3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #3021 from 3d-gussner/PFW-910

Browse Source 
PFW-910 Add remaining time to change/pause/user interaction to LCD Info screen
This commit is contained in:
DRracer 2021-02-15 09:13:50 +01:00 committed by GitHub
commit 2874e704f5
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 142 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Firmware/Configuration_adv.h
View File

@ -338,6 +338,11 @@ const unsigned int dropsegments=5; //everything with less than this number of st
// Control heater 0 and heater 1 in parallel.
//#define HEATERS_PARALLEL
//LCD status clock interval timer to switch between
// remaining print time
// and time to change/pause/interaction
#define CLOCK_INTERVAL_TIME 5
//===========================================================================
//=============================Buffers ============================
//===========================================================================

3
Firmware/Marlin.h
View File

@ -366,6 +366,8 @@ extern uint8_t print_percent_done_normal;
extern uint16_t print_time_remaining_normal;
extern uint8_t print_percent_done_silent;
extern uint16_t print_time_remaining_silent;
extern uint16_t print_time_to_change_normal;
extern uint16_t print_time_to_change_silent;
#define PRINT_TIME_REMAINING_INIT 0xffff
@ -437,7 +439,6 @@ extern void cancel_saved_printing();
//estimated time to end of the print
extern uint16_t print_time_remaining();
extern uint8_t calc_percent_done();

108
Firmware/Marlin_main.cpp
View File

@ -316,6 +316,8 @@ uint8_t print_percent_done_normal = PRINT_PERCENT_DONE_INIT;
uint16_t print_time_remaining_normal = PRINT_TIME_REMAINING_INIT; //estimated remaining print time in minutes
uint8_t print_percent_done_silent = PRINT_PERCENT_DONE_INIT;
uint16_t print_time_remaining_silent = PRINT_TIME_REMAINING_INIT; //estimated remaining print time in minutes
uint16_t print_time_to_change_normal = PRINT_TIME_REMAINING_INIT; //estimated remaining time to next change in minutes
uint16_t print_time_to_change_silent = PRINT_TIME_REMAINING_INIT; //estimated remaining time to next change in minutes
uint32_t IP_address = 0;
@ -6391,31 +6393,37 @@ Sigma_Exit:
#endif // Z_PROBE_REPEATABILITY_TEST
#endif // ENABLE_AUTO_BED_LEVELING
/*!
### M73 - Set/get print progress <a href="https://reprap.org/wiki/G-code#M73:_Set.2FGet_build_percentage">M73: Set/Get build percentage</a>
#### Usage
/*!
### M73 - Set/get print progress <a href="https://reprap.org/wiki/G-code#M73:_Set.2FGet_build_percentage">M73: Set/Get build percentage</a>
#### Usage
M73 [ P | R | Q | S ]
#### Parameters
- `P` - Percent in normal mode
- `R` - Time remaining in normal mode
- `Q` - Percent in silent mode
- `S` - Time in silent mode
*/
case 73: //M73 show percent done and time remaining
if(code_seen('P')) print_percent_done_normal = code_value();
if(code_seen('R')) print_time_remaining_normal = code_value();
if(code_seen('Q')) print_percent_done_silent = code_value();
if(code_seen('S')) print_time_remaining_silent = code_value();
M73 [ P | R | Q | S | C | D ]
{
const char* _msg_mode_done_remain = _N("%S MODE: Percent done: %d; print time remaining in mins: %d\n");
printf_P(_msg_mode_done_remain, _N("NORMAL"), int(print_percent_done_normal), print_time_remaining_normal);
printf_P(_msg_mode_done_remain, _N("SILENT"), int(print_percent_done_silent), print_time_remaining_silent);
}
break;
#### Parameters
- `P` - Percent in normal mode
- `R` - Time remaining in normal mode
- `Q` - Percent in silent mode
- `S` - Time in silent mode
- `C` - Time to change/pause/user interaction in normal mode
- `D` - Time to change/pause/user interaction in silent mode
*/
//!@todo update RepRap Gcode wiki
case 73: //M73 show percent done, time remaining and time to change/pause
{
if(code_seen('P')) print_percent_done_normal = code_value();
if(code_seen('R')) print_time_remaining_normal = code_value();
if(code_seen('Q')) print_percent_done_silent = code_value();
if(code_seen('S')) print_time_remaining_silent = code_value();
if(code_seen('C')) print_time_to_change_normal = code_value();
if(code_seen('D')) print_time_to_change_silent = code_value();
{
const char* _msg_mode_done_remain = _N("%S MODE: Percent done: %d; print time remaining in mins: %d; Change in mins: %d\n");
printf_P(_msg_mode_done_remain, _N("NORMAL"), int(print_percent_done_normal), print_time_remaining_normal, print_time_to_change_normal);
printf_P(_msg_mode_done_remain, _N("SILENT"), int(print_percent_done_silent), print_time_remaining_silent, print_time_to_change_silent);
}
break;
}
/*!
### M104 - Set hotend temperature <a href="https://reprap.org/wiki/G-code#M104:_Set_Extruder_Temperature">M104: Set Extruder Temperature</a>
#### Usage
@ -11653,46 +11661,40 @@ void print_mesh_bed_leveling_table()
SERIAL_ECHOLN();
}
uint16_t print_time_remaining() {
uint16_t print_t = PRINT_TIME_REMAINING_INIT;
#ifdef TMC2130
if (SilentModeMenu == SILENT_MODE_OFF) print_t = print_time_remaining_normal;
else print_t = print_time_remaining_silent;
#else
print_t = print_time_remaining_normal;
#endif //TMC2130
if ((print_t != PRINT_TIME_REMAINING_INIT) && (feedmultiply != 0)) print_t = 100ul * print_t / feedmultiply;
return print_t;
}
uint8_t calc_percent_done()
{
//in case that we have information from M73 gcode return percentage counted by slicer, else return percentage counted as byte_printed/filesize
uint8_t percent_done = 0;
//in case that we have information from M73 gcode return percentage counted by slicer, else return percentage counted as byte_printed/filesize
uint8_t percent_done = 0;
#ifdef TMC2130
if (SilentModeMenu == SILENT_MODE_OFF && print_percent_done_normal <= 100) {
percent_done = print_percent_done_normal;
}
else if (print_percent_done_silent <= 100) {
percent_done = print_percent_done_silent;
}
if (SilentModeMenu == SILENT_MODE_OFF && print_percent_done_normal <= 100)
{
percent_done = print_percent_done_normal;
}
else if (print_percent_done_silent <= 100)
{
percent_done = print_percent_done_silent;
}
#else
if (print_percent_done_normal <= 100) {
percent_done = print_percent_done_normal;
}
if (print_percent_done_normal <= 100)
{
percent_done = print_percent_done_normal;
}
#endif //TMC2130
else {
percent_done = card.percentDone();
}
return percent_done;
else
{
percent_done = card.percentDone();
}
return percent_done;
}
static void print_time_remaining_init()
{
print_time_remaining_normal = PRINT_TIME_REMAINING_INIT;
print_time_remaining_silent = PRINT_TIME_REMAINING_INIT;
print_percent_done_normal = PRINT_PERCENT_DONE_INIT;
print_percent_done_silent = PRINT_PERCENT_DONE_INIT;
print_time_remaining_normal = PRINT_TIME_REMAINING_INIT;
print_percent_done_normal = PRINT_PERCENT_DONE_INIT;
print_time_remaining_silent = PRINT_TIME_REMAINING_INIT;
print_percent_done_silent = PRINT_PERCENT_DONE_INIT;
print_time_to_change_normal = PRINT_TIME_REMAINING_INIT;
print_time_to_change_silent = PRINT_TIME_REMAINING_INIT;
}
void load_filament_final_feed()

106
Firmware/ultralcd.cpp
View File

@ -57,7 +57,7 @@
int scrollstuff = 0;
char longFilenameOLD[LONG_FILENAME_LENGTH];
int clock_interval = 0;
static void lcd_sd_updir();
static void lcd_mesh_bed_leveling_settings();
@ -671,31 +671,85 @@ void lcdui_print_cmd_diag(void)
// Print time (8 chars total)
void lcdui_print_time(void)
{
//if remaining print time estimation is available print it else print elapsed time
uint16_t print_t = 0;
if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
print_t = print_time_remaining();
else if(starttime != 0)
print_t = _millis() / 60000 - starttime / 60000;
int chars = 0;
if ((PRINTER_ACTIVE) && ((print_time_remaining_normal != PRINT_TIME_REMAINING_INIT) || (starttime != 0)))
{
char suff = ' ';
char suff_doubt = ' ';
if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
{
suff = 'R';
if (feedmultiply != 100)
suff_doubt = '?';
}
if (print_t < 6000) //time<100h
chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt);
else //time>=100h
chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt);
}
else
chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]);
lcd_space(8 - chars);
//if remaining print time estimation is available print it else print elapsed time
int chars = 0;
if ((PRINTER_ACTIVE) && (starttime != 0))
{
uint16_t print_t = 0;
uint16_t print_tr = 0;
uint16_t print_tc = 0;
char suff = ' ';
char suff_doubt = ' ';
#ifdef TMC2130
if (SilentModeMenu != SILENT_MODE_OFF)
{
if (print_time_remaining_silent != PRINT_TIME_REMAINING_INIT)
{
print_tr = print_time_remaining_silent;
}
//#ifdef CLOCK_INTERVAL_TIME
if (print_time_to_change_silent != PRINT_TIME_REMAINING_INIT)
{
print_tc = print_time_to_change_silent;
}
//#endif //CLOCK_INTERVAL_TIME
}
else
{
#endif //TMC2130
if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT)
{
print_tr = print_time_remaining_normal;
}
//#ifdef CLOCK_INTERVAL_TIME
if (print_time_to_change_normal != PRINT_TIME_REMAINING_INIT)
{
print_tc = print_time_to_change_normal;
}
//#endif //CLOCK_INTERVAL_TIME
#ifdef TMC2130
}
#endif //TMC2130
//#ifdef CLOCK_INTERVAL_TIME
if (clock_interval == CLOCK_INTERVAL_TIME*2)
{
clock_interval = 0;
}
clock_interval++;
if (print_tc != 0 && clock_interval > CLOCK_INTERVAL_TIME)
{
print_t = print_tc;
suff = 'C';
}
else
//#endif //CLOCK_INTERVAL_TIME
if (print_tr != 0)
{
print_t = print_tr;
suff = 'R';
}
else
{
print_t = _millis() / 60000 - starttime / 60000;
}
if (feedmultiply != 100 && (print_t == print_tr || print_t == print_tc))
{
suff_doubt = '?';
print_t = 100ul * print_t / feedmultiply;
}
if (print_t < 6000) //time<100h
chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt);
else //time>=100h
chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt);
}
else
chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]);
lcd_space(8 - chars);
}
//Print status line on status screen