MK2-25-3 variant files
This commit is contained in:
Robert Pelnar
parent
2f98ac989a
commit
3ff5686336
@ -2,25 +2,24 @@
|
||||
#define CONFIGURATION_PRUSA_H
|
||||
|
||||
/*------------------------------------
|
||||
GENERAL SETTINGS
|
||||
*------------------------------------*/
|
||||
GENERAL SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Printer revision
|
||||
#define PRINTER_TYPE PRINTER_MK2
|
||||
#define FILAMENT_SIZE "1_75mm_MK2"
|
||||
#define PRINTER_TYPE PRINTER_MK3
|
||||
#define FILAMENT_SIZE "1_75mm_MK3"
|
||||
#define NOZZLE_TYPE "E3Dv6full"
|
||||
|
||||
// Developer flag
|
||||
#define DEVELOPER
|
||||
|
||||
// Printer name
|
||||
#define CUSTOM_MENDEL_NAME "Prusa i3 MK2"
|
||||
#define CUSTOM_MENDEL_NAME "Prusa i3 MK3"
|
||||
|
||||
// Electronics
|
||||
#define MOTHERBOARD BOARD_RAMBO_MINI_1_3
|
||||
#define MOTHERBOARD BOARD_EINSY_1_0a
|
||||
#define HAS_SECOND_SERIAL_PORT
|
||||
|
||||
// Prusa Single extruder multiple material suport
|
||||
//#define SNMM
|
||||
|
||||
// Uncomment the below for the E3D PT100 temperature sensor (with or without PT100 Amplifier)
|
||||
//#define E3D_PT100_EXTRUDER_WITH_AMP
|
||||
@ -30,16 +29,13 @@ GENERAL SETTINGS
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
AXIS SETTINGS
|
||||
*------------------------------------*/
|
||||
AXIS SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Steps per unit {X,Y,Z,E}
|
||||
#ifdef SNMM
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,140}
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,161.3}
|
||||
#endif
|
||||
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,140}
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,280}
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,560}
|
||||
|
||||
// Endstop inverting
|
||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
@ -47,24 +43,23 @@ const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
|
||||
// Direction inverting
|
||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
||||
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
|
||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
|
||||
// Home position
|
||||
#define MANUAL_X_HOME_POS 0
|
||||
#define MANUAL_Y_HOME_POS -2.2
|
||||
#define MANUAL_Z_HOME_POS 0.15
|
||||
#define MANUAL_Z_HOME_POS 0.2
|
||||
|
||||
// Travel limits after homing
|
||||
#define X_MAX_POS 250
|
||||
#define X_MAX_POS 255
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MAX_POS 210
|
||||
#define Y_MIN_POS -2.2
|
||||
#define Y_MIN_POS -4 //orig -4
|
||||
#define Z_MAX_POS 210
|
||||
#define Z_MIN_POS 0.15
|
||||
|
||||
@ -78,22 +73,182 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
#define Z_PAUSE_LIFT 20
|
||||
|
||||
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
||||
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min)
|
||||
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
|
||||
|
||||
#define DEFAULT_MAX_FEEDRATE {500, 500, 12, 120} // (mm/sec)
|
||||
#define DEFAULT_MAX_ACCELERATION {9000,9000,500,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
|
||||
|
||||
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
|
||||
#define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
|
||||
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)
|
||||
|
||||
|
||||
#define MANUAL_FEEDRATE {3000, 3000, 1000, 100} // set the speeds for manual moves (mm/min)
|
||||
#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1250 // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
|
||||
|
||||
#define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
|
||||
|
||||
//Silent mode limits
|
||||
#define SILENT_MAX_ACCEL 960 // max axxeleration in silent mode in mm/s^2
|
||||
#define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define SILENT_MAX_FEEDRATE 172 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//Normal mode limits
|
||||
#define NORMAL_MAX_ACCEL 2500 // Y-axis max axxeleration in normal mode in mm/s^2
|
||||
#define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define NORMAL_MAX_FEEDRATE 200 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//#define SIMPLE_ACCEL_LIMIT //new limitation method for normal/silent
|
||||
|
||||
//number of bytes from end of the file to start check
|
||||
#define END_FILE_SECTION 10000
|
||||
|
||||
#define Z_AXIS_ALWAYS_ON 1
|
||||
|
||||
// Automatic recovery after crash is detected
|
||||
#define AUTOMATIC_RECOVERY_AFTER_CRASH
|
||||
|
||||
// New XYZ calibration
|
||||
#define NEW_XYZCAL
|
||||
|
||||
// Watchdog support
|
||||
#define WATCHDOG
|
||||
|
||||
// Power panic
|
||||
#define UVLO_SUPPORT
|
||||
|
||||
// Fan check
|
||||
#define FANCHECK
|
||||
|
||||
// Safety timer
|
||||
#define SAFETYTIMER
|
||||
|
||||
// Filament sensor
|
||||
#define PAT9125
|
||||
|
||||
|
||||
// Disable some commands
|
||||
#define _DISABLE_M42_M226
|
||||
|
||||
// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
|
||||
// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
|
||||
// temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
|
||||
// the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
|
||||
#define MINTEMP_MINAMBIENT 25
|
||||
#define MINTEMP_MINAMBIENT_RAW 978
|
||||
|
||||
//#define DEBUG_BUILD
|
||||
#ifdef DEBUG_BUILD
|
||||
//#define _NO_ASM
|
||||
#define DEBUG_DCODES //D codes
|
||||
#define DEBUG_STACK_MONITOR //Stack monitor in stepper ISR
|
||||
//#define DEBUG_FSENSOR_LOG //Reports fsensor status to serial
|
||||
//#define DEBUG_CRASHDET_COUNTERS //Display crash-detection counters on LCD
|
||||
//#define DEBUG_RESUME_PRINT //Resume/save print debug enable
|
||||
//#define DEBUG_UVLO_AUTOMATIC_RECOVER // Power panic automatic recovery debug output
|
||||
//#define DEBUG_DISABLE_XMINLIMIT //x min limit ignored
|
||||
//#define DEBUG_DISABLE_XMAXLIMIT //x max limit ignored
|
||||
//#define DEBUG_DISABLE_YMINLIMIT //y min limit ignored
|
||||
//#define DEBUG_DISABLE_YMAXLIMIT //y max limit ignored
|
||||
//#define DEBUG_DISABLE_ZMINLIMIT //z min limit ignored
|
||||
//#define DEBUG_DISABLE_ZMAXLIMIT //z max limit ignored
|
||||
#define DEBUG_DISABLE_STARTMSGS //no startup messages
|
||||
//#define DEBUG_DISABLE_MINTEMP //mintemp error ignored
|
||||
//#define DEBUG_DISABLE_SWLIMITS //sw limits ignored
|
||||
//#define DEBUG_DISABLE_LCD_STATUS_LINE //empty four lcd line
|
||||
//#define DEBUG_DISABLE_PREVENT_EXTRUDER //cold extrusion and long extrusion allowed
|
||||
//#define DEBUG_DISABLE_PRUSA_STATISTICS //disable prusa_statistics() mesages
|
||||
//#define DEBUG_XSTEP_DUP_PIN 21 //duplicate x-step output to pin 21 (SCL on P3)
|
||||
//#define DEBUG_YSTEP_DUP_PIN 21 //duplicate y-step output to pin 21 (SCL on P3)
|
||||
//#define DEBUG_BLINK_ACTIVE
|
||||
//#define DEBUG_DISABLE_FANCHECK //disable fan check (no ISR INT7, check disabled)
|
||||
//#define DEBUG_DISABLE_FSENSORCHECK //disable fsensor check (no ISR INT7, check disabled)
|
||||
#define DEBUG_DUMP_TO_2ND_SERIAL //dump received characters to 2nd serial line
|
||||
#define DEBUG_STEPPER_TIMER_MISSED // Stop on stepper timer overflow, beep and display a message.
|
||||
#define PLANNER_DIAGNOSTICS // Show the planner queue status on printer display.
|
||||
#endif /* DEBUG_BUILD */
|
||||
|
||||
//#define EXPERIMENTAL_FEATURES
|
||||
//#define TMC2130_LINEARITY_CORRECTION
|
||||
//#define TMC2130_VARIABLE_RESOLUTION
|
||||
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
EXTRUDER SETTINGS
|
||||
*------------------------------------*/
|
||||
TMC2130 default settings
|
||||
*------------------------------------*/
|
||||
|
||||
#define TMC2130_FCLK 12000000 // fclk = 12MHz
|
||||
|
||||
#define TMC2130_USTEPS_XY 16 // microstep resolution for XY axes
|
||||
#define TMC2130_USTEPS_Z 16 // microstep resolution for Z axis
|
||||
#define TMC2130_USTEPS_E 32 // microstep resolution for E axis
|
||||
#define TMC2130_INTPOL_XY 1 // extrapolate 256 for XY axes
|
||||
#define TMC2130_INTPOL_Z 1 // extrapolate 256 for Z axis
|
||||
#define TMC2130_INTPOL_E 1 // extrapolate 256 for E axis
|
||||
|
||||
#define TMC2130_PWM_GRAD_X 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_X 230 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_X 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_X 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_Y 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_Y 235 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_Y 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_Y 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_E 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_E 235 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_E 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_E 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_Z 4 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_Z 200 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_Z 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_Z 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_E 4 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_E 240 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_E 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_E 2 // PWMCONF
|
||||
|
||||
#define TMC2130_TOFF_XYZ 3 // CHOPCONF // fchop = 27.778kHz
|
||||
#define TMC2130_TOFF_E 3 // CHOPCONF // fchop = 27.778kHz
|
||||
//#define TMC2130_TOFF_E 4 // CHOPCONF // fchop = 21.429kHz
|
||||
//#define TMC2130_TOFF_E 5 // CHOPCONF // fchop = 17.442kHz
|
||||
|
||||
//#define TMC2130_STEALTH_E // Extruder stealthChop mode
|
||||
//#define TMC2130_CNSTOFF_E // Extruder constant-off-time mode (similar to MK2)
|
||||
|
||||
//#define TMC2130_PWM_DIV 683 // PWM frequency divider (1024, 683, 512, 410)
|
||||
#define TMC2130_PWM_DIV 512 // PWM frequency divider (1024, 683, 512, 410)
|
||||
#define TMC2130_PWM_CLK (2 * TMC2130_FCLK / TMC2130_PWM_DIV) // PWM frequency (23.4kHz, 35.1kHz, 46.9kHz, 58.5kHz for 12MHz fclk)
|
||||
|
||||
#define TMC2130_TPWMTHRS 0 // TPWMTHRS - Sets the switching speed threshold based on TSTEP from stealthChop to spreadCycle mode
|
||||
#define TMC2130_THIGH 0 // THIGH - unused
|
||||
|
||||
//#define TMC2130_TCOOLTHRS_X 450 // TCOOLTHRS - coolstep treshold
|
||||
//#define TMC2130_TCOOLTHRS_Y 450 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_X 430 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_Y 430 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_Z 500 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_E 500 // TCOOLTHRS - coolstep treshold
|
||||
|
||||
#define TMC2130_SG_HOMING 1 // stallguard homing
|
||||
#define TMC2130_SG_THRS_X 3 // stallguard sensitivity for X axis
|
||||
#define TMC2130_SG_THRS_Y 3 // stallguard sensitivity for Y axis
|
||||
#define TMC2130_SG_THRS_Z 3 // stallguard sensitivity for Z axis
|
||||
#define TMC2130_SG_THRS_E 3 // stallguard sensitivity for E axis
|
||||
|
||||
//new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
|
||||
#define TMC2130_CURRENTS_H {16, 20, 28, 36} // default holding currents for all axes
|
||||
#define TMC2130_CURRENTS_R {16, 20, 28, 36} // default running currents for all axes
|
||||
#define TMC2130_UNLOAD_CURRENT_R 12 // lowe current for M600 to protect filament sensor
|
||||
|
||||
//#define TMC2130_DEBUG
|
||||
//#define TMC2130_DEBUG_WR
|
||||
//#define TMC2130_DEBUG_RD
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
EXTRUDER SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Mintemps
|
||||
#define HEATER_0_MINTEMP 15
|
||||
@ -109,7 +264,7 @@ EXTRUDER SETTINGS
|
||||
#endif
|
||||
#define HEATER_1_MAXTEMP 305
|
||||
#define HEATER_2_MAXTEMP 305
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 125
|
||||
|
||||
#if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
|
||||
// Define PID constants for extruder with PT100
|
||||
@ -118,13 +273,16 @@ EXTRUDER SETTINGS
|
||||
#define DEFAULT_Kd 73.76
|
||||
#else
|
||||
// Define PID constants for extruder
|
||||
#define DEFAULT_Kp 40.925
|
||||
#define DEFAULT_Ki 4.875
|
||||
#define DEFAULT_Kd 86.085
|
||||
//#define DEFAULT_Kp 40.925
|
||||
//#define DEFAULT_Ki 4.875
|
||||
//#define DEFAULT_Kd 86.085
|
||||
#define DEFAULT_Kp 16.13
|
||||
#define DEFAULT_Ki 1.1625
|
||||
#define DEFAULT_Kd 56.23
|
||||
#endif
|
||||
|
||||
// Extrude mintemp
|
||||
#define EXTRUDE_MINTEMP 130
|
||||
#define EXTRUDE_MINTEMP 190
|
||||
|
||||
// Extruder cooling fans
|
||||
#define EXTRUDER_0_AUTO_FAN_PIN 8
|
||||
@ -134,21 +292,23 @@ EXTRUDER SETTINGS
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
||||
#ifdef SNMM
|
||||
//#define BOWDEN_LENGTH 408
|
||||
#define BOWDEN_LENGTH 433 //default total length for filament fast loading part; max length for extrusion is 465 mm!; this length can be adjusted in service menu
|
||||
#define FIL_LOAD_LENGTH 102 //length for loading filament into the nozzle
|
||||
#define FIL_COOLING 10 //length for cooling moves
|
||||
#define E_MOTOR_LOW_CURRENT 350 // current for PRUSAY code
|
||||
#define E_MOTOR_HIGH_CURRENT 700 //current for unloading filament, stop print, PRUSAY ramming
|
||||
#endif //SNMM
|
||||
|
||||
//#define DIS //for measuring bed heigth and PINDa detection heigth relative to auto home point, experimental function
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
CHANGE FILAMENT SETTINGS
|
||||
*------------------------------------*/
|
||||
LOAD/UNLOAD FILAMENT SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Load filament commands
|
||||
#define LOAD_FILAMENT_0 "M83"
|
||||
#define LOAD_FILAMENT_1 "G1 E70 F400"
|
||||
#define LOAD_FILAMENT_2 "G1 E40 F100"
|
||||
|
||||
// Unload filament commands
|
||||
#define UNLOAD_FILAMENT_0 "M83"
|
||||
#define UNLOAD_FILAMENT_1 "G1 E-80 F7000"
|
||||
|
||||
/*------------------------------------
|
||||
CHANGE FILAMENT SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Filament change configuration
|
||||
#define FILAMENTCHANGEENABLE
|
||||
@ -165,22 +325,22 @@ CHANGE FILAMENT SETTINGS
|
||||
|
||||
#define FILAMENTCHANGE_XYFEED 50
|
||||
#define FILAMENTCHANGE_EFEED 20
|
||||
#define FILAMENTCHANGE_RFEED 400
|
||||
//#define FILAMENTCHANGE_RFEED 400
|
||||
#define FILAMENTCHANGE_RFEED 7000 / 60
|
||||
#define FILAMENTCHANGE_EXFEED 2
|
||||
#define FILAMENTCHANGE_ZFEED 15
|
||||
|
||||
#endif
|
||||
|
||||
/*------------------------------------
|
||||
ADDITIONAL FEATURES SETTINGS
|
||||
*------------------------------------*/
|
||||
ADDITIONAL FEATURES SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Define Prusa filament runout sensor
|
||||
//#define FILAMENT_RUNOUT_SUPPORT
|
||||
|
||||
#ifdef FILAMENT_RUNOUT_SUPPORT
|
||||
#define FILAMENT_RUNOUT_SENSOR 1
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
|
||||
// temperature runaway
|
||||
@ -191,25 +351,30 @@ ADDITIONAL FEATURES SETTINGS
|
||||
#define TEMP_RUNAWAY_EXTRUDER_TIMEOUT 45
|
||||
|
||||
/*------------------------------------
|
||||
MOTOR CURRENT SETTINGS
|
||||
*------------------------------------*/
|
||||
MOTOR CURRENT SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Motor Current setting for BIG RAMBo
|
||||
#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||
#define DIGIPOT_MOTOR_CURRENT_LOUD {135,135,135,135,135}
|
||||
|
||||
// Motor Current settings for RAMBo mini PWM value = MotorCurrentSetting * 255 / range
|
||||
#if MOTHERBOARD == 203 || MOTHERBOARD == 200
|
||||
#if MOTHERBOARD == 200 || MOTHERBOARD == 203
|
||||
#define MOTOR_CURRENT_PWM_RANGE 2000
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT {270, 830, 450} // {XY,Z,E}
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {540, 830, 500} // {XY,Z,E}
|
||||
#define Z_SILENT 0
|
||||
#define Z_HIGH_POWER 200
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT {400, 750, 750} // {XY,Z,E}
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {400, 750, 750} // {XY,Z,E}
|
||||
#endif
|
||||
|
||||
/*------------------------------------
|
||||
BED SETTINGS
|
||||
*------------------------------------*/
|
||||
PAT9125 SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
#define PAT9125_XRES 0
|
||||
#define PAT9125_YRES 255
|
||||
|
||||
/*------------------------------------
|
||||
BED SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
// Define Mesh Bed Leveling system to enable it
|
||||
#define MESH_BED_LEVELING
|
||||
@ -234,7 +399,7 @@ BED SETTINGS
|
||||
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
|
||||
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 9 // Z probe to nozzle Y offset: -front +behind
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4 // Z probe to nozzle Z offset: -below (always!)
|
||||
#endif
|
||||
|
||||
@ -289,15 +454,15 @@ BED SETTINGS
|
||||
|
||||
|
||||
/*-----------------------------------
|
||||
PREHEAT SETTINGS
|
||||
*------------------------------------*/
|
||||
PREHEAT SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
#define FARM_PREHEAT_HOTEND_TEMP 250
|
||||
#define FARM_PREHEAT_HPB_TEMP 40
|
||||
#define FARM_PREHEAT_FAN_SPEED 0
|
||||
|
||||
#define PLA_PREHEAT_HOTEND_TEMP 215
|
||||
#define PLA_PREHEAT_HPB_TEMP 55
|
||||
#define PLA_PREHEAT_HPB_TEMP 60
|
||||
#define PLA_PREHEAT_FAN_SPEED 0
|
||||
|
||||
#define ABS_PREHEAT_HOTEND_TEMP 255
|
||||
@ -312,17 +477,17 @@ PREHEAT SETTINGS
|
||||
#define PP_PREHEAT_HPB_TEMP 100
|
||||
#define PP_PREHEAT_FAN_SPEED 0
|
||||
|
||||
#define PET_PREHEAT_HOTEND_TEMP 240
|
||||
#define PET_PREHEAT_HPB_TEMP 90
|
||||
#define PET_PREHEAT_HOTEND_TEMP 230
|
||||
#define PET_PREHEAT_HPB_TEMP 85
|
||||
#define PET_PREHEAT_FAN_SPEED 0
|
||||
|
||||
#define FLEX_PREHEAT_HOTEND_TEMP 230
|
||||
#define FLEX_PREHEAT_HOTEND_TEMP 240
|
||||
#define FLEX_PREHEAT_HPB_TEMP 50
|
||||
#define FLEX_PREHEAT_FAN_SPEED 0
|
||||
|
||||
/*------------------------------------
|
||||
THERMISTORS SETTINGS
|
||||
*------------------------------------*/
|
||||
THERMISTORS SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
//
|
||||
//--NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
|
||||
@ -377,6 +542,8 @@ THERMISTORS SETTINGS
|
||||
#else
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#endif
|
||||
#define TEMP_SENSOR_PINDA 1
|
||||
#define TEMP_SENSOR_AMBIENT 2000
|
||||
|
||||
#define STACK_GUARD_TEST_VALUE 0xA2A2
|
||||
|
||||
@ -389,9 +556,13 @@ THERMISTORS SETTINGS
|
||||
#define Z_BABYSTEP_MIN -3999
|
||||
#define Z_BABYSTEP_MAX 0
|
||||
|
||||
#define PINDA_PREHEAT_X 20
|
||||
#define PINDA_PREHEAT_Y 60
|
||||
#define PINDA_PREHEAT_Z 0.15
|
||||
/*
|
||||
#define PINDA_PREHEAT_X 70
|
||||
#define PINDA_PREHEAT_Y -3
|
||||
#define PINDA_PREHEAT_Z 1
|
||||
#define PINDA_PREHEAT_Z 1*/
|
||||
#define PINDA_HEAT_T 120 //time in s
|
||||
|
||||
#define PINDA_MIN_T 50
|
||||
@ -402,26 +573,34 @@ THERMISTORS SETTINGS
|
||||
#define PING_TIME_LONG 600 //10 min; used when length of commands buffer > 0 to avoid false triggering when dealing with long gcodes
|
||||
#define PING_ALLERT_PERIOD 60 //time in s
|
||||
|
||||
#define NC_TIME 10 //time in s for periodic important status messages sending which needs reponse from monitoring
|
||||
#define NC_BUTTON_LONG_PRESS 15 //time in s
|
||||
|
||||
#define LONG_PRESS_TIME 1000 //time in ms for button long press
|
||||
#define BUTTON_BLANKING_TIME 200 //time in ms for blanking after button release
|
||||
|
||||
#define DEFAULT_PID_TEMP 210
|
||||
|
||||
#define MIN_PRINT_FAN_SPEED 75
|
||||
|
||||
#ifdef SNMM
|
||||
#define DEFAULT_RETRACTION 4 //used for PINDA temp calibration and pause print
|
||||
#else
|
||||
#define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
|
||||
#endif
|
||||
|
||||
#define END_FILE_SECTION 10000 //number of bytes from end of file used for checking if file is complete
|
||||
// How much shall the print head be lifted on power panic?
|
||||
// Ideally the Z axis will reach a zero phase of the stepper driver on power outage. To simplify this,
|
||||
// UVLO_Z_AXIS_SHIFT shall be an integer multiply of the stepper driver cycle, that is 4x full step.
|
||||
// For example, the Prusa i3 MK2 with 16 microsteps per full step has Z stepping of 400 microsteps per mm.
|
||||
// At 400 microsteps per mm, a full step lifts the Z axis by 0.04mm, and a stepper driver cycle is 0.16mm.
|
||||
// The following example, 12 * (4 * 16 / 400) = 12 * 0.16mm = 1.92mm.
|
||||
//#define UVLO_Z_AXIS_SHIFT 1.92
|
||||
#define UVLO_Z_AXIS_SHIFT 0.64
|
||||
// If power panic occured, and the current temperature is higher then target temperature before interrupt minus this offset, print will be recovered automatically.
|
||||
#define AUTOMATIC_UVLO_BED_TEMP_OFFSET 5
|
||||
|
||||
#define HEATBED_V2
|
||||
|
||||
#define M600_TIMEOUT 600 //seconds
|
||||
|
||||
#ifndef SNMM
|
||||
#define SUPPORT_VERBOSITY
|
||||
#endif
|
||||
//#define SUPPORT_VERBOSITY
|
||||
|
||||
#endif //__CONFIGURATION_PRUSA_H
|
||||
|
||||
@ -922,7 +922,7 @@ extern bool xyzcal_find_bed_induction_sensor_point_xy();
|
||||
#endif //HEATBED_V2
|
||||
|
||||
#ifdef HEATBED_V2
|
||||
/*inline */bool find_bed_induction_sensor_point_xy(int verbosity_level)
|
||||
inline bool find_bed_induction_sensor_point_xy(int verbosity_level)
|
||||
{
|
||||
#ifdef NEW_XYZCAL
|
||||
return xyzcal_find_bed_induction_sensor_point_xy();
|
||||
@ -1174,6 +1174,9 @@ extern bool xyzcal_find_bed_induction_sensor_point_xy();
|
||||
#else //HEATBED_V2
|
||||
inline bool find_bed_induction_sensor_point_xy(int verbosity_level)
|
||||
{
|
||||
#ifdef NEW_XYZCAL
|
||||
return xyzcal_find_bed_induction_sensor_point_xy();
|
||||
#else //NEW_XYZCAL
|
||||
#ifdef SUPPORT_VERBOSITY
|
||||
if (verbosity_level >= 10) MYSERIAL.println("find bed induction sensor point xy");
|
||||
#endif // SUPPORT_VERBOSITY
|
||||
@ -1366,6 +1369,7 @@ inline bool find_bed_induction_sensor_point_xy(int verbosity_level)
|
||||
|
||||
enable_z_endstop(false);
|
||||
return found;
|
||||
#endif //NEW_XYZCAL
|
||||
}
|
||||
|
||||
#endif //HEATBED_V2
|
||||
|
||||
@ -91,6 +91,10 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
|
||||
#define Z_AXIS_ALWAYS_ON 1
|
||||
|
||||
// New XYZ calibration
|
||||
//#define NEW_XYZCAL
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
EXTRUDER SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
@ -89,6 +89,19 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
|
||||
#define Z_AXIS_ALWAYS_ON 1
|
||||
|
||||
// New XYZ calibration
|
||||
#define NEW_XYZCAL
|
||||
|
||||
// Fan check
|
||||
#define FANCHECK
|
||||
|
||||
// Safety timer
|
||||
#define SAFETYTIMER
|
||||
|
||||
// Filament sensor
|
||||
#define PAT9125
|
||||
|
||||
|
||||
|
||||
//#define DEBUG_BUILD
|
||||
#ifdef DEBUG_BUILD
|
||||
@ -168,12 +181,6 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
|
||||
#define PAT9125 //!< Filament sensor
|
||||
#define FANCHECK
|
||||
//#define WATCHDOG
|
||||
#define SAFETYTIMER
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
LOAD/UNLOAD FILAMENT SETTINGS
|
||||
*------------------------------------*/
|
||||
|
||||
Loading…
Reference in New Issue
Block a user