3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config for mmu updated

Browse Source
This commit is contained in:
PavelSindler 2018-07-26 14:59:49 +02:00
parent 9b4f786325
commit 5bda19b9f7
2 changed files with 9 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitignore vendored
View File

@ -10,3 +10,4 @@ Firmware/Doc
/Firmware/Firmware.vcxproj
/Firmware/Firmware.vcxproj.filters
/Firmware/Firmware - Shortcut.lnk
/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h.bak

25
Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h
View File

@ -100,16 +100,12 @@
#define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
//Silent mode limits
#define SILENT_MAX_ACCEL 960ul // max axxeleration in silent mode in mm/s^2
#define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
#define SILENT_MAX_FEEDRATE 172 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
#define SILENT_MAX_ACCEL_XY 960ul // max acceleration in silent mode in mm/s^2
#define SILENT_MAX_FEEDRATE_XY 172 // max feedrate in mm/s
//Normal mode limits
#define NORMAL_MAX_ACCEL 2500ul // Y-axis max axxeleration in normal mode in mm/s^2
#define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
#define NORMAL_MAX_FEEDRATE 200 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
//#define SIMPLE_ACCEL_LIMIT //new limitation method for normal/silent
#define NORMAL_MAX_ACCEL_XY 2500ul // max acceleration in normal mode in mm/s^2
#define NORMAL_MAX_FEEDRATE_XY 200 // max feedrate in mm/s
//number of bytes from end of the file to start check
#define END_FILE_SECTION 10000
@ -138,10 +134,12 @@
// Filament sensor
#define PAT9125
#define FILAMENT_SENSOR
// Backlash -
//#define BACKLASH_X
//#define BACKLASH_Y
// Disable some commands
#define _DISABLE_M42_M226
// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
@ -384,13 +382,6 @@
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {400, 750, 750} // {XY,Z,E}
#endif
/*------------------------------------
PAT9125 SETTINGS
*------------------------------------*/
#define PAT9125_XRES 0
#define PAT9125_YRES 255
/*------------------------------------
BED SETTINGS
*------------------------------------*/