3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

No longer disable temperature management in xyzcal

Browse Source 
We already disable the heaters upon entering, and the new temperature
isr doesn't perform any direct movement until we return to the main
loop.

This allows us to remove direct control of the soft_pwm interrupt from
the header, which is dangerous.
This commit is contained in:
Yuri D'Elia 2022-08-23 17:13:54 +02:00
parent 7cd888cd0a
commit 35708a61fe
3 changed files with 20 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Firmware/temperature.cpp
View File

@ -50,6 +50,14 @@
#error "ADC_OVRSAMPL oversampling must match OVERSAMPLENR"
#endif
#ifdef SYSTEM_TIMER_2
#define ENABLE_SOFT_PWM_INTERRUPT() TIMSK2 |= (1<<OCIE2B)
#define DISABLE_SOFT_PWM_INTERRUPT() TIMSK2 &= ~(1<<OCIE2B)
#else //SYSTEM_TIMER_2
#define ENABLE_SOFT_PWM_INTERRUPT() TIMSK0 |= (1<<OCIE0B)
#define DISABLE_SOFT_PWM_INTERRUPT() TIMSK0 &= ~(1<<OCIE0B)
#endif //SYSTEM_TIMER_2
// temperature manager timer configuration
#define TEMP_MGR_INTV 0.27 // seconds, ~3.7Hz
#define TIMER5_PRESCALE 256

14
Firmware/temperature.h
View File

@ -24,20 +24,6 @@
#include "Marlin.h"
#include "config.h"
#ifdef SYSTEM_TIMER_2
#define ENABLE_SOFT_PWM_INTERRUPT() TIMSK2 |= (1<<OCIE2B)
#define DISABLE_SOFT_PWM_INTERRUPT() TIMSK2 &= ~(1<<OCIE2B)
#else //SYSTEM_TIMER_2
#define ENABLE_SOFT_PWM_INTERRUPT() TIMSK0 |= (1<<OCIE0B)
#define DISABLE_SOFT_PWM_INTERRUPT() TIMSK0 &= ~(1<<OCIE0B)
#endif //SYSTEM_TIMER_2
// public functions
void soft_pwm_init(); //initialize the soft pwm isr
void temp_mgr_init(); //initialize the temperature handler

30
Firmware/xyzcal.cpp
View File

@ -138,15 +138,18 @@ pos_mm_t pos_2_mm(float pos){
void xyzcal_meassure_enter(void)
{
DBG(_n("xyzcal_meassure_enter\n"));
// disable heaters and stop motion before we initialize sm4
disable_heater();
DISABLE_SOFT_PWM_INTERRUPT();
#if (defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
DISABLE_FANCHECK_INTERRUPT();
#endif //(defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
st_synchronize();
// disable incompatible interrupts
DISABLE_STEPPER_DRIVER_INTERRUPT();
#ifdef WATCHDOG
wdt_disable();
#endif //WATCHDOG
// setup internal callbacks
sm4_stop_cb = 0;
sm4_update_pos_cb = xyzcal_update_pos;
sm4_calc_delay_cb = xyzcal_calc_delay;
@ -156,20 +159,15 @@ void xyzcal_meassure_leave(void)
{
DBG(_n("xyzcal_meassure_leave\n"));
planner_abort_hard();
ENABLE_SOFT_PWM_INTERRUPT();
#if (defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
ENABLE_FANCHECK_INTERRUPT();
#endif //(defined(FANCHECK) && defined(TACH_1) && (TACH_1 >-1))
ENABLE_STEPPER_DRIVER_INTERRUPT();
// re-enable interrupts
#ifdef WATCHDOG
wdt_enable(WDTO_4S);
#ifdef EMERGENCY_HANDLERS
WDTCSR |= (1 << WDIE);
#endif //EMERGENCY_HANDLERS
#endif //WATCHDOG
sm4_stop_cb = 0;
sm4_update_pos_cb = 0;
sm4_calc_delay_cb = 0;
ENABLE_STEPPER_DRIVER_INTERRUPT();
}
@ -999,13 +997,9 @@ BedSkewOffsetDetectionResultType xyzcal_scan_and_process(){
return ret;
}
BedSkewOffsetDetectionResultType xyzcal_find_bed_induction_sensor_point_xy(void){
BedSkewOffsetDetectionResultType ret = BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND;
//@size=258
BedSkewOffsetDetectionResultType xyzcal_find_bed_induction_sensor_point_xy(void) {
// DBG(_n("xyzcal_find_bed_induction_sensor_point_xy x=%ld y=%ld z=%ld\n"), count_position[X_AXIS], count_position[Y_AXIS], count_position[Z_AXIS]);
st_synchronize();
BedSkewOffsetDetectionResultType ret = BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND;
xyzcal_meassure_enter();
if (xyzcal_searchZ())
ret = xyzcal_scan_and_process();