From 5bda19b9f7375533d175e8785b997a595337402e Mon Sep 17 00:00:00 2001
From: PavelSindler <sindlerpa@gmail.com>
Date: Thu, 26 Jul 2018 14:59:49 +0200
Subject: [PATCH] config for mmu updated
---
.gitignore | 1 +
.../1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h | 25 ++++++-------------
2 files changed, 9 insertions(+), 17 deletions(-)
diff --git a/.gitignore b/.gitignore
index 53ad84b5..c2e7ec75 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,3 +10,4 @@ Firmware/Doc
/Firmware/Firmware.vcxproj
/Firmware/Firmware.vcxproj.filters
/Firmware/Firmware - Shortcut.lnk
+/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h.bak
diff --git a/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
index b119be12..877a7d1b 100644
--- a/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
@@ -100,16 +100,12 @@
#define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
//Silent mode limits
-#define SILENT_MAX_ACCEL 960ul // max axxeleration in silent mode in mm/s^2
-#define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
-#define SILENT_MAX_FEEDRATE 172 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
+#define SILENT_MAX_ACCEL_XY 960ul // max acceleration in silent mode in mm/s^2
+#define SILENT_MAX_FEEDRATE_XY 172 // max feedrate in mm/s
//Normal mode limits
-#define NORMAL_MAX_ACCEL 2500ul // Y-axis max axxeleration in normal mode in mm/s^2
-#define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
-#define NORMAL_MAX_FEEDRATE 200 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
-
-//#define SIMPLE_ACCEL_LIMIT //new limitation method for normal/silent
+#define NORMAL_MAX_ACCEL_XY 2500ul // max acceleration in normal mode in mm/s^2
+#define NORMAL_MAX_FEEDRATE_XY 200 // max feedrate in mm/s
//number of bytes from end of the file to start check
#define END_FILE_SECTION 10000
@@ -138,10 +134,12 @@
// Filament sensor
#define PAT9125
+#define FILAMENT_SENSOR
+// Backlash -
+//#define BACKLASH_X
+//#define BACKLASH_Y
-// Disable some commands
-#define _DISABLE_M42_M226
// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
@@ -384,13 +382,6 @@
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {400, 750, 750} // {XY,Z,E}
#endif
-/*------------------------------------
- PAT9125 SETTINGS
- *------------------------------------*/
-
-#define PAT9125_XRES 0
-#define PAT9125_YRES 255
-
/*------------------------------------
BED SETTINGS
*------------------------------------*/