3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Updated lang_en_nl.txt with newest translations

Browse source
This commit is contained in:
3d-gussner 2019-10-24 16:02:58 +02:00
parent a4211da8f0
commit 3ed694f1e1
1 changed files with 32 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

36
lang/lang_en_nl.txt
View file

@ -178,6 +178,10 @@
"Crash det. [on]" "Crash det. [on]"
"Crashdet. [aan]" "Crashdet. [aan]"
#
"Choose a filament for the First Layer Calibration and select it in the on-screen menu."
"Kies een filament voor de kalibratie van de eerste laag en selecteer deze in het schermmenu."
#MSG_CRASHDETECT_NA #MSG_CRASHDETECT_NA
"Crash det. [N/A]" "Crash det. [N/A]"
"Crashdet. [N/V]" "Crashdet. [N/V]"
@ -482,6 +486,10 @@
"Last print failures" "Last print failures"
"Laatste printfouten" "Laatste printfouten"
#
"If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
"Als u extra staalplaten hebt, kalibreert u hun voorinstellingen in Instellingen - HW Setup - Staalplaten."
# #
"Last print" "Last print"
"Laatste print" "Laatste print"
@ -818,6 +826,18 @@
"Print FAN" "Print FAN"
"Print fan" "Print fan"
#
"Please insert filament into the extruder, then press the knob to load it."
"Steek a.u.b. filament in de extruder en druk op de knop om het te laden."
#
"Please insert filament into the first tube of the MMU, then press the knob to load it."
"Steek a.u.b. filament in de eerste buis van de MMU en druk op de knop om het te laden."
#
"Please load filament first."
"Laad a.u.b. eerst filament."
#MSG_PRUSA3D #MSG_PRUSA3D
"prusa3d.com" "prusa3d.com"
"\x00" "\x00"
@ -918,10 +938,6 @@
"Select nozzle preheat temperature which matches your material." "Select nozzle preheat temperature which matches your material."
"Selecteer de voorverwarmingstemperatuur van de tuit die overeenkomt met uw materiaal." "Selecteer de voorverwarmingstemperatuur van de tuit die overeenkomt met uw materiaal."
#
"Select PLA filament:"
"Selecteer PLA-filament:"
#MSG_SET_TEMPERATURE c=19 r=1 #MSG_SET_TEMPERATURE c=19 r=1
"Set temperature:" "Set temperature:"
"Temp. instellen:" "Temp. instellen:"
@ -1018,6 +1034,10 @@
"Swapped" "Swapped"
"Gewisseld" "Gewisseld"
#
"Select filament:"
"Kies filament:"
#MSG_TEMP_CALIBRATION c=20 r=1 #MSG_TEMP_CALIBRATION c=20 r=1
"Temp. cal. " "Temp. cal. "
"Tempkalibratie " "Tempkalibratie "
@ -1026,6 +1046,10 @@
"Temp. cal. [on]" "Temp. cal. [on]"
"Tempkal. [aan]" "Tempkal. [aan]"
#
"Select temperature which matches your material."
"Selecteer de temperatuur die overeenkomt met uw materiaal."
#MSG_TEMP_CALIBRATION_OFF c=20 r=1 #MSG_TEMP_CALIBRATION_OFF c=20 r=1
"Temp. cal. [off]" "Temp. cal. [off]"
"Tempkal. [uit]" "Tempkal. [uit]"
@ -1206,6 +1230,10 @@
"Y distance from min" "Y distance from min"
"Y afstand van min" "Y afstand van min"
#
"The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
"\x00"
# #
"Y-correct:" "Y-correct:"
"Y-correctie:" "Y-correctie:"