FSensor - code cleaning + simplification

+ removed DEBUG_DISABLE_FSENSORCHECK
+ added FILAMENT_SENSOR

Firmware/Marlin_main.cpp

@@ -638,7 +638,6 @@ void stop_and_save_print_to_ram(float z_move, float e_move);
 void restore_print_from_ram_and_continue(float e_move);
 
 bool fans_check_enabled = true;
-bool fsensor_autoload_enabled = true;
 
 
 #ifdef TMC2130
@@ -1187,8 +1186,7 @@ void setup()
 		tmc2130_current_r[E_AXIS] = 36;
 #endif //TMC2130
 		//disabled filament autoload (PFW360)
-		fsensor_autoload_enabled = false;
+		fsensor_autoload_set(false);
-		eeprom_update_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED, 0);
 	}
 	MYSERIAL.begin(BAUDRATE);
 	fdev_setup_stream(uartout, uart_putchar, NULL, _FDEV_SETUP_WRITE); //setup uart out stream
@@ -1625,9 +1623,7 @@ void setup()
 #endif //DEBUG_DISABLE_FANCHECK
 
 #ifdef PAT9125
-#ifndef DEBUG_DISABLE_FSENSORCHECK
 	fsensor_setup_interrupt();
-#endif //DEBUG_DISABLE_FSENSORCHECK
 #endif //PAT9125
 	for (int i = 0; i<4; i++) EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]); 
 	
@@ -3084,7 +3080,6 @@ void gcode_M701()
 	custom_message = true;
 	custom_message_type = 2;
 
-	bool old_watch_runout = fsensor_watch_runout;
 	fsensor_oq_meassure_start();
 
 	lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
@@ -3129,12 +3124,7 @@ void gcode_M701()
 
 	fsensor_oq_meassure_stop();
 
-	fsensor_err_cnt = 0;
-	fsensor_watch_runout = old_watch_runout;
 
-	printf_P(_N("\nFSENSOR st_sum=%lu yd_sum=%lu er_sum=%u er_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
-	printf_P(_N("\nFSENSOR yd_min=%hhu yd_max=%hhu yd_avg=%hhu\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, fsensor_oq_yd_sum * FSENSOR_CHUNK_LEN / fsensor_oq_st_sum);
-	printf_P(PSTR("gcode_M701 end\n"));
 
 
 	if (!fsensor_oq_result())
@@ -7501,13 +7491,10 @@ static void handleSafetyTimer()
 void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument set in Marlin.h
 {
 #ifdef PAT9125
-	if (fsensor_enabled && fsensor_autoload_enabled && fsensor_watch_runout && !moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LCD_COMMAND_V2_CAL))
+	if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LCD_COMMAND_V2_CAL))
-	{
-		if (fsensor_watch_autoload)
 	{
 		if (fsensor_check_autoload())
 		{
-                
             if (degHotend0() > EXTRUDE_MINTEMP)
             {
                 fsensor_autoload_check_stop();
@@ -7529,14 +7516,9 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
                 lcd_clear();
                 lcd_update_enable(true);
             }
-                
 		}
 	}
 	else
-			fsensor_autoload_check_start();
-	}
-	else
-		if (fsensor_watch_autoload)
 		fsensor_autoload_check_stop();
 #endif //PAT9125
 
@@ -9128,14 +9110,14 @@ void M600_load_filament(bool fsensor_enabled) {
 		KEEPALIVE_STATE(PAUSED_FOR_USER);
 
 #ifdef PAT9125
-		if (fsensor_watch_autoload && (fsensor_enabled || fsensor_watch_runout)) fsensor_autoload_check_start();
+		fsensor_autoload_check_start();
 #endif //PAT9125
         while(!lcd_clicked())
 		{
           manage_heater();
           manage_inactivity(true);
 #ifdef PAT9125
-		  if (fsensor_watch_autoload && (fsensor_enabled || fsensor_watch_runout) && fsensor_check_autoload())
+		  if (fsensor_check_autoload())
 		  {
 			tone(BEEPER, 1000);
 			delay_keep_alive(50);
@@ -9146,7 +9128,7 @@ void M600_load_filament(bool fsensor_enabled) {
 
         }
 #ifdef PAT9125
-		if (fsensor_watch_autoload && (fsensor_enabled || fsensor_watch_runout)) fsensor_autoload_check_stop();
+		fsensor_autoload_check_stop();
 #endif //PAT9125
 		KEEPALIVE_STATE(IN_HANDLER);
 

Firmware/fsensor.cpp

@@ -19,37 +19,6 @@ extern void stop_and_save_print_to_ram(float z_move, float e_move);
 extern void restore_print_from_ram_and_continue(float e_move);
 extern int8_t FSensorStateMenu;
 
-void fsensor_init(void)
-{
-	int pat9125 = pat9125_init();
-	printf_P(_N("PAT9125_init:%d\n"), pat9125);
-	uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
-     fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
-	if (!pat9125)
-	{
-		fsensor = 0; //disable sensor
-		fsensor_not_responding = true;
-	}
-	else {
-		fsensor_not_responding = false;
-	}
-	puts_P(PSTR("FSensor "));
-	if (fsensor)
-	{
-		puts_P(PSTR("ENABLED\n"));
-		fsensor_enable();
-	}
-	else
-	{
-		puts_P(PSTR("DISABLED\n"));
-		fsensor_disable();
-	}
-#ifdef DEBUG_DISABLE_FSENSORCHECK
-	fsensor_autoload_enabled = false;
-	fsensor_disable();
-#endif //DEBUG_DISABLE_FSENSORCHECK
-}
-
 void fsensor_stop_and_save_print(void)
 {
 	stop_and_save_print_to_ram(0, 0); //XYZE - no change	
@@ -64,38 +33,91 @@ void fsensor_restore_print_and_continue(void)
 uint8_t fsensor_int_pin_old = 0;
 int16_t fsensor_chunk_len = FSENSOR_CHUNK_LEN;
 
+//enabled = initialized and sampled every chunk event
 bool fsensor_enabled = true;
+//runout watching is done in fsensor_update (called from main loop)
 bool fsensor_watch_runout = true;
+//not responding - is set if any communication error occured durring initialization or readout
 bool fsensor_not_responding = false;
 
+//number of errors, updated in ISR
 uint8_t fsensor_err_cnt = 0;
+//variable for accumolating step count
 int16_t fsensor_st_cnt = 0;
 
-
+//log flag: 0=log disabled, 1=log enabled
 uint8_t fsensor_log = 1;
 
-//autoload enable/disable flag
+////////////////////////////////////////////////////////////////////////////////
+//filament autoload variables
+
+//autoload feature enabled
+bool fsensor_autoload_enabled = true;
+
+//autoload watching enable/disable flag
 bool fsensor_watch_autoload = false;
+//
 uint16_t fsensor_autoload_y = 0;
+//
 uint8_t fsensor_autoload_c = 0;
+//
 uint32_t fsensor_autoload_last_millis = 0;
+//
 uint8_t fsensor_autoload_sum = 0;
 
-//filament optical quality meassurement
+////////////////////////////////////////////////////////////////////////////////
+//filament optical quality meassurement variables
+
+//meassurement enable/disable flag
 bool fsensor_oq_meassure = false;
+//skip-chunk counter, for accurate meassurement is necesary to skip first chunk...
 uint8_t  fsensor_oq_skipchunk;
-uint32_t fsensor_oq_st_sum;
+//sum of steps in positive direction movements
-uint32_t fsensor_oq_yd_sum;
+uint16_t fsensor_oq_st_sum;
+//sum of deltas in positive direction movements
+uint16_t fsensor_oq_yd_sum;
+//sum of errors durring meassurement
 uint16_t fsensor_oq_er_sum;
+//max error counter value durring meassurement
 uint8_t  fsensor_oq_er_max;
+//minimum delta value
 uint16_t fsensor_oq_yd_min;
+//maximum delta value
 uint16_t fsensor_oq_yd_max;
 
 
-bool fsensor_enable(void)
+void fsensor_init(void)
 {
 	int pat9125 = pat9125_init();
-    printf_P(PSTR("PAT9125_init:%d\n"), pat9125);
+	printf_P(_N("PAT9125_init:%d\n"), pat9125);
+	uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
+	fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
+	if (!pat9125)
+	{
+		fsensor = 0; //disable sensor
+		fsensor_not_responding = true;
+	}
+	else
+	{
+		fsensor_not_responding = false;
+	}
+	puts_P(PSTR("FSensor "));
+	if (fsensor)
+	{
+		fsensor_enable();
+		puts_P(PSTR("ENABLED\n"));
+	}
+	else
+	{
+		fsensor_disable();
+		puts_P(PSTR("DISABLED\n"));
+	}
+}
+
+bool fsensor_enable(void)
+{
+	uint8_t pat9125 = pat9125_init();
+    printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
 	if (pat9125)
 		fsensor_not_responding = false;
 	else
@@ -113,7 +135,6 @@ bool fsensor_enable(void)
 
 void fsensor_disable(void)
 {
-//	puts_P(PSTR("fsensor_disable\n"));
 	fsensor_enabled = false;
 	eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00); 
 	FSensorStateMenu = 0;
@@ -134,41 +155,54 @@ void pciSetup(byte pin)
 
 void fsensor_autoload_check_start(void)
 {
-//	puts_P(PSTR("fsensor_autoload_check_start\n"));
+	if (!fsensor_enabled) return;
+	if (!fsensor_autoload_enabled) return;
+	if (fsensor_watch_autoload) return;
 	if (!pat9125_update_y()) //update sensor
 	{
-		printf_P(ERRMSG_PAT9125_NOT_RESP, 3);
 		fsensor_disable();
 		fsensor_not_responding = true;
 		fsensor_watch_autoload = false;
+		printf_P(ERRMSG_PAT9125_NOT_RESP, 3);
 		return;
 	}
 	fsensor_autoload_y = pat9125_y; //save current y value
 	fsensor_autoload_c = 0; //reset number of changes counter
 	fsensor_autoload_sum = 0;
 	fsensor_autoload_last_millis = millis();
+	fsensor_watch_runout = false;
 	fsensor_watch_autoload = true;
 	fsensor_err_cnt = 0;
 }
 
 void fsensor_autoload_check_stop(void)
 {
-//	puts_P(PSTR("fsensor_autoload_check_stop\n"));
+	if (!fsensor_enabled) return;
+	if (!fsensor_autoload_enabled) return;
+	if (!fsensor_watch_autoload) return;
 	fsensor_autoload_sum = 0;
 	fsensor_watch_autoload = false;
+	fsensor_watch_runout = true;
 	fsensor_err_cnt = 0;
 }
 
 bool fsensor_check_autoload(void)
 {
+	if (!fsensor_enabled) return false;
+	if (!fsensor_autoload_enabled) return false;
+	if (!fsensor_watch_autoload)
+	{
+		fsensor_autoload_check_start();
+		return false;
+	}
 	uint8_t fsensor_autoload_c_old = fsensor_autoload_c;
 	if ((millis() - fsensor_autoload_last_millis) < 25) return false;
 	fsensor_autoload_last_millis = millis();
 	if (!pat9125_update_y())
 	{
-		printf_P(ERRMSG_PAT9125_NOT_RESP, 2);
 		fsensor_disable();
 		fsensor_not_responding = true;
+		printf_P(ERRMSG_PAT9125_NOT_RESP, 2);
 		return false; //update sensor
 	}
 	int16_t dy = fsensor_autoload_y - pat9125_y;
@@ -210,7 +244,12 @@ void fsensor_oq_meassure_start(void)
 
 void fsensor_oq_meassure_stop(void)
 {
+	printf_P(PSTR("fsensor_oq_meassure_stop\n"));
+	printf_P(_N(" st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
+	printf_P(_N(" yd_min=%u yd_max=%u yd_avg=%u\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, fsensor_oq_yd_sum * FSENSOR_CHUNK_LEN / fsensor_oq_st_sum);
 	fsensor_oq_meassure = false;
+	fsensor_err_cnt = 0;
+	fsensor_watch_runout = true;
 }
 
 bool fsensor_oq_result(void)
@@ -241,9 +280,9 @@ ISR(PCINT2_vect)
 	uint8_t old_err_cnt = fsensor_err_cnt;
 	if (!pat9125_update_y())
 	{
-		printf_P(ERRMSG_PAT9125_NOT_RESP, 1);
 		fsensor_disable();
 		fsensor_not_responding = true;
+		printf_P(ERRMSG_PAT9125_NOT_RESP, 1);
 	}
 	if (st_cnt != 0)
 	{ //movement
@@ -308,8 +347,6 @@ void fsensor_st_block_begin(block_t* bl)
 		if (_READ(63)) _WRITE(63, LOW);
 		else _WRITE(63, HIGH);
 	}
-//		PINK |= FSENSOR_INT_PIN_MSK; //toggle pin
-//		_WRITE(fsensor_int_pin, LOW);
 }
 
 void fsensor_st_block_chunk(block_t* bl, int cnt)
@@ -321,8 +358,6 @@ void fsensor_st_block_chunk(block_t* bl, int cnt)
 		if (_READ(63)) _WRITE(63, LOW);
 		else _WRITE(63, HIGH);
 	}
-//		PINK |= FSENSOR_INT_PIN_MSK; //toggle pin
-//		_WRITE(fsensor_int_pin, LOW);
 }
 
 void fsensor_update(void)

Firmware/fsensor.h

@@ -18,12 +18,14 @@
 extern void fsensor_stop_and_save_print(void);
 extern void fsensor_restore_print_and_continue(void);
 
+//initialize
 extern void fsensor_init(void);
 
 //enable/disable
 extern bool fsensor_enable(void);
 extern void fsensor_disable(void);
 
+//autoload feature enabled
 extern bool fsensor_autoload_enabled;
 extern void fsensor_autoload_set(bool State);
 
@@ -56,19 +58,11 @@ extern bool fsensor_watch_runout;
 //not responding flag
 extern bool fsensor_not_responding;
 
+//error counter
 extern uint8_t fsensor_err_cnt;
 
 //autoload enable/disable flag
 extern bool fsensor_watch_autoload;
 
-//filament optical quality meassurement
-extern bool     fsensor_oq_meassure;
-extern uint8_t  fsensor_oq_skipchunk;
-extern uint32_t fsensor_oq_st_sum;
-extern uint32_t fsensor_oq_yd_sum;
-extern uint16_t fsensor_oq_er_sum;
-extern uint8_t  fsensor_oq_er_max;
-extern uint16_t fsensor_oq_yd_min;
-extern uint16_t fsensor_oq_yd_max;
 
 #endif //FSENSOR_H

Firmware/ultralcd.cpp

@@ -27,6 +27,10 @@
 #include "pat9125.h"
 #endif //PAT9125
 
+#ifdef FILAMENT_SENSOR
+#include "fsensor.h"
+#endif //FILAMENT_SENSOR
+
 #ifdef TMC2130
 #include "tmc2130.h"
 #endif //TMC2130
@@ -38,12 +42,7 @@
 
 extern int lcd_change_fil_state;
 extern bool fans_check_enabled;
-extern bool fsensor_autoload_enabled;
 
-#ifdef PAT9125
-extern bool fsensor_not_responding;
-extern bool fsensor_enabled;
-#endif //PAT9125
 
 int scrollstuff = 0;
 char longFilenameOLD[LONG_FILENAME_LENGTH];
@@ -2506,7 +2505,7 @@ void lcd_alright() {
 
 }
 
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
 static void lcd_menu_AutoLoadFilament()
 {
     if (degHotend0() > EXTRUDE_MINTEMP)
@@ -2526,7 +2525,7 @@ static void lcd_menu_AutoLoadFilament()
     }
     menu_back_if_clicked();
 }
-#endif //PAT9125
+#endif //FILAMENT_SENSOR
 
 static void lcd_LoadFilament()
 {
@@ -4024,7 +4023,7 @@ static void lcd_crash_mode_info2()
 }
 #endif //TMC2130
 
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
 static void lcd_filament_autoload_info()
 {
 uint8_t nlines;
@@ -4050,7 +4049,7 @@ uint8_t nlines;
 	}
     menu_back_if_clicked();
 }
-#endif //PAT9125
+#endif //FILAMENT_SENSOR
 
 
 static void lcd_silent_mode_set() {
@@ -4107,7 +4106,7 @@ static void lcd_crash_mode_set()
 #endif //TMC2130
  
 
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
 static void lcd_fsensor_state_set()
 {
 	FSensorStateMenu = !FSensorStateMenu; //set also from fsensor_enable() and fsensor_disable()
@@ -4121,7 +4120,7 @@ static void lcd_fsensor_state_set()
             menu_submenu(lcd_fsensor_fail);
     }
 }
-#endif //PAT9125
+#endif //FILAMENT_SENSOR
 
 
 #if !SDSORT_USES_RAM
@@ -4585,19 +4584,17 @@ static void lcd_settings_menu()
 	MENU_BEGIN();
 	MENU_ITEM_BACK_P(_T(MSG_MAIN));
 
-
 	MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE c=0 r=0
 	if (!homing_flag)
-  {
 	MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS c=0 r=0
-  }
 	if (!isPrintPaused)
-  {
 	MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS c=0 r=0
-  }
+
 #ifndef TMC2130
-  if (!farm_mode) { //dont show in menu if we are in farm mode
+	if (!farm_mode)
-	  switch (SilentModeMenu) {
+	{ //dont show in menu if we are in farm mode
+		switch (SilentModeMenu)
+		{
 		case SILENT_MODE_POWER: MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_OFF), lcd_silent_mode_set); break;
 		case SILENT_MODE_SILENT: MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_ON), lcd_silent_mode_set); break;
 		case SILENT_MODE_AUTO: MENU_ITEM_FUNCTION_P(_T(MSG_AUTO_MODE_ON), lcd_silent_mode_set); break;
@@ -4606,41 +4603,37 @@ static void lcd_settings_menu()
 	}
 #endif //TMC2130
 
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
-#ifndef DEBUG_DISABLE_FSENSORCHECK
+	if (FSensorStateMenu == 0)
-  if (FSensorStateMenu == 0) {
+	{
-      if (fsensor_not_responding){
+		if (fsensor_not_responding)
+		{
 			// Filament sensor not working
 			MENU_ITEM_FUNCTION_P(_i("Fil. sensor [N/A]"), lcd_fsensor_state_set);////MSG_FSENSOR_NA c=0 r=0
 			MENU_ITEM_SUBMENU_P(_T(MSG_FSENS_AUTOLOAD_NA), lcd_fsensor_fail);
 		}
-      else{
+		else
+		{
 			// Filament sensor turned off, working, no problems
 			MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);
 			MENU_ITEM_SUBMENU_P(_T(MSG_FSENS_AUTOLOAD_NA), lcd_filament_autoload_info);
 		}
-  } else {
+	}
+	else
+	{
 		// Filament sensor turned on, working, no problems
 		MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_ON), lcd_fsensor_state_set);
-     
+		if (fsensor_autoload_enabled)
-
-      if (fsensor_autoload_enabled) {
 			MENU_ITEM_FUNCTION_P(_i("F. autoload  [on]"), lcd_set_filament_autoload);////MSG_FSENS_AUTOLOAD_ON c=17 r=1
-      }
+		else
-      else {
 			MENU_ITEM_FUNCTION_P(_i("F. autoload [off]"), lcd_set_filament_autoload);////MSG_FSENS_AUTOLOAD_OFF c=17 r=1
 	}
+#endif //FILAMENT_SENSOR
 
-  }
+	if (fans_check_enabled == true)
-#endif //DEBUG_DISABLE_FSENSORCHECK
-#endif //PAT9125
-
-  if (fans_check_enabled == true) {
 		MENU_ITEM_FUNCTION_P(_i("Fans check   [on]"), lcd_set_fan_check);////MSG_FANS_CHECK_ON c=17 r=1
-  }
+	else
-  else {
 		MENU_ITEM_FUNCTION_P(_i("Fans check  [off]"), lcd_set_fan_check);////MSG_FANS_CHECK_OFF c=17 r=1
-  }
 
 #ifdef TMC2130
 	if(!farm_mode)
@@ -4658,41 +4651,37 @@ static void lcd_settings_menu()
 //  MENU_ITEM_SUBMENU_P(_i("Lin. correction"), lcd_settings_linearity_correction_menu);
 #endif //TMC2130
 
-  if (temp_cal_active == false) {
+  if (temp_cal_active == false)
 	  MENU_ITEM_FUNCTION_P(_i("Temp. cal.  [off]"), lcd_temp_calibration_set);////MSG_TEMP_CALIBRATION_OFF c=20 r=1
-  }
+  else
-  else {
 	  MENU_ITEM_FUNCTION_P(_i("Temp. cal.   [on]"), lcd_temp_calibration_set);////MSG_TEMP_CALIBRATION_ON c=20 r=1
-  }
+
 #ifdef HAS_SECOND_SERIAL_PORT
-  if (selectedSerialPort == 0) {
+	if (selectedSerialPort == 0)
 		MENU_ITEM_FUNCTION_P(_i("RPi port    [off]"), lcd_second_serial_set);////MSG_SECOND_SERIAL_OFF c=17 r=1
-  }
+	else
-  else {
 		MENU_ITEM_FUNCTION_P(_i("RPi port     [on]"), lcd_second_serial_set);////MSG_SECOND_SERIAL_ON c=17 r=1
-  }
 #endif //HAS_SECOND_SERIAL
 
 	if (!isPrintPaused && !homing_flag)
-	{
 		MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);
-	}
 
 #if (LANG_MODE != 0)
 	MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT c=0 r=0
 #endif //(LANG_MODE != 0)
 
-  if (card.ToshibaFlashAir_isEnabled()) {
+	if (card.ToshibaFlashAir_isEnabled())
 		MENU_ITEM_FUNCTION_P(_i("SD card [FlshAir]"), lcd_toshiba_flash_air_compatibility_toggle);////MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
-  } else {
+	else
 		MENU_ITEM_FUNCTION_P(_i("SD card  [normal]"), lcd_toshiba_flash_air_compatibility_toggle);////MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
-  }
 
 #ifdef SDCARD_SORT_ALPHA
-	  if (!farm_mode) {
+	if (!farm_mode)
+	{
 		uint8_t sdSort;
 		EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));
-	  switch (sdSort) {
+		switch (sdSort)
+		{
 		  case SD_SORT_TIME: MENU_ITEM_FUNCTION_P(_i("Sort:      [Time]"), lcd_sort_type_set); break;////MSG_SORT_TIME c=17 r=1
 		  case SD_SORT_ALPHA: MENU_ITEM_FUNCTION_P(_i("Sort:  [Alphabet]"), lcd_sort_type_set); break;////MSG_SORT_ALPHA c=17 r=1
 		  default: MENU_ITEM_FUNCTION_P(_i("Sort:      [None]"), lcd_sort_type_set);////MSG_SORT_NONE c=17 r=1
@@ -5962,7 +5951,7 @@ static void lcd_main_menu()
     #endif
 
 	#else
-	  #ifdef PAT9125
+	  #ifdef FILAMENT_SENSOR
 	if ( ((fsensor_autoload_enabled == true) && (fsensor_enabled == true)))
         MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=17 r=0
 	else
@@ -6092,16 +6081,14 @@ static void lcd_tune_menu()
 	MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//7
 #endif
 
-#ifndef DEBUG_DISABLE_FSENSORCHECK
+#ifdef FILAMENT_SENSOR
-#ifdef PAT9125
 	if (FSensorStateMenu == 0) {
 		MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);
 	}
 	else {
 		MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_ON), lcd_fsensor_state_set);
 	}
-#endif //PAT9125
+#endif //FILAMENT_SENSOR
-#endif //DEBUG_DISABLE_FSENSORCHECK
 
 #ifdef TMC2130
      if(!farm_mode)
@@ -6454,16 +6441,16 @@ bool lcd_selftest()
 	if (_result)
 	{
 		_progress = lcd_selftest_screen(8, _progress, 3, true, 2000); //bed ok
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
 		_progress = lcd_selftest_screen(9, _progress, 3, true, 2000); //check filaments sensor
 		_result = lcd_selftest_fsensor();
-#endif // PAT9125
+#endif // FILAMENT_SENSOR
 	}
 	if (_result)
 	{
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
 		_progress = lcd_selftest_screen(10, _progress, 3, true, 2000); //fil sensor OK
-#endif // PAT9125
+#endif // FILAMENT_SENSOR
 		_progress = lcd_selftest_screen(11, _progress, 3, true, 5000); //all correct
 	}
 	else
@@ -7012,8 +6999,9 @@ static void lcd_selftest_error(int _error_no, const char *_error_1, const char *
 
 }
 
-#ifdef PAT9125
+#ifdef FILAMENT_SENSOR
-static bool lcd_selftest_fsensor() {
+static bool lcd_selftest_fsensor(void)
+{
 	fsensor_init();
 	if (fsensor_not_responding)
 	{
@@ -7022,7 +7010,7 @@ static bool lcd_selftest_fsensor() {
 	}
 	return (!fsensor_not_responding);
 }
-#endif //PAT9125
+#endif //FILAMENT_SENSOR
 
 static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite)
 {

Firmware/ultralcd.h

@@ -58,7 +58,7 @@ extern void menu_lcd_lcdupdate_func(void);
   static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator);
   static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite);
   static bool lcd_selftest_fan_dialog(int _fan);
-  static bool lcd_selftest_fsensor();
+  static bool lcd_selftest_fsensor(void);
   static void lcd_selftest_error(int _error_no, const char *_error_1, const char *_error_2);
   void lcd_menu_statistics(); 
 

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -110,7 +110,7 @@
 
 // Filament sensor
 #define PAT9125
-
+#define FILAMENT_SENSOR
 
 
 //#define DEBUG_BUILD
@@ -137,7 +137,6 @@
 //#define DEBUG_XSTEP_DUP_PIN 21   //duplicate x-step output to pin 21 (SCL on P3)
 //#define DEBUG_YSTEP_DUP_PIN 21   //duplicate y-step output to pin 21 (SCL on P3)
 //#define DEBUG_DISABLE_FANCHECK     //disable fan check (no ISR INT7, check disabled)
-//#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
 //#define DEBUG_DUMP_TO_2ND_SERIAL   //dump received characters to 2nd serial line
 //#define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
 //#define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -110,7 +110,7 @@
 
 // Filament sensor
 #define PAT9125
-
+#define FILAMENT_SENSOR
 
 
 //#define DEBUG_BUILD
@@ -137,7 +137,6 @@
 //#define DEBUG_XSTEP_DUP_PIN 21   //duplicate x-step output to pin 21 (SCL on P3)
 //#define DEBUG_YSTEP_DUP_PIN 21   //duplicate y-step output to pin 21 (SCL on P3)
 //#define DEBUG_DISABLE_FANCHECK     //disable fan check (no ISR INT7, check disabled)
-//#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
 //#define DEBUG_DUMP_TO_2ND_SERIAL   //dump received characters to 2nd serial line
 //#define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
 //#define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -133,6 +133,7 @@
 
 // Filament sensor
 #define PAT9125
+#define FILAMENT_SENSOR
 
 // Backlash - 
 //#define BACKLASH_X