3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

removed unused cond. trans. for NEW_SPI

Browse Source
This commit is contained in:
Robert Pelnar 2018-06-10 16:11:39 +02:00
parent fcfb4cdcae
commit 4567d2feca
3 changed files with 0 additions and 69 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Firmware/Marlin_main.cpp
View File

@ -82,9 +82,7 @@
#include "swspi.h"
#endif //SWSPI
#ifdef NEW_SPI
#include "spi.h"
#endif //NEW_SPI
#ifdef SWI2C
#include "swi2c.h"
@ -1087,9 +1085,7 @@ void setup()
lcd_init();
fdev_setup_stream(lcdout, lcd_putchar, NULL, _FDEV_SETUP_WRITE); //setup lcdout stream
#ifdef NEW_SPI
spi_init();
#endif //NEW_SPI
lcd_splash();

62
Firmware/tmc2130.cpp
View File

@ -6,11 +6,7 @@
#include "LiquidCrystal_Prusa.h"
#include "ultralcd.h"
#include "language.h"
#ifndef NEW_SPI
#include <SPI.h>
#else //NEW_SPI
#include "spi.h"
#endif //NEW_SPI
extern LiquidCrystal_Prusa lcd;
@ -162,9 +158,6 @@ void tmc2130_init()
SET_INPUT(Y_TMC2130_DIAG);
SET_INPUT(Z_TMC2130_DIAG);
SET_INPUT(E0_TMC2130_DIAG);
#ifndef NEW_SPI
SPI.begin();
#endif //NEW_SPI
for (int axis = 0; axis < 2; axis++) // X Y axes
{
tmc2130_setup_chopper(axis, tmc2130_mres[axis], tmc2130_current_h[axis], tmc2130_current_r[axis]);
@ -628,59 +621,6 @@ inline void tmc2130_cs_high(uint8_t axis)
}
}
#ifndef NEW_SPI
uint8_t tmc2130_tx(uint8_t axis, uint8_t addr, uint32_t wval)
{
//datagram1 - request
printf_P(PSTR("tmc2130_tx %d 0x%02hhx, 0x%08lx\n"), axis, addr, wval);
SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
printf_P(PSTR(" SPCR = 0x%02hhx\n"), SPCR);
printf_P(PSTR(" SPSR = 0x%02hhx\n"), SPSR);
tmc2130_cs_low(axis);
SPI.transfer(addr); // address
SPI.transfer((wval >> 24) & 0xff); // MSB
SPI.transfer((wval >> 16) & 0xff);
SPI.transfer((wval >> 8) & 0xff);
SPI.transfer(wval & 0xff); // LSB
tmc2130_cs_high(axis);
SPI.endTransaction();
}
uint8_t tmc2130_rx(uint8_t axis, uint8_t addr, uint32_t* rval)
{
//datagram1 - request
SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
tmc2130_cs_low(axis);
SPI.transfer(addr); // address
SPI.transfer(0); // MSB
SPI.transfer(0);
SPI.transfer(0);
SPI.transfer(0); // LSB
tmc2130_cs_high(axis);
SPI.endTransaction();
//datagram2 - response
SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
tmc2130_cs_low(axis);
uint8_t stat = SPI.transfer(0); // status
uint32_t val32 = 0;
val32 = SPI.transfer(0); // MSB
val32 = (val32 << 8) | SPI.transfer(0);
val32 = (val32 << 8) | SPI.transfer(0);
val32 = (val32 << 8) | SPI.transfer(0); // LSB
tmc2130_cs_high(axis);
SPI.endTransaction();
if (rval != 0) *rval = val32;
return stat;
}
#else //NEW_SPI
//Arduino SPI
//#define TMC2130_SPI_ENTER() SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3))
//#define TMC2130_SPI_TXRX SPI.transfer
//#define TMC2130_SPI_LEAVE SPI.endTransaction
//spi
#define TMC2130_SPI_ENTER() spi_setup(TMC2130_SPCR, TMC2130_SPSR)
#define TMC2130_SPI_TXRX spi_txrx
@ -727,8 +667,6 @@ uint8_t tmc2130_rx(uint8_t axis, uint8_t addr, uint32_t* rval)
return stat;
}
#endif //NEW_SPI
void tmc2130_eeprom_load_config()
{

3
Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
View File

@ -118,9 +118,6 @@
// New XYZ calibration
#define NEW_XYZCAL
// Do not use Arduino SPI
#define NEW_SPI
// Watchdog support
#define WATCHDOG