3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Use cs.mintravelfeedrate from ConfigurationStore.

Browse source
This commit is contained in:
Marek Bel 2018-09-24 16:01:58 +02:00
parent 26e2fd1c76
commit 10428b30d9
4 changed files with 4 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Firmware/ConfigurationStore.cpp
View file

@ -103,7 +103,7 @@ void Config_PrintSettings(uint8_t level)
echomagic, echomagic, cs.max_acceleration_units_per_sq_second_normal[X_AXIS], cs.max_acceleration_units_per_sq_second_normal[Y_AXIS], cs.max_acceleration_units_per_sq_second_normal[Z_AXIS], cs.max_acceleration_units_per_sq_second_normal[E_AXIS],
echomagic, echomagic, max_acceleration_units_per_sq_second_silent[X_AXIS], max_acceleration_units_per_sq_second_silent[Y_AXIS], max_acceleration_units_per_sq_second_silent[Z_AXIS], max_acceleration_units_per_sq_second_silent[E_AXIS],
echomagic, echomagic, cs.acceleration, cs.retract_acceleration,
echomagic, echomagic, cs.minimumfeedrate, mintravelfeedrate, minsegmenttime, max_jerk[X_AXIS], max_jerk[Y_AXIS], max_jerk[Z_AXIS], max_jerk[E_AXIS],
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, minsegmenttime, max_jerk[X_AXIS], max_jerk[Y_AXIS], max_jerk[Z_AXIS], max_jerk[E_AXIS],
echomagic, echomagic, add_homing[X_AXIS], add_homing[Y_AXIS], add_homing[Z_AXIS]
#else //TMC2130
printf_P(PSTR(
@ -118,7 +118,7 @@ void Config_PrintSettings(uint8_t level)
echomagic, echomagic, max_feedrate[X_AXIS], max_feedrate[Y_AXIS], max_feedrate[Z_AXIS], max_feedrate[E_AXIS],
echomagic, echomagic, max_acceleration_units_per_sq_second[X_AXIS], max_acceleration_units_per_sq_second[Y_AXIS], max_acceleration_units_per_sq_second[Z_AXIS], max_acceleration_units_per_sq_second[E_AXIS],
echomagic, echomagic, cs.acceleration, cs.retract_acceleration,
echomagic, echomagic, cs.minimumfeedrate, mintravelfeedrate, minsegmenttime, max_jerk[X_AXIS], max_jerk[Y_AXIS], max_jerk[Z_AXIS], max_jerk[E_AXIS],
echomagic, echomagic, cs.minimumfeedrate, cs.mintravelfeedrate, minsegmenttime, max_jerk[X_AXIS], max_jerk[Y_AXIS], max_jerk[Z_AXIS], max_jerk[E_AXIS],
echomagic, echomagic, add_homing[X_AXIS], add_homing[Y_AXIS], add_homing[Z_AXIS]
#endif //TMC2130
);

2
Firmware/Marlin_main.cpp
View file

@ -5962,7 +5962,7 @@ Sigma_Exit:
case 205: //M205 advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk
{
if(code_seen('S')) cs.minimumfeedrate = code_value();
if(code_seen('T')) mintravelfeedrate = code_value();
if(code_seen('T')) cs.mintravelfeedrate = code_value();
if(code_seen('B')) minsegmenttime = code_value() ;
if(code_seen('X')) max_jerk[X_AXIS] = max_jerk[Y_AXIS] = code_value();
if(code_seen('Y')) max_jerk[Y_AXIS] = code_value();

3
Firmware/planner.cpp
View file

@ -85,7 +85,6 @@ unsigned long* max_acceleration_units_per_sq_second = cs.max_acceleration_units_
// Jerk is a maximum immediate velocity change.
float max_jerk[NUM_AXIS];
float mintravelfeedrate;
unsigned long axis_steps_per_sqr_second[NUM_AXIS];
#ifdef ENABLE_AUTO_BED_LEVELING
@ -909,7 +908,7 @@ block->steps_y.wide = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-p
if (block->steps_e.wide == 0)
{
if(feed_rate<mintravelfeedrate) feed_rate=mintravelfeedrate;
if(feed_rate<cs.mintravelfeedrate) feed_rate=cs.mintravelfeedrate;
}
else
{

1
Firmware/planner.h
View file

@ -171,7 +171,6 @@ extern unsigned long* max_acceleration_units_per_sq_second;
// Jerk is a maximum immediate velocity change.
extern float max_jerk[NUM_AXIS];
extern float mintravelfeedrate;
extern unsigned long axis_steps_per_sqr_second[NUM_AXIS];
extern long position[NUM_AXIS];