PavelSindler
GitHub
commit
08bf448321
@ -273,7 +273,7 @@ void LiquidCrystal_Prusa::setCursor(uint8_t col, uint8_t row)
|
||||
if ( row >= _numlines ) {
|
||||
row = _numlines-1; // we count rows starting w/0
|
||||
}
|
||||
|
||||
_currline = row;
|
||||
command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
|
||||
}
|
||||
|
||||
@ -344,9 +344,8 @@ void LiquidCrystal_Prusa::noAutoscroll(void) {
|
||||
void LiquidCrystal_Prusa::createChar(uint8_t location, uint8_t charmap[]) {
|
||||
location &= 0x7; // we only have 8 locations 0-7
|
||||
command(LCD_SETCGRAMADDR | (location << 3));
|
||||
for (int i=0; i<8; i++) {
|
||||
write(charmap[i]);
|
||||
}
|
||||
for (int i=0; i<8; i++)
|
||||
send(charmap[i], HIGH);
|
||||
}
|
||||
|
||||
/*********** mid level commands, for sending data/cmds */
|
||||
@ -356,6 +355,12 @@ inline void LiquidCrystal_Prusa::command(uint8_t value) {
|
||||
}
|
||||
|
||||
inline size_t LiquidCrystal_Prusa::write(uint8_t value) {
|
||||
if (value == '\n')
|
||||
{
|
||||
if (_currline > 3) _currline = -1;
|
||||
setCursor(0, _currline + 1); // LF
|
||||
return 1;
|
||||
}
|
||||
if (_escape[0] || (value == 0x1b))
|
||||
return escape_write(value);
|
||||
send(value, HIGH);
|
||||
@ -421,7 +426,7 @@ inline size_t LiquidCrystal_Prusa::escape_write(uint8_t chr)
|
||||
break;
|
||||
case '2':
|
||||
if (chr == 'J') // escape = "\x1b[2J"
|
||||
{ clear(); break; } // EraseScreen
|
||||
{ clear(); _currline = 0; break; } // EraseScreen
|
||||
default:
|
||||
if (e_2_is_num && // escape = "\x1b[%1d"
|
||||
((chr == ';') || // escape = "\x1b[%1d;"
|
||||
|
||||
@ -371,7 +371,15 @@ float extruder_multiplier[EXTRUDERS] = {1.0
|
||||
#endif
|
||||
#endif
|
||||
};
|
||||
|
||||
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
|
||||
//shortcuts for more readable code
|
||||
#define _x current_position[X_AXIS]
|
||||
#define _y current_position[Y_AXIS]
|
||||
#define _z current_position[Z_AXIS]
|
||||
#define _e current_position[E_AXIS]
|
||||
|
||||
|
||||
float add_homing[3]={0,0,0};
|
||||
|
||||
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
|
||||
@ -440,6 +448,7 @@ bool cancel_heatup = false ;
|
||||
#define KEEPALIVE_STATE(n);
|
||||
#endif
|
||||
|
||||
|
||||
const char errormagic[] PROGMEM = "Error:";
|
||||
const char echomagic[] PROGMEM = "echo:";
|
||||
|
||||
@ -635,7 +644,6 @@ extern int8_t CrashDetectMenu;
|
||||
|
||||
void crashdet_enable()
|
||||
{
|
||||
// MYSERIAL.println("crashdet_enable");
|
||||
tmc2130_sg_stop_on_crash = true;
|
||||
eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF);
|
||||
CrashDetectMenu = 1;
|
||||
@ -644,7 +652,6 @@ void crashdet_enable()
|
||||
|
||||
void crashdet_disable()
|
||||
{
|
||||
// MYSERIAL.println("crashdet_disable");
|
||||
tmc2130_sg_stop_on_crash = false;
|
||||
tmc2130_sg_crash = 0;
|
||||
eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00);
|
||||
@ -896,14 +903,18 @@ int uart_putchar(char c, FILE *stream)
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
void lcd_splash()
|
||||
{
|
||||
// lcd_print_at_PGM(0, 1, PSTR(" Original Prusa "));
|
||||
// lcd_print_at_PGM(0, 2, PSTR(" 3D Printers "));
|
||||
// lcd.print_P(PSTR("\x1b[1;3HOriginal Prusa\x1b[2;4H3D Printers"));
|
||||
fputs_P(PSTR(ESC_2J ESC_H(1,1) "Original Prusa i3" ESC_H(3,2) "Prusa Research"), lcdout);
|
||||
// fputs_P(PSTR(ESC_2J ESC_H(1,1) "Original Prusa i3" ESC_H(3,2) "Prusa Research"), lcdout);
|
||||
lcd_puts_P(PSTR(ESC_2J ESC_H(1,1) "Original Prusa i3" ESC_H(3,2) "Prusa Research"));
|
||||
// lcd_printf_P(_N(ESC_2J "x:%.3f\ny:%.3f\nz:%.3f\ne:%.3f"), _x, _y, _z, _e);
|
||||
}
|
||||
|
||||
|
||||
void factory_reset()
|
||||
{
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
@ -1162,6 +1173,7 @@ void setup()
|
||||
SERIAL_ECHO_START;
|
||||
printf_P(PSTR(" " FW_VERSION_FULL "\n"));
|
||||
|
||||
|
||||
#ifdef DEBUG_SEC_LANG
|
||||
lang_table_header_t header;
|
||||
uint32_t src_addr = 0x00000;
|
||||
@ -1333,12 +1345,12 @@ void setup()
|
||||
if (crashdet && !farm_mode)
|
||||
{
|
||||
crashdet_enable();
|
||||
MYSERIAL.println("CrashDetect ENABLED!");
|
||||
puts_P(_N("CrashDetect ENABLED!"));
|
||||
}
|
||||
else
|
||||
{
|
||||
crashdet_disable();
|
||||
MYSERIAL.println("CrashDetect DISABLED");
|
||||
puts_P(_N("CrashDetect DISABLED"));
|
||||
}
|
||||
|
||||
#ifdef TMC2130_LINEARITY_CORRECTION
|
||||
@ -1406,7 +1418,6 @@ void setup()
|
||||
#ifdef TMC2130
|
||||
|
||||
if (1) {
|
||||
/// SERIAL_ECHOPGM("initial zsteps on power up: "); MYSERIAL.println(tmc2130_rd_MSCNT(Z_AXIS));
|
||||
// try to run to zero phase before powering the Z motor.
|
||||
// Move in negative direction
|
||||
WRITE(Z_DIR_PIN,INVERT_Z_DIR);
|
||||
@ -1418,7 +1429,6 @@ void setup()
|
||||
WRITE(Z_STEP_PIN, INVERT_Z_STEP_PIN);
|
||||
delay(2);
|
||||
}
|
||||
// SERIAL_ECHOPGM("initial zsteps after reset: "); MYSERIAL.println(tmc2130_rd_MSCNT(Z_AXIS));
|
||||
}
|
||||
#endif //TMC2130
|
||||
|
||||
@ -1688,21 +1698,17 @@ void setup()
|
||||
*/
|
||||
manage_heater(); // Update temperatures
|
||||
#ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
|
||||
MYSERIAL.println("Power panic detected!");
|
||||
MYSERIAL.print("Current bed temp:");
|
||||
MYSERIAL.println(degBed());
|
||||
MYSERIAL.print("Saved bed temp:");
|
||||
MYSERIAL.println((float)eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED));
|
||||
printf_P(_N("Power panic detected!\nCurrent bed temp:%d\nSaved bed temp:%d\n"), (int)degBed(), eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED))
|
||||
#endif
|
||||
if ( degBed() > ( (float)eeprom_read_byte((uint8_t*)EEPROM_UVLO_TARGET_BED) - AUTOMATIC_UVLO_BED_TEMP_OFFSET) ){
|
||||
#ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
|
||||
MYSERIAL.println("Automatic recovery!");
|
||||
puts_P(_N("Automatic recovery!"));
|
||||
#endif
|
||||
recover_print(1);
|
||||
}
|
||||
else{
|
||||
#ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
|
||||
MYSERIAL.println("Normal recovery!");
|
||||
puts_P(_N("Normal recovery!"));
|
||||
#endif
|
||||
if ( lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_RECOVER_PRINT), false) ) recover_print(0);
|
||||
else {
|
||||
@ -1726,7 +1732,7 @@ void setup()
|
||||
#ifdef PAT9125
|
||||
void fsensor_init() {
|
||||
int pat9125 = pat9125_init();
|
||||
printf_P(PSTR("PAT9125_init:%d\n"), pat9125);
|
||||
printf_P(_N("PAT9125_init:%d\n"), pat9125);
|
||||
uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
|
||||
filament_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
|
||||
if (!pat9125)
|
||||
@ -3110,7 +3116,8 @@ static void gcode_PRUSA_SN()
|
||||
{
|
||||
if (farm_mode) {
|
||||
selectedSerialPort = 0;
|
||||
MSerial.write(";S");
|
||||
putchar(';');
|
||||
putchar('S');
|
||||
int numbersRead = 0;
|
||||
ShortTimer timeout;
|
||||
timeout.start();
|
||||
@ -3119,14 +3126,14 @@ static void gcode_PRUSA_SN()
|
||||
while (MSerial.available() > 0) {
|
||||
uint8_t serial_char = MSerial.read();
|
||||
selectedSerialPort = 1;
|
||||
MSerial.write(serial_char);
|
||||
putchar(serial_char);
|
||||
numbersRead++;
|
||||
selectedSerialPort = 0;
|
||||
}
|
||||
if (timeout.expired(100u)) break;
|
||||
}
|
||||
selectedSerialPort = 1;
|
||||
MSerial.write('\n');
|
||||
putchar('\n');
|
||||
#if 0
|
||||
for (int b = 0; b < 3; b++) {
|
||||
tone(BEEPER, 110);
|
||||
@ -3136,7 +3143,7 @@ static void gcode_PRUSA_SN()
|
||||
}
|
||||
#endif
|
||||
} else {
|
||||
MYSERIAL.println("Not in farm mode.");
|
||||
puts_P(_N("Not in farm mode."));
|
||||
}
|
||||
}
|
||||
|
||||
@ -3217,22 +3224,16 @@ void process_commands()
|
||||
}
|
||||
}
|
||||
else if (code_seen("PRN")) {
|
||||
MYSERIAL.println(status_number);
|
||||
printf_P(_N("%d"), status_number);
|
||||
|
||||
}else if (code_seen("FAN")) {
|
||||
MYSERIAL.print("E0:");
|
||||
MYSERIAL.print(60*fan_speed[0]);
|
||||
MYSERIAL.println(" RPM");
|
||||
MYSERIAL.print("PRN0:");
|
||||
MYSERIAL.print(60*fan_speed[1]);
|
||||
MYSERIAL.println(" RPM");
|
||||
|
||||
printf_P(_N("E0:%d RPM\nPRN0:%d RPM\n"), 60*fan_speed[0], 60*fan_speed[1]);
|
||||
}else if (code_seen("fn")) {
|
||||
if (farm_mode) {
|
||||
MYSERIAL.println(farm_no);
|
||||
printf_P(_N("%d"), farm_no);
|
||||
}
|
||||
else {
|
||||
MYSERIAL.println("Not in farm mode.");
|
||||
puts_P(_N("Not in farm mode."));
|
||||
}
|
||||
|
||||
}
|
||||
@ -3736,14 +3737,9 @@ void process_commands()
|
||||
feedrate = homing_feedrate[Z_AXIS];
|
||||
|
||||
find_bed_induction_sensor_point_z(-10.f, 3);
|
||||
SERIAL_PROTOCOLRPGM(_T(MSG_BED));
|
||||
SERIAL_PROTOCOLPGM(" X: ");
|
||||
MYSERIAL.print(current_position[X_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM(" Y: ");
|
||||
MYSERIAL.print(current_position[Y_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM(" Z: ");
|
||||
MYSERIAL.print(current_position[Z_AXIS], 5);
|
||||
SERIAL_PROTOCOLPGM("\n");
|
||||
|
||||
printf_P(_N("%S X: %.5f Y: %.5f Z: %.5f\n"), _T(MSG_BED), _x, _y, _z);
|
||||
|
||||
clean_up_after_endstop_move();
|
||||
}
|
||||
break;
|
||||
@ -3751,11 +3747,8 @@ void process_commands()
|
||||
|
||||
case 75:
|
||||
{
|
||||
for (int i = 40; i <= 110; i++) {
|
||||
MYSERIAL.print(i);
|
||||
MYSERIAL.print(" ");
|
||||
MYSERIAL.println(temp_comp_interpolation(i));// / axis_steps_per_unit[Z_AXIS]);
|
||||
}
|
||||
for (int i = 40; i <= 110; i++)
|
||||
printf_P(_N("%d %.2f"), i, temp_comp_interpolation(i));
|
||||
}
|
||||
break;
|
||||
|
||||
@ -3818,8 +3811,7 @@ void process_commands()
|
||||
float start_temp = 5 * (int)(current_temperature_pinda / 5);
|
||||
if (start_temp < 35) start_temp = 35;
|
||||
if (start_temp < current_temperature_pinda) start_temp += 5;
|
||||
SERIAL_ECHOPGM("start temperature: ");
|
||||
MYSERIAL.println(start_temp);
|
||||
printf_P(_N("start temperature: %.1f\n"), start_temp);
|
||||
|
||||
// setTargetHotend(200, 0);
|
||||
setTargetBed(70 + (start_temp - 30));
|
||||
@ -3859,23 +3851,12 @@ void process_commands()
|
||||
}
|
||||
zero_z = current_position[Z_AXIS];
|
||||
|
||||
//current_position[Z_AXIS]
|
||||
SERIAL_ECHOLNPGM("");
|
||||
SERIAL_ECHOPGM("ZERO: ");
|
||||
MYSERIAL.print(current_position[Z_AXIS]);
|
||||
SERIAL_ECHOLNPGM("");
|
||||
printf_P(_N("\nZERO: %.3f\n"), current_position[Z_AXIS]);
|
||||
|
||||
int i = -1; for (; i < 5; i++)
|
||||
{
|
||||
float temp = (40 + i * 5);
|
||||
SERIAL_ECHOPGM("Step: ");
|
||||
MYSERIAL.print(i + 2);
|
||||
SERIAL_ECHOLNPGM("/6 (skipped)");
|
||||
SERIAL_ECHOPGM("PINDA temperature: ");
|
||||
MYSERIAL.print((40 + i*5));
|
||||
SERIAL_ECHOPGM(" Z shift (mm):");
|
||||
MYSERIAL.print(0);
|
||||
SERIAL_ECHOLNPGM("");
|
||||
printf_P(_N("\nStep: %d/6 (skipped)\nPINDA temperature: %d Z shift (mm):0\n"), i + 2, (40 + i*5));
|
||||
if (i >= 0) EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
|
||||
if (start_temp <= temp) break;
|
||||
}
|
||||
@ -3883,9 +3864,7 @@ void process_commands()
|
||||
for (i++; i < 5; i++)
|
||||
{
|
||||
float temp = (40 + i * 5);
|
||||
SERIAL_ECHOPGM("Step: ");
|
||||
MYSERIAL.print(i + 2);
|
||||
SERIAL_ECHOLNPGM("/6");
|
||||
printf_P(_N("\nStep: %d/6\n"), i + 2);
|
||||
custom_message_state = i + 2;
|
||||
setTargetBed(50 + 10 * (temp - 30) / 5);
|
||||
// setTargetHotend(255, 0);
|
||||
@ -3915,12 +3894,7 @@ void process_commands()
|
||||
}
|
||||
z_shift = (int)((current_position[Z_AXIS] - zero_z)*axis_steps_per_unit[Z_AXIS]);
|
||||
|
||||
SERIAL_ECHOLNPGM("");
|
||||
SERIAL_ECHOPGM("PINDA temperature: ");
|
||||
MYSERIAL.print(current_temperature_pinda);
|
||||
SERIAL_ECHOPGM(" Z shift (mm):");
|
||||
MYSERIAL.print(current_position[Z_AXIS] - zero_z);
|
||||
SERIAL_ECHOLNPGM("");
|
||||
printf_P(_N("\nPINDA temperature: %.1f Z shift (mm): %.3f"), current_temperature_pinda, current_position[Z_AXIS] - zero_z);
|
||||
|
||||
EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i * 2, &z_shift);
|
||||
|
||||
@ -3944,7 +3918,7 @@ void process_commands()
|
||||
enquecommand_front_P((PSTR("G28 W0")));
|
||||
break;
|
||||
}
|
||||
SERIAL_ECHOLNPGM("PINDA probe calibration start");
|
||||
puts_P(_N("PINDA probe calibration start"));
|
||||
custom_message = true;
|
||||
custom_message_type = 4;
|
||||
custom_message_state = 1;
|
||||
@ -3978,16 +3952,10 @@ void process_commands()
|
||||
find_bed_induction_sensor_point_z(-1.f);
|
||||
zero_z = current_position[Z_AXIS];
|
||||
|
||||
//current_position[Z_AXIS]
|
||||
SERIAL_ECHOLNPGM("");
|
||||
SERIAL_ECHOPGM("ZERO: ");
|
||||
MYSERIAL.print(current_position[Z_AXIS]);
|
||||
SERIAL_ECHOLNPGM("");
|
||||
printf_P(_N("\nZERO: %.3f\n"), current_position[Z_AXIS]);
|
||||
|
||||
for (int i = 0; i<5; i++) {
|
||||
SERIAL_ECHOPGM("Step: ");
|
||||
MYSERIAL.print(i+2);
|
||||
SERIAL_ECHOLNPGM("/6");
|
||||
printf_P(_N("\nStep: %d/6\n"), i + 2);
|
||||
custom_message_state = i + 2;
|
||||
t_c = 60 + i * 10;
|
||||
|
||||
@ -4014,12 +3982,7 @@ void process_commands()
|
||||
find_bed_induction_sensor_point_z(-1.f);
|
||||
z_shift = (int)((current_position[Z_AXIS] - zero_z)*axis_steps_per_unit[Z_AXIS]);
|
||||
|
||||
SERIAL_ECHOLNPGM("");
|
||||
SERIAL_ECHOPGM("Temperature: ");
|
||||
MYSERIAL.print(t_c);
|
||||
SERIAL_ECHOPGM(" Z shift (mm):");
|
||||
MYSERIAL.print(current_position[Z_AXIS] - zero_z);
|
||||
SERIAL_ECHOLNPGM("");
|
||||
printf_P(_N("\nTemperature: %d Z shift (mm): %.3f\n"), t_c, current_position[Z_AXIS] - zero_z);
|
||||
|
||||
EEPROM_save_B(EEPROM_PROBE_TEMP_SHIFT + i*2, &z_shift);
|
||||
|
||||
@ -4029,7 +3992,7 @@ void process_commands()
|
||||
custom_message = false;
|
||||
|
||||
eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1);
|
||||
SERIAL_ECHOLNPGM("Temperature calibration done. Continue with pressing the knob.");
|
||||
puts_P(_N("Temperature calibration done."));
|
||||
disable_x();
|
||||
disable_y();
|
||||
disable_z();
|
||||
@ -4087,7 +4050,7 @@ void process_commands()
|
||||
|
||||
}
|
||||
fan_speed[1];
|
||||
MYSERIAL.print(i); SERIAL_ECHOPGM(": "); MYSERIAL.println(fan_speed[1]);
|
||||
printf_P(_N("%d: %d\n"), i, fan_speed[1]);
|
||||
}
|
||||
}break;
|
||||
|
||||
@ -5143,15 +5106,11 @@ Sigma_Exit:
|
||||
if(code_seen('Q')) print_percent_done_silent = code_value();
|
||||
if(code_seen('S')) print_time_remaining_silent = code_value();
|
||||
|
||||
SERIAL_ECHOPGM("NORMAL MODE: Percent done: ");
|
||||
MYSERIAL.print(int(print_percent_done_normal));
|
||||
SERIAL_ECHOPGM("; print time remaining in mins: ");
|
||||
MYSERIAL.println(print_time_remaining_normal);
|
||||
SERIAL_ECHOPGM("SILENT MODE: Percent done: ");
|
||||
MYSERIAL.print(int(print_percent_done_silent));
|
||||
SERIAL_ECHOPGM("; print time remaining in mins: ");
|
||||
MYSERIAL.println(print_time_remaining_silent);
|
||||
|
||||
{
|
||||
const char* _msg_mode_done_remain = _N("%S MODE: Percent done: %d; print time remaining in mins: %d\n");
|
||||
printf_P(_msg_mode_done_remain, _N("NORMAL"), int(print_percent_done_normal), print_time_remaining_normal);
|
||||
printf_P(_msg_mode_done_remain, _N("SILENT"), int(print_percent_done_silent), print_time_remaining_silent);
|
||||
}
|
||||
break;
|
||||
|
||||
case 104: // M104
|
||||
@ -6819,14 +6778,8 @@ Sigma_Exit:
|
||||
if (code_seen('Y')) tmc2130_sg_thr[Y_AXIS] = code_value();
|
||||
if (code_seen('Z')) tmc2130_sg_thr[Z_AXIS] = code_value();
|
||||
if (code_seen('E')) tmc2130_sg_thr[E_AXIS] = code_value();
|
||||
MYSERIAL.print("tmc2130_sg_thr[X]=");
|
||||
MYSERIAL.println(tmc2130_sg_thr[X_AXIS], DEC);
|
||||
MYSERIAL.print("tmc2130_sg_thr[Y]=");
|
||||
MYSERIAL.println(tmc2130_sg_thr[Y_AXIS], DEC);
|
||||
MYSERIAL.print("tmc2130_sg_thr[Z]=");
|
||||
MYSERIAL.println(tmc2130_sg_thr[Z_AXIS], DEC);
|
||||
MYSERIAL.print("tmc2130_sg_thr[E]=");
|
||||
MYSERIAL.println(tmc2130_sg_thr[E_AXIS], DEC);
|
||||
for (uint8_t a = X_AXIS; a <= E_AXIS; a++)
|
||||
printf_P(_N("tmc2130_sg_thr[%c]=%d\n"), "XYZE"[a], tmc2130_sg_thr[a]);
|
||||
}
|
||||
break;
|
||||
|
||||
@ -7157,10 +7110,7 @@ void FlushSerialRequestResend()
|
||||
{
|
||||
//char cmdbuffer[bufindr][100]="Resend:";
|
||||
MYSERIAL.flush();
|
||||
SERIAL_PROTOCOLRPGM(_i("Resend: "));////MSG_RESEND c=0 r=0
|
||||
SERIAL_PROTOCOLLN(gcode_LastN + 1);
|
||||
previous_millis_cmd = millis();
|
||||
SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
|
||||
printf_P(_N("%S: %ld\n%S\n"), _i("Resend"), gcode_LastN + 1, _T(MSG_OK));
|
||||
}
|
||||
|
||||
// Confirm the execution of a command, if sent from a serial line.
|
||||
@ -7614,8 +7564,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
|
||||
|
||||
void kill(const char *full_screen_message, unsigned char id)
|
||||
{
|
||||
SERIAL_ECHOPGM("KILL: ");
|
||||
MYSERIAL.println(int(id));
|
||||
printf_P(_N("KILL: %d\n"), id);
|
||||
//return;
|
||||
cli(); // Stop interrupts
|
||||
disable_heater();
|
||||
@ -8176,9 +8125,7 @@ void temp_compensation_apply() {
|
||||
//interpolation
|
||||
z_shift_mm = temp_comp_interpolation(target_temperature_bed) / axis_steps_per_unit[Z_AXIS];
|
||||
}
|
||||
SERIAL_PROTOCOLPGM("\n");
|
||||
SERIAL_PROTOCOLPGM("Z shift applied:");
|
||||
MYSERIAL.print(z_shift_mm);
|
||||
printf_P(_N("\nZ shift applied:%.3f\n"), z_shift_mm);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] - z_shift_mm, current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
|
||||
st_synchronize();
|
||||
plan_set_z_position(current_position[Z_AXIS]);
|
||||
@ -8444,8 +8391,7 @@ void uvlo_()
|
||||
if(sd_print) eeprom_update_byte((uint8_t*)EEPROM_UVLO, 1);
|
||||
|
||||
st_synchronize();
|
||||
SERIAL_ECHOPGM("stps");
|
||||
MYSERIAL.println(tmc2130_rd_MSCNT(Z_AXIS));
|
||||
printf_P(_N("stps%d\n"), tmc2130_rd_MSCNT(Z_AXIS));
|
||||
|
||||
disable_z();
|
||||
|
||||
@ -8453,8 +8399,7 @@ void uvlo_()
|
||||
eeprom_update_byte((uint8_t*)EEPROM_POWER_COUNT, eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT) + 1);
|
||||
eeprom_update_word((uint16_t*)EEPROM_POWER_COUNT_TOT, eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT) + 1);
|
||||
|
||||
SERIAL_ECHOLNPGM("UVLO - end");
|
||||
MYSERIAL.println(millis() - time_start);
|
||||
printf_P(_N("UVLO - end %d\n"), millis() - time_start);
|
||||
|
||||
#if 0
|
||||
// Move the print head to the side of the print until all the power stored in the power supply capacitors is depleted.
|
||||
@ -8568,19 +8513,13 @@ void recover_print(uint8_t automatic) {
|
||||
/*while ((abs(degHotend(0)- target_temperature[0])>5) || (abs(degBed() -target_temperature_bed)>3)) { //wait for heater and bed to reach target temp
|
||||
delay_keep_alive(1000);
|
||||
}*/
|
||||
SERIAL_ECHOPGM("After waiting for temp:");
|
||||
SERIAL_ECHOPGM("Current position X_AXIS:");
|
||||
MYSERIAL.println(current_position[X_AXIS]);
|
||||
SERIAL_ECHOPGM("Current position Y_AXIS:");
|
||||
MYSERIAL.println(current_position[Y_AXIS]);
|
||||
|
||||
printf_P(_N("After waiting for temp:\nCurrent pos X_AXIS:%.3f\nCurrent pos Y_AXIS:%.3f\n"), current_position[X_AXIS], current_position[Y_AXIS]);
|
||||
|
||||
// Restart the print.
|
||||
restore_print_from_eeprom();
|
||||
|
||||
SERIAL_ECHOPGM("current_position[Z_AXIS]:");
|
||||
MYSERIAL.print(current_position[Z_AXIS]);
|
||||
SERIAL_ECHOPGM("current_position[E_AXIS]:");
|
||||
MYSERIAL.print(current_position[E_AXIS]);
|
||||
printf_P(_N("Current pos Z_AXIS:%.3f\nCurrent pos E_AXIS:%.3f\n"), current_position[Z_AXIS], current_position[E_AXIS]);
|
||||
}
|
||||
|
||||
void recover_machine_state_after_power_panic()
|
||||
@ -8942,24 +8881,12 @@ void restore_print_from_ram_and_continue(float e_move)
|
||||
|
||||
void print_world_coordinates()
|
||||
{
|
||||
SERIAL_ECHOPGM("world coordinates: (");
|
||||
MYSERIAL.print(current_position[X_AXIS], 3);
|
||||
SERIAL_ECHOPGM(", ");
|
||||
MYSERIAL.print(current_position[Y_AXIS], 3);
|
||||
SERIAL_ECHOPGM(", ");
|
||||
MYSERIAL.print(current_position[Z_AXIS], 3);
|
||||
SERIAL_ECHOLNPGM(")");
|
||||
printf_P(_N("world coordinates: (%.3f, %.3f, %.3f)\n"), current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS]);
|
||||
}
|
||||
|
||||
void print_physical_coordinates()
|
||||
{
|
||||
SERIAL_ECHOPGM("physical coordinates: (");
|
||||
MYSERIAL.print(st_get_position_mm(X_AXIS), 3);
|
||||
SERIAL_ECHOPGM(", ");
|
||||
MYSERIAL.print(st_get_position_mm(Y_AXIS), 3);
|
||||
SERIAL_ECHOPGM(", ");
|
||||
MYSERIAL.print(st_get_position_mm(Z_AXIS), 3);
|
||||
SERIAL_ECHOLNPGM(")");
|
||||
printf_P(_N("physical coordinates: (%.3f, %.3f, %.3f)\n"), st_get_position_mm[X_AXIS], st_get_position_mm[Y_AXIS], st_get_position_mm[Z_AXIS]);
|
||||
}
|
||||
|
||||
void print_mesh_bed_leveling_table()
|
||||
|
||||
@ -28,7 +28,7 @@
|
||||
|
||||
//LANG - Multi-language support
|
||||
//#define LANG_MODE 0 // primary language only
|
||||
#define LANG_MODE 0 // sec. language support
|
||||
#define LANG_MODE 1 // sec. language support
|
||||
#define LANG_SIZE_RESERVED 0x2700 // reserved space for secondary language (~10kb)
|
||||
//#define LANG_SIZE_RESERVED 0x1ef8 // reserved space for secondary language (~10kb)
|
||||
|
||||
|
||||
@ -26,7 +26,22 @@
|
||||
#include "tmc2130.h"
|
||||
#endif //TMC2130
|
||||
|
||||
#define _STRINGIFY(s) #s
|
||||
|
||||
#include <stdarg.h>
|
||||
|
||||
int lcd_puts_P(const char* str)
|
||||
{
|
||||
return fputs_P(str, lcdout);
|
||||
}
|
||||
|
||||
int lcd_printf_P(const char* format, ...)
|
||||
{
|
||||
va_list args;
|
||||
va_start(args, format);
|
||||
int ret = vfprintf_P(lcdout, format, args);
|
||||
va_end(args);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */
|
||||
@ -1486,72 +1501,50 @@ void lcd_cooldown()
|
||||
|
||||
static void lcd_menu_extruder_info()
|
||||
{
|
||||
//|01234567890123456789|
|
||||
//|Nozzle FAN: RPM|
|
||||
//|Print FAN: RPM|
|
||||
//|Fil. Xd: Yd: |
|
||||
//|Int: Shut: |
|
||||
//----------------------
|
||||
int fan_speed_RPM[2];
|
||||
|
||||
#ifdef PAT9125
|
||||
pat9125_update();
|
||||
#endif //PAT9125
|
||||
|
||||
// Display Nozzle fan RPM
|
||||
fan_speed_RPM[0] = 60*fan_speed[0];
|
||||
fan_speed_RPM[1] = 60*fan_speed[1];
|
||||
|
||||
// Display Nozzle fan RPM
|
||||
|
||||
lcd.setCursor(0, 0);
|
||||
lcd_printPGM(_i("Nozzle FAN:"));////MSG_INFO_NOZZLE_FAN c=11 r=1
|
||||
|
||||
lcd.setCursor(11, 0);
|
||||
lcd.print(" ");
|
||||
lcd.setCursor(12, 0);
|
||||
lcd.print(itostr4(fan_speed_RPM[0]));
|
||||
lcd.print(" RPM");
|
||||
|
||||
// Display Nozzle fan RPM
|
||||
|
||||
#if (defined(TACH_1))
|
||||
lcd.setCursor(0, 1);
|
||||
lcd_printPGM(_i("Print FAN: "));////MSG_INFO_PRINT_FAN c=11 r=1
|
||||
|
||||
lcd.setCursor(11, 1);
|
||||
lcd.print(" ");
|
||||
lcd.setCursor(12, 1);
|
||||
lcd.print(itostr4(fan_speed_RPM[1]));
|
||||
lcd.print(" RPM");
|
||||
#endif
|
||||
|
||||
#ifdef PAT9125
|
||||
// Display X and Y difference from Filament sensor
|
||||
lcd.setCursor(0, 2);
|
||||
lcd.print("Fil. Xd:");
|
||||
lcd.print(itostr3(pat9125_x));
|
||||
lcd.print(" ");
|
||||
lcd.setCursor(12, 2);
|
||||
lcd.print("Yd:");
|
||||
lcd.print(itostr3(pat9125_y));
|
||||
|
||||
// Display Light intensity from Filament sensor
|
||||
/* Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
|
||||
value ranges from 0(darkest) to 255(brightest). */
|
||||
lcd.setCursor(0, 3);
|
||||
|
||||
lcd.print("Int: ");
|
||||
lcd.setCursor(5, 3);
|
||||
lcd.print(itostr3(pat9125_b));
|
||||
|
||||
// Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
|
||||
// value ranges from 0(darkest) to 255(brightest).
|
||||
// Display LASER shutter time from Filament sensor
|
||||
/* Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
|
||||
auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
|
||||
When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to
|
||||
46. */
|
||||
|
||||
lcd.setCursor(10, 3);
|
||||
|
||||
lcd.print("Shut: ");
|
||||
lcd.setCursor(15, 3);
|
||||
lcd.print(itostr3(pat9125_s));
|
||||
// Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
|
||||
// auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
|
||||
// When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46.
|
||||
pat9125_update();
|
||||
lcd_printf_P(_N(
|
||||
ESC_H(0,0)
|
||||
"Nozzle FAN: %4d RPM\n"
|
||||
"Print FAN: %4d RPM\n"
|
||||
"Fil. Xd:%3d Yd:%3d\n"
|
||||
"Int: %3d Shut: %3d\n"
|
||||
),
|
||||
fan_speed_RPM[0],
|
||||
fan_speed_RPM[1],
|
||||
pat9125_x, pat9125_y,
|
||||
pat9125_b, pat9125_s
|
||||
);
|
||||
#else //PAT9125
|
||||
printf_P(_N(
|
||||
ESC_H(0,0)
|
||||
"Nozzle FAN: %4d RPM\n"
|
||||
"Print FAN: %4d RPM\n"
|
||||
),
|
||||
fan_speed_RPM[0],
|
||||
fan_speed_RPM[1]
|
||||
);
|
||||
#endif //PAT9125
|
||||
|
||||
|
||||
if (lcd_clicked())
|
||||
{
|
||||
menu_action_back();
|
||||
@ -1571,7 +1564,7 @@ static void lcd_menu_fails_stats_total()
|
||||
uint16_t filam = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
|
||||
uint16_t crashX = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT);
|
||||
uint16_t crashY = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT);
|
||||
fprintf_P(lcdout, PSTR(ESC_H(0,0) "Total failures" ESC_H(1,1) "Power failures %-3d" ESC_H(1,2) "Filam. runouts %-3d" ESC_H(1,3) "Crash X %-3d Y %-3d"), power, filam, crashX, crashY);
|
||||
lcd_printf_P(PSTR(ESC_H(0,0) "Total failures" ESC_H(1,1) "Power failures %-3d" ESC_H(1,2) "Filam. runouts %-3d" ESC_H(1,3) "Crash X %-3d Y %-3d"), power, filam, crashX, crashY);
|
||||
if (lcd_clicked())
|
||||
{
|
||||
lcd_quick_feedback();
|
||||
@ -1591,7 +1584,7 @@ static void lcd_menu_fails_stats_print()
|
||||
uint8_t filam = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
|
||||
uint8_t crashX = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X);
|
||||
uint8_t crashY = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y);
|
||||
fprintf_P(lcdout, PSTR(ESC_H(0,0) "Last print failures" ESC_H(1,1) "Power failures %-3d" ESC_H(1,2) "Filam. runouts %-3d" ESC_H(1,3) "Crash X %-3d Y %-3d"), power, filam, crashX, crashY);
|
||||
lcd_printf_P(PSTR(ESC_H(0,0) "Last print failures" ESC_H(1,1) "Power failures %-3d" ESC_H(1,2) "Filam. runouts %-3d" ESC_H(1,3) "Crash X %-3d Y %-3d"), power, filam, crashX, crashY);
|
||||
if (lcd_clicked())
|
||||
{
|
||||
lcd_quick_feedback();
|
||||
@ -1633,7 +1626,7 @@ static void lcd_menu_fails_stats()
|
||||
{
|
||||
uint8_t filamentLast = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT);
|
||||
uint16_t filamentTotal = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT);
|
||||
fprintf_P(lcdout, PSTR(ESC_H(0,0) "Last print failures" ESC_H(1,1) "Filam. runouts %-3d" ESC_H(0,2) "Total failures" ESC_H(1,3) "Filam. runouts %-3d"), filamentLast, filamentTotal);
|
||||
lcd_printf_P(PSTR(ESC_H(0,0) "Last print failures" ESC_H(1,1) "Filam. runouts %-3d" ESC_H(0,2) "Total failures" ESC_H(1,3) "Filam. runouts %-3d"), filamentLast, filamentTotal);
|
||||
if (lcd_clicked())
|
||||
{
|
||||
menu_action_back();
|
||||
@ -1652,7 +1645,7 @@ extern char* __malloc_heap_end;
|
||||
static void lcd_menu_debug()
|
||||
{
|
||||
#ifdef DEBUG_STACK_MONITOR
|
||||
fprintf_P(lcdout, PSTR(ESC_H(1,1) "RAM statistics" ESC_H(5,1) "SP_min: 0x%04x" ESC_H(1,2) "heap_start: 0x%04x" ESC_H(3,3) "heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end);
|
||||
lcd_printf_P(PSTR(ESC_H(1,1) "RAM statistics" ESC_H(5,1) "SP_min: 0x%04x" ESC_H(1,2) "heap_start: 0x%04x" ESC_H(3,3) "heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end);
|
||||
#endif //DEBUG_STACK_MONITOR
|
||||
|
||||
if (lcd_clicked())
|
||||
@ -1665,11 +1658,11 @@ static void lcd_menu_debug()
|
||||
|
||||
static void lcd_menu_temperatures()
|
||||
{
|
||||
fprintf_P(lcdout, PSTR(ESC_H(1,0) "Nozzle: %d%c" ESC_H(1,1) "Bed: %d%c"), (int)current_temperature[0], '\x01', (int)current_temperature_bed, '\x01');
|
||||
lcd_printf_P(PSTR(ESC_H(1,0) "Nozzle: %d%c" ESC_H(1,1) "Bed: %d%c"), (int)current_temperature[0], '\x01', (int)current_temperature_bed, '\x01');
|
||||
#ifdef AMBIENT_THERMISTOR
|
||||
fprintf_P(lcdout, PSTR(ESC_H(1,2) "Ambient: %d%c" ESC_H(1,3) "PINDA: %d%c"), (int)current_temperature_ambient, '\x01', (int)current_temperature_pinda, '\x01');
|
||||
lcd_printf_P(PSTR(ESC_H(1,2) "Ambient: %d%c" ESC_H(1,3) "PINDA: %d%c"), (int)current_temperature_ambient, '\x01', (int)current_temperature_pinda, '\x01');
|
||||
#else //AMBIENT_THERMISTOR
|
||||
fprintf_P(lcdout, PSTR(ESC_H(1,2) "PINDA: %d%c"), (int)current_temperature_pinda, '\x01');
|
||||
lcd_printf_P(PSTR(ESC_H(1,2) "PINDA: %d%c"), (int)current_temperature_pinda, '\x01');
|
||||
#endif //AMBIENT_THERMISTOR
|
||||
|
||||
if (lcd_clicked())
|
||||
@ -1687,8 +1680,8 @@ static void lcd_menu_voltages()
|
||||
{
|
||||
float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
|
||||
// float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC;
|
||||
// fprintf_P(lcdout, PSTR(ESC_H(1,1)"PWR: %d.%01dV" ESC_H(1,2)"BED: %d.%01dV"), (int)volt_pwr, (int)(10*fabs(volt_pwr - (int)volt_pwr)), (int)volt_bed, (int)(10*fabs(volt_bed - (int)volt_bed)));
|
||||
fprintf_P(lcdout, PSTR( ESC_H(1,1)"PWR: %d.%01dV"), (int)volt_pwr, (int)(10*fabs(volt_pwr - (int)volt_pwr))) ;
|
||||
// lcd_printf_P(PSTR(ESC_H(1,1)"PWR: %d.%01dV" ESC_H(1,2)"BED: %d.%01dV"), (int)volt_pwr, (int)(10*fabs(volt_pwr - (int)volt_pwr)), (int)volt_bed, (int)(10*fabs(volt_bed - (int)volt_bed)));
|
||||
lcd_printf_P(PSTR( ESC_H(1,1)"PWR: %d.%01dV"), (int)volt_pwr, (int)(10*fabs(volt_pwr - (int)volt_pwr))) ;
|
||||
if (lcd_clicked())
|
||||
{
|
||||
menu_action_back();
|
||||
@ -1699,7 +1692,7 @@ static void lcd_menu_voltages()
|
||||
#ifdef TMC2130
|
||||
static void lcd_menu_belt_status()
|
||||
{
|
||||
fprintf_P(lcdout, PSTR(ESC_H(1,0) "Belt status" ESC_H(2,1) "X %d" ESC_H(2,2) "Y %d" ), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
|
||||
lcd_printf_P(PSTR(ESC_H(1,0) "Belt status" ESC_H(2,1) "X %d" ESC_H(2,2) "Y %d" ), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)));
|
||||
if (lcd_clicked())
|
||||
{
|
||||
menu_action_back();
|
||||
@ -2091,37 +2084,32 @@ static void lcd_LoadFilament()
|
||||
|
||||
void lcd_menu_statistics()
|
||||
{
|
||||
|
||||
if (IS_SD_PRINTING)
|
||||
{
|
||||
int _met = total_filament_used / 100000;
|
||||
int _cm = (total_filament_used - (_met * 100000))/10;
|
||||
|
||||
int _cm = (total_filament_used - (_met * 100000)) / 10;
|
||||
int _t = (millis() - starttime) / 1000;
|
||||
int _h = _t / 3600;
|
||||
int _m = (_t - (_h * 3600)) / 60;
|
||||
int _s = _t - ((_h * 3600) + (_m * 60));
|
||||
|
||||
lcd.setCursor(0, 0);
|
||||
lcd_printPGM(_i("Filament used: "));////MSG_STATS_FILAMENTUSED c=20 r=0
|
||||
|
||||
lcd.setCursor(6, 1);
|
||||
lcd.print(itostr3(_met));
|
||||
lcd.print("m ");
|
||||
lcd.print(ftostr32ns(_cm));
|
||||
lcd.print("cm");
|
||||
|
||||
lcd.setCursor(0, 2);
|
||||
lcd_printPGM(_i("Print time: "));////MSG_STATS_PRINTTIME c=20 r=0
|
||||
|
||||
lcd.setCursor(8, 3);
|
||||
lcd.print(itostr2(_h));
|
||||
lcd.print("h ");
|
||||
lcd.print(itostr2(_m));
|
||||
lcd.print("m ");
|
||||
lcd.print(itostr2(_s));
|
||||
lcd.print("s");
|
||||
|
||||
//|01234567890123456789|
|
||||
//|Filament used: |
|
||||
//| 000m 00.000cm |
|
||||
//|Print time: |
|
||||
//| 00h 00m 00s |
|
||||
//----------------------
|
||||
lcd_printf_P(_N(
|
||||
ESC_2J
|
||||
"%S:"
|
||||
ESC_H(6,1) "%8.2f m\n"
|
||||
"%S :"
|
||||
ESC_H(8,3) "%2dh %02dm %02d"
|
||||
),
|
||||
_i("Filament used"),
|
||||
_met, _cm,
|
||||
_i("Print time"),
|
||||
_h, _m, _s
|
||||
);
|
||||
if (lcd_clicked())
|
||||
{
|
||||
lcd_quick_feedback();
|
||||
@ -2132,62 +2120,32 @@ void lcd_menu_statistics()
|
||||
{
|
||||
unsigned long _filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED);
|
||||
unsigned long _time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //in minutes
|
||||
|
||||
uint8_t _hours, _minutes;
|
||||
uint32_t _days;
|
||||
|
||||
float _filament_m = (float)_filament;
|
||||
int _filament_km = (_filament >= 100000) ? _filament / 100000 : 0;
|
||||
if (_filament_km > 0) _filament_m = _filament - (_filament_km * 100000);
|
||||
|
||||
float _filament_m = (float)_filament/100;
|
||||
// int _filament_km = (_filament >= 100000) ? _filament / 100000 : 0;
|
||||
// if (_filament_km > 0) _filament_m = _filament - (_filament_km * 100000);
|
||||
_days = _time / 1440;
|
||||
_hours = (_time - (_days * 1440)) / 60;
|
||||
_minutes = _time - ((_days * 1440) + (_hours * 60));
|
||||
|
||||
lcd_implementation_clear();
|
||||
|
||||
lcd.setCursor(0, 0);
|
||||
lcd_printPGM(_i("Total filament :"));////MSG_STATS_TOTALFILAMENT c=20 r=0
|
||||
lcd.setCursor(17 - strlen(ftostr32ns(_filament_m)), 1);
|
||||
lcd.print(ftostr32ns(_filament_m));
|
||||
|
||||
if (_filament_km > 0)
|
||||
{
|
||||
lcd.setCursor(17 - strlen(ftostr32ns(_filament_m)) - 3, 1);
|
||||
lcd.print("km");
|
||||
lcd.setCursor(17 - strlen(ftostr32ns(_filament_m)) - 8, 1);
|
||||
lcd.print(itostr4(_filament_km));
|
||||
}
|
||||
|
||||
|
||||
lcd.setCursor(18, 1);
|
||||
lcd.print("m");
|
||||
|
||||
lcd.setCursor(0, 2);
|
||||
lcd_printPGM(_i("Total print time :"));;////MSG_STATS_TOTALPRINTTIME c=20 r=0
|
||||
|
||||
lcd.setCursor(18, 3);
|
||||
lcd.print("m");
|
||||
lcd.setCursor(14, 3);
|
||||
lcd.print(itostr3(_minutes));
|
||||
|
||||
lcd.setCursor(14, 3);
|
||||
lcd.print(":");
|
||||
|
||||
lcd.setCursor(12, 3);
|
||||
lcd.print("h");
|
||||
lcd.setCursor(9, 3);
|
||||
lcd.print(itostr3(_hours));
|
||||
|
||||
lcd.setCursor(9, 3);
|
||||
lcd.print(":");
|
||||
|
||||
lcd.setCursor(7, 3);
|
||||
lcd.print("d");
|
||||
lcd.setCursor(4, 3);
|
||||
lcd.print(itostr3(_days));
|
||||
|
||||
|
||||
//|01234567890123456789|
|
||||
//|Total filament : |
|
||||
//| 000.00 m |
|
||||
//|Total print time : |
|
||||
//| 00d :00h :00 m |
|
||||
//----------------------
|
||||
lcd_printf_P(_N(
|
||||
ESC_2J
|
||||
"%S :"
|
||||
ESC_H(9,1) "%8.2f m\n"
|
||||
"%S :\n"
|
||||
"%7ldd :%2hhdh :%02hhd m"
|
||||
),
|
||||
_i("Total filament"),
|
||||
_filament_m,
|
||||
_i("Total print time"),
|
||||
_days, _hours, _minutes
|
||||
);
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
while (!lcd_clicked())
|
||||
{
|
||||
@ -2196,7 +2154,6 @@ void lcd_menu_statistics()
|
||||
delay(100);
|
||||
}
|
||||
KEEPALIVE_STATE(NOT_BUSY);
|
||||
|
||||
lcd_quick_feedback();
|
||||
menu_action_back();
|
||||
}
|
||||
@ -2266,21 +2223,31 @@ static void lcd_move_e()
|
||||
*/
|
||||
static void lcd_menu_xyz_y_min()
|
||||
{
|
||||
lcd.setCursor(0,0);
|
||||
lcd_printPGM(_i("Y distance from min:"));////MSG_Y_DISTANCE_FROM_MIN c=20 r=1
|
||||
lcd_print_at_PGM(0, 1, separator);
|
||||
lcd_print_at_PGM(0, 2, _i("Left:"));////MSG_LEFT c=12 r=1
|
||||
lcd_print_at_PGM(0, 3, _i("Right:"));////MSG_RIGHT c=12 r=1
|
||||
|
||||
//|01234567890123456789|
|
||||
//|Y distance from min:|
|
||||
//|--------------------|
|
||||
//|Left: N/A |
|
||||
//|Right: N/A |
|
||||
//----------------------
|
||||
float distanceMin[2];
|
||||
count_xyz_details(distanceMin);
|
||||
|
||||
for (int i = 0; i < 2; i++) {
|
||||
if(distanceMin[i] < 200) {
|
||||
lcd_print_at_PGM(11, i + 2, PSTR(""));
|
||||
lcd.print(distanceMin[i]);
|
||||
lcd_print_at_PGM((distanceMin[i] < 0) ? 17 : 16, i + 2, PSTR("mm"));
|
||||
} else lcd_print_at_PGM(11, i + 2, PSTR("N/A"));
|
||||
lcd_printf_P(_N(
|
||||
ESC_H(0,0)
|
||||
"%S:\n"
|
||||
"%S\n"
|
||||
"%S:\n"
|
||||
"%S:"
|
||||
),
|
||||
_i("Y distance from min"),
|
||||
separator,
|
||||
_i("Left"),
|
||||
_i("Right")
|
||||
);
|
||||
for (uint8_t i = 0; i < 2; i++)
|
||||
{
|
||||
lcd.setCursor(11,2+i);
|
||||
if (distanceMin[i] >= 200) lcd_puts_P(_N("N/A"));
|
||||
else lcd_printf_P(_N("%6.2fmm"), distanceMin[i]);
|
||||
}
|
||||
if (lcd_clicked())
|
||||
{
|
||||
@ -2290,28 +2257,33 @@ static void lcd_menu_xyz_y_min()
|
||||
/**
|
||||
* @brief Show measured axis skewness
|
||||
*/
|
||||
float _deg(float rad)
|
||||
{
|
||||
return rad * 180 / M_PI;
|
||||
}
|
||||
|
||||
static void lcd_menu_xyz_skew()
|
||||
{
|
||||
float angleDiff;
|
||||
angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
|
||||
|
||||
lcd.setCursor(0,0);
|
||||
lcd_printPGM(_i("Measured skew:"));////MSG_MEASURED_SKEW c=15 r=1
|
||||
if (angleDiff < 100) {
|
||||
lcd.setCursor(15, 0);
|
||||
lcd.print(angleDiff * 180 / M_PI);
|
||||
lcd.print(LCD_STR_DEGREE);
|
||||
}else lcd_print_at_PGM(16, 0, PSTR("N/A"));
|
||||
lcd_print_at_PGM(0, 1, separator);
|
||||
lcd_print_at_PGM(0, 2, _i("Slight skew:"));////MSG_SLIGHT_SKEW c=15 r=1
|
||||
lcd_print_at_PGM(15, 2, PSTR(""));
|
||||
lcd.print(bed_skew_angle_mild * 180 / M_PI);
|
||||
lcd.print(LCD_STR_DEGREE);
|
||||
lcd_print_at_PGM(0, 3, _i("Severe skew:"));////MSG_SEVERE_SKEW c=15 r=1
|
||||
lcd_print_at_PGM(15, 3, PSTR(""));
|
||||
lcd.print(bed_skew_angle_extreme * 180 / M_PI);
|
||||
lcd.print(LCD_STR_DEGREE);
|
||||
|
||||
//|01234567890123456789|
|
||||
//|Measured skew: N/A |
|
||||
//|--------------------|
|
||||
//|Slight skew: 0.12°|
|
||||
//|Severe skew: 0.25°|
|
||||
//----------------------
|
||||
float angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
|
||||
lcd_printf_P(_N(
|
||||
ESC_H(0,0)
|
||||
"%S: N/A\n"
|
||||
"%S\n"
|
||||
"%S: %5.2f\x01\n"
|
||||
"%S: %5.2f\x01"
|
||||
),
|
||||
_i("Measured skew"),
|
||||
separator,
|
||||
_i("Slight skew"), _deg(bed_skew_angle_mild),
|
||||
_i("Severe skew"), _deg(bed_skew_angle_extreme)
|
||||
);
|
||||
if (angleDiff < 100) lcd_printf_P(_N(ESC_H(15,0)"%4.2f\x01"), _deg(angleDiff));
|
||||
if (lcd_clicked())
|
||||
{
|
||||
lcd_goto_menu(lcd_menu_xyz_offset);
|
||||
@ -4058,8 +4030,7 @@ void lcd_wizard(int state) {
|
||||
}
|
||||
}
|
||||
|
||||
SERIAL_ECHOPGM("State: ");
|
||||
MYSERIAL.println(state);
|
||||
printf_P(_N("State: %d\n"), state);
|
||||
switch (state) { //final message
|
||||
case 0: //user dont want to use wizard
|
||||
msg = _T(MSG_WIZARD_QUIT);
|
||||
@ -5429,12 +5400,9 @@ void lcd_confirm_print()
|
||||
|
||||
}
|
||||
|
||||
static void lcd_test_menu()
|
||||
/*static void lcd_test_menu()
|
||||
{
|
||||
lang_boot_update_start(3);
|
||||
lcd_update_enable(true);
|
||||
lcd_return_to_status();
|
||||
}
|
||||
}*/
|
||||
|
||||
static void lcd_main_menu()
|
||||
{
|
||||
@ -5605,7 +5573,7 @@ static void lcd_main_menu()
|
||||
#endif
|
||||
|
||||
MENU_ITEM(submenu, _i("Support"), lcd_support_menu);////MSG_SUPPORT c=0 r=0
|
||||
MENU_ITEM(submenu, _i("Test"), lcd_test_menu);////MSG_SUPPORT c=0 r=0
|
||||
// MENU_ITEM(submenu, _i("Test"), lcd_test_menu);////MSG_SUPPORT c=0 r=0
|
||||
|
||||
END_MENU();
|
||||
|
||||
@ -6373,8 +6341,7 @@ static bool lcd_selfcheck_axis_sg(char axis) {
|
||||
//end of second measurement, now check for possible errors:
|
||||
|
||||
for(int i = 0; i < 2; i++){ //check if measured axis length corresponds to expected length
|
||||
SERIAL_ECHOPGM("Measured axis length:");
|
||||
MYSERIAL.println(measured_axis_length[i]);
|
||||
printf_P(_N("Measured axis length:%.3f\n"), measured_axis_length[i]);
|
||||
if (abs(measured_axis_length[i] - axis_length) > max_error_mm) {
|
||||
enable_endstops(false);
|
||||
|
||||
@ -6393,8 +6360,7 @@ static bool lcd_selfcheck_axis_sg(char axis) {
|
||||
}
|
||||
}
|
||||
|
||||
SERIAL_ECHOPGM("Axis length difference:");
|
||||
MYSERIAL.println(abs(measured_axis_length[0] - measured_axis_length[1]));
|
||||
printf_P(_N("Axis length difference:%.3f\n"), abs(measured_axis_length[0] - measured_axis_length[1]));
|
||||
|
||||
if (abs(measured_axis_length[0] - measured_axis_length[1]) > 1) { //check if difference between first and second measurement is low
|
||||
//loose pulleys
|
||||
|
||||
@ -4,6 +4,9 @@
|
||||
#include "Marlin.h"
|
||||
#include "mesh_bed_calibration.h"
|
||||
|
||||
extern int lcd_puts_P(const char* str);
|
||||
extern int lcd_printf_P(const char* format, ...);
|
||||
|
||||
#ifdef ULTRA_LCD
|
||||
|
||||
static void lcd_language_menu();
|
||||
|
||||
Loading…
Reference in New Issue
Block a user