diff --git a/Firmware/Marlin.h b/Firmware/Marlin.h
index 9706cfbb..83e587d9 100644
--- a/Firmware/Marlin.h
+++ b/Firmware/Marlin.h
@@ -496,5 +496,5 @@ void proc_commands();
 void M600_load_filament();
 void M600_load_filament_movements();
 void M600_wait_for_user(float HotendTempBckp);
-void M600_check_state();
+void M600_check_state(float nozzle_temp);
 void load_filament_final_feed();
diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index 52e1e356..5b04d749 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -3055,12 +3055,12 @@ static void gcode_M600(bool automatic, float x_position, float y_position, float
                 manage_response(false, false);
             }
         }
-        mmu_M600_load_filament(automatic);
+        mmu_M600_load_filament(automatic, HotendTempBckp);
     }
     else
         M600_load_filament();
 
-    if (!automatic) M600_check_state();
+    if (!automatic) M600_check_state(HotendTempBckp);
 
 		lcd_update_enable(true);
 
@@ -9109,38 +9109,41 @@ void load_filament_final_feed()
 	plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], FILAMENTCHANGE_EFEED_FINAL, active_extruder);
 }
 
-void M600_check_state()
+//! @brief Wait for user to check the state
+//! @par nozzle_temp nozzle temperature to load filament
+void M600_check_state(float nozzle_temp)
 {
-		//Wait for user to check the state
-		lcd_change_fil_state = 0;
-		while (lcd_change_fil_state != 1){
-			lcd_change_fil_state = 0;
-			KEEPALIVE_STATE(PAUSED_FOR_USER);
-			lcd_alright();
-			KEEPALIVE_STATE(IN_HANDLER);
-			switch(lcd_change_fil_state){
-				// Filament failed to load so load it again
-				case 2:
-					if (mmu_enabled)
-						mmu_M600_load_filament(false); //nonautomatic load; change to "wrong filament loaded" option?
-					else
-						M600_load_filament_movements();
-					break;
+    lcd_change_fil_state = 0;
+    while (lcd_change_fil_state != 1)
+    {
+        lcd_change_fil_state = 0;
+        KEEPALIVE_STATE(PAUSED_FOR_USER);
+        lcd_alright();
+        KEEPALIVE_STATE(IN_HANDLER);
+        switch(lcd_change_fil_state)
+        {
+        // Filament failed to load so load it again
+        case 2:
+            if (mmu_enabled)
+                mmu_M600_load_filament(false, nozzle_temp); //nonautomatic load; change to "wrong filament loaded" option?
+            else
+                M600_load_filament_movements();
+            break;
 
-				// Filament loaded properly but color is not clear
-				case 3:
-					st_synchronize();
-					load_filament_final_feed();
-					lcd_loading_color();
-					st_synchronize();
-					break;
-                 
-				// Everything good             
-				default:
-					lcd_change_success();
-					break;
-			}
-		}
+        // Filament loaded properly but color is not clear
+        case 3:
+            st_synchronize();
+            load_filament_final_feed();
+            lcd_loading_color();
+            st_synchronize();
+            break;
+
+        // Everything good
+        default:
+            lcd_change_success();
+            break;
+        }
+    }
 }
 
 //! @brief Wait for user action
diff --git a/Firmware/mmu.cpp b/Firmware/mmu.cpp
index 449efabd..45a3c421 100644
--- a/Firmware/mmu.cpp
+++ b/Firmware/mmu.cpp
@@ -830,37 +830,43 @@ void mmu_M600_wait_and_beep() {
 		WRITE(BEEPER, LOW);
 }
 
-void mmu_M600_load_filament(bool automatic)
+//! @brief load filament for mmu v2
+//! @par nozzle_temp nozzle temperature to load filament
+void mmu_M600_load_filament(bool automatic, float nozzle_temp)
 { 
-	//load filament for mmu v2
-		  tmp_extruder = mmu_extruder;
-		  if (!automatic) {
-#ifdef MMU_M600_SWITCH_EXTRUDER
-		      bool yes = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Do you want to switch extruder?"), false);
-			  if(yes) tmp_extruder = choose_extruder_menu();
-#endif //MMU_M600_SWITCH_EXTRUDER
-		  }
-		  else {
-			  tmp_extruder = ad_getAlternative(tmp_extruder);
-		  }
-		  lcd_update_enable(false);
-		  lcd_clear();
-		  lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_LOADING_FILAMENT));
-		  lcd_print(" ");
-		  lcd_print(tmp_extruder + 1);
-		  snmm_filaments_used |= (1 << tmp_extruder); //for stop print
+    tmp_extruder = mmu_extruder;
+    if (!automatic)
+    {
+    #ifdef MMU_M600_SWITCH_EXTRUDER
+        bool yes = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Do you want to switch extruder?"), false);
+        if(yes) tmp_extruder = choose_extruder_menu();
+    #endif //MMU_M600_SWITCH_EXTRUDER
+    }
+    else
+    {
+        tmp_extruder = ad_getAlternative(tmp_extruder);
+    }
+    lcd_update_enable(false);
+    lcd_clear();
+    lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_LOADING_FILAMENT));
+    lcd_print(" ");
+    lcd_print(tmp_extruder + 1);
+    snmm_filaments_used |= (1 << tmp_extruder); //for stop print
 
-//		  printf_P(PSTR("T code: %d \n"), tmp_extruder);
-//		  mmu_printf_P(PSTR("T%d\n"), tmp_extruder);
-		  mmu_command(MmuCmd::T0 + tmp_extruder);
+    //printf_P(PSTR("T code: %d \n"), tmp_extruder);
+    //mmu_printf_P(PSTR("T%d\n"), tmp_extruder);
+    setTargetHotend(nozzle_temp,active_extruder);
+    mmu_wait_for_heater_blocking();
 
-		  manage_response(false, true, MMU_LOAD_MOVE);
-		  mmu_continue_loading();
-    	  mmu_extruder = tmp_extruder; //filament change is finished
-		  
-		  mmu_load_to_nozzle();
-		  load_filament_final_feed();
-		  st_synchronize();
+    mmu_command(MmuCmd::T0 + tmp_extruder);
+
+    manage_response(false, true, MMU_LOAD_MOVE);
+    mmu_continue_loading();
+    mmu_extruder = tmp_extruder; //filament change is finished
+
+    mmu_load_to_nozzle();
+    load_filament_final_feed();
+    st_synchronize();
 }
 
 
diff --git a/Firmware/mmu.h b/Firmware/mmu.h
index b498a374..c2e8b713 100644
--- a/Firmware/mmu.h
+++ b/Firmware/mmu.h
@@ -97,7 +97,7 @@ extern void manage_response(bool move_axes, bool turn_off_nozzle, uint8_t move =
 
 extern void mmu_load_to_nozzle();
 
-extern void mmu_M600_load_filament(bool automatic);
+extern void mmu_M600_load_filament(bool automatic, float nozzle_temp);
 extern void mmu_M600_wait_and_beep();
 
 extern void extr_mov(float shift, float feed_rate);