messages translated, invalidate calibration status at the beginning of temp. calibration
This commit is contained in:
PavelSindler
parent
397039270a
commit
32df4f68a1
8 changed files with 194 additions and 115 deletions
|
|
@ -2828,11 +2828,12 @@ void process_commands()
|
|||
current_position[Z_AXIS] = PINDA_PREHEAT_Z;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
|
||||
|
||||
while (abs(degBed() - PINDA_MIN_T) > 1 ) delay_keep_alive(1000);
|
||||
|
||||
//enquecommand_P(PSTR("M190 S50"));
|
||||
for (int i = 0; i < PINDA_HEAT_T; i++) delay_keep_alive(1000);
|
||||
calibration_status_store(CALIBRATION_STATUS_PINDA); //invalidate temp. calibration in case that in will be aborted during the calibration process
|
||||
|
||||
current_position[Z_AXIS] = 5;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
|
||||
|
|
@ -6321,7 +6322,7 @@ void bed_analysis(float x_dimension, float y_dimension, int x_points_num, int y_
|
|||
#endif
|
||||
|
||||
void temp_compensation_start() {
|
||||
mesh_bed_leveling_flag = false;
|
||||
|
||||
custom_message = true;
|
||||
custom_message_type = 5;
|
||||
custom_message_state = PINDA_HEAT_T + 1;
|
||||
|
|
@ -6341,8 +6342,7 @@ void temp_compensation_start() {
|
|||
custom_message_state = PINDA_HEAT_T - i;
|
||||
if (custom_message_state == 99 || custom_message_state == 9) lcd_update(2); //force whole display redraw if number of digits changed
|
||||
else lcd_update(1);
|
||||
}
|
||||
mesh_bed_leveling_flag = true;
|
||||
}
|
||||
custom_message_type = 0;
|
||||
custom_message_state = 0;
|
||||
custom_message = false;
|
||||
|
|
|
|||
|
|
@ -496,24 +496,32 @@ const char * const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
|
||||
const char MSG_CALIBRATE_PINDA_EN[] PROGMEM = "Calibrate";
|
||||
const char MSG_CALIBRATE_PINDA_CZ[] PROGMEM = "Zkalibrovat";
|
||||
const char MSG_CALIBRATE_PINDA_IT[] PROGMEM = "Calibrare";
|
||||
const char MSG_CALIBRATE_PINDA_ES[] PROGMEM = "Calibrar";
|
||||
const char MSG_CALIBRATE_PINDA_PL[] PROGMEM = "Skalibrowac";
|
||||
const char MSG_CALIBRATE_PINDA_DE[] PROGMEM = "Kalibrieren";
|
||||
const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_CALIBRATE_PINDA_EN,
|
||||
MSG_CALIBRATE_PINDA_CZ,
|
||||
MSG_CALIBRATE_PINDA_EN,
|
||||
MSG_CALIBRATE_PINDA_EN,
|
||||
MSG_CALIBRATE_PINDA_EN,
|
||||
MSG_CALIBRATE_PINDA_EN
|
||||
MSG_CALIBRATE_PINDA_IT,
|
||||
MSG_CALIBRATE_PINDA_ES,
|
||||
MSG_CALIBRATE_PINDA_PL,
|
||||
MSG_CALIBRATE_PINDA_DE
|
||||
};
|
||||
|
||||
const char MSG_CALIBRATION_PINDA_MENU_EN[] PROGMEM = "Temp. calibration";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplotni kalibrace";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_CZ[] PROGMEM = "Teplot. kalibrace";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_IT[] PROGMEM = "Taratura temp.";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_ES[] PROGMEM = "Calibracion temp.";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_PL[] PROGMEM = "Cieplna kalibr.";
|
||||
const char MSG_CALIBRATION_PINDA_MENU_DE[] PROGMEM = "Temp. kalibrieren";
|
||||
const char * const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_CALIBRATION_PINDA_MENU_EN,
|
||||
MSG_CALIBRATION_PINDA_MENU_CZ,
|
||||
MSG_CALIBRATION_PINDA_MENU_EN,
|
||||
MSG_CALIBRATION_PINDA_MENU_EN,
|
||||
MSG_CALIBRATION_PINDA_MENU_EN,
|
||||
MSG_CALIBRATION_PINDA_MENU_EN
|
||||
MSG_CALIBRATION_PINDA_MENU_IT,
|
||||
MSG_CALIBRATION_PINDA_MENU_ES,
|
||||
MSG_CALIBRATION_PINDA_MENU_PL,
|
||||
MSG_CALIBRATION_PINDA_MENU_DE
|
||||
};
|
||||
|
||||
const char MSG_CARD_MENU_EN[] PROGMEM = "Print from SD";
|
||||
|
|
@ -958,38 +966,15 @@ const char * const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_FIL_ADJUSTING_DE
|
||||
};
|
||||
|
||||
const char MSG_FIL_LOADED_CHECK_EN[] PROGMEM = "Is filament loaded?";
|
||||
const char MSG_FIL_LOADED_CHECK_CZ[] PROGMEM = "Je filament zaveden?";
|
||||
const char MSG_FIL_LOADED_CHECK_IT[] PROGMEM = "Filamento caricato?";
|
||||
const char MSG_FIL_LOADED_CHECK_ES[] PROGMEM = "Esta cargado el filamento?";
|
||||
const char MSG_FIL_LOADED_CHECK_PL[] PROGMEM = "Czy filament jest wprowadzony?";
|
||||
const char MSG_FIL_LOADED_CHECK_DE[] PROGMEM = "Filament eingelegt?";
|
||||
const char * const MSG_FIL_LOADED_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_FIL_LOADED_CHECK_EN,
|
||||
MSG_FIL_LOADED_CHECK_CZ,
|
||||
MSG_FIL_LOADED_CHECK_IT,
|
||||
MSG_FIL_LOADED_CHECK_ES,
|
||||
MSG_FIL_LOADED_CHECK_PL,
|
||||
MSG_FIL_LOADED_CHECK_DE
|
||||
};
|
||||
|
||||
const char MSG_FIL_TUNING_EN[] PROGMEM = "Rotate the knob to adjust filament.";
|
||||
const char MSG_FIL_TUNING_CZ[] PROGMEM = "Otacenim tlacitka doladte pozici filamentu.";
|
||||
const char MSG_FIL_TUNING_IT[] PROGMEM = "Girare la manopola per regolare il filamento";
|
||||
const char MSG_FIL_TUNING_ES[] PROGMEM = "Rotar el mando para ajustar el filamento.";
|
||||
const char MSG_FIL_TUNING_PL[] PROGMEM = "Obrotem przycisku dostroj pozycje filamentu.";
|
||||
const char MSG_FIL_TUNING_DE[] PROGMEM = "Knopf drehen um Filam. einzustellen.";
|
||||
const char * const MSG_FIL_TUNING_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_FIL_TUNING_EN,
|
||||
MSG_FIL_TUNING_CZ,
|
||||
MSG_FIL_TUNING_IT,
|
||||
MSG_FIL_TUNING_ES,
|
||||
MSG_FIL_TUNING_PL,
|
||||
MSG_FIL_TUNING_DE
|
||||
};
|
||||
|
||||
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN[] PROGMEM = "Iteration ";
|
||||
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[1] PROGMEM = {
|
||||
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ[] PROGMEM = "Iterace ";
|
||||
const char MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES[] PROGMEM = "Iteracion ";
|
||||
const char * const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_CZ,
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_ES,
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN,
|
||||
MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_EN
|
||||
};
|
||||
|
||||
|
|
@ -1025,13 +1010,17 @@ const char * const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM] PROGM
|
|||
|
||||
const char MSG_FINISHING_MOVEMENTS_EN[] PROGMEM = "Finishing movements";
|
||||
const char MSG_FINISHING_MOVEMENTS_CZ[] PROGMEM = "Dokoncovani pohybu";
|
||||
const char MSG_FINISHING_MOVEMENTS_IT[] PROGMEM = "Arresto in corso";
|
||||
const char MSG_FINISHING_MOVEMENTS_ES[] PROGMEM = "Term. movimientos";
|
||||
const char MSG_FINISHING_MOVEMENTS_PL[] PROGMEM = "Konczenie druku";
|
||||
const char MSG_FINISHING_MOVEMENTS_DE[] PROGMEM = "Bewegung beenden";
|
||||
const char * const MSG_FINISHING_MOVEMENTS_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_FINISHING_MOVEMENTS_EN,
|
||||
MSG_FINISHING_MOVEMENTS_CZ,
|
||||
MSG_FINISHING_MOVEMENTS_EN,
|
||||
MSG_FINISHING_MOVEMENTS_EN,
|
||||
MSG_FINISHING_MOVEMENTS_EN,
|
||||
MSG_FINISHING_MOVEMENTS_EN
|
||||
MSG_FINISHING_MOVEMENTS_IT,
|
||||
MSG_FINISHING_MOVEMENTS_ES,
|
||||
MSG_FINISHING_MOVEMENTS_PL,
|
||||
MSG_FINISHING_MOVEMENTS_DE
|
||||
};
|
||||
|
||||
const char MSG_FLOW_EN[] PROGMEM = "Flow";
|
||||
|
|
@ -1771,57 +1760,77 @@ const char * const MSG_PICK_Z_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
|
||||
const char MSG_PID_EXTRUDER_EN[] PROGMEM = "PID calibration";
|
||||
const char MSG_PID_EXTRUDER_CZ[] PROGMEM = "PID kalibrace";
|
||||
const char MSG_PID_EXTRUDER_IT[] PROGMEM = "Calibrazione PID";
|
||||
const char MSG_PID_EXTRUDER_ES[] PROGMEM = "Calibracion PID";
|
||||
const char MSG_PID_EXTRUDER_PL[] PROGMEM = "Kalibracja PID";
|
||||
const char MSG_PID_EXTRUDER_DE[] PROGMEM = "PID Kalibrierung";
|
||||
const char * const MSG_PID_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PID_EXTRUDER_EN,
|
||||
MSG_PID_EXTRUDER_CZ,
|
||||
MSG_PID_EXTRUDER_EN,
|
||||
MSG_PID_EXTRUDER_EN,
|
||||
MSG_PID_EXTRUDER_EN,
|
||||
MSG_PID_EXTRUDER_EN
|
||||
MSG_PID_EXTRUDER_IT,
|
||||
MSG_PID_EXTRUDER_ES,
|
||||
MSG_PID_EXTRUDER_PL,
|
||||
MSG_PID_EXTRUDER_DE
|
||||
};
|
||||
|
||||
const char MSG_PID_FINISHED_EN[] PROGMEM = "PID cal. finished";
|
||||
const char MSG_PID_FINISHED_CZ[] PROGMEM = "PID kal. ukoncena";
|
||||
const char MSG_PID_FINISHED_IT[] PROGMEM = "Cal. PID completa";
|
||||
const char MSG_PID_FINISHED_ES[] PROGMEM = "Cal. PID terminada";
|
||||
const char MSG_PID_FINISHED_PL[] PROGMEM = "Kal. PID zakonczona";
|
||||
const char MSG_PID_FINISHED_DE[] PROGMEM = "PID Kalib. fertig";
|
||||
const char * const MSG_PID_FINISHED_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PID_FINISHED_EN,
|
||||
MSG_PID_FINISHED_CZ,
|
||||
MSG_PID_FINISHED_EN,
|
||||
MSG_PID_FINISHED_EN,
|
||||
MSG_PID_FINISHED_EN,
|
||||
MSG_PID_FINISHED_EN
|
||||
MSG_PID_FINISHED_IT,
|
||||
MSG_PID_FINISHED_ES,
|
||||
MSG_PID_FINISHED_PL,
|
||||
MSG_PID_FINISHED_DE
|
||||
};
|
||||
|
||||
const char MSG_PID_RUNNING_EN[] PROGMEM = "PID cal. ";
|
||||
const char MSG_PID_RUNNING_CZ[] PROGMEM = "PID kal. ";
|
||||
const char MSG_PID_RUNNING_IT[] PROGMEM = "Cal. PID";
|
||||
const char MSG_PID_RUNNING_ES[] PROGMEM = "Cal. PID ";
|
||||
const char MSG_PID_RUNNING_PL[] PROGMEM = "Kal. PID";
|
||||
const char MSG_PID_RUNNING_DE[] PROGMEM = "PID Kalib.";
|
||||
const char * const MSG_PID_RUNNING_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PID_RUNNING_EN,
|
||||
MSG_PID_RUNNING_CZ,
|
||||
MSG_PID_RUNNING_EN,
|
||||
MSG_PID_RUNNING_EN,
|
||||
MSG_PID_RUNNING_EN,
|
||||
MSG_PID_RUNNING_EN
|
||||
MSG_PID_RUNNING_IT,
|
||||
MSG_PID_RUNNING_ES,
|
||||
MSG_PID_RUNNING_PL,
|
||||
MSG_PID_RUNNING_DE
|
||||
};
|
||||
|
||||
const char MSG_PINDA_NOT_CALIBRATED_EN[] PROGMEM = "Temperature calibration has not been run yet";
|
||||
const char MSG_PINDA_NOT_CALIBRATED_CZ[] PROGMEM = "Tiskarna nebyla teplotne zkalibrovana";
|
||||
const char MSG_PINDA_NOT_CALIBRATED_IT[] PROGMEM = "Taratura della temperatura non ancora eseguita";
|
||||
const char MSG_PINDA_NOT_CALIBRATED_ES[] PROGMEM = "La temperatura de calibracion no ha sido ajustada";
|
||||
const char MSG_PINDA_NOT_CALIBRATED_PL[] PROGMEM = "Cieplna kalibracja nie byla przeprowadzona";
|
||||
const char MSG_PINDA_NOT_CALIBRATED_DE[] PROGMEM = "Temperatur wurde nicht kalibriert";
|
||||
const char * const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PINDA_NOT_CALIBRATED_EN,
|
||||
MSG_PINDA_NOT_CALIBRATED_CZ,
|
||||
MSG_PINDA_NOT_CALIBRATED_EN,
|
||||
MSG_PINDA_NOT_CALIBRATED_EN,
|
||||
MSG_PINDA_NOT_CALIBRATED_EN,
|
||||
MSG_PINDA_NOT_CALIBRATED_EN
|
||||
MSG_PINDA_NOT_CALIBRATED_IT,
|
||||
MSG_PINDA_NOT_CALIBRATED_ES,
|
||||
MSG_PINDA_NOT_CALIBRATED_PL,
|
||||
MSG_PINDA_NOT_CALIBRATED_DE
|
||||
};
|
||||
|
||||
const char MSG_PINDA_PREHEAT_EN[] PROGMEM = "PINDA Heating";
|
||||
const char MSG_PINDA_PREHEAT_CZ[] PROGMEM = "Nahrivani PINDA";
|
||||
const char MSG_PINDA_PREHEAT_IT[] PROGMEM = "Riscald. PINDA";
|
||||
const char MSG_PINDA_PREHEAT_ES[] PROGMEM = "Calentando PINDA";
|
||||
const char MSG_PINDA_PREHEAT_PL[] PROGMEM = "Grzanie PINDA";
|
||||
const char MSG_PINDA_PREHEAT_DE[] PROGMEM = "PINDA erwaermen";
|
||||
const char * const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PINDA_PREHEAT_EN,
|
||||
MSG_PINDA_PREHEAT_CZ,
|
||||
MSG_PINDA_PREHEAT_EN,
|
||||
MSG_PINDA_PREHEAT_EN,
|
||||
MSG_PINDA_PREHEAT_EN,
|
||||
MSG_PINDA_PREHEAT_EN
|
||||
MSG_PINDA_PREHEAT_IT,
|
||||
MSG_PINDA_PREHEAT_ES,
|
||||
MSG_PINDA_PREHEAT_PL,
|
||||
MSG_PINDA_PREHEAT_DE
|
||||
};
|
||||
|
||||
const char MSG_PLANNER_BUFFER_BYTES_EN[] PROGMEM = " PlannerBufferBytes: ";
|
||||
|
|
@ -1921,13 +1930,17 @@ const char * const MSG_PRINT_ABORTED_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
|
||||
const char MSG_PRINT_PAUSED_EN[] PROGMEM = "Print paused";
|
||||
const char MSG_PRINT_PAUSED_CZ[] PROGMEM = "Tisk pozastaven";
|
||||
const char MSG_PRINT_PAUSED_IT[] PROGMEM = "Stampa in pausa";
|
||||
const char MSG_PRINT_PAUSED_ES[] PROGMEM = "Impresion en pausa";
|
||||
const char MSG_PRINT_PAUSED_PL[] PROGMEM = "Druk zatrzymany";
|
||||
const char MSG_PRINT_PAUSED_DE[] PROGMEM = "Druck pausiert";
|
||||
const char * const MSG_PRINT_PAUSED_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PRINT_PAUSED_EN,
|
||||
MSG_PRINT_PAUSED_CZ,
|
||||
MSG_PRINT_PAUSED_EN,
|
||||
MSG_PRINT_PAUSED_EN,
|
||||
MSG_PRINT_PAUSED_EN,
|
||||
MSG_PRINT_PAUSED_EN
|
||||
MSG_PRINT_PAUSED_IT,
|
||||
MSG_PRINT_PAUSED_ES,
|
||||
MSG_PRINT_PAUSED_PL,
|
||||
MSG_PRINT_PAUSED_DE
|
||||
};
|
||||
|
||||
const char MSG_PRUSA3D_EN[] PROGMEM = "prusa3d.com";
|
||||
|
|
@ -2038,13 +2051,17 @@ const char * const MSG_RESUMING_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
|
||||
const char MSG_RESUMING_PRINT_EN[] PROGMEM = "Resuming print";
|
||||
const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
|
||||
const char MSG_RESUMING_PRINT_IT[] PROGMEM = "Stampa in ripresa";
|
||||
const char MSG_RESUMING_PRINT_ES[] PROGMEM = "Reanudar impresion";
|
||||
const char MSG_RESUMING_PRINT_PL[] PROGMEM = "Wznawianie druku";
|
||||
const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck weitergehen";
|
||||
const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_RESUMING_PRINT_EN,
|
||||
MSG_RESUMING_PRINT_CZ,
|
||||
MSG_RESUMING_PRINT_EN,
|
||||
MSG_RESUMING_PRINT_EN,
|
||||
MSG_RESUMING_PRINT_EN,
|
||||
MSG_RESUMING_PRINT_EN
|
||||
MSG_RESUMING_PRINT_IT,
|
||||
MSG_RESUMING_PRINT_ES,
|
||||
MSG_RESUMING_PRINT_PL,
|
||||
MSG_RESUMING_PRINT_DE
|
||||
};
|
||||
|
||||
const char MSG_SD_CANT_ENTER_SUBDIR_EN[] PROGMEM = "Cannot enter subdir: ";
|
||||
|
|
@ -2548,13 +2565,17 @@ const char * const MSG_SET_ORIGIN_LANG_TABLE[1] PROGMEM = {
|
|||
|
||||
const char MSG_SET_TEMPERATURE_EN[] PROGMEM = "Set temperature:";
|
||||
const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
|
||||
const char MSG_SET_TEMPERATURE_IT[] PROGMEM = "Imposta temperatura";
|
||||
const char MSG_SET_TEMPERATURE_ES[] PROGMEM = "Establecer temp.:";
|
||||
const char MSG_SET_TEMPERATURE_PL[] PROGMEM = "Ustawic temperature";
|
||||
const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp. einsetzen";
|
||||
const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_SET_TEMPERATURE_EN,
|
||||
MSG_SET_TEMPERATURE_CZ,
|
||||
MSG_SET_TEMPERATURE_EN,
|
||||
MSG_SET_TEMPERATURE_EN,
|
||||
MSG_SET_TEMPERATURE_EN,
|
||||
MSG_SET_TEMPERATURE_EN
|
||||
MSG_SET_TEMPERATURE_IT,
|
||||
MSG_SET_TEMPERATURE_ES,
|
||||
MSG_SET_TEMPERATURE_PL,
|
||||
MSG_SET_TEMPERATURE_DE
|
||||
};
|
||||
|
||||
const char MSG_SHOW_END_STOPS_EN[] PROGMEM = "Show end stops";
|
||||
|
|
@ -2811,46 +2832,62 @@ const char * const MSG_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
|
||||
const char MSG_TEMP_CALIBRATION_EN[] PROGMEM = "Temp. cal. ";
|
||||
const char MSG_TEMP_CALIBRATION_CZ[] PROGMEM = "Tepl. kal. ";
|
||||
const char MSG_TEMP_CALIBRATION_IT[] PROGMEM = "Cal. temp. ";
|
||||
const char MSG_TEMP_CALIBRATION_ES[] PROGMEM = "Cal. temp. ";
|
||||
const char MSG_TEMP_CALIBRATION_PL[] PROGMEM = "Ciepl. kal. ";
|
||||
const char MSG_TEMP_CALIBRATION_DE[] PROGMEM = "Temp Kalib. ";
|
||||
const char * const MSG_TEMP_CALIBRATION_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_TEMP_CALIBRATION_EN,
|
||||
MSG_TEMP_CALIBRATION_CZ,
|
||||
MSG_TEMP_CALIBRATION_EN,
|
||||
MSG_TEMP_CALIBRATION_EN,
|
||||
MSG_TEMP_CALIBRATION_EN,
|
||||
MSG_TEMP_CALIBRATION_EN
|
||||
MSG_TEMP_CALIBRATION_IT,
|
||||
MSG_TEMP_CALIBRATION_ES,
|
||||
MSG_TEMP_CALIBRATION_PL,
|
||||
MSG_TEMP_CALIBRATION_DE
|
||||
};
|
||||
|
||||
const char MSG_TEMP_CALIBRATION_DONE_EN[] PROGMEM = "Temperature calibration is finished. Click to continue.";
|
||||
const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka.";
|
||||
const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
|
||||
const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
|
||||
const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
|
||||
const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp. Kalibrierung fertig. Klicken um weiter zu gehen.";
|
||||
const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_TEMP_CALIBRATION_DONE_EN,
|
||||
MSG_TEMP_CALIBRATION_DONE_CZ,
|
||||
MSG_TEMP_CALIBRATION_DONE_EN,
|
||||
MSG_TEMP_CALIBRATION_DONE_EN,
|
||||
MSG_TEMP_CALIBRATION_DONE_EN,
|
||||
MSG_TEMP_CALIBRATION_DONE_EN
|
||||
MSG_TEMP_CALIBRATION_DONE_IT,
|
||||
MSG_TEMP_CALIBRATION_DONE_ES,
|
||||
MSG_TEMP_CALIBRATION_DONE_PL,
|
||||
MSG_TEMP_CALIBRATION_DONE_DE
|
||||
};
|
||||
|
||||
const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "Temp. cal. [OFF]";
|
||||
const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
|
||||
const char MSG_TEMP_CALIBRATION_OFF_IT[] PROGMEM = "Cal. temp. [OFF]";
|
||||
const char MSG_TEMP_CALIBRATION_OFF_ES[] PROGMEM = "Cal. temp. [OFF]";
|
||||
const char MSG_TEMP_CALIBRATION_OFF_PL[] PROGMEM = "Ciepl. kal. [OFF]";
|
||||
const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "Temp. Kal. [OFF]";
|
||||
const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_TEMP_CALIBRATION_OFF_EN,
|
||||
MSG_TEMP_CALIBRATION_OFF_CZ,
|
||||
MSG_TEMP_CALIBRATION_OFF_EN,
|
||||
MSG_TEMP_CALIBRATION_OFF_EN,
|
||||
MSG_TEMP_CALIBRATION_OFF_EN,
|
||||
MSG_TEMP_CALIBRATION_OFF_EN
|
||||
MSG_TEMP_CALIBRATION_OFF_IT,
|
||||
MSG_TEMP_CALIBRATION_OFF_ES,
|
||||
MSG_TEMP_CALIBRATION_OFF_PL,
|
||||
MSG_TEMP_CALIBRATION_OFF_DE
|
||||
};
|
||||
|
||||
const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "Temp. cal. [ON]";
|
||||
const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
|
||||
const char MSG_TEMP_CALIBRATION_ON_IT[] PROGMEM = "Cal. temp. [ON]";
|
||||
const char MSG_TEMP_CALIBRATION_ON_ES[] PROGMEM = "Cal. temp. [ON]";
|
||||
const char MSG_TEMP_CALIBRATION_ON_PL[] PROGMEM = "Ciepl. kal. [ON]";
|
||||
const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "Temp. Kal. [ON]";
|
||||
const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_TEMP_CALIBRATION_ON_EN,
|
||||
MSG_TEMP_CALIBRATION_ON_CZ,
|
||||
MSG_TEMP_CALIBRATION_ON_EN,
|
||||
MSG_TEMP_CALIBRATION_ON_EN,
|
||||
MSG_TEMP_CALIBRATION_ON_EN,
|
||||
MSG_TEMP_CALIBRATION_ON_EN
|
||||
MSG_TEMP_CALIBRATION_ON_IT,
|
||||
MSG_TEMP_CALIBRATION_ON_ES,
|
||||
MSG_TEMP_CALIBRATION_ON_PL,
|
||||
MSG_TEMP_CALIBRATION_ON_DE
|
||||
};
|
||||
|
||||
const char MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF_EN[] PROGMEM = "SD card [normal]";
|
||||
|
|
|
|||
|
|
@ -201,12 +201,8 @@ extern const char* const MSG_FILE_SAVED_LANG_TABLE[1];
|
|||
#define MSG_FILE_SAVED LANG_TABLE_SELECT_EXPLICIT(MSG_FILE_SAVED_LANG_TABLE, 0)
|
||||
extern const char* const MSG_FIL_ADJUSTING_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FIL_ADJUSTING LANG_TABLE_SELECT(MSG_FIL_ADJUSTING_LANG_TABLE)
|
||||
extern const char* const MSG_FIL_LOADED_CHECK_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FIL_LOADED_CHECK LANG_TABLE_SELECT(MSG_FIL_LOADED_CHECK_LANG_TABLE)
|
||||
extern const char* const MSG_FIL_TUNING_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FIL_TUNING LANG_TABLE_SELECT(MSG_FIL_TUNING_LANG_TABLE)
|
||||
extern const char* const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[1];
|
||||
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION LANG_TABLE_SELECT_EXPLICIT(MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE, 0)
|
||||
extern const char* const MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION LANG_TABLE_SELECT(MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION_LANG_TABLE)
|
||||
extern const char* const MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 LANG_TABLE_SELECT(MSG_FIND_BED_OFFSET_AND_SKEW_LINE1_LANG_TABLE)
|
||||
extern const char* const MSG_FIND_BED_OFFSET_AND_SKEW_LINE2_LANG_TABLE[LANG_NUM];
|
||||
|
|
|
|||
|
|
@ -212,6 +212,7 @@
|
|||
#define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 9"
|
||||
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Merim referencni vysku kalibracniho bodu"
|
||||
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
|
||||
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iterace "
|
||||
|
||||
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
|
||||
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibrace XYZ selhala. Nahlednete do manualu."
|
||||
|
|
@ -252,8 +253,7 @@
|
|||
#define MSG_FILAMENT_LOADING_T2 "Vložte filament do extruderu 3. Potvrdte tlacitkem."
|
||||
#define MSG_FILAMENT_LOADING_T3 "Vložte filament do extruderu 4. Potvrdte tlacitkem."
|
||||
#define MSG_CHANGE_EXTR "Zmenit extruder"
|
||||
#define MSG_FIL_LOADED_CHECK "Je filament zaveden?"
|
||||
#define MSG_FIL_TUNING "Otacenim tlacitka doladte pozici filamentu."
|
||||
|
||||
#define MSG_FIL_ADJUSTING "Probiha srovnani filamentu. Prosim cekejte."
|
||||
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem."
|
||||
#define MSG_CALIBRATE_E "Kalibrovat E"
|
||||
|
|
@ -275,7 +275,7 @@
|
|||
#define MSG_PID_RUNNING "PID kal. "
|
||||
|
||||
#define MSG_CALIBRATE_PINDA "Zkalibrovat"
|
||||
#define MSG_CALIBRATION_PINDA_MENU "Teplotni kalibrace"
|
||||
#define MSG_CALIBRATION_PINDA_MENU "Teplot. kalibrace"
|
||||
#define MSG_PINDA_NOT_CALIBRATED "Tiskarna nebyla teplotne zkalibrovana"
|
||||
#define MSG_PINDA_PREHEAT "Nahrivani PINDA"
|
||||
#define MSG_TEMP_CALIBRATION "Tepl. kal. "
|
||||
|
|
|
|||
|
|
@ -238,8 +238,6 @@
|
|||
#define(length=20, lines=4) MSG_FILAMENT_LOADING_T3 "Insert filament into extruder 4. Click when done."
|
||||
#define(length=20, lines=1) MSG_CHANGE_EXTR "Change extruder"
|
||||
|
||||
#define(length=20, lines=1) MSG_FIL_LOADED_CHECK "Is filament loaded?"
|
||||
#define(length=20, lines=2) MSG_FIL_TUNING "Rotate the knob to adjust filament."
|
||||
#define(length=20, lines=4) MSG_FIL_ADJUSTING "Adjusting filaments. Please wait."
|
||||
#define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
|
||||
#define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten"
|
||||
|
|
|
|||
|
|
@ -206,6 +206,7 @@
|
|||
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Medir la altura del punto de la calibracion"
|
||||
#define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " de 9"
|
||||
|
||||
#define MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteracion "
|
||||
#define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en la cama no encontrados."
|
||||
#define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consultar el manual por favor."
|
||||
#define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Felicitaciones!"
|
||||
|
|
@ -242,8 +243,7 @@
|
|||
#define MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haga clic una vez terminado."
|
||||
#define MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haga clic una vez terminado."
|
||||
#define MSG_CHANGE_EXTR "Cambiar extrusor."
|
||||
#define MSG_FIL_LOADED_CHECK "Esta cargado el filamento?"
|
||||
#define MSG_FIL_TUNING "Rotar el mando para ajustar el filamento."
|
||||
|
||||
#define MSG_FIL_ADJUSTING "Ajustando filamentos. Esperar por favor."
|
||||
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpie la boquilla para calibracion. Haga clic una vez terminado."
|
||||
#define MSG_CALIBRATE_E "Calibrar E"
|
||||
|
|
@ -253,4 +253,21 @@
|
|||
#define MSG_WAITING_TEMP "Esperando enfriamiento de la cama y del extrusor."
|
||||
#define MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
|
||||
#define MSG_UNLOADING_FILAMENT "Soltando filamento"
|
||||
#define MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
|
||||
#define MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
|
||||
|
||||
#define MSG_FINISHING_MOVEMENTS "Term. movimientos"
|
||||
#define MSG_PRINT_PAUSED "Impresion en pausa"
|
||||
#define MSG_RESUMING_PRINT "Reanudar impresion"
|
||||
#define MSG_PID_EXTRUDER "Calibracion PID"
|
||||
#define MSG_SET_TEMPERATURE "Establecer temp.:"
|
||||
#define MSG_PID_FINISHED "Cal. PID terminada"
|
||||
#define MSG_PID_RUNNING "Cal. PID "
|
||||
|
||||
#define MSG_CALIBRATE_PINDA "Calibrar"
|
||||
#define MSG_CALIBRATION_PINDA_MENU "Calibracion temp."
|
||||
#define MSG_PINDA_NOT_CALIBRATED "La temperatura de calibracion no ha sido ajustada"
|
||||
#define MSG_PINDA_PREHEAT "Calentando PINDA"
|
||||
#define MSG_TEMP_CALIBRATION "Cal. temp. "
|
||||
#define MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Presionar para continuar."
|
||||
#define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
|
||||
#define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
|
||||
|
|
@ -237,8 +237,7 @@
|
|||
#define MSG_FILAMENT_LOADING_T2 "Inserire filamento nell'estrusore 3. Click per continuare."
|
||||
#define MSG_FILAMENT_LOADING_T3 "Inserire filamento nell'estrusore 4. Click per continuare."
|
||||
#define MSG_CHANGE_EXTR "Cambio estrusore."
|
||||
#define MSG_FIL_LOADED_CHECK "Filamento caricato?"
|
||||
#define MSG_FIL_TUNING "Girare la manopola per regolare il filamento"
|
||||
|
||||
#define MSG_FIL_ADJUSTING "Filamento in fase di regolazione. Attendere prego."
|
||||
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
|
||||
#define MSG_CALIBRATE_E "Calibra E"
|
||||
|
|
@ -250,3 +249,19 @@
|
|||
#define MSG_UNLOADING_FILAMENT "Rilasc. filamento"
|
||||
#define MSG_PAPER "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
|
||||
|
||||
#define MSG_FINISHING_MOVEMENTS "Arresto in corso"
|
||||
#define MSG_PRINT_PAUSED "Stampa in pausa"
|
||||
#define MSG_RESUMING_PRINT "Stampa in ripresa"
|
||||
#define MSG_PID_EXTRUDER "Calibrazione PID"
|
||||
#define MSG_SET_TEMPERATURE "Imposta temperatura"
|
||||
#define MSG_PID_FINISHED "Cal. PID completa"
|
||||
#define MSG_PID_RUNNING "Cal. PID"
|
||||
|
||||
#define MSG_CALIBRATE_PINDA "Calibrare"
|
||||
#define MSG_CALIBRATION_PINDA_MENU "Taratura temp."
|
||||
#define MSG_PINDA_NOT_CALIBRATED "Taratura della temperatura non ancora eseguita"
|
||||
#define MSG_PINDA_PREHEAT "Riscald. PINDA"
|
||||
#define MSG_TEMP_CALIBRATION "Cal. temp. "
|
||||
#define MSG_TEMP_CALIBRATION_DONE "Taratura temperatura terminata. Fare click per continuare."
|
||||
#define MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
|
||||
#define MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
|
||||
|
|
@ -248,8 +248,7 @@
|
|||
#define MSG_FILAMENT_LOADING_T2 "Wloz filament do ekstrudera 3. Potwierdz przyciskiem."
|
||||
#define MSG_FILAMENT_LOADING_T3 "Wloz filament do ekstrudera 4. Potwierdz przyciskiem."
|
||||
#define MSG_CHANGE_EXTR "Zmienic ekstruder"
|
||||
#define MSG_FIL_LOADED_CHECK "Czy filament jest wprowadzony?"
|
||||
#define MSG_FIL_TUNING "Obrotem przycisku dostroj pozycje filamentu."
|
||||
|
||||
#define MSG_FIL_ADJUSTING "Przebiega wyrownanie filamentow. Prosze czekac."
|
||||
#define MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem."
|
||||
#define MSG_CALIBRATE_E "Kalibruj E"
|
||||
|
|
@ -259,4 +258,21 @@
|
|||
#define MSG_WAITING_TEMP "Oczekiwanie na wychlodzenie dyszy i podkladki."
|
||||
#define MSG_FILAMENT_CLEAN "Czy kolor jest czysty?"
|
||||
#define MSG_UNLOADING_FILAMENT "Wysuwam filament"
|
||||
#define MSG_PAPER "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
|
||||
#define MSG_PAPER "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
|
||||
|
||||
#define MSG_FINISHING_MOVEMENTS "Konczenie druku"
|
||||
#define MSG_PRINT_PAUSED "Druk zatrzymany"
|
||||
#define MSG_RESUMING_PRINT "Wznawianie druku"
|
||||
#define MSG_PID_EXTRUDER "Kalibracja PID"
|
||||
#define MSG_SET_TEMPERATURE "Ustawic temperature"
|
||||
#define MSG_PID_FINISHED "Kal. PID zakonczona"
|
||||
#define MSG_PID_RUNNING "Kal. PID"
|
||||
|
||||
#define MSG_CALIBRATE_PINDA "Skalibrowac"
|
||||
#define MSG_CALIBRATION_PINDA_MENU "Cieplna kalibr."
|
||||
#define MSG_PINDA_NOT_CALIBRATED "Cieplna kalibracja nie byla przeprowadzona"
|
||||
#define MSG_PINDA_PREHEAT "Grzanie PINDA"
|
||||
#define MSG_TEMP_CALIBRATION "Ciepl. kal. "
|
||||
#define MSG_TEMP_CALIBRATION_DONE "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
|
||||
#define MSG_TEMP_CALIBRATION_ON "Ciepl. kal. [ON]"
|
||||
#define MSG_TEMP_CALIBRATION_OFF "Ciepl. kal. [OFF]"
|
||||
Loading…
Reference in a new issue