.cpp:7015
msgid "Filament sensor"
msgstr ""
#: ultralcd.cpp:7245
msgid "Filament sensor:"
msgstr ""
#: ultralcd.cpp:7388
msgid "File incomplete. Continue anyway?"
msgstr ""
#: ultralcd.cpp:7007
msgid "Front/left fans"
msgstr ""
#: Marlin_main.cpp:7190
msgid "Heating disabled by safety timer."
msgstr ""
#: messages.c:85
msgid "Checking sensors "
msgstr ""
#: messages.c:93
msgid "Is steel sheet on heatbed?"
msgstr ""
#: messages.c:91
msgid "Mode [Normal]"
msgstr ""
#: messages.c:92
msgid "Mode [Stealth]"
msgstr ""
#: messages.c:13
msgid "Mode [auto power]"
msgstr ""
#: ultralcd.cpp:1537
msgid "Nozzle FAN:"
msgstr ""
#: Marlin_main.cpp:1364
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
#: Marlin_main.cpp:6124
msgid "Please open idler and remove filament manually."
msgstr ""
#: messages.c:65
msgid "Please place steel sheet on heatbed."
msgstr ""
#: messages.c:69
msgid "Please press the knob to unload filament"
msgstr ""
#: messages.c:71
msgid "Please pull out filament immediately"
msgstr ""
#: messages.c:74
msgid "Please remove steel sheet from heatbed."
msgstr ""
#: Marlin_main.cpp:5983
msgid "Press knob to preheat nozzle and continue."
msgstr ""
#: ultralcd.cpp:1549
msgid "Print FAN: "
msgstr ""
#: ultralcd.cpp:7239
msgid "Print fan:"
msgstr ""
#: ultralcd.cpp:607
msgid "Printer disconnected"
msgstr ""
#: Marlin_main.cpp:8247
msgid "Recovering print "
msgstr ""
#: ultralcd.cpp:4227
msgid "RPi port [on]"
msgstr ""
#: ultralcd.cpp:4224
msgid "RPi port [off]"
msgstr ""
#: Marlin_main.cpp:1396
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
#: cardreader.cpp:754
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr ""
#: ultralcd.cpp:4250
msgid "Sort: [None]"
msgstr ""
#: ultralcd.cpp:4248
msgid "Sort: [Time]"
msgstr ""
#: ultralcd.cpp:4249
msgid "Sort: [Alphabet]"
msgstr ""
#: cardreader.cpp:761
msgid "Sorting files"
msgstr ""
#: Marlin_main.cpp:3504
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
#: ultralcd.cpp:7009
msgid "Swapped"
msgstr ""
#: ultralcd.cpp:3189
msgid "Temperature calibration failed"
msgstr ""
#: ultralcd.cpp:1846
msgid "Temperatures"
msgstr ""
#: ultralcd.cpp:1849
msgid "Voltages"
msgstr ""
#: ultralcd.cpp:2683
msgid "Waiting for PINDA probe cooling"
msgstr ""
#: Marlin_main.cpp:1356
msgid "Warning: both printer type and motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1348
msgid "Warning: motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1352
msgid "Warning: printer type changed."
msgstr ""
#: Marlin_main.cpp:946
msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
msgstr ""
#: Marlin_main.cpp:6123
msgid "Was filament unload successful?"
msgstr ""
#: Marlin_main.cpp:930
msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""
#: Marlin_main.cpp:931
msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""

292
lang/po/lang_pl.po Normal file
View file

@ -0,0 +1,292 @@
# Translation into Polish.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ultralcd.cpp:6304
msgid " [off"
msgstr ""
#: ultralcd.cpp:2362
msgid "[0;0] point offset"
msgstr ""
#: ultralcd.cpp:3613
msgid "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
msgstr ""
#: ultralcd.cpp:3626
msgid "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
msgstr ""
#: ultralcd.cpp:5796
msgid "AutoLoad filament"
msgstr ""
#: ultralcd.cpp:3642
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr ""
#: ultralcd.cpp:2089
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr ""
#: ultralcd.cpp:6999
msgid "Axis length"
msgstr ""
#: ultralcd.cpp:7001
msgid "Axis"
msgstr ""
#: ultralcd.cpp:1738
msgid "Belt status"
msgstr ""
#: messages.c:72
msgid "Blackout occurred. Recover print?"
msgstr ""
#: messages.c:28
msgid "Crash det. [on]"
msgstr ""
#: messages.c:26
msgid "Crash det. [N/A]"
msgstr ""
#: messages.c:27
msgid "Crash det. [off]"
msgstr ""
#: messages.c:25
msgid "Crash detected."
msgstr ""
#: ultralcd.cpp:4213
msgid "E-correct"
msgstr ""
#: ultralcd.cpp:5835
msgid "Error - static memory has been overwritten"
msgstr ""
#: ultralcd.cpp:3656
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr ""
#: ultralcd.cpp:7236
msgid "Extruder fan:"
msgstr ""
#: ultralcd.cpp:1840
msgid "Extruder info"
msgstr ""
#: ultralcd.cpp:4178
msgid "F. autoload [on]"
msgstr ""
#: messages.c:47
msgid "F. autoload [N/A]"
msgstr ""
#: ultralcd.cpp:4181
msgid "F. autoload [off]"
msgstr ""
#: ultralcd.cpp:4189
msgid "Fans check [on]"
msgstr ""
#: ultralcd.cpp:4192
msgid "Fans check [off]"
msgstr ""
#: messages.c:49
msgid "Fil. sensor [on]"
msgstr ""
#: ultralcd.cpp:4164
msgid "Fil. sensor [N/A]"
msgstr ""
#: messages.c:48
msgid "Fil. sensor [off]"
msgstr ""
#: ultralcd.cpp:7015
msgid "Filament sensor"
msgstr ""
#: ultralcd.cpp:7245
msgid "Filament sensor:"
msgstr ""
#: ultralcd.cpp:7388
msgid "File incomplete. Continue anyway?"
msgstr ""
#: ultralcd.cpp:7007
msgid "Front/left fans"
msgstr ""
#: Marlin_main.cpp:7190
msgid "Heating disabled by safety timer."
msgstr ""
#: messages.c:85
msgid "Checking sensors "
msgstr ""
#: messages.c:93
msgid "Is steel sheet on heatbed?"
msgstr ""
#: messages.c:91
msgid "Mode [Normal]"
msgstr ""
#: messages.c:92
msgid "Mode [Stealth]"
msgstr ""
#: messages.c:13
msgid "Mode [auto power]"
msgstr ""
#: ultralcd.cpp:1537
msgid "Nozzle FAN:"
msgstr ""
#: Marlin_main.cpp:1364
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr ""
#: Marlin_main.cpp:6124
msgid "Please open idler and remove filament manually."
msgstr ""
#: messages.c:65
msgid "Please place steel sheet on heatbed."
msgstr ""
#: messages.c:69
msgid "Please press the knob to unload filament"
msgstr ""
#: messages.c:71
msgid "Please pull out filament immediately"
msgstr ""
#: messages.c:74
msgid "Please remove steel sheet from heatbed."
msgstr ""
#: Marlin_main.cpp:5983
msgid "Press knob to preheat nozzle and continue."
msgstr ""
#: ultralcd.cpp:1549
msgid "Print FAN: "
msgstr ""
#: ultralcd.cpp:7239
msgid "Print fan:"
msgstr ""
#: ultralcd.cpp:607
msgid "Printer disconnected"
msgstr ""
#: Marlin_main.cpp:8247
msgid "Recovering print "
msgstr ""
#: ultralcd.cpp:4227
msgid "RPi port [on]"
msgstr ""
#: ultralcd.cpp:4224
msgid "RPi port [off]"
msgstr ""
#: Marlin_main.cpp:1396
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
#: cardreader.cpp:754
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
msgstr ""
#: ultralcd.cpp:4250
msgid "Sort: [None]"
msgstr ""
#: ultralcd.cpp:4248
msgid "Sort: [Time]"
msgstr ""
#: ultralcd.cpp:4249
msgid "Sort: [Alphabet]"
msgstr ""
#: cardreader.cpp:761
msgid "Sorting files"
msgstr ""
#: Marlin_main.cpp:3504
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
#: ultralcd.cpp:7009
msgid "Swapped"
msgstr ""
#: ultralcd.cpp:3189
msgid "Temperature calibration failed"
msgstr ""
#: ultralcd.cpp:1846
msgid "Temperatures"
msgstr ""
#: ultralcd.cpp:1849
msgid "Voltages"
msgstr ""
#: ultralcd.cpp:2683
msgid "Waiting for PINDA probe cooling"
msgstr ""
#: Marlin_main.cpp:1356
msgid "Warning: both printer type and motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1348
msgid "Warning: motherboard type changed."
msgstr ""
#: Marlin_main.cpp:1352
msgid "Warning: printer type changed."
msgstr ""
#: Marlin_main.cpp:946
msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
msgstr ""
#: Marlin_main.cpp:6123
msgid "Was filament unload successful?"
msgstr ""
#: Marlin_main.cpp:930
msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""
#: Marlin_main.cpp:931
msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
msgstr ""

61
lang/po/make_po.sh Normal file
View file

@ -0,0 +1,61 @@
#!/bin/sh
#
# make_po.sh - multi-language support script
# for generating lang_xx.po
#
SRCDIR="../../Firmware"
#
LANG=$1
if [ -z "$LANG" ]; then LANG=cz; fi
#
echo "make_po.sh started" >&2
#remove output file if exists
if [ -e lang_$LANG.po ]; then rm lang_$LANG.po; fi
langname=$(\
case "$LANG" in
*en*) echo "English" ;;
*cz*) echo "Czech" ;;
*de*) echo "German" ;;
*it*) echo "Italian" ;;
*es*) echo "Spanish" ;;
*pl*) echo "Polish" ;;
esac)
#write po header
echo "# Translation into $langname." > lang_$LANG.po
echo "#" >> lang_$LANG.po
echo 'msgid ""' >> lang_$LANG.po
echo 'msgstr ""' >> lang_$LANG.po
echo '"MIME-Version: 1.0\n"' >> lang_$LANG.po
echo '"Content-Type: text/plain; charset=UTF-8\n"' >> lang_$LANG.po
echo '"Content-Transfer-Encoding: 8bit\n"' >> lang_$LANG.po
echo >> lang_$LANG.po
#list .cpp, .c and .h files
files=$(ls "$SRCDIR"/*.cpp "$SRCDIR"/*.c "$SRCDIR"/*.h)
#loop over all messages, print only untranslated (=="\x00")
s0=''
s1=''
s2=''
cat ../lang_en_$LANG.txt | sed "s/\\\\/\\\\\\\\/g;s/^#/#: /" | while read -r s; do
if [ "$s" == "" ]; then
if [ "$s0" == "\"\\\\x00\"" ]; then
search=$(echo -e "$s1")
found=$(grep -m1 -n -F "$search" $files | head -n1 | cut -f1-2 -d':' | sed "s/^.*\///")
echo "#: $found"
echo -e "msgid $s1"
echo 'msgstr ""'
echo
fi
fi
s2=$s1
s1=$s0
s0=$s
done >> lang_$LANG.po
echo "make_po.sh finished" >&2
exit 0

116
lang/postbuild.sh Normal file
View file

@ -0,0 +1,116 @@
#!/bin/sh
# postbuild.sh - multi-language support high-level script
# for generating binary with secondary language
#
# Input files:
# $OUTDIR/Firmware.ino.elf
# $OUTDIR/sketch/*.o (all object files)
#
# Output files:
# text.sym
# $PROGMEM.sym (progmem1.sym)
# $PROGMEM.lss (...)
# $PROGMEM.hex
# $PROGMEM.chr
# $PROGMEM.var
# $PROGMEM.txt
# textaddr.txt
#
# Output folder and elf file:
OUTDIR="../../output"
OUTELF="$OUTDIR/Firmware.ino.elf"
#
# AVR gcc tools used:
OBJCOPY=C:/arduino-1.6.8/hardware/tools/avr/bin/avr-objcopy.exe
#
# Selected language:
LANG=$1
#if [ -z "$LANG" ]; then LANG='cz'; fi
#
# Params:
IGNORE_MISSING_TEXT=1
function finish
{
echo
if [ "$1" == "0" ]; then
echo "postbuild.sh finished with success" >&2
else
echo "postbuild.sh finished with errors!" >&2
fi
case "$-" in
*i*) echo "press enter key"; read ;;
esac
exit $1
}
echo "postbuild.sh started" >&2
#check input files
echo " checking files:" >&2
if [ ! -e $OUTDIR ]; then echo " folder '$OUTDIR' not found!" >&2; finish 1; fi
echo " folder OK" >&2
if [ ! -e $OUTELF ]; then echo " elf file '$OUTELF' not found!" >&2; finish 1; fi
echo " elf OK" >&2
if ! ls $OUTDIR/sketch/*.o >/dev/null 2>&1; then echo " no object files in '$OUTDIR/sketch/'!" >&2; finish 1; fi
echo " objects OK" >&2
#run progmem.sh - examine content of progmem1
echo -n " running progmem.sh..." >&2
./progmem.sh 1 2>progmem.out
if [ $? -ne 0 ]; then echo "NG! - check progmem.out file" >&2; finish 1; fi
echo "OK" >&2
#run textaddr.sh - map progmem addreses to text identifiers
echo -n " running textaddr.sh..." >&2
./textaddr.sh 2>textaddr.out
if [ $? -ne 0 ]; then echo "NG! - check progmem.out file" >&2; finish 1; fi
echo "OK" >&2
#check for messages declared in progmem1, but not found in lang_en.txt
echo -n " checking textaddr.txt..." >&2
if cat textaddr.txt | grep "^ADDR NF" >/dev/null; then
echo "NG! - some texts not found in lang_en.txt!"
if [ $(("0$IGNORE_MISSING_TEXT")) -eq 0 ]; then
finish 1
else
echo " missing text ignored!" >&2
fi
else
echo "OK" >&2
fi
#update progmem1 id entries in binary file
echo -n " extracting binary..." >&2
$OBJCOPY -I ihex -O binary $OUTDIR/Firmware.ino.hex ./firmware.bin
echo "OK" >&2
#update binary file
echo " updating binary:" >&2
#update progmem1 id entries in binary file
echo -n " primary language ids..." >&2
cat textaddr.txt | grep "^ADDR OK" | cut -f3- -d' ' | sed "s/^0000/0x/" |\
awk '{ id = $2 - 1; hi = int(id / 256); lo = int(id - 256 * hi); printf("%d \\\\x%02x\\\\x%02x\n", strtonum($1), lo, hi); }' |\
while read addr data; do
echo -n -e $data | dd of=./firmware.bin bs=1 count=2 seek=$addr conv=notrunc oflag=nonblock 2>/dev/null
done
echo "OK" >&2
#update _SEC_LANG in binary file if language is selected
echo -n " secondary language data..." >&2
if [ ! -z "$LANG" ]; then
./update_lang.sh $LANG 2>./update_lang.out
if [ $? -ne 0 ]; then echo "NG! - check update_lang.out file" >&2; finish 1; fi
echo "OK" >&2
finish 0
else
echo "skipped" >&2
fi
#convert bin to hex
echo -n " converting to hex..." >&2
$OBJCOPY -I binary -O ihex ./firmware.bin ./firmware.hex
echo "OK" >&2
finish 0

127
lang/progmem.sh Normal file
View file

@ -0,0 +1,127 @@
#!/bin/sh
# progmem.sh - multi-language support low-level script
# for examining content of progmem sections (default is progmem1)
#
# Input files:
# $OUTDIR/Firmware.ino.elf
# $OUTDIR/sketch/*.o (all object files)
#
# Output files:
# text.sym
# $PROGMEM.sym
# $PROGMEM.lss
# $PROGMEM.hex
# $PROGMEM.chr
# $PROGMEM.var
# $PROGMEM.txt
#
# Program memory used
PROGMEM=progmem$1
if [ -z "$1" ]; then PROGMEM=progmem1; fi
#
# Output folder and elf file:
OUTDIR="../../output"
OUTELF="$OUTDIR/Firmware.ino.elf"
#
# AVR gcc tools used:
OBJDUMP=C:/arduino-1.6.8/hardware/tools/avr/bin/avr-objdump.exe
#
#
# Description of process:
# 0. check input files
# 1. remove output files
# 2. list symbol table of section '.text' from output elf file to text.sym (sorted by address)
# 3. list symbol table of section '.$PROGMEM' from all output object files to $PROGMEM.sym
# 4. filter only $PROGMEM symbols from text.sym and store it back to $PROGMEM.sym with absolute address
# 5. calculate start and stop address of section '.$PROGMEM'
# 6. extract string data from elf file to $PROGMEM.hex
# 7. prepare string data for character check and conversion (output to $PROGMEM.chr)
# 8. perform character check and conversion (output to $PROGMEM.var and $PROGMEM.txt)
#
echo "progmem.sh started" >&2
# (0)
echo " progmem.sh (0) - checking input files" >&2
if [ ! -e $OUTDIR ]; then echo "progmem.sh - file '$OUTELF' not found!" >&2; exit 1; fi
# (1)
echo " progmem.sh (1) - removing output files" >&2
#remove output files if exists
if [ -e text.sym ]; then rm text.sym; fi
if [ -e $PROGMEM.sym ]; then rm $PROGMEM.sym; fi
if [ -e $PROGMEM.lss ]; then rm $PROGMEM.lss; fi
if [ -e $PROGMEM.hex ]; then rm $PROGMEM.hex; fi
if [ -e $PROGMEM.chr ]; then rm $PROGMEM.chr; fi
if [ -e $PROGMEM.var ]; then rm $PROGMEM.var; fi
if [ -e $PROGMEM.txt ]; then rm $PROGMEM.txt; fi
# (2)
echo " progmem.sh (2) - listing symbol table of section '.text'" >&2
#list symbols from section '.text' into file text.sym (only address, size and name)
$OBJDUMP -t -j ".text" $OUTELF | tail -n +5 | grep -E "^[0-9a-f]{8} [gl] O" | cut -c1-9,28-36,37- | sed "/^$/d" | sort >> text.sym
# (3)
echo " progmem.sh (3) - listing symbol table of section '.$PROGMEM'" >&2
#loop over all object files
ls "$OUTDIR"/sketch/*.o | while read fn; do
echo " processing $fn" >&2
#list symbols from section $PROGMEM (only address, size and name)
$OBJDUMP -t -j ".$PROGMEM" $fn 2>/dev/null | tail -n +5 | cut -c1-9,28-36,37- | sed "/^$/d" | sort >> $PROGMEM.sym
done
# (4)
echo " progmem.sh (4) - filtering $PROGMEM symbols" >&2
#create list of $PROGMEM symbol names separated by '\|'
progmem=$(cut -c19- $PROGMEM.sym)
progmem=$(echo $progmem | sed "s/ /\\\b\\\|\\\b/g")
progmem='\b'$progmem'\b'
#filter $PROGMEM symbols from section '.text' (result file will contain list sorted by absolute address)
cat text.sym | grep $progmem > $PROGMEM.sym
# (5)
echo " progmem.sh (5) - calculating start and stop address" >&2
#calculate start addres of section ".$PROGMEM"
PROGMEM_BEG=$(head -n1 $PROGMEM.sym | while read offs size name; do echo "0x"$offs; done)
#calculate stop addres of section ".$PROGMEM"
PROGMEM_END=$(tail -n1 $PROGMEM.sym | while read offs size name; do printf "0x%x" $(("0x"$offs + "0x"$size)); done)
echo " START address = "$PROGMEM_BEG >&2
echo " STOP address = "$PROGMEM_END >&2
# (6)
echo " progmem.sh (6) - extracting string data from elf" >&2
#dump $PROGMEM data in hex format, cut textual data (keep hex data only)
$OBJDUMP -d -j ".text" -w -z --start-address=$PROGMEM_BEG --stop-address=$PROGMEM_END $OUTELF | cut -c1-57 > $PROGMEM.lss
#convert $PROGMEM.lss to $PROGMEM.hex:
# replace empty lines with '|' (variables separated by empty lines)
# remove address from multiline variables (keep address at first variable line only)
# remove '<' and '>:', remove whitespace at end of lines
# remove line-endings, replace separator with '\n' (join hex data lines - each line will contain single variable)
# filter progmem symbols
cat $PROGMEM.lss | tail -n +7 | sed -E 's/^$/|/;s/^........:\t/ /;s/<//g;s/>:/ /g;s/[ \t]*$//' |\
tr -d '\n' | sed "s/[|]/\n/g" | grep $progmem > $PROGMEM.hex
# (7)
echo " progmem.sh (7) - preparing string data" >&2
#convert $PROGMEM.hex to $PROGMEM.chr (prepare string data for character check and conversion)
# replace first space with tab
# replace second space with tab and space
# replace all remaining spaces with '\x'
# replace all tabs with spaces
cat $PROGMEM.hex | sed 's/ /\t/;s/ /\t /;s/ /\\x/g;s/\t/ /g' > $PROGMEM.chr
# (8)
#convert $PROGMEM.chr to $PROGMEM.var (convert data to text)
echo " progmem.sh (8) - converting string data" >&2
cat $PROGMEM.chr | \
sed 's/ \\xff\\xff/ /;' | \
sed 's/\\x22/\\\\\\x22/g;' | \
sed 's/\\x1b/\\\\\\x1b/g;' | \
sed 's/\\x01/\\\\\\x01/g;' | \
sed 's/\\xf8/\\\\\\xf8/g;' | \
sed 's/\\x00$/\\x0a/;s/^/printf "/;s/$/"/' | sh > $PROGMEM.var
cat $PROGMEM.var | sed 's/\r/\n/g' |sed -E 's/^[0-9a-f]{8} [^ ]* //' >$PROGMEM.txt
echo "progmem.sh finished" >&2
exit 0

48
lang/readme.txt Normal file
View file

@ -0,0 +1,48 @@
Nova podpora vice jazyku ve firmware
Zmeny oproti stavajicimu frameworku:
1. Deklarace lokalizovanych textu primo v kodu, neni nutne udrzovat tabulky.
2. Zatim dvoj jazycna verze (en_cz, en_de atd). Moznost rozsirit na vicejazycnou (en_cz_de - pro MK2).
3. Moznost vyberu druheho jazyka ulozeneho v SPI flash (nebude zabirat misto v interni flash, pouze MK3).
5. Bash postbuild proces namisto perloveho skriptu + nastroje na spravu slovniku.
Popis:
Novy framework je trochu podobny jako znamy i18n20, ale sity na miru pro AVR atmega s ohledem na maximalni jednoduchost a usporu interni flashe.
Stringy ktere maji byt prelozene se deklaruji pomoci specialnich maker, zbytek obstara postbuild.
Vsechny lokalizovane texty se nachazi ve specialni sekci, v pripade AVR musi byt stringy umisteny v dolnich 64kB flash - tzv 'progmem'.
Po zbuildovani arduinem bude fungovat pouze anglictina, je treba spustit postbuild ktery na zaklade slovniku doplni data sekundarniho jazka a vytvori modifikovany hexfile.
Jedina data ktera je treba udrzovat jsou slovniky pro preklad. Jsou to textove soubory kde je vzdy sparovan anglicky text s prelozenym textem.
Kazdy text ve slovniku je jeden radek, muze obsahovat specialni znaky v hexadecimalni podobe (e.g. '\x0a'). Nasledujici radek je vzdy prelozeny text.
Tento jednoduchy format je zvolen proto aby bylo mozno slovniky a proces prekladu spravovat jen pomoci gitu a nekolika skriptu.
Pokud pridame nebo zmenime nejaky text v kodu, zmeni se po zbuildovani a spusteni nastroje 'update.sh' soubor lang_en_code.txt.
To je generovany soubor ktery obsahuje vsechny lokalizovane texty pouzite v kodu setridene podle abecedy.
V gitu uvidime zmenu kterou rucne preneseme do slovniku lang_en_xx.txt, zaroven vytvorime pozadavek na preklad ci korekturu pozadovaneho textu.
Pokud pridame nebo zmenime nejaky text ve slovnikach, zmeni se po spusteni nastroje 'update.sh' soubor lang_en_dict.txt.
Ten obsahuje vsechny lokalizovane texty ze slovniku (v anglictine), respektive mnozinu jejich sjednoceni.
V idealnim pripade by soubory lang_en_code.txt a lang_en_dict.txt mely byt totozne.
Pokud se zmeni slovnik, je treba znovu vygenerovat binarni soubory lang_en_xx.bin.
Pouziti v kodu, priklady:
1. deklarace lokalizovaneho textu v kodu - makro '_i':
puts_P(_i("Kill all humans!")); //v cz vypise "Zabit vsechny lidi!"
2. deklarace lokalizovaneho textu jako globalni konstanty - makro 'PROGMEM_I1' a 'ISTR':
const char MSG_PREHEAT[] PROGMEM_I1 = ISTR("Preheat"); //deklarace
puts_P(get_translation(MSG_PREHEAT)); //v cz vypise "Predehrev"
3. fukce get_translation - zkratka makro '_T':
puts_P(_T(MSG_PREHEAT)); //v cz vypise "Predehrev"
4. deklarace lokalizovaneho textu jako lokalni promenne - makro '_I':
const char* text = preheat?_I("Preheat"):_I("Cooldown");
puts_P(_T(text)); //v cz vypise "Predehrev" nebo "Zchlazeni"
5. deklarace nelokalizovaneho textu - makro 'PROGMEM_N1' a '_n' nebo '_N':
const char MSG_MK3[] PROGMEM_N1 = "MK3"; //deklarace
const char* text = _n("MK3");
nebo
const char* text = _N("MK3");

68
lang/textaddr.sh Normal file
View file

@ -0,0 +1,68 @@
#!/bin/sh
# textaddr.sh - multi-language support low level script
# for compiling progmem1.var and lang_en.txt files
# to textaddr.txt file (mapping of progmem addreses to text idenifiers)
#
# Input files:
# progmem1.var
# lang_en.txt
#
# Output files:
# textaddr.txt
#
#
# Dscription of process:
# check if input files exists
# create sorted list of strings from progmem1.var and lang_en.txt
# lines from progmem1.var will contain addres (8 chars) and english text
# lines from lang_en.txt will contain linenumber and english text
# after sort this will generate pairs of lines (line from progmem1 first)
# result of sort is compiled with simple script and stored into file textaddr.txt
#
echo "textaddr.sh started" >&2
if [ ! -e progmem1.var ]; then echo 'textaddr.sh - file progmem1.var not found!' >&2; exit 1; fi
if [ ! -e lang_en.txt ]; then echo 'textaddr.sh - file lang_en.txt not found!' >&2; exit 1; fi
addr=''
text=''
(cat progmem1.var | sed -E "s/^([^ ]*) ([^ ]*) (.*)/\1 \"\3\"/";\
cat lang_en.txt | sed "/^$/d;/^#/d" | sed = | sed '{N;s/\n/ /}') |\
sort -k2 |\
sed "s/\\\/\\\\\\\/g" | while read num txt; do
if [ ${#num} -eq 8 ]; then
if [ -z "$addr" ]; then
addr=$num
else
if [ "$text" == "$txt" ]; then
addr="$addr $num"
else
echo "ADDR NF $addr $text"
addr=$num
fi
fi
text=$txt
else
if [ -z "$addr" ]; then
echo "TEXT NF $num $txt"
else
if [ "$text" == "$txt" ]; then
if [ ${#addr} -eq 8 ]; then
echo "ADDR OK $addr $num"
else
echo "$addr" | sed "s/ /\n/g" | while read ad; do
echo "ADDR OK $ad $num"
done
fi
addr=''
text=''
else
echo "TEXT NF $num $txt"
fi
fi
fi
done > textaddr.txt
echo "textaddr.sh finished" >&2
exit 0

68
lang/update_lang.sh Normal file
View file

@ -0,0 +1,68 @@
#!/bin/sh
# update_lang.sh - multi-language support low level script
# for updating secondary language in binary file
#
# AVR gcc tools used:
OBJCOPY=C:/arduino-1.6.8/hardware/tools/avr/bin/avr-objcopy.exe
#
# Selected language:
LANG=$1
if [ -z "$LANG" ]; then LANG='cz'; fi
#
function finish
{
echo
if [ "$1" == "0" ]; then
echo "update_lang.sh finished with success" >&2
else
echo "update_lang.sh finished with errors!" >&2
fi
case "$-" in
*i*) echo "press enter key"; read ;;
esac
exit $1
}
echo "update_lang.sh started" >&2
echo "selected language=$LANG" >&2
echo -n " checking files..." >&2
if [ ! -e text.sym ]; then echo "NG! file text.sym not found!" >&2; finish 1; fi
if [ ! -e lang_$LANG.bin ]; then echo "NG! file lang_$LANG.bin not found!" >&2; finish 1; fi
if [ ! -e firmware.bin ]; then echo "NG! file firmware.bin not found!" >&2; finish 1; fi
echo "OK" >&2
echo -n " checking symbols..." >&2
#find symbol _SEC_LANG in section '.text'
sec_lang=$(cat text.sym | grep -E "\b_SEC_LANG\b")
if [ -z "$sec_lang" ]; then echo "NG!\n symbol _SEC_LANG not found!" >&2; finish 1; fi
echo "OK" >&2
echo " calculating vars:" >&2
#get addres and size
sec_lang_addr='0x'$(echo $sec_lang | cut -f1 -d' ')
sec_lang_size='0x'$(echo $sec_lang | cut -f2 -d' ')
echo " sec_lang_addr =$sec_lang_addr" >&2
echo " sec_lang_size =$sec_lang_size" >&2
#calculate lang_table_addr (aligned to 256byte page)
lang_table_addr=$((256*$((($sec_lang_addr + 255) / 256))))
printf " lang_table_addr =0x%04x\n" $lang_table_addr >&2
#calculate lang_table_size
lang_table_size=$((256*$((($sec_lang_size - ($lang_table_addr - $sec_lang_addr))/256))))
printf " lang_table_size =0x%04x (=%d bytes)\n" $lang_table_size $lang_table_size >&2
#get lang_xx.bin file size
lang_file_size=$(wc -c lang_$LANG.bin | cut -f1 -d' ')
printf " lang_file_size =0x%04x (=%d bytes)\n" $lang_file_size $lang_file_size >&2
if [ $lang_file_size -gt $lang_table_size ]; then echo "Lanaguage binary file size too big!"; finish 1; fi
echo "updating 'firmware.bin'..." >&2
dd if=lang_$LANG.bin of=firmware.bin bs=1 seek=$lang_table_addr conv=notrunc 2>/dev/null
#convert bin to hex
echo "converting to hex..." >&2
$OBJCOPY -I binary -O ihex ./firmware.bin ./firmware.hex
finish 0

0
Firmware/langtool.php → lang_backup/langtool.php
View file

0
Firmware/langtool.pl → lang_backup/langtool.pl Executable file → Normal file
View file

34
lang_backup/language.h Normal file
View file

@ -0,0 +1,34 @@
#ifndef LANGUAGE_H
#define LANGUAGE_H
#define PROTOCOL_VERSION "1.0"
#ifdef CUSTOM_MENDEL_NAME
// #define CUSTOM_MENDEL_NAME CUSTOM_MENDEL_NAME
#else
#define MACHINE_NAME "Mendel"
#endif
#define _i PSTR
#define _n PSTR
#ifndef MACHINE_UUID
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
#endif
#define MSG_FW_VERSION "Firmware"
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
// Common serial messages
#define MSG_MARLIN "Marlin"
// Serial Console Messages (do not translate those!)
// LCD Menu Messages
#include "language_all.h"
#endif //__LANGUAGE_H

11
Firmware/language_all.cpp → lang_backup/language_all.cpp
View file

@ -1168,6 +1168,11 @@ const char * const MSG_MAX_LANG_TABLE[1] PROGMEM = {
MSG_MAX_EN
};
const char MSG_MEASURED_OFFSET_EN[] PROGMEM = "[0;0] point offset";
const char * const MSG_MEASURED_OFFSET_LANG_TABLE[1] PROGMEM = {
MSG_MEASURED_OFFSET_EN
};
const char MSG_MEASURED_SKEW_EN[] PROGMEM = "Measured skew:";
const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
@ -2221,10 +2226,8 @@ const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
};
const char MSG_TEMP_CAL_FAILED_EN[] PROGMEM = "Temperature calibration failed";
const char MSG_TEMP_CAL_FAILED_CZ[] PROGMEM = "Teplotni kalibrace selhala";
const char * const MSG_TEMP_CAL_FAILED_LANG_TABLE[LANG_NUM] PROGMEM = {
MSG_TEMP_CAL_FAILED_EN,
MSG_TEMP_CAL_FAILED_CZ
const char * const MSG_TEMP_CAL_FAILED_LANG_TABLE[1] PROGMEM = {
MSG_TEMP_CAL_FAILED_EN
};
const char MSG_TEMP_CAL_WARNING_EN[] PROGMEM = "Stable ambient temperature 21-26C is needed a rigid stand is required.";

6
Firmware/language_all.h → lang_backup/language_all.h
View file

@ -394,6 +394,8 @@ extern const char* const MSG_MARK_FIL_LANG_TABLE[LANG_NUM];
#define MSG_MARK_FIL LANG_TABLE_SELECT(MSG_MARK_FIL_LANG_TABLE)
extern const char* const MSG_MAX_LANG_TABLE[1];
#define MSG_MAX LANG_TABLE_SELECT_EXPLICIT(MSG_MAX_LANG_TABLE, 0)
extern const char* const MSG_MEASURED_OFFSET_LANG_TABLE[1];
#define MSG_MEASURED_OFFSET LANG_TABLE_SELECT_EXPLICIT(MSG_MEASURED_OFFSET_LANG_TABLE, 0)
extern const char* const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM];
#define MSG_MEASURED_SKEW LANG_TABLE_SELECT(MSG_MEASURED_SKEW_LANG_TABLE)
extern const char* const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM];
@ -726,8 +728,8 @@ extern const char* const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM];
#define MSG_TEMP_CALIBRATION_OFF LANG_TABLE_SELECT(MSG_TEMP_CALIBRATION_OFF_LANG_TABLE)
extern const char* const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM];
#define MSG_TEMP_CALIBRATION_ON LANG_TABLE_SELECT(MSG_TEMP_CALIBRATION_ON_LANG_TABLE)
extern const char* const MSG_TEMP_CAL_FAILED_LANG_TABLE[LANG_NUM];
#define MSG_TEMP_CAL_FAILED LANG_TABLE_SELECT(MSG_TEMP_CAL_FAILED_LANG_TABLE)
extern const char* const MSG_TEMP_CAL_FAILED_LANG_TABLE[1];
#define MSG_TEMP_CAL_FAILED LANG_TABLE_SELECT_EXPLICIT(MSG_TEMP_CAL_FAILED_LANG_TABLE, 0)
extern const char* const MSG_TEMP_CAL_WARNING_LANG_TABLE[1];
#define MSG_TEMP_CAL_WARNING LANG_TABLE_SELECT_EXPLICIT(MSG_TEMP_CAL_WARNING_LANG_TABLE, 0)
extern const char* const MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_LANG_TABLE[1];

0
Firmware/language_common.h → lang_backup/language_common.h
View file

1
Firmware/language_cz.h → lang_backup/language_cz.h
View file

@ -415,4 +415,3 @@
#define MSG_CHANGED_PRINTER "Varovani: doslo ke zmene typu tiskarny."
#define MSG_CHANGED_BOTH "Varovani: doslo ke zmene typu tiskarny a motherboardu."
#define MSG_WAITING_TEMP_PINDA "Cekani na zchladnuti PINDA"
#define MSG_TEMP_CAL_FAILED "Teplotni kalibrace selhala"

2
Firmware/language_de.h → lang_backup/language_de.h
View file

@ -260,7 +260,7 @@
+ #define(length = 20, lines = 3) MSG_WAITING_TEMP "Warten auf Abkuehlung von Heater und Bett."
+ #define(length = 20, lines = 2) MSG_FILAMENT_CLEAN "Ist Farbe rein?"
+ #define(lenght = 20, lines = 1) MSG_UNLOADING_FILAMENT "Filament auswerfen"
+ #define(length = 20, lines = 1) MSG_UNLOADING_FILAMENT "Filament auswerfen"
+ #define(length = 20, lines = 8) MSG_PAPER "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten"
+
+#define MSG_BED_CORRECTION_MENU "Bett level Korrekt"

1
Firmware/language_en.h → lang_backup/language_en.h
View file

@ -219,6 +219,7 @@
#define(length=17,lines=1) MSG_SHOW_END_STOPS "Show end stops"
#define MSG_CALIBRATE_BED "Calibrate XYZ"
#define MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
#define MSG_MEASURED_OFFSET "[0;0] point offset"
#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
#define(length=20,lines=8) MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."

0
Firmware/language_es.h → lang_backup/language_es.h
View file

0
Firmware/language_it.h → lang_backup/language_it.h
View file

0
Firmware/language_pl.h → lang_backup/language_pl.h
View file

20
lang_upgrade/!upgrade.sh Normal file
View file

@ -0,0 +1,20 @@
#!/bin/sh
# upgrade.sh
#
if [ -e ../lang_backup ]; then
echo 'folder ../lang_backup already exist!'
else
./clean.sh
./make_msgs.sh
./find_msgs.sh
./make_source.sh
echo 'backup old files...'
mkdir ../lang_backup
mv ../Firmware/langtool.* ../lang_backup/
mv ../Firmware/language*.* ../lang_backup/
echo 'copying new files...'
cp ./source/* ../Firmware/
echo 'finished'
fi
read

11
lang_upgrade/clean.sh Normal file
View file

@ -0,0 +1,11 @@
#!/bin/sh
#
echo "removing output files"
rm msgs*.txt
rm make_msgs.out
rm replace_*.out
rm ./source/*
rmdir ./source
echo "step0 finished... press key"
read

47
lang_upgrade/find_msgs.sh Normal file
View file

@ -0,0 +1,47 @@
#!/bin/sh
#
echo 'find_msgs.sh'
#list all source files from source folder except *language* files
files=$(ls ../Firmware/*.c* | grep -v 'language'; ls ../Firmware/*.h | grep -v 'language'; )
echo ' processing msgs_en.txt and msgs_common.txt...'
#msgs=$(cat msgs_en.txt | cut -f 1 -d' ')
msgs=$(cat msgs_en.txt msgs_common.txt | cut -f 1 -d' ')
#msgs=$(cat msgs_common.txt | cut -f 1 -d' ')
echo "$msgs" | while read msg; do
echo -n "$msg "
found=$(grep -c -E "\b$msg\b" $files | sed "/:0$/d;s/.*:/+/g")
echo $(("0"$found))
done | tee msgs_usage.txt_0
cat msgs_usage.txt_0 | sort -k2 -n >msgs_usage.txt
rm msgs_usage.txt_0
#list messages that are not used
msgs=$(cat msgs_usage.txt | grep " 0$" | cut -f1 -d' ')
#make regular expression from the list - replace spaces with '\b|\b' (match whole words)
msgs='\b'$(echo $msgs | sed "s/ /\\\b\\\|\\\b/g")'\b'
#grep unused messages
cat msgs_en.txt | grep "$msgs" > msgs_en_unused.txt
cat msgs_common.txt | grep "$msgs" > msgs_common_unused.txt
#list messages used once
msgs=$(cat msgs_usage.txt | grep " 1$" | cut -f1 -d' ')
#make regular expression from the list - replace spaces with '\b|\b' (match whole words)
msgs='\b'$(echo $msgs | sed "s/ /\\\b\\\|\\\b/g")'\b'
#grep unused messages
cat msgs_en.txt | grep "$msgs" > msgs_en_used_once.txt
cat msgs_common.txt | grep "$msgs" > msgs_common_used_once.txt
#list messages used once more (exclude unused and used once)
msgs=$(cat msgs_usage.txt | grep -v " 0$" | grep -v " 1$" | cut -f1 -d' ')
#make regular expression from the list - replace spaces with '\b|\b' (match whole words)
msgs='\b'$(echo $msgs | sed "s/ /\\\b\\\|\\\b/g")'\b'
#grep unused messages
cat msgs_en.txt | grep "$msgs" > msgs_en_used_more.txt
cat msgs_common.txt | grep "$msgs" > msgs_common_used_more.txt
echo "step2 finished... press key"
read
exit

96
lang_upgrade/fix_1.out Normal file
View file

@ -0,0 +1,96 @@
MSG_ALL OK
MSG_AUTO_HOME OK
MSG_AUTO_MODE_ON OK
MSG_BABYSTEP_Z OK
MSG_BABYSTEP_Z_NOT_SET OK
MSG_BED OK
MSG_BED_DONE OK
MSG_BED_HEATING OK
MSG_BED_LEVELING_FAILED_POINT_LOW OK
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED OK
MSG_CALIBRATE_Z_AUTO OK
MSG_CARD_MENU OK
MSG_CONFIRM_NOZZLE_CLEAN OK
MSG_COOLDOWN OK
MSG_CRASH_DETECTED OK
MSG_CRASHDETECT_NA OK
MSG_CRASHDETECT_OFF OK
MSG_CRASHDETECT_ON OK
MSG_ENDSTOP_HIT OK
MSG_ENDSTOP_OPEN OK
MSG_ENDSTOPS_HIT OK
MSG_Enqueing OK
MSG_ERR_STOPPED OK
MSG_ERROR OK
MSG_EXTRUDER OK
MSG_FAN_SPEED OK
MSG_FILAMENT_CLEAN OK
MSG_FILAMENT_LOADING_T0 OK
MSG_FILAMENT_LOADING_T1 OK
MSG_FILAMENT_LOADING_T2 OK
MSG_FILAMENT_LOADING_T3 OK
MSG_FILAMENTCHANGE OK
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 OK
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 OK
MSG_FINISHING_MOVEMENTS OK
MSG_FOLLOW_CALIBRATION_FLOW OK
MSG_FSENS_AUTOLOAD_NA OK
MSG_FSENSOR_OFF OK
MSG_FSENSOR_ON OK
MSG_HEATING OK
MSG_HEATING_COMPLETE OK
MSG_HOMEYZ OK
MSG_CHOOSE_EXTRUDER OK
MSG_LOAD_FILAMENT OK
MSG_LOADING_FILAMENT OK
MSG_M117_V2_CALIBRATION OK
MSG_MAIN OK
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 OK
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 OK
MSG_MENU_CALIBRATION OK
MSG_NO OK
MSG_NOZZLE OK
MSG_OK OK
MSG_PAPER OK
MSG_PLACE_STEEL_SHEET OK
MSG_PLEASE_WAIT OK
MSG_POWERUP OK
MSG_PREHEAT_NOZZLE OK
MSG_PRESS_TO_UNLOAD OK
MSG_PRINT_ABORTED OK
MSG_PULL_OUT_FILAMENT OK
MSG_RECOVER_PRINT OK
MSG_REFRESH OK
MSG_REMOVE_STEEL_SHEET OK
MSG_SD_ERR_WRITE_TO_FILE OK
MSG_SD_OPEN_FILE_FAIL OK
MSG_SD_WORKDIR_FAIL OK
MSG_SELFTEST_COOLING_FAN OK
MSG_SELFTEST_EXTRUDER_FAN OK
MSG_SELFTEST_FAILED OK
MSG_SELFTEST_FAN OK
MSG_SELFTEST_FAN_NO OK
MSG_SELFTEST_FAN_YES OK
MSG_SELFTEST_CHECK_BED OK
MSG_SELFTEST_CHECK_FSENSOR OK
MSG_SELFTEST_MOTOR OK
MSG_SELFTEST_WIRINGERROR OK
MSG_SETTINGS OK
MSG_SILENT_MODE_OFF OK
MSG_SILENT_MODE_ON OK
MSG_STEALTH_MODE_OFF OK
MSG_STEALTH_MODE_ON OK
MSG_STEEL_SHEET_CHECK OK
MSG_STOP_PRINT OK
MSG_STOPPED OK
MSG_TEMP_CALIBRATION OK
MSG_TEMP_CALIBRATION_DONE OK
MSG_UNLOAD_FILAMENT OK
MSG_UNLOADING_FILAMENT OK
MSG_WATCH OK
MSG_WIZARD_CALIBRATION_FAILED OK
MSG_WIZARD_DONE OK
MSG_WIZARD_HEATING OK
MSG_WIZARD_QUIT OK
MSG_YES OK
WELCOME_MSG OK

33
lang_upgrade/fix_source_1.sh Normal file
View file

@ -0,0 +1,33 @@
#!/bin/sh
# fix_source_1.sh - replace in code all usage of localized message constant from messages.h as _T(MSG_xxx)
if [ -e ./source ]; then
echo 'folder ./source already exists.'
read
exit
fi
#create target folder
echo 'creating target folder...'
mkdir ./source
#list all source files except *language* and *messages*
files=$(ls ../Firmware/*.c* | grep -v 'language' | grep -v 'messages'; ls ../Firmware/*.h | grep -v 'language' | grep -v 'messages' )
echo 'copying files...'
cp $files ./source/
#list all source files in target folder
files=$(ls ./source/*.c*; ls ./source/*.h )
#replace source - internatinalized messages used once with _i("TEXT")
echo 'processing msgs_en_used_once.txt'
cat msgs_en_used_more.txt | sed "s/\\\\/\\\\\\\\/g;s/\//\\\\\\\\\//g" | while read name cols rows text; do
if sed -i -E "s/\b$name\b/_T\($name\)/g" $files; then
echo "$name OK"
else
echo "$name NG!"
fi
done | tee fix_1.out
echo "fix1 finished... press key"
read
exit

13
lang_upgrade/make_lang_en.sh Normal file
View file

@ -0,0 +1,13 @@
#!/bin/sh
# make_lang_en.sh - create english dictionary from msgs
echo "make_lang_en.sh"
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/[ ]*$//g" |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' |\
sort -k4 | sed "s/^/#/;s/ \"/\n\"/;s/\"$/\"\n/" > lang_en.txt
echo "finished... press any key"
read
exit

60
lang_upgrade/make_lang_en_cz.sh Normal file
View file

@ -0,0 +1,60 @@
#!/bin/sh
# make_lang_en_cz.sh - create en_cz dictionary from msgs
echo "make_lang_en_cz.sh"
echo "please wait..."
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_en_.txt
cat msgs_cz.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_cz_.txt
cat lang_en.txt | sed "/^$/d;/^#/d" | sed "s/\\\/\\\\\\\/g" |\
while read text; do
msg=''
msg=$(grep -a -m 1 -h -w -F "$text" msgs_en_.txt)
if [ -z "$msg" ]; then
echo "#???"
echo "$text"
echo '"\x00"'
echo
else
name=$(echo $msg | cut -f1 -d' ')
cols=$(echo $msg | cut -f2 -d' ')
rows=$(echo $msg | cut -f3 -d' ')
echo "#$name $cols $rows"
echo "$text"
msg_cz=$(grep -a -m 1 -h "^$name " msgs_cz_.txt)
if [ -z "$msg_cz" ]; then
echo '"\x00"'
echo
else
text_cz=$(echo $msg_cz | cut -f2- -d' ')
echo "$text_cz"
echo
fi
fi
done > lang_en_cz.txt
rm msgs_en_.txt
rm msgs_cz_.txt
echo "finished... press any key"
read
exit
#not found in msgs_cz:
# MSG_EXTRUDER_CORRECTION_OFF " [off"
# MSG_MEASURED_OFFSET "[0;0] point offset"
# MSG_EXTRUDER_CORRECTION "E-correct"
# MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# MSG_PRINTER_DISCONNECTED "Printer disconnected"
# MSG_PRUSA3D "prusa3d.com"
# MSG_TEMP_CAL_WARNING "Stable ambient temperature 21-26C is needed a rigid stand is required."

60
lang_upgrade/make_lang_en_de.sh Normal file
View file

@ -0,0 +1,60 @@
#!/bin/sh
# make_lang_en_de.sh - create en_de dictionary from msgs
echo "make_lang_en_de.sh"
echo "please wait..."
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_en_.txt
cat msgs_de.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_de_.txt
cat lang_en.txt | sed "/^$/d;/^#/d" | sed "s/\\\/\\\\\\\/g" |\
while read text; do
msg=''
msg=$(grep -a -m 1 -h -w -F "$text" msgs_en_.txt)
if [ -z "$msg" ]; then
echo "#???"
echo "$text"
echo '"\x00"'
echo
else
name=$(echo $msg | cut -f1 -d' ')
cols=$(echo $msg | cut -f2 -d' ')
rows=$(echo $msg | cut -f3 -d' ')
echo "#$name $cols $rows"
echo "$text"
msg_de=$(grep -a -m 1 -h "^$name " msgs_de_.txt)
if [ -z "$msg_de" ]; then
echo '"\x00"'
echo
else
text_de=$(echo $msg_de | cut -f2- -d' ')
echo "$text_de"
echo
fi
fi
done > lang_en_de.txt
rm msgs_en_.txt
rm msgs_de_.txt
echo "finished... press any key"
read
exit
#not found in msgs_de:
# MSG_EXTRUDER_CORRECTION_OFF " [off"
# MSG_MEASURED_OFFSET "[0;0] point offset"
# MSG_EXTRUDER_CORRECTION "E-correct"
# MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# MSG_PRINTER_DISCONNECTED "Printer disconnected"
# MSG_PRUSA3D "prusa3d.com"
# MSG_TEMP_CAL_WARNING "Stable ambient temperature 21-26C is needed a rigid stand is required."

60
lang_upgrade/make_lang_en_es.sh Normal file
View file

@ -0,0 +1,60 @@
#!/bin/sh
# make_lang_en_es.sh - create en_es dictionary from msgs
echo "make_lang_en_es.sh"
echo "please wait..."
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_en_.txt
cat msgs_es.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_es_.txt
cat lang_en.txt | sed "/^$/d;/^#/d" | sed "s/\\\/\\\\\\\/g" |\
while read text; do
msg=''
msg=$(grep -a -m 1 -h -w -F "$text" msgs_en_.txt)
if [ -z "$msg" ]; then
echo "#???"
echo "$text"
echo '"\x00"'
echo
else
name=$(echo $msg | cut -f1 -d' ')
cols=$(echo $msg | cut -f2 -d' ')
rows=$(echo $msg | cut -f3 -d' ')
echo "#$name $cols $rows"
echo "$text"
msg_es=$(grep -a -m 1 -h "^$name " msgs_es_.txt)
if [ -z "$msg_es" ]; then
echo '"\x00"'
echo
else
text_es=$(echo $msg_es | cut -f2- -d' ')
echo "$text_es"
echo
fi
fi
done > lang_en_es.txt
rm msgs_en_.txt
rm msgs_es_.txt
echo "finished... press any key"
read
exit
#not found in msgs_es:
# MSG_EXTRUDER_CORRECTION_OFF " [off"
# MSG_MEASURED_OFFSET "[0;0] point offset"
# MSG_EXTRUDER_CORRECTION "E-correct"
# MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# MSG_PRINTER_DISCONNECTED "Printer disconnected"
# MSG_PRUSA3D "prusa3d.com"
# MSG_TEMP_CAL_WARNING "Stable ambient temperature 21-26C is needed a rigid stand is required."

60
lang_upgrade/make_lang_en_it.sh Normal file
View file

@ -0,0 +1,60 @@
#!/bin/sh
# make_lang_en_it.sh - create en_it dictionary from msgs
echo "make_lang_en_it.sh"
echo "please wait..."
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_en_.txt
cat msgs_it.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_it_.txt
cat lang_en.txt | sed "/^$/d;/^#/d" | sed "s/\\\/\\\\\\\/g" |\
while read text; do
msg=''
msg=$(grep -a -m 1 -h -w -F "$text" msgs_en_.txt)
if [ -z "$msg" ]; then
echo "#???"
echo "$text"
echo '"\x00"'
echo
else
name=$(echo $msg | cut -f1 -d' ')
cols=$(echo $msg | cut -f2 -d' ')
rows=$(echo $msg | cut -f3 -d' ')
echo "#$name $cols $rows"
echo "$text"
msg_it=$(grep -a -m 1 -h "^$name " msgs_it_.txt)
if [ -z "$msg_it" ]; then
echo '"\x00"'
echo
else
text_it=$(echo $msg_it | cut -f2- -d' ')
echo "$text_it"
echo
fi
fi
done > lang_en_it.txt
rm msgs_en_.txt
rm msgs_it_.txt
echo "finished... press any key"
read
exit
#not found in msgs_it:
# MSG_EXTRUDER_CORRECTION_OFF " [off"
# MSG_MEASURED_OFFSET "[0;0] point offset"
# MSG_EXTRUDER_CORRECTION "E-correct"
# MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# MSG_PRINTER_DISCONNECTED "Printer disconnected"
# MSG_PRUSA3D "prusa3d.com"
# MSG_TEMP_CAL_WARNING "Stable ambient temperature 21-26C is needed a rigid stand is required."

60
lang_upgrade/make_lang_en_pl.sh Normal file
View file

@ -0,0 +1,60 @@
#!/bin/sh
# make_lang_en_pl.sh - create en_pl dictionary from msgs
echo "make_lang_en_pl.sh"
echo "please wait..."
cat msgs_en_used_once.txt msgs_en_used_more.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_en_.txt
cat msgs_pl.txt |\
sed "s/\bCUSTOM_MENDEL_NAME\b/\"Prusa i3 MK3\"/g" |\
sed "s/\" \"//g" |\
sed 's/\\"/\\x22/g' |\
sed 's/\\xF8/\\xf8/g' > msgs_pl_.txt
cat lang_en.txt | sed "/^$/d;/^#/d" | sed "s/\\\/\\\\\\\/g" |\
while read text; do
msg=''
msg=$(grep -a -m 1 -h -w -F "$text" msgs_en_.txt)
if [ -z "$msg" ]; then
echo "#???"
echo "$text"
echo '"\x00"'
echo
else
name=$(echo $msg | cut -f1 -d' ')
cols=$(echo $msg | cut -f2 -d' ')
rows=$(echo $msg | cut -f3 -d' ')
echo "#$name $cols $rows"
echo "$text"
msg_pl=$(grep -a -m 1 -h "^$name " msgs_pl_.txt)
if [ -z "$msg_pl" ]; then
echo '"\x00"'
echo
else
text_pl=$(echo $msg_pl | cut -f2- -d' ')
echo "$text_pl"
echo
fi
fi
done > lang_en_pl.txt
rm msgs_en_.txt
rm msgs_pl_.txt
echo "finished... press any key"
read
exit
#not found in msgs_pl:
# MSG_EXTRUDER_CORRECTION_OFF " [off"
# MSG_MEASURED_OFFSET "[0;0] point offset"
# MSG_EXTRUDER_CORRECTION "E-correct"
# MSG_PRUSA3D_FORUM "forum.prusa3d.com"
# MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
# MSG_PRINTER_DISCONNECTED "Printer disconnected"
# MSG_PRUSA3D "prusa3d.com"
# MSG_TEMP_CAL_WARNING "Stable ambient temperature 21-26C is needed a rigid stand is required."

7
lang_upgrade/make_msgs.out Normal file
View file

@ -0,0 +1,7 @@
processing language_common.h ...ok (26 messages, 410 characters)
processing language_en.h ...ok (373 messages, 9704 characters)
processing language_cz.h ...ok (365 messages, 9639 characters)
processing language_de.h ...ok (67 messages, 2352 characters)
processing language_it.h ...ok (294 messages, 7808 characters)
processing language_pl.h ...ok (295 messages, 7308 characters)
processing language_es.h ...ok (289 messages, 7516 characters)

95
lang_upgrade/make_msgs.sh Normal file
View file

@ -0,0 +1,95 @@
#!/bin/sh
#
echo 'make_msgs.sh'
if [ -e make_msgs.out ]; then rm make_msgs.out; fi
CUSTOM_MENDEL_NAME='Prusa i3 MK3'
calc_charcount()
{
#extract texts for charcount calculation
cat $1 | cut -f$2- -d' ' | sed -E "s/\" \"//g" >_txt.txt_0
#replace printer name
cat _txt.txt_0 | sed -E "s/CUSTOM_MENDEL_NAME/\"$CUSTOM_MENDEL_NAME\"/g" >_txt.txt_1
#replace oct chars with space
cat _txt.txt_1 | sed -E "s/\\\\[0-7]{3}/ /g" >_txt.txt_2
#replace hex chars with space
cat _txt.txt_2 | sed -E "s/\\\\x[0-9A-Fa-f]{2}/ /g" >_txt.txt_3
#replace \" with '
cat _txt.txt_3 | sed -E "s/\\\\\"/'/g" >_txt.txt_4
#replace "_white_space_" with empty sequence - strigs
cat _txt.txt_4 | sed -E "s/\"[ \t]*\"//g" >_txt.txt_5
#replace " and white space at end of line
cat _txt.txt_5 | sed -E "s/\"[ \t]*$/\"/g" >_txt.txt_6
#replace all " with empty sequence
cat _txt.txt_6 | sed -E "s/\"//g" >_txt.txt_7
#calculate charcount
stat -c'%s' _txt.txt_7
rm _txt.txt_*
}
process_language_common()
{
echo -n ' processing language_common.h ...' | tee -a make_msgs.out
#list all defines without '+' prefix from language_common.h
#cat ../Firmware/language_common.h | grep -E "^[+]*define" | sed "s/lenght/length/g" >msgs_common.txt_0
cat ../Firmware/language_common.h | grep -E "^define" | sed "s/lenght/length/g" >msgs_common.txt_0
#replace define and +define
cat msgs_common.txt_0 | sed -E "s/^[+]*define[ \t]*([^ \t]*)[ \t]*([^ \t]*[ \t]*\"[^\"]*\"*)/\1 c=0 r=0 \2/g" | sort >msgs_common.txt
#calculate msgcount
msgcount=$(grep -c '' msgs_common.txt)
#calculate charcount
charcount=$(calc_charcount msgs_common.txt 4)
#remove tmp files
rm msgs_common.txt_*
echo "ok ($msgcount messages, $charcount characters)" | tee -a make_msgs.out
}
process_language_en()
{
echo -n ' processing language_en.h ...' | tee -a make_msgs.out
#list all defines from language_en.h
cat ../Firmware/language_en.h | grep "^#define" | sed "s/lenght/length/g" >msgs_en.txt_0
#replace #define(length=xx,lines=xx)
cat msgs_en.txt_0 | sed -E "s/^#define\(length=([0-9]*),[ \t]*lines=([0-9]*)\)[ \t]*([^ \t]*)[ \t]*([^ \t]*[ \t]*\"[^\"]*\"*)/\3 c=\1 r=\2 \4/g" >msgs_en.txt_1
#replace #define(length=xx)
cat msgs_en.txt_1 | sed -E "s/^#define\(length=([0-9]*)\)[ \t]*([^ \t]*)[ \t]*([^ \t]*[ \t]*\"[^\"]*\"*)/\2 c=\1 r=0 \3/g" >msgs_en.txt_2
#replace #define
cat msgs_en.txt_2 | sed -E "s/^#define[ \t]*([^ \t]*)[ \t]*([^ \t]*[ \t]*\"[^\"]*\"*)/\1 c=0 r=0 \2/g" | sort >msgs_en.txt
#calculate msgcount
msgcount=$(grep -c '' msgs_en.txt)
#calculate charcount
charcount=$(calc_charcount msgs_en.txt 4)
#remove tmp files
rm msgs_en.txt_*
echo "ok ($msgcount messages, $charcount characters)" | tee -a make_msgs.out
}
process_language_xx()
{
echo -n " processing language_$1.h ..." | tee -a make_msgs.out
#list all defines from language_cz.h
cat "../lang_backup/language_$1.h" | sed "s/[ \t]*\+//;s/^\+ #/#/;s/^\+#/#/" | grep -E "^#define" >"msgs_$1.txt_0"
cat "msgs_$1.txt_0" | sed "s/(length = [0-9]*)//" | sed "s/(length = [0-9]*, lines = [0-9]*)//" > "msgs_$1.txt_1"
cat "msgs_$1.txt_1" | sed -E "s/^#define[ \t]*([^ \t]*)[ \t]*([^ \t]*[ \t]*\"[^\"]*\"*)/\1 \2/g" | sort >"msgs_$1.txt"
#calculate msgcount
msgcount=$(grep -c '' "msgs_$1.txt")
#calculate charcount
charcount=$(calc_charcount "msgs_$1.txt" 2)
#remove tmp files
rm "msgs_$1.txt_0"
rm "msgs_$1.txt_1"
echo "ok ($msgcount messages, $charcount characters)" | tee -a make_msgs.out
}
#process_language_common
#process_language_en
#process_language_xx cz
process_language_xx de
#process_language_xx it
#process_language_xx pl
#process_language_xx es
echo "make_msgs.sh finished... press key"
read

75
lang_upgrade/make_source.sh Normal file
View file

@ -0,0 +1,75 @@
#!/bin/sh
# make_source.sh - step3 - replace old source files and generate new
if [ -e ./source ]; then
echo 'folder ./source already exists.'
read
exit
fi
#create target folder
echo 'creating target folder...'
mkdir ./source
#list all source files except *language*
files=$(ls ../Firmware/*.c* | grep -v 'language'; ls ../Firmware/*.h | grep -v 'language' )
#copy original source files to target folder
echo 'copying files...'
cp $files ./source/
#list all source files in target folder
files=$(ls ./source/*.c*; ls ./source/*.h )
#replace source - internatinalized messages used once with _i("TEXT")
echo 'processing msgs_en_used_once.txt'
cat msgs_en_used_once.txt | sed "s/\\\\/\\\\\\\\/g;s/\//\\\\\\\\\//g" | while read name cols rows text; do
comment="$name $cols $rows"
if sed -i -E "s/(.*)(\b$name\b)(.*)$/\1_i\($text\)\3\/\/\/\/$comment/g" $files; then
echo "$name OK"
else
echo "$name NG!"
fi
done | tee replace_en.out
#replace source - not internatinalized messages used once with _n("TEXT")
echo 'processing msgs_common_used_once.txt'
cat msgs_common_used_once.txt | sed "s/\\\\/\\\\\\\\/g;s/\//\\\\\\\\\//g" | while read name cols rows text; do
comment="$name $cols $rows"
if sed -i -E "s/(.*)(\b$name\b)(.*)$/\1_n\($text\)\3\/\/\/\/$comment/g" $files; then
echo "$name OK"
else
echo "$name NG!"
fi
done | tee replace_common.out
#messages used twice or more will be listed in messages.h and messages.c.
cp ./src/messages.h ./source/
cp ./src/messages.c ./source/
echo '//internationalized messages' | tee -a ./source/messages.h >> ./source/messages.c
cat msgs_en_used_more.txt | sed 's/\\/\\\\/g' | while read msg cols rows text; do
comment="$cols $rows"
echo "extern const char $msg[];" >> ./source/messages.h
echo "const char $msg[] PROGMEM_I1 = ISTR("$text"); ////$comment" >> ./source/messages.c
echo "$msg"
done
echo '//not internationalized messages' | tee -a ./source/messages.h >> ./source/messages.c
cat msgs_common_used_more.txt | sed 's/\\/\\\\/g' | while read msg cols rows text; do
comment="$cols $rows"
echo "extern const char $msg[];" >> ./source/messages.h
echo "const char $msg[] PROGMEM_N1 = "$text"; ////$comment" >> ./source/messages.c
echo "$msg"
done
#copy new source files
cp ./src/language.h ./source/
cp ./src/language.c ./source/
cp ./src/config.h ./source/
#replace line with declaration in Marlin_main.cpp
sed -i -E "s/^(unsigned char lang_selected = 0;)/\/\/\1/" ./source/Marlin_main.cpp
echo "step3 finished... press key"
read
exit

26
lang_upgrade/msgs_common.txt Normal file
View file

@ -0,0 +1,26 @@
MSG_ACTIVE_EXTRUDER c=0 r=0 "Active Extruder: "
MSG_AUTHOR c=0 r=0 " | Author: "
MSG_BROWNOUT_RESET c=0 r=0 " Brown out Reset"
MSG_COUNT_X c=0 r=0 " Count X: "
MSG_ERR_LINE_NO c=0 r=0 "Line Number is not Last Line Number+1, Last Line: "
MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0 " too long extrusion prevented"
MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0 "No Line Number with checksum, Last Line: "
MSG_EXTERNAL_RESET c=0 r=0 " External Reset"
MSG_FILE_PRINTED c=0 r=0 "Done printing file"
MSG_FILE_SAVED c=0 r=0 "Done saving file."
MSG_INVALID_EXTRUDER c=0 r=0 "Invalid extruder"
MSG_OFF c=0 r=0 "Off"
MSG_ON c=0 r=0 "On "
MSG_POSITION_UNKNOWN c=0 r=0 "Home X/Y before Z"
MSG_SD_SIZE c=0 r=0 " Size: "
MSG_SOFTWARE_RESET c=0 r=0 " Software Reset"
MSG_UNKNOWN_COMMAND c=0 r=0 "Unknown command: \""
MSG_WATCHDOG_RESET c=0 r=0 " Watchdog Reset"
MSG_X_MAX c=0 r=0 "x_max: "
MSG_X_MIN c=0 r=0 "x_min: "
MSG_Y_MAX c=0 r=0 "y_max: "
MSG_Y_MIN c=0 r=0 "y_min: "
MSG_Z_MAX c=0 r=0 "z_max: "
MSG_Z_MIN c=0 r=0 "z_min: "
MSG_ZPROBE_OUT c=0 r=0 "Z probe out. bed"
MSG_ZPROBE_ZOFFSET c=0 r=0 "Z Offset"

0
lang_upgrade/msgs_common_unused.txt Normal file
View file

13
lang_upgrade/msgs_common_used_more.txt Normal file
View file

@ -0,0 +1,13 @@
MSG_BROWNOUT_RESET c=0 r=0 " Brown out Reset"
MSG_EXTERNAL_RESET c=0 r=0 " External Reset"
MSG_FILE_SAVED c=0 r=0 "Done saving file."
MSG_OFF c=0 r=0 "Off"
MSG_ON c=0 r=0 "On "
MSG_POSITION_UNKNOWN c=0 r=0 "Home X/Y before Z"
MSG_SOFTWARE_RESET c=0 r=0 " Software Reset"
MSG_UNKNOWN_COMMAND c=0 r=0 "Unknown command: \""
MSG_WATCHDOG_RESET c=0 r=0 " Watchdog Reset"
MSG_Z_MAX c=0 r=0 "z_max: "
MSG_Z_MIN c=0 r=0 "z_min: "
MSG_ZPROBE_OUT c=0 r=0 "Z probe out. bed"
MSG_ZPROBE_ZOFFSET c=0 r=0 "Z Offset"

13
lang_upgrade/msgs_common_used_once.txt Normal file
View file

@ -0,0 +1,13 @@
MSG_ACTIVE_EXTRUDER c=0 r=0 "Active Extruder: "
MSG_AUTHOR c=0 r=0 " | Author: "
MSG_COUNT_X c=0 r=0 " Count X: "
MSG_ERR_LINE_NO c=0 r=0 "Line Number is not Last Line Number+1, Last Line: "
MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0 " too long extrusion prevented"
MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0 "No Line Number with checksum, Last Line: "
MSG_FILE_PRINTED c=0 r=0 "Done printing file"
MSG_INVALID_EXTRUDER c=0 r=0 "Invalid extruder"
MSG_SD_SIZE c=0 r=0 " Size: "
MSG_X_MAX c=0 r=0 "x_max: "
MSG_X_MIN c=0 r=0 "x_min: "
MSG_Y_MAX c=0 r=0 "y_max: "
MSG_Y_MIN c=0 r=0 "y_min: "

365
lang_upgrade/msgs_cz.txt Normal file
View file

@ -0,0 +1,365 @@
MSG_ADJUSTZ "Auto doladit Z ?"
MSG_ALL "Vse"
MSG_AUTO_HOME "Auto home"
MSG_AUTO_MODE_ON "Mod [automaticky]"
MSG_AUTOLOAD_FILAMENT "AutoZavedeni fil."
MSG_AUTOLOADING_ENABLED "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
MSG_AUTOLOADING_ONLY_IF_FSENS_ON "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru..."
MSG_BABYSTEP_X "Babystep X"
MSG_BABYSTEP_Y "Babystep Y"
MSG_BABYSTEP_Z "Doladeni osy Z"
MSG_BABYSTEP_Z_NOT_SET "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy."
MSG_BABYSTEPPING_X "Babystepping X"
MSG_BABYSTEPPING_Y "Babystepping Y"
MSG_BABYSTEPPING_Z "Dostavovani Z"
MSG_BED "Bed"
MSG_BED_CORRECTION_FRONT "Vpredu [um]"
MSG_BED_CORRECTION_LEFT "Vlevo [um]"
MSG_BED_CORRECTION_MENU "Korekce podlozky"
MSG_BED_CORRECTION_REAR "Vzadu [um]"
MSG_BED_CORRECTION_RESET "Reset"
MSG_BED_CORRECTION_RIGHT "Vpravo [um]"
MSG_BED_DONE "Bed OK."
MSG_BED_HEATING "Zahrivani bed"
MSG_BED_HEATING_SAFETY_DISABLED "Zahrivani preruseno bezpecnostnim casovacem."
MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibrace Z selhala. Sensor sepnul prilis vysoko. Cekam na reset."
MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibrace Z selhala. Sensor je odpojeny nebo preruseny kabel. Cekam na reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibrace XYZ selhala. Levy predni bod moc vpredu. Srovnejte tiskarnu."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibrace XYZ selhala. Nahlednete do manualu."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibrace XYZ nepresna. Levy predni bod moc vpredu."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu."
MSG_BEGIN_FILE_LIST "Begin file list"
MSG_CALIBRATE_BED "Kalibrace XYZ"
MSG_CALIBRATE_BED_RESET "Reset XYZ kalibr."
MSG_CALIBRATE_E "Kalibrovat E"
MSG_CALIBRATE_PINDA "Zkalibrovat"
MSG_CALIBRATE_Z_AUTO "Kalibruji Z"
MSG_CALIBRATION_PINDA_MENU "Teplot. kalibrace"
MSG_CARD_MENU "Tisk z SD"
MSG_CLEAN_NOZZLE_E "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem."
MSG_CNG_SDCARD "Vymenit SD"
MSG_CONFIGURATION_VER " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Dojely oba Z voziky k~hornimu dorazu?"
MSG_CONFIRM_NOZZLE_CLEAN "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem."
MSG_CONTROL "Kontrola"
MSG_COOLDOWN "Zchladit"
MSG_CORRECTLY "Vymena ok?"
MSG_CRASH_DET_ONLY_IN_NORMAL "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu"
MSG_CRASH_DET_STEALTH_FORCE_OFF "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu"
MSG_CRASH_DETECTED "Detekovan naraz."
MSG_CRASH_DETECTED2 "Naraz detekovan, pokracovat v tisku?"
MSG_CRASHDETECT_NA "Crash det. [N/A]"
MSG_CRASHDETECT_OFF "Crash det. [vyp]"
MSG_CRASHDETECT_ON "Crash det. [zap]"
MSG_CURRENT "Pouze aktualni"
MSG_DATE "Datum:"
MSG_DEFAULT_SETTINGS_LOADED "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
MSG_DISABLE_STEPPERS "Vypnout motory"
MSG_DWELL "Sleep..."
MSG_E_CAL_KNOB "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem."
MSG_END_FILE_LIST "End file list"
MSG_ENDSTOP_HIT "TRIGGERED"
MSG_ENDSTOP_OPEN "open"
MSG_ENDSTOPS_HIT "endstops hit: "
MSG_Enqueing "enqueing \""
MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
MSG_ERR_KILLED "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR "CHYBA:"
MSG_EXTRUDER "Extruder"
MSG_EXTRUDER_1 "Extruder 1"
MSG_EXTRUDER_2 "Extruder 2"
MSG_EXTRUDER_3 "Extruder 3"
MSG_EXTRUDER_4 "Extruder 4"
MSG_FACTOR " \002 Fact"
MSG_FAN_SPEED "Rychlost vent."
MSG_FANS_CHECK_OFF "Kontr. vent.[vyp]"
MSG_FANS_CHECK_ON "Kontr. vent.[zap]"
MSG_FIL_ADJUSTING "Probiha srovnani filamentu. Prosim cekejte."
MSG_FILAMENT_CLEAN "Filament vytlacen a spravne barvy?"
MSG_FILAMENT_LOADING_T0 "Vlozte filament do extruderu 1. Potvrdte tlacitkem."
MSG_FILAMENT_LOADING_T1 "Vlozte filament do extruderu 2. Potvrdte tlacitkem."
MSG_FILAMENT_LOADING_T2 "Vlozte filament do extruderu 3. Potvrdte tlacitkem."
MSG_FILAMENT_LOADING_T3 "Vlozte filament do extruderu 4. Potvrdte tlacitkem."
MSG_FILAMENT_SENSOR "Senzor filamentu"
MSG_FILAMENTCHANGE "Vymenit filament"
MSG_FILE_CNT "Nektere soubory nebudou setrideny. Maximalni pocet souboru pro setrideni je 100."
MSG_FILE_INCOMPLETE "Soubor nekompletni. Pokracovat?"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iterace "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Hledam kalibracni bod podlozky"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " z 4"
MSG_FINISHING_MOVEMENTS "Dokoncovani pohybu"
MSG_FLOW "Prutok"
MSG_FLOW0 "Prutok 0"
MSG_FLOW1 "Prutok 1"
MSG_FLOW2 "Prutok 2"
MSG_FOLLOW_CALIBRATION_FLOW "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace."
MSG_FORCE_SELFTEST "Pro kalibraci presneho rehomovani bude nyni spusten selftest."
MSG_FREE_MEMORY " Free Memory: "
MSG_FSENS_AUTOLOAD_NA "F. autozav. [N/A]"
MSG_FSENS_AUTOLOAD_OFF "F. autozav. [vyp]"
MSG_FSENS_AUTOLOAD_ON "F. autozav. [zap]"
MSG_FSENS_NOT_RESPONDING "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
MSG_FSENSOR_NA "Fil. senzor [N/A]"
MSG_FSENSOR_OFF "Fil. senzor [vyp]"
MSG_FSENSOR_ON "Fil. senzor [zap]"
MSG_FW_VERSION_ALPHA "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
MSG_FW_VERSION_BETA "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
MSG_FW_VERSION_RC "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive."
MSG_FW_VERSION_UNKNOWN "VAROVANI: Neznama, nepodporovana verze firmware. Pouziti na vlastni nebezpeci!"
MSG_HEATING "Zahrivani"
MSG_HEATING_COMPLETE "Zahrivani OK."
MSG_HOMEYZ "Kalibrovat Z"
MSG_HOMEYZ "Kalibrovat Z"
MSG_HOMEYZ_DONE "Kalibrace OK"
MSG_HOMEYZ_DONE "Kalibrace OK"
MSG_HOMEYZ_PROGRESS "Kalibruji Z"
MSG_HOMEYZ_PROGRESS "Kalibruji Z"
MSG_CHANGE_EXTR "Zmenit extruder"
MSG_CHANGE_SUCCESS "Zmena uspesna!"
MSG_CHANGED_BOTH "Varovani: doslo ke zmene typu tiskarny a motherboardu."
MSG_CHANGED_MOTHERBOARD "Varovani: doslo ke zmene typu motherboardu."
MSG_CHANGED_PRINTER "Varovani: doslo ke zmene typu tiskarny."
MSG_CHANGING_FILAMENT "Vymena filamentu!"
MSG_CHECK_IDLER "Prosim otevrete idler a manualne odstrante filament."
MSG_CHOOSE_EXTRUDER "Vyberte extruder:"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Zlepsuji presnost kalibracniho bodu"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 4"
MSG_INFO_EXTRUDER "Extruder info"
MSG_INFO_NOZZLE_FAN "Trysk. vent:"
MSG_INFO_PRINT_FAN "Tisk. vent:"
MSG_INIT_SDCARD "Inic. SD"
MSG_INSERT_FILAMENT "Vlozte filament"
MSG_KILLED "KILLED. "
MSG_LANGUAGE_NAME "Cestina"
MSG_LANGUAGE_SELECT "Vyber jazyka"
MSG_LEFT "Levy:"
MSG_LOAD_ALL "Zavest vse"
MSG_LOAD_EPROM "Ulozit pamet"
MSG_LOAD_FILAMENT "Zavest filament"
MSG_LOAD_FILAMENT_1 "Zavest filament 1"
MSG_LOAD_FILAMENT_2 "Zavest filament 2"
MSG_LOAD_FILAMENT_3 "Zavest filament 3"
MSG_LOAD_FILAMENT_4 "Zavest filament 4"
MSG_LOADING_COLOR "Cisteni barvy"
MSG_LOADING_FILAMENT "Zavadeni filamentu"
MSG_LOOSE_PULLEY "Uvolnena remenicka"
MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
MSG_M117_V2_CALIBRATION "M117 Kal. prvni vrstvy"
MSG_M119_REPORT "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
MSG_MAIN "Hlavni nabidka"
MSG_MARK_FIL "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem."
MSG_MAX " \002 Max"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Merim referencni vysku kalibracniho bodu"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
MSG_MEASURED_SKEW "Merene zkoseni:"
MSG_MENU_BELT_STATUS "Stav remenu"
MSG_MENU_CALIBRATION "Kalibrace"
MSG_MENU_TEMPERATURES "Teploty"
MSG_MENU_VOLTAGES "Napeti"
MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
MSG_MIN " \002 Min"
MSG_MOTION "Pohyb"
MSG_MOVE_AXIS "Posunout osu"
MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
MSG_MOVE_E "Extruder"
MSG_MOVE_X "Posunout X"
MSG_MOVE_Y "Posunout Y"
MSG_MOVE_Z "Posunout Z"
MSG_NEW_FIRMWARE_AVAILABLE "Vysla nova verze firmware:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosim aktualizujte."
MSG_NO "Ne"
MSG_NO_CARD "Zadna SD karta"
MSG_NO_MOVE "No move."
MSG_NOT_COLOR "Barva neni cista"
MSG_NOT_LOADED "Filament nezaveden"
MSG_NOZZLE "Tryska"
MSG_NOZZLE1 "Tryska2"
MSG_NOZZLE2 "Tryska3"
MSG_OK "ok"
MSG_PAPER "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, vypnete tiskarnu."
MSG_PAUSE_PRINT "Pozastavit tisk"
MSG_PICK_Z "Vyberte vytisk"
MSG_PID_EXTRUDER "PID kalibrace"
MSG_PID_FINISHED "PID kal. ukoncena"
MSG_PID_RUNNING "PID kal. "
MSG_PINDA_NOT_CALIBRATED "Tiskarna nebyla teplotne zkalibrovana"
MSG_PINDA_PREHEAT "Nahrivani PINDA"
MSG_PLA_FILAMENT_LOADED "Je PLA filament zaveden?"
MSG_PLACE_STEEL_SHEET "Umistete prosim tiskovy plat na heatbed"
MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA "Nejdrive zavedte PLA filament prosim."
MSG_PLEASE_WAIT "Prosim cekejte"
MSG_POWERUP "PowerUp"
MSG_PREHEAT "Predehrev"
MSG_PREHEAT_NOZZLE "Predehrejte trysku!"
MSG_PREPARE_FILAMENT "Pripravte filament"
MSG_PRESS "a stisknete tlacitko"
MSG_PRESS_TO_PREHEAT "Pro nahrati trysky a pokracovani stisknete tlacitko."
MSG_PRESS_TO_UNLOAD "Pro vysunuti filamentu stisknete prosim tlacitko"
MSG_PRINT_ABORTED "Tisk prerusen"
MSG_PRINT_PAUSED "Tisk pozastaven"
MSG_PULL_OUT_FILAMENT "Prosim vyjmete urychlene filament"
MSG_REBOOT "Restartujte tiskarnu"
MSG_RECOVER_PRINT "Detekovan vypadek proudu.Obnovit tisk?"
MSG_RECOVERING_PRINT "Obnovovani tisku "
MSG_RECTRACT "Rectract"
MSG_REFRESH "\xF8" "Obnovit"
MSG_REMOVE_STEEL_SHEET "Odstrante tiskovy plat z heatbed prosim."
MSG_RESEND "Resend: "
MSG_RESTORE_FAILSAFE "Obnovit vychozi"
MSG_RESUME_PRINT "Pokracovat"
MSG_RESUMING "Obnoveni tisku"
MSG_RESUMING_PRINT "Obnovovani tisku"
MSG_RIGHT "Pravy:"
MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
MSG_SD_CARD_OK "SD card ok"
MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
MSG_SD_FILE_OPENED "File opened: "
MSG_SD_FILE_SELECTED "File selected"
MSG_SD_INIT_FAIL "SD init fail"
MSG_SD_INSERTED "Karta vlozena"
MSG_SD_NOT_PRINTING "Not SD printing"
MSG_SD_OPEN_FILE_FAIL "open failed, File: "
MSG_SD_OPENROOT_FAIL "openRoot failed"
MSG_SD_PRINTING_BYTE "SD printing byte "
MSG_SD_REMOVED "Karta vyjmuta"
MSG_SD_VOL_INIT_FAIL "volume.init failed"
MSG_SD_WORKDIR_FAIL "workDir open failed"
MSG_SD_WRITE_TO_FILE "Writing to file: "
MSG_SECOND_SERIAL_OFF "RPi port [vyp]"
MSG_SECOND_SERIAL_ON "RPi port [zap]"
MSG_SELFTEST "Selftest "
MSG_SELFTEST_AXIS "Osa"
MSG_SELFTEST_AXIS_LENGTH "Delka osy"
MSG_SELFTEST_BEDHEATER "Bed / Heater"
MSG_SELFTEST_COOLING_FAN "Predni tiskovy vent?"
MSG_SELFTEST_ENDSTOP "Endstop"
MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
MSG_SELFTEST_ENDSTOPS "Endstops"
MSG_SELFTEST_ERROR "Selftest error !"
MSG_SELFTEST_EXTRUDER_FAN "Levy vent na trysce?"
MSG_SELFTEST_EXTRUDER_FAN_SPEED "Levy vent.:"
MSG_SELFTEST_FAILED "Selftest selhal "
MSG_SELFTEST_FAN "Test ventilatoru"
MSG_SELFTEST_FAN_NO "Netoci se"
MSG_SELFTEST_FAN_YES "Toci se"
MSG_SELFTEST_FANS "Predni/levy vent."
MSG_SELFTEST_FILAMENT_SENSOR "Senzor filamentu:"
MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
MSG_SELFTEST_CHECK_ALLCORRECT "Vse OK "
MSG_SELFTEST_CHECK_BED "Kontrola bed "
MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
MSG_SELFTEST_CHECK_FSENSOR "Kontrola senzoru"
MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend "
MSG_SELFTEST_CHECK_X "Kontrola X axis "
MSG_SELFTEST_CHECK_Y "Kontrola Y axis "
MSG_SELFTEST_CHECK_Z "Kontrola Z axis "
MSG_SELFTEST_MOTOR "Motor"
MSG_SELFTEST_NOTCONNECTED "Nezapojeno "
MSG_SELFTEST_OK "Self test OK"
MSG_SELFTEST_PLEASECHECK "Zkontrolujte :"
MSG_SELFTEST_PRINT_FAN_SPEED "Tiskovy vent.:"
MSG_SELFTEST_START "Self test start "
MSG_SELFTEST_SWAPPED "Prohozene"
MSG_SELFTEST_WIRINGERROR "Chyba zapojeni"
MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
MSG_SET_HOME_OFFSETS "Nastav pocatek home"
MSG_SET_ORIGIN "Nastav pocatek"
MSG_SET_TEMPERATURE "Nastavte teplotu:"
MSG_SETTINGS "Nastaveni"
MSG_SEVERE_SKEW "Tezke zkoseni:"
MSG_SHOW_END_STOPS "Stav konc. spin."
MSG_SILENT_MODE_OFF "Mod [vys. vykon]"
MSG_SILENT_MODE_ON "Mod [tichy]"
MSG_SLIGHT_SKEW "Lehke zkoseni:"
MSG_SORT_ALPHA "Trideni [Abeceda]"
MSG_SORT_NONE "Trideni [Zadne]"
MSG_SORT_TIME "Trideni [Cas]"
MSG_SORTING "Trideni souboru"
MSG_SPEED "Rychlost"
MSG_STACK_ERROR "Chyba - Doslo k prepisu staticke pameti!"
MSG_STATISTICS "Statistika "
MSG_STATS_FILAMENTUSED "Filament : "
MSG_STATS_PRINTTIME "Cas tisku : "
MSG_STATS_TOTALFILAMENT "Filament celkem :"
MSG_STATS_TOTALPRINTTIME "Celkovy cas :"
MSG_STEALTH_MODE_OFF "Mod [Normal]"
MSG_STEALTH_MODE_ON "Mod [Stealth]"
MSG_STEEL_SHEET_CHECK "Je tiskovy plat na heatbed?"
MSG_STEPPER_TOO_HIGH "Steprate too high: "
MSG_STOP_PRINT "Zastavit tisk"
MSG_STOPPED "STOPPED. "
MSG_STORE_EPROM "Store memory"
MSG_SUPPORT "Podpora"
MSG_SWITCH_PS_OFF "Zapnout zdroj"
MSG_SWITCH_PS_ON "Vypnout zdroj"
MSG_TAKE_EFFECT " pro projeveni zmen"
MSG_TEMP_CAL_FAILED "Teplotni kalibrace selhala"
MSG_TEMP_CALIBRATION "Tepl. kal. "
MSG_TEMP_CALIBRATION_DONE "Teplotni kalibrace dokoncena a je nyni aktivni. Teplotni kalibraci je mozno deaktivovat v menu Nastaveni->Tepl. kal."
MSG_TEMP_CALIBRATION_OFF "Tepl. kal. [vyp]"
MSG_TEMP_CALIBRATION_ON "Tepl. kal. [zap]"
MSG_TEMPERATURE "Teplota"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
MSG_TUNE "Ladit"
MSG_UNLOAD_ALL "Vyjmout vse"
MSG_UNLOAD_FILAMENT "Vyjmout filament"
MSG_UNLOAD_FILAMENT_1 "Vyjmout filam. 1"
MSG_UNLOAD_FILAMENT_2 "Vyjmout filam. 2"
MSG_UNLOAD_FILAMENT_3 "Vyjmout filam. 3"
MSG_UNLOAD_FILAMENT_4 "Vyjmout filam. 4"
MSG_UNLOAD_SUCCESSFUL "Bylo vysunuti filamentu uspesne?"
MSG_UNLOADING_FILAMENT "Vysouvam filament"
MSG_USB_PRINTING "Tisk z USB "
MSG_USED "Pouzite behem tisku"
MSG_USERWAIT "Wait for user..."
MSG_V2_CALIBRATION "Kal. prvni vrstvy"
MSG_VOLUMETRIC "Filament"
MSG_VOLUMETRIC_ENABLED "E in mm3"
MSG_WAITING_TEMP "Cekani na zchladnuti trysky a podlozky."
MSG_WAITING_TEMP_PINDA "Cekani na zchladnuti PINDA"
MSG_WATCH "Informace"
MSG_WIZARD "Wizard"
MSG_WIZARD_CALIBRATION_FAILED "Prosim nahlednete do manualu a opravte problem. Po te obnovte Wizarda rebootovanim tiskarny."
MSG_WIZARD_CLEAN_HEATBED "Prosim ocistete heatbed a stisknete tlacitko."
MSG_WIZARD_DONE "Vse je hotovo."
MSG_WIZARD_FILAMENT_LOADED "Je filament zaveden?"
MSG_WIZARD_HEATING "Predehrivam trysku. Prosim cekejte."
MSG_WIZARD_INSERT_CORRECT_FILAMENT "Prosim zavedte PLA filament a po te obnovte Wizarda stisknutim reset tlacitka."
MSG_WIZARD_LOAD_FILAMENT "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu."
MSG_WIZARD_PLA_FILAMENT "Je to PLA filament?"
MSG_WIZARD_QUIT "Wizarda muzete kdykoliv znovu spustit z menu Calibration -> Wizard"
MSG_WIZARD_REPEAT_V2_CAL "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a heatbed?"
MSG_WIZARD_RERUN "Spusteni Wizarda vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?"
MSG_WIZARD_SELFTEST "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny."
MSG_WIZARD_V2_CAL "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem heatbedu."
MSG_WIZARD_V2_CAL_2 "Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace"
MSG_WIZARD_WELCOME "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?"
MSG_WIZARD_WILL_PREHEAT "Nyni predehreji trysku pro PLA."
MSG_WIZARD_XYZ_CAL "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min."
MSG_WIZARD_Z_CAL "Nyni provedu z kalibraci."
MSG_XYZ_DETAILS "Detaily XYZ kal."
MSG_Y_DISTANCE_FROM_MIN "Y vzdalenost od min:"
MSG_YES "Ano"
WELCOME_MSG CUSTOM_MENDEL_NAME " ok"

296
lang_upgrade/msgs_de.txt Normal file
View file

@ -0,0 +1,296 @@
MSG_ADJUSTZ "Auto Z einstellen?"
MSG_ALL "Alle"
MSG_AUTO_HOME "Startposition"
MSG_BABYSTEP_X "Babystep X"
MSG_BABYSTEP_Y "Babystep Y"
MSG_BABYSTEP_Z "Z einstellen"
MSG_BABYSTEP_Z_NOT_SET "Der Abstand zwischen der Spitze der Duese und der Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, First steps, section First layer calibration."
MSG_BABYSTEPPING_X "Babystepping X"
MSG_BABYSTEPPING_Y "Babystepping Y"
MSG_BABYSTEPPING_Z "Z wurde eingestellt"
MSG_BED "Bett"
MSG_BED_CORRECTION_FRONT "Vorne [um]"
MSG_BED_CORRECTION_LEFT "Links [um]"
MSG_BED_CORRECTION_MENU "Bett level Korrekt"
MSG_BED_CORRECTION_REAR "Hinten [um]"
MSG_BED_CORRECTION_RESET "Ruecksetzen"
MSG_BED_CORRECTION_RIGHT "Rechts [um]"
MSG_BED_DONE "Bett OK"
MSG_BED_HEATING "Bett aufwaermen"
MSG_BED_LEVELING_FAILED_POINT_HIGH "Z-Kalibrierung fehlgeschlg. Sensor zu hoch ausgeloest. Warte auf Reset."
MSG_BED_LEVELING_FAILED_POINT_LOW "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset"
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Z-Kalibrierung fehlgeschlg. Sensor nicht angeschlossen. Warte auf Reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte sind zu weit vorne."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt ist zu weit vorne."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander. Glueckwunsch!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ Kalibrierung in Ordnung. Schiefheit wird automatisch korrigiert."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schief."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "XYZ-Kalibrierung ungenau. Vordere Kalibrierpunkte sind zu weit vorne."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "XYZ-Kalibrierung ungenau. Linker vorderer Kalibrierpunkt ist zu weit vorne."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "XYZ-Kalibrierung ungenau. Rechter vorderer Kalibrierpunkt ist zu weit vorne."
MSG_BEGIN_FILE_LIST "Beginn Dateiliste"
MSG_CALIBRATE_BED "Kalibrierung XYZ"
MSG_CALIBRATE_BED_RESET "Reset XYZ Kalibr."
MSG_CALIBRATE_E "Kalibriere E"
MSG_CALIBRATE_PINDA "Kalibrieren"
MSG_CALIBRATION_PINDA_MENU "Temp. kalibrieren"
MSG_CARD_MENU "Drucken von SD"
MSG_CLEAN_NOZZLE_E "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig."
MSG_CNG_SDCARD "Wechsel SD Karte"
MSG_CONFIGURATION_VER " Letztes Update:"
MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Ist der Schlitten ganz oben?"
MSG_CONFIRM_NOZZLE_CLEAN "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamente sind jetzt eingestellt. Bitte reinigen Sie die Duese zur Kalibrierung. Klicken wenn fertig."
MSG_CONTROL "Kontrolle"
MSG_COOLDOWN "Abkuehlen"
MSG_CORRECTLY "Wechsel ok?"
MSG_CURRENT "Aktuelles"
MSG_DATE "Datum"
MSG_DISABLE_STEPPERS "Motoren aus"
MSG_DWELL "Einen Moment bitte."
MSG_E_CAL_KNOB "Knopf drehen bis die Filamentmarkierung erreicht ist. Klicken wenn fertig."
MSG_END_FILE_LIST "Ende Dateiliste"
MSG_ENDSTOP_HIT "AUSGELOEST"
MSG_ENDSTOP_OPEN "offen"
MSG_ENDSTOPS_HIT "Endanschlag erreicht"
MSG_Enqueing "enqueuing \"
MSG_ERR_COLD_EXTRUDE_STOP "Stopp, Extruder kalt!"
MSG_ERR_CHECKSUM_MISMATCH "Pruefsummenfehler, Letzte Zeile: " //Checksum Fehler, Letzte Zeile: "
MSG_ERR_KILLED "Printer gestoppt. kill() aufgerufen!"
MSG_ERR_NO_CHECKSUM "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " //Keine Checksum mit Zeilennummer, Letzte Zeile: "
MSG_ERR_NO_THERMISTORS "Keine Thermistoren - keine Temperatur"
MSG_ERR_STOPPED "Drucker aufgrund von Fehlern gestoppt. Fehler beheben und mit M999 neu starten. (Temperatur wird zurueckgesetzt. Nach dem Neustart neu einstellen!)"
MSG_ERROR "FEHLER:"
MSG_EXTRUDER "Extruder"
MSG_EXTRUDER_1 "Extruder 1"
MSG_EXTRUDER_2 "Extruder 2"
MSG_EXTRUDER_3 "Extruder 3"
MSG_EXTRUDER_4 "Extruder 4"
MSG_FACTOR " \002 Fakt"
MSG_FAN_SPEED "Luefter-Tempo"
MSG_FIL_ADJUSTING "Filament positionieren. Bitte warten."
MSG_FILAMENT_CLEAN "Ist Farbe rein?"
MSG_FILAMENT_LOADING_T0 "Filament in extruder 1 einlegen. Klicken wenn fertig."
MSG_FILAMENT_LOADING_T1 "Filament in extruder 2 einlegen. Klicken wenn fertig."
MSG_FILAMENT_LOADING_T2 "Filament in extruder 3 einlegen. Klicken wenn fertig."
MSG_FILAMENT_LOADING_T3 "Filament in extruder 4 einlegen. Klicken wenn fertig."
MSG_FILAMENTCHANGE "Filament-Wechsel"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Suchen Bett Kalibrierpunkt"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " von 4"
MSG_FINISHING_MOVEMENTS "Bewegung beenden"
MSG_FLOW "Durchfluss"
MSG_FLOW0 "Durchfluss 0"
MSG_FLOW1 "Durchfluss 1"
MSG_FLOW2 "Durchfluss 2"
MSG_FOLLOW_CALIBRATION_FLOW "Der Drucker wurde noch nicht kalibriert. Bitte folgen Sie das Handbuch, Kapitel First steps, Abschnitt Calibration flow."
MSG_FREE_MEMORY " Freier Speicher: "
MSG_HEATING "Aufwaermen"
MSG_HEATING_COMPLETE "Aufwaermen OK"
MSG_HOMEYZ "Kalibrieren Z"
MSG_HOMEYZ_DONE "Kalibrierung OK"
MSG_HOMEYZ_PROGRESS "Kalibriere Z"
MSG_CHANGE_EXTR "Wechsel extruder"
MSG_CHANGE_SUCCESS "Wechsel erfolgr.!"
MSG_CHANGING_FILAMENT "Filament-Wechsel!"
MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Verbesserung Bett Kalibrierpunkt"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " von 4"
MSG_INIT_SDCARD "Init SD Karte"
MSG_INSERT_FILAMENT "Filament einlegen"
MSG_KILLED "ABGEBROCHEN. "
MSG_LANGUAGE_NAME "Deutsch"
MSG_LANGUAGE_SELECT "Waehle Sprache"
MSG_LEFT "Links:"
MSG_LOAD_ALL "Alle laden"
MSG_LOAD_EPROM "Lade Speicher"
MSG_LOAD_FILAMENT "Filament laden"
MSG_LOAD_FILAMENT_1 "Filament 1 laden"
MSG_LOAD_FILAMENT_2 "Filament 2 laden"
MSG_LOAD_FILAMENT_3 "Filament 3 laden"
MSG_LOAD_FILAMENT_4 "Filament 4 laden"
MSG_LOADING_COLOR "Lade Farbe"
MSG_LOADING_FILAMENT "Filament leadt"
MSG_LOOSE_PULLEY "Lose Riemenscheibe"
MSG_M104_INVALID_EXTRUDER "M104 Falscher Extruder"
MSG_M105_INVALID_EXTRUDER "M105 Falscher Extruder"
MSG_M109_INVALID_EXTRUDER "M109 Falscher Extruder"
MSG_M117_V2_CALIBRATION "M117 Erste-Schicht Kal."
MSG_M119_REPORT "Statusbericht Endanschlag"
MSG_M200_INVALID_EXTRUDER "M200 Falscher Extruder"
MSG_M218_INVALID_EXTRUDER "M218 Falscher Extruder"
MSG_M221_INVALID_EXTRUDER "M221 Falscher Extruder"
MSG_MAIN "Hauptmenue"
MSG_MARK_FIL "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig."
MSG_MAX " \002 Max"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Messen der Referenzhoehe des Kalibrierpunktes"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " von 9"
MSG_MEASURED_SKEW "Schraeglauf:"
MSG_MENU_CALIBRATION "Kalibrierung"
MSG_MESH_BED_LEVELING "Mesh Bett Leveling"
MSG_MIN " \002 Min"
MSG_MOTION "Bewegung"
MSG_MOVE_AXIS "Achsbewegung"
MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrieren von XYZ. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken Sie den Knopf wenn es ganz oben wird."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrieren von Z. Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Klicken Sie den Knopf wenn es ganz oben wird."
MSG_MOVE_E "Extruder"
MSG_MOVE_X "Bewege X"
MSG_MOVE_Y "Bewege Y"
MSG_MOVE_Z "Bewege Z"
MSG_NEW_FIRMWARE_AVAILABLE "Neue Firmware Version verfuegbar:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Bitte aktualisieren."
MSG_NO "Nein"
MSG_NO_CARD "Keine SD Karte"
MSG_NO_MOVE "Keine Bewegung."
MSG_NOT_COLOR "Farbe unklar"
MSG_NOT_LOADED "Fil. nicht geladen"
MSG_NOZZLE "Duese"
MSG_NOZZLE1 "Duese2"
MSG_NOZZLE2 "Duese3"
MSG_OK "ok"
MSG_PAPER "Legen ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier einklemmt, Drucker sofort ausschalten"
MSG_PAUSE_PRINT "Druck unterbrech."
MSG_PICK_Z "Waehle Abdruck"
MSG_PID_EXTRUDER "PID Kalibrierung"
MSG_PID_FINISHED "PID Kalib. fertig"
MSG_PID_RUNNING "PID Kalib."
MSG_PINDA_NOT_CALIBRATED "Temperatur wurde nicht kalibriert"
MSG_PINDA_PREHEAT "PINDA erwaermen"
MSG_PLA_FILAMENT_LOADED "Ist PLA Filament geladen?"
MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA "Bitte laden Sie zuerst PLA Filament."
MSG_PLEASE_WAIT "Bitte warten"
MSG_POWERUP "Einschalten"
MSG_PREHEAT "Vorwaermen"
MSG_PREHEAT_NOZZLE "Duese Vorwaermen"
MSG_PREPARE_FILAMENT "Filam. bereithalten"
MSG_PRESS "und Knopf druecken"
MSG_PRINT_ABORTED "Druck abgebrochen"
MSG_PRINT_PAUSED "Druck pausiert"
MSG_PRUSA3D "prusa3d.com"
MSG_PRUSA3D_FORUM "forum.prusa3d.com"
MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
MSG_REBOOT "Zum Uebernehmen "
MSG_RECTRACT "Retract"
MSG_REFRESH "\xF8" "Erneuern"
MSG_RESEND "Wiederholen: "
MSG_RESTORE_FAILSAFE "Standardwerte setzen"
MSG_RESUME_PRINT "Fortsetzen"
MSG_RESUMING "Druck fortgesetzt"
MSG_RESUMING_PRINT "Druck weitergehen"
MSG_RIGHT "Rechts:"
MSG_SD_CANT_ENTER_SUBDIR "Zugangsproblem Unterverzeichnis: "
MSG_SD_CANT_OPEN_SUBDIR "Kann Unterverz. nicht oeffnen"
MSG_SD_CARD_OK "SD Karte ok"
MSG_SD_ERR_WRITE_TO_FILE "Fehler beim Schreiben in Datei"
MSG_SD_FILE_OPENED "Datei geoeffnet: "
MSG_SD_FILE_SELECTED "Datei ausgewaehlt"
MSG_SD_INIT_FAIL "SD Init fehlerhaft"
MSG_SD_INSERTED "SD eingesetzt"
MSG_SD_NOT_PRINTING "Kein SD Print"
MSG_SD_OPEN_FILE_FAIL "Fehler beim Oeffnen der Datei: "
MSG_SD_OPENROOT_FAIL "Zugriff auf Basisverzeichnis misslungen"
MSG_SD_PRINTING_BYTE "SD printing byte "
MSG_SD_REMOVED "SD entfernt "
MSG_SD_VOL_INIT_FAIL "Dateisystem Init fehlerhaft"
MSG_SD_WORKDIR_FAIL "Oeffnen Arbeitsverzeichnis misslungen"
MSG_SD_WRITE_TO_FILE "Schreiben der Datei: "
MSG_SELFTEST "Selbsttest "
MSG_SELFTEST_BEDHEATER "Bett / Heater"
MSG_SELFTEST_COOLING_FAN "Vorderer Luefter?"
MSG_SELFTEST_ENDSTOP "Endstop"
MSG_SELFTEST_ENDSTOP_NOTHIT "Ende nicht getrof."
MSG_SELFTEST_ENDSTOPS "Endschalter"
MSG_SELFTEST_ERROR "Selbtest Fehler!"
MSG_SELFTEST_EXTRUDER_FAN "Linker Luefter?"
MSG_SELFTEST_FAILED "Selbsttest misslung."
MSG_SELFTEST_FAN "Lueftertest"
MSG_SELFTEST_FAN_NO "Dreht nicht"
MSG_SELFTEST_FAN_YES "Dreht"
MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
MSG_SELFTEST_CHECK_ALLCORRECT "Alles richtig "
MSG_SELFTEST_CHECK_BED "Pruefe Bett "
MSG_SELFTEST_CHECK_ENDSTOPS "Pruefe Endschalter "
MSG_SELFTEST_CHECK_HOTEND "Pruefe Duese"
MSG_SELFTEST_CHECK_X "Pruefe X Achse "
MSG_SELFTEST_CHECK_Y "Pruefe Y Achse "
MSG_SELFTEST_CHECK_Z "Pruefe Z Achse "
MSG_SELFTEST_MOTOR "Motor"
MSG_SELFTEST_NOTCONNECTED "Nicht angeschlossen"
MSG_SELFTEST_OK "Selbsttest OK"
MSG_SELFTEST_PLEASECHECK "Bitte pruefe:"
MSG_SELFTEST_START "Selbsttest start "
MSG_SELFTEST_WIRINGERROR "Verdrahtungfehler"
MSG_SERIAL_ERROR_MENU_STRUCTURE "Menuestruktur fehlerhaft"
MSG_SET_HOME_OFFSETS "Abstand vom Ursprung einstellen"
MSG_SET_ORIGIN "Ursprung einstellen"
MSG_SET_TEMPERATURE "Temp. einsetzen"
MSG_SETTINGS "Einstellungen"
MSG_SEVERE_SKEW "Schwerer Schr.:"
MSG_SHOW_END_STOPS "Endschalter Stat."
MSG_SILENT_MODE_OFF "Mode [Hohe Leist]"
MSG_SILENT_MODE_ON "Mode [leise]"
MSG_SLIGHT_SKEW "Leichter Schr.:"
MSG_SPEED "Geschwindigkeit"
MSG_STATISTICS "Statistiken "
MSG_STATS_FILAMENTUSED "Filamentverbrauch:"
MSG_STATS_PRINTTIME "Druckzeit: "
MSG_STATS_TOTALFILAMENT "Gesamtfilament:"
MSG_STATS_TOTALPRINTTIME "Totale Druckzeit:"
MSG_STEPPER_TOO_HIGH "Schrittrate zu hoch"
MSG_STOP_PRINT "Druck abbrechen"
MSG_STOPPED "GESTOPPT. "
MSG_STORE_EPROM "Abspeichern"
MSG_SUPPORT "Support"
MSG_SWITCH_PS_OFF "Netzteil AUS"
MSG_SWITCH_PS_ON "Netzteil EIN"
MSG_TAKE_EFFECT "Drucker neu starten"
MSG_TEMP_CALIBRATION "Temp Kalib. "
MSG_TEMP_CALIBRATION_DONE "Temp. Kalibrierung fertig. Klicken um weiter zu gehen."
MSG_TEMP_CALIBRATION_OFF "Temp. Kal. [OFF]"
MSG_TEMP_CALIBRATION_ON "Temp. Kal. [ON]"
MSG_TEMPERATURE "Temperatur"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD Karte [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD Karte [FlashAir]"
MSG_TUNE "Feineinstellung"
MSG_UNLOAD_ALL "Alles entladen"
MSG_UNLOAD_FILAMENT "Filament entladen"
MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
MSG_UNLOADING_FILAMENT "Filament auswerfen"
MSG_USB_PRINTING "Drucken ueber USB"
MSG_USED "Beim Druck benutzte"
MSG_USERWAIT "Warte auf user..."
MSG_V2_CALIBRATION "Erste-Schicht Kal"
MSG_VOLUMETRIC "Filament"
MSG_VOLUMETRIC_ENABLED "E in mm3"
MSG_WAITING_TEMP "Warten auf Abkuehlung von Heater und Bett."
MSG_WATCH "Information"
MSG_WIZARD "Wizard"
MSG_WIZARD_CALIBRATION_FAILED "Bitte ueberpruefen Sie unser Handbuch und beheben Sie das Problem. Fahren Sie dann mit dem Assistenten fort, indem Sie den Drucker neu starten."
MSG_WIZARD_CLEAN_HEATBED "Bitte reinigen Sie das Heizbett und druecken Sie dann den Knopf."
MSG_WIZARD_DONE "Alles wurde getan. Viel Spass beim Drucken!"
MSG_WIZARD_FILAMENT_LOADED "Ist das Filament geladen?"
MSG_WIZARD_HEATING "Vorheizen der Duese. Bitte warten."
MSG_WIZARD_INSERT_CORRECT_FILAMENT "Bitte laden Sie PLA-Filament und fahren Sie mit dem Assistenten fort, indem Sie den Drucker neu starten."
MSG_WIZARD_LOAD_FILAMENT "Fuehren Sie bitte PLA Filament in den Extruder und bestaetigen Sie den Knopf um es zu laden."
MSG_WIZARD_PLA_FILAMENT "Ist es wirklich PLA Filament?"
MSG_WIZARD_QUIT "Sie koennen immer den Asistenten im Menu neu aufrufen: Kalibrierung -> Assistant"
MSG_WIZARD_REPEAT_V2_CAL "Moechten Sie den letzten Schritt wiederholen um den Abstand zwischen Duese und Druckbett neu einzustellen?"
MSG_WIZARD_RERUN "Der laufende Assistent loescht die aktuelle Kalibrierergebnisse und wird von Anfang an beginnen. Fortsetzen?"
MSG_WIZARD_SELFTEST "Zunaechst fuehre ich den Selbsttest durch um die haeufigsten Probleme bei der Aufbau zu ueberpruefen."
MSG_WIZARD_V2_CAL "Jetzt werde ich den Abstand zwischen Duesenspitze und Druckbett kalibrieren."
MSG_WIZARD_V2_CAL_2 "Ich werde jetzt erste Linie drucken. Waehrend des Druckes koennen Sie die Duese allmaehlich senken indem Sie den Knopf drehen, bis Sie die optimale Hoehe erreichen. Ueberpruefen Sie die Bilder in unserem Handbuch im Kapitel Kalibrierung"
MSG_WIZARD_WELCOME "Hallo, ich bin dein Original Prusa i3 Drucker. Moechten Sie meine Hilfe durch den Setup-Prozess?"
MSG_WIZARD_WILL_PREHEAT "Jetzt werde ich die Duese fuer PLA vorheizen. "
MSG_WIZARD_XYZ_CAL "Ich werde jetzt die XYZ-Kalibrierung durchfuehren. Es wird ca. 12 Minuten dauern"
MSG_WIZARD_Z_CAL "Ich werde jetzt die Z Kalibrierung durchfuehren."
MSG_XYZ_DETAILS "XYZ Kal. Details"
MSG_Y_DISTANCE_FROM_MIN "Y Entfernung vom min"
MSG_YES "Ja"
WELCOME_MSG CUSTOM_MENDEL_NAME " bereit."

373
lang_upgrade/msgs_en.txt Normal file
View file

@ -0,0 +1,373 @@
MSG_ADJUSTZ c=0 r=0 "Auto adjust Z?"
MSG_ALL c=19 r=1 "All"
MSG_AUTO_HOME c=0 r=0 "Auto home"
MSG_AUTO_MODE_ON c=0 r=0 "Mode [auto power]"
MSG_AUTOLOAD_FILAMENT c=17 r=0 "AutoLoad filament"
MSG_AUTOLOADING_ENABLED c=20 r=4 "Autoloading filament is active, just press the knob and insert filament..."
MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 "Autoloading filament available only when filament sensor is turned on..."
MSG_BABYSTEP_X c=0 r=0 "Babystep X"
MSG_BABYSTEP_Y c=0 r=0 "Babystep Y"
MSG_BABYSTEP_Z c=0 r=0 "Live adjust Z"
MSG_BABYSTEP_Z_NOT_SET c=20 r=12 "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
MSG_BABYSTEPPING_X c=0 r=0 "Babystepping X"
MSG_BABYSTEPPING_Y c=0 r=0 "Babystepping Y"
MSG_BABYSTEPPING_Z c=20 r=0 "Adjusting Z"
MSG_BED c=0 r=0 "Bed"
MSG_BED_CORRECTION_FRONT c=14 r=1 "Front side[um]"
MSG_BED_CORRECTION_LEFT c=14 r=1 "Left side [um]"
MSG_BED_CORRECTION_MENU c=0 r=0 "Bed level correct"
MSG_BED_CORRECTION_REAR c=14 r=1 "Rear side [um]"
MSG_BED_CORRECTION_RESET c=0 r=0 "Reset"
MSG_BED_CORRECTION_RIGHT c=14 r=1 "Right side[um]"
MSG_BED_DONE c=0 r=0 "Bed done"
MSG_BED_HEATING c=0 r=0 "Bed Heating"
MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0 "Heating disabled by safety timer."
MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 "Bed leveling failed. Sensor triggered too high. Waiting for reset."
MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration failed. Front calibration points not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration failed. Left front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration failed. Right front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 "XYZ calibration failed. Please consult the manual."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 "XYZ calibration failed. Bed calibration point was not found."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 "XYZ calibration all right. Skew will be corrected automatically."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration compromised. Front calibration points not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration compromised. Left front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration compromised. Right front calibration point not reachable."
MSG_BEGIN_FILE_LIST c=0 r=0 "Begin file list"
MSG_CALIBRATE_BED c=0 r=0 "Calibrate XYZ"
MSG_CALIBRATE_BED_RESET c=0 r=0 "Reset XYZ calibr."
MSG_CALIBRATE_E c=20 r=1 "Calibrate E"
MSG_CALIBRATE_PINDA c=17 r=1 "Calibrate"
MSG_CALIBRATE_Z_AUTO c=20 r=2 "Calibrating Z"
MSG_CALIBRATION_PINDA_MENU c=17 r=1 "Temp. calibration"
MSG_CARD_MENU c=0 r=0 "Print from SD"
MSG_CLEAN_NOZZLE_E c=20 r=8 "E calibration finished. Please clean the nozzle. Click when done."
MSG_CNG_SDCARD c=0 r=0 "Change SD card"
MSG_CONFIGURATION_VER c=0 r=0 " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 "Are left and right Z~carriages all up?"
MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 "Please clean the nozzle for calibration. Click when done."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ c=20 r=8 "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
MSG_CONTROL c=0 r=0 "Control"
MSG_COOLDOWN c=0 r=0 "Cooldown"
MSG_CORRECTLY c=20 r=0 "Changed correctly?"
MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
MSG_CRASH_DETECTED c=20 r=1 "Crash detected."
MSG_CRASH_DETECTED2 c=20 r=2 "Crash detected. Continue printing?"
MSG_CRASHDETECT_NA c=0 r=0 "Crash det. [N/A]"
MSG_CRASHDETECT_OFF c=0 r=0 "Crash det. [off]"
MSG_CRASHDETECT_ON c=0 r=0 "Crash det. [on]"
MSG_CURRENT c=19 r=1 "Current"
MSG_DATE c=17 r=1 "Date:"
MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 "Old settings found. Default PID, Esteps etc. will be set."
MSG_DISABLE_STEPPERS c=0 r=0 "Disable steppers"
MSG_DWELL c=0 r=0 "Sleep..."
MSG_E_CAL_KNOB c=20 r=8 "Rotate knob until mark reaches extruder body. Click when done."
MSG_END_FILE_LIST c=0 r=0 "End file list"
MSG_ENDSTOP_HIT c=0 r=0 "TRIGGERED"
MSG_ENDSTOP_OPEN c=0 r=0 "open"
MSG_ENDSTOPS_HIT c=0 r=0 "endstops hit: "
MSG_Enqueing c=0 r=0 "enqueing \""
MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0 " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH c=0 r=0 "checksum mismatch, Last Line: "
MSG_ERR_KILLED c=0 r=0 "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM c=0 r=0 "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS c=0 r=0 "No thermistors - no temperature"
MSG_ERR_STOPPED c=0 r=0 "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR c=0 r=0 "ERROR:"
MSG_EXTRUDER c=17 r=1 "Extruder"
MSG_EXTRUDER_1 c=17 r=1 "Extruder 1"
MSG_EXTRUDER_2 c=17 r=1 "Extruder 2"
MSG_EXTRUDER_3 c=17 r=1 "Extruder 3"
MSG_EXTRUDER_4 c=17 r=1 "Extruder 4"
MSG_EXTRUDER_CORRECTION c=9 r=0 "E-correct"
MSG_EXTRUDER_CORRECTION_OFF c=6 r=0 " [off"
MSG_FACTOR c=0 r=0 " \002 Fact"
MSG_FAN_SPEED c=14 r=0 "Fan speed"
MSG_FANS_CHECK_OFF c=17 r=1 "Fans check [off]"
MSG_FANS_CHECK_ON c=17 r=1 "Fans check [on]"
MSG_FIL_ADJUSTING c=20 r=4 "Adjusting filaments. Please wait."
MSG_FILAMENT_CLEAN c=20 r=2 "Filament extruding & with correct color?"
MSG_FILAMENT_LOADING_T0 c=20 r=4 "Insert filament into extruder 1. Click when done."
MSG_FILAMENT_LOADING_T1 c=20 r=4 "Insert filament into extruder 2. Click when done."
MSG_FILAMENT_LOADING_T2 c=20 r=4 "Insert filament into extruder 3. Click when done."
MSG_FILAMENT_LOADING_T3 c=20 r=4 "Insert filament into extruder 4. Click when done."
MSG_FILAMENT_SENSOR c=20 r=0 "Filament sensor"
MSG_FILAMENTCHANGE c=0 r=0 "Change filament"
MSG_FILE_CNT c=20 r=4 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
MSG_FILE_INCOMPLETE c=20 r=2 "File incomplete. Continue anyway?"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 "Iteration "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Searching bed calibration point"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
MSG_FINISHING_MOVEMENTS c=20 r=1 "Finishing movements"
MSG_FLOW c=0 r=0 "Flow"
MSG_FLOW0 c=0 r=0 "Flow 0"
MSG_FLOW1 c=0 r=0 "Flow 1"
MSG_FLOW2 c=0 r=0 "Flow 2"
MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
MSG_FORCE_SELFTEST c=20 r=8 "Selftest will be run to calibrate accurate sensorless rehoming."
MSG_FREE_MEMORY c=0 r=0 " Free Memory: "
MSG_FSENS_AUTOLOAD_NA c=17 r=1 "F. autoload [N/A]"
MSG_FSENS_AUTOLOAD_OFF c=17 r=1 "F. autoload [off]"
MSG_FSENS_AUTOLOAD_ON c=17 r=1 "F. autoload [on]"
MSG_FSENS_NOT_RESPONDING c=20 r=4 "ERROR: Filament sensor is not responding, please check connection."
MSG_FSENSOR_NA c=0 r=0 "Fil. sensor [N/A]"
MSG_FSENSOR_OFF c=0 r=0 "Fil. sensor [off]"
MSG_FSENSOR_ON c=0 r=0 "Fil. sensor [on]"
MSG_FW_VERSION_ALPHA c=20 r=8 "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
MSG_FW_VERSION_BETA c=20 r=8 "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
MSG_FW_VERSION_RC c=20 r=8 "This firmware version is release candidate. Some of the features may not work properly."
MSG_FW_VERSION_UNKNOWN c=20 r=8 "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
MSG_HEATING c=0 r=0 "Heating"
MSG_HEATING_COMPLETE c=20 r=0 "Heating done."
MSG_HOMEYZ c=0 r=0 "Calibrate Z"
MSG_HOMEYZ_DONE c=0 r=0 "Calibration done"
MSG_HOMEYZ_PROGRESS c=0 r=0 "Calibrating Z"
MSG_CHANGE_EXTR c=20 r=1 "Change extruder"
MSG_CHANGE_SUCCESS c=0 r=0 "Change success!"
MSG_CHANGED_BOTH c=20 r=4 "Warning: both printer type and motherboard type changed."
MSG_CHANGED_MOTHERBOARD c=20 r=4 "Warning: motherboard type changed."
MSG_CHANGED_PRINTER c=20 r=4 "Warning: printer type changed."
MSG_CHANGING_FILAMENT c=20 r=0 "Changing filament!"
MSG_CHECK_IDLER c=20 r=4 "Please open idler and remove filament manually."
MSG_CHOOSE_EXTRUDER c=20 r=1 "Choose extruder:"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Improving bed calibration point"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
MSG_INFO_EXTRUDER c=15 r=1 "Extruder info"
MSG_INFO_FILAMENT_XDIFF c=11 r=1 "Fil. Xd:"
MSG_INFO_FILAMENT_YDIFF c=11 r=1 "Fil. Ydiff:"
MSG_INFO_NOZZLE_FAN c=11 r=1 "Nozzle FAN:"
MSG_INFO_PRINT_FAN c=11 r=1 "Print FAN: "
MSG_INIT_SDCARD c=0 r=0 "Init. SD card"
MSG_INSERT_FILAMENT c=20 r=0 "Insert filament"
MSG_KILLED c=0 r=0 "KILLED. "
MSG_LANGUAGE_NAME c=0 r=0 "English"
MSG_LANGUAGE_SELECT c=0 r=0 "Select language"
MSG_LEFT c=12 r=1 "Left:"
MSG_LOAD_ALL c=0 r=0 "Load all"
MSG_LOAD_EPROM c=0 r=0 "Load memory"
MSG_LOAD_FILAMENT c=17 r=0 "Load filament"
MSG_LOAD_FILAMENT_1 c=17 r=0 "Load filament 1"
MSG_LOAD_FILAMENT_2 c=17 r=0 "Load filament 2"
MSG_LOAD_FILAMENT_3 c=17 r=0 "Load filament 3"
MSG_LOAD_FILAMENT_4 c=17 r=0 "Load filament 4"
MSG_LOADING_COLOR c=0 r=0 "Loading color"
MSG_LOADING_FILAMENT c=20 r=0 "Loading filament"
MSG_LOOSE_PULLEY c=20 r=1 "Loose pulley"
MSG_M104_INVALID_EXTRUDER c=0 r=0 "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER c=0 r=0 "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER c=0 r=0 "M109 Invalid extruder "
MSG_M117_V2_CALIBRATION c=25 r=1 "M117 First layer cal."
MSG_M119_REPORT c=0 r=0 "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER c=0 r=0 "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER c=0 r=0 "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER c=0 r=0 "M221 Invalid extruder "
MSG_MAIN c=0 r=0 "Main"
MSG_MARK_FIL c=20 r=8 "Mark filament 100mm from extruder body. Click when done."
MSG_MAX c=0 r=0 " \002 Max"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0 "Measuring reference height of calibration point"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0 " of 9"
MSG_MEASURED_OFFSET c=0 r=0 "[0;0] point offset"
MSG_MEASURED_SKEW c=15 r=1 "Measured skew:"
MSG_MENU_BELT_STATUS c=15 r=1 "Belt status"
MSG_MENU_CALIBRATION c=0 r=0 "Calibration"
MSG_MENU_TEMPERATURES c=15 r=1 "Temperatures"
MSG_MENU_VOLTAGES c=15 r=1 "Voltages"
MSG_MESH_BED_LEVELING c=0 r=0 "Mesh Bed Leveling"
MSG_MIN c=0 r=0 " \002 Min"
MSG_MOTION c=0 r=0 "Motion"
MSG_MOVE_AXIS c=0 r=0 "Move axis"
MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
MSG_MOVE_E c=0 r=0 "Extruder"
MSG_MOVE_X c=0 r=0 "Move X"
MSG_MOVE_Y c=0 r=0 "Move Y"
MSG_MOVE_Z c=0 r=0 "Move Z"
MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 "New firmware version available:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0 "Please upgrade."
MSG_NO c=0 r=0 "No"
MSG_NO_CARD c=0 r=0 "No SD card"
MSG_NO_MOVE c=0 r=0 "No move."
MSG_NOT_COLOR c=0 r=0 "Color not correct"
MSG_NOT_LOADED c=19 r=0 "Filament not loaded"
MSG_NOZZLE c=0 r=0 "Nozzle"
MSG_NOZZLE1 c=0 r=0 "Nozzle2"
MSG_NOZZLE2 c=0 r=0 "Nozzle3"
MSG_OK c=0 r=0 "ok"
MSG_PAPER c=20 r=8 "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
MSG_PAUSE_PRINT c=0 r=0 "Pause print"
MSG_PICK_Z c=0 r=0 "Pick print"
MSG_PID_EXTRUDER c=17 r=1 "PID calibration"
MSG_PID_FINISHED c=20 r=1 "PID cal. finished"
MSG_PID_RUNNING c=20 r=1 "PID cal. "
MSG_PINDA_NOT_CALIBRATED c=20 r=4 "Temperature calibration has not been run yet"
MSG_PINDA_PREHEAT c=20 r=1 "PINDA Heating"
MSG_PLA_FILAMENT_LOADED c=20 r=2 "Is PLA filament loaded?"
MSG_PLACE_STEEL_SHEET c=20 r=4 "Please place steel sheet on heatbed."
MSG_PLANNER_BUFFER_BYTES c=0 r=0 " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA c=20 r=4 "Please load PLA filament first."
MSG_PLEASE_WAIT c=20 r=0 "Please wait"
MSG_POWERUP c=0 r=0 "PowerUp"
MSG_PREHEAT c=0 r=0 "Preheat"
MSG_PREHEAT_NOZZLE c=20 r=0 "Preheat the nozzle!"
MSG_PREPARE_FILAMENT c=20 r=1 "Prepare new filament"
MSG_PRESS c=20 r=0 "and press the knob"
MSG_PRESS_TO_PREHEAT c=20 r=4 "Press knob to preheat nozzle and continue."
MSG_PRESS_TO_UNLOAD c=20 r=4 "Please press the knob to unload filament"
MSG_PRINT_ABORTED c=20 r=0 "Print aborted"
MSG_PRINT_PAUSED c=20 r=1 "Print paused"
MSG_PRINTER_DISCONNECTED c=20 r=1 "Printer disconnected"
MSG_PRUSA3D c=0 r=0 "prusa3d.com"
MSG_PRUSA3D_FORUM c=0 r=0 "forum.prusa3d.com"
MSG_PRUSA3D_HOWTO c=0 r=0 "howto.prusa3d.com"
MSG_PULL_OUT_FILAMENT c=20 r=4 "Please pull out filament immediately"
MSG_REBOOT c=20 r=0 "Reboot the printer"
MSG_RECOVER_PRINT c=20 r=2 "Blackout occurred. Recover print?"
MSG_RECOVERING_PRINT c=20 r=1 "Recovering print "
MSG_RECTRACT c=0 r=0 "Rectract"
MSG_REFRESH c=0 r=0 "\xF8" "Refresh"
MSG_REMOVE_STEEL_SHEET c=20 r=4 "Please remove steel sheet from heatbed."
MSG_RESEND c=0 r=0 "Resend: "
MSG_RESTORE_FAILSAFE c=0 r=0 "Restore failsafe"
MSG_RESUME_PRINT c=0 r=0 "Resume print"
MSG_RESUMING c=0 r=0 "Resuming print"
MSG_RESUMING_PRINT c=20 r=1 "Resuming print"
MSG_RIGHT c=12 r=1 "Right:"
MSG_SD_CANT_ENTER_SUBDIR c=0 r=0 "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR c=0 r=0 "Cannot open subdir"
MSG_SD_CARD_OK c=0 r=0 "SD card ok"
MSG_SD_ERR_WRITE_TO_FILE c=0 r=0 "error writing to file"
MSG_SD_FILE_OPENED c=0 r=0 "File opened: "
MSG_SD_FILE_SELECTED c=0 r=0 "File selected"
MSG_SD_INIT_FAIL c=0 r=0 "SD init fail"
MSG_SD_INSERTED c=0 r=0 "Card inserted"
MSG_SD_NOT_PRINTING c=0 r=0 "Not SD printing"
MSG_SD_OPEN_FILE_FAIL c=0 r=0 "open failed, File: "
MSG_SD_OPENROOT_FAIL c=0 r=0 "openRoot failed"
MSG_SD_PRINTING_BYTE c=0 r=0 "SD printing byte "
MSG_SD_REMOVED c=0 r=0 "Card removed"
MSG_SD_VOL_INIT_FAIL c=0 r=0 "volume.init failed"
MSG_SD_WORKDIR_FAIL c=0 r=0 "workDir open failed"
MSG_SD_WRITE_TO_FILE c=0 r=0 "Writing to file: "
MSG_SECOND_SERIAL_OFF c=17 r=1 "RPi port [off]"
MSG_SECOND_SERIAL_ON c=17 r=1 "RPi port [on]"
MSG_SELFTEST c=0 r=0 "Selftest "
MSG_SELFTEST_AXIS c=0 r=0 "Axis"
MSG_SELFTEST_AXIS_LENGTH c=0 r=0 "Axis length"
MSG_SELFTEST_BEDHEATER c=0 r=0 "Bed / Heater"
MSG_SELFTEST_COOLING_FAN c=20 r=0 "Front print fan?"
MSG_SELFTEST_ENDSTOP c=0 r=0 "Endstop"
MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 "Endstop not hit"
MSG_SELFTEST_ENDSTOPS c=0 r=0 "Endstops"
MSG_SELFTEST_ERROR c=0 r=0 "Selftest error !"
MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 "Left hotend fan?"
MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0 "Extruder fan:"
MSG_SELFTEST_FAILED c=20 r=0 "Selftest failed "
MSG_SELFTEST_FAN c=20 r=0 "Fan test"
MSG_SELFTEST_FAN_NO c=19 r=0 "Not spinning"
MSG_SELFTEST_FAN_YES c=19 r=0 "Spinning"
MSG_SELFTEST_FANS c=0 r=0 "Front/left fans"
MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0 "Filament sensor:"
MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0 "Heater/Thermistor"
MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0 "All correct "
MSG_SELFTEST_CHECK_BED c=20 r=0 "Checking bed "
MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0 "Checking endstops"
MSG_SELFTEST_CHECK_FSENSOR c=20 r=0 "Checking sensors "
MSG_SELFTEST_CHECK_HOTEND c=20 r=0 "Checking hotend "
MSG_SELFTEST_CHECK_X c=20 r=0 "Checking X axis "
MSG_SELFTEST_CHECK_Y c=20 r=0 "Checking Y axis "
MSG_SELFTEST_CHECK_Z c=20 r=0 "Checking Z axis "
MSG_SELFTEST_MOTOR c=0 r=0 "Motor"
MSG_SELFTEST_NOTCONNECTED c=0 r=0 "Not connected"
MSG_SELFTEST_OK c=0 r=0 "Self test OK"
MSG_SELFTEST_PLEASECHECK c=0 r=0 "Please check :"
MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 "Print fan:"
MSG_SELFTEST_START c=20 r=0 "Self test start "
MSG_SELFTEST_SWAPPED c=0 r=0 "Swapped"
MSG_SELFTEST_WIRINGERROR c=0 r=0 "Wiring error"
MSG_SERIAL_ERROR_MENU_STRUCTURE c=0 r=0 "Error in menu structure"
MSG_SET_HOME_OFFSETS c=0 r=0 "Set home offsets"
MSG_SET_ORIGIN c=0 r=0 "Set origin"
MSG_SET_TEMPERATURE c=19 r=1 "Set temperature:"
MSG_SETTINGS c=0 r=0 "Settings"
MSG_SEVERE_SKEW c=15 r=1 "Severe skew:"
MSG_SHOW_END_STOPS c=17 r=1 "Show end stops"
MSG_SILENT_MODE_OFF c=0 r=0 "Mode [high power]"
MSG_SILENT_MODE_ON c=0 r=0 "Mode [silent]"
MSG_SLIGHT_SKEW c=15 r=1 "Slight skew:"
MSG_SORT_ALPHA c=17 r=1 "Sort: [Alphabet]"
MSG_SORT_NONE c=17 r=1 "Sort: [None]"
MSG_SORT_TIME c=17 r=1 "Sort: [Time]"
MSG_SORTING c=20 r=1 "Sorting files"
MSG_SPEED c=0 r=0 "Speed"
MSG_STACK_ERROR c=20 r=4 "Error - static memory has been overwritten"
MSG_STATISTICS c=0 r=0 "Statistics "
MSG_STATS_FILAMENTUSED c=20 r=0 "Filament used: "
MSG_STATS_PRINTTIME c=20 r=0 "Print time: "
MSG_STATS_TOTALFILAMENT c=20 r=0 "Total filament :"
MSG_STATS_TOTALPRINTTIME c=20 r=0 "Total print time :"
MSG_STEALTH_MODE_OFF c=0 r=0 "Mode [Normal]"
MSG_STEALTH_MODE_ON c=0 r=0 "Mode [Stealth]"
MSG_STEEL_SHEET_CHECK c=20 r=2 "Is steel sheet on heatbed?"
MSG_STEPPER_TIMER_OVERFLOW_ERROR c=20 r=4 "Error - stepper timer overflow"
MSG_STEPPER_TOO_HIGH c=0 r=0 "Steprate too high: "
MSG_STOP_PRINT c=0 r=0 "Stop print"
MSG_STOPPED c=0 r=0 "STOPPED. "
MSG_STORE_EPROM c=0 r=0 "Store memory"
MSG_SUPPORT c=0 r=0 "Support"
MSG_SWITCH_PS_OFF c=0 r=0 "Switch power off"
MSG_SWITCH_PS_ON c=0 r=0 "Switch power on"
MSG_TAKE_EFFECT c=20 r=0 " for take effect"
MSG_TEMP_CAL_FAILED c=20 r=8 "Temperature calibration failed"
MSG_TEMP_CAL_WARNING c=20 r=4 "Stable ambient temperature 21-26C is needed a rigid stand is required."
MSG_TEMP_CALIBRATION c=20 r=1 "Temp. cal. "
MSG_TEMP_CALIBRATION_DONE c=20 r=12 "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
MSG_TEMP_CALIBRATION_OFF c=20 r=1 "Temp. cal. [off]"
MSG_TEMP_CALIBRATION_ON c=20 r=1 "Temp. cal. [on]"
MSG_TEMPERATURE c=0 r=0 "Temperature"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 "SD card [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 "SD card [FlshAir]"
MSG_TUNE c=0 r=0 "Tune"
MSG_UNLOAD_ALL c=0 r=0 "Unload all"
MSG_UNLOAD_FILAMENT c=17 r=0 "Unload filament"
MSG_UNLOAD_FILAMENT_1 c=17 r=0 "Unload filament 1"
MSG_UNLOAD_FILAMENT_2 c=17 r=0 "Unload filament 2"
MSG_UNLOAD_FILAMENT_3 c=17 r=0 "Unload filament 3"
MSG_UNLOAD_FILAMENT_4 c=17 r=0 "Unload filament 4"
MSG_UNLOAD_SUCCESSFUL c=20 r=2 "Was filament unload successful?"
MSG_UNLOADING_FILAMENT c=20 r=1 "Unloading filament"
MSG_USB_PRINTING c=0 r=0 "USB printing "
MSG_USED c=19 r=1 "Used during print"
MSG_USERWAIT c=0 r=0 "Wait for user..."
MSG_V2_CALIBRATION c=17 r=1 "First layer cal."
MSG_VOLUMETRIC c=0 r=0 "Filament"
MSG_VOLUMETRIC_ENABLED c=0 r=0 "E in mm3"
MSG_WAITING_TEMP c=20 r=3 "Waiting for nozzle and bed cooling"
MSG_WAITING_TEMP_PINDA c=20 r=3 "Waiting for PINDA probe cooling"
MSG_WATCH c=0 r=0 "Info screen"
MSG_WIZARD c=17 r=1 "Wizard"
MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
MSG_WIZARD_CLEAN_HEATBED c=20 r=8 "Please clean heatbed and then press the knob."
MSG_WIZARD_DONE c=20 r=8 "All is done. Happy printing!"
MSG_WIZARD_FILAMENT_LOADED c=20 r=2 "Is filament loaded?"
MSG_WIZARD_HEATING c=20 r=3 "Preheating nozzle. Please wait."
MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 "Please load PLA filament and then resume Wizard by rebooting the printer."
MSG_WIZARD_LOAD_FILAMENT c=20 r=8 "Please insert PLA filament to the extruder, then press knob to load it."
MSG_WIZARD_PLA_FILAMENT c=20 r=2 "Is it PLA filament?"
MSG_WIZARD_QUIT c=20 r=8 "You can always resume the Wizard from Calibration -> Wizard."
MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
MSG_WIZARD_RERUN c=20 r=7 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
MSG_WIZARD_SELFTEST c=20 r=8 "First, I will run the selftest to check most common assembly problems."
MSG_WIZARD_V2_CAL c=20 r=8 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
MSG_WIZARD_V2_CAL_2 c=20 r=12 "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
MSG_WIZARD_WELCOME c=20 r=7 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
MSG_WIZARD_WILL_PREHEAT c=20 r=4 "Now I will preheat nozzle for PLA."
MSG_WIZARD_XYZ_CAL c=20 r=8 "I will run xyz calibration now. It will take approx. 12 mins."
MSG_WIZARD_Z_CAL c=20 r=8 "I will run z calibration now."
MSG_XYZ_DETAILS c=19 r=1 "XYZ cal. details"
MSG_Y_DISTANCE_FROM_MIN c=20 r=1 "Y distance from min:"
MSG_YES c=0 r=0 "Yes"
WELCOME_MSG c=20 r=0 CUSTOM_MENDEL_NAME " ready."

30
lang_upgrade/msgs_en_unused.txt Normal file
View file

@ -0,0 +1,30 @@
MSG_BABYSTEP_X c=0 r=0 "Babystep X"
MSG_BABYSTEP_Y c=0 r=0 "Babystep Y"
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ c=20 r=8 "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
MSG_CONTROL c=0 r=0 "Control"
MSG_CRASH_DETECTED2 c=20 r=2 "Crash detected. Continue printing?"
MSG_FIL_ADJUSTING c=20 r=4 "Adjusting filaments. Please wait."
MSG_FLOW0 c=0 r=0 "Flow 0"
MSG_FLOW1 c=0 r=0 "Flow 1"
MSG_FLOW2 c=0 r=0 "Flow 2"
MSG_FW_VERSION_RC c=20 r=8 "This firmware version is release candidate. Some of the features may not work properly."
MSG_INFO_FILAMENT_XDIFF c=11 r=1 "Fil. Xd:"
MSG_INFO_FILAMENT_YDIFF c=11 r=1 "Fil. Ydiff:"
MSG_LANGUAGE_NAME c=0 r=0 "English"
MSG_LOAD_EPROM c=0 r=0 "Load memory"
MSG_MOTION c=0 r=0 "Motion"
MSG_REBOOT c=20 r=0 "Reboot the printer"
MSG_RECTRACT c=0 r=0 "Rectract"
MSG_RESTORE_FAILSAFE c=0 r=0 "Restore failsafe"
MSG_SD_NOT_PRINTING c=0 r=0 "Not SD printing"
MSG_SERIAL_ERROR_MENU_STRUCTURE c=0 r=0 "Error in menu structure"
MSG_SET_HOME_OFFSETS c=0 r=0 "Set home offsets"
MSG_SET_ORIGIN c=0 r=0 "Set origin"
MSG_STEPPER_TIMER_OVERFLOW_ERROR c=20 r=4 "Error - stepper timer overflow"
MSG_STORE_EPROM c=0 r=0 "Store memory"
MSG_SWITCH_PS_OFF c=0 r=0 "Switch power off"
MSG_SWITCH_PS_ON c=0 r=0 "Switch power on"
MSG_TAKE_EFFECT c=20 r=0 " for take effect"
MSG_USB_PRINTING c=0 r=0 "USB printing "
MSG_VOLUMETRIC c=0 r=0 "Filament"
MSG_VOLUMETRIC_ENABLED c=0 r=0 "E in mm3"

96
lang_upgrade/msgs_en_used_more.txt Normal file
View file

@ -0,0 +1,96 @@
MSG_ALL c=19 r=1 "All"
MSG_AUTO_HOME c=0 r=0 "Auto home"
MSG_AUTO_MODE_ON c=0 r=0 "Mode [auto power]"
MSG_BABYSTEP_Z c=0 r=0 "Live adjust Z"
MSG_BABYSTEP_Z_NOT_SET c=20 r=12 "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
MSG_BED c=0 r=0 "Bed"
MSG_BED_DONE c=0 r=0 "Bed done"
MSG_BED_HEATING c=0 r=0 "Bed Heating"
MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 "XYZ calibration failed. Please consult the manual."
MSG_CALIBRATE_Z_AUTO c=20 r=2 "Calibrating Z"
MSG_CARD_MENU c=0 r=0 "Print from SD"
MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 "Please clean the nozzle for calibration. Click when done."
MSG_COOLDOWN c=0 r=0 "Cooldown"
MSG_CRASH_DETECTED c=20 r=1 "Crash detected."
MSG_CRASHDETECT_NA c=0 r=0 "Crash det. [N/A]"
MSG_CRASHDETECT_OFF c=0 r=0 "Crash det. [off]"
MSG_CRASHDETECT_ON c=0 r=0 "Crash det. [on]"
MSG_ENDSTOP_HIT c=0 r=0 "TRIGGERED"
MSG_ENDSTOP_OPEN c=0 r=0 "open"
MSG_ENDSTOPS_HIT c=0 r=0 "endstops hit: "
MSG_Enqueing c=0 r=0 "enqueing \""
MSG_ERR_STOPPED c=0 r=0 "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR c=0 r=0 "ERROR:"
MSG_EXTRUDER c=17 r=1 "Extruder"
MSG_FAN_SPEED c=14 r=0 "Fan speed"
MSG_FILAMENT_CLEAN c=20 r=2 "Filament extruding & with correct color?"
MSG_FILAMENT_LOADING_T0 c=20 r=4 "Insert filament into extruder 1. Click when done."
MSG_FILAMENT_LOADING_T1 c=20 r=4 "Insert filament into extruder 2. Click when done."
MSG_FILAMENT_LOADING_T2 c=20 r=4 "Insert filament into extruder 3. Click when done."
MSG_FILAMENT_LOADING_T3 c=20 r=4 "Insert filament into extruder 4. Click when done."
MSG_FILAMENTCHANGE c=0 r=0 "Change filament"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Searching bed calibration point"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
MSG_FINISHING_MOVEMENTS c=20 r=1 "Finishing movements"
MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
MSG_FSENS_AUTOLOAD_NA c=17 r=1 "F. autoload [N/A]"
MSG_FSENSOR_OFF c=0 r=0 "Fil. sensor [off]"
MSG_FSENSOR_ON c=0 r=0 "Fil. sensor [on]"
MSG_HEATING c=0 r=0 "Heating"
MSG_HEATING_COMPLETE c=20 r=0 "Heating done."
MSG_HOMEYZ c=0 r=0 "Calibrate Z"
MSG_CHOOSE_EXTRUDER c=20 r=1 "Choose extruder:"
MSG_LOAD_FILAMENT c=17 r=0 "Load filament"
MSG_LOADING_FILAMENT c=20 r=0 "Loading filament"
MSG_M117_V2_CALIBRATION c=25 r=1 "M117 First layer cal."
MSG_MAIN c=0 r=0 "Main"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0 "Measuring reference height of calibration point"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0 " of 9"
MSG_MENU_CALIBRATION c=0 r=0 "Calibration"
MSG_NO c=0 r=0 "No"
MSG_NOZZLE c=0 r=0 "Nozzle"
MSG_OK c=0 r=0 "ok"
MSG_PAPER c=20 r=8 "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
MSG_PLACE_STEEL_SHEET c=20 r=4 "Please place steel sheet on heatbed."
MSG_PLEASE_WAIT c=20 r=0 "Please wait"
MSG_POWERUP c=0 r=0 "PowerUp"
MSG_PREHEAT_NOZZLE c=20 r=0 "Preheat the nozzle!"
MSG_PRESS_TO_UNLOAD c=20 r=4 "Please press the knob to unload filament"
MSG_PRINT_ABORTED c=20 r=0 "Print aborted"
MSG_PULL_OUT_FILAMENT c=20 r=4 "Please pull out filament immediately"
MSG_RECOVER_PRINT c=20 r=2 "Blackout occurred. Recover print?"
MSG_REFRESH c=0 r=0 "\xF8" "Refresh"
MSG_REMOVE_STEEL_SHEET c=20 r=4 "Please remove steel sheet from heatbed."
MSG_SD_ERR_WRITE_TO_FILE c=0 r=0 "error writing to file"
MSG_SD_OPEN_FILE_FAIL c=0 r=0 "open failed, File: "
MSG_SD_WORKDIR_FAIL c=0 r=0 "workDir open failed"
MSG_SELFTEST_COOLING_FAN c=20 r=0 "Front print fan?"
MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 "Left hotend fan?"
MSG_SELFTEST_FAILED c=20 r=0 "Selftest failed "
MSG_SELFTEST_FAN c=20 r=0 "Fan test"
MSG_SELFTEST_FAN_NO c=19 r=0 "Not spinning"
MSG_SELFTEST_FAN_YES c=19 r=0 "Spinning"
MSG_SELFTEST_CHECK_BED c=20 r=0 "Checking bed "
MSG_SELFTEST_CHECK_FSENSOR c=20 r=0 "Checking sensors "
MSG_SELFTEST_MOTOR c=0 r=0 "Motor"
MSG_SELFTEST_WIRINGERROR c=0 r=0 "Wiring error"
MSG_SETTINGS c=0 r=0 "Settings"
MSG_SILENT_MODE_OFF c=0 r=0 "Mode [high power]"
MSG_SILENT_MODE_ON c=0 r=0 "Mode [silent]"
MSG_STEALTH_MODE_OFF c=0 r=0 "Mode [Normal]"
MSG_STEALTH_MODE_ON c=0 r=0 "Mode [Stealth]"
MSG_STEEL_SHEET_CHECK c=20 r=2 "Is steel sheet on heatbed?"
MSG_STOP_PRINT c=0 r=0 "Stop print"
MSG_STOPPED c=0 r=0 "STOPPED. "
MSG_TEMP_CALIBRATION c=20 r=1 "Temp. cal. "
MSG_TEMP_CALIBRATION_DONE c=20 r=12 "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
MSG_UNLOAD_FILAMENT c=17 r=0 "Unload filament"
MSG_UNLOADING_FILAMENT c=20 r=1 "Unloading filament"
MSG_WATCH c=0 r=0 "Info screen"
MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
MSG_WIZARD_DONE c=20 r=8 "All is done. Happy printing!"
MSG_WIZARD_HEATING c=20 r=3 "Preheating nozzle. Please wait."
MSG_WIZARD_QUIT c=20 r=8 "You can always resume the Wizard from Calibration -> Wizard."
MSG_YES c=0 r=0 "Yes"
WELCOME_MSG c=20 r=0 CUSTOM_MENDEL_NAME " ready."

247
lang_upgrade/msgs_en_used_once.txt Normal file
View file

@ -0,0 +1,247 @@
MSG_ADJUSTZ c=0 r=0 "Auto adjust Z?"
MSG_AUTOLOAD_FILAMENT c=17 r=0 "AutoLoad filament"
MSG_AUTOLOADING_ENABLED c=20 r=4 "Autoloading filament is active, just press the knob and insert filament..."
MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 "Autoloading filament available only when filament sensor is turned on..."
MSG_BABYSTEPPING_X c=0 r=0 "Babystepping X"
MSG_BABYSTEPPING_Y c=0 r=0 "Babystepping Y"
MSG_BABYSTEPPING_Z c=20 r=0 "Adjusting Z"
MSG_BED_CORRECTION_FRONT c=14 r=1 "Front side[um]"
MSG_BED_CORRECTION_LEFT c=14 r=1 "Left side [um]"
MSG_BED_CORRECTION_MENU c=0 r=0 "Bed level correct"
MSG_BED_CORRECTION_REAR c=14 r=1 "Rear side [um]"
MSG_BED_CORRECTION_RESET c=0 r=0 "Reset"
MSG_BED_CORRECTION_RIGHT c=14 r=1 "Right side[um]"
MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0 "Heating disabled by safety timer."
MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 "Bed leveling failed. Sensor triggered too high. Waiting for reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration failed. Front calibration points not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration failed. Left front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration failed. Right front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 "XYZ calibration failed. Bed calibration point was not found."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 "XYZ calibration all right. Skew will be corrected automatically."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration compromised. Front calibration points not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration compromised. Left front calibration point not reachable."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration compromised. Right front calibration point not reachable."
MSG_BEGIN_FILE_LIST c=0 r=0 "Begin file list"
MSG_CALIBRATE_BED c=0 r=0 "Calibrate XYZ"
MSG_CALIBRATE_BED_RESET c=0 r=0 "Reset XYZ calibr."
MSG_CALIBRATE_E c=20 r=1 "Calibrate E"
MSG_CALIBRATE_PINDA c=17 r=1 "Calibrate"
MSG_CALIBRATION_PINDA_MENU c=17 r=1 "Temp. calibration"
MSG_CLEAN_NOZZLE_E c=20 r=8 "E calibration finished. Please clean the nozzle. Click when done."
MSG_CNG_SDCARD c=0 r=0 "Change SD card"
MSG_CONFIGURATION_VER c=0 r=0 " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 "Are left and right Z~carriages all up?"
MSG_CORRECTLY c=20 r=0 "Changed correctly?"
MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
MSG_CURRENT c=19 r=1 "Current"
MSG_DATE c=17 r=1 "Date:"
MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 "Old settings found. Default PID, Esteps etc. will be set."
MSG_DISABLE_STEPPERS c=0 r=0 "Disable steppers"
MSG_DWELL c=0 r=0 "Sleep..."
MSG_E_CAL_KNOB c=20 r=8 "Rotate knob until mark reaches extruder body. Click when done."
MSG_END_FILE_LIST c=0 r=0 "End file list"
MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0 " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH c=0 r=0 "checksum mismatch, Last Line: "
MSG_ERR_KILLED c=0 r=0 "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM c=0 r=0 "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS c=0 r=0 "No thermistors - no temperature"
MSG_EXTRUDER_1 c=17 r=1 "Extruder 1"
MSG_EXTRUDER_2 c=17 r=1 "Extruder 2"
MSG_EXTRUDER_3 c=17 r=1 "Extruder 3"
MSG_EXTRUDER_4 c=17 r=1 "Extruder 4"
MSG_EXTRUDER_CORRECTION c=9 r=0 "E-correct"
MSG_EXTRUDER_CORRECTION_OFF c=6 r=0 " [off"
MSG_FACTOR c=0 r=0 " \002 Fact"
MSG_FANS_CHECK_OFF c=17 r=1 "Fans check [off]"
MSG_FANS_CHECK_ON c=17 r=1 "Fans check [on]"
MSG_FILAMENT_SENSOR c=20 r=0 "Filament sensor"
MSG_FILE_CNT c=20 r=4 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
MSG_FILE_INCOMPLETE c=20 r=2 "File incomplete. Continue anyway?"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 "Iteration "
MSG_FLOW c=0 r=0 "Flow"
MSG_FORCE_SELFTEST c=20 r=8 "Selftest will be run to calibrate accurate sensorless rehoming."
MSG_FREE_MEMORY c=0 r=0 " Free Memory: "
MSG_FSENS_AUTOLOAD_OFF c=17 r=1 "F. autoload [off]"
MSG_FSENS_AUTOLOAD_ON c=17 r=1 "F. autoload [on]"
MSG_FSENS_NOT_RESPONDING c=20 r=4 "ERROR: Filament sensor is not responding, please check connection."
MSG_FSENSOR_NA c=0 r=0 "Fil. sensor [N/A]"
MSG_FW_VERSION_ALPHA c=20 r=8 "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
MSG_FW_VERSION_BETA c=20 r=8 "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
MSG_FW_VERSION_UNKNOWN c=20 r=8 "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
MSG_HOMEYZ_DONE c=0 r=0 "Calibration done"
MSG_HOMEYZ_PROGRESS c=0 r=0 "Calibrating Z"
MSG_CHANGE_EXTR c=20 r=1 "Change extruder"
MSG_CHANGE_SUCCESS c=0 r=0 "Change success!"
MSG_CHANGED_BOTH c=20 r=4 "Warning: both printer type and motherboard type changed."
MSG_CHANGED_MOTHERBOARD c=20 r=4 "Warning: motherboard type changed."
MSG_CHANGED_PRINTER c=20 r=4 "Warning: printer type changed."
MSG_CHANGING_FILAMENT c=20 r=0 "Changing filament!"
MSG_CHECK_IDLER c=20 r=4 "Please open idler and remove filament manually."
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Improving bed calibration point"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
MSG_INFO_EXTRUDER c=15 r=1 "Extruder info"
MSG_INFO_NOZZLE_FAN c=11 r=1 "Nozzle FAN:"
MSG_INFO_PRINT_FAN c=11 r=1 "Print FAN: "
MSG_INIT_SDCARD c=0 r=0 "Init. SD card"
MSG_INSERT_FILAMENT c=20 r=0 "Insert filament"
MSG_KILLED c=0 r=0 "KILLED. "
MSG_LANGUAGE_SELECT c=0 r=0 "Select language"
MSG_LEFT c=12 r=1 "Left:"
MSG_LOAD_ALL c=0 r=0 "Load all"
MSG_LOAD_FILAMENT_1 c=17 r=0 "Load filament 1"
MSG_LOAD_FILAMENT_2 c=17 r=0 "Load filament 2"
MSG_LOAD_FILAMENT_3 c=17 r=0 "Load filament 3"
MSG_LOAD_FILAMENT_4 c=17 r=0 "Load filament 4"
MSG_LOADING_COLOR c=0 r=0 "Loading color"
MSG_LOOSE_PULLEY c=20 r=1 "Loose pulley"
MSG_M104_INVALID_EXTRUDER c=0 r=0 "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER c=0 r=0 "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER c=0 r=0 "M109 Invalid extruder "
MSG_M119_REPORT c=0 r=0 "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER c=0 r=0 "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER c=0 r=0 "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER c=0 r=0 "M221 Invalid extruder "
MSG_MARK_FIL c=20 r=8 "Mark filament 100mm from extruder body. Click when done."
MSG_MAX c=0 r=0 " \002 Max"
MSG_MEASURED_OFFSET c=0 r=0 "[0;0] point offset"
MSG_MEASURED_SKEW c=15 r=1 "Measured skew:"
MSG_MENU_BELT_STATUS c=15 r=1 "Belt status"
MSG_MENU_TEMPERATURES c=15 r=1 "Temperatures"
MSG_MENU_VOLTAGES c=15 r=1 "Voltages"
MSG_MESH_BED_LEVELING c=0 r=0 "Mesh Bed Leveling"
MSG_MIN c=0 r=0 " \002 Min"
MSG_MOVE_AXIS c=0 r=0 "Move axis"
MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
MSG_MOVE_E c=0 r=0 "Extruder"
MSG_MOVE_X c=0 r=0 "Move X"
MSG_MOVE_Y c=0 r=0 "Move Y"
MSG_MOVE_Z c=0 r=0 "Move Z"
MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 "New firmware version available:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0 "Please upgrade."
MSG_NO_CARD c=0 r=0 "No SD card"
MSG_NO_MOVE c=0 r=0 "No move."
MSG_NOT_COLOR c=0 r=0 "Color not correct"
MSG_NOT_LOADED c=19 r=0 "Filament not loaded"
MSG_NOZZLE1 c=0 r=0 "Nozzle2"
MSG_NOZZLE2 c=0 r=0 "Nozzle3"
MSG_PAUSE_PRINT c=0 r=0 "Pause print"
MSG_PICK_Z c=0 r=0 "Pick print"
MSG_PID_EXTRUDER c=17 r=1 "PID calibration"
MSG_PID_FINISHED c=20 r=1 "PID cal. finished"
MSG_PID_RUNNING c=20 r=1 "PID cal. "
MSG_PINDA_NOT_CALIBRATED c=20 r=4 "Temperature calibration has not been run yet"
MSG_PINDA_PREHEAT c=20 r=1 "PINDA Heating"
MSG_PLA_FILAMENT_LOADED c=20 r=2 "Is PLA filament loaded?"
MSG_PLANNER_BUFFER_BYTES c=0 r=0 " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA c=20 r=4 "Please load PLA filament first."
MSG_PREHEAT c=0 r=0 "Preheat"
MSG_PREPARE_FILAMENT c=20 r=1 "Prepare new filament"
MSG_PRESS c=20 r=0 "and press the knob"
MSG_PRESS_TO_PREHEAT c=20 r=4 "Press knob to preheat nozzle and continue."
MSG_PRINT_PAUSED c=20 r=1 "Print paused"
MSG_PRINTER_DISCONNECTED c=20 r=1 "Printer disconnected"
MSG_PRUSA3D c=0 r=0 "prusa3d.com"
MSG_PRUSA3D_FORUM c=0 r=0 "forum.prusa3d.com"
MSG_PRUSA3D_HOWTO c=0 r=0 "howto.prusa3d.com"
MSG_RECOVERING_PRINT c=20 r=1 "Recovering print "
MSG_RESEND c=0 r=0 "Resend: "
MSG_RESUME_PRINT c=0 r=0 "Resume print"
MSG_RESUMING c=0 r=0 "Resuming print"
MSG_RESUMING_PRINT c=20 r=1 "Resuming print"
MSG_RIGHT c=12 r=1 "Right:"
MSG_SD_CANT_ENTER_SUBDIR c=0 r=0 "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR c=0 r=0 "Cannot open subdir"
MSG_SD_CARD_OK c=0 r=0 "SD card ok"
MSG_SD_FILE_OPENED c=0 r=0 "File opened: "
MSG_SD_FILE_SELECTED c=0 r=0 "File selected"
MSG_SD_INIT_FAIL c=0 r=0 "SD init fail"
MSG_SD_INSERTED c=0 r=0 "Card inserted"
MSG_SD_OPENROOT_FAIL c=0 r=0 "openRoot failed"
MSG_SD_PRINTING_BYTE c=0 r=0 "SD printing byte "
MSG_SD_REMOVED c=0 r=0 "Card removed"
MSG_SD_VOL_INIT_FAIL c=0 r=0 "volume.init failed"
MSG_SD_WRITE_TO_FILE c=0 r=0 "Writing to file: "
MSG_SECOND_SERIAL_OFF c=17 r=1 "RPi port [off]"
MSG_SECOND_SERIAL_ON c=17 r=1 "RPi port [on]"
MSG_SELFTEST c=0 r=0 "Selftest "
MSG_SELFTEST_AXIS c=0 r=0 "Axis"
MSG_SELFTEST_AXIS_LENGTH c=0 r=0 "Axis length"
MSG_SELFTEST_BEDHEATER c=0 r=0 "Bed / Heater"
MSG_SELFTEST_ENDSTOP c=0 r=0 "Endstop"
MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 "Endstop not hit"
MSG_SELFTEST_ENDSTOPS c=0 r=0 "Endstops"
MSG_SELFTEST_ERROR c=0 r=0 "Selftest error !"
MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0 "Extruder fan:"
MSG_SELFTEST_FANS c=0 r=0 "Front/left fans"
MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0 "Filament sensor:"
MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0 "Heater/Thermistor"
MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0 "All correct "
MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0 "Checking endstops"
MSG_SELFTEST_CHECK_HOTEND c=20 r=0 "Checking hotend "
MSG_SELFTEST_CHECK_X c=20 r=0 "Checking X axis "
MSG_SELFTEST_CHECK_Y c=20 r=0 "Checking Y axis "
MSG_SELFTEST_CHECK_Z c=20 r=0 "Checking Z axis "
MSG_SELFTEST_NOTCONNECTED c=0 r=0 "Not connected"
MSG_SELFTEST_OK c=0 r=0 "Self test OK"
MSG_SELFTEST_PLEASECHECK c=0 r=0 "Please check :"
MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 "Print fan:"
MSG_SELFTEST_START c=20 r=0 "Self test start "
MSG_SELFTEST_SWAPPED c=0 r=0 "Swapped"
MSG_SET_TEMPERATURE c=19 r=1 "Set temperature:"
MSG_SEVERE_SKEW c=15 r=1 "Severe skew:"
MSG_SHOW_END_STOPS c=17 r=1 "Show end stops"
MSG_SLIGHT_SKEW c=15 r=1 "Slight skew:"
MSG_SORT_ALPHA c=17 r=1 "Sort: [Alphabet]"
MSG_SORT_NONE c=17 r=1 "Sort: [None]"
MSG_SORT_TIME c=17 r=1 "Sort: [Time]"
MSG_SORTING c=20 r=1 "Sorting files"
MSG_SPEED c=0 r=0 "Speed"
MSG_STACK_ERROR c=20 r=4 "Error - static memory has been overwritten"
MSG_STATISTICS c=0 r=0 "Statistics "
MSG_STATS_FILAMENTUSED c=20 r=0 "Filament used: "
MSG_STATS_PRINTTIME c=20 r=0 "Print time: "
MSG_STATS_TOTALFILAMENT c=20 r=0 "Total filament :"
MSG_STATS_TOTALPRINTTIME c=20 r=0 "Total print time :"
MSG_STEPPER_TOO_HIGH c=0 r=0 "Steprate too high: "
MSG_SUPPORT c=0 r=0 "Support"
MSG_TEMP_CAL_FAILED c=20 r=8 "Temperature calibration failed"
MSG_TEMP_CAL_WARNING c=20 r=4 "Stable ambient temperature 21-26C is needed a rigid stand is required."
MSG_TEMP_CALIBRATION_OFF c=20 r=1 "Temp. cal. [off]"
MSG_TEMP_CALIBRATION_ON c=20 r=1 "Temp. cal. [on]"
MSG_TEMPERATURE c=0 r=0 "Temperature"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 "SD card [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 "SD card [FlshAir]"
MSG_TUNE c=0 r=0 "Tune"
MSG_UNLOAD_ALL c=0 r=0 "Unload all"
MSG_UNLOAD_FILAMENT_1 c=17 r=0 "Unload filament 1"
MSG_UNLOAD_FILAMENT_2 c=17 r=0 "Unload filament 2"
MSG_UNLOAD_FILAMENT_3 c=17 r=0 "Unload filament 3"
MSG_UNLOAD_FILAMENT_4 c=17 r=0 "Unload filament 4"
MSG_UNLOAD_SUCCESSFUL c=20 r=2 "Was filament unload successful?"
MSG_USED c=19 r=1 "Used during print"
MSG_USERWAIT c=0 r=0 "Wait for user..."
MSG_V2_CALIBRATION c=17 r=1 "First layer cal."
MSG_WAITING_TEMP c=20 r=3 "Waiting for nozzle and bed cooling"
MSG_WAITING_TEMP_PINDA c=20 r=3 "Waiting for PINDA probe cooling"
MSG_WIZARD c=17 r=1 "Wizard"
MSG_WIZARD_CLEAN_HEATBED c=20 r=8 "Please clean heatbed and then press the knob."
MSG_WIZARD_FILAMENT_LOADED c=20 r=2 "Is filament loaded?"
MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 "Please load PLA filament and then resume Wizard by rebooting the printer."
MSG_WIZARD_LOAD_FILAMENT c=20 r=8 "Please insert PLA filament to the extruder, then press knob to load it."
MSG_WIZARD_PLA_FILAMENT c=20 r=2 "Is it PLA filament?"
MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
MSG_WIZARD_RERUN c=20 r=7 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
MSG_WIZARD_SELFTEST c=20 r=8 "First, I will run the selftest to check most common assembly problems."
MSG_WIZARD_V2_CAL c=20 r=8 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
MSG_WIZARD_V2_CAL_2 c=20 r=12 "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
MSG_WIZARD_WELCOME c=20 r=7 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
MSG_WIZARD_WILL_PREHEAT c=20 r=4 "Now I will preheat nozzle for PLA."
MSG_WIZARD_XYZ_CAL c=20 r=8 "I will run xyz calibration now. It will take approx. 12 mins."
MSG_WIZARD_Z_CAL c=20 r=8 "I will run z calibration now."
MSG_XYZ_DETAILS c=19 r=1 "XYZ cal. details"
MSG_Y_DISTANCE_FROM_MIN c=20 r=1 "Y distance from min:"

289
lang_upgrade/msgs_es.txt Normal file
View file

@ -0,0 +1,289 @@
MSG_ADJUSTZ "Ajustar Eje Z"
MSG_ALL "Todos"
MSG_AUTO_HOME "Llevar al origen"
MSG_BABYSTEP_X "Babystep X"
MSG_BABYSTEP_Y "Babystep Y"
MSG_BABYSTEP_Z "Micropaso Eje Z"
MSG_BABYSTEP_Z_NOT_SET "Distancia entre la punta del nozzle y la superficie de la heatbed aun no fijada. Por favor siga el manual, capitulo First steps, First layer calibration."
MSG_BABYSTEPPING_X "Babystepping X"
MSG_BABYSTEPPING_Y "Babystepping Y"
MSG_BABYSTEPPING_Z "Ajustar Z"
MSG_BED "Heatbed"
MSG_BED_CORRECTION_FRONT "Frontal [um]"
MSG_BED_CORRECTION_LEFT "Izquierda [um]"
MSG_BED_CORRECTION_MENU "Corr. de la cama"
MSG_BED_CORRECTION_REAR "Trasera [um]"
MSG_BED_CORRECTION_RESET "Reset"
MSG_BED_CORRECTION_RIGHT "Derecha [um]"
MSG_BED_DONE "Base preparada"
MSG_BED_HEATING "Calentando Base"
MSG_BED_LEVELING_FAILED_POINT_HIGH "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset."
MSG_BED_LEVELING_FAILED_POINT_LOW "Nivelacion fallada. Sensor no funciona. Escombros en nozzle? Esperando reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibracion XYZ fallada. Puntos frontales no alcanzables."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consulta el manual por favor."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en heatbed no encontrados."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
MSG_BEGIN_FILE_LIST "Begin file list"
MSG_CALIBRATE_BED "Calibra XYZ"
MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
MSG_CALIBRATE_E "Calibrar E"
MSG_CALIBRATE_PINDA "Calibrar"
MSG_CALIBRATION_PINDA_MENU "Calibracion temp."
MSG_CARD_MENU "Menu tarjeta SD"
MSG_CLEAN_NOZZLE_E "E calibrado. Limpia nozzle. Haz clic una vez terminado."
MSG_CNG_SDCARD "Change SD card"
MSG_CONFIGURATION_VER " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Carros Z izq./der. estan arriba maximo?"
MSG_CONFIRM_NOZZLE_CLEAN "Limpia nozzle para calibracion. Click cuando acabes."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpia nozzle para calibracion. Haz clic una vez terminado."
MSG_CONTROL "Control"
MSG_COOLDOWN "Enfriar"
MSG_CORRECTLY "Cambiado correct.?"
MSG_CURRENT "Actual"
MSG_DISABLE_STEPPERS "Apagar motores"
MSG_DWELL "En espera"
MSG_E_CAL_KNOB "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haz clic una vez terminado."
MSG_END_FILE_LIST "End file list"
MSG_ENDSTOP_HIT "TRIGGERED"
MSG_ENDSTOP_OPEN "open"
MSG_ENDSTOPS_HIT "endstops hit: "
MSG_Enqueing "enqueing \""
MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
MSG_ERR_KILLED "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR "ERROR:"
MSG_EXTRUDER "Extrusor"
MSG_EXTRUDER_1 "Extrusor 1"
MSG_EXTRUDER_2 "Extrusor 2"
MSG_EXTRUDER_3 "Extrusor 3"
MSG_EXTRUDER_4 "Extrusor 4"
MSG_FACTOR " \002 Fact"
MSG_FAN_SPEED "Velocidad Vent."
MSG_FIL_ADJUSTING "Ajustando filamentos. Espera por favor."
MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
MSG_FILAMENT_LOADING_T0 "Insertar filamento en el extrusor 1. Haz clic una vez terminado."
MSG_FILAMENT_LOADING_T1 "Insertar filamento en el extrusor 2. Haz clic una vez terminado."
MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haz clic una vez terminado."
MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haz clic una vez terminado."
MSG_FILAMENTCHANGE "Cambiar filamento"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiteracion "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Buscando punto de calibracion heatbed"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " de 4"
MSG_FINISHING_MOVEMENTS "Term. movimientos"
MSG_FLOW "Flujo"
MSG_FLOW0 "Flow 0"
MSG_FLOW1 "Flow 1"
MSG_FLOW2 "Flow 2"
MSG_FOLLOW_CALIBRATION_FLOW "Impresora no esta calibrada todavia. Por favor usa el manual, capitulo First steps, Calibration flow."
MSG_FREE_MEMORY " Free Memory: "
MSG_HEATING "Calentando..."
MSG_HEATING_COMPLETE "Calentamiento final."
MSG_HOMEYZ "Calibrar Z"
MSG_HOMEYZ_DONE "Calibracion OK"
MSG_HOMEYZ_PROGRESS "Calibrando Z"
MSG_CHANGE_EXTR "Cambiar extrusor."
MSG_CHANGE_SUCCESS "Cambio correcto"
MSG_CHANGING_FILAMENT "Cambiando filamento"
MSG_CHOOSE_EXTRUDER "Elegir extrusor:"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Mejorando punto de calibracion heatbed"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " de 4"
MSG_INIT_SDCARD "Init. SD card"
MSG_INSERT_FILAMENT "Introducir filamento"
MSG_KILLED "PARADA DE EMERGENCIA"
MSG_LANGUAGE_NAME "Espanol"
MSG_LANGUAGE_SELECT "Cambiae el idioma"
MSG_LOAD_ALL "Intr. todos fil."
MSG_LOAD_EPROM "Load memory"
MSG_LOAD_FILAMENT "Introducir filam."
MSG_LOAD_FILAMENT_1 "Introducir fil. 1"
MSG_LOAD_FILAMENT_2 "Introducir fil. 2"
MSG_LOAD_FILAMENT_3 "Introducir fil. 3"
MSG_LOAD_FILAMENT_4 "Introducir fil. 4"
MSG_LOADING_COLOR "Cambiando color"
MSG_LOADING_FILAMENT "Introduciendo filam."
MSG_LOOSE_PULLEY "Polea suelta"
MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
MSG_M117_V2_CALIBRATION "M117 Cal. primera cap."
MSG_M119_REPORT "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
MSG_MAIN "Menu principal"
MSG_MARK_FIL "Marque el filamento 100 mm por encima del final del extrusor. Haz clic una vez terminado."
MSG_MAX " \002 Max"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Midiendo altura del punto de calibracion"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " de 9"
MSG_MENU_CALIBRATION "Calibracion"
MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
MSG_MIN " \002 Min"
MSG_MOTION "Motion"
MSG_MOVE_AXIS "Mover ejes"
MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrando XYZ. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrando Z. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
MSG_MOVE_E "Extruir"
MSG_MOVE_X "Mover X"
MSG_MOVE_Y "Mover Y"
MSG_MOVE_Z "Mover Z"
MSG_NEW_FIRMWARE_AVAILABLE "Nuevo firmware disponible:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Actualizar por favor"
MSG_NO "No"
MSG_NO_CARD "No hay tarjeta SD"
MSG_NO_MOVE "Sin movimiento"
MSG_NOT_COLOR "Color no homogeneo"
MSG_NOT_LOADED "Fil. no introducido"
MSG_NOZZLE "Nozzle"
MSG_NOZZLE1 "Nozzle2"
MSG_NOZZLE2 "Nozzle3"
MSG_OK "ok"
MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
MSG_PAUSE_PRINT "Pausar impresion"
MSG_PICK_Z "Esc. Modelo Adecuado"
MSG_PID_EXTRUDER "Calibracion PID"
MSG_PID_FINISHED "Cal. PID terminada"
MSG_PID_RUNNING "Cal. PID "
MSG_PINDA_NOT_CALIBRATED "La temperatura de calibracion no ha sido ajustada"
MSG_PINDA_PREHEAT "Calentando PINDA"
MSG_PLA_FILAMENT_LOADED "Esta el filamento PLA cargado?"
MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA "Carga el filamento PLA primero por favor."
MSG_PLEASE_WAIT "Por Favor Esperar"
MSG_POWERUP "PowerUp"
MSG_PREHEAT "Precalentar"
MSG_PREHEAT_NOZZLE "Precalentar extrusor"
MSG_PREPARE_FILAMENT "Preparar filamento"
MSG_PREPARE_FILAMENT "Preparar filamento"
MSG_PRESS "Haz clic"
MSG_PRINT_ABORTED "Impresion cancelada"
MSG_PRINT_PAUSED "Impresion en pausa"
MSG_PRUSA3D "prusa3d.com"
MSG_PRUSA3D_FORUM "forum.prusa3d.com"
MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
MSG_REBOOT "Reiniciar impresora"
MSG_RECTRACT "Rectract"
MSG_REFRESH "\xF8" "Refresh"
MSG_RESEND "Resend: "
MSG_RESTORE_FAILSAFE "Restore failsafe"
MSG_RESUME_PRINT "Reanudar impres."
MSG_RESUMING "Resumiendo impresion"
MSG_RESUMING_PRINT "Reanudar impresion"
MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
MSG_SD_CARD_OK "SD card ok"
MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
MSG_SD_FILE_OPENED "File opened: "
MSG_SD_FILE_SELECTED "File selected"
MSG_SD_INIT_FAIL "SD init fail"
MSG_SD_INSERTED "Tarjeta insertada"
MSG_SD_NOT_PRINTING "Not SD printing"
MSG_SD_OPEN_FILE_FAIL "open failed, File: "
MSG_SD_OPENROOT_FAIL "openRoot failed"
MSG_SD_PRINTING_BYTE "SD printing byte "
MSG_SD_REMOVED "Tarjeta retirada"
MSG_SD_VOL_INIT_FAIL "volume.init failed"
MSG_SD_WORKDIR_FAIL "workDir open failed"
MSG_SD_WRITE_TO_FILE "Writing to file: "
MSG_SELFTEST "Selftest"
MSG_SELFTEST_BEDHEATER "Heatbed"
MSG_SELFTEST_COOLING_FAN "Vent. frontal?"
MSG_SELFTEST_ENDSTOP "Tope final"
MSG_SELFTEST_ENDSTOP_NOTHIT "Tope no alcanzado"
MSG_SELFTEST_ENDSTOPS "Topes finales"
MSG_SELFTEST_ERROR "Autotest error!"
MSG_SELFTEST_EXTRUDER_FAN "Vent. izquierdo?"
MSG_SELFTEST_FAILED "Fallo Selftest"
MSG_SELFTEST_FAN "Test ventiladores"
MSG_SELFTEST_FAN_NO "Ventilador no gira"
MSG_SELFTEST_FAN_YES "Ventilador gira"
MSG_SELFTEST_HEATERTHERMISTOR "Hotend"
MSG_SELFTEST_CHECK_ALLCORRECT "Todo bien"
MSG_SELFTEST_CHECK_BED "Control heatbed"
MSG_SELFTEST_CHECK_ENDSTOPS "Control topes"
MSG_SELFTEST_CHECK_HOTEND "Control hotend "
MSG_SELFTEST_CHECK_X "Control tope X"
MSG_SELFTEST_CHECK_Y "Control tope Y"
MSG_SELFTEST_CHECK_Z "Control tope Z"
MSG_SELFTEST_MOTOR "Motor"
MSG_SELFTEST_NOTCONNECTED "No hay conexion "
MSG_SELFTEST_OK "Self test OK"
MSG_SELFTEST_PLEASECHECK "Controla :"
MSG_SELFTEST_START "Inicio Selftest"
MSG_SELFTEST_WIRINGERROR "Error de conexion"
MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
MSG_SET_HOME_OFFSETS "Set home offsets"
MSG_SET_ORIGIN "Set origin"
MSG_SET_TEMPERATURE "Establecer temp.:"
MSG_SETTINGS "Configuracion"
MSG_SHOW_END_STOPS "Ensena tope final"
MSG_SILENT_MODE_OFF "Modo [rend.pleno]"
MSG_SILENT_MODE_ON "Modo [silencio]"
MSG_SPEED "Velocidad"
MSG_STATISTICS "Estadisticas "
MSG_STATS_FILAMENTUSED "Filamento usado: "
MSG_STATS_PRINTTIME "Tiempo de imp.:"
MSG_STATS_TOTALFILAMENT "Filamento total:"
MSG_STATS_TOTALPRINTTIME "Tiempo total :"
MSG_STEPPER_TOO_HIGH "Steprate too high: "
MSG_STOP_PRINT "Detener impresion"
MSG_STOPPED "PARADA"
MSG_STORE_EPROM "Store memory"
MSG_SUPPORT "Soporte"
MSG_SWITCH_PS_OFF "Switch power off"
MSG_SWITCH_PS_ON "Switch power on"
MSG_TAKE_EFFECT " para aplicar cambios"
MSG_TEMP_CALIBRATION "Cal. temp. "
MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Haz clic para continuar."
MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
MSG_TEMPERATURE "Temperatura"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
MSG_TUNE "Ajustar"
MSG_UNLOAD_ALL "Soltar todos fil."
MSG_UNLOAD_FILAMENT "Soltar filamento"
MSG_UNLOAD_FILAMENT_1 "Soltar fil. 1"
MSG_UNLOAD_FILAMENT_2 "Soltar fil. 2"
MSG_UNLOAD_FILAMENT_3 "Soltar fil. 3"
MSG_UNLOAD_FILAMENT_4 "Soltar fil. 4"
MSG_UNLOADING_FILAMENT "Soltando filamento"
MSG_USB_PRINTING "Impresion con USB "
MSG_USED "Usado en impresion"
MSG_USERWAIT "Esperando ordenes"
MSG_V2_CALIBRATION "Cal. primera cap."
MSG_VOLUMETRIC "Filament"
MSG_VOLUMETRIC_ENABLED "E in mm3"
MSG_WAITING_TEMP "Esperando enfriamiento de heatbed y extrusor."
MSG_WATCH "Monitorizar"
MSG_WIZARD "Wizard"
MSG_WIZARD_CALIBRATION_FAILED "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard"
MSG_WIZARD_CLEAN_HEATBED "Limpia la superficie de la heatbed, por favor, y haz clic"
MSG_WIZARD_DONE "Terminado! Feliz impresion!"
MSG_WIZARD_FILAMENT_LOADED "Esta el filamento cargado?"
MSG_WIZARD_HEATING "Precalentando nozzle. Espera por favor."
MSG_WIZARD_INSERT_CORRECT_FILAMENT "Carga filamento PLA, por favor, y reinicia la impresora para continuar con el Wizard"
MSG_WIZARD_LOAD_FILAMENT "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo."
MSG_WIZARD_PLA_FILAMENT "Es el filamento PLA?"
MSG_WIZARD_QUIT "Siempre puedes acceder al asistente desde Calibracion -> Wizard"
MSG_WIZARD_REPEAT_V2_CAL "Quieres repetir el ultimo paso para reajustar la distancia nozzle-heatbed?"
MSG_WIZARD_RERUN "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
MSG_WIZARD_SELFTEST "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."
MSG_WIZARD_V2_CAL "Voy a calibrar la distancia entre la punta del nozzle y la superficie de la heatbed."
MSG_WIZARD_V2_CAL_2 "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el mando, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."
MSG_WIZARD_WELCOME "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"
MSG_WIZARD_WILL_PREHEAT "Voy a precalentar el nozzle para PLA ahora."
MSG_WIZARD_XYZ_CAL "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."
MSG_WIZARD_Z_CAL "Voy a hacer Calibracion Z ahora."
MSG_YES "Si"
WELCOME_MSG CUSTOM_MENDEL_NAME " prep."

294
lang_upgrade/msgs_it.txt Normal file
View file

@ -0,0 +1,294 @@
MSG_ADJUSTZ "Autoregolare Z?"
MSG_ALL "Tutti"
MSG_AUTO_HOME "Trova origine"
MSG_BABYSTEP_X "Babystep X"
MSG_BABYSTEP_Y "Babystep Y"
MSG_BABYSTEP_Z "Compensazione Z"
MSG_BABYSTEP_Z_NOT_SET "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."
MSG_BABYSTEPPING_X "Babystepping X"
MSG_BABYSTEPPING_Y "Babystepping Y"
MSG_BABYSTEPPING_Z "Compensazione Z"
MSG_BED "Letto"
MSG_BED_CORRECTION_FRONT "Fronte [um]"
MSG_BED_CORRECTION_LEFT "Sinistra [um]"
MSG_BED_CORRECTION_MENU "Correz. liv.letto"
MSG_BED_CORRECTION_REAR "Retro [um]"
MSG_BED_CORRECTION_RESET "Reset"
MSG_BED_CORRECTION_RIGHT "Destra [um]"
MSG_BED_DONE "Piatto fatto."
MSG_BED_HEATING "Riscald. letto"
MSG_BED_LEVELING_FAILED_POINT_HIGH "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset."
MSG_BED_LEVELING_FAILED_POINT_LOW "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibrazione XYZ fallita. Si prega di consultare il manuale."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
MSG_BEGIN_FILE_LIST "Begin file list"
MSG_CALIBRATE_BED "Calibra XYZ"
MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
MSG_CALIBRATE_E "Calibra E"
MSG_CALIBRATE_PINDA "Calibrare"
MSG_CALIBRATION_PINDA_MENU "Taratura temp."
MSG_CARD_MENU "Stampa da SD"
MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."
MSG_CNG_SDCARD "Change SD card"
MSG_CONFIGURATION_VER " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP "I carrelli Z sin/des sono altezza max?"
MSG_CONFIRM_NOZZLE_CLEAN "Pulire l'ugello per la calibrazione, poi fare click."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
MSG_COOLDOWN "Raffredda"
MSG_CORRECTLY "Cambiato corr.?"
MSG_CURRENT "Attuale"
MSG_DATE "Data"
MSG_DISABLE_STEPPERS "Disabilit motori"
MSG_DWELL "Sospensione..."
MSG_E_CAL_KNOB "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare."
MSG_END_FILE_LIST "End file list"
MSG_ENDSTOP_HIT "TRIGGERED"
MSG_ENDSTOP_OPEN "open"
MSG_ENDSTOPS_HIT "endstops hit: "
MSG_Enqueing "enqueing \""
MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
MSG_ERR_KILLED "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR "ERRORE:"
MSG_EXTRUDER "Estrusore"
MSG_EXTRUDER_1 "Estrusore 1"
MSG_EXTRUDER_2 "Estrusore 2"
MSG_EXTRUDER_3 "Estrusore 3"
MSG_EXTRUDER_4 "Estrusore 4"
MSG_FAN_SPEED "Velocita vent."
MSG_FIL_ADJUSTING "Filamento in fase di regolazione. Attendere prego."
MSG_FILAMENT_CLEAN "Il colore e' nitido?"
MSG_FILAMENT_LOADING_T0 "Inserire filamento nell'estrusore 1. Click per continuare."
MSG_FILAMENT_LOADING_T1 "Inserire filamento nell'estrusore 2. Click per continuare."
MSG_FILAMENT_LOADING_T2 "Inserire filamento nell'estrusore 3. Click per continuare."
MSG_FILAMENT_LOADING_T3 "Inserire filamento nell'estrusore 4. Click per continuare."
MSG_FILAMENTCHANGE "Camb. filamento"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiterazione "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Ricerca del letto punto di calibraz."
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " su 4"
MSG_FINISHING_MOVEMENTS "Arresto in corso"
MSG_FLOW "Flusso"
MSG_FOLLOW_CALIBRATION_FLOW "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione."
MSG_FREE_MEMORY " Free Memory: "
MSG_HEATING "Riscaldamento..."
MSG_HEATING_COMPLETE "Riscald. completo"
MSG_HOMEYZ "Calibra Z"
MSG_HOMEYZ_DONE "Calibrazione OK"
MSG_HOMEYZ_PROGRESS "Calibrando Z"
MSG_CHANGE_EXTR "Cambio estrusore."
MSG_CHANGE_SUCCESS "Cambio riuscito!"
MSG_CHANGING_FILAMENT "Cambiando filam."
MSG_CHOOSE_EXTRUDER "Seleziona estrusore:"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Perfezion. il letto punto di calibraz."
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " su 4"
MSG_INIT_SDCARD "Init. SD card"
MSG_INSERT_FILAMENT "Inserire filamento"
MSG_KILLED "IN TILT."
MSG_LANGUAGE_NAME "Italiano"
MSG_LANGUAGE_SELECT "Seleziona lingua"
MSG_LEFT "Sinistra:"
MSG_LOAD_ALL "Caricare tutti"
MSG_LOAD_EPROM "Load memory"
MSG_LOAD_FILAMENT "Carica filamento"
MSG_LOAD_FILAMENT_1 "Caricare fil. 1"
MSG_LOAD_FILAMENT_2 "Caricare fil. 2"
MSG_LOAD_FILAMENT_3 "Caricare fil. 3"
MSG_LOAD_FILAMENT_4 "Caricare fil. 4"
MSG_LOADING_COLOR "Caricando colore"
MSG_LOADING_FILAMENT "Caricando filam."
MSG_LOOSE_PULLEY "Puleggia lenta"
MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
MSG_M117_V2_CALIBRATION "M117 Cal. primo layer."
MSG_M119_REPORT "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
MSG_MAIN "Menu principale"
MSG_MARK_FIL "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Misurare l'altezza di riferimento del punto di calibrazione"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " su 9"
MSG_MEASURED_SKEW "Incl. misurata:"
MSG_MENU_CALIBRATION "Calibrazione"
MSG_MESH_BED_LEVELING "Mesh livel. letto"
MSG_MOTION "Motion"
MSG_MOVE_01MM "Move 0.1mm"
MSG_MOVE_10MM "Move 10mm"
MSG_MOVE_1MM "Move 1mm"
MSG_MOVE_AXIS "Muovi asse"
MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
MSG_MOVE_E "Muovi Estrusore"
MSG_MOVE_X "Muovi X"
MSG_MOVE_Y "Muovi Y"
MSG_MOVE_Z "Muovi Z"
MSG_NEW_FIRMWARE_AVAILABLE "Nuova versione del firmware disponibile"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prega aggiorna."
MSG_NO "No"
MSG_NO_CARD "Nessuna SD"
MSG_NO_MOVE "Nessun movimento."
MSG_NOT_COLOR "Colore non puro"
MSG_NOT_LOADED "Fil. non caricato"
MSG_NOZZLE "Ugello"
MSG_NOZZLE1 "Nozzle2"
MSG_NOZZLE2 "Nozzle3"
MSG_OK "ok"
MSG_PAPER "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
MSG_PAUSE_PRINT "Metti in pausa"
MSG_PICK_Z "Pick print"
MSG_PID_EXTRUDER "Calibrazione PID"
MSG_PID_FINISHED "Cal. PID completa"
MSG_PID_RUNNING "Cal. PID"
MSG_PINDA_NOT_CALIBRATED "Taratura della temperatura non ancora eseguita"
MSG_PINDA_PREHEAT "Riscald. PINDA"
MSG_PLA_FILAMENT_LOADED "Il PLA e stato caricato?"
MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA "Per favore prima caricare filamento di PLA."
MSG_PLEASE_WAIT "Aspetta"
MSG_POSITION_UNKNOWN "Home X/Y before Z"
MSG_POWERUP "PowerUp"
MSG_PREHEAT "Preriscalda"
MSG_PREHEAT_NOZZLE "Preris. ugello!"
MSG_PREPARE_FILAMENT "Preparare filamento"
MSG_PRESS "e cliccare manopola"
MSG_PRINT_ABORTED "Stampa abortita"
MSG_PRINT_PAUSED "Stampa in pausa"
MSG_PRUSA3D "prusa3d.com"
MSG_PRUSA3D_FORUM "forum.prusa3d.com"
MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
MSG_REBOOT "Riavvia stampante"
MSG_REFRESH "\xF8" "Refresh"
MSG_RESEND "Resend: "
MSG_RESTORE_FAILSAFE "Restore failsafe"
MSG_RESUME_PRINT "Riprendi stampa"
MSG_RESUMING "Riprendi stampa"
MSG_RESUMING_PRINT "Stampa in ripresa"
MSG_RIGHT "Destra:"
MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
MSG_SD_CARD_OK "SD card ok"
MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
MSG_SD_FILE_OPENED "File opened: "
MSG_SD_FILE_SELECTED "File selected"
MSG_SD_INIT_FAIL "SD init fail"
MSG_SD_INSERTED "SD inserita"
MSG_SD_NOT_PRINTING "Not SD printing"
MSG_SD_OPEN_FILE_FAIL "open failed, File: "
MSG_SD_OPENROOT_FAIL "openRoot failed"
MSG_SD_PRINTING_BYTE "SD printing byte "
MSG_SD_REMOVED "SD rimossa"
MSG_SD_VOL_INIT_FAIL "volume.init failed"
MSG_SD_WORKDIR_FAIL "workDir open failed"
MSG_SD_WRITE_TO_FILE "Writing to file: "
MSG_SELFTEST "Autotest"
MSG_SELFTEST_BEDHEATER "Letto/Riscald."
MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?"
MSG_SELFTEST_ENDSTOP "Finecorsa"
MSG_SELFTEST_ENDSTOP_NOTHIT "Finec. fuori por."
MSG_SELFTEST_ENDSTOPS "Finecorsa (2)"
MSG_SELFTEST_ERROR "Autotest negativo"
MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?"
MSG_SELFTEST_FAILED "Autotest fallito"
MSG_SELFTEST_FAN "Prova del ventilator"
MSG_SELFTEST_FAN_NO "Non si gira"
MSG_SELFTEST_FAN_YES "Gira"
MSG_SELFTEST_HEATERTHERMISTOR "Riscald./Termist."
MSG_SELFTEST_CHECK_ALLCORRECT "Nessun errore"
MSG_SELFTEST_CHECK_BED "Verifica letto"
MSG_SELFTEST_CHECK_ENDSTOPS "Verifica finecorsa"
MSG_SELFTEST_CHECK_HOTEND "Verifica ugello"
MSG_SELFTEST_CHECK_X "Verifica asse X"
MSG_SELFTEST_CHECK_Y "Verifica asse Y"
MSG_SELFTEST_CHECK_Z "Verifica asse Z"
MSG_SELFTEST_MOTOR "Motore"
MSG_SELFTEST_NOTCONNECTED "Non connesso"
MSG_SELFTEST_OK "Autotest OK"
MSG_SELFTEST_PLEASECHECK "Verificare:"
MSG_SELFTEST_START "Avvia autotest"
MSG_SELFTEST_WIRINGERROR "Errore cablaggio"
MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
MSG_SET_HOME_OFFSETS "Set home offsets"
MSG_SET_ORIGIN "Set origin"
MSG_SET_TEMPERATURE "Imposta temperatura"
MSG_SETTINGS "Impostazioni"
MSG_SEVERE_SKEW "Inc. rilevante:"
MSG_SHOW_END_STOPS "Stato finecorsa"
MSG_SILENT_MODE_OFF "Mode [forte]"
MSG_SILENT_MODE_ON "Modo [silenzioso]"
MSG_SLIGHT_SKEW "Incl. leggera:"
MSG_SPEED "Velocita"
MSG_STATISTICS "Statistiche"
MSG_STATS_FILAMENTUSED "Filamento usato:"
MSG_STATS_PRINTTIME "Tempo di stampa:"
MSG_STATS_TOTALFILAMENT "Filamento tot:"
MSG_STATS_TOTALPRINTTIME "Tempo stampa tot:"
MSG_STEPPER_TOO_HIGH "Steprate too high: "
MSG_STOP_PRINT "Arresta stampa"
MSG_STOPPED "ARRESTATO."
MSG_STORE_EPROM "Store memory"
MSG_SUPPORT "Support"
MSG_SWITCH_PS_OFF "Switch power off"
MSG_SWITCH_PS_ON "Switch power on"
MSG_TAKE_EFFECT " per attualizzare"
MSG_TEMP_CALIBRATION "Cal. temp. "
MSG_TEMP_CALIBRATION_DONE "Taratura temperatura terminata. Fare click per continuare."
MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
MSG_TEMPERATURE "Temperatura"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
MSG_TUNE "Regola"
MSG_UNLOAD_ALL "Rilasciare tutti"
MSG_UNLOAD_FILAMENT "Scarica filamento"
MSG_UNLOAD_FILAMENT_1 "Rilasciare fil. 1"
MSG_UNLOAD_FILAMENT_2 "Rilasciare fil. 1"
MSG_UNLOAD_FILAMENT_3 "Rilasciare fil. 1"
MSG_UNLOAD_FILAMENT_4 "Rilasciare fil. 1"
MSG_UNLOADING_FILAMENT "Rilasc. filamento"
MSG_USB_PRINTING "Stampa da USB"
MSG_USED "Usati nella stampa"
MSG_USERWAIT "Attendendo utente"
MSG_V2_CALIBRATION "Cal. primo layer."
MSG_VOLUMETRIC "Filament"
MSG_VOLUMETRIC_ENABLED "E in mm3"
MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto"
MSG_WATCH "Schermata info"
MSG_WIZARD "Wizard"
MSG_WIZARD_CALIBRATION_FAILED "Per favore consulta il nostro manuale per risolvere il problema. Poi riprendi il Wizard dopo aver riavviato la stampante."
MSG_WIZARD_CLEAN_HEATBED "Per favore pulisci il piatto, poi premi la manopola."
MSG_WIZARD_DONE "Ben fatto. Buona stampa!"
MSG_WIZARD_FILAMENT_LOADED "Il filamento e stato caricato?"
MSG_WIZARD_HEATING "Sto preriscaldando l'ugello. Per favore attendi."
MSG_WIZARD_INSERT_CORRECT_FILAMENT "Per favore carica filamento di PLA e riprendi il Wizard dopo aver riavviato la stampante."
MSG_WIZARD_LOAD_FILAMENT "Per favore inserisci il filamento di PLA nell'estrusore, poi premi la manopola per caricare."
MSG_WIZARD_PLA_FILAMENT "E questo un filamento di PLA?"
MSG_WIZARD_QUIT "E possibile proseguire la guide Wizard in qualsiasi momento attraverso Calibrazione -> Wizard."
MSG_WIZARD_REPEAT_V2_CAL "Desideri ripetere l'ultimo passaggio per migliorare la distanza fra ugello e piatto?"
MSG_WIZARD_RERUN "Se avvi il Wizard perderai la calibrazione preesistente e dovrai ricominciare dall'inizio. Continuare?"
MSG_WIZARD_SELFTEST "Anzitutto avviero il Self Test per controllare gli errori di assemblaggio piu comuni."
MSG_WIZARD_V2_CAL "Adesso tarero lo stacco fra ugello e superfice del piatto."
MSG_WIZARD_V2_CAL_2 "Adesso iniziero a stampare una linea e tu dovrai abbassare l'ugello poco per volta ruotando la manopola sino a raggiungere una altezza ottimale. Per favore dai uno sguardo all'immagine del nostro manuale, cap.Calibrazione."
MSG_WIZARD_WELCOME "Ciao, sono la tua stampante Original Prusa i3. Gradiresti aiuto attraverso il processo di configurazione?"
MSG_WIZARD_WILL_PREHEAT "Adesso preriscaldero l'ugello per PLA."
MSG_WIZARD_XYZ_CAL "Adesso avviero una Calibrazione XYZ. Puo durare circa 12 min."
MSG_WIZARD_Z_CAL "Adesso avviero una Calibrazione Z."
MSG_XYZ_DETAILS "XYZ Cal. dettagli"
MSG_Y_DISTANCE_FROM_MIN "Distanza Y da min:"
MSG_YES "Si"
MSG_ZPROBE_OUT "Z probe out. bed"
MSG_ZPROBE_ZOFFSET "Z Offset"
WELCOME_MSG CUSTOM_MENDEL_NAME " pronta."

295
lang_upgrade/msgs_pl.txt Normal file
View file

@ -0,0 +1,295 @@
MSG_ADJUSTZ "Autodostroic Z?"
MSG_ALL "Wszystko"
MSG_AUTO_HOME "Auto home"
MSG_BABYSTEP_X "Babystep X"
MSG_BABYSTEP_Y "Babystep Y"
MSG_BABYSTEP_Z "Dostrojenie osy Z"
MSG_BABYSTEP_Z_NOT_SET "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy."
MSG_BABYSTEPPING_X "Babystepping X"
MSG_BABYSTEPPING_Y "Babystepping Y"
MSG_BABYSTEPPING_Z "Dostrojenie Z"
MSG_BED "Stolik"
MSG_BED_CORRECTION_FRONT "Do przodu [um]"
MSG_BED_CORRECTION_LEFT "W lewo [um]"
MSG_BED_CORRECTION_MENU "Korekta podkladki"
MSG_BED_CORRECTION_REAR "Do tylu [um]"
MSG_BED_CORRECTION_RESET "Reset"
MSG_BED_CORRECTION_RIGHT "W prawo [um]"
MSG_BED_DONE "Stolik OK."
MSG_BED_HEATING "Grzanie stolika.."
MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."
MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku."
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."
MSG_BEGIN_FILE_LIST "Begin file list"
MSG_CALIBRATE_BED "Kalibracja XYZ"
MSG_CALIBRATE_BED_RESET "Reset kalibr. XYZ"
MSG_CALIBRATE_E "Kalibruj E"
MSG_CALIBRATE_PINDA "Skalibrowac"
MSG_CALIBRATION_PINDA_MENU "Cieplna kalibr."
MSG_CARD_MENU "Druk z SD"
MSG_CLEAN_NOZZLE_E "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. "
MSG_CNG_SDCARD "Vymenit SD"
MSG_CONFIGURATION_VER " Last Updated: "
MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Oba wozki dojechaly do gornej ramy?"
MSG_CONFIRM_NOZZLE_CLEAN "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem."
MSG_CONTROL "Kontrola"
MSG_COOLDOWN "Wychlodzic"
MSG_CORRECTLY "Wymiana ok?"
MSG_CURRENT "Tylko aktualne"
MSG_DATE "Data:"
MSG_DISABLE_STEPPERS "Wylaczyc silniki"
MSG_DWELL "Sleep..."
MSG_E_CAL_KNOB "Prosze otaczac przycisk poki znacznik nie dosiegnie ciala ekstrudera. Potwierdzic przyciskiem."
MSG_END_FILE_LIST "End file list"
MSG_ENDSTOP_HIT "TRIGGERED"
MSG_ENDSTOP_OPEN "open"
MSG_ENDSTOPS_HIT "endstops hit: "
MSG_Enqueing "enqueing \""
MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
MSG_ERR_KILLED "Printer halted. kill() called!"
MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
MSG_ERROR "BLAD:"
MSG_EXTRUDER "Ekstruder"
MSG_EXTRUDER_1 "Ekstruder 1"
MSG_EXTRUDER_2 "Ekstruder 2"
MSG_EXTRUDER_3 "Ekstruder 3"
MSG_EXTRUDER_4 "Ekstruder 4"
MSG_FACTOR " \002 Fact"
MSG_FAN_SPEED "Predkosc went."
MSG_FIL_ADJUSTING "Przebiega wyrownanie filamentow. Prosze czekac."
MSG_FILAMENT_CLEAN "Czy kolor jest czysty?"
MSG_FILAMENT_LOADING_T0 "Wloz filament do ekstrudera 1. Potwierdz przyciskiem."
MSG_FILAMENT_LOADING_T1 "Wloz filament do ekstrudera 2. Potwierdz przyciskiem."
MSG_FILAMENT_LOADING_T2 "Wloz filament do ekstrudera 3. Potwierdz przyciskiem."
MSG_FILAMENT_LOADING_T3 "Wloz filament do ekstrudera 4. Potwierdz przyciskiem."
MSG_FILAMENTCHANGE "Wymienic filament"
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteracja "
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Szukam punktu kalibracyjnego podkladki"
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " z 4"
MSG_FINISHING_MOVEMENTS "Konczenie druku"
MSG_FLOW "Przeplyw"
MSG_FLOW0 "Prutok 0"
MSG_FLOW1 "Prutok 1"
MSG_FLOW2 "Prutok 2"
MSG_FOLLOW_CALIBRATION_FLOW "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest."
MSG_FREE_MEMORY " Free Memory: "
MSG_HEATING "Grzanie..."
MSG_HEATING_COMPLETE "Grzanie OK."
MSG_HOMEYZ "Kalibruj Z"
MSG_HOMEYZ_DONE "Kalibracja OK"
MSG_HOMEYZ_PROGRESS "Kalibruje Z"
MSG_CHANGE_EXTR "Zmienic ekstruder"
MSG_CHANGE_SUCCESS "Wymiana ok!"
MSG_CHANGING_FILAMENT "Wymiana filamentu"
MSG_CHOOSE_EXTRUDER "Wybierz ekstruder"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Poprawiam precyzyjnosc punktu kalibracyjnego"
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 4"
MSG_INIT_SDCARD "Inic. SD"
MSG_INSERT_FILAMENT "Wprowadz filament"
MSG_KILLED "KILLED. "
MSG_LANGUAGE_NAME "Polski"
MSG_LANGUAGE_SELECT "Wybor jezyka"
MSG_LEFT "Lewy:"
MSG_LOAD_ALL "Zalad. wszystkie"
MSG_LOAD_EPROM "Ulozit pamet"
MSG_LOAD_FILAMENT "Wprowadz filament"
MSG_LOAD_FILAMENT_1 "Zaladowac fil. 1"
MSG_LOAD_FILAMENT_2 "Zaladowac fil. 2"
MSG_LOAD_FILAMENT_3 "Zaladowac fil. 3"
MSG_LOAD_FILAMENT_4 "Zaladowac fil. 4"
MSG_LOADING_COLOR "Czyszcz. koloru"
MSG_LOADING_FILAMENT "Wprow. filamentu"
MSG_LOOSE_PULLEY "Kolo pasowe"
MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
MSG_M117_V2_CALIBRATION "M117 Kal. 1. warstwy"
MSG_M119_REPORT "Reporting endstop status"
MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
MSG_MAIN "Menu glowne"
MSG_MARK_FIL "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem."
MSG_MAX " \002 Max"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Okreslam wysokosc odniesienia punktu kalibracyjnego"
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
MSG_MEASURED_SKEW "Zmier. sciecie:"
MSG_MENU_CALIBRATION "Kalibracja"
MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
MSG_MIN " \002 Min"
MSG_MOVE_AXIS "Ruch osi"
MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
MSG_MOVE_E "Extruder"
MSG_MOVE_X "Przesunac X"
MSG_MOVE_Y "Przesunac Y"
MSG_MOVE_Z "Przesunac Z"
MSG_NEW_FIRMWARE_AVAILABLE "Wyszla nowa wersja firmware:"
MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosze zaktualizowac"
MSG_NO "Nie"
MSG_NO_CARD "Brak karty SD"
MSG_NO_MOVE "No move."
MSG_NOT_COLOR "Kolor zanieczysz."
MSG_NOT_LOADED "Brak filamentu"
MSG_NOZZLE "Dysza"
MSG_NOZZLE1 "Tryska2"
MSG_NOZZLE2 "Tryska3"
MSG_OK "ok"
MSG_PAPER "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
MSG_PAUSE_PRINT "Przerwac druk"
MSG_PICK_Z "Vyberte vytisk"
MSG_PID_EXTRUDER "Kalibracja PID"
MSG_PID_FINISHED "Kal. PID zakonczona"
MSG_PID_RUNNING "Kal. PID"
MSG_PINDA_NOT_CALIBRATED "Cieplna kalibracja nie byla przeprowadzona"
MSG_PINDA_PREHEAT "Grzanie PINDA"
MSG_PLA_FILAMENT_LOADED "Fialment PLA jest zaladowany?"
MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
MSG_PLEASE_LOAD_PLA "Prosze, najpierw zaladuj filament PLA."
MSG_PLEASE_WAIT "Prosze czekac"
MSG_POWERUP "PowerUp"
MSG_PREHEAT "Grzanie"
MSG_PREHEAT_NOZZLE "Nagrzej dysze!"
MSG_PREPARE_FILAMENT "Przygotuj filament"
MSG_PREPARE_FILAMENT "Przygotuj filament"
MSG_PRESS "Nacisnij przycisk"
MSG_PRINT_ABORTED "Druk przerwany"
MSG_PRINT_PAUSED "Druk zatrzymany"
MSG_PRUSA3D "prusa3d.cz"
MSG_PRUSA3D_FORUM "forum.prusa3d.cz"
MSG_PRUSA3D_HOWTO "howto.prusa3d.cz"
MSG_REBOOT "Restart drukarki"
MSG_REFRESH "\xF8" "Obnovit"
MSG_RESEND "Resend: "
MSG_RESTORE_FAILSAFE "Obnovit vychozi"
MSG_RESUME_PRINT "Kontynuowac"
MSG_RESUMING "Wznowienie druku"
MSG_RESUMING_PRINT "Wznawianie druku"
MSG_RIGHT "Prawy:"
MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
MSG_SD_CARD_OK "SD card ok"
MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
MSG_SD_FILE_OPENED "File opened: "
MSG_SD_FILE_SELECTED "File selected"
MSG_SD_INIT_FAIL "SD init fail"
MSG_SD_INSERTED "Karta wlozona"
MSG_SD_NOT_PRINTING "Not SD printing"
MSG_SD_OPEN_FILE_FAIL "open failed, File: "
MSG_SD_OPENROOT_FAIL "openRoot failed"
MSG_SD_PRINTING_BYTE "SD printing byte "
MSG_SD_REMOVED "Karta wyjeta"
MSG_SD_VOL_INIT_FAIL "volume.init failed"
MSG_SD_WORKDIR_FAIL "workDir open failed"
MSG_SD_WRITE_TO_FILE "Writing to file: "
MSG_SELFTEST "Selftest "
MSG_SELFTEST_BEDHEATER "Bed / Heater"
MSG_SELFTEST_COOLING_FAN "Przedni went. druku?"
MSG_SELFTEST_ENDSTOP "Endstop"
MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
MSG_SELFTEST_ENDSTOPS "Endstops"
MSG_SELFTEST_ERROR "Selftest error !"
MSG_SELFTEST_EXTRUDER_FAN "Lewy went na dysze?"
MSG_SELFTEST_FAILED "Selftest nieudany"
MSG_SELFTEST_FAN "Test wentylatora"
MSG_SELFTEST_FAN_NO "Nie kreci sie"
MSG_SELFTEST_FAN_YES "Kreci sie"
MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
MSG_SELFTEST_CHECK_ALLCORRECT "Wszystko OK "
MSG_SELFTEST_CHECK_BED "Kontrola bed "
MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend "
MSG_SELFTEST_CHECK_X "Kontrola X axis "
MSG_SELFTEST_CHECK_Y "Kontrola Y axis "
MSG_SELFTEST_CHECK_Z "Kontrola Z axis "
MSG_SELFTEST_MOTOR "Silnik"
MSG_SELFTEST_NOTCONNECTED "Nie podlaczono "
MSG_SELFTEST_OK "Self test OK"
MSG_SELFTEST_PLEASECHECK "Skontroluj :"
MSG_SELFTEST_START "Self test start "
MSG_SELFTEST_WIRINGERROR "Blad polaczenia"
MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
MSG_SET_HOME_OFFSETS "Nastav pocatek home"
MSG_SET_ORIGIN "Nastav pocatek"
MSG_SET_TEMPERATURE "Ustawic temperature"
MSG_SETTINGS "Ustawienia"
MSG_SEVERE_SKEW "Ostre sciecie:"
MSG_SHOW_END_STOPS "Pokaz krancowki"
MSG_SILENT_MODE_OFF "Tryb[w wydajnosc]"
MSG_SILENT_MODE_ON "Tryb [cichy]"
MSG_SLIGHT_SKEW "Lekkie sciecie:"
MSG_SPEED "Predkosc"
MSG_STATISTICS "Statystyka "
MSG_STATS_FILAMENTUSED "Filament : "
MSG_STATS_PRINTTIME "Czas druku : "
MSG_STATS_TOTALFILAMENT "Filament lacznie :"
MSG_STATS_TOTALPRINTTIME "Czas calkowity :"
MSG_STEPPER_TOO_HIGH "Steprate too high: "
MSG_STOP_PRINT "Zatrzymac druk"
MSG_STOPPED "STOPPED. "
MSG_STORE_EPROM "Store memory"
MSG_SUPPORT "Pomoc"
MSG_SWITCH_PS_OFF "Zapnout zdroj"
MSG_SWITCH_PS_ON "Vypnout zdroj"
MSG_TAKE_EFFECT " wprow. zmian"
MSG_TEMP_CALIBRATION "Ciepl. kal. "
MSG_TEMP_CALIBRATION_DONE "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
MSG_TEMP_CALIBRATION_OFF "Ciepl. kal. [OFF]"
MSG_TEMP_CALIBRATION_ON "Ciepl. kal. [ON]"
MSG_TEMPERATURE "Temperatura"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "karta SD [normal]"
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "karta SD[FlshAir]"
MSG_TUNE "Nastroic"
MSG_UNLOAD_ALL "Wyjac wszystkie"
MSG_UNLOAD_FILAMENT "Wyjac filament"
MSG_UNLOAD_FILAMENT_1 "Wyjac filament 1"
MSG_UNLOAD_FILAMENT_2 "Wyjac filament 2"
MSG_UNLOAD_FILAMENT_3 "Wyjac filament 3"
MSG_UNLOAD_FILAMENT_4 "Wyjac filament 4"
MSG_UNLOADING_FILAMENT "Wysuwam filament"
MSG_USB_PRINTING "Druk z USB "
MSG_USED "Uzyte przy druku"
MSG_USERWAIT "Wait for user..."
MSG_V2_CALIBRATION "Kal. 1. warstwy"
MSG_VOLUMETRIC "Filament"
MSG_VOLUMETRIC_ENABLED "E in mm3"
MSG_WAITING_TEMP "Oczekiwanie na wychlodzenie dyszy i podkladki."
MSG_WATCH "Informacje"
MSG_WIZARD "Wizard"
MSG_WIZARD_CALIBRATION_FAILED "Prosze sprawdz nasz poradnik i napraw problem. Potem przywroc Wizard restartujac drukarke."
MSG_WIZARD_CLEAN_HEATBED "Prosze oczysc stolik i nacisnij guzik."
MSG_WIZARD_DONE "Gotowe. Udanego druku!"
MSG_WIZARD_FILAMENT_LOADED "Filament jest zaladowany?"
MSG_WIZARD_HEATING "Nagrzewanie dyszy. Prosze czekac."
MSG_WIZARD_INSERT_CORRECT_FILAMENT "Prosze zaladuj filament PLA i przywroc Wizard przez restart drukarki."
MSG_WIZARD_LOAD_FILAMENT "Prosze umiesc filament PLA w ekstruderze i nacisnij przycisk by zaladowac."
MSG_WIZARD_PLA_FILAMENT "Czy to filament PLA?"
MSG_WIZARD_QUIT "Zawsze mozesz przywrocic Wizard przez Kalibracja -> Wizard."
MSG_WIZARD_REPEAT_V2_CAL "Chcesz powtorzyc ostatni krok i przestawic odleglosc miedzy dysza a stolikiem?"
MSG_WIZARD_RERUN "Wlaczenie Wizard usunie obecne dane kalibracyjne i zacznie od nowa. Kontynuowac?"
MSG_WIZARD_SELFTEST "Najpierw wlacze autotest w celu kontrolli najczestszych problemow z montazem."
MSG_WIZARD_V2_CAL "Kalibruje odleglosc miedzy koncowka dyszy a stolikiem."
MSG_WIZARD_V2_CAL_2 "Zaczne drukowac linie. Stopniowo opuszczaj dysze przekrecajac guzik, poki nie uzyskasz optymalnej wysokosci. Sprawdz obrazki w naszym poradniku w rozdz. Kalibracja"
MSG_WIZARD_WELCOME "Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z instalacja?"
MSG_WIZARD_WILL_PREHEAT "Nagrzewam dysze dla PLA."
MSG_WIZARD_XYZ_CAL "Wlaczam kalibracje xyz. Zajmie to ok. 12 min."
MSG_WIZARD_Z_CAL "Wlaczam kalibracje z."
MSG_XYZ_DETAILS "Szczegoly kal.XYZ"
MSG_Y_DISTANCE_FROM_MIN "Odleglosc Y od min.:"
MSG_YES "Tak"
WELCOME_MSG CUSTOM_MENDEL_NAME " gotowa"

399
lang_upgrade/msgs_usage.txt Normal file
View file

@ -0,0 +1,399 @@
MSG_BABYSTEP_X 0
MSG_BABYSTEP_Y 0
MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ 0
MSG_CONTROL 0
MSG_CRASH_DETECTED2 0
MSG_FIL_ADJUSTING 0
MSG_FLOW0 0
MSG_FLOW1 0
MSG_FLOW2 0
MSG_FW_VERSION_RC 0
MSG_INFO_FILAMENT_XDIFF 0
MSG_INFO_FILAMENT_YDIFF 0
MSG_LANGUAGE_NAME 0
MSG_LOAD_EPROM 0
MSG_MOTION 0
MSG_REBOOT 0
MSG_RECTRACT 0
MSG_RESTORE_FAILSAFE 0
MSG_SD_NOT_PRINTING 0
MSG_SERIAL_ERROR_MENU_STRUCTURE 0
MSG_SET_HOME_OFFSETS 0
MSG_SET_ORIGIN 0
MSG_STEPPER_TIMER_OVERFLOW_ERROR 0
MSG_STORE_EPROM 0
MSG_SWITCH_PS_OFF 0
MSG_SWITCH_PS_ON 0
MSG_TAKE_EFFECT 0
MSG_USB_PRINTING 0
MSG_VOLUMETRIC 0
MSG_VOLUMETRIC_ENABLED 0
MSG_ACTIVE_EXTRUDER 1
MSG_ADJUSTZ 1
MSG_AUTHOR 1
MSG_AUTOLOAD_FILAMENT 1
MSG_AUTOLOADING_ENABLED 1
MSG_AUTOLOADING_ONLY_IF_FSENS_ON 1
MSG_BABYSTEPPING_X 1
MSG_BABYSTEPPING_Y 1
MSG_BABYSTEPPING_Z 1
MSG_BED_CORRECTION_FRONT 1
MSG_BED_CORRECTION_LEFT 1
MSG_BED_CORRECTION_MENU 1
MSG_BED_CORRECTION_REAR 1
MSG_BED_CORRECTION_RESET 1
MSG_BED_CORRECTION_RIGHT 1
MSG_BED_HEATING_SAFETY_DISABLED 1
MSG_BED_LEVELING_FAILED_POINT_HIGH 1
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED 1
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR 1
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR 1
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR 1
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT 1
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND 1
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME 1
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD 1
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR 1
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR 1
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR 1
MSG_BEGIN_FILE_LIST 1
MSG_CALIBRATE_BED 1
MSG_CALIBRATE_BED_RESET 1
MSG_CALIBRATE_E 1
MSG_CALIBRATE_PINDA 1
MSG_CALIBRATION_PINDA_MENU 1
MSG_CLEAN_NOZZLE_E 1
MSG_CNG_SDCARD 1
MSG_CONFIGURATION_VER 1
MSG_CONFIRM_CARRIAGE_AT_THE_TOP 1
MSG_CORRECTLY 1
MSG_COUNT_X 1
MSG_CRASH_DET_ONLY_IN_NORMAL 1
MSG_CRASH_DET_STEALTH_FORCE_OFF 1
MSG_CURRENT 1
MSG_DATE 1
MSG_DEFAULT_SETTINGS_LOADED 1
MSG_DISABLE_STEPPERS 1
MSG_DWELL 1
MSG_E_CAL_KNOB 1
MSG_END_FILE_LIST 1
MSG_ERR_COLD_EXTRUDE_STOP 1
MSG_ERR_CHECKSUM_MISMATCH 1
MSG_ERR_KILLED 1
MSG_ERR_LINE_NO 1
MSG_ERR_LONG_EXTRUDE_STOP 1
MSG_ERR_NO_CHECKSUM 1
MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM 1
MSG_ERR_NO_THERMISTORS 1
MSG_EXTRUDER_1 1
MSG_EXTRUDER_2 1
MSG_EXTRUDER_3 1
MSG_EXTRUDER_4 1
MSG_EXTRUDER_CORRECTION 1
MSG_EXTRUDER_CORRECTION_OFF 1
MSG_FACTOR 1
MSG_FANS_CHECK_OFF 1
MSG_FANS_CHECK_ON 1
MSG_FILAMENT_SENSOR 1
MSG_FILE_CNT 1
MSG_FILE_INCOMPLETE 1
MSG_FILE_PRINTED 1
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION 1
MSG_FLOW 1
MSG_FORCE_SELFTEST 1
MSG_FREE_MEMORY 1
MSG_FSENS_AUTOLOAD_OFF 1
MSG_FSENS_AUTOLOAD_ON 1
MSG_FSENS_NOT_RESPONDING 1
MSG_FSENSOR_NA 1
MSG_FW_VERSION_ALPHA 1
MSG_FW_VERSION_BETA 1
MSG_FW_VERSION_UNKNOWN 1
MSG_HOMEYZ_DONE 1
MSG_HOMEYZ_PROGRESS 1
MSG_CHANGE_EXTR 1
MSG_CHANGE_SUCCESS 1
MSG_CHANGED_BOTH 1
MSG_CHANGED_MOTHERBOARD 1
MSG_CHANGED_PRINTER 1
MSG_CHANGING_FILAMENT 1
MSG_CHECK_IDLER 1
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 1
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 1
MSG_INFO_EXTRUDER 1
MSG_INFO_NOZZLE_FAN 1
MSG_INFO_PRINT_FAN 1
MSG_INIT_SDCARD 1
MSG_INSERT_FILAMENT 1
MSG_INVALID_EXTRUDER 1
MSG_KILLED 1
MSG_LANGUAGE_SELECT 1
MSG_LEFT 1
MSG_LOAD_ALL 1
MSG_LOAD_FILAMENT_1 1
MSG_LOAD_FILAMENT_2 1
MSG_LOAD_FILAMENT_3 1
MSG_LOAD_FILAMENT_4 1
MSG_LOADING_COLOR 1
MSG_LOOSE_PULLEY 1
MSG_M104_INVALID_EXTRUDER 1
MSG_M105_INVALID_EXTRUDER 1
MSG_M109_INVALID_EXTRUDER 1
MSG_M119_REPORT 1
MSG_M200_INVALID_EXTRUDER 1
MSG_M218_INVALID_EXTRUDER 1
MSG_M221_INVALID_EXTRUDER 1
MSG_MARK_FIL 1
MSG_MAX 1
MSG_MEASURED_OFFSET 1
MSG_MEASURED_SKEW 1
MSG_MENU_BELT_STATUS 1
MSG_MENU_TEMPERATURES 1
MSG_MENU_VOLTAGES 1
MSG_MESH_BED_LEVELING 1
MSG_MIN 1
MSG_MOVE_AXIS 1
MSG_MOVE_CARRIAGE_TO_THE_TOP 1
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z 1
MSG_MOVE_E 1
MSG_MOVE_X 1
MSG_MOVE_Y 1
MSG_MOVE_Z 1
MSG_NEW_FIRMWARE_AVAILABLE 1
MSG_NEW_FIRMWARE_PLEASE_UPGRADE 1
MSG_NO_CARD 1
MSG_NO_MOVE 1
MSG_NOT_COLOR 1
MSG_NOT_LOADED 1
MSG_NOZZLE1 1
MSG_NOZZLE2 1
MSG_PAUSE_PRINT 1
MSG_PICK_Z 1
MSG_PID_EXTRUDER 1
MSG_PID_FINISHED 1
MSG_PID_RUNNING 1
MSG_PINDA_NOT_CALIBRATED 1
MSG_PINDA_PREHEAT 1
MSG_PLA_FILAMENT_LOADED 1
MSG_PLANNER_BUFFER_BYTES 1
MSG_PLEASE_LOAD_PLA 1
MSG_PREHEAT 1
MSG_PREPARE_FILAMENT 1
MSG_PRESS 1
MSG_PRESS_TO_PREHEAT 1
MSG_PRINT_PAUSED 1
MSG_PRINTER_DISCONNECTED 1
MSG_PRUSA3D 1
MSG_PRUSA3D_FORUM 1
MSG_PRUSA3D_HOWTO 1
MSG_RECOVERING_PRINT 1
MSG_RESEND 1
MSG_RESUME_PRINT 1
MSG_RESUMING 1
MSG_RESUMING_PRINT 1
MSG_RIGHT 1
MSG_SD_CANT_ENTER_SUBDIR 1
MSG_SD_CANT_OPEN_SUBDIR 1
MSG_SD_CARD_OK 1
MSG_SD_FILE_OPENED 1
MSG_SD_FILE_SELECTED 1
MSG_SD_INIT_FAIL 1
MSG_SD_INSERTED 1
MSG_SD_OPENROOT_FAIL 1
MSG_SD_PRINTING_BYTE 1
MSG_SD_REMOVED 1
MSG_SD_SIZE 1
MSG_SD_VOL_INIT_FAIL 1
MSG_SD_WRITE_TO_FILE 1
MSG_SECOND_SERIAL_OFF 1
MSG_SECOND_SERIAL_ON 1
MSG_SELFTEST 1
MSG_SELFTEST_AXIS 1
MSG_SELFTEST_AXIS_LENGTH 1
MSG_SELFTEST_BEDHEATER 1
MSG_SELFTEST_ENDSTOP 1
MSG_SELFTEST_ENDSTOP_NOTHIT 1
MSG_SELFTEST_ENDSTOPS 1
MSG_SELFTEST_ERROR 1
MSG_SELFTEST_EXTRUDER_FAN_SPEED 1
MSG_SELFTEST_FANS 1
MSG_SELFTEST_FILAMENT_SENSOR 1
MSG_SELFTEST_HEATERTHERMISTOR 1
MSG_SELFTEST_CHECK_ALLCORRECT 1
MSG_SELFTEST_CHECK_ENDSTOPS 1
MSG_SELFTEST_CHECK_HOTEND 1
MSG_SELFTEST_CHECK_X 1
MSG_SELFTEST_CHECK_Y 1
MSG_SELFTEST_CHECK_Z 1
MSG_SELFTEST_NOTCONNECTED 1
MSG_SELFTEST_OK 1
MSG_SELFTEST_PLEASECHECK 1
MSG_SELFTEST_PRINT_FAN_SPEED 1
MSG_SELFTEST_START 1
MSG_SELFTEST_SWAPPED 1
MSG_SET_TEMPERATURE 1
MSG_SEVERE_SKEW 1
MSG_SHOW_END_STOPS 1
MSG_SLIGHT_SKEW 1
MSG_SORT_ALPHA 1
MSG_SORT_NONE 1
MSG_SORT_TIME 1
MSG_SORTING 1
MSG_SPEED 1
MSG_STACK_ERROR 1
MSG_STATISTICS 1
MSG_STATS_FILAMENTUSED 1
MSG_STATS_PRINTTIME 1
MSG_STATS_TOTALFILAMENT 1
MSG_STATS_TOTALPRINTTIME 1
MSG_STEPPER_TOO_HIGH 1
MSG_SUPPORT 1
MSG_TEMP_CAL_FAILED 1
MSG_TEMP_CAL_WARNING 1
MSG_TEMP_CALIBRATION_OFF 1
MSG_TEMP_CALIBRATION_ON 1
MSG_TEMPERATURE 1
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF 1
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON 1
MSG_TUNE 1
MSG_UNLOAD_ALL 1
MSG_UNLOAD_FILAMENT_1 1
MSG_UNLOAD_FILAMENT_2 1
MSG_UNLOAD_FILAMENT_3 1
MSG_UNLOAD_FILAMENT_4 1
MSG_UNLOAD_SUCCESSFUL 1
MSG_USED 1
MSG_USERWAIT 1
MSG_V2_CALIBRATION 1
MSG_WAITING_TEMP 1
MSG_WAITING_TEMP_PINDA 1
MSG_WIZARD 1
MSG_WIZARD_CLEAN_HEATBED 1
MSG_WIZARD_FILAMENT_LOADED 1
MSG_WIZARD_INSERT_CORRECT_FILAMENT 1
MSG_WIZARD_LOAD_FILAMENT 1
MSG_WIZARD_PLA_FILAMENT 1
MSG_WIZARD_REPEAT_V2_CAL 1
MSG_WIZARD_RERUN 1
MSG_WIZARD_SELFTEST 1
MSG_WIZARD_V2_CAL 1
MSG_WIZARD_V2_CAL_2 1
MSG_WIZARD_WELCOME 1
MSG_WIZARD_WILL_PREHEAT 1
MSG_WIZARD_XYZ_CAL 1
MSG_WIZARD_Z_CAL 1
MSG_X_MAX 1
MSG_X_MIN 1
MSG_XYZ_DETAILS 1
MSG_Y_DISTANCE_FROM_MIN 1
MSG_Y_MAX 1
MSG_Y_MIN 1
MSG_AUTO_HOME 2
MSG_AUTO_MODE_ON 2
MSG_BABYSTEP_Z 2
MSG_BABYSTEP_Z_NOT_SET 2
MSG_BED_DONE 2
MSG_BED_HEATING 2
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED 2
MSG_BROWNOUT_RESET 2
MSG_CALIBRATE_Z_AUTO 2
MSG_CONFIRM_NOZZLE_CLEAN 2
MSG_COOLDOWN 2
MSG_CRASH_DETECTED 2
MSG_CRASHDETECT_NA 2
MSG_CRASHDETECT_OFF 2
MSG_CRASHDETECT_ON 2
MSG_Enqueing 2
MSG_ERR_STOPPED 2
MSG_EXTERNAL_RESET 2
MSG_FAN_SPEED 2
MSG_FILAMENT_CLEAN 2
MSG_FILAMENT_LOADING_T0 2
MSG_FILAMENT_LOADING_T1 2
MSG_FILAMENT_LOADING_T2 2
MSG_FILAMENT_LOADING_T3 2
MSG_FILAMENTCHANGE 2
MSG_FILE_SAVED 2
MSG_FINISHING_MOVEMENTS 2
MSG_FOLLOW_CALIBRATION_FLOW 2
MSG_FSENS_AUTOLOAD_NA 2
MSG_FSENSOR_OFF 2
MSG_FSENSOR_ON 2
MSG_HEATING 2
MSG_HEATING_COMPLETE 2
MSG_HOMEYZ 2
MSG_LOAD_FILAMENT 2
MSG_M117_V2_CALIBRATION 2
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 2
MSG_MENU_CALIBRATION 2
MSG_NOZZLE 2
MSG_PAPER 2
MSG_PLACE_STEEL_SHEET 2
MSG_POWERUP 2
MSG_PRESS_TO_UNLOAD 2
MSG_PULL_OUT_FILAMENT 2
MSG_RECOVER_PRINT 2
MSG_REMOVE_STEEL_SHEET 2
MSG_SD_ERR_WRITE_TO_FILE 2
MSG_SD_WORKDIR_FAIL 2
MSG_SELFTEST_CHECK_BED 2
MSG_SELFTEST_CHECK_FSENSOR 2
MSG_SILENT_MODE_ON 2
MSG_SOFTWARE_RESET 2
MSG_STEALTH_MODE_OFF 2
MSG_STEALTH_MODE_ON 2
MSG_STOPPED 2
MSG_TEMP_CALIBRATION_DONE 2
MSG_UNKNOWN_COMMAND 2
MSG_WATCH 2
MSG_WATCHDOG_RESET 2
MSG_WIZARD_DONE 2
MSG_WIZARD_QUIT 2
MSG_Z_MAX 2
MSG_Z_MIN 2
MSG_ZPROBE_OUT 2
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 3
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 3
MSG_CHOOSE_EXTRUDER 3
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 3
MSG_PRINT_ABORTED 3
MSG_REFRESH 3
MSG_SD_OPEN_FILE_FAIL 3
MSG_SELFTEST_COOLING_FAN 3
MSG_SELFTEST_EXTRUDER_FAN 3
MSG_SELFTEST_FAILED 3
MSG_SELFTEST_FAN_NO 3
MSG_SELFTEST_FAN_YES 3
MSG_SELFTEST_MOTOR 3
MSG_STEEL_SHEET_CHECK 3
MSG_STOP_PRINT 3
MSG_TEMP_CALIBRATION 3
MSG_UNLOAD_FILAMENT 3
MSG_WIZARD_CALIBRATION_FAILED 3
MSG_WIZARD_HEATING 3
MSG_ZPROBE_ZOFFSET 3
MSG_ENDSTOPS_HIT 4
MSG_EXTRUDER 4
MSG_ON 4
MSG_POSITION_UNKNOWN 4
MSG_SELFTEST_FAN 4
MSG_SILENT_MODE_OFF 4
MSG_UNLOADING_FILAMENT 4
MSG_BED 5
MSG_BED_LEVELING_FAILED_POINT_LOW 5
MSG_LOADING_FILAMENT 5
MSG_OFF 5
MSG_SELFTEST_WIRINGERROR 5
MSG_SETTINGS 5
MSG_ALL 6
MSG_ENDSTOP_HIT 6
MSG_ENDSTOP_OPEN 6
MSG_NO 6
MSG_CARD_MENU 7
MSG_PLEASE_WAIT 7
MSG_YES 7
MSG_OK 8
MSG_ERROR 9
MSG_PREHEAT_NOZZLE 9
MSG_MAIN 12
WELCOME_MSG 17

33
lang_upgrade/readme.txt Normal file
View file

@ -0,0 +1,33 @@
lang_upgrade - scripts for migration to new multilanguage support design
upgrade.sh - entire process:
Run scripts: clean.sh, make_msgs.sh, find_msgs.sh, make_source.sh.
Backup (move) all language*.h and language*.cpp files from source to folder '../lang_backup'.
Copy folder ./source/*.* to ../Firmware, new files will be messages.h, messages.c, language.h, language.c and other source will be replaced.
After this step should be source compilable in english version, LANG_MODE in config.h is set to 0 (primary language only)
0. clean.sh
delete all output files
1. make_msgs.sh
Process all language_xx.h files and extract informations to msgs_xx.txt files in simple format.
Every line in msgs_en.txt has following format: MSG_xx c=cc r=rr "text".
Every line in other msgs_xx.txt has simpler format: MSG_xx "text".
MSG_xx is original message identifier, cc is column count (originaly length) and rr is row count (originaly lines).
Output files msgs_xx.txt are sorted by message identifier (ascending order).
make_msgs.sh also reports number of messages in each language_xx.h file and total number of characters in program memory.
2. find_msgs.sh
Find usage of each message and output listing in to file msgs_usage.txt in format: MSG_xx nn.
MSG_xx is identifier, nn is number of occurrences. Output is sorted by number of occurrences (ascending order).
Generate filtered msgs_en.txt and msgs_common.txt files. Each file is sorted to three output files - unused, used once and used more.
Output files will be:
msgs_common_unused.txt, msgs_common_used_more.txt, msgs_common_used_once.txt
msgs_en_unused.txt, msgs_en_used_more.txt, msgs_en_used_once.txt
3. make_source.sh
Copy all source files to folder ./source
Replace all messages used once in all ./source/*.c* files directly with the english version string constant and comment at end of line.
Generate messages.h and messages.c source files with messages used twice and more.
Replace line '' in Marlin_main.cpp with comment.

13
lang_upgrade/replace_common.out Normal file
View file

@ -0,0 +1,13 @@
MSG_ACTIVE_EXTRUDER OK
MSG_AUTHOR OK
MSG_COUNT_X OK
MSG_ERR_LINE_NO OK
MSG_ERR_LONG_EXTRUDE_STOP OK
MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM OK
MSG_FILE_PRINTED OK
MSG_INVALID_EXTRUDER OK
MSG_SD_SIZE OK
MSG_X_MAX OK
MSG_X_MIN OK
MSG_Y_MAX OK
MSG_Y_MIN OK

247
lang_upgrade/replace_en.out Normal file
View file

@ -0,0 +1,247 @@
MSG_ADJUSTZ OK
MSG_AUTOLOAD_FILAMENT OK
MSG_AUTOLOADING_ENABLED OK
MSG_AUTOLOADING_ONLY_IF_FSENS_ON OK
MSG_BABYSTEPPING_X OK
MSG_BABYSTEPPING_Y OK
MSG_BABYSTEPPING_Z OK
MSG_BED_CORRECTION_FRONT OK
MSG_BED_CORRECTION_LEFT OK
MSG_BED_CORRECTION_MENU OK
MSG_BED_CORRECTION_REAR OK
MSG_BED_CORRECTION_RESET OK
MSG_BED_CORRECTION_RIGHT OK
MSG_BED_HEATING_SAFETY_DISABLED OK
MSG_BED_LEVELING_FAILED_POINT_HIGH OK
MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED OK
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR OK
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR OK
MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR OK
MSG_BED_SKEW_OFFSET_DETECTION_PERFECT OK
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND OK
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME OK
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD OK
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR OK
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR OK
MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR OK
MSG_BEGIN_FILE_LIST OK
MSG_CALIBRATE_BED OK
MSG_CALIBRATE_BED_RESET OK
MSG_CALIBRATE_E OK
MSG_CALIBRATE_PINDA OK
MSG_CALIBRATION_PINDA_MENU OK
MSG_CLEAN_NOZZLE_E OK
MSG_CNG_SDCARD OK
MSG_CONFIGURATION_VER OK
MSG_CONFIRM_CARRIAGE_AT_THE_TOP OK
MSG_CORRECTLY OK
MSG_CRASH_DET_ONLY_IN_NORMAL OK
MSG_CRASH_DET_STEALTH_FORCE_OFF OK
MSG_CURRENT OK
MSG_DATE OK
MSG_DEFAULT_SETTINGS_LOADED OK
MSG_DISABLE_STEPPERS OK
MSG_DWELL OK
MSG_E_CAL_KNOB OK
MSG_END_FILE_LIST OK
MSG_ERR_COLD_EXTRUDE_STOP OK
MSG_ERR_CHECKSUM_MISMATCH OK
MSG_ERR_KILLED OK
MSG_ERR_NO_CHECKSUM OK
MSG_ERR_NO_THERMISTORS OK
MSG_EXTRUDER_1 OK
MSG_EXTRUDER_2 OK
MSG_EXTRUDER_3 OK
MSG_EXTRUDER_4 OK
MSG_EXTRUDER_CORRECTION OK
MSG_EXTRUDER_CORRECTION_OFF OK
MSG_FACTOR OK
MSG_FANS_CHECK_OFF OK
MSG_FANS_CHECK_ON OK
MSG_FILAMENT_SENSOR OK
MSG_FILE_CNT OK
MSG_FILE_INCOMPLETE OK
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION OK
MSG_FLOW OK
MSG_FORCE_SELFTEST OK
MSG_FREE_MEMORY OK
MSG_FSENS_AUTOLOAD_OFF OK
MSG_FSENS_AUTOLOAD_ON OK
MSG_FSENS_NOT_RESPONDING OK
MSG_FSENSOR_NA OK
MSG_FW_VERSION_ALPHA OK
MSG_FW_VERSION_BETA OK
MSG_FW_VERSION_UNKNOWN OK
MSG_HOMEYZ_DONE OK
MSG_HOMEYZ_PROGRESS OK
MSG_CHANGE_EXTR OK
MSG_CHANGE_SUCCESS OK
MSG_CHANGED_BOTH OK
MSG_CHANGED_MOTHERBOARD OK
MSG_CHANGED_PRINTER OK
MSG_CHANGING_FILAMENT OK
MSG_CHECK_IDLER OK
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 OK
MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 OK
MSG_INFO_EXTRUDER OK
MSG_INFO_NOZZLE_FAN OK
MSG_INFO_PRINT_FAN OK
MSG_INIT_SDCARD OK
MSG_INSERT_FILAMENT OK
MSG_KILLED OK
MSG_LANGUAGE_SELECT OK
MSG_LEFT OK
MSG_LOAD_ALL OK
MSG_LOAD_FILAMENT_1 OK
MSG_LOAD_FILAMENT_2 OK
MSG_LOAD_FILAMENT_3 OK
MSG_LOAD_FILAMENT_4 OK
MSG_LOADING_COLOR OK
MSG_LOOSE_PULLEY OK
MSG_M104_INVALID_EXTRUDER OK
MSG_M105_INVALID_EXTRUDER OK
MSG_M109_INVALID_EXTRUDER OK
MSG_M119_REPORT OK
MSG_M200_INVALID_EXTRUDER OK
MSG_M218_INVALID_EXTRUDER OK
MSG_M221_INVALID_EXTRUDER OK
MSG_MARK_FIL OK
MSG_MAX OK
MSG_MEASURED_OFFSET OK
MSG_MEASURED_SKEW OK
MSG_MENU_BELT_STATUS OK
MSG_MENU_TEMPERATURES OK
MSG_MENU_VOLTAGES OK
MSG_MESH_BED_LEVELING OK
MSG_MIN OK
MSG_MOVE_AXIS OK
MSG_MOVE_CARRIAGE_TO_THE_TOP OK
MSG_MOVE_CARRIAGE_TO_THE_TOP_Z OK
MSG_MOVE_E OK
MSG_MOVE_X OK
MSG_MOVE_Y OK
MSG_MOVE_Z OK
MSG_NEW_FIRMWARE_AVAILABLE OK
MSG_NEW_FIRMWARE_PLEASE_UPGRADE OK
MSG_NO_CARD OK
MSG_NO_MOVE OK
MSG_NOT_COLOR OK
MSG_NOT_LOADED OK
MSG_NOZZLE1 OK
MSG_NOZZLE2 OK
MSG_PAUSE_PRINT OK
MSG_PICK_Z OK
MSG_PID_EXTRUDER OK
MSG_PID_FINISHED OK
MSG_PID_RUNNING OK
MSG_PINDA_NOT_CALIBRATED OK
MSG_PINDA_PREHEAT OK
MSG_PLA_FILAMENT_LOADED OK
MSG_PLANNER_BUFFER_BYTES OK
MSG_PLEASE_LOAD_PLA OK
MSG_PREHEAT OK
MSG_PREPARE_FILAMENT OK
MSG_PRESS OK
MSG_PRESS_TO_PREHEAT OK
MSG_PRINT_PAUSED OK
MSG_PRINTER_DISCONNECTED OK
MSG_PRUSA3D OK
MSG_PRUSA3D_FORUM OK
MSG_PRUSA3D_HOWTO OK
MSG_RECOVERING_PRINT OK
MSG_RESEND OK
MSG_RESUME_PRINT OK
MSG_RESUMING OK
MSG_RESUMING_PRINT OK
MSG_RIGHT OK
MSG_SD_CANT_ENTER_SUBDIR OK
MSG_SD_CANT_OPEN_SUBDIR OK
MSG_SD_CARD_OK OK
MSG_SD_FILE_OPENED OK
MSG_SD_FILE_SELECTED OK
MSG_SD_INIT_FAIL OK
MSG_SD_INSERTED OK
MSG_SD_OPENROOT_FAIL OK
MSG_SD_PRINTING_BYTE OK
MSG_SD_REMOVED OK
MSG_SD_VOL_INIT_FAIL OK
MSG_SD_WRITE_TO_FILE OK
MSG_SECOND_SERIAL_OFF OK
MSG_SECOND_SERIAL_ON OK
MSG_SELFTEST OK
MSG_SELFTEST_AXIS OK
MSG_SELFTEST_AXIS_LENGTH OK
MSG_SELFTEST_BEDHEATER OK
MSG_SELFTEST_ENDSTOP OK
MSG_SELFTEST_ENDSTOP_NOTHIT OK
MSG_SELFTEST_ENDSTOPS OK
MSG_SELFTEST_ERROR OK
MSG_SELFTEST_EXTRUDER_FAN_SPEED OK
MSG_SELFTEST_FANS OK
MSG_SELFTEST_FILAMENT_SENSOR OK
MSG_SELFTEST_HEATERTHERMISTOR OK
MSG_SELFTEST_CHECK_ALLCORRECT OK
MSG_SELFTEST_CHECK_ENDSTOPS OK
MSG_SELFTEST_CHECK_HOTEND OK
MSG_SELFTEST_CHECK_X OK
MSG_SELFTEST_CHECK_Y OK
MSG_SELFTEST_CHECK_Z OK
MSG_SELFTEST_NOTCONNECTED OK
MSG_SELFTEST_OK OK
MSG_SELFTEST_PLEASECHECK OK
MSG_SELFTEST_PRINT_FAN_SPEED OK
MSG_SELFTEST_START OK
MSG_SELFTEST_SWAPPED OK
MSG_SET_TEMPERATURE OK
MSG_SEVERE_SKEW OK
MSG_SHOW_END_STOPS OK
MSG_SLIGHT_SKEW OK
MSG_SORT_ALPHA OK
MSG_SORT_NONE OK
MSG_SORT_TIME OK
MSG_SORTING OK
MSG_SPEED OK
MSG_STACK_ERROR OK
MSG_STATISTICS OK
MSG_STATS_FILAMENTUSED OK
MSG_STATS_PRINTTIME OK
MSG_STATS_TOTALFILAMENT OK
MSG_STATS_TOTALPRINTTIME OK
MSG_STEPPER_TOO_HIGH OK
MSG_SUPPORT OK
MSG_TEMP_CAL_FAILED OK
MSG_TEMP_CAL_WARNING OK
MSG_TEMP_CALIBRATION_OFF OK
MSG_TEMP_CALIBRATION_ON OK
MSG_TEMPERATURE OK
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF OK
MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON OK
MSG_TUNE OK
MSG_UNLOAD_ALL OK
MSG_UNLOAD_FILAMENT_1 OK
MSG_UNLOAD_FILAMENT_2 OK
MSG_UNLOAD_FILAMENT_3 OK
MSG_UNLOAD_FILAMENT_4 OK
MSG_UNLOAD_SUCCESSFUL OK
MSG_USED OK
MSG_USERWAIT OK
MSG_V2_CALIBRATION OK
MSG_WAITING_TEMP OK
MSG_WAITING_TEMP_PINDA OK
MSG_WIZARD OK
MSG_WIZARD_CLEAN_HEATBED OK
MSG_WIZARD_FILAMENT_LOADED OK
MSG_WIZARD_INSERT_CORRECT_FILAMENT OK
MSG_WIZARD_LOAD_FILAMENT OK
MSG_WIZARD_PLA_FILAMENT OK
MSG_WIZARD_REPEAT_V2_CAL OK
MSG_WIZARD_RERUN OK
MSG_WIZARD_SELFTEST OK
MSG_WIZARD_V2_CAL OK
MSG_WIZARD_V2_CAL_2 OK
MSG_WIZARD_WELCOME OK
MSG_WIZARD_WILL_PREHEAT OK
MSG_WIZARD_XYZ_CAL OK
MSG_WIZARD_Z_CAL OK
MSG_XYZ_DETAILS OK
MSG_Y_DISTANCE_FROM_MIN OK

27
lang_upgrade/src/config.h Normal file
View file

@ -0,0 +1,27 @@
#ifndef _CONFIG_H
#define _CONFIG_H
//ADC configuration
#define ADC_CHAN_MSK 0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
#define ADC_CHAN_CNT 7 //number of used channels)
#define ADC_OVRSAMPL 16 //oversampling multiplier
#define ADC_CALLBACK adc_ready //callback function ()
//SM4 configuration
#define SM4_DEFDELAY 500 //default step delay [us]
//TMC2130 - Trinamic stepper driver
//pinout - hardcoded
//spi:
#define TMC2130_SPI_RATE 0 // fosc/4 = 4MHz
#define TMC2130_SPCR SPI_SPCR(TMC2130_SPI_RATE, 1, 1, 1, 0)
#define TMC2130_SPSR SPI_SPSR(TMC2130_SPI_RATE)
//LANG - Multi-language support
#define LANG_MODE 0 // primary language only
//#define LANG_MODE 1 // sec. language support
#define LANG_SIZE_RESERVED 0x3000 // reserved space for secondary language (12kb)
#endif //_CONFIG_H

63
lang_upgrade/src/language.c Normal file
View file

@ -0,0 +1,63 @@
//language.c
#include "language.h"
#include <inttypes.h>
#include <avr/pgmspace.h>
// Currectly active language selection.
unsigned char lang_selected = 0;
#if (LANG_MODE == 0) //primary language only
#else //(LANG_MODE == 0)
//reserved xx kbytes for secondary language table
static const char _SEC_LANG[LANG_SIZE_RESERVED] PROGMEM_I2 = "_SEC_LANG";
#endif //(LANG_MODE == 0)
//lang_table_t structure - 16byte header
typedef struct
{
struct
{
uint32_t magic;
uint16_t size;
uint16_t count;
uint16_t checksum;
uint16_t reserved0;
uint32_t reserved1;
} header;
uint16_t table[];
} lang_table_t;
//lang_table pointer
lang_table_t* lang_table = 0;
const char* lang_get_translation(const char* s)
{
if (lang_selected == 0) return s + 2; //primary language selected
if (lang_table == 0) return s + 2; //sec. lang table not found
uint16_t ui = pgm_read_word(((uint16_t*)s)); //read string id
if (ui == 0xffff) return s + 2; //translation not found
ui = pgm_read_word(((uint16_t*)(((char*)lang_table + 16 + ui*2)))); //read relative offset
return (const char*)((char*)lang_table + ui + 16); //return calculated pointer
}
const char* lang_select(unsigned char lang)
{
#if (LANG_MODE == 0) //primary language only
return 0;
#else //(LANG_MODE == 0)
if (lang == 0) //primary language
{
lang_table = 0;
lang_selected = 0;
return;
}
uint16_t ui = (uint16_t)&_SEC_LANG; //pointer to _SEC_LANG reserved space
ui += 0x0100; //add 1 page
ui &= 0xff00; //align to page
lang_table = ui; //set table pointer
ui = pgm_read_word(((uint16_t*)(((char*)lang_table + 16)))); //read relative offset of first string (language name)
return (const char*)((char*)lang_table + ui + 16); //return calculated pointer
#endif //(LANG_MODE == 0)
}

87
lang_upgrade/src/language.h Normal file
View file

@ -0,0 +1,87 @@
//language.h
#ifndef LANGUAGE_H
#define LANGUAGE_H
#include "config.h"
#define PROTOCOL_VERSION "1.0"
#ifdef CUSTOM_MENDEL_NAME
// #define CUSTOM_MENDEL_NAME CUSTOM_MENDEL_NAME
#else
#define MACHINE_NAME "Mendel"
#endif
#ifndef MACHINE_UUID
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
#endif
#define MSG_FW_VERSION "Firmware"
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
#if (LANG_MODE == 0)
//#define _i PSTR
//#define _I(s) (__extension__({static const char __c[] __attribute__((section("Txt_i"))) = s; &__c[0];}))
#endif //(LANG_MODE == 0)
//section progmem0 will be used for localized translated strings
#define PROGMEM_I2 __attribute__((section(".progmem0")))
//section progmem1 will be used for localized strings in english
#define PROGMEM_I1 __attribute__((section(".progmem1")))
//section progmem2 will be used for not localized strings in english
#define PROGMEM_N1 __attribute__((section(".progmem2")))
#if (LANG_MODE == 0) //primary language only
#define _I(s) (__extension__({static const char __c[] PROGMEM_I1 = s; &__c[0];}))
#define ISTR(s) s
#define _i(s) _I(s)
#define _T(s) s
#else //(LANG_MODE == 0)
#define _I(s) (__extension__({static const char __c[] PROGMEM_I1 = "\xff\xff"s; &__c[0];}))
#define ISTR(s) "\xff\xff"s
#define _i(s) lang_get_translation(_I(s))
#define _T(s) lang_get_translation(s)
#endif //(LANG_MODE == 0)
#define _N(s) (__extension__({static const char __c[] PROGMEM_N1 = s; &__c[0];}))
#define _n(s) _N(s)
// Language indices into their particular symbol tables.
#define LANG_ID_EN 0
#define LANG_ID_CZ 1
// Language is not defined and it shall be selected from the menu.
#define LANG_ID_FORCE_SELECTION 254
// Language is not defined on a virgin RAMBo board.
#define LANG_ID_UNDEFINED 255
// Default language ID, if no language is selected.
#define LANG_ID_DEFAULT LANG_ID_CZ
// Number of languages available in the language table.
#define LANG_NUM 2
#if defined(__cplusplus)
extern "C" {
#endif //defined(__cplusplus)
// Currectly active language selection.
extern unsigned char lang_selected;
extern const char* lang_get_translation(const char* s);
extern const char* lang_select(unsigned char lang);
#if defined(__cplusplus)
}
#endif //defined(__cplusplus)
#define CAT2(_s1, _s2) _s1
#define CAT4(_s1, _s2, _s3, _s4) _s1
#define MSG_LANGUAGE_NAME_EXPLICIT(i) ((i==0)?PSTR("ENG"):PSTR("CZE"))
#include "messages.h"
#endif //__LANGUAGE_H

9
lang_upgrade/src/messages.c Normal file
View file

@ -0,0 +1,9 @@
//messages.c
#include "language.h"
//this is because we need include Configuration_prusa.h (CUSTOM_MENDEL_NAME)
#define bool char
#define true 1
#define false 0
#include "Configuration_prusa.h"

6
lang_upgrade/src/messages.h Normal file
View file

@ -0,0 +1,6 @@
//messages.h
// Common serial messages
#define MSG_MARLIN "Marlin"
// LCD Menu Messages