3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

New ML support - migration - fix_source_1.sh script (replace 'MSG_xx' with '_T(MSG_xx)')

Browse Source 
+ output + fixed source
This commit is contained in:
Robert Pelnar 2018-05-23 16:37:08 +02:00
parent da3432e237
commit 2cf20c8c99
9 changed files with 441 additions and 312 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

154
Firmware/Marlin_main.cpp
View File

@ -664,11 +664,11 @@ void crashdet_detected(uint8_t mask)
#ifdef AUTOMATIC_RECOVERY_AFTER_CRASH #ifdef AUTOMATIC_RECOVERY_AFTER_CRASH
bool yesno = true; bool yesno = true;
#else #else
bool yesno = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_CRASH_DETECTED, false); bool yesno = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_CRASH_DETECTED), false);
#endif #endif
lcd_update_enable(true); lcd_update_enable(true);
lcd_update(2); lcd_update(2);
lcd_setstatuspgm(MSG_CRASH_DETECTED); lcd_setstatuspgm(_T(MSG_CRASH_DETECTED));
if (yesno) if (yesno)
{ {
enquecommand_P(PSTR("G28 X Y")); enquecommand_P(PSTR("G28 X Y"));
@ -1008,12 +1008,12 @@ void setup()
// Check startup - does nothing if bootloader sets MCUSR to 0 // Check startup - does nothing if bootloader sets MCUSR to 0
byte mcu = MCUSR; byte mcu = MCUSR;
/* if (mcu & 1) SERIAL_ECHOLNRPGM(MSG_POWERUP); /* if (mcu & 1) SERIAL_ECHOLNRPGM(_T(MSG_POWERUP));
if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET); if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET);
if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET); if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET);
if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET); if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET);
if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/ if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/
if (mcu & 1) puts_P(MSG_POWERUP); if (mcu & 1) puts_P(_T(MSG_POWERUP));
if (mcu & 2) puts_P(MSG_EXTERNAL_RESET); if (mcu & 2) puts_P(MSG_EXTERNAL_RESET);
if (mcu & 4) puts_P(MSG_BROWNOUT_RESET); if (mcu & 4) puts_P(MSG_BROWNOUT_RESET);
if (mcu & 8) puts_P(MSG_WATCHDOG_RESET); if (mcu & 8) puts_P(MSG_WATCHDOG_RESET);
@ -1348,11 +1348,11 @@ void setup()
// Reset the babystepping values, so the printer will not move the Z axis up when the babystepping is enabled. // Reset the babystepping values, so the printer will not move the Z axis up when the babystepping is enabled.
eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0); eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
// Show the message. // Show the message.
lcd_show_fullscreen_message_and_wait_P(MSG_FOLLOW_CALIBRATION_FLOW); lcd_show_fullscreen_message_and_wait_P(_T(MSG_FOLLOW_CALIBRATION_FLOW));
} }
else if (calibration_status() == CALIBRATION_STATUS_LIVE_ADJUST) { else if (calibration_status() == CALIBRATION_STATUS_LIVE_ADJUST) {
// Show the message. // Show the message.
lcd_show_fullscreen_message_and_wait_P(MSG_BABYSTEP_Z_NOT_SET); lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
lcd_update_enable(true); lcd_update_enable(true);
} }
else if (calibration_status() == CALIBRATION_STATUS_CALIBRATED && temp_cal_active == true && calibration_status_pinda() == false) { else if (calibration_status() == CALIBRATION_STATUS_CALIBRATED && temp_cal_active == true && calibration_status_pinda() == false) {
@ -1361,7 +1361,7 @@ void setup()
} }
else if (calibration_status() == CALIBRATION_STATUS_Z_CALIBRATION) { else if (calibration_status() == CALIBRATION_STATUS_Z_CALIBRATION) {
// Show the message. // Show the message.
lcd_show_fullscreen_message_and_wait_P(MSG_FOLLOW_CALIBRATION_FLOW); lcd_show_fullscreen_message_and_wait_P(_T(MSG_FOLLOW_CALIBRATION_FLOW));
} }
} }
@ -1404,12 +1404,12 @@ void setup()
#ifdef UVLO_SUPPORT #ifdef UVLO_SUPPORT
if (eeprom_read_byte((uint8_t*)EEPROM_UVLO) == 1) { //previous print was terminated by UVLO if (eeprom_read_byte((uint8_t*)EEPROM_UVLO) == 1) { //previous print was terminated by UVLO
/* /*
if (lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_RECOVER_PRINT, false)) recover_print(); if (lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_RECOVER_PRINT), false)) recover_print();
else { else {
eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0); eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0);
lcd_update_enable(true); lcd_update_enable(true);
lcd_update(2); lcd_update(2);
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
} }
*/ */
manage_heater(); // Update temperatures manage_heater(); // Update temperatures
@ -1430,12 +1430,12 @@ void setup()
#ifdef DEBUG_UVLO_AUTOMATIC_RECOVER #ifdef DEBUG_UVLO_AUTOMATIC_RECOVER
MYSERIAL.println("Normal recovery!"); MYSERIAL.println("Normal recovery!");
#endif #endif
if ( lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_RECOVER_PRINT, false) ) recover_print(0); if ( lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_RECOVER_PRINT), false) ) recover_print(0);
else { else {
eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0); eeprom_update_byte((uint8_t*)EEPROM_UVLO, 0);
lcd_update_enable(true); lcd_update_enable(true);
lcd_update(2); lcd_update(2);
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
} }
} }
@ -1630,7 +1630,7 @@ void loop()
if(card.logging) if(card.logging)
process_commands(); process_commands();
else else
SERIAL_PROTOCOLLNRPGM(MSG_OK); SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
} else { } else {
card.closefile(); card.closefile();
SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED); SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED);
@ -1880,7 +1880,7 @@ static float probe_pt(float x, float y, float z_before) {
run_z_probe(); run_z_probe();
float measured_z = current_position[Z_AXIS]; float measured_z = current_position[Z_AXIS];
SERIAL_PROTOCOLRPGM(MSG_BED); SERIAL_PROTOCOLRPGM(_T(MSG_BED));
SERIAL_PROTOCOLPGM(" x: "); SERIAL_PROTOCOLPGM(" x: ");
SERIAL_PROTOCOL(x); SERIAL_PROTOCOL(x);
SERIAL_PROTOCOLPGM(" y: "); SERIAL_PROTOCOLPGM(" y: ");
@ -1943,9 +1943,9 @@ bool check_commands() {
#ifdef TMC2130 #ifdef TMC2130
bool calibrate_z_auto() bool calibrate_z_auto()
{ {
//lcd_display_message_fullscreen_P(MSG_CALIBRATE_Z_AUTO); //lcd_display_message_fullscreen_P(_T(MSG_CALIBRATE_Z_AUTO));
lcd_implementation_clear(); lcd_implementation_clear();
lcd_print_at_PGM(0,1, MSG_CALIBRATE_Z_AUTO); lcd_print_at_PGM(0,1, _T(MSG_CALIBRATE_Z_AUTO));
bool endstops_enabled = enable_endstops(true); bool endstops_enabled = enable_endstops(true);
int axis_up_dir = -home_dir(Z_AXIS); int axis_up_dir = -home_dir(Z_AXIS);
tmc2130_home_enter(Z_AXIS_MASK); tmc2130_home_enter(Z_AXIS_MASK);
@ -2299,7 +2299,7 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
// Home in the XY plane. // Home in the XY plane.
//set_destination_to_current(); //set_destination_to_current();
setup_for_endstop_move(); setup_for_endstop_move();
lcd_display_message_fullscreen_P(MSG_AUTO_HOME); lcd_display_message_fullscreen_P(_T(MSG_AUTO_HOME));
home_xy(); home_xy();
enable_endstops(false); enable_endstops(false);
@ -2327,15 +2327,15 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
{ {
KEEPALIVE_STATE(PAUSED_FOR_USER); KEEPALIVE_STATE(PAUSED_FOR_USER);
#ifdef STEEL_SHEET #ifdef STEEL_SHEET
bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_STEEL_SHEET_CHECK, false, false); bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
if(result) lcd_show_fullscreen_message_and_wait_P(MSG_REMOVE_STEEL_SHEET); if(result) lcd_show_fullscreen_message_and_wait_P(_T(MSG_REMOVE_STEEL_SHEET));
#endif //STEEL_SHEET #endif //STEEL_SHEET
lcd_show_fullscreen_message_and_wait_P(MSG_CONFIRM_NOZZLE_CLEAN); lcd_show_fullscreen_message_and_wait_P(_T(MSG_CONFIRM_NOZZLE_CLEAN));
lcd_show_fullscreen_message_and_wait_P(MSG_PAPER); lcd_show_fullscreen_message_and_wait_P(_T(MSG_PAPER));
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
lcd_display_message_fullscreen_P(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1); lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1));
lcd_implementation_print_at(0, 2, 1); lcd_implementation_print_at(0, 2, 1);
lcd_printPGM(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2); lcd_printPGM(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
} }
// Move the print head close to the bed. // Move the print head close to the bed.
current_position[Z_AXIS] = MESH_HOME_Z_SEARCH; current_position[Z_AXIS] = MESH_HOME_Z_SEARCH;
@ -2428,7 +2428,7 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
{ {
// Calibration valid, the machine should be able to print. Advise the user to run the V2Calibration.gcode. // Calibration valid, the machine should be able to print. Advise the user to run the V2Calibration.gcode.
calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST); calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) != 1) lcd_show_fullscreen_message_and_wait_P(MSG_BABYSTEP_Z_NOT_SET); if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) != 1) lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
final_result = true; final_result = true;
} }
} }
@ -2485,7 +2485,7 @@ void gcode_M701()
custom_message = true; custom_message = true;
custom_message_type = 2; custom_message_type = 2;
lcd_setstatuspgm(MSG_LOADING_FILAMENT); lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
current_position[E_AXIS] += 70; current_position[E_AXIS] += 70;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 400 / 60, active_extruder); //fast sequence
@ -2498,7 +2498,7 @@ void gcode_M701()
noTone(BEEPER); noTone(BEEPER);
if (!farm_mode && loading_flag) { if (!farm_mode && loading_flag) {
bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FILAMENT_CLEAN, false, true); bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
while (!clean) { while (!clean) {
lcd_update_enable(true); lcd_update_enable(true);
@ -2506,14 +2506,14 @@ void gcode_M701()
current_position[E_AXIS] += 25; current_position[E_AXIS] += 25;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 100 / 60, active_extruder); //slow sequence plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 100 / 60, active_extruder); //slow sequence
st_synchronize(); st_synchronize();
clean = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_FILAMENT_CLEAN, false, true); clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true);
} }
} }
lcd_update_enable(true); lcd_update_enable(true);
lcd_update(2); lcd_update(2);
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
disable_z(); disable_z();
loading_flag = false; loading_flag = false;
custom_message = false; custom_message = false;
@ -2777,7 +2777,7 @@ void process_commands()
disable_e2(); disable_e2();
delay(100); delay(100);
//LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE); //LCD_ALERTMESSAGEPGM(_T(MSG_FILAMENTCHANGE));
uint8_t cnt=0; uint8_t cnt=0;
int counterBeep = 0; int counterBeep = 0;
lcd_wait_interact(); lcd_wait_interact();
@ -3405,7 +3405,7 @@ void process_commands()
feedrate = homing_feedrate[Z_AXIS]; feedrate = homing_feedrate[Z_AXIS];
run_z_probe(); run_z_probe();
SERIAL_PROTOCOLPGM(MSG_BED); SERIAL_PROTOCOLPGM(_T(MSG_BED));
SERIAL_PROTOCOLPGM(" X: "); SERIAL_PROTOCOLPGM(" X: ");
SERIAL_PROTOCOL(current_position[X_AXIS]); SERIAL_PROTOCOL(current_position[X_AXIS]);
SERIAL_PROTOCOLPGM(" Y: "); SERIAL_PROTOCOLPGM(" Y: ");
@ -3437,7 +3437,7 @@ void process_commands()
feedrate = homing_feedrate[Z_AXIS]; feedrate = homing_feedrate[Z_AXIS];
find_bed_induction_sensor_point_z(-10.f, 3); find_bed_induction_sensor_point_z(-10.f, 3);
SERIAL_PROTOCOLRPGM(MSG_BED); SERIAL_PROTOCOLRPGM(_T(MSG_BED));
SERIAL_PROTOCOLPGM(" X: "); SERIAL_PROTOCOLPGM(" X: ");
MYSERIAL.print(current_position[X_AXIS], 5); MYSERIAL.print(current_position[X_AXIS], 5);
SERIAL_PROTOCOLPGM(" Y: "); SERIAL_PROTOCOLPGM(" Y: ");
@ -3475,7 +3475,7 @@ void process_commands()
break; break;
} }
lcd_show_fullscreen_message_and_wait_P(_i("Stable ambient temperature 21-26C is needed a rigid stand is required."));////MSG_TEMP_CAL_WARNING c=20 r=4 lcd_show_fullscreen_message_and_wait_P(_i("Stable ambient temperature 21-26C is needed a rigid stand is required."));////MSG_TEMP_CAL_WARNING c=20 r=4
bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_STEEL_SHEET_CHECK, false, false); bool result = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false);
if (result) if (result)
{ {
@ -3483,7 +3483,7 @@ void process_commands()
current_position[Y_AXIS] += 180; current_position[Y_AXIS] += 180;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
st_synchronize(); st_synchronize();
lcd_show_fullscreen_message_and_wait_P(MSG_REMOVE_STEEL_SHEET); lcd_show_fullscreen_message_and_wait_P(_T(MSG_REMOVE_STEEL_SHEET));
current_position[Y_AXIS] -= 180; current_position[Y_AXIS] -= 180;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
st_synchronize(); st_synchronize();
@ -3521,7 +3521,7 @@ void process_commands()
custom_message = true; custom_message = true;
custom_message_type = 4; custom_message_type = 4;
custom_message_state = 1; custom_message_state = 1;
custom_message = MSG_TEMP_CALIBRATION; custom_message = _T(MSG_TEMP_CALIBRATION);
current_position[X_AXIS] = PINDA_PREHEAT_X; current_position[X_AXIS] = PINDA_PREHEAT_X;
current_position[Y_AXIS] = PINDA_PREHEAT_Y; current_position[Y_AXIS] = PINDA_PREHEAT_Y;
current_position[Z_AXIS] = PINDA_PREHEAT_Z; current_position[Z_AXIS] = PINDA_PREHEAT_Z;
@ -3637,7 +3637,7 @@ void process_commands()
custom_message = true; custom_message = true;
custom_message_type = 4; custom_message_type = 4;
custom_message_state = 1; custom_message_state = 1;
custom_message = MSG_TEMP_CALIBRATION; custom_message = _T(MSG_TEMP_CALIBRATION);
current_position[X_AXIS] = PINDA_PREHEAT_X; current_position[X_AXIS] = PINDA_PREHEAT_X;
current_position[Y_AXIS] = PINDA_PREHEAT_Y; current_position[Y_AXIS] = PINDA_PREHEAT_Y;
current_position[Z_AXIS] = PINDA_PREHEAT_Z; current_position[Z_AXIS] = PINDA_PREHEAT_Z;
@ -3726,7 +3726,7 @@ void process_commands()
disable_e1(); disable_e1();
disable_e2(); disable_e2();
setTargetBed(0); //set bed target temperature back to 0 setTargetBed(0); //set bed target temperature back to 0
lcd_show_fullscreen_message_and_wait_P(MSG_TEMP_CALIBRATION_DONE); lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE));
temp_cal_active = true; temp_cal_active = true;
eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1); eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1);
lcd_update_enable(true); lcd_update_enable(true);
@ -3803,7 +3803,7 @@ void process_commands()
//previously enqueued "G28 W0" failed (crash Z) //previously enqueued "G28 W0" failed (crash Z)
if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && !axis_known_position[Z_AXIS] && (READ(Z_TMC2130_DIAG) != 0)) if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS] && !axis_known_position[Z_AXIS] && (READ(Z_TMC2130_DIAG) != 0))
{ {
kill(MSG_BED_LEVELING_FAILED_POINT_LOW); kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
break; break;
} }
#endif //TMC2130 #endif //TMC2130
@ -3955,7 +3955,7 @@ void process_commands()
// Go down until endstop is hit // Go down until endstop is hit
const float Z_CALIBRATION_THRESHOLD = 1.f; const float Z_CALIBRATION_THRESHOLD = 1.f;
if (!find_bed_induction_sensor_point_z((has_z && mesh_point > 0) ? z0 - Z_CALIBRATION_THRESHOLD : -10.f)) { //if we have data from z calibration max allowed difference is 1mm for each point, if we dont have data max difference is 10mm from initial point if (!find_bed_induction_sensor_point_z((has_z && mesh_point > 0) ? z0 - Z_CALIBRATION_THRESHOLD : -10.f)) { //if we have data from z calibration max allowed difference is 1mm for each point, if we dont have data max difference is 10mm from initial point
kill_message = MSG_BED_LEVELING_FAILED_POINT_LOW; kill_message = _T(MSG_BED_LEVELING_FAILED_POINT_LOW);
break; break;
} }
if (MESH_HOME_Z_SEARCH - current_position[Z_AXIS] < 0.1f) { if (MESH_HOME_Z_SEARCH - current_position[Z_AXIS] < 0.1f) {
@ -4317,7 +4317,7 @@ void process_commands()
if (IS_SD_PRINTING) if (IS_SD_PRINTING)
LCD_MESSAGERPGM(_i("Resuming print"));////MSG_RESUMING c=0 r=0 LCD_MESSAGERPGM(_i("Resuming print"));////MSG_RESUMING c=0 r=0
else else
LCD_MESSAGERPGM(WELCOME_MSG); LCD_MESSAGERPGM(_T(WELCOME_MSG));
} }
break; break;
#endif #endif
@ -4945,7 +4945,7 @@ Sigma_Exit:
if(setTargetedHotend(109)){ if(setTargetedHotend(109)){
break; break;
} }
LCD_MESSAGERPGM(MSG_HEATING); LCD_MESSAGERPGM(_T(MSG_HEATING));
heating_status = 1; heating_status = 1;
if (farm_mode) { prusa_statistics(1); }; if (farm_mode) { prusa_statistics(1); };
@ -4981,7 +4981,7 @@ Sigma_Exit:
wait_for_heater(codenum); //loops until target temperature is reached wait_for_heater(codenum); //loops until target temperature is reached
LCD_MESSAGERPGM(MSG_HEATING_COMPLETE); LCD_MESSAGERPGM(_T(MSG_HEATING_COMPLETE));
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
heating_status = 2; heating_status = 2;
if (farm_mode) { prusa_statistics(2); }; if (farm_mode) { prusa_statistics(2); };
@ -4992,7 +4992,7 @@ Sigma_Exit:
break; break;
case 190: // M190 - Wait for bed heater to reach target. case 190: // M190 - Wait for bed heater to reach target.
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
LCD_MESSAGERPGM(MSG_BED_HEATING); LCD_MESSAGERPGM(_T(MSG_BED_HEATING));
heating_status = 3; heating_status = 3;
if (farm_mode) { prusa_statistics(1); }; if (farm_mode) { prusa_statistics(1); };
if (code_seen('S')) if (code_seen('S'))
@ -5032,7 +5032,7 @@ Sigma_Exit:
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
} }
LCD_MESSAGERPGM(MSG_BED_DONE); LCD_MESSAGERPGM(_T(MSG_BED_DONE));
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
heating_status = 4; heating_status = 4;
@ -5069,7 +5069,7 @@ Sigma_Exit:
#ifdef ULTIPANEL #ifdef ULTIPANEL
powersupply = true; powersupply = true;
LCD_MESSAGERPGM(WELCOME_MSG); LCD_MESSAGERPGM(_T(WELCOME_MSG));
lcd_update(); lcd_update();
#endif #endif
break; break;
@ -5100,7 +5100,7 @@ Sigma_Exit:
MSGOFF = "Vypnuto" MSGOFF = "Vypnuto"
"Prusai3"" ""vypnuto""." "Prusai3"" ""vypnuto""."
"Prusa i3"" "MSG_ALL[lang_selected][50]"." "Prusa i3"" "_T(MSG_ALL)[lang_selected][50]"."
*/ */
lcd_update(); lcd_update();
#endif #endif
@ -5230,54 +5230,54 @@ Sigma_Exit:
#if defined(X_MIN_PIN) && X_MIN_PIN > -1 #if defined(X_MIN_PIN) && X_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN c=0 r=0 SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN c=0 r=0
if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){ if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(X_MAX_PIN) && X_MAX_PIN > -1 #if defined(X_MAX_PIN) && X_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX c=0 r=0 SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX c=0 r=0
if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){ if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1 #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN c=0 r=0 SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN c=0 r=0
if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){ if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1 #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX c=0 r=0 SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX c=0 r=0
if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){ if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Z_MIN_PIN) && Z_MIN_PIN > -1 #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(MSG_Z_MIN); SERIAL_PROTOCOLRPGM(MSG_Z_MIN);
if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){ if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Z_MAX_PIN) && Z_MAX_PIN > -1 #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(MSG_Z_MAX); SERIAL_PROTOCOLRPGM(MSG_Z_MAX);
if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){ if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT));
}else{ }else{
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN); SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN));
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
@ -5588,7 +5588,7 @@ Sigma_Exit:
} }
} }
else if (servo_index >= 0) { else if (servo_index >= 0) {
SERIAL_PROTOCOL(MSG_OK); SERIAL_PROTOCOL(_T(MSG_OK));
SERIAL_PROTOCOL(" Servo "); SERIAL_PROTOCOL(" Servo ");
SERIAL_PROTOCOL(servo_index); SERIAL_PROTOCOL(servo_index);
SERIAL_PROTOCOL(": "); SERIAL_PROTOCOL(": ");
@ -5636,7 +5636,7 @@ Sigma_Exit:
#endif #endif
updatePID(); updatePID();
SERIAL_PROTOCOLRPGM(MSG_OK); SERIAL_PROTOCOLRPGM(_T(MSG_OK));
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(Kp); SERIAL_PROTOCOL(Kp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
@ -5660,7 +5660,7 @@ Sigma_Exit:
if(code_seen('D')) bedKd = scalePID_d(code_value()); if(code_seen('D')) bedKd = scalePID_d(code_value());
updatePID(); updatePID();
SERIAL_PROTOCOLRPGM(MSG_OK); SERIAL_PROTOCOLRPGM(_T(MSG_OK));
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(bedKp); SERIAL_PROTOCOL(bedKp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
@ -5788,7 +5788,7 @@ Sigma_Exit:
{ {
zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", MSG_OK,PSTR(""))); SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", _T(MSG_OK),PSTR("")));
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
} }
else else
@ -5911,7 +5911,7 @@ Sigma_Exit:
fanSpeed = 0; fanSpeed = 0;
unsigned long waiting_start_time = millis(); unsigned long waiting_start_time = millis();
uint8_t wait_for_user_state = 0; uint8_t wait_for_user_state = 0;
lcd_display_message_fullscreen_P(MSG_PRESS_TO_UNLOAD); lcd_display_message_fullscreen_P(_T(MSG_PRESS_TO_UNLOAD));
while (!(wait_for_user_state == 0 && lcd_clicked())){ while (!(wait_for_user_state == 0 && lcd_clicked())){
//cnt++; //cnt++;
@ -5977,7 +5977,7 @@ Sigma_Exit:
case 2: case 2:
if (abs(degTargetHotend(active_extruder) - degHotend(active_extruder)) < 1) { if (abs(degTargetHotend(active_extruder) - degHotend(active_extruder)) < 1) {
lcd_display_message_fullscreen_P(MSG_PRESS_TO_UNLOAD); lcd_display_message_fullscreen_P(_T(MSG_PRESS_TO_UNLOAD));
waiting_start_time = millis(); waiting_start_time = millis();
wait_for_user_state = 0; wait_for_user_state = 0;
} }
@ -5997,10 +5997,10 @@ Sigma_Exit:
// Unload filament // Unload filament
lcd_display_message_fullscreen_P(MSG_UNLOADING_FILAMENT); lcd_display_message_fullscreen_P(_T(MSG_UNLOADING_FILAMENT));
KEEPALIVE_STATE(IN_HANDLER); KEEPALIVE_STATE(IN_HANDLER);
custom_message = true; custom_message = true;
lcd_setstatuspgm(MSG_UNLOADING_FILAMENT); lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
if (code_seen('L')) if (code_seen('L'))
{ {
@ -6074,7 +6074,7 @@ Sigma_Exit:
//finish moves //finish moves
st_synchronize(); st_synchronize();
lcd_display_message_fullscreen_P(MSG_PULL_OUT_FILAMENT); lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT));
//disable extruder steppers so filament can be removed //disable extruder steppers so filament can be removed
disable_e0(); disable_e0();
@ -6268,7 +6268,7 @@ Sigma_Exit:
sprintf_P(cmd, PSTR("M220 S%i"), feedmultiplyBckp); sprintf_P(cmd, PSTR("M220 S%i"), feedmultiplyBckp);
enquecommand(cmd); enquecommand(cmd);
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false; custom_message = false;
custom_message_type = 0; custom_message_type = 0;
@ -6315,7 +6315,7 @@ Sigma_Exit:
break; break;
} }
LCD_MESSAGERPGM(MSG_PLEASE_WAIT); LCD_MESSAGERPGM(_T(MSG_PLEASE_WAIT));
SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:"); SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:");
SERIAL_PROTOCOL(setTargetPinda); SERIAL_PROTOCOL(setTargetPinda);
@ -6340,7 +6340,7 @@ Sigma_Exit:
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
} }
LCD_MESSAGERPGM(MSG_OK); LCD_MESSAGERPGM(_T(MSG_OK));
break; break;
} }
@ -6612,7 +6612,7 @@ Sigma_Exit:
#endif //PAT9125 #endif //PAT9125
custom_message = true; custom_message = true;
custom_message_type = 2; custom_message_type = 2;
lcd_setstatuspgm(MSG_UNLOADING_FILAMENT); lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT));
// extr_unload2(); // extr_unload2();
@ -6626,7 +6626,7 @@ Sigma_Exit:
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1000 / 60, active_extruder); plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1000 / 60, active_extruder);
st_synchronize(); st_synchronize();
lcd_display_message_fullscreen_P(MSG_PULL_OUT_FILAMENT); lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT));
//disable extruder steppers so filament can be removed //disable extruder steppers so filament can be removed
disable_e0(); disable_e0();
@ -6648,7 +6648,7 @@ Sigma_Exit:
lcd_update_enable(true); lcd_update_enable(true);
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false; custom_message = false;
custom_message_type = 0; custom_message_type = 0;
#ifdef PAT9125 #ifdef PAT9125
@ -6844,7 +6844,7 @@ void FlushSerialRequestResend()
SERIAL_PROTOCOLRPGM(_i("Resend: "));////MSG_RESEND c=0 r=0 SERIAL_PROTOCOLRPGM(_i("Resend: "));////MSG_RESEND c=0 r=0
SERIAL_PROTOCOLLN(gcode_LastN + 1); SERIAL_PROTOCOLLN(gcode_LastN + 1);
previous_millis_cmd = millis(); previous_millis_cmd = millis();
SERIAL_PROTOCOLLNRPGM(MSG_OK); SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
} }
// Confirm the execution of a command, if sent from a serial line. // Confirm the execution of a command, if sent from a serial line.
@ -6853,7 +6853,7 @@ void ClearToSend()
{ {
previous_millis_cmd = millis(); previous_millis_cmd = millis();
if (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB) if (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB)
SERIAL_PROTOCOLLNRPGM(MSG_OK); SERIAL_PROTOCOLLNRPGM(_T(MSG_OK));
} }
#if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3 #if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
@ -7191,9 +7191,9 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument s
lcd_update_enable(false); lcd_update_enable(false);
lcd_implementation_clear(); lcd_implementation_clear();
lcd.setCursor(0, 0); lcd.setCursor(0, 0);
lcd_printPGM(MSG_ERROR); lcd_printPGM(_T(MSG_ERROR));
lcd.setCursor(0, 2); lcd.setCursor(0, 2);
lcd_printPGM(MSG_PREHEAT_NOZZLE); lcd_printPGM(_T(MSG_PREHEAT_NOZZLE));
delay(2000); delay(2000);
lcd_implementation_clear(); lcd_implementation_clear();
lcd_update_enable(true); lcd_update_enable(true);
@ -7351,8 +7351,8 @@ void Stop()
Stopped = true; Stopped = true;
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNRPGM(_T(MSG_ERR_STOPPED));
LCD_MESSAGERPGM(MSG_STOPPED); LCD_MESSAGERPGM(_T(MSG_STOPPED));
} }
} }

14
Firmware/cardreader.cpp
View File

@ -211,7 +211,7 @@ void CardReader::initsd()
/* /*
if(!workDir.openRoot(&volume)) if(!workDir.openRoot(&volume))
{ {
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); SERIAL_ECHOLNPGM(_T(MSG_SD_WORKDIR_FAIL));
} }
*/ */
@ -221,7 +221,7 @@ void CardReader::setroot()
{ {
/*if(!workDir.openRoot(&volume)) /*if(!workDir.openRoot(&volume))
{ {
SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); SERIAL_ECHOLNPGM(_T(MSG_SD_WORKDIR_FAIL));
}*/ }*/
workDir=root; workDir=root;
@ -360,7 +360,7 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
SERIAL_ECHOLN(subdirname); SERIAL_ECHOLN(subdirname);
if(!myDir.open(curDir,subdirname,O_READ)) if(!myDir.open(curDir,subdirname,O_READ))
{ {
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(subdirname); SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
return; return;
@ -405,7 +405,7 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
} }
else else
{ {
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
} }
@ -414,7 +414,7 @@ void CardReader::openFile(char* name,bool read, bool replace_current/*=true*/)
{ //write { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
{ {
SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL); SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
} }
@ -546,7 +546,7 @@ void CardReader::write_command(char *buf)
if (file.writeError) if (file.writeError)
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE); SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE));
} }
} }
@ -558,7 +558,7 @@ void CardReader::write_command_no_newline(char *buf)
if (file.writeError) if (file.writeError)
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE); SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE));
MYSERIAL.println("An error while writing to the SD Card."); MYSERIAL.println("An error while writing to the SD Card.");
} }
} }

8
Firmware/cmdqueue.cpp
View File

@ -286,7 +286,7 @@ void enquecommand(const char *cmd, bool from_progmem)
else else
strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd); strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd);
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_Enqueing); SERIAL_ECHORPGM(_T(MSG_Enqueing));
SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE); SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
bufindw += len + (CMDHDRSIZE + 1); bufindw += len + (CMDHDRSIZE + 1);
@ -298,7 +298,7 @@ void enquecommand(const char *cmd, bool from_progmem)
#endif /* CMDBUFFER_DEBUG */ #endif /* CMDBUFFER_DEBUG */
} else { } else {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ECHORPGM(MSG_Enqueing); SERIAL_ECHORPGM(_T(MSG_Enqueing));
if (from_progmem) if (from_progmem)
SERIAL_PROTOCOLRPGM(cmd); SERIAL_PROTOCOLRPGM(cmd);
else else
@ -483,8 +483,8 @@ void get_command()
if (Stopped == true) { if (Stopped == true) {
int gcode = strtol(strchr_pointer+1, NULL, 10); int gcode = strtol(strchr_pointer+1, NULL, 10);
if (gcode >= 0 && gcode <= 3) { if (gcode >= 0 && gcode <= 3) {
SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED); SERIAL_ERRORLNRPGM(_T(MSG_ERR_STOPPED));
LCD_MESSAGERPGM(MSG_STOPPED); LCD_MESSAGERPGM(_T(MSG_STOPPED));
} }
} }
} // end of 'G' command } // end of 'G' command

18
Firmware/mesh_bed_calibration.cpp
View File

@ -2182,7 +2182,7 @@ BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level
#endif // SUPPORT_VERBOSITY #endif // SUPPORT_VERBOSITY
#ifdef MESH_BED_CALIBRATION_SHOW_LCD #ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line; uint8_t next_line;
lcd_display_message_fullscreen_P(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1, next_line); lcd_display_message_fullscreen_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1), next_line);
if (next_line > 3) if (next_line > 3)
next_line = 3; next_line = 3;
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */ #endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2194,7 +2194,7 @@ BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level
refresh_cmd_timeout(); refresh_cmd_timeout();
#ifdef MESH_BED_CALIBRATION_SHOW_LCD #ifdef MESH_BED_CALIBRATION_SHOW_LCD
lcd_implementation_print_at(0, next_line, k + 1); lcd_implementation_print_at(0, next_line, k + 1);
lcd_printPGM(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2); lcd_printPGM(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
if (iteration > 0) { if (iteration > 0) {
lcd_print_at_PGM(0, next_line + 1, _i("Iteration "));////MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 lcd_print_at_PGM(0, next_line + 1, _i("Iteration "));////MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
@ -2725,7 +2725,7 @@ bool sample_z() {
go_to_current(homing_feedrate[Z_AXIS] / 60); go_to_current(homing_feedrate[Z_AXIS] / 60);
//plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder);); //plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder););
lcd_show_fullscreen_message_and_wait_P(MSG_PLACE_STEEL_SHEET); lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET));
// Sample Z heights for the mesh bed leveling. // Sample Z heights for the mesh bed leveling.
// In addition, store the results into an eeprom, to be used later for verification of the bed leveling process. // In addition, store the results into an eeprom, to be used later for verification of the bed leveling process.
@ -2767,12 +2767,12 @@ bool sample_mesh_and_store_reference()
#ifdef MESH_BED_CALIBRATION_SHOW_LCD #ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line; uint8_t next_line;
lcd_display_message_fullscreen_P(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1, next_line); lcd_display_message_fullscreen_P(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1), next_line);
if (next_line > 3) if (next_line > 3)
next_line = 3; next_line = 3;
// display "point xx of yy" // display "point xx of yy"
lcd_implementation_print_at(0, next_line, 1); lcd_implementation_print_at(0, next_line, 1);
lcd_printPGM(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2); lcd_printPGM(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */ #endif /* MESH_BED_CALIBRATION_SHOW_LCD */
// Sample Z heights for the mesh bed leveling. // Sample Z heights for the mesh bed leveling.
@ -2792,7 +2792,7 @@ bool sample_mesh_and_store_reference()
#ifdef TMC2130 #ifdef TMC2130
if (!axis_known_position[Z_AXIS] && (READ(Z_TMC2130_DIAG) != 0)) //Z crash if (!axis_known_position[Z_AXIS] && (READ(Z_TMC2130_DIAG) != 0)) //Z crash
{ {
kill(MSG_BED_LEVELING_FAILED_POINT_LOW); kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false; return false;
} }
#endif //TMC2130 #endif //TMC2130
@ -2800,7 +2800,7 @@ bool sample_mesh_and_store_reference()
enable_endstops(false); enable_endstops(false);
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{ {
kill(MSG_BED_LEVELING_FAILED_POINT_LOW); kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false; return false;
} }
mbl.set_z(0, 0, current_position[Z_AXIS]); mbl.set_z(0, 0, current_position[Z_AXIS]);
@ -2818,11 +2818,11 @@ bool sample_mesh_and_store_reference()
#ifdef MESH_BED_CALIBRATION_SHOW_LCD #ifdef MESH_BED_CALIBRATION_SHOW_LCD
// display "point xx of yy" // display "point xx of yy"
lcd_implementation_print_at(0, next_line, mesh_point+1); lcd_implementation_print_at(0, next_line, mesh_point+1);
lcd_printPGM(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2); lcd_printPGM(_T(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2));
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */ #endif /* MESH_BED_CALIBRATION_SHOW_LCD */
if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um if (!find_bed_induction_sensor_point_z()) //Z crash or deviation > 50um
{ {
kill(MSG_BED_LEVELING_FAILED_POINT_LOW); kill(_T(MSG_BED_LEVELING_FAILED_POINT_LOW));
return false; return false;
} }
// Get cords of measuring point // Get cords of measuring point

8
Firmware/stepper.cpp
View File

@ -227,18 +227,18 @@ void checkHitEndstops()
{ {
if( endstop_x_hit || endstop_y_hit || endstop_z_hit) { if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_ENDSTOPS_HIT); SERIAL_ECHORPGM(_T(MSG_ENDSTOPS_HIT));
if(endstop_x_hit) { if(endstop_x_hit) {
SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]); SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT, PSTR("X"))); LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("X")));
} }
if(endstop_y_hit) { if(endstop_y_hit) {
SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]); SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/axis_steps_per_unit[Y_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT, PSTR("Y"))); LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("Y")));
} }
if(endstop_z_hit) { if(endstop_z_hit) {
SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGERPGM(CAT2(MSG_ENDSTOPS_HIT,PSTR("Z"))); LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT),PSTR("Z")));
} }
SERIAL_ECHOLN(""); SERIAL_ECHOLN("");
endstop_x_hit=false; endstop_x_hit=false;

408
Firmware/ultralcd.cpp
View File

File diff suppressed because it is too large Load Diff

14
Firmware/ultralcd_implementation_hitachi_HD44780.h
View File

@ -934,22 +934,22 @@ if (print_sd_status)
{ {
case 1: case 1:
lcd.setCursor(0, 3); lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING); lcd_printPGM(_T(MSG_HEATING));
break; break;
case 2: case 2:
lcd.setCursor(0, 3); lcd.setCursor(0, 3);
lcd_printPGM(MSG_HEATING_COMPLETE); lcd_printPGM(_T(MSG_HEATING_COMPLETE));
heating_status = 0; heating_status = 0;
heating_status_counter = 0; heating_status_counter = 0;
custom_message = false; custom_message = false;
break; break;
case 3: case 3:
lcd.setCursor(0, 3); lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_HEATING); lcd_printPGM(_T(MSG_BED_HEATING));
break; break;
case 4: case 4:
lcd.setCursor(0, 3); lcd.setCursor(0, 3);
lcd_printPGM(MSG_BED_DONE); lcd_printPGM(_T(MSG_BED_DONE));
heating_status = 0; heating_status = 0;
heating_status_counter = 0; heating_status_counter = 0;
custom_message = false; custom_message = false;
@ -976,8 +976,8 @@ if (print_sd_status)
{ {
if (custom_message_state == 3) if (custom_message_state == 3)
{ {
lcd_printPGM(WELCOME_MSG); lcd_printPGM(_T(WELCOME_MSG));
lcd_setstatuspgm(WELCOME_MSG); lcd_setstatuspgm(_T(WELCOME_MSG));
custom_message = false; custom_message = false;
custom_message_type = 0; custom_message_type = 0;
} }
@ -1012,7 +1012,7 @@ if (print_sd_status)
if (custom_message_type == 4) { if (custom_message_type == 4) {
char progress[4]; char progress[4];
lcd.setCursor(0, 3); lcd.setCursor(0, 3);
lcd_printPGM(MSG_TEMP_CALIBRATION); lcd_printPGM(_T(MSG_TEMP_CALIBRATION));
lcd.setCursor(12, 3); lcd.setCursor(12, 3);
sprintf(progress, "%d/6", custom_message_state); sprintf(progress, "%d/6", custom_message_state);
lcd.print(progress); lcd.print(progress);

96
lang_upgrade/fix_1.out Normal file
View File

@ -0,0 +1,96 @@
MSG_ALL OK
MSG_AUTO_HOME OK
MSG_AUTO_MODE_ON OK
MSG_BABYSTEP_Z OK
MSG_BABYSTEP_Z_NOT_SET OK
MSG_BED OK
MSG_BED_DONE OK
MSG_BED_HEATING OK
MSG_BED_LEVELING_FAILED_POINT_LOW OK
MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED OK
MSG_CALIBRATE_Z_AUTO OK
MSG_CARD_MENU OK
MSG_CONFIRM_NOZZLE_CLEAN OK
MSG_COOLDOWN OK
MSG_CRASH_DETECTED OK
MSG_CRASHDETECT_NA OK
MSG_CRASHDETECT_OFF OK
MSG_CRASHDETECT_ON OK
MSG_ENDSTOP_HIT OK
MSG_ENDSTOP_OPEN OK
MSG_ENDSTOPS_HIT OK
MSG_Enqueing OK
MSG_ERR_STOPPED OK
MSG_ERROR OK
MSG_EXTRUDER OK
MSG_FAN_SPEED OK
MSG_FILAMENT_CLEAN OK
MSG_FILAMENT_LOADING_T0 OK
MSG_FILAMENT_LOADING_T1 OK
MSG_FILAMENT_LOADING_T2 OK
MSG_FILAMENT_LOADING_T3 OK
MSG_FILAMENTCHANGE OK
MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 OK
MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 OK
MSG_FINISHING_MOVEMENTS OK
MSG_FOLLOW_CALIBRATION_FLOW OK
MSG_FSENS_AUTOLOAD_NA OK
MSG_FSENSOR_OFF OK
MSG_FSENSOR_ON OK
MSG_HEATING OK
MSG_HEATING_COMPLETE OK
MSG_HOMEYZ OK
MSG_CHOOSE_EXTRUDER OK
MSG_LOAD_FILAMENT OK
MSG_LOADING_FILAMENT OK
MSG_M117_V2_CALIBRATION OK
MSG_MAIN OK
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 OK
MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 OK
MSG_MENU_CALIBRATION OK
MSG_NO OK
MSG_NOZZLE OK
MSG_OK OK
MSG_PAPER OK
MSG_PLACE_STEEL_SHEET OK
MSG_PLEASE_WAIT OK
MSG_POWERUP OK
MSG_PREHEAT_NOZZLE OK
MSG_PRESS_TO_UNLOAD OK
MSG_PRINT_ABORTED OK
MSG_PULL_OUT_FILAMENT OK
MSG_RECOVER_PRINT OK
MSG_REFRESH OK
MSG_REMOVE_STEEL_SHEET OK
MSG_SD_ERR_WRITE_TO_FILE OK
MSG_SD_OPEN_FILE_FAIL OK
MSG_SD_WORKDIR_FAIL OK
MSG_SELFTEST_COOLING_FAN OK
MSG_SELFTEST_EXTRUDER_FAN OK
MSG_SELFTEST_FAILED OK
MSG_SELFTEST_FAN OK
MSG_SELFTEST_FAN_NO OK
MSG_SELFTEST_FAN_YES OK
MSG_SELFTEST_CHECK_BED OK
MSG_SELFTEST_CHECK_FSENSOR OK
MSG_SELFTEST_MOTOR OK
MSG_SELFTEST_WIRINGERROR OK
MSG_SETTINGS OK
MSG_SILENT_MODE_OFF OK
MSG_SILENT_MODE_ON OK
MSG_STEALTH_MODE_OFF OK
MSG_STEALTH_MODE_ON OK
MSG_STEEL_SHEET_CHECK OK
MSG_STOP_PRINT OK
MSG_STOPPED OK
MSG_TEMP_CALIBRATION OK
MSG_TEMP_CALIBRATION_DONE OK
MSG_UNLOAD_FILAMENT OK
MSG_UNLOADING_FILAMENT OK
MSG_WATCH OK
MSG_WIZARD_CALIBRATION_FAILED OK
MSG_WIZARD_DONE OK
MSG_WIZARD_HEATING OK
MSG_WIZARD_QUIT OK
MSG_YES OK
WELCOME_MSG OK

33
lang_upgrade/fix_source_1.sh Normal file
View File

@ -0,0 +1,33 @@
#!/bin/sh
# fix_source_1.sh - replace in code all usage of localized message constant from messages.h as _T(MSG_xxx)
if [ -e ./source ]; then
echo 'folder ./source already exists.'
read
exit
fi
#create target folder
echo 'creating target folder...'
mkdir ./source
#list all source files except *language* and *messages*
files=$(ls ../Firmware/*.c* | grep -v 'language' | grep -v 'messages'; ls ../Firmware/*.h | grep -v 'language' | grep -v 'messages' )
echo 'copying files...'
cp $files ./source/
#list all source files in target folder
files=$(ls ./source/*.c*; ls ./source/*.h )
#replace source - internatinalized messages used once with _i("TEXT")
echo 'processing msgs_en_used_once.txt'
cat msgs_en_used_more.txt | sed "s/\\\\/\\\\\\\\/g;s/\//\\\\\\\\\//g" | while read name cols rows text; do
if sed -i -E "s/\b$name\b/_T\($name\)/g" $files; then
echo "$name OK"
else
echo "$name NG!"
fi
done | tee fix_1.out
echo "fix1 finished... press key"
read
exit