From 5cf60a1493460b3ae87c25e430ff3a155a172bd6 Mon Sep 17 00:00:00 2001 From: Robert Pelnar Date: Tue, 12 Jun 2018 13:05:44 +0200 Subject: [PATCH] New ML support - new translation of 'de' and 'es' +merging script merge_lang.sh --- lang/po_new/de.po | 1873 +++++++++++++++++++++++++++++++++++++ lang/po_new/es.po | 1708 +++++++++++++++++++++++++++++++++ lang/po_new/merge_lang.sh | 28 + 3 files changed, 3609 insertions(+) create mode 100644 lang/po_new/de.po create mode 100644 lang/po_new/es.po create mode 100644 lang/po_new/merge_lang.sh diff --git a/lang/po_new/de.po b/lang/po_new/de.po new file mode 100644 index 00000000..1144ad1d --- /dev/null +++ b/lang/po_new/de.po @@ -0,0 +1,1873 @@ +msgid "" +msgstr "" +"Language: de\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: Poedit 2.0.5\n" +"Project-Id-Version: \n" +"POT-Creation-Date: \n" +"PO-Revision-Date: \n" +"Last-Translator: \n" +"Language-Team: \n" + +# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 +#: ultralcd.cpp:3613 +msgid "\\e[2JCrash detection can\\e[1;0Hbe turned on only in\\e[2;0HNormal mode" +msgstr "\\e[2JCrash Erkennung kann\\e[1;0Hnur im Modus Normal\\e[2;0Hgenutzt werden" + +# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 +#: ultralcd.cpp:3626 +msgid "\\e[2JWARNING:\\e[1;0HCrash detection\\e[2;0Hdisabled in\\e[3;0HStealth mode" +msgstr "\\e[2JWARNUNG:\\e[1;0HCrash Erkennung\\e[2;0Hdeaktiviert im\\e[3;0HStealth Modus" + +# MSG_PLANNER_BUFFER_BYTES +#: Marlin_main.cpp:1085 +msgid " PlannerBufferBytes: " +msgstr " PlannerPufferBytes: " + +# MSG_EXTRUDER_CORRECTION_OFF c=6 +#: ultralcd.cpp:6312 +msgid " [off" +msgstr " [aus" + +# MSG_ERR_COLD_EXTRUDE_STOP +#: planner.cpp:745 +msgid " cold extrusion prevented" +msgstr " stopp, Extruder kalt!" + +# MSG_FREE_MEMORY +#: Marlin_main.cpp:1083 +msgid " Free Memory: " +msgstr " Freier Speicher: " + +# MSG_CONFIGURATION_VER +#: Marlin_main.cpp:1073 +msgid " Last Updated: " +msgstr " Letztes Update: " + +# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 +#: messages.c:44 +msgid " of 4" +msgstr " von 4" + +# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 +#: messages.c:59 +msgid " of 9" +msgstr " von 9" + +# MSG_FACTOR +#: ultralcd.cpp:6008 +msgid " \\002 Fact" +msgstr " \\002 Faktor" + +# MSG_MAX +#: ultralcd.cpp:6007 +msgid " \\002 Max" +msgstr " \\002 Max" + +# MSG_MIN +#: ultralcd.cpp:6006 +msgid " \\002 Min" +msgstr " \\002 Min" + +# MSG_BABYSTEPPING_Z c=20 +#: ultralcd.cpp:2487 +msgid "Adjusting Z" +msgstr "Z wurde eingestellt" + +# MSG_ALL c=19 r=1 +#: messages.c:11 +msgid "All" +msgstr "Alle" + +# MSG_SELFTEST_CHECK_ALLCORRECT c=20 +#: ultralcd.cpp:7235 +msgid "All correct " +msgstr "Alles richtig " + +# MSG_WIZARD_DONE c=20 r=8 +#: messages.c:103 +msgid "All is done. Happy printing!" +msgstr "Alles abgeschlossen. Viel Spass beim Drucken!" + +# MSG_PRESS c=20 +#: ultralcd.cpp:1916 +msgid "and press the knob" +msgstr "und Knopf druecken" + +# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 +#: ultralcd.cpp:2803 +msgid "Are left and right Z~carriages all up?" +msgstr "" +"Sind linke+rechte Z-\n" +"Schlitten ganz oben?" + +# MSG_ADJUSTZ +#: ultralcd.cpp:2600 +msgid "Auto adjust Z?" +msgstr "Auto Z einstellen?" + +# MSG_AUTO_HOME +#: messages.c:12 +msgid "Auto home" +msgstr "Startposition" + +# MSG_AUTOLOAD_FILAMENT c=17 +#: ultralcd.cpp:5803 +msgid "AutoLoad filament" +msgstr "Auto-Laden Filament" + +# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 +#: ultralcd.cpp:3642 +msgid "Autoloading filament available only when filament sensor is turned on..." +msgstr "" +"Automatisches Laden\n" +"Filament nur bei einge\n" +"schaltetem Filament-\n" +"sensor verfuegbar..." + +# MSG_AUTOLOADING_ENABLED c=20 r=4 +#: ultralcd.cpp:2089 +msgid "Autoloading filament is active, just press the knob and insert filament..." +msgstr "" +"Automatisches Laden\n" +"Filament ist aktiv,\n" +"Knopf druecken und \n" +"Filament einlegen..." + +# MSG_SELFTEST_AXIS +#: ultralcd.cpp:7009 +msgid "Axis" +msgstr "Achse" + +# MSG_SELFTEST_AXIS_LENGTH +#: ultralcd.cpp:7007 +msgid "Axis length" +msgstr "Achsenlaenge" + +# MSG_BABYSTEPPING_X +#: ultralcd.cpp:2481 +msgid "Babystepping X" +msgstr "Babystepping X" + +# MSG_BABYSTEPPING_Y +#: ultralcd.cpp:2484 +msgid "Babystepping Y" +msgstr "Babystepping Y" + +# MSG_BED +#: messages.c:16 +msgid "Bed" +msgstr "Bett" + +# MSG_SELFTEST_BEDHEATER +#: ultralcd.cpp:6951 +msgid "Bed / Heater" +msgstr "Bett / Heizung" + +# MSG_BED_DONE +#: messages.c:17 +msgid "Bed done" +msgstr "Bett OK" + +# MSG_BED_HEATING +#: messages.c:18 +msgid "Bed Heating" +msgstr "Bett aufwaermen" + +# MSG_BED_CORRECTION_MENU +#: ultralcd.cpp:4533 +msgid "Bed level correct" +msgstr "Ausgleich Bett ok" + +# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 +#: messages.c:19 +msgid "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset." +msgstr "Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset." + +# MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 +#: Marlin_main.cpp:4031 +msgid "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset." +msgstr "" +"Z-Kalibrierung fehl-\n" +"geschlagen. Sensor\n" +"getrennt/Kabelbruch?\n" +"Warte auf Reset." + +# MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 +#: Marlin_main.cpp:4035 +msgid "Bed leveling failed. Sensor triggered too high. Waiting for reset." +msgstr "" +"Z-Kalibrierung fehl-\n" +"geschlagen. Sensor\n" +"zu hoch ausgeloest.\n" +"Warte auf Reset." + +# MSG_BEGIN_FILE_LIST +#: Marlin_main.cpp:4405 +msgid "Begin file list" +msgstr "Beginn Dateiliste" + +# MSG_MENU_BELT_STATUS c=15 r=1 +#: ultralcd.cpp:1738 +msgid "Belt status" +msgstr "Gurtstatus" + +# MSG_RECOVER_PRINT c=20 r=2 +#: messages.c:72 +msgid "Blackout occurred. Recover print?" +msgstr "" +"Stromausfall!\n" +"Druck\n" +"wiederherstellen?" + +# MSG_CALIBRATE_PINDA c=17 r=1 +#: ultralcd.cpp:3794 +msgid "Calibrate" +msgstr "Kalibrieren" + +# MSG_CALIBRATE_E c=20 r=1 +#: ultralcd.cpp:4526 +msgid "Calibrate E" +msgstr "Kalibrierung E" + +# MSG_CALIBRATE_BED +#: ultralcd.cpp:4522 +msgid "Calibrate XYZ" +msgstr "Kalibrierung XYZ" + +# MSG_HOMEYZ +#: messages.c:52 +msgid "Calibrate Z" +msgstr "Kalibrierung Z" + +# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 +#: ultralcd.cpp:2756 +msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." +msgstr "XYZ Kalibrieren: Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Anschliessend den Knopf druecken." + +# MSG_CALIBRATE_Z_AUTO c=20 r=2 +#: messages.c:21 +msgid "Calibrating Z" +msgstr "Kalibrierung Z" + +# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 +#: ultralcd.cpp:2756 +msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." +msgstr "Z Kalibrieren: Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Anschliessend den Knopf druecken." + +# MSG_MENU_CALIBRATION +#: messages.c:60 +msgid "Calibration" +msgstr "Kalibrierung" + +# MSG_HOMEYZ_DONE +#: ultralcd_implementation_hitachi_HD44780.h:989 +msgid "Calibration done" +msgstr "Kalibrierung OK" + +# MSG_SD_CANT_ENTER_SUBDIR +#: cardreader.cpp:679 +msgid "Cannot enter subdir: " +msgstr "Kann Unterverzeichnis nicht oeffnen: " + +# MSG_SD_CANT_OPEN_SUBDIR +#: cardreader.cpp:97 +msgid "Cannot open subdir" +msgstr "Kann Unterverz. nicht oeffnen" + +# MSG_SD_INSERTED +#: ultralcd.cpp:7550 +msgid "Card inserted" +msgstr "SD Karte eingesetzt" + +# MSG_SD_REMOVED +#: ultralcd.cpp:7556 +msgid "Card removed" +msgstr "SD Karte entfernt" + +# MSG_CHANGE_EXTR c=20 r=1 +#: ultralcd.cpp:5812 +msgid "Change extruder" +msgstr "Wechsel Extruder" + +# MSG_FILAMENTCHANGE +#: messages.c:42 +msgid "Change filament" +msgstr "Filament-Wechsel" + +# MSG_CNG_SDCARD +#: ultralcd.cpp:5777 +msgid "Change SD card" +msgstr "Wechsel SD Karte" + +# MSG_CHANGE_SUCCESS +#: ultralcd.cpp:1927 +msgid "Change success!" +msgstr "Wechsel erfolgr.!" + +# MSG_CORRECTLY c=20 +#: ultralcd.cpp:2006 +msgid "Changed correctly?" +msgstr "Wechsel ok?" + +# MSG_CHANGING_FILAMENT c=20 +#: ultralcd.cpp:1899 +msgid "Changing filament!" +msgstr "Filament-Wechsel!" + +# MSG_SELFTEST_CHECK_BED c=20 +#: messages.c:85 +msgid "Checking bed " +msgstr "Pruefe Bett " + +# MSG_SELFTEST_CHECK_ENDSTOPS c=20 +#: ultralcd.cpp:7226 +msgid "Checking endstops" +msgstr "Pruefe Endschalter" + +# MSG_SELFTEST_CHECK_HOTEND c=20 +#: ultralcd.cpp:7227 +msgid "Checking hotend " +msgstr "Pruefe Duese " + +# MSG_SELFTEST_CHECK_FSENSOR c=20 +#: messages.c:86 +msgid "Checking sensors " +msgstr "Pruefe Sensoren " + +# MSG_SELFTEST_CHECK_X c=20 +#: ultralcd.cpp:7228 +msgid "Checking X axis " +msgstr "Pruefe X Achse " + +# MSG_SELFTEST_CHECK_Y c=20 +#: ultralcd.cpp:7229 +msgid "Checking Y axis " +msgstr "Pruefe Y Achse " + +# MSG_SELFTEST_CHECK_Z c=20 +#: ultralcd.cpp:7230 +msgid "Checking Z axis " +msgstr "Pruefe Z Achse " + +# MSG_ERR_CHECKSUM_MISMATCH +#: cmdqueue.cpp:444 +msgid "checksum mismatch, Last Line: " +msgstr "Pruefsummenfehler, Letzte Zeile: " + +# MSG_CHOOSE_EXTRUDER c=20 r=1 +#: messages.c:53 +msgid "Choose extruder:" +msgstr "Extruder waehlen:" + +# MSG_NOT_COLOR +#: ultralcd.cpp:2018 +msgid "Color not correct" +msgstr "Falsche Farbe" + +# MSG_COOLDOWN +#: messages.c:24 +msgid "Cooldown" +msgstr "Abkuehlen" + +# MSG_CRASHDETECT_ON +#: messages.c:28 +msgid "Crash det. [on]" +msgstr "Crash-Erkennung [an]" + +# MSG_CRASHDETECT_NA +#: messages.c:26 +msgid "Crash det. [N/A]" +msgstr "Crash-Erkennung [nv]" + +# MSG_CRASHDETECT_OFF +#: messages.c:27 +msgid "Crash det. [off]" +msgstr "Crash-Erkennung[aus]" + +# MSG_CRASH_DETECTED c=20 r=1 +#: messages.c:25 +msgid "Crash detected." +msgstr "Crash erkannt." + +# MSG_CURRENT c=19 r=1 +#: ultralcd.cpp:4859 +msgid "Current" +msgstr "Aktuelles" + +# MSG_DATE c=17 r=1 +#: ultralcd.cpp:1828 +msgid "Date:" +msgstr "Datum:" + +# MSG_DISABLE_STEPPERS +#: ultralcd.cpp:4146 +msgid "Disable steppers" +msgstr "Motoren aus" + +# MSG_BABYSTEP_Z_NOT_SET c=20 r=12 +#: messages.c:15 +msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration." +msgstr "Der Abstand zwischen der Spitze der Duese und dem Bett ist noch nicht eingestellt. Bitte folgen Sie dem Handbuch, Kapitel Erste Schritte, Abschnitt Erste Schicht Kalibrierung." + +# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 +#: ultralcd.cpp:4071 +msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?" +msgstr "Moechten Sie den letzten Schritt wiederholen, um den Abstand zwischen Duese und Druckbett neu einzustellen?" + +# MSG_CLEAN_NOZZLE_E c=20 r=8 +#: ultralcd.cpp:3890 +msgid "E calibration finished. Please clean the nozzle. Click when done." +msgstr "E-Kalibrierung beendet. Bitte reinigen Sie die Duese. Klicken wenn fertig." + +# MSG_EXTRUDER_CORRECTION c=9 +#: ultralcd.cpp:4213 +msgid "E-correct" +msgstr "E-Korrektur" + +# MSG_END_FILE_LIST +#: Marlin_main.cpp:4407 +msgid "End file list" +msgstr "Ende Dateiliste" + +# MSG_SELFTEST_ENDSTOP +#: ultralcd.cpp:6969 +msgid "Endstop" +msgstr "Endanschlag" + +# MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 +#: ultralcd.cpp:6975 +msgid "Endstop not hit" +msgstr "Ende nicht getroffen" + +# MSG_SELFTEST_ENDSTOPS +#: ultralcd.cpp:6957 +msgid "Endstops" +msgstr "Endschalter" + +# MSG_ENDSTOPS_HIT +#: messages.c:31 +msgid "endstops hit: " +msgstr "Endanschlag erreicht: " + +# MSG_LANGUAGE_NAME +#: language.c:153 +msgid "English" +msgstr "Deutsch" + +# MSG_Enqueing +msgid "enqueing \"" +msgstr "In Warteschlange \"" + +# MSG_STACK_ERROR c=20 r=4 +#: ultralcd.cpp:5843 +msgid "Error - static memory has been overwritten" +msgstr "" +"Fehler - statischer\n" +"Speicher wurde\n" +"ueberschrieben" + +# MSG_SD_ERR_WRITE_TO_FILE +#: messages.c:76 +msgid "error writing to file" +msgstr "Fehler beim Schreiben in Datei" + +# MSG_ERROR +#: messages.c:34 +msgid "ERROR:" +msgstr "FEHLER:" + +# MSG_FSENS_NOT_RESPONDING c=20 r=4 +#: ultralcd.cpp:3656 +msgid "ERROR: Filament sensor is not responding, please check connection." +msgstr "" +"FEHLER: Filament-\n" +"sensor reagiert\n" +"nicht, bitte \n" +"Verbindung pruefen." + +# MSG_MOVE_E +#: messages.c:35 +msgid "Extruder" +msgstr "Extruder" + +# MSG_EXTRUDER_1 c=17 r=1 +#: ultralcd.cpp:5417 +msgid "Extruder 1" +msgstr "Extruder 1" + +# MSG_EXTRUDER_2 c=17 r=1 +#: ultralcd.cpp:5418 +msgid "Extruder 2" +msgstr "Extruder 2" + +# MSG_EXTRUDER_3 c=17 r=1 +#: ultralcd.cpp:5419 +msgid "Extruder 3" +msgstr "Extruder 3" + +# MSG_EXTRUDER_4 c=17 r=1 +#: ultralcd.cpp:5420 +msgid "Extruder 4" +msgstr "Extruder 4" + +# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 +#: ultralcd.cpp:7244 +msgid "Extruder fan:" +msgstr "Extruder Luefter:" + +# MSG_INFO_EXTRUDER c=15 r=1 +#: ultralcd.cpp:1840 +msgid "Extruder info" +msgstr "Extruder Info" + +# MSG_FSENS_AUTOLOAD_ON c=17 r=1 +#: ultralcd.cpp:4178 +msgid "F. autoload [on]" +msgstr "F.Autoladen [an]" + +# MSG_FSENS_AUTOLOAD_NA c=17 r=1 +#: messages.c:47 +msgid "F. autoload [N/A]" +msgstr "F. Auto Laden [nv]" + +# MSG_FSENS_AUTOLOAD_OFF c=17 r=1 +#: ultralcd.cpp:4181 +msgid "F. autoload [off]" +msgstr "F. Auto Laden [aus]" + +# MSG_FAN_SPEED c=14 +#: messages.c:36 +msgid "Fan speed" +msgstr "Luefter-Tempo" + +# MSG_SELFTEST_FAN c=20 +#: messages.c:82 +msgid "Fan test" +msgstr "Lueftertest" + +# MSG_FANS_CHECK_ON c=17 r=1 +#: ultralcd.cpp:4189 +msgid "Fans check [on]" +msgstr "Luefter Check [an]" + +# MSG_FANS_CHECK_OFF c=17 r=1 +#: ultralcd.cpp:4192 +msgid "Fans check [off]" +msgstr "Luefter Check [aus]" + +# MSG_FSENSOR_ON +#: messages.c:49 +msgid "Fil. sensor [on]" +msgstr "Filamentsensor [an]" + +# MSG_FSENSOR_NA +#: ultralcd.cpp:4164 +msgid "Fil. sensor [N/A]" +msgstr "Filamentsensor [nv]" + +# MSG_FSENSOR_OFF +#: messages.c:48 +msgid "Fil. sensor [off]" +msgstr "Filamentsensor [aus]" + +# MSG_FILAMENT_CLEAN c=20 r=2 +#: messages.c:37 +msgid "Filament extruding & with correct color?" +msgstr "" +"Filament extrudiert\n" +"+ richtige Farbe?" + +# MSG_NOT_LOADED c=19 +#: ultralcd.cpp:2014 +msgid "Filament not loaded" +msgstr "Fil. nicht geladen" + +# MSG_FILAMENT_SENSOR c=20 +#: ultralcd.cpp:7023 +msgid "Filament sensor" +msgstr "Filamentsensor" + +# MSG_SELFTEST_FILAMENT_SENSOR c=18 +#: ultralcd.cpp:7253 +msgid "Filament sensor:" +msgstr "Filamentsensor:" + +# MSG_STATS_FILAMENTUSED c=20 +#: ultralcd.cpp:2142 +msgid "Filament used: " +msgstr "Filamentverbrauch: " + +# MSG_FILE_INCOMPLETE c=20 r=2 +#: ultralcd.cpp:7396 +msgid "File incomplete. Continue anyway?" +msgstr "" +"Datei unvollstaendig\n" +"Trotzdem fortfahren?" + +# MSG_SD_FILE_OPENED +#: cardreader.cpp:395 +msgid "File opened: " +msgstr "Datei geoeffnet: " + +# MSG_SD_FILE_SELECTED +#: cardreader.cpp:401 +msgid "File selected" +msgstr "Datei ausgewaehlt" + +# MSG_FINISHING_MOVEMENTS c=20 r=1 +#: messages.c:45 +msgid "Finishing movements" +msgstr "Bewegung beenden" + +# MSG_V2_CALIBRATION c=17 r=1 +#: ultralcd.cpp:4513 +msgid "First layer cal." +msgstr "Erste-Schicht Kal." + +# MSG_WIZARD_SELFTEST c=20 r=8 +#: ultralcd.cpp:3989 +msgid "First, I will run the selftest to check most common assembly problems." +msgstr "Zunaechst fuehre ich den Selbsttest durch, um die haeufigsten Probleme beim Zusammenbau zu ueberpruefen." + +# MSG_FLOW +#: ultralcd.cpp:5932 +msgid "Flow" +msgstr "Durchfluss" + +# MSG_PRUSA3D_FORUM +#: ultralcd.cpp:1821 +msgid "forum.prusa3d.com" +msgstr "forum.prusa3d.com" + +# MSG_SELFTEST_COOLING_FAN c=20 +#: messages.c:79 +msgid "Front print fan?" +msgstr "Vorderer Luefter?" + +# MSG_BED_CORRECTION_FRONT c=14 r=1 +#: ultralcd.cpp:2565 +msgid "Front side[um]" +msgstr "Vorne [um]" + +# MSG_SELFTEST_FANS +#: ultralcd.cpp:7015 +msgid "Front/left fans" +msgstr "Vorderer/linke Luefter" + +# MSG_SELFTEST_HEATERTHERMISTOR +#: ultralcd.cpp:6945 +msgid "Heater/Thermistor" +msgstr "Heizung/Thermistor" + +# MSG_HEATING +#: messages.c:50 +msgid "Heating" +msgstr "Aufwaermen" + +# MSG_BED_HEATING_SAFETY_DISABLED +#: Marlin_main.cpp:7232 +msgid "Heating disabled by safety timer." +msgstr "" +"Heizung durch\n" +"Sicherheitstimer\n" +"deaktiviert." + +# MSG_HEATING_COMPLETE c=20 +#: messages.c:51 +msgid "Heating done." +msgstr "Aufwaermen OK." + +# MSG_WIZARD_WELCOME c=20 r=7 +#: ultralcd.cpp:3968 +msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?" +msgstr "" +"Hallo, ich bin Ihr\n" +"Original Prusa i3\n" +"Drucker. Moechten\n" +"Sie, dass ich Sie\n" +"durch den Einrich-\n" +"tungsablauf fuehre?" + +# MSG_PRUSA3D_HOWTO +#: ultralcd.cpp:1822 +msgid "howto.prusa3d.com" +msgstr "howto.prusa3d.com" + +# MSG_WIZARD_XYZ_CAL c=20 r=8 +#: ultralcd.cpp:3998 +msgid "I will run xyz calibration now. It will take approx. 12 mins." +msgstr "" +"Ich werde jetzt die\n" +"XYZ-Kalibrierung\n" +"durchfuehren. Es\n" +"wird ca. 12 Minuten\n" +"dauern." + +# MSG_WIZARD_Z_CAL c=20 r=8 +#: ultralcd.cpp:4004 +msgid "I will run z calibration now." +msgstr "Ich werde jetzt die Z Kalibrierung durchfuehren." + +# MSG_WIZARD_V2_CAL_2 c=20 r=12 +#: ultralcd.cpp:4066 +msgid "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration." +msgstr "Ich werde jetzt eine Linie drucken. Waehrend des Druckes koennen Sie die Duese allmaehlich senken, indem Sie den Knopf drehen, bis Sie die optimale Hoehe erreichen. Sehen Sie sich die Bilder in unserem Handbuch im Kapitel Kalibrierung an." + +# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 +#: mesh_bed_calibration.cpp:2469 +msgid "Improving bed calibration point" +msgstr "Verbessere Bett Kalibrierpunkt" + +# MSG_WATCH +#: messages.c:101 +msgid "Info screen" +msgstr "Infoanzeige" + +# MSG_INIT_SDCARD +#: ultralcd.cpp:5785 +msgid "Init. SD card" +msgstr "Init. SD Karte" + +# MSG_INSERT_FILAMENT c=20 +#: ultralcd.cpp:1913 +msgid "Insert filament" +msgstr "Filament einlegen" + +# MSG_FILAMENT_LOADING_T0 c=20 r=4 +#: messages.c:38 +msgid "Insert filament into extruder 1. Click when done." +msgstr "Filament in Extruder 1 einlegen. Klicken wenn fertig." + +# MSG_FILAMENT_LOADING_T1 c=20 r=4 +#: messages.c:39 +msgid "Insert filament into extruder 2. Click when done." +msgstr "Filament in Extruder 2 einlegen. Klicken wenn fertig." + +# MSG_FILAMENT_LOADING_T2 c=20 r=4 +#: messages.c:40 +msgid "Insert filament into extruder 3. Click when done." +msgstr "Filament in Extruder 3 einlegen. Klicken wenn fertig." + +# MSG_FILAMENT_LOADING_T3 c=20 r=4 +#: messages.c:41 +msgid "Insert filament into extruder 4. Click when done." +msgstr "Filament in Extruder 4 einlegen. Klicken wenn fertig." + +# MSG_WIZARD_FILAMENT_LOADED c=20 r=2 +#: ultralcd.cpp:4015 +msgid "Is filament loaded?" +msgstr "Ist das Filament geladen?" + +# MSG_WIZARD_PLA_FILAMENT c=20 r=2 +#: ultralcd.cpp:4060 +msgid "Is it PLA filament?" +msgstr "Ist es wirklich PLA Filament?" + +# MSG_PLA_FILAMENT_LOADED c=20 r=2 +#: ultralcd.cpp:3924 +msgid "Is PLA filament loaded?" +msgstr "Ist PLA Filament geladen?" + +# MSG_STEEL_SHEET_CHECK c=20 r=2 +#: messages.c:94 +msgid "Is steel sheet on heatbed?" +msgstr "" +"Liegt das Stahlblech\n" +"auf dem Heizbett?" + +# MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 +#: mesh_bed_calibration.cpp:2211 +msgid "Iteration " +msgstr "Iteration " + +# MSG_KILLED +#: Marlin_main.cpp:7393 +msgid "KILLED. " +msgstr "ABGEBROCHEN. " + +# MSG_SELFTEST_EXTRUDER_FAN c=20 +#: messages.c:80 +msgid "Left hotend fan?" +msgstr "Linker Luefter?" + +# MSG_BED_CORRECTION_LEFT c=14 r=1 +#: ultralcd.cpp:2563 +msgid "Left side [um]" +msgstr "Links [um]" + +# MSG_LEFT c=12 r=1 +#: ultralcd.cpp:2308 +msgid "Left:" +msgstr "Links:" + +# MSG_BABYSTEP_Z +#: messages.c:14 +msgid "Live adjust Z" +msgstr "Z einstellen" + +# MSG_LOAD_ALL +#: ultralcd.cpp:5392 +msgid "Load all" +msgstr "Alle laden" + +# MSG_LOAD_FILAMENT c=17 +#: messages.c:54 +msgid "Load filament" +msgstr "Filament laden" + +# MSG_LOAD_FILAMENT_1 c=17 +#: ultralcd.cpp:5393 +msgid "Load filament 1" +msgstr "Filament 1 laden" + +# MSG_LOAD_FILAMENT_2 c=17 +#: ultralcd.cpp:5394 +msgid "Load filament 2" +msgstr "Filament 2 laden" + +# MSG_LOAD_FILAMENT_3 c=17 +#: ultralcd.cpp:5395 +msgid "Load filament 3" +msgstr "Filament 3 laden" + +# MSG_LOAD_FILAMENT_4 c=17 +#: ultralcd.cpp:5396 +msgid "Load filament 4" +msgstr "Filament 4 laden" + +# MSG_LOADING_COLOR +#: ultralcd.cpp:1939 +msgid "Loading color" +msgstr "Lade Farbe" + +# MSG_LOADING_FILAMENT c=20 +#: messages.c:55 +msgid "Loading filament" +msgstr "Filament laedt" + +# MSG_LOOSE_PULLEY c=20 r=1 +#: ultralcd.cpp:6999 +msgid "Loose pulley" +msgstr "Lose Riemenscheibe" + +# MSG_M104_INVALID_EXTRUDER +#: Marlin_main.cpp:7506 +msgid "M104 Invalid extruder " +msgstr "M104 Falscher Extruder " + +# MSG_M105_INVALID_EXTRUDER +#: Marlin_main.cpp:7509 +msgid "M105 Invalid extruder " +msgstr "M105 Falscher Extruder " + +# MSG_M109_INVALID_EXTRUDER +#: Marlin_main.cpp:7512 +msgid "M109 Invalid extruder " +msgstr "M109 Falscher Extruder " + +# MSG_M117_V2_CALIBRATION c=25 r=1 +#: messages.c:56 +msgid "M117 First layer cal." +msgstr "M117 Erste-Schicht Kal." + +# MSG_M200_INVALID_EXTRUDER +#: Marlin_main.cpp:5378 +msgid "M200 Invalid extruder " +msgstr "M200 Falscher Extruder " + +# MSG_M218_INVALID_EXTRUDER +#: Marlin_main.cpp:7515 +msgid "M218 Invalid extruder " +msgstr "M218 Falscher Extruder " + +# MSG_M221_INVALID_EXTRUDER +#: Marlin_main.cpp:7518 +msgid "M221 Invalid extruder " +msgstr "M221 Falscher Extruder " + +# MSG_MAIN +#: messages.c:57 +msgid "Main" +msgstr "Hauptmenue" + +# MSG_MARK_FIL c=20 r=8 +#: ultralcd.cpp:3840 +msgid "Mark filament 100mm from extruder body. Click when done." +msgstr "Filament 100mm vom Extrudergehaeuse markieren. Klicken wenn Fertig." + +# MSG_MEASURED_SKEW c=15 r=1 +#: ultralcd.cpp:2335 +msgid "Measured skew:" +msgstr "Schraeglauf:" + +# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 +#: messages.c:58 +msgid "Measuring reference height of calibration point" +msgstr "Messen der Referenzhoehe des Kalibrierpunktes" + +# MSG_MESH_BED_LEVELING +#: ultralcd.cpp:4528 +msgid "Mesh Bed Leveling" +msgstr "Mesh Bett Ausgleich" + +# MSG_STEALTH_MODE_OFF +#: messages.c:92 +msgid "Mode [Normal]" +msgstr "Modus [Normal]" + +# MSG_SILENT_MODE_ON +#: messages.c:91 +msgid "Mode [silent]" +msgstr "Modus [leise]" + +# MSG_STEALTH_MODE_ON +#: messages.c:93 +msgid "Mode [Stealth]" +msgstr "Modus [Stealth]" + +# MSG_AUTO_MODE_ON +#: messages.c:13 +msgid "Mode [auto power]" +msgstr "Modus [Auto Power]" + +# MSG_SILENT_MODE_OFF +#: messages.c:90 +msgid "Mode [high power]" +msgstr "Modus[Hohe Leistung]" + +# MSG_SELFTEST_MOTOR +#: messages.c:87 +msgid "Motor" +msgstr "Motor" + +# MSG_MOVE_AXIS +#: ultralcd.cpp:4142 +msgid "Move axis" +msgstr "Achse bewegen" + +# MSG_MOVE_X +#: ultralcd.cpp:3557 +msgid "Move X" +msgstr "Bewege X" + +# MSG_MOVE_Y +#: ultralcd.cpp:3558 +msgid "Move Y" +msgstr "Bewege Y" + +# MSG_MOVE_Z +#: ultralcd.cpp:3559 +msgid "Move Z" +msgstr "Bewege Z" + +# MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 +#: util.cpp:292 +msgid "New firmware version available:" +msgstr "" +"Neue Firmware-\n" +"Version verfuegbar:" + +# MSG_NO +#: messages.c:61 +msgid "No" +msgstr "Nein" + +# MSG_ERR_NO_CHECKSUM +#: cmdqueue.cpp:456 +msgid "No Checksum with line number, Last Line: " +msgstr "Keine Pruefsumme mit Zeilennummer, Letzte Zeile: " + +# MSG_NO_MOVE +#: Marlin_main.cpp:4394 +msgid "No move." +msgstr "Keine Bewegung." + +# MSG_NO_CARD +#: ultralcd.cpp:5783 +msgid "No SD card" +msgstr "Keine SD Karte" + +# MSG_ERR_NO_THERMISTORS +#: Marlin_main.cpp:4946 +msgid "No thermistors - no temperature" +msgstr "Keine Thermistoren - keine Temperatur" + +# MSG_SELFTEST_NOTCONNECTED +#: ultralcd.cpp:6947 +msgid "Not connected" +msgstr "Nicht angeschlossen" + +# MSG_SELFTEST_FAN_NO c=19 +#: messages.c:83 +msgid "Not spinning" +msgstr "Dreht sich nicht" + +# MSG_WIZARD_V2_CAL c=20 r=8 +#: ultralcd.cpp:4065 +msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface." +msgstr "Jetzt werde ich den Abstand zwischen Duesenspitze und Druckbett kalibrieren." + +# MSG_WIZARD_WILL_PREHEAT c=20 r=4 +#: ultralcd.cpp:4022 +msgid "Now I will preheat nozzle for PLA." +msgstr "Jetzt werde ich die Duese fuer PLA vorheizen." + +# MSG_NOZZLE +#: messages.c:62 +msgid "Nozzle" +msgstr "Duese" + +# MSG_INFO_NOZZLE_FAN c=11 r=1 +#: ultralcd.cpp:1537 +msgid "Nozzle FAN:" +msgstr "Duesen Luefter:" + +# MSG_NOZZLE1 +#: ultralcd.cpp:5995 +msgid "Nozzle2" +msgstr "Duese2" + +# MSG_NOZZLE2 +#: ultralcd.cpp:5998 +msgid "Nozzle3" +msgstr "Duese3" + +# MSG_OK +#: messages.c:63 +msgid "ok" +msgstr "ok" + +# MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 +#: Marlin_main.cpp:1382 +msgid "Old settings found. Default PID, Esteps etc. will be set." +msgstr "" +"Alte Einstellungen\n" +"gefunden. Standard\n" +"PID, E-Steps u.s.w.\n" +"werden gesetzt." + +# MSG_ENDSTOP_OPEN +#: messages.c:30 +msgid "open" +msgstr "offen" + +# MSG_SD_OPEN_FILE_FAIL +#: cardreader.cpp:461 +msgid "open failed, File: " +msgstr "Fehler beim Oeffnen der Datei: " + +# MSG_SD_OPENROOT_FAIL +#: cardreader.cpp:196 +msgid "openRoot failed" +msgstr "Zugriff auf Hauptverzeichnis misslungen" + +# MSG_PAUSE_PRINT +#: ultralcd.cpp:5757 +msgid "Pause print" +msgstr "Druck pausieren" + +# MSG_PICK_Z +#: ultralcd.cpp:3463 +msgid "Pick print" +msgstr "Druck auswaehlen" + +# MSG_PID_RUNNING c=20 r=1 +#: ultralcd.cpp:1366 +msgid "PID cal. " +msgstr "PID Kal. " + +# MSG_PID_FINISHED c=20 r=1 +#: ultralcd.cpp:1372 +msgid "PID cal. finished" +msgstr "PID Kalib. fertig" + +# MSG_PID_EXTRUDER c=17 r=1 +#: ultralcd.cpp:4534 +msgid "PID calibration" +msgstr "PID Kalibrierung" + +# MSG_PINDA_PREHEAT c=20 r=1 +#: ultralcd_implementation_hitachi_HD44780.h:1023 +msgid "PINDA Heating" +msgstr "PINDA erwaermen" + +# MSG_PAPER c=20 r=8 +#: messages.c:64 +msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately." +msgstr "Legen Sie ein Blatt Papier unter die Duese waehrend der Kalibrierung der ersten 4 Punkte. Wenn die Duese das Papier erfasst, den Drucker sofort ausschalten." + +# MSG_SELFTEST_PLEASECHECK +#: ultralcd.cpp:6939 +msgid "Please check :" +msgstr "Bitte pruefe:" + +# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 +#: messages.c:102 +msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer." +msgstr "Bitte lesen Sie unser Handbuch und beheben Sie das Problem. Fahren Sie dann mit dem Assistenten fort, indem Sie den Drucker neu starten." + +# MSG_WIZARD_CLEAN_HEATBED c=20 r=8 +#: ultralcd.cpp:4073 +msgid "Please clean heatbed and then press the knob." +msgstr "Bitte reinigen Sie das Heizbett und druecken Sie dann den Knopf." + +# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 +#: messages.c:23 +msgid "Please clean the nozzle for calibration. Click when done." +msgstr "Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber." + +# MSG_WIZARD_LOAD_FILAMENT c=20 r=8 +#: ultralcd.cpp:4046 +msgid "Please insert PLA filament to the extruder, then press knob to load it." +msgstr "Legen Sie bitte PLA Filament in den Extruder und druecken Sie den Knopf, um es zu laden." + +# MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 +#: ultralcd.cpp:4109 +msgid "Please load PLA filament and then resume Wizard by rebooting the printer." +msgstr "" +"Bitte PLA-Filament\n" +"laden und Assistent\n" +"fortsetzen, indem\n" +"Sie den Drucker neu\n" +"starten." + +# MSG_PLEASE_LOAD_PLA c=20 r=4 +#: ultralcd.cpp:3929 +msgid "Please load PLA filament first." +msgstr "Bitte laden Sie zuerst PLA Filament." + +# MSG_CHECK_IDLER c=20 r=4 +#: Marlin_main.cpp:6166 +msgid "Please open idler and remove filament manually." +msgstr "" +"Bitte Spannrolle\n" +"oeffnen und Fila-\n" +"ment von Hand\n" +"entfernen" + +# MSG_PLACE_STEEL_SHEET c=20 r=4 +#: messages.c:65 +msgid "Please place steel sheet on heatbed." +msgstr "" +"Bitte legen Sie das\n" +"Stahlblech auf das\n" +"Heizbett." + +# MSG_PRESS_TO_UNLOAD c=20 r=4 +#: messages.c:69 +msgid "Please press the knob to unload filament" +msgstr "" +"Bitte druecken Sie\n" +"den Knopf um das \n" +"Filament zu\n" +"entladen." + +# MSG_PULL_OUT_FILAMENT c=20 r=4 +#: messages.c:71 +msgid "Please pull out filament immediately" +msgstr "" +"Bitte ziehen Sie\n" +"das Filament sofort\n" +"heraus" + +# MSG_REMOVE_STEEL_SHEET c=20 r=4 +#: messages.c:75 +msgid "Please remove steel sheet from heatbed." +msgstr "" +"Bitte entfernen Sie\n" +"das Stahlblech vom\n" +"Heizbett." + +# MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 +#: util.cpp:296 +msgid "Please upgrade." +msgstr "Bitte aktualisieren." + +# MSG_PLEASE_WAIT c=20 +#: messages.c:66 +msgid "Please wait" +msgstr "Bitte warten" + +# MSG_POWERUP +#: messages.c:67 +msgid "PowerUp" +msgstr "Einschalten" + +# MSG_PREHEAT +#: ultralcd.cpp:5746 +msgid "Preheat" +msgstr "Vorheizen" + +# MSG_PREHEAT_NOZZLE c=20 +#: messages.c:68 +msgid "Preheat the nozzle!" +msgstr "Duese vorheizen!" + +# MSG_WIZARD_HEATING c=20 r=3 +#: messages.c:104 +msgid "Preheating nozzle. Please wait." +msgstr "" +"Vorheizen der Duese.\n" +"Bitte warten." + +# MSG_PREPARE_FILAMENT c=20 r=1 +#: ultralcd.cpp:1911 +msgid "Prepare new filament" +msgstr "Filam. bereithalten" + +# MSG_PRESS_TO_PREHEAT c=20 r=4 +#: Marlin_main.cpp:6025 +msgid "Press knob to preheat nozzle and continue." +msgstr "" +"Bitte druecken Sie\n" +"den Knopf um die \n" +"Duese vorzuheizen\n" +"und fortzufahren." + +# MSG_PRINT_ABORTED c=20 +#: messages.c:70 +msgid "Print aborted" +msgstr "Druck abgebrochen" + +# MSG_INFO_PRINT_FAN c=11 r=1 +#: ultralcd.cpp:1549 +msgid "Print FAN: " +msgstr "Druckvent.: " + +# MSG_SELFTEST_PRINT_FAN_SPEED c=18 +#: ultralcd.cpp:7247 +msgid "Print fan:" +msgstr "Druckvent.:" + +# MSG_CARD_MENU +#: messages.c:22 +msgid "Print from SD" +msgstr "Drucken von SD" + +# MSG_PRINT_PAUSED c=20 r=1 +#: ultralcd.cpp:642 +msgid "Print paused" +msgstr "Druck pausiert" + +# MSG_STATS_PRINTTIME c=20 +#: ultralcd.cpp:2151 +msgid "Print time: " +msgstr "Druckzeit: " + +# MSG_PRINTER_DISCONNECTED c=20 r=1 +#: ultralcd.cpp:607 +msgid "Printer disconnected" +msgstr "Drucker getrennt" + +# MSG_ERR_KILLED +#: Marlin_main.cpp:7388 +msgid "Printer halted. kill() called!" +msgstr "Printer gestoppt. kill() aufgerufen!" + +# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 +#: messages.c:46 +msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." +msgstr "" +"Drucker wurde noch \n" +"nicht kalibriert.\n" +"Bitte folgen Sie dem\n" +"Handbuch, Kapitel\n" +"Erste Schritte,\n" +"Abschnitt Kalibrie-\n" +"rungsablauf." + +# MSG_ERR_STOPPED +#: messages.c:33 +msgid "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" +msgstr "Drucker aufgrund von Fehlern gestoppt. Fehler beheben und mit M999 neu starten. (Temperatur wird zurueckgesetzt. Nach dem Neustart neu einstellen!)" + +# WELCOME_MSG c=20 +msgid "Prusa i3 MK3 ready." +msgstr "Prusa i3 MK3 bereit." + +# MSG_PRUSA3D +#: ultralcd.cpp:1820 +msgid "prusa3d.com" +msgstr "prusa3d.com" + +# MSG_BED_CORRECTION_REAR c=14 r=1 +#: ultralcd.cpp:2566 +msgid "Rear side [um]" +msgstr "Hinten [um]" + +# MSG_RECOVERING_PRINT c=20 r=1 +#: Marlin_main.cpp:8289 +msgid "Recovering print " +msgstr "Druck wiederherst " + +# MSG_REFRESH +msgid "Refresh" +msgstr "Erneuern" + +# MSG_M119_REPORT +#: Marlin_main.cpp:5297 +msgid "Reporting endstop status" +msgstr "Statusbericht Endanschlag" + +# MSG_RESEND +#: Marlin_main.cpp:6911 +msgid "Resend: " +msgstr "Wiederholen: " + +# MSG_BED_CORRECTION_RESET +#: ultralcd.cpp:2567 +msgid "Reset" +msgstr "Ruecksetzen" + +# MSG_CALIBRATE_BED_RESET +#: ultralcd.cpp:4539 +msgid "Reset XYZ calibr." +msgstr "XYZ Kalibr. zuruecksetzen." + +# MSG_RESUME_PRINT +#: ultralcd.cpp:5761 +msgid "Resume print" +msgstr "Druck fortsetzen" + +# MSG_RESUMING_PRINT c=20 r=1 +#: messages.c:74 +msgid "Resuming print" +msgstr "Druck fortgesetzt" + +# MSG_BED_CORRECTION_RIGHT c=14 r=1 +#: ultralcd.cpp:2564 +msgid "Right side[um]" +msgstr "Rechts [um]" + +# MSG_RIGHT c=12 r=1 +#: ultralcd.cpp:2309 +msgid "Right:" +msgstr "Rechts:" + +# MSG_E_CAL_KNOB c=20 r=8 +#: ultralcd.cpp:3835 +msgid "Rotate knob until mark reaches extruder body. Click when done." +msgstr "Knopf drehen bis die Markierung das Extrudergehaeuse erreicht. Klicken wenn fertig." + +# MSG_SECOND_SERIAL_ON c=17 r=1 +#: ultralcd.cpp:4227 +msgid "RPi port [on]" +msgstr "RPi Port [an]" + +# MSG_SECOND_SERIAL_OFF c=17 r=1 +#: ultralcd.cpp:4224 +msgid "RPi port [off]" +msgstr "RPi Port [aus]" + +# MSG_WIZARD_RERUN c=20 r=7 +#: ultralcd.cpp:3947 +msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?" +msgstr "" +"Der Assistent wird\n" +"die aktuellen\n" +"Kalibrierungsdaten\n" +"loeschen und von\n" +"vorne beginnen.\n" +"Weiterfahren?" + +# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 +#: ultralcd.cpp:4240 +msgid "SD card [normal]" +msgstr "SD Karte [normal]" + +# MSG_SD_CARD_OK +#: cardreader.cpp:202 +msgid "SD card ok" +msgstr "SD Karte ok" + +# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 +#: ultralcd.cpp:4238 +msgid "SD card [FlshAir]" +msgstr "SD Karte [FlashAir]" + +# MSG_SD_INIT_FAIL +#: cardreader.cpp:186 +msgid "SD init fail" +msgstr "SD Init fehlerhaft" + +# MSG_SD_PRINTING_BYTE +#: cardreader.cpp:516 +msgid "SD printing byte " +msgstr "SD drucke Byte " + +# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 +#: messages.c:43 +msgid "Searching bed calibration point" +msgstr "Suche Bett Kalibrierpunkt" + +# MSG_LANGUAGE_SELECT +#: ultralcd.cpp:4235 +msgid "Select language" +msgstr "Waehle Sprache" + +# MSG_SELFTEST_OK +#: ultralcd.cpp:6505 +msgid "Self test OK" +msgstr "Selbsttest OK" + +# MSG_SELFTEST_START c=20 +#: ultralcd.cpp:6342 +msgid "Self test start " +msgstr "Selbsttest start " + +# MSG_SELFTEST +#: ultralcd.cpp:4515 +msgid "Selftest " +msgstr "Selbsttest " + +# MSG_SELFTEST_ERROR +#: ultralcd.cpp:6937 +msgid "Selftest error !" +msgstr "Selbsttest Fehler!" + +# MSG_SELFTEST_FAILED c=20 +#: messages.c:81 +msgid "Selftest failed " +msgstr "Selbsttest misslung " + +# MSG_FORCE_SELFTEST c=20 r=8 +#: Marlin_main.cpp:1414 +msgid "Selftest will be run to calibrate accurate sensorless rehoming." +msgstr "" +"Selbsttest im Gang,\n" +"um die genaue Rueck-\n" +"kehr zum Nullpunkt\n" +"ohne Sensor zu\n" +"kalibrieren" + +# MSG_SET_TEMPERATURE c=19 r=1 +#: ultralcd.cpp:2575 +msgid "Set temperature:" +msgstr "Temp. einstellen:" + +# MSG_SETTINGS +#: messages.c:89 +msgid "Settings" +msgstr "Einstellungen" + +# MSG_SEVERE_SKEW c=15 r=1 +#: ultralcd.cpp:2346 +msgid "Severe skew:" +msgstr "Schwerer Verzug:" + +# MSG_SHOW_END_STOPS c=17 r=1 +#: ultralcd.cpp:4536 +msgid "Show end stops" +msgstr "Endschalter Status" + +# MSG_DWELL +#: Marlin_main.cpp:3281 +msgid "Sleep..." +msgstr "Schlafzustand..." + +# MSG_SLIGHT_SKEW c=15 r=1 +#: ultralcd.cpp:2342 +msgid "Slight skew:" +msgstr "Etwas verzogen:" + +# MSG_FILE_CNT c=20 r=4 +#: cardreader.cpp:754 +msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." +msgstr "" +"Einige Dateien wur-\n" +"den nicht sortiert.\n" +"Max. Dateien pro\n" +"Verzeichnis = 100." + +# MSG_SORT_NONE c=17 r=1 +#: ultralcd.cpp:4250 +msgid "Sort: [None]" +msgstr "Sort.: [Keine]" + +# MSG_SORT_TIME c=17 r=1 +#: ultralcd.cpp:4248 +msgid "Sort: [Time]" +msgstr "Sort.: [Zeit]" + +# MSG_SORT_ALPHA c=17 r=1 +#: ultralcd.cpp:4249 +msgid "Sort: [Alphabet]" +msgstr "Sort.: [Alphab.]" + +# MSG_SORTING c=20 r=1 +#: cardreader.cpp:761 +msgid "Sorting files" +msgstr "Sortiere Dateien" + +# MSG_SPEED +#: ultralcd.cpp:5926 +msgid "Speed" +msgstr "Geschwindigkeit" + +# MSG_SELFTEST_FAN_YES c=19 +#: messages.c:84 +msgid "Spinning" +msgstr "Dreht sich" + +# MSG_TEMP_CAL_WARNING c=20 r=4 +#: Marlin_main.cpp:3551 +msgid "Stable ambient temperature 21-26C is needed a rigid stand is required." +msgstr "" +"Stabile Umgebungs-\n" +"temperatur 21-26C\n" +"und feste Stand-\n" +"flaeche erforderlich" + +# MSG_STATISTICS +#: ultralcd.cpp:5824 +msgid "Statistics " +msgstr "Statistiken " + +# MSG_STEPPER_TOO_HIGH +#: stepper.cpp:345 +msgid "Steprate too high: " +msgstr "Schrittrate zu hoch: " + +# MSG_STOP_PRINT +#: messages.c:95 +msgid "Stop print" +msgstr "Druck abbrechen" + +# MSG_STOPPED +#: messages.c:96 +msgid "STOPPED. " +msgstr "GESTOPPT. " + +# MSG_SUPPORT +#: ultralcd.cpp:5831 +msgid "Support" +msgstr "Support" + +# MSG_SELFTEST_SWAPPED +#: ultralcd.cpp:7017 +msgid "Swapped" +msgstr "Ausgetauscht" + +# MSG_TEMP_CALIBRATION c=20 r=1 +#: messages.c:97 +msgid "Temp. cal. " +msgstr "Temp Kalib. " + +# MSG_TEMP_CALIBRATION_ON c=20 r=1 +#: ultralcd.cpp:4220 +msgid "Temp. cal. [on]" +msgstr "Temp. Kal. [AN]" + +# MSG_TEMP_CALIBRATION_OFF c=20 r=1 +#: ultralcd.cpp:4217 +msgid "Temp. cal. [off]" +msgstr "Temp. Kal. [AUS]" + +# MSG_CALIBRATION_PINDA_MENU c=17 r=1 +#: ultralcd.cpp:4545 +msgid "Temp. calibration" +msgstr "Temp. kalibrieren" + +# MSG_TEMPERATURE +#: ultralcd.cpp:4139 +msgid "Temperature" +msgstr "Temperatur" + +# MSG_TEMP_CAL_FAILED c=20 r=8 +#: ultralcd.cpp:3189 +msgid "Temperature calibration failed" +msgstr "Temperaturkalibrierung fehlgeschlagen" + +# MSG_PINDA_NOT_CALIBRATED c=20 r=4 +#: Marlin_main.cpp:1403 +msgid "Temperature calibration has not been run yet" +msgstr "" +"Temperatur wurde\n" +"noch nicht\n" +"kalibriert" + +# MSG_TEMP_CALIBRATION_DONE c=20 r=12 +#: messages.c:98 +msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal." +msgstr "" +"Temp.kalibrierung\n" +"ist fertig + aktiv.\n" +"Temp.kalibrierung\n" +"kann ausgeschaltet\n" +"werden im Menu\n" +"Einstellungen ->\n" +"Temp.kal." + +# MSG_MENU_TEMPERATURES c=15 r=1 +#: ultralcd.cpp:1846 +msgid "Temperatures" +msgstr "Temperaturen" + +# MSG_STATS_TOTALFILAMENT c=20 +#: ultralcd.cpp:2186 +msgid "Total filament :" +msgstr "Gesamtes Filament:" + +# MSG_STATS_TOTALPRINTTIME c=20 +#: ultralcd.cpp:2203 +msgid "Total print time :" +msgstr "Gesamte Druckzeit:" + +# MSG_ENDSTOP_HIT +#: messages.c:29 +msgid "TRIGGERED" +msgstr "AUSGELOEST" + +# MSG_TUNE +#: ultralcd.cpp:5743 +msgid "Tune" +msgstr "Feineinstellung" + +# MSG_UNLOAD_ALL +#: ultralcd.cpp:5405 +msgid "Unload all" +msgstr "Alles entladen" + +# MSG_UNLOAD_FILAMENT c=17 +#: messages.c:99 +msgid "Unload filament" +msgstr "Filament entladen" + +# MSG_UNLOAD_FILAMENT_1 c=17 +#: ultralcd.cpp:5406 +msgid "Unload filament 1" +msgstr "Filam. 1 entladen" + +# MSG_UNLOAD_FILAMENT_2 c=17 +#: ultralcd.cpp:5407 +msgid "Unload filament 2" +msgstr "Filam. 2 entladen" + +# MSG_UNLOAD_FILAMENT_3 c=17 +#: ultralcd.cpp:5408 +msgid "Unload filament 3" +msgstr "Filam. 3 entladen" + +# MSG_UNLOAD_FILAMENT_4 c=17 +#: ultralcd.cpp:5409 +msgid "Unload filament 4" +msgstr "Filam. 4 entladen" + +# MSG_UNLOADING_FILAMENT c=20 r=1 +#: messages.c:100 +msgid "Unloading filament" +msgstr "Filament auswerfen" + +# MSG_USED c=19 r=1 +#: ultralcd.cpp:4858 +msgid "Used during print" +msgstr "Beim Druck benutzt" + +# MSG_MENU_VOLTAGES c=15 r=1 +#: ultralcd.cpp:1849 +msgid "Voltages" +msgstr "Spannungen" + +# MSG_SD_VOL_INIT_FAIL +#: cardreader.cpp:191 +msgid "volume.init failed" +msgstr "Dateisystem Init fehlerhaft" + +# MSG_USERWAIT +#: Marlin_main.cpp:4359 +msgid "Wait for user..." +msgstr "Warte auf Benutzer.." + +# MSG_WAITING_TEMP c=20 r=3 +#: ultralcd.cpp:2719 +msgid "Waiting for nozzle and bed cooling" +msgstr "" +"Warten bis Heizung\n" +"und Bett abgekuehlt\n" +"sind" + +# MSG_WAITING_TEMP_PINDA c=20 r=3 +#: ultralcd.cpp:2683 +msgid "Waiting for PINDA probe cooling" +msgstr "" +"Warten, bis PINDA-\n" +"Sonde abgekuehlt ist" + +# MSG_CHANGED_BOTH c=20 r=4 +#: Marlin_main.cpp:1374 +msgid "Warning: both printer type and motherboard type changed." +msgstr "" +"Warnung: Druckertyp\n" +"und Platinentyp\n" +"wurden beide\n" +"geaendert." + +# MSG_CHANGED_MOTHERBOARD c=20 r=4 +#: Marlin_main.cpp:1366 +msgid "Warning: motherboard type changed." +msgstr "" +"Warnung: Platinentyp\n" +"wurde geaendert." + +# MSG_CHANGED_PRINTER c=20 r=4 +#: Marlin_main.cpp:1370 +msgid "Warning: printer type changed." +msgstr "" +"Warnung: Druckertyp\n" +"wurde geaendert." + +# MSG_FW_VERSION_UNKNOWN c=20 r=8 +#: Marlin_main.cpp:946 +msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!" +msgstr "" +"WARNUNG: Dies ist\n" +"eine inoffizielle,\n" +"nicht unterstuetzte\n" +"Version. Benutzung\n" +"auf eigene Gefahr!" + +# MSG_UNLOAD_SUCCESSFUL c=20 r=2 +#: Marlin_main.cpp:6165 +msgid "Was filament unload successful?" +msgstr "" +"Konnten Sie das\n" +"Filament entnehmen?" + +# MSG_SELFTEST_WIRINGERROR +#: messages.c:88 +msgid "Wiring error" +msgstr "Verdrahtungsfehler" + +# MSG_WIZARD c=17 r=1 +#: ultralcd.cpp:4512 +msgid "Wizard" +msgstr "Assistent" + +# MSG_SD_WORKDIR_FAIL +#: messages.c:78 +msgid "workDir open failed" +msgstr "Arbeitsverzeichnis oeffnen misslungen" + +# MSG_SD_WRITE_TO_FILE +#: cardreader.cpp:424 +msgid "Writing to file: " +msgstr "Schreibe in Datei: " + +# MSG_XYZ_DETAILS c=19 r=1 +#: ultralcd.cpp:1839 +msgid "XYZ cal. details" +msgstr "XYZ Kal. Details" + +# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 +#: ultralcd.cpp:3159 +msgid "XYZ calibration all right. Skew will be corrected automatically." +msgstr "XYZ Kalibrierung in Ordnung. Schraeglauf wird automatisch korrigiert." + +# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 +#: ultralcd.cpp:3156 +msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!" +msgstr "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schraeg." + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 +#: ultralcd.cpp:3137 +msgid "XYZ calibration compromised. Front calibration points not reachable." +msgstr "XYZ-Kalibrierung beeintraechtigt. Vordere Kalibrierpunkte nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 +#: ultralcd.cpp:3143 +msgid "XYZ calibration compromised. Left front calibration point not reachable." +msgstr "XYZ-Kalibrierung beeintraechtigt. Linker vorderer Kalibrierpunkt nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 +#: ultralcd.cpp:3140 +msgid "XYZ calibration compromised. Right front calibration point not reachable." +msgstr "XYZ-Kalibrierung beeintraechtigt. Rechter vorderer Kalibrierpunkt nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 +#: ultralcd.cpp:3119 +msgid "XYZ calibration failed. Bed calibration point was not found." +msgstr "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 +#: ultralcd.cpp:3125 +msgid "XYZ calibration failed. Front calibration points not reachable." +msgstr "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 +#: ultralcd.cpp:3131 +msgid "XYZ calibration failed. Left front calibration point not reachable." +msgstr "XYZ-Kalibrierung fehlgeschlagen. Linker vorderer Kalibrierpunkt nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 +#: messages.c:20 +msgid "XYZ calibration failed. Please consult the manual." +msgstr "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 +#: ultralcd.cpp:3128 +msgid "XYZ calibration failed. Right front calibration point not reachable." +msgstr "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist nicht erreichbar." + +# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 +#: ultralcd.cpp:3153 +msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" +msgstr "" +"XYZ-Kalibrierung ok.\n" +"X/Y-Achsen sind \n" +"senkrecht zueinander\n" +"Glueckwunsch!" + +# MSG_Y_DISTANCE_FROM_MIN c=20 r=1 +#: ultralcd.cpp:2306 +msgid "Y distance from min:" +msgstr "Y Entfernung vom Min:" + +# MSG_YES +#: messages.c:106 +msgid "Yes" +msgstr "Ja" + +# MSG_FW_VERSION_ALPHA c=20 r=8 +#: Marlin_main.cpp:930 +msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage." +msgstr "" +"Sie benutzen eine\n" +"Alpha Firmware\n" +"Version. Dies ist\n" +"eine Entwicklungs-\n" +"version. Die Ver-\n" +"wendung ist nicht\n" +"empfohlen und kann\n" +"zu Schaeden fuehren." + +# MSG_FW_VERSION_BETA c=20 r=8 +#: Marlin_main.cpp:931 +msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage." +msgstr "" +"Sie benutzen eine\n" +"Beta Firmware\n" +"Version. Dies ist\n" +"eine Entwicklungs-\n" +"version. Die Ver-\n" +"wendung ist nicht\n" +"empfohlen und kann\n" +"zu Schaeden fuehren." + +# MSG_WIZARD_QUIT c=20 r=8 +#: messages.c:105 +msgid "You can always resume the Wizard from Calibration -> Wizard." +msgstr "" +"Sie koennen den\n" +"Assistenten immer\n" +"im Menu neu starten:\n" +"Kalibrierung ->\n" +"Assistent" + +# MSG_MEASURED_OFFSET +#: ultralcd.cpp:2362 +msgid "[0;0] point offset" +msgstr "[0;0] Punktversatz" diff --git a/lang/po_new/es.po b/lang/po_new/es.po new file mode 100644 index 00000000..db609aea --- /dev/null +++ b/lang/po_new/es.po @@ -0,0 +1,1708 @@ +msgid "" +msgstr "" +"Language: es\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" +"X-Generator: PhraseApp (phraseapp.com)\n" + +# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 +#: ultralcd.cpp:3613 +msgid "\e[2JCrash detection can\e[1;0Hbe turned on only in\e[2;0HNormal mode" +msgstr "\e[2JDec. choque\e[1;0Hpuede ser activada solo en\e[2;0HModo normal" + +# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 +#: ultralcd.cpp:3626 +msgid "\e[2JWARNING:\e[1;0HCrash detection\e[2;0Hdisabled in\e[3;0HStealth mode" +msgstr "\e[2JATENCION:\e[1;0HDec. choque\e[2;0Hdesactivada en\e[3;0HModo silencio" + +# MSG_PLANNER_BUFFER_BYTES +#: Marlin_main.cpp:1085 +msgid " PlannerBufferBytes: " +msgstr " PlannerBufferBytes: " + +# MSG_EXTRUDER_CORRECTION_OFF c=6 +#: ultralcd.cpp:6312 +msgid " [off" +msgstr "[inactivo" + +# MSG_ERR_COLD_EXTRUDE_STOP +#: planner.cpp:745 +msgid " cold extrusion prevented" +msgstr "extrusion en frio prevenida" + +# MSG_FREE_MEMORY +#: Marlin_main.cpp:1083 +msgid " Free Memory: " +msgstr "Memoria Libre: " + +# MSG_CONFIGURATION_VER +#: Marlin_main.cpp:1073 +msgid " Last Updated: " +msgstr "Ultima actualizacion: " + +# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 +#: messages.c:44 +msgid " of 4" +msgstr " de 4" + +# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 +#: messages.c:59 +msgid " of 9" +msgstr " de 9" + +# MSG_FACTOR +#: ultralcd.cpp:6008 +msgid " \002 Fact" +msgstr " \002 Fact" + +# MSG_MAX +#: ultralcd.cpp:6007 +msgid " \002 Max" +msgstr " \002 Max" + +# MSG_MIN +#: ultralcd.cpp:6006 +msgid " \002 Min" +msgstr " \002 Min" + +# MSG_BABYSTEPPING_Z c=20 +#: ultralcd.cpp:2487 +msgid "Adjusting Z" +msgstr "Ajustar Z" + +# MSG_ALL c=19 r=1 +#: messages.c:11 +msgid "All" +msgstr "Todos" + +# MSG_SELFTEST_CHECK_ALLCORRECT c=20 +#: ultralcd.cpp:7235 +msgid "All correct " +msgstr "Todo bien" + +# MSG_WIZARD_DONE c=20 r=8 +#: messages.c:103 +msgid "All is done. Happy printing!" +msgstr "Terminado! Feliz impresion!" + +# MSG_PRESS c=20 +#: ultralcd.cpp:1916 +msgid "and press the knob" +msgstr "Haz clic" + +# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 +#: ultralcd.cpp:2803 +msgid "Are left and right Z~carriages all up?" +msgstr "Carros Z izq./der. estan arriba maximo?" + +# MSG_ADJUSTZ +#: ultralcd.cpp:2600 +msgid "Auto adjust Z?" +msgstr "Ajustar Eje Z" + +# MSG_AUTO_HOME +#: messages.c:12 +msgid "Auto home" +msgstr "Llevar al origen" + +# MSG_AUTOLOAD_FILAMENT c=17 +#: ultralcd.cpp:5803 +msgid "AutoLoad filament" +msgstr "Carga automatica de filamento" + +# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 +#: ultralcd.cpp:3642 +msgid "Autoloading filament available only when filament sensor is turned on..." +msgstr "La carga automatica de filamento solo funciona si el sensor de filamento está activado..." + +# MSG_AUTOLOADING_ENABLED c=20 r=4 +#: ultralcd.cpp:2089 +msgid "Autoloading filament is active, just press the knob and insert filament..." +msgstr "La carga automatica de filamento esta activada, pulse el dial e inserte el filamento..." + +# MSG_SELFTEST_AXIS +#: ultralcd.cpp:7009 +msgid "Axis" +msgstr "Eje" + +# MSG_SELFTEST_AXIS_LENGTH +#: ultralcd.cpp:7007 +msgid "Axis length" +msgstr "Longitud del eje" + +# MSG_BABYSTEPPING_X +#: ultralcd.cpp:2481 +msgid "Babystepping X" +msgstr "Micropasos X" + +# MSG_BABYSTEPPING_Y +#: ultralcd.cpp:2484 +msgid "Babystepping Y" +msgstr "Micropasos Y" + +# MSG_BED +#: messages.c:16 +msgid "Bed" +msgstr "Base calefactable " + +# MSG_SELFTEST_BEDHEATER +#: ultralcd.cpp:6951 +msgid "Bed / Heater" +msgstr "Base / Calentador" + +# MSG_BED_DONE +#: messages.c:17 +msgid "Bed done" +msgstr "Base preparada" + +# MSG_BED_HEATING +#: messages.c:18 +msgid "Bed Heating" +msgstr "Calentando Base" + +# MSG_BED_CORRECTION_MENU +#: ultralcd.cpp:4533 +msgid "Bed level correct" +msgstr "Corr. de la cama" + +# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 +#: messages.c:19 +msgid "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset." +msgstr "Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset." + +# MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 +#: Marlin_main.cpp:4031 +msgid "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset." +msgstr "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset." + +# MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 +#: Marlin_main.cpp:4035 +msgid "Bed leveling failed. Sensor triggered too high. Waiting for reset." +msgstr "Nivelacion fallada. Sensor funciona demasiado pronto. Esperando reset." + +# MSG_BEGIN_FILE_LIST +#: Marlin_main.cpp:4405 +msgid "Begin file list" +msgstr "Comienzo lista arch. " + +# MSG_MENU_BELT_STATUS c=15 r=1 +#: ultralcd.cpp:1738 +msgid "Belt status" +msgstr "Estado de la correa" + +# MSG_RECOVER_PRINT c=20 r=2 +#: messages.c:72 +msgid "Blackout occurred. Recover print?" +msgstr "Se fue la luz. ¿Reanudar la impresion?" + +# MSG_CALIBRATE_PINDA c=17 r=1 +#: ultralcd.cpp:3794 +msgid "Calibrate" +msgstr "Calibrar" + +# MSG_CALIBRATE_E c=20 r=1 +#: ultralcd.cpp:4526 +msgid "Calibrate E" +msgstr "Calibrar E" + +# MSG_CALIBRATE_BED +#: ultralcd.cpp:4522 +msgid "Calibrate XYZ" +msgstr "Calibrar XYZ" + +# MSG_HOMEYZ +#: messages.c:52 +msgid "Calibrate Z" +msgstr "Calibrar Z" + +# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 +#: ultralcd.cpp:2756 +msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." +msgstr "Calibrando XYZ. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic." + +# MSG_CALIBRATE_Z_AUTO c=20 r=2 +#: messages.c:21 +msgid "Calibrating Z" +msgstr "Calibrando Z" + +# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 +#: ultralcd.cpp:2756 +msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done." +msgstr "Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic." + +# MSG_MENU_CALIBRATION +#: messages.c:60 +msgid "Calibration" +msgstr "Calibracion" + +# MSG_HOMEYZ_DONE +#: ultralcd_implementation_hitachi_HD44780.h:989 +msgid "Calibration done" +msgstr "Calibracion OK" + +# MSG_SD_CANT_ENTER_SUBDIR +#: cardreader.cpp:679 +msgid "Cannot enter subdir: " +msgstr "Sin acceso subdir: " + +# MSG_SD_CANT_OPEN_SUBDIR +#: cardreader.cpp:97 +msgid "Cannot open subdir" +msgstr "No se puede abrir subdir" + +# MSG_SD_INSERTED +#: ultralcd.cpp:7550 +msgid "Card inserted" +msgstr "Tarjeta insertada" + +# MSG_SD_REMOVED +#: ultralcd.cpp:7556 +msgid "Card removed" +msgstr "Tarjeta retirada" + +# MSG_CHANGE_EXTR c=20 r=1 +#: ultralcd.cpp:5812 +msgid "Change extruder" +msgstr "Cambiar extrusor." + +# MSG_FILAMENTCHANGE +#: messages.c:42 +msgid "Change filament" +msgstr "Cambiar filamento" + +# MSG_CNG_SDCARD +#: ultralcd.cpp:5777 +msgid "Change SD card" +msgstr "Cambiar tarjeta SD" + +# MSG_CHANGE_SUCCESS +#: ultralcd.cpp:1927 +msgid "Change success!" +msgstr "Cambio correcto" + +# MSG_CORRECTLY c=20 +#: ultralcd.cpp:2006 +msgid "Changed correctly?" +msgstr "Cambio correcto?" + +# MSG_CHANGING_FILAMENT c=20 +#: ultralcd.cpp:1899 +msgid "Changing filament!" +msgstr "Cambiando filamento" + +# MSG_SELFTEST_CHECK_BED c=20 +#: messages.c:85 +msgid "Checking bed " +msgstr "Control base cal." + +# MSG_SELFTEST_CHECK_ENDSTOPS c=20 +#: ultralcd.cpp:7226 +msgid "Checking endstops" +msgstr "Control endstops" + +# MSG_SELFTEST_CHECK_HOTEND c=20 +#: ultralcd.cpp:7227 +msgid "Checking hotend " +msgstr "Control fusor" + +# MSG_SELFTEST_CHECK_FSENSOR c=20 +#: messages.c:86 +msgid "Checking sensors " +msgstr "Comprobando los sensores" + +# MSG_SELFTEST_CHECK_X c=20 +#: ultralcd.cpp:7228 +msgid "Checking X axis " +msgstr "Control sensor X" + +# MSG_SELFTEST_CHECK_Y c=20 +#: ultralcd.cpp:7229 +msgid "Checking Y axis " +msgstr "Control sensor Y" + +# MSG_SELFTEST_CHECK_Z c=20 +#: ultralcd.cpp:7230 +msgid "Checking Z axis " +msgstr "Control sensor Z" + +# MSG_ERR_CHECKSUM_MISMATCH +#: cmdqueue.cpp:444 +msgid "checksum mismatch, Last Line: " +msgstr "inconcluencia checksum, Ult. Linea: " + +# MSG_CHOOSE_EXTRUDER c=20 r=1 +#: messages.c:53 +msgid "Choose extruder:" +msgstr "Elegir extrusor:" + +# MSG_NOT_COLOR +#: ultralcd.cpp:2018 +msgid "Color not correct" +msgstr "Color no homogeneo" + +# MSG_COOLDOWN +#: messages.c:24 +msgid "Cooldown" +msgstr "Enfriar" + +# MSG_CRASHDETECT_ON +#: messages.c:28 +msgid "Crash det. [on]" +msgstr "Det. choque [activo]" + +# MSG_CRASHDETECT_NA +#: messages.c:26 +msgid "Crash det. [N/A]" +msgstr "Dec. choque [N/D]" + +# MSG_CRASHDETECT_OFF +#: messages.c:27 +msgid "Crash det. [off]" +msgstr "Det. choque [inactivo]" + +# MSG_CRASH_DETECTED c=20 r=1 +#: messages.c:25 +msgid "Crash detected." +msgstr "Choque detectado." + +# MSG_CURRENT c=19 r=1 +#: ultralcd.cpp:4859 +msgid "Current" +msgstr "Actual" + +# MSG_DATE c=17 r=1 +#: ultralcd.cpp:1828 +msgid "Date:" +msgstr "Fecha:" + +# MSG_DISABLE_STEPPERS +#: ultralcd.cpp:4146 +msgid "Disable steppers" +msgstr "Apagar motores" + +# MSG_BABYSTEP_Z_NOT_SET c=20 r=12 +#: messages.c:15 +msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration." +msgstr "Distancia entre la punta del boquilla y la superficie de la base aun no fijada. Por favor siga el manual, capitulo Primeros Pasos, Calibracion primera capa." + +# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 +#: ultralcd.cpp:4071 +msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?" +msgstr "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?" + +# MSG_CLEAN_NOZZLE_E c=20 r=8 +#: ultralcd.cpp:3890 +msgid "E calibration finished. Please clean the nozzle. Click when done." +msgstr "E calibrado. Limpia nozzle. Haz clic una vez terminado." + +# MSG_EXTRUDER_CORRECTION c=9 +#: ultralcd.cpp:4213 +msgid "E-correct" +msgstr "E-correcion" + +# MSG_END_FILE_LIST +#: Marlin_main.cpp:4407 +msgid "End file list" +msgstr "Fin lista arch. " + +# MSG_SELFTEST_ENDSTOP +#: ultralcd.cpp:6969 +msgid "Endstop" +msgstr "Endstop" + +# MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 +#: ultralcd.cpp:6975 +msgid "Endstop not hit" +msgstr "Endstop no alcanzado" + +# MSG_SELFTEST_ENDSTOPS +#: ultralcd.cpp:6957 +msgid "Endstops" +msgstr "Endstops" + +# MSG_ENDSTOPS_HIT +#: messages.c:31 +msgid "endstops hit: " +msgstr "endstops golpean: " + +# MSG_LANGUAGE_NAME +#: language.c:153 +msgid "English" +msgstr "Espanol" + +# MSG_Enqueing +#: +msgid "enqueing \"" +msgstr "en cola \"" + +# MSG_STACK_ERROR c=20 r=4 +#: ultralcd.cpp:5843 +msgid "Error - static memory has been overwritten" +msgstr "Error - se ha sobre-escrito la memoria estática" + +# MSG_SD_ERR_WRITE_TO_FILE +#: messages.c:76 +msgid "error writing to file" +msgstr "error al escribir arch." + +# MSG_ERROR +#: messages.c:34 +msgid "ERROR:" +msgstr "ERROR:" + +# MSG_FSENS_NOT_RESPONDING c=20 r=4 +#: ultralcd.cpp:3656 +msgid "ERROR: Filament sensor is not responding, please check connection." +msgstr "ERROR: El sensor de filamento no responde, por favor comprueba la conexión." + +# MSG_MOVE_E +#: messages.c:35 +msgid "Extruder" +msgstr "Extruir" + +# MSG_EXTRUDER_1 c=17 r=1 +#: ultralcd.cpp:5417 +msgid "Extruder 1" +msgstr "Extrusor 1" + +# MSG_EXTRUDER_2 c=17 r=1 +#: ultralcd.cpp:5418 +msgid "Extruder 2" +msgstr "Extrusor 2" + +# MSG_EXTRUDER_3 c=17 r=1 +#: ultralcd.cpp:5419 +msgid "Extruder 3" +msgstr "Extrusor 3" + +# MSG_EXTRUDER_4 c=17 r=1 +#: ultralcd.cpp:5420 +msgid "Extruder 4" +msgstr "Extrusor 4" + +# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 +#: ultralcd.cpp:7244 +msgid "Extruder fan:" +msgstr "Ventilador del extrusor:" + +# MSG_INFO_EXTRUDER c=15 r=1 +#: ultralcd.cpp:1840 +msgid "Extruder info" +msgstr "Informacion del extrusor" + +# MSG_FSENS_AUTOLOAD_ON c=17 r=1 +#: ultralcd.cpp:4178 +msgid "F. autoload [on]" +msgstr "Autocarga Fil. [activo]" + +# MSG_FSENS_AUTOLOAD_NA c=17 r=1 +#: messages.c:47 +msgid "F. autoload [N/A]" +msgstr "Autocarga Fil. [N/D]" + +# MSG_FSENS_AUTOLOAD_OFF c=17 r=1 +#: ultralcd.cpp:4181 +msgid "F. autoload [off]" +msgstr "Autocarga f. [inactiva]" + +# MSG_FAN_SPEED c=14 +#: messages.c:36 +msgid "Fan speed" +msgstr "Velocidad Vent." + +# MSG_SELFTEST_FAN c=20 +#: messages.c:82 +msgid "Fan test" +msgstr "Test ventiladores" + +# MSG_FANS_CHECK_ON c=17 r=1 +#: ultralcd.cpp:4189 +msgid "Fans check [on]" +msgstr "Comprobación de ventiladores [activo]" + +# MSG_FANS_CHECK_OFF c=17 r=1 +#: ultralcd.cpp:4192 +msgid "Fans check [off]" +msgstr "Comprobación de ventiladores [inactiva]" + +# MSG_FSENSOR_ON +#: messages.c:49 +msgid "Fil. sensor [on]" +msgstr "Sensor Fil. [activo]" + +# MSG_FSENSOR_NA +#: ultralcd.cpp:4164 +msgid "Fil. sensor [N/A]" +msgstr "Sensor Fil. [N/D]" + +# MSG_FSENSOR_OFF +#: messages.c:48 +msgid "Fil. sensor [off]" +msgstr "Sensor de Fil. [inactivo]" + +# MSG_FILAMENT_CLEAN c=20 r=2 +#: messages.c:37 +msgid "Filament extruding & with correct color?" +msgstr "Es nitido el color nuevo?" + +# MSG_NOT_LOADED c=19 +#: ultralcd.cpp:2014 +msgid "Filament not loaded" +msgstr "Fil. no introducido" + +# MSG_FILAMENT_SENSOR c=20 +#: ultralcd.cpp:7023 +msgid "Filament sensor" +msgstr "Sensor de filamento" + +# MSG_SELFTEST_FILAMENT_SENSOR c=18 +#: ultralcd.cpp:7253 +msgid "Filament sensor:" +msgstr "Sensor de filamento:" + +# MSG_STATS_FILAMENTUSED c=20 +#: ultralcd.cpp:2142 +msgid "Filament used: " +msgstr "Filamento usado: " + +# MSG_FILE_INCOMPLETE c=20 r=2 +#: ultralcd.cpp:7396 +msgid "File incomplete. Continue anyway?" +msgstr "Archivo incompleto. ¿Continuar de todos modos?" + +# MSG_SD_FILE_OPENED +#: cardreader.cpp:395 +msgid "File opened: " +msgstr "Arch. abierto: " + +# MSG_SD_FILE_SELECTED +#: cardreader.cpp:401 +msgid "File selected" +msgstr "Arch. elegido" + +# MSG_FINISHING_MOVEMENTS c=20 r=1 +#: messages.c:45 +msgid "Finishing movements" +msgstr "Term. movimientos" + +# MSG_V2_CALIBRATION c=17 r=1 +#: ultralcd.cpp:4513 +msgid "First layer cal." +msgstr "Cal. primera cap." + +# MSG_WIZARD_SELFTEST c=20 r=8 +#: ultralcd.cpp:3989 +msgid "First, I will run the selftest to check most common assembly problems." +msgstr "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes." + +# MSG_FLOW +#: ultralcd.cpp:5932 +msgid "Flow" +msgstr "Flujo" + +# MSG_PRUSA3D_FORUM +#: ultralcd.cpp:1821 +msgid "forum.prusa3d.com" +msgstr "forum.prusa3d.com" + +# MSG_SELFTEST_COOLING_FAN c=20 +#: messages.c:79 +msgid "Front print fan?" +msgstr "Vent. frontal?" + +# MSG_BED_CORRECTION_FRONT c=14 r=1 +#: ultralcd.cpp:2565 +msgid "Front side[um]" +msgstr "Frontal [um]" + +# MSG_SELFTEST_FANS +#: ultralcd.cpp:7015 +msgid "Front/left fans" +msgstr "Ventiladores frontal/izquierdo" + +# MSG_SELFTEST_HEATERTHERMISTOR +#: ultralcd.cpp:6945 +msgid "Heater/Thermistor" +msgstr "Calentador/Termistor" + +# MSG_HEATING +#: messages.c:50 +msgid "Heating" +msgstr "Calentando..." + +# MSG_BED_HEATING_SAFETY_DISABLED +#: Marlin_main.cpp:7232 +msgid "Heating disabled by safety timer." +msgstr "Calentadores desactivados por el temporizador de seguridad." + +# MSG_HEATING_COMPLETE c=20 +#: messages.c:51 +msgid "Heating done." +msgstr "Calentamiento acabado." + +# MSG_WIZARD_WELCOME c=20 r=7 +#: ultralcd.cpp:3968 +msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?" +msgstr "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?" + +# MSG_PRUSA3D_HOWTO +#: ultralcd.cpp:1822 +msgid "howto.prusa3d.com" +msgstr "howto.prusa3d.com" + +# MSG_WIZARD_XYZ_CAL c=20 r=8 +#: ultralcd.cpp:3998 +msgid "I will run xyz calibration now. It will take approx. 12 mins." +msgstr "Hare la calibracion XYZ. Tardara 12 min. aproximadamente." + +# MSG_WIZARD_Z_CAL c=20 r=8 +#: ultralcd.cpp:4004 +msgid "I will run z calibration now." +msgstr "Voy a hacer Calibracion Z ahora." + +# MSG_WIZARD_V2_CAL_2 c=20 r=12 +#: ultralcd.cpp:4066 +msgid "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration." +msgstr "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el dial, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual." + +# MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 +#: mesh_bed_calibration.cpp:2469 +msgid "Improving bed calibration point" +msgstr "Mejorando punto de calibracion base" + +# MSG_WATCH +#: messages.c:101 +msgid "Info screen" +msgstr "Monitorizar" + +# MSG_INIT_SDCARD +#: ultralcd.cpp:5785 +msgid "Init. SD card" +msgstr "Iniciar tarj. SD" + +# MSG_INSERT_FILAMENT c=20 +#: ultralcd.cpp:1913 +msgid "Insert filament" +msgstr "Introducir filamento" + +# MSG_FILAMENT_LOADING_T0 c=20 r=4 +#: messages.c:38 +msgid "Insert filament into extruder 1. Click when done." +msgstr "Insertar filamento en el extrusor 1. Haz clic una vez terminado." + +# MSG_FILAMENT_LOADING_T1 c=20 r=4 +#: messages.c:39 +msgid "Insert filament into extruder 2. Click when done." +msgstr "Insertar filamento en el extrusor 2. Haz clic una vez terminado." + +# MSG_FILAMENT_LOADING_T2 c=20 r=4 +#: messages.c:40 +msgid "Insert filament into extruder 3. Click when done." +msgstr "Insertar filamento en el extrusor 3. Haz clic una vez terminado." + +# MSG_FILAMENT_LOADING_T3 c=20 r=4 +#: messages.c:41 +msgid "Insert filament into extruder 4. Click when done." +msgstr "Insertar filamento en el extrusor 4. Haz clic una vez terminado." + +# MSG_WIZARD_FILAMENT_LOADED c=20 r=2 +#: ultralcd.cpp:4015 +msgid "Is filament loaded?" +msgstr "Esta el filamento cargado?" + +# MSG_WIZARD_PLA_FILAMENT c=20 r=2 +#: ultralcd.cpp:4060 +msgid "Is it PLA filament?" +msgstr "Es el filamento PLA?" + +# MSG_PLA_FILAMENT_LOADED c=20 r=2 +#: ultralcd.cpp:3924 +msgid "Is PLA filament loaded?" +msgstr "Esta el filamento PLA cargado?" + +# MSG_STEEL_SHEET_CHECK c=20 r=2 +#: messages.c:94 +msgid "Is steel sheet on heatbed?" +msgstr "¿Esta colocada la lamina de acero sobre la base?" + +# MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 +#: mesh_bed_calibration.cpp:2211 +msgid "Iteration " +msgstr "Reiteracion " + +# MSG_KILLED +#: Marlin_main.cpp:7393 +msgid "KILLED. " +msgstr "PARADA DE EMERGENCIA" + +# MSG_SELFTEST_EXTRUDER_FAN c=20 +#: messages.c:80 +msgid "Left hotend fan?" +msgstr "Vent. izquierdo?" + +# MSG_BED_CORRECTION_LEFT c=14 r=1 +#: ultralcd.cpp:2563 +msgid "Left side [um]" +msgstr "Izquierda [um]" + +# MSG_LEFT c=12 r=1 +#: ultralcd.cpp:2308 +msgid "Left:" +msgstr "Izda:" + +# MSG_BABYSTEP_Z +#: messages.c:14 +msgid "Live adjust Z" +msgstr "Micropaso Eje Z" + +# MSG_LOAD_ALL +#: ultralcd.cpp:5392 +msgid "Load all" +msgstr "Intr. todos fil." + +# MSG_LOAD_FILAMENT c=17 +#: messages.c:54 +msgid "Load filament" +msgstr "Introducir filam." + +# MSG_LOAD_FILAMENT_1 c=17 +#: ultralcd.cpp:5393 +msgid "Load filament 1" +msgstr "Introducir fil. 1" + +# MSG_LOAD_FILAMENT_2 c=17 +#: ultralcd.cpp:5394 +msgid "Load filament 2" +msgstr "Introducir fil. 2" + +# MSG_LOAD_FILAMENT_3 c=17 +#: ultralcd.cpp:5395 +msgid "Load filament 3" +msgstr "Introducir fil. 3" + +# MSG_LOAD_FILAMENT_4 c=17 +#: ultralcd.cpp:5396 +msgid "Load filament 4" +msgstr "Introducir fil. 4" + +# MSG_LOADING_COLOR +#: ultralcd.cpp:1939 +msgid "Loading color" +msgstr "Cambiando color" + +# MSG_LOADING_FILAMENT c=20 +#: messages.c:55 +msgid "Loading filament" +msgstr "Introduciendo filam." + +# MSG_LOOSE_PULLEY c=20 r=1 +#: ultralcd.cpp:6999 +msgid "Loose pulley" +msgstr "Polea suelta" + +# MSG_M104_INVALID_EXTRUDER +#: Marlin_main.cpp:7506 +msgid "M104 Invalid extruder " +msgstr "M104 Extrusor invalido" + +# MSG_M105_INVALID_EXTRUDER +#: Marlin_main.cpp:7509 +msgid "M105 Invalid extruder " +msgstr "M105 Extrusor invalido" + +# MSG_M109_INVALID_EXTRUDER +#: Marlin_main.cpp:7512 +msgid "M109 Invalid extruder " +msgstr "M109 Extrusor invalido" + +# MSG_M117_V2_CALIBRATION c=25 r=1 +#: messages.c:56 +msgid "M117 First layer cal." +msgstr "M117 Cal. primera cap." + +# MSG_M200_INVALID_EXTRUDER +#: Marlin_main.cpp:5378 +msgid "M200 Invalid extruder " +msgstr "M200 Extrusor invalido" + +# MSG_M218_INVALID_EXTRUDER +#: Marlin_main.cpp:7515 +msgid "M218 Invalid extruder " +msgstr "M218 Extrusor invalido" + +# MSG_M221_INVALID_EXTRUDER +#: Marlin_main.cpp:7518 +msgid "M221 Invalid extruder " +msgstr "M221 Extrusor invalido" + +# MSG_MAIN +#: messages.c:57 +msgid "Main" +msgstr "Menu principal" + +# MSG_MARK_FIL c=20 r=8 +#: ultralcd.cpp:3840 +msgid "Mark filament 100mm from extruder body. Click when done." +msgstr "Marque el filamento 100 mm por encima del final del extrusor. Haz clic una vez terminado." + +# MSG_MEASURED_SKEW c=15 r=1 +#: ultralcd.cpp:2335 +msgid "Measured skew:" +msgstr "Desviación medida:" + +# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 +#: messages.c:58 +msgid "Measuring reference height of calibration point" +msgstr "Midiendo altura del punto de calibracion" + +# MSG_MESH_BED_LEVELING +#: ultralcd.cpp:4528 +msgid "Mesh Bed Leveling" +msgstr "Nivelación Mesh Level" + +# MSG_STEALTH_MODE_OFF +#: messages.c:92 +msgid "Mode [Normal]" +msgstr "Modo [Normal]" + +# MSG_SILENT_MODE_ON +#: messages.c:91 +msgid "Mode [silent]" +msgstr "Modo [silencio]" + +# MSG_STEALTH_MODE_ON +#: messages.c:93 +msgid "Mode [Stealth]" +msgstr "Modo [Silencio]" + +# MSG_AUTO_MODE_ON +#: messages.c:13 +msgid "Mode [auto power]" +msgstr "Modo [fuerza auto]" + +# MSG_SILENT_MODE_OFF +#: messages.c:90 +msgid "Mode [high power]" +msgstr "Modo [rend.pleno]" + +# MSG_SELFTEST_MOTOR +#: messages.c:87 +msgid "Motor" +msgstr "Motor" + +# MSG_MOVE_AXIS +#: ultralcd.cpp:4142 +msgid "Move axis" +msgstr "Mover ejes" + +# MSG_MOVE_X +#: ultralcd.cpp:3557 +msgid "Move X" +msgstr "Mover X" + +# MSG_MOVE_Y +#: ultralcd.cpp:3558 +msgid "Move Y" +msgstr "Mover Y" + +# MSG_MOVE_Z +#: ultralcd.cpp:3559 +msgid "Move Z" +msgstr "Mover Z" + +# MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 +#: util.cpp:292 +msgid "New firmware version available:" +msgstr "Nuevo firmware disponible:" + +# MSG_NO +#: messages.c:61 +msgid "No" +msgstr "No" + +# MSG_ERR_NO_CHECKSUM +#: cmdqueue.cpp:456 +msgid "No Checksum with line number, Last Line: " +msgstr "Sin Checksum con linea numero, Ult. Linea: " + +# MSG_NO_MOVE +#: Marlin_main.cpp:4394 +msgid "No move." +msgstr "Sin movimiento" + +# MSG_NO_CARD +#: ultralcd.cpp:5783 +msgid "No SD card" +msgstr "No hay tarjeta SD" + +# MSG_ERR_NO_THERMISTORS +#: Marlin_main.cpp:4946 +msgid "No thermistors - no temperature" +msgstr "Sin termistores - sin temperatura" + +# MSG_SELFTEST_NOTCONNECTED +#: ultralcd.cpp:6947 +msgid "Not connected" +msgstr "No hay conexion " + +# MSG_SELFTEST_FAN_NO c=19 +#: messages.c:83 +msgid "Not spinning" +msgstr "Ventilador no gira" + +# MSG_WIZARD_V2_CAL c=20 r=8 +#: ultralcd.cpp:4065 +msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface." +msgstr "Voy a calibrar la distancia entre la punta de la boquilla y la superficie de la base." + +# MSG_WIZARD_WILL_PREHEAT c=20 r=4 +#: ultralcd.cpp:4022 +msgid "Now I will preheat nozzle for PLA." +msgstr "Voy a precalentar la boquilla para PLA ahora." + +# MSG_NOZZLE +#: messages.c:62 +msgid "Nozzle" +msgstr "Boquilla" + +# MSG_INFO_NOZZLE_FAN c=11 r=1 +#: ultralcd.cpp:1537 +msgid "Nozzle FAN:" +msgstr "Ventilador de capa:" + +# MSG_NOZZLE1 +#: ultralcd.cpp:5995 +msgid "Nozzle2" +msgstr "Boquilla2" + +# MSG_NOZZLE2 +#: ultralcd.cpp:5998 +msgid "Nozzle3" +msgstr "Boquilla3" + +# MSG_OK +#: messages.c:63 +msgid "ok" +msgstr "ok" + +# MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 +#: Marlin_main.cpp:1382 +msgid "Old settings found. Default PID, Esteps etc. will be set." +msgstr "Se han encontrado ajustes anteriores. Se ajustará el PID, los pasos del extrusor, etc" + +# MSG_ENDSTOP_OPEN +#: messages.c:30 +msgid "open" +msgstr "abrir" + +# MSG_SD_OPEN_FILE_FAIL +#: cardreader.cpp:461 +msgid "open failed, File: " +msgstr "error apertura, Arch.: " + +# MSG_SD_OPENROOT_FAIL +#: cardreader.cpp:196 +msgid "openRoot failed" +msgstr "fallo openRoot " + +# MSG_PAUSE_PRINT +#: ultralcd.cpp:5757 +msgid "Pause print" +msgstr "Pausar impresion" + +# MSG_PICK_Z +#: ultralcd.cpp:3463 +msgid "Pick print" +msgstr "Esc. Modelo Adecuado" + +# MSG_PID_RUNNING c=20 r=1 +#: ultralcd.cpp:1366 +msgid "PID cal. " +msgstr "Cal. PID " + +# MSG_PID_FINISHED c=20 r=1 +#: ultralcd.cpp:1372 +msgid "PID cal. finished" +msgstr "Cal. PID terminada" + +# MSG_PID_EXTRUDER c=17 r=1 +#: ultralcd.cpp:4534 +msgid "PID calibration" +msgstr "Calibracion PID" + +# MSG_PINDA_PREHEAT c=20 r=1 +#: ultralcd_implementation_hitachi_HD44780.h:1023 +msgid "PINDA Heating" +msgstr "Calentando PINDA" + +# MSG_PAPER c=20 r=8 +#: messages.c:64 +msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately." +msgstr "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente." + +# MSG_SELFTEST_PLEASECHECK +#: ultralcd.cpp:6939 +msgid "Please check :" +msgstr "Controla :" + +# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 +#: messages.c:102 +msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer." +msgstr "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard" + +# MSG_WIZARD_CLEAN_HEATBED c=20 r=8 +#: ultralcd.cpp:4073 +msgid "Please clean heatbed and then press the knob." +msgstr "Limpia la superficie de la base, por favor, y haz clic" + +# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 +#: messages.c:23 +msgid "Please clean the nozzle for calibration. Click when done." +msgstr "Limpia boquilla para calibracion. Click cuando acabes." + +# MSG_WIZARD_LOAD_FILAMENT c=20 r=8 +#: ultralcd.cpp:4046 +msgid "Please insert PLA filament to the extruder, then press knob to load it." +msgstr "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo." + +# MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 +#: ultralcd.cpp:4109 +msgid "Please load PLA filament and then resume Wizard by rebooting the printer." +msgstr "Carga filamento PLA, por favor, y reinicia la impresora para continuar con el Wizard" + +# MSG_PLEASE_LOAD_PLA c=20 r=4 +#: ultralcd.cpp:3929 +msgid "Please load PLA filament first." +msgstr "Carga el filamento PLA primero por favor." + +# MSG_CHECK_IDLER c=20 r=4 +#: Marlin_main.cpp:6166 +msgid "Please open idler and remove filament manually." +msgstr "Por favor abate el rodillo de empuje (idler) y retira el filamento manualmente." + +# MSG_PLACE_STEEL_SHEET c=20 r=4 +#: messages.c:65 +msgid "Please place steel sheet on heatbed." +msgstr "Por favor coloca la chapa de acero en la base calefactable." + +# MSG_PRESS_TO_UNLOAD c=20 r=4 +#: messages.c:69 +msgid "Please press the knob to unload filament" +msgstr "Por favor, pulsa el dial para descargar el filamento" + +# MSG_PULL_OUT_FILAMENT c=20 r=4 +#: messages.c:71 +msgid "Please pull out filament immediately" +msgstr "Por favor retire el filamento de inmediato" + +# MSG_REMOVE_STEEL_SHEET c=20 r=4 +#: messages.c:75 +msgid "Please remove steel sheet from heatbed." +msgstr "Por favor retire la chapa de acero de la base calefactable." + +# MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 +#: util.cpp:296 +msgid "Please upgrade." +msgstr "Actualize por favor" + +# MSG_PLEASE_WAIT c=20 +#: messages.c:66 +msgid "Please wait" +msgstr "Por Favor Espere" + +# MSG_POWERUP +#: messages.c:67 +msgid "PowerUp" +msgstr "Encendido" + +# MSG_PREHEAT +#: ultralcd.cpp:5746 +msgid "Preheat" +msgstr "Precalentar" + +# MSG_PREHEAT_NOZZLE c=20 +#: messages.c:68 +msgid "Preheat the nozzle!" +msgstr "Precalienta extrusor!" + +# MSG_WIZARD_HEATING c=20 r=3 +#: messages.c:104 +msgid "Preheating nozzle. Please wait." +msgstr "Precalentando nozzle. Espera por favor." + +# MSG_PREPARE_FILAMENT c=20 r=1 +#: ultralcd.cpp:1911 +msgid "Prepare new filament" +msgstr "Preparar filamento" + +# MSG_PRESS_TO_PREHEAT c=20 r=4 +#: Marlin_main.cpp:6025 +msgid "Press knob to preheat nozzle and continue." +msgstr "Pulsa el dial para precalentar la boquilla y continue." + +# MSG_PRINT_ABORTED c=20 +#: messages.c:70 +msgid "Print aborted" +msgstr "Impresion cancelada" + +# MSG_SELFTEST_PRINT_FAN_SPEED c=18 +#: ultralcd.cpp:7247 +msgid "Print fan:" +msgstr "Ventilador del fusor:" + +# MSG_INFO_PRINT_FAN c=11 r=1 +#: ultralcd.cpp:1549 +msgid "Print FAN: " +msgstr "Ventilador del fusor:" + +# MSG_CARD_MENU +#: messages.c:22 +msgid "Print from SD" +msgstr "Menu tarjeta SD" + +# MSG_PRINT_PAUSED c=20 r=1 +#: ultralcd.cpp:642 +msgid "Print paused" +msgstr "Impresion en pausa" + +# MSG_STATS_PRINTTIME c=20 +#: ultralcd.cpp:2151 +msgid "Print time: " +msgstr "Tiempo de imp.:" + +# MSG_PRINTER_DISCONNECTED c=20 r=1 +#: ultralcd.cpp:607 +msgid "Printer disconnected" +msgstr "Impresora desconectada" + +# MSG_ERR_KILLED +#: Marlin_main.cpp:7388 +msgid "Printer halted. kill() called!" +msgstr "Impresora detenida. kill() activado!" + +# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 +#: messages.c:46 +msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." +msgstr "Impresora no esta \ncalibrada todavia. \nPor favor usa el manual\ncapitulo Primeros pasos\nCalibracion flujo." + +# MSG_ERR_STOPPED +#: messages.c:33 +msgid "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" +msgstr "Impresora parada debido a errores. Arregle el error y use M999 para reinicio. (Temperatura se resetea. Ajustar despues de reinicio)" + +# WELCOME_MSG c=20 +#: +msgid "Prusa i3 MK3 ready." +msgstr "Prusa i3 MK3 prep." + +# MSG_PRUSA3D +#: ultralcd.cpp:1820 +msgid "prusa3d.com" +msgstr "prusa3d.es" + +# MSG_BED_CORRECTION_REAR c=14 r=1 +#: ultralcd.cpp:2566 +msgid "Rear side [um]" +msgstr "Trasera [um]" + +# MSG_RECOVERING_PRINT c=20 r=1 +#: Marlin_main.cpp:8289 +msgid "Recovering print " +msgstr "Recuperando impresión" + +# MSG_REFRESH +#: +msgid "Refresh" +msgstr "Refrescar" + +# MSG_M119_REPORT +#: Marlin_main.cpp:5297 +msgid "Reporting endstop status" +msgstr "Estado endstop" + +# MSG_RESEND +#: Marlin_main.cpp:6911 +msgid "Resend: " +msgstr "Reenviar: " + +# MSG_BED_CORRECTION_RESET +#: ultralcd.cpp:2567 +msgid "Reset" +msgstr "Reset" + +# MSG_CALIBRATE_BED_RESET +#: ultralcd.cpp:4539 +msgid "Reset XYZ calibr." +msgstr "Reset XYZ calibr." + +# MSG_RESUME_PRINT +#: ultralcd.cpp:5761 +msgid "Resume print" +msgstr "Reanudar impres." + +# MSG_RESUMING_PRINT c=20 r=1 +#: messages.c:74 +msgid "Resuming print" +msgstr "Resumiendo impresion" + +# MSG_BED_CORRECTION_RIGHT c=14 r=1 +#: ultralcd.cpp:2564 +msgid "Right side[um]" +msgstr "Derecha [um]" + +# MSG_RIGHT c=12 r=1 +#: ultralcd.cpp:2309 +msgid "Right:" +msgstr "Der:" + +# MSG_E_CAL_KNOB c=20 r=8 +#: ultralcd.cpp:3835 +msgid "Rotate knob until mark reaches extruder body. Click when done." +msgstr "Rotar el dial hasta que la marca llegue al cuerpo del extrusor. Haz clic una vez terminado." + +# MSG_SECOND_SERIAL_ON c=17 r=1 +#: ultralcd.cpp:4227 +msgid "RPi port [on]" +msgstr "Puerto RPi [activo]" + +# MSG_SECOND_SERIAL_OFF c=17 r=1 +#: ultralcd.cpp:4224 +msgid "RPi port [off]" +msgstr "Puerto RPi [inactivo]" + +# MSG_WIZARD_RERUN c=20 r=7 +#: ultralcd.cpp:3947 +msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?" +msgstr "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?" + +# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 +#: ultralcd.cpp:4240 +msgid "SD card [normal]" +msgstr "Tarj. SD [normal]" + +# MSG_SD_CARD_OK +#: cardreader.cpp:202 +msgid "SD card ok" +msgstr "Tarj. SD ok" + +# MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 +#: ultralcd.cpp:4238 +msgid "SD card [FlshAir]" +msgstr "Tarj. SD [FlshAir]" + +# MSG_SD_INIT_FAIL +#: cardreader.cpp:186 +msgid "SD init fail" +msgstr "Error init SD" + +# MSG_SD_PRINTING_BYTE +#: cardreader.cpp:516 +msgid "SD printing byte " +msgstr "SD byte impresion" + +# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 +#: messages.c:43 +msgid "Searching bed calibration point" +msgstr "Buscando punto de calibracion base" + +# MSG_LANGUAGE_SELECT +#: ultralcd.cpp:4235 +msgid "Select language" +msgstr "Cambiar el idioma" + +# MSG_SELFTEST_OK +#: ultralcd.cpp:6505 +msgid "Self test OK" +msgstr "Self test OK" + +# MSG_SELFTEST_START c=20 +#: ultralcd.cpp:6342 +msgid "Self test start " +msgstr "Iniciar Selftest" + +# MSG_SELFTEST +#: ultralcd.cpp:4515 +msgid "Selftest " +msgstr "Selftest" + +# MSG_SELFTEST_ERROR +#: ultralcd.cpp:6937 +msgid "Selftest error !" +msgstr "Error Selftest !" + +# MSG_SELFTEST_FAILED c=20 +#: messages.c:81 +msgid "Selftest failed " +msgstr "Fallo Selftest" + +# MSG_FORCE_SELFTEST c=20 r=8 +#: Marlin_main.cpp:1414 +msgid "Selftest will be run to calibrate accurate sensorless rehoming." +msgstr "Se realizará el auto-test para calibrar con precisión la vuelta a la posición inicial sin sensores." + +# MSG_SET_TEMPERATURE c=19 r=1 +#: ultralcd.cpp:2575 +msgid "Set temperature:" +msgstr "Establecer temp.:" + +# MSG_SETTINGS +#: messages.c:89 +msgid "Settings" +msgstr "Configuracion" + +# MSG_SEVERE_SKEW c=15 r=1 +#: ultralcd.cpp:2346 +msgid "Severe skew:" +msgstr "Inclinación severa:" + +# MSG_SHOW_END_STOPS c=17 r=1 +#: ultralcd.cpp:4536 +msgid "Show end stops" +msgstr "Mostrar endstops" + +# MSG_DWELL +#: Marlin_main.cpp:3281 +msgid "Sleep..." +msgstr "En reposo..." + +# MSG_SLIGHT_SKEW c=15 r=1 +#: ultralcd.cpp:2342 +msgid "Slight skew:" +msgstr "Ligeramente inclinado:" + +# MSG_FILE_CNT c=20 r=4 +#: cardreader.cpp:754 +msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." +msgstr "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. " + +# MSG_SORT_NONE c=17 r=1 +#: ultralcd.cpp:4250 +msgid "Sort: [None]" +msgstr "Ordena: [Ninguno]" + +# MSG_SORT_TIME c=17 r=1 +#: ultralcd.cpp:4248 +msgid "Sort: [Time]" +msgstr "Orden: [Fecha]" + +# MSG_SORT_ALPHA c=17 r=1 +#: ultralcd.cpp:4249 +msgid "Sort: [Alphabet]" +msgstr "Orden: [Alfabético]" + +# MSG_SORTING c=20 r=1 +#: cardreader.cpp:761 +msgid "Sorting files" +msgstr "Ordenando archivos" + +# MSG_SPEED +#: ultralcd.cpp:5926 +msgid "Speed" +msgstr "Velocidad" + +# MSG_SELFTEST_FAN_YES c=19 +#: messages.c:84 +msgid "Spinning" +msgstr "Ventilador girando" + +# MSG_TEMP_CAL_WARNING c=20 r=4 +#: Marlin_main.cpp:3551 +msgid "Stable ambient temperature 21-26C is needed a rigid stand is required." +msgstr "Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido." + +# MSG_STATISTICS +#: ultralcd.cpp:5824 +msgid "Statistics " +msgstr "Estadisticas " + +# MSG_STEPPER_TOO_HIGH +#: stepper.cpp:345 +msgid "Steprate too high: " +msgstr "Pasos muy altos: " + +# MSG_STOP_PRINT +#: messages.c:95 +msgid "Stop print" +msgstr "Detener impresion" + +# MSG_STOPPED +#: messages.c:96 +msgid "STOPPED. " +msgstr "PARADA" + +# MSG_SUPPORT +#: ultralcd.cpp:5831 +msgid "Support" +msgstr "Soporte" + +# MSG_SELFTEST_SWAPPED +#: ultralcd.cpp:7017 +msgid "Swapped" +msgstr "Intercambiado" + +# MSG_TEMP_CALIBRATION c=20 r=1 +#: messages.c:97 +msgid "Temp. cal. " +msgstr "Cal. temp. " + +# MSG_TEMP_CALIBRATION_ON c=20 r=1 +#: ultralcd.cpp:4220 +msgid "Temp. cal. [on]" +msgstr "Cal. temp. [ON]" + +# MSG_TEMP_CALIBRATION_OFF c=20 r=1 +#: ultralcd.cpp:4217 +msgid "Temp. cal. [off]" +msgstr "Cal. temp. [OFF]" + +# MSG_CALIBRATION_PINDA_MENU c=17 r=1 +#: ultralcd.cpp:4545 +msgid "Temp. calibration" +msgstr "Calibracion temp." + +# MSG_TEMPERATURE +#: ultralcd.cpp:4139 +msgid "Temperature" +msgstr "Temperatura" + +# MSG_TEMP_CAL_FAILED c=20 r=8 +#: ultralcd.cpp:3189 +msgid "Temperature calibration failed" +msgstr "Fallo de la calibracion de temperatura" + +# MSG_PINDA_NOT_CALIBRATED c=20 r=4 +#: Marlin_main.cpp:1403 +msgid "Temperature calibration has not been run yet" +msgstr "La temperatura de calibracion no ha sido ajustada" + +# MSG_TEMP_CALIBRATION_DONE c=20 r=12 +#: messages.c:98 +msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal." +msgstr "Calibracion temperatura terminada. Haz clic para continuar." + +# MSG_MENU_TEMPERATURES c=15 r=1 +#: ultralcd.cpp:1846 +msgid "Temperatures" +msgstr "Temperaturas" + +# MSG_STATS_TOTALFILAMENT c=20 +#: ultralcd.cpp:2186 +msgid "Total filament :" +msgstr "Filamento total:" + +# MSG_STATS_TOTALPRINTTIME c=20 +#: ultralcd.cpp:2203 +msgid "Total print time :" +msgstr "Tiempo total :" + +# MSG_ENDSTOP_HIT +#: messages.c:29 +msgid "TRIGGERED" +msgstr "ACTIVADO" + +# MSG_TUNE +#: ultralcd.cpp:5743 +msgid "Tune" +msgstr "Ajustar" + +# MSG_UNLOAD_ALL +#: ultralcd.cpp:5405 +msgid "Unload all" +msgstr "Soltar todos fil." + +# MSG_UNLOAD_FILAMENT c=17 +#: messages.c:99 +msgid "Unload filament" +msgstr "Soltar filamento" + +# MSG_UNLOAD_FILAMENT_1 c=17 +#: ultralcd.cpp:5406 +msgid "Unload filament 1" +msgstr "Soltar fil. 1" + +# MSG_UNLOAD_FILAMENT_2 c=17 +#: ultralcd.cpp:5407 +msgid "Unload filament 2" +msgstr "Soltar fil. 2" + +# MSG_UNLOAD_FILAMENT_3 c=17 +#: ultralcd.cpp:5408 +msgid "Unload filament 3" +msgstr "Soltar fil. 3" + +# MSG_UNLOAD_FILAMENT_4 c=17 +#: ultralcd.cpp:5409 +msgid "Unload filament 4" +msgstr "Soltar fil. 4" + +# MSG_UNLOADING_FILAMENT c=20 r=1 +#: messages.c:100 +msgid "Unloading filament" +msgstr "Soltando filamento" + +# MSG_USED c=19 r=1 +#: ultralcd.cpp:4858 +msgid "Used during print" +msgstr "Usado en impresion" + +# MSG_MENU_VOLTAGES c=15 r=1 +#: ultralcd.cpp:1849 +msgid "Voltages" +msgstr "Voltajes" + +# MSG_SD_VOL_INIT_FAIL +#: cardreader.cpp:191 +msgid "volume.init failed" +msgstr "fallo volume.init \n" + +# MSG_USERWAIT +#: Marlin_main.cpp:4359 +msgid "Wait for user..." +msgstr "Esperando ordenes" + +# MSG_WAITING_TEMP c=20 r=3 +#: ultralcd.cpp:2719 +msgid "Waiting for nozzle and bed cooling" +msgstr "Esperando enfriamiento de la base y extrusor." + +# MSG_WAITING_TEMP_PINDA c=20 r=3 +#: ultralcd.cpp:2683 +msgid "Waiting for PINDA probe cooling" +msgstr "Esperando a que se enfríe la sonda PINDA" + +# MSG_CHANGED_BOTH c=20 r=4 +#: Marlin_main.cpp:1374 +msgid "Warning: both printer type and motherboard type changed." +msgstr "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado." + +# MSG_CHANGED_MOTHERBOARD c=20 r=4 +#: Marlin_main.cpp:1366 +msgid "Warning: motherboard type changed." +msgstr "Cuidado: el tipo de placa ha cambiado." + +# MSG_CHANGED_PRINTER c=20 r=4 +#: Marlin_main.cpp:1370 +msgid "Warning: printer type changed." +msgstr "Cuidado: Ha cambiado el tipo de impresora." + +# MSG_FW_VERSION_UNKNOWN c=20 r=8 +#: Marlin_main.cpp:946 +msgid "WARNING: This is an unofficial, unsupported build. Use at your own risk!" +msgstr "CUIDADO: Esta es una version no-oficial y sin soporte. ¡Usala bajo tu responsabilidad!" + +# MSG_UNLOAD_SUCCESSFUL c=20 r=2 +#: Marlin_main.cpp:6165 +msgid "Was filament unload successful?" +msgstr "¿Se cargocon exito el filamento?" + +# MSG_SELFTEST_WIRINGERROR +#: messages.c:88 +msgid "Wiring error" +msgstr "Error de conexion" + +# MSG_WIZARD c=17 r=1 +#: ultralcd.cpp:4512 +msgid "Wizard" +msgstr "Wizard" + +# MSG_SD_WORKDIR_FAIL +#: messages.c:78 +msgid "workDir open failed" +msgstr "error al abrir workDir" + +# MSG_SD_WRITE_TO_FILE +#: cardreader.cpp:424 +msgid "Writing to file: " +msgstr "Escribiendo al arch.: " + +# MSG_XYZ_DETAILS c=19 r=1 +#: ultralcd.cpp:1839 +msgid "XYZ cal. details" +msgstr "Detalles de calibracion XYZ" + +# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 +#: ultralcd.cpp:3159 +msgid "XYZ calibration all right. Skew will be corrected automatically." +msgstr "Calibracion XYZ correcta. La inclinacion se corregira automaticamente." + +# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 +#: ultralcd.cpp:3156 +msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!" +msgstr "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!" + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 +#: ultralcd.cpp:3137 +msgid "XYZ calibration compromised. Front calibration points not reachable." +msgstr "Calibrazion XYZ comprometida. Puntos frontales no alcanzables." + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 +#: ultralcd.cpp:3143 +msgid "XYZ calibration compromised. Left front calibration point not reachable." +msgstr "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable." + +# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 +#: ultralcd.cpp:3140 +msgid "XYZ calibration compromised. Right front calibration point not reachable." +msgstr "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable." + +# MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 +#: ultralcd.cpp:3119 +msgid "XYZ calibration failed. Bed calibration point was not found." +msgstr "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 +#: ultralcd.cpp:3125 +msgid "XYZ calibration failed. Front calibration points not reachable." +msgstr "Calibracion XYZ fallada. Puntos frontales no alcanzables." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 +#: ultralcd.cpp:3131 +msgid "XYZ calibration failed. Left front calibration point not reachable." +msgstr "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable." + +# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 +#: messages.c:20 +msgid "XYZ calibration failed. Please consult the manual." +msgstr "Calibracion XYZ fallada. Consulta el manual por favor." + +# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 +#: ultralcd.cpp:3128 +msgid "XYZ calibration failed. Right front calibration point not reachable." +msgstr "Calibracion XYZ fallad. Punto frontal derecho no alcanzable." + +# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 +#: ultralcd.cpp:3153 +msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!" +msgstr "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!" + +# MSG_Y_DISTANCE_FROM_MIN c=20 r=1 +#: ultralcd.cpp:2306 +msgid "Y distance from min:" +msgstr "Distancia en Y desde el min:" + +# MSG_YES +#: messages.c:106 +msgid "Yes" +msgstr "Si" + +# MSG_FW_VERSION_ALPHA c=20 r=8 +#: Marlin_main.cpp:930 +msgid "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage." +msgstr "Estas usando una version alpha de firmware. Esta es una version de desarrollo. No recomendamos usar esta version y podria causar daños a la impresora." + +# MSG_FW_VERSION_BETA c=20 r=8 +#: Marlin_main.cpp:931 +msgid "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage." +msgstr "Estás usando una versión beta de firmware. Es una versión en desarrollo. No recomendamos que la uses y podría causar daños a la impresora." + +# MSG_WIZARD_QUIT c=20 r=8 +#: messages.c:105 +msgid "You can always resume the Wizard from Calibration -> Wizard." +msgstr "Siempre puedes acceder al asistente desde Calibracion -> Wizard" + +# MSG_MEASURED_OFFSET +#: ultralcd.cpp:2362 +msgid "[0;0] point offset" +msgstr "[0;0] punto offset" diff --git a/lang/po_new/merge_lang.sh b/lang/po_new/merge_lang.sh new file mode 100644 index 00000000..23f73b45 --- /dev/null +++ b/lang/po_new/merge_lang.sh @@ -0,0 +1,28 @@ +#!/bin/sh +# +# + +LANG=$1 +if [ -z "$LANG" ]; then exit -1; fi + +#convert '\\e' sequencies to 'x1b' and '\\' to '\' +cat $LANG.po | sed 's/\\\\e/\\x1b/g;s/\\\\/\\/g' > $LANG'_filtered.po' + +#join lines with multi-line string constants +cat $LANG'_filtered.po' | sed ':a;N;$!ba;s/\x22\n\x22//g' > $LANG'_new.po' + +#generate dictionary +cat ../lang_en.txt | sed 's/\\/\\\\/g' | while read -r s; do + /bin/echo -e "$s" + if [ "${s:0:1}" = "\"" ]; then +# /bin/echo -e "$s" + s=$(/bin/echo -e "$s") + s2=$(grep -F -A1 -B0 "$s" "$LANG"_new.po | tail -n1 | sed 's/^msgstr //') + if [ -z "$s2" ]; then + echo '"\x00"' + else + echo "$s2" + fi +# echo + fi +done > lang_$LANG.txt