diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index 14a92184..7e9da1c1 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -3081,6 +3081,7 @@ void gcode_M701()
 		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence
 		
 		load_filament_final_feed(); //slow sequence
+		st_synchronize();
 
 		if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE)) tone(BEEPER, 500);
 		delay_keep_alive(50);
@@ -8968,7 +8969,6 @@ void load_filament_final_feed()
 	st_synchronize();
 	current_position[E_AXIS]+= FILAMENTCHANGE_FINALFEED;
 	plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200/60, active_extruder);
-	st_synchronize();
 }
 
 void M600_check_state()
@@ -8991,10 +8991,9 @@ void M600_check_state()
 
 				// Filament loaded properly but color is not clear
 				case 3:
-					st_synchronize();
-					current_position[E_AXIS]+= FILAMENTCHANGE_FINALFEED;
-					plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200/60, active_extruder);
+					load_filament_final_feed();
 					lcd_loading_color();
+					st_synchronize();
 					break;
                  
 				// Everything good             
@@ -9114,6 +9113,7 @@ void M600_load_filament_movements()
 #endif                
 	load_filament_final_feed();
 	lcd_loading_filament();
+	st_synchronize();
 }
 
 void M600_load_filament() {
diff --git a/Firmware/mmu.cpp b/Firmware/mmu.cpp
index 2db7d42f..5c1570d4 100644
--- a/Firmware/mmu.cpp
+++ b/Firmware/mmu.cpp
@@ -574,6 +574,7 @@ void mmu_M600_load_filament(bool automatic)
     	  mmu_extruder = tmp_extruder; //filament change is finished
 		  mmu_load_to_nozzle();
 		  load_filament_final_feed();
+		  st_synchronize();
 }
 
 
@@ -1077,6 +1078,7 @@ void lcd_mmu_load_to_nozzle(uint8_t filament_nr)
 	mmu_extruder = tmp_extruder; //filament change is finished
 	mmu_load_to_nozzle();
 	load_filament_final_feed();
+	st_synchronize();
 	custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
 	lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
 	lcd_return_to_status();
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index d619d12b..311d72ca 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -2254,19 +2254,7 @@ void lcd_change_success() {
 
 }
 
-
-void lcd_loading_color() {
-	//we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character
-
-  lcd_clear();
-
-  lcd_set_cursor(0, 0);
-
-  lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR c=0 r=0
-  lcd_set_cursor(0, 2);
-  lcd_puts_P(_T(MSG_PLEASE_WAIT));
-
-
+static void lcd_loading_progress_bar() {
   for (int i = 0; i < 20; i++) {
 
     lcd_set_cursor(i, 3);
@@ -2281,7 +2269,20 @@ void lcd_loading_color() {
 
 
   }
+}
 
+
+void lcd_loading_color() {
+	//we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character
+
+  lcd_clear();
+
+  lcd_set_cursor(0, 0);
+
+  lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR c=0 r=0
+  lcd_set_cursor(0, 2);
+  lcd_puts_P(_T(MSG_PLEASE_WAIT));
+  lcd_loading_progress_bar();
 }
 
 
@@ -2295,7 +2296,7 @@ void lcd_loading_filament() {
   lcd_puts_P(_T(MSG_LOADING_FILAMENT));
   lcd_set_cursor(0, 2);
   lcd_puts_P(_T(MSG_PLEASE_WAIT));
-
+#ifdef SNMM
   for (int i = 0; i < 20; i++) {
 
     lcd_set_cursor(i, 3);
@@ -2303,17 +2304,15 @@ void lcd_loading_filament() {
     for (int j = 0; j < 10 ; j++) {
       manage_heater();
       manage_inactivity(true);
-#ifdef SNMM
-      delay(153);
-#else
-	  delay(137);
-#endif
 
+      delay(153);
     }
 
 
   }
-
+#else //SNMM
+  lcd_loading_progress_bar();
+#endif //SNMM
 }
 
 
@@ -2425,6 +2424,7 @@ void lcd_load_filament_color_check()
 		lcd_update_enable(true);
 		lcd_update(2);
 		load_filament_final_feed();
+		st_synchronize();
 		clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
 	}
 }