diff --git a/Firmware/temperature.cpp b/Firmware/temperature.cpp
index dbd5fd9d..d429bb88 100755
--- a/Firmware/temperature.cpp
+++ b/Firmware/temperature.cpp
@@ -2330,13 +2330,17 @@ float unscalePID_d(float d)
 bool has_temperature_compensation()
 {
 #ifdef SUPERPINDA_SUPPORT
+#ifdef PINDA_TEMP_COMP
    	uint8_t pinda_temp_compensation = eeprom_read_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION);
     if (pinda_temp_compensation == EEPROM_EMPTY_VALUE) //Unkown PINDA temp compenstation, so check it.
       {
+#endif //PINDA_TEMP_COMP
         return (current_temperature_pinda >= PINDA_MINTEMP) ? true : false;
+#ifdef PINDA_TEMP_COMP
       }
     else if (pinda_temp_compensation == 0) return true; //Overwritten via LCD menu SuperPINDA [No]
     else return false; //Overwritten via LCD menu SuperPINDA [YES]
+#endif //PINDA_TEMP_COMP
 #else
     return true;
 #endif
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index d721e044..7dca76be 100755
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -5753,14 +5753,14 @@ void lcd_hw_setup_menu(void)                      // can not be "static"
         MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
     }
 
-#ifdef SUPERPINDA_SUPPORT
+#ifdef PINDA_TEMP_COMP
 	//! The SuperPINDA is detected when the PINDA temp is below its defined limit.
 	//! This works well on the EINSY board but not on the miniRAMBo board as
 	//! as a disconnected SuperPINDA will show higher temps compared to an EINSY board.
 	//! 
 	//! This menu allows the user to en-/disable the SuperPINDA manualy
 	MENU_ITEM_TOGGLE_P(_N("SuperPINDA"), eeprom_read_byte((unsigned char *)EEPROM_PINDA_TEMP_COMPENSATION) ? _T(MSG_YES) : _T(MSG_NO), lcd_pinda_temp_compensation_toggle);
-#endif //SUPERPINDA_SUPPORT
+#endif //PINDA_TEMP_COMP
 
     MENU_END();
 }
@@ -9245,6 +9245,7 @@ void lcd_experimental_menu()
     MENU_END();
 }
 
+#ifdef PINDA_TEMP_COMP
 void lcd_pinda_temp_compensation_toggle()
 {
 	uint8_t pinda_temp_compensation = eeprom_read_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION);
@@ -9253,6 +9254,7 @@ void lcd_pinda_temp_compensation_toggle()
 	else
 		pinda_temp_compensation = !pinda_temp_compensation;
 	eeprom_update_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION, pinda_temp_compensation);
-	SERIAL_ECHOLNPGM("LCD U SuperPINDA:");
+	SERIAL_ECHOLNPGM("SuperPINDA:");
 	SERIAL_ECHOLN(pinda_temp_compensation);
 }
+#endif //PINDA_TEMP_COMP
diff --git a/Firmware/ultralcd.h b/Firmware/ultralcd.h
index e45daaa1..cca4eced 100755
--- a/Firmware/ultralcd.h
+++ b/Firmware/ultralcd.h
@@ -262,6 +262,8 @@ void lcd_wizard(WizState state);
 extern void lcd_experimental_toggle();
 extern void lcd_experimental_menu();
 
+#ifdef PINDA_TEMP_COMP
 extern void lcd_pinda_temp_compensation_toggle();
+#endif //PINDA_TEMP_COMP
 
 #endif //ULTRALCD_H
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
index fedb1c04..1e77dce8 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
@@ -177,6 +177,7 @@
 #endif
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 30 //The miniRAMBo thermistor readings below 30°C aren't very accurate
+#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
index 314aaf6e..2d4d73c2 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
@@ -178,6 +178,7 @@
 #endif
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 30 //The miniRAMBo thermistor readings below 30°C aren't very accurate
+#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
index ba05843d..4670d218 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
@@ -177,6 +177,7 @@
 #endif
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 30 //The miniRAMBo thermistor readings below 30°C aren't very accurate
+#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
index 857acbab..22af4341 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
@@ -178,6 +178,7 @@
 #endif
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 30 //The miniRAMBo thermistor readings below 30°C aren't very accurate
+#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
diff --git a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
index f2b302ae..b7c5d54c 100644
--- a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
@@ -297,6 +297,7 @@
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 10
 #define AMBIENT_MINTEMP -30
+//#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)
diff --git a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
index 668f3000..b278ab00 100644
--- a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
@@ -299,6 +299,7 @@
 #define SUPERPINDA_SUPPORT
 #define PINDA_MINTEMP 10
 #define AMBIENT_MINTEMP -30
+//#define PINDA_TEMP_COMP //Used to enable SuperPINDA toggle menu/function
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)