3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S

Browse source
This commit is contained in:
Harpalyke 2019-03-19 20:28:31 +00:00
parent cb1b070a58
commit 0f21ccee3c
5 changed files with 31 additions and 15 deletions

24
Firmware/ConfigurationStore.cpp
View file

@ -11,6 +11,11 @@
#include "mesh_bed_leveling.h"
#endif
#ifdef TMC2130
#include "tmc2130.h"
#endif
M500_conf cs;
//! @brief Write data to EEPROM
@ -86,6 +91,7 @@ void Config_PrintSettings(uint8_t level)
#ifdef TMC2130
printf_P(PSTR(
"%SSteps per unit:\n%S M92 X%.2f Y%.2f Z%.2f E%.2f\n"
"%SUStep resolution: \n%S M350 X%d Y%d Z%d E%d\n"
"%SMaximum feedrates - normal (mm/s):\n%S M203 X%.2f Y%.2f Z%.2f E%.2f\n"
"%SMaximum feedrates - stealth (mm/s):\n%S M203 X%.2f Y%.2f Z%.2f E%.2f\n"
"%SMaximum acceleration - normal (mm/s2):\n%S M201 X%lu Y%lu Z%lu E%lu\n"
@ -95,6 +101,7 @@ void Config_PrintSettings(uint8_t level)
"%SHome offset (mm):\n%S M206 X%.2f Y%.2f Z%.2f\n"
),
echomagic, echomagic, cs.axis_steps_per_unit[X_AXIS], cs.axis_steps_per_unit[Y_AXIS], cs.axis_steps_per_unit[Z_AXIS], cs.axis_steps_per_unit[E_AXIS],
echomagic, echomagic, cs.axis_ustep_resolution[X_AXIS], cs.axis_ustep_resolution[Y_AXIS], cs.axis_ustep_resolution[Z_AXIS], cs.axis_ustep_resolution[E_AXIS],
echomagic, echomagic, cs.max_feedrate_normal[X_AXIS], cs.max_feedrate_normal[Y_AXIS], cs.max_feedrate_normal[Z_AXIS], cs.max_feedrate_normal[E_AXIS],
echomagic, echomagic, cs.max_feedrate_silent[X_AXIS], cs.max_feedrate_silent[Y_AXIS], cs.max_feedrate_silent[Z_AXIS], cs.max_feedrate_silent[E_AXIS],
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_normal[X_AXIS], cs.max_acceleration_units_per_sq_second_normal[Y_AXIS], cs.max_acceleration_units_per_sq_second_normal[Z_AXIS], cs.max_acceleration_units_per_sq_second_normal[E_AXIS],
@ -177,7 +184,7 @@ static_assert (false, "zprobe_zoffset was not initialized in printers in field t
"0.0, if this is not acceptable, increment EEPROM_VERSION to force use default_conf");
#endif
static_assert (sizeof(M500_conf) == 188, "sizeof(M500_conf) has changed, ensure that EEPROM_VERSION has been incremented, "
static_assert (sizeof(M500_conf) == 192, "sizeof(M500_conf) has changed, ensure that EEPROM_VERSION has been incremented, "
"or if you added members in the end of struct, ensure that historically uninitialized values will be initialized."
"If this is caused by change to more then 8bit processor, decide whether make this struct packed to save EEPROM,"
"leave as it is to keep fast code, or reorder struct members to pack more tightly.");
@ -220,6 +227,11 @@ static const M500_conf default_conf PROGMEM =
},
DEFAULT_MAX_FEEDRATE_SILENT,
DEFAULT_MAX_ACCELERATION_SILENT,
#ifdef TMC2130
{ TMC2130_USTEPS_XY, TMC2130_USTEPS_XY, TMC2130_USTEPS_Z, TMC2130_USTEPS_E },
#else // TMC2130
{16,16,16,16},
#endif
};
//! @brief Read M500 configuration
@ -269,6 +281,16 @@ bool Config_RetrieveSettings()
if (cs.max_acceleration_units_per_sq_second_silent[j] > SILENT_MAX_ACCEL_XY)
cs.max_acceleration_units_per_sq_second_silent[j] = SILENT_MAX_ACCEL_XY;
}
if(cs.axis_ustep_resolution[X_AXIS] == 0xff){ cs.axis_ustep_resolution[X_AXIS] = TMC2130_USTEPS_XY; }
if(cs.axis_ustep_resolution[Y_AXIS] == 0xff){ cs.axis_ustep_resolution[Y_AXIS] = TMC2130_USTEPS_XY; }
if(cs.axis_ustep_resolution[Z_AXIS] == 0xff){ cs.axis_ustep_resolution[Z_AXIS] = TMC2130_USTEPS_Z; }
if(cs.axis_ustep_resolution[E_AXIS] == 0xff){ cs.axis_ustep_resolution[E_AXIS] = TMC2130_USTEPS_E; }
tmc2130_set_res(X_AXIS, cs.axis_ustep_resolution[X_AXIS]);
tmc2130_set_res(Y_AXIS, cs.axis_ustep_resolution[Y_AXIS]);
tmc2130_set_res(Z_AXIS, cs.axis_ustep_resolution[Z_AXIS]);
tmc2130_set_res(E_AXIS, cs.axis_ustep_resolution[E_AXIS]);
#endif //TMC2130
reset_acceleration_rates();