Merge remote-tracking branch 'remotes/upstream/MK3' into MK3_stepper_lowres
This commit is contained in:
bubnikv
commit
5deee8f42c
16 changed files with 311 additions and 96 deletions
|
|
@ -8,11 +8,12 @@
|
|||
#define STR(x) STR_HELPER(x)
|
||||
|
||||
// Firmware version
|
||||
#define FW_VERSION "3.1.1-RC4"
|
||||
#define FW_COMMIT_NR 145
|
||||
#define FW_VERSION "3.1.1-RC5"
|
||||
#define FW_COMMIT_NR 150
|
||||
#define FW_DEV_VERSION FW_VERSION_RC
|
||||
#define FW_VERSION_FULL FW_VERSION "-" STR(FW_COMMIT_NR)
|
||||
|
||||
#define FW_VERSION_DEBUG 5
|
||||
#define FW_VERSION_UNKNOWN 4
|
||||
#define FW_VERSION_ALPHA 3
|
||||
#define FW_VERSION_BETA 2
|
||||
|
|
|
|||
|
|
@ -311,6 +311,8 @@ void Config_RetrieveSettings(uint16_t offset, uint8_t level)
|
|||
EEPROM_READ_VAR(i,max_jerk[Y_AXIS]);
|
||||
EEPROM_READ_VAR(i,max_jerk[Z_AXIS]);
|
||||
EEPROM_READ_VAR(i,max_jerk[E_AXIS]);
|
||||
if (max_jerk[X_AXIS] > DEFAULT_XJERK) max_jerk[X_AXIS] = DEFAULT_XJERK;
|
||||
if (max_jerk[Y_AXIS] > DEFAULT_YJERK) max_jerk[Y_AXIS] = DEFAULT_YJERK;
|
||||
EEPROM_READ_VAR(i,add_homing);
|
||||
#ifndef ULTIPANEL
|
||||
int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed;
|
||||
|
|
|
|||
|
|
@ -75,12 +75,17 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|||
#define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
|
||||
|
||||
//Silent mode limits
|
||||
#define SILENT_MAX_ACCEL_X 960 // X-axis max acceleration in silent mode in mm/s^2
|
||||
#define SILENT_MAX_ACCEL_Y 960 // Y-axis max axxeleration in silent mode in mm/s^2
|
||||
#define SILENT_MAX_ACCEL_X_ST (100*SILENT_MAX_ACCEL_X) // X max accel in steps/s^2
|
||||
#define SILENT_MAX_ACCEL_Y_ST (100*SILENT_MAX_ACCEL_Y) // Y max accel in steps/s^2
|
||||
#define SILENT_MAX_ACCEL 960 // max axxeleration in silent mode in mm/s^2
|
||||
#define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define SILENT_MAX_FEEDRATE 172 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//Normal mode limits
|
||||
#define NORMAL_MAX_ACCEL 2500 // Y-axis max axxeleration in normal mode in mm/s^2
|
||||
#define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define NORMAL_MAX_FEEDRATE 200 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//#define SIMPLE_ACCEL_LIMIT //new limitation method for normal/silent
|
||||
|
||||
//number of bytes from end of the file to start check
|
||||
#define END_FILE_SECTION 10000
|
||||
|
||||
|
|
@ -96,8 +101,8 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|||
// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
|
||||
// temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
|
||||
// the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
|
||||
#define MINTEMP_MINAMBIENT 18
|
||||
#define MINTEMP_MINAMBIENT_RAW 991
|
||||
#define MINTEMP_MINAMBIENT 25
|
||||
#define MINTEMP_MINAMBIENT_RAW 978
|
||||
|
||||
|
||||
//DEBUG
|
||||
|
|
@ -547,6 +552,8 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|||
|
||||
#define HEATBED_V2
|
||||
|
||||
#define M600_TIMEOUT 600 //seconds
|
||||
|
||||
//#define SUPPORT_VERBOSITY
|
||||
|
||||
#endif //__CONFIGURATION_PRUSA_H
|
||||
|
|
|
|||
|
|
@ -196,10 +196,6 @@ int MarlinSerial::read(void)
|
|||
|
||||
void MarlinSerial::flush()
|
||||
{
|
||||
// don't reverse this or there may be problems if the RX interrupt
|
||||
// occurs after reading the value of rx_buffer_head but before writing
|
||||
// the value to rx_buffer_tail; the previous value of rx_buffer_head
|
||||
// may be written to rx_buffer_tail, making it appear as if the buffer
|
||||
// don't reverse this or there may be problems if the RX interrupt
|
||||
// occurs after reading the value of rx_buffer_head but before writing
|
||||
// the value to rx_buffer_tail; the previous value of rx_buffer_head
|
||||
|
|
|
|||
|
|
@ -887,11 +887,12 @@ void factory_reset()
|
|||
}
|
||||
|
||||
void show_fw_version_warnings() {
|
||||
if (FW_DEV_VERSION == FW_VERSION_GOLD) return;
|
||||
if (FW_DEV_VERSION == FW_VERSION_GOLD || FW_DEV_VERSION == FW_VERSION_RC) return;
|
||||
switch (FW_DEV_VERSION) {
|
||||
case(FW_VERSION_ALPHA): lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_ALPHA); break;
|
||||
case(FW_VERSION_BETA): lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_BETA); break;
|
||||
case(FW_VERSION_RC): lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_RC); break;
|
||||
case(FW_VERSION_DEBUG): lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_DEBUG); break;
|
||||
default: lcd_show_fullscreen_message_and_wait_P(MSG_FW_VERSION_UNKNOWN); break;
|
||||
}
|
||||
lcd_update_enable(true);
|
||||
|
|
@ -1069,6 +1070,7 @@ void setup()
|
|||
// EEPROM_LANG to number lower than 0x0ff.
|
||||
// 1) Set a high power mode.
|
||||
eeprom_write_byte((uint8_t*)EEPROM_SILENT, 0);
|
||||
tmc2130_mode = TMC2130_MODE_NORMAL;
|
||||
eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); //run wizard
|
||||
|
||||
}
|
||||
|
|
@ -2019,6 +2021,12 @@ bool gcode_M45(bool onlyZ)
|
|||
lcd_display_message_fullscreen_P(MSG_AUTO_HOME);
|
||||
home_xy();
|
||||
|
||||
enable_endstops(false);
|
||||
current_position[X_AXIS] += 5;
|
||||
current_position[Y_AXIS] += 5;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], homing_feedrate[Z_AXIS] / 40, active_extruder);
|
||||
st_synchronize();
|
||||
|
||||
// Let the user move the Z axes up to the end stoppers.
|
||||
#ifdef TMC2130
|
||||
if (calibrate_z_auto())
|
||||
|
|
@ -2092,7 +2100,7 @@ bool gcode_M45(bool onlyZ)
|
|||
else
|
||||
{
|
||||
// Reset the baby step value and the baby step applied flag.
|
||||
calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
|
||||
calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
|
||||
eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
|
||||
// Complete XYZ calibration.
|
||||
uint8_t point_too_far_mask = 0;
|
||||
|
|
@ -4941,6 +4949,8 @@ Sigma_Exit:
|
|||
if(code_seen('Y')) max_jerk[Y_AXIS] = code_value();
|
||||
if(code_seen('Z')) max_jerk[Z_AXIS] = code_value();
|
||||
if(code_seen('E')) max_jerk[E_AXIS] = code_value();
|
||||
if (max_jerk[X_AXIS] > DEFAULT_XJERK) max_jerk[X_AXIS] = DEFAULT_XJERK;
|
||||
if (max_jerk[Y_AXIS] > DEFAULT_YJERK) max_jerk[Y_AXIS] = DEFAULT_YJERK;
|
||||
}
|
||||
break;
|
||||
case 206: // M206 additional homing offset
|
||||
|
|
@ -5459,6 +5469,8 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
feedmultiplyBckp=feedmultiply;
|
||||
int8_t TooLowZ = 0;
|
||||
|
||||
float HotendTempBckp = degTargetHotend(active_extruder);
|
||||
int fanSpeedBckp = fanSpeed;
|
||||
target[X_AXIS]=current_position[X_AXIS];
|
||||
target[Y_AXIS]=current_position[Y_AXIS];
|
||||
target[Z_AXIS]=current_position[Z_AXIS];
|
||||
|
|
@ -5529,10 +5541,13 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
|
||||
uint8_t cnt = 0;
|
||||
int counterBeep = 0;
|
||||
fanSpeed = 0;
|
||||
unsigned long waiting_start_time = millis();
|
||||
uint8_t wait_for_user_state = 0;
|
||||
lcd_display_message_fullscreen_P(MSG_PRESS_TO_UNLOAD);
|
||||
while (!lcd_clicked()) {
|
||||
while (!(wait_for_user_state == 0 && lcd_clicked())){
|
||||
|
||||
cnt++;
|
||||
//cnt++;
|
||||
manage_heater();
|
||||
manage_inactivity(true);
|
||||
|
||||
|
|
@ -5542,7 +5557,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
|
||||
#endif // SNMM*/
|
||||
|
||||
if (cnt == 0)
|
||||
//if (cnt == 0)
|
||||
{
|
||||
#if BEEPER > 0
|
||||
if (counterBeep == 500) {
|
||||
|
|
@ -5555,6 +5570,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
if (counterBeep == 20) {
|
||||
WRITE(BEEPER, LOW);
|
||||
}
|
||||
|
||||
counterBeep++;
|
||||
#else
|
||||
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
|
||||
|
|
@ -5565,17 +5581,60 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
#endif
|
||||
}
|
||||
|
||||
switch (wait_for_user_state) {
|
||||
case 0:
|
||||
delay_keep_alive(4);
|
||||
|
||||
if (millis() > waiting_start_time + (unsigned long)M600_TIMEOUT * 1000) {
|
||||
lcd_display_message_fullscreen_P(MSG_PRESS_TO_PREHEAT);
|
||||
wait_for_user_state = 1;
|
||||
setTargetHotend(0, 0);
|
||||
setTargetHotend(0, 1);
|
||||
setTargetHotend(0, 2);
|
||||
st_synchronize();
|
||||
disable_e0();
|
||||
disable_e1();
|
||||
disable_e2();
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
delay_keep_alive(4);
|
||||
|
||||
if (lcd_clicked()) {
|
||||
setTargetHotend(HotendTempBckp, active_extruder);
|
||||
lcd_wait_for_heater();
|
||||
|
||||
wait_for_user_state = 2;
|
||||
}
|
||||
break;
|
||||
case 2:
|
||||
|
||||
if (abs(degTargetHotend(active_extruder) - degHotend(active_extruder)) < 1) {
|
||||
lcd_display_message_fullscreen_P(MSG_PRESS_TO_UNLOAD);
|
||||
waiting_start_time = millis();
|
||||
wait_for_user_state = 0;
|
||||
}
|
||||
else {
|
||||
counterBeep = 20; //beeper will be inactive during waiting for nozzle preheat
|
||||
lcd.setCursor(1, 4);
|
||||
lcd.print(ftostr3(degHotend(active_extruder)));
|
||||
}
|
||||
break;
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
WRITE(BEEPER, LOW);
|
||||
|
||||
lcd_change_fil_state = 0;
|
||||
while (lcd_change_fil_state == 0) {
|
||||
|
||||
|
||||
// Unload filament
|
||||
lcd_display_message_fullscreen_P(MSG_UNLOADING_FILAMENT);
|
||||
KEEPALIVE_STATE(IN_HANDLER);
|
||||
custom_message = true;
|
||||
lcd_setstatuspgm(MSG_UNLOADING_FILAMENT);
|
||||
|
||||
// Unload filament
|
||||
if (code_seen('L'))
|
||||
{
|
||||
target[E_AXIS] += code_value();
|
||||
|
|
@ -5616,10 +5675,10 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 5200 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
target[E_AXIS] -= 15;
|
||||
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 160 / 60, active_extruder);
|
||||
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 1000 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
target[E_AXIS] -= 20;
|
||||
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 5000 / 60, active_extruder);
|
||||
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 1000 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
|
||||
#endif // SNMM
|
||||
|
|
@ -5627,16 +5686,31 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
|
||||
//finish moves
|
||||
st_synchronize();
|
||||
|
||||
lcd_display_message_fullscreen_P(MSG_PULL_OUT_FILAMENT);
|
||||
|
||||
//disable extruder steppers so filament can be removed
|
||||
disable_e0();
|
||||
disable_e1();
|
||||
disable_e2();
|
||||
delay(100);
|
||||
|
||||
|
||||
WRITE(BEEPER, HIGH);
|
||||
counterBeep = 0;
|
||||
while(!lcd_clicked() && (counterBeep < 50)) {
|
||||
if(counterBeep > 5) WRITE(BEEPER, LOW);
|
||||
delay_keep_alive(100);
|
||||
counterBeep++;
|
||||
}
|
||||
WRITE(BEEPER, LOW);
|
||||
|
||||
KEEPALIVE_STATE(PAUSED_FOR_USER);
|
||||
lcd_change_fil_state = !lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_UNLOAD_SUCCESSFULL, false, false);
|
||||
lcd_change_fil_state = lcd_show_fullscreen_message_yes_no_and_wait_P(MSG_UNLOAD_SUCCESSFULL, false, true);
|
||||
if (lcd_change_fil_state == 0) lcd_show_fullscreen_message_and_wait_P(MSG_CHECK_IDLER);
|
||||
//lcd_return_to_status();
|
||||
lcd_update_enable(true);
|
||||
}
|
||||
|
||||
//Wait for user to insert filament
|
||||
lcd_wait_interact();
|
||||
//load_filament_time = millis();
|
||||
|
|
@ -5770,6 +5844,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
|
||||
|
||||
//Not let's go back to print
|
||||
fanSpeed = fanSpeedBckp;
|
||||
|
||||
//Feed a little of filament to stabilize pressure
|
||||
target[E_AXIS]+= FILAMENTCHANGE_RECFEED;
|
||||
|
|
@ -6018,11 +6093,34 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
|
|||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5200 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
current_position[E_AXIS] -= 15;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 160 / 60, active_extruder);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1000 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
current_position[E_AXIS] -= 20;
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5000 / 60, active_extruder);
|
||||
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 1000 / 60, active_extruder);
|
||||
st_synchronize();
|
||||
|
||||
lcd_display_message_fullscreen_P(MSG_PULL_OUT_FILAMENT);
|
||||
|
||||
//disable extruder steppers so filament can be removed
|
||||
disable_e0();
|
||||
disable_e1();
|
||||
disable_e2();
|
||||
delay(100);
|
||||
|
||||
|
||||
WRITE(BEEPER, HIGH);
|
||||
uint8_t counterBeep = 0;
|
||||
while (!lcd_clicked() && (counterBeep < 50)) {
|
||||
if (counterBeep > 5) WRITE(BEEPER, LOW);
|
||||
delay_keep_alive(100);
|
||||
counterBeep++;
|
||||
}
|
||||
WRITE(BEEPER, LOW);
|
||||
st_synchronize();
|
||||
while (lcd_clicked()) delay_keep_alive(100);
|
||||
|
||||
lcd_update_enable(true);
|
||||
|
||||
lcd_setstatuspgm(WELCOME_MSG);
|
||||
custom_message = false;
|
||||
custom_message_type = 0;
|
||||
|
|
|
|||
|
|
@ -368,11 +368,15 @@ void get_command()
|
|||
|
||||
bool rx_buffer_full = false; //flag that serial rx buffer is full
|
||||
|
||||
while (MYSERIAL.available() > 0) {
|
||||
if (MYSERIAL.available() == RX_BUFFER_SIZE - 1) { //compare number of chars buffered in rx buffer with rx buffer size
|
||||
MYSERIAL.flush();
|
||||
SERIAL_ECHOLNPGM("Full RX Buffer"); //if buffer was full, there is danger that reading of last gcode will not be completed
|
||||
|
||||
rx_buffer_full = true; //sets flag that buffer was full
|
||||
}
|
||||
|
||||
while (MYSERIAL.available() > 0) {
|
||||
|
||||
char serial_char = MYSERIAL.read();
|
||||
/* if (selectedSerialPort == 1)
|
||||
{
|
||||
|
|
@ -529,11 +533,11 @@ void get_command()
|
|||
}
|
||||
|
||||
//add comment
|
||||
if (rx_buffer_full == true && serial_count > 0) { //if rx buffer was full and string was not properly terminated
|
||||
/*if (rx_buffer_full == true && serial_count > 0) { //if rx buffer was full and string was not properly terminated
|
||||
rx_buffer_full = false;
|
||||
bufindw = bufindw - serial_count; //adjust tail of the buffer to prepare buffer for writing new command
|
||||
serial_count = 0;
|
||||
}
|
||||
}*/
|
||||
|
||||
#ifdef SDSUPPORT
|
||||
if(!card.sdprinting || serial_count!=0){
|
||||
|
|
|
|||
|
|
@ -153,11 +153,13 @@ bool fsensor_check_autoload(void)
|
|||
|
||||
ISR(PCINT2_vect)
|
||||
{
|
||||
// return;
|
||||
if (!((fsensor_int_pin_old ^ PINK) & FSENSOR_INT_PIN_MSK)) return;
|
||||
// puts("PCINT2\n");
|
||||
if (!((fsensor_int_pin_old ^ PINK) & FSENSOR_INT_PIN_MSK)) return;
|
||||
fsensor_int_pin_old = PINK;
|
||||
static bool _lock = false;
|
||||
if (_lock) return;
|
||||
_lock = true;
|
||||
// return;
|
||||
|
||||
int st_cnt = fsensor_st_cnt;
|
||||
fsensor_st_cnt = 0;
|
||||
sei();
|
||||
|
|
@ -218,6 +220,7 @@ ISR(PCINT2_vect)
|
|||
}
|
||||
}
|
||||
pat9125_y = 0;
|
||||
_lock = false;
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -341,6 +341,13 @@ const char * const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_CHANGING_FILAMENT_CZ
|
||||
};
|
||||
|
||||
const char MSG_CHECK_IDLER_EN[] PROGMEM = "Please open idler and remove filament manually.";
|
||||
const char MSG_CHECK_IDLER_CZ[] PROGMEM = "Prosim otevrete idler a manualne odstrante filament.";
|
||||
const char * const MSG_CHECK_IDLER_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_CHECK_IDLER_EN,
|
||||
MSG_CHECK_IDLER_CZ
|
||||
};
|
||||
|
||||
const char MSG_CHOOSE_EXTRUDER_EN[] PROGMEM = "Choose extruder:";
|
||||
const char MSG_CHOOSE_EXTRUDER_CZ[] PROGMEM = "Vyberte extruder:";
|
||||
const char * const MSG_CHOOSE_EXTRUDER_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
|
|
@ -838,6 +845,13 @@ const char * const MSG_FW_VERSION_BETA_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_FW_VERSION_BETA_CZ
|
||||
};
|
||||
|
||||
const char MSG_FW_VERSION_DEBUG_EN[] PROGMEM = "This is development firmware version which contains additional debugging features. Using this version may cause printer damage.";
|
||||
const char MSG_FW_VERSION_DEBUG_CZ[] PROGMEM = "Toto je vyvojova verze firmwaru obsahujici funkce pro debugging. Pouziti teto verze muze poskodit Vasi tiskarnu.";
|
||||
const char * const MSG_FW_VERSION_DEBUG_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_FW_VERSION_DEBUG_EN,
|
||||
MSG_FW_VERSION_DEBUG_CZ
|
||||
};
|
||||
|
||||
const char MSG_FW_VERSION_RC_EN[] PROGMEM = "This firmware version is release candidate. Some of the features may not work properly.";
|
||||
const char MSG_FW_VERSION_RC_CZ[] PROGMEM = "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive.";
|
||||
const char * const MSG_FW_VERSION_RC_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
|
|
@ -1444,6 +1458,13 @@ const char * const MSG_PRESS_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_PRESS_CZ
|
||||
};
|
||||
|
||||
const char MSG_PRESS_TO_PREHEAT_EN[] PROGMEM = "Press knob to preheat nozzle and continue.";
|
||||
const char MSG_PRESS_TO_PREHEAT_CZ[] PROGMEM = "Pro nahrati trysky a pokracovani stisknete tlacitko.";
|
||||
const char * const MSG_PRESS_TO_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PRESS_TO_PREHEAT_EN,
|
||||
MSG_PRESS_TO_PREHEAT_CZ
|
||||
};
|
||||
|
||||
const char MSG_PRESS_TO_UNLOAD_EN[] PROGMEM = "Please press the knob to unload filament";
|
||||
const char MSG_PRESS_TO_UNLOAD_CZ[] PROGMEM = "Pro vysunuti filamentu stisknete prosim tlacitko";
|
||||
const char * const MSG_PRESS_TO_UNLOAD_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
|
|
@ -1491,6 +1512,13 @@ const char * const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_PRUSA3D_HOWTO_CZ
|
||||
};
|
||||
|
||||
const char MSG_PULL_OUT_FILAMENT_EN[] PROGMEM = "Please pull out filament immediately";
|
||||
const char MSG_PULL_OUT_FILAMENT_CZ[] PROGMEM = "Prosim vyjmete urychlene filament";
|
||||
const char * const MSG_PULL_OUT_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_PULL_OUT_FILAMENT_EN,
|
||||
MSG_PULL_OUT_FILAMENT_CZ
|
||||
};
|
||||
|
||||
const char MSG_REBOOT_EN[] PROGMEM = "Reboot the printer";
|
||||
const char MSG_REBOOT_CZ[] PROGMEM = "Restartujte tiskarnu";
|
||||
const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
|
|
@ -2207,8 +2235,8 @@ const char * const MSG_UNLOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
|
|||
MSG_UNLOAD_FILAMENT_4_CZ
|
||||
};
|
||||
|
||||
const char MSG_UNLOAD_SUCCESSFULL_EN[] PROGMEM = "Repeat unloading filament?";
|
||||
const char MSG_UNLOAD_SUCCESSFULL_CZ[] PROGMEM = "Opakovat vysunuti filamentu?";
|
||||
const char MSG_UNLOAD_SUCCESSFULL_EN[] PROGMEM = "Was filament unload successfull?";
|
||||
const char MSG_UNLOAD_SUCCESSFULL_CZ[] PROGMEM = "Bylo vysunuti filamentu uspesne?";
|
||||
const char * const MSG_UNLOAD_SUCCESSFULL_LANG_TABLE[LANG_NUM] PROGMEM = {
|
||||
MSG_UNLOAD_SUCCESSFULL_EN,
|
||||
MSG_UNLOAD_SUCCESSFULL_CZ
|
||||
|
|
|
|||
|
|
@ -126,6 +126,8 @@ extern const char* const MSG_CHANGE_SUCCESS_LANG_TABLE[LANG_NUM];
|
|||
#define MSG_CHANGE_SUCCESS LANG_TABLE_SELECT(MSG_CHANGE_SUCCESS_LANG_TABLE)
|
||||
extern const char* const MSG_CHANGING_FILAMENT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_CHANGING_FILAMENT LANG_TABLE_SELECT(MSG_CHANGING_FILAMENT_LANG_TABLE)
|
||||
extern const char* const MSG_CHECK_IDLER_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_CHECK_IDLER LANG_TABLE_SELECT(MSG_CHECK_IDLER_LANG_TABLE)
|
||||
extern const char* const MSG_CHOOSE_EXTRUDER_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_CHOOSE_EXTRUDER LANG_TABLE_SELECT(MSG_CHOOSE_EXTRUDER_LANG_TABLE)
|
||||
extern const char* const MSG_CLEAN_NOZZLE_E_LANG_TABLE[LANG_NUM];
|
||||
|
|
@ -288,6 +290,8 @@ extern const char* const MSG_FW_VERSION_ALPHA_LANG_TABLE[LANG_NUM];
|
|||
#define MSG_FW_VERSION_ALPHA LANG_TABLE_SELECT(MSG_FW_VERSION_ALPHA_LANG_TABLE)
|
||||
extern const char* const MSG_FW_VERSION_BETA_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FW_VERSION_BETA LANG_TABLE_SELECT(MSG_FW_VERSION_BETA_LANG_TABLE)
|
||||
extern const char* const MSG_FW_VERSION_DEBUG_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FW_VERSION_DEBUG LANG_TABLE_SELECT(MSG_FW_VERSION_DEBUG_LANG_TABLE)
|
||||
extern const char* const MSG_FW_VERSION_RC_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_FW_VERSION_RC LANG_TABLE_SELECT(MSG_FW_VERSION_RC_LANG_TABLE)
|
||||
extern const char* const MSG_FW_VERSION_UNKNOWN_LANG_TABLE[LANG_NUM];
|
||||
|
|
@ -482,6 +486,8 @@ extern const char* const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM];
|
|||
#define MSG_PREPARE_FILAMENT LANG_TABLE_SELECT(MSG_PREPARE_FILAMENT_LANG_TABLE)
|
||||
extern const char* const MSG_PRESS_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_PRESS LANG_TABLE_SELECT(MSG_PRESS_LANG_TABLE)
|
||||
extern const char* const MSG_PRESS_TO_PREHEAT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_PRESS_TO_PREHEAT LANG_TABLE_SELECT(MSG_PRESS_TO_PREHEAT_LANG_TABLE)
|
||||
extern const char* const MSG_PRESS_TO_UNLOAD_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_PRESS_TO_UNLOAD LANG_TABLE_SELECT(MSG_PRESS_TO_UNLOAD_LANG_TABLE)
|
||||
extern const char* const MSG_PRINTER_DISCONNECTED_LANG_TABLE[1];
|
||||
|
|
@ -496,6 +502,8 @@ extern const char* const MSG_PRUSA3D_FORUM_LANG_TABLE[LANG_NUM];
|
|||
#define MSG_PRUSA3D_FORUM LANG_TABLE_SELECT(MSG_PRUSA3D_FORUM_LANG_TABLE)
|
||||
extern const char* const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_PRUSA3D_HOWTO LANG_TABLE_SELECT(MSG_PRUSA3D_HOWTO_LANG_TABLE)
|
||||
extern const char* const MSG_PULL_OUT_FILAMENT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_PULL_OUT_FILAMENT LANG_TABLE_SELECT(MSG_PULL_OUT_FILAMENT_LANG_TABLE)
|
||||
extern const char* const MSG_REBOOT_LANG_TABLE[LANG_NUM];
|
||||
#define MSG_REBOOT LANG_TABLE_SELECT(MSG_REBOOT_LANG_TABLE)
|
||||
extern const char* const MSG_RECOVERING_PRINT_LANG_TABLE[LANG_NUM];
|
||||
|
|
|
|||
|
|
@ -74,7 +74,7 @@
|
|||
#define MSG_PREHEAT "Predehrev"
|
||||
#define MSG_UNLOAD_FILAMENT "Vyjmout filament"
|
||||
#define MSG_LOAD_FILAMENT "Zavest filament"
|
||||
#define(length=17) MSG_AUTOLOAD_FILAMENT "AutoZavedeni fil."
|
||||
#define MSG_AUTOLOAD_FILAMENT "AutoZavedeni fil."
|
||||
#define MSG_LOAD_FILAMENT_1 "Zavest filament 1"
|
||||
#define MSG_LOAD_FILAMENT_2 "Zavest filament 2"
|
||||
#define MSG_LOAD_FILAMENT_3 "Zavest filament 3"
|
||||
|
|
@ -265,7 +265,7 @@
|
|||
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
|
||||
#define MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
|
||||
|
||||
#define(length=20, lines=4) MSG_STACK_ERROR "Chyba - Doslo k prepisu staticke pameti!"
|
||||
#define MSG_STACK_ERROR "Chyba - Doslo k prepisu staticke pameti!"
|
||||
|
||||
#define MSG_LOOSE_PULLEY "Uvolnena remenicka"
|
||||
#define MSG_FILAMENT_LOADING_T0 "Vlozte filament do extruderu 1. Potvrdte tlacitkem."
|
||||
|
|
@ -345,7 +345,7 @@
|
|||
#define MSG_MEASURED_SKEW "Merene zkoseni:"
|
||||
#define MSG_SLIGHT_SKEW "Lehke zkoseni:"
|
||||
#define MSG_SEVERE_SKEW "Tezke zkoseni:"
|
||||
ve
|
||||
|
||||
#define MSG_CALIBRATE_Z_AUTO "Kalibruji Z"
|
||||
#define MSG_FSENSOR_OFF "Fil. senzor [vyp]"
|
||||
#define MSG_FSENSOR_NA "Fil. senzor [N/A]"
|
||||
|
|
@ -355,12 +355,12 @@ ve
|
|||
#define MSG_CRASHDETECT_OFF "Crash det. [vyp]"
|
||||
#define MSG_FANS_CHECK_ON "Kontr. vent.[zap]"
|
||||
#define MSG_FANS_CHECK_OFF "Kontr. vent.[vyp]"
|
||||
#define(length=17, lines=1) MSG_FSENS_AUTOLOAD_ON "F. autozav. [zap]"
|
||||
#define(length=17, lines=1) MSG_FSENS_AUTOLOAD_OFF "F. autozav. [vyp]"
|
||||
#define(length=17, lines=1) MSG_FSENS_AUTOLOAD_NA "F. autozav. [N/A]"
|
||||
#define MSG_FSENS_AUTOLOAD_ON "F. autozav. [zap]"
|
||||
#define MSG_FSENS_AUTOLOAD_OFF "F. autozav. [vyp]"
|
||||
#define MSG_FSENS_AUTOLOAD_NA "F. autozav. [N/A]"
|
||||
#define MSG_RECOVERING_PRINT "Obnovovani tisku "
|
||||
#define(length=20, lines=1) MSG_CRASH_DETECTED "Detekovan naraz."
|
||||
#define(length=20, lines=2) MSG_CRASH_DETECTED2 "Naraz detekovan, pokracovat v tisku?"
|
||||
#define MSG_CRASH_DETECTED "Detekovan naraz."
|
||||
#define MSG_CRASH_DETECTED2 "Naraz detekovan, pokracovat v tisku?"
|
||||
|
||||
#define MSG_SELFTEST_AXIS "Osa"
|
||||
#define MSG_SELFTEST_AXIS_LENGTH "Delka osy"
|
||||
|
|
@ -369,37 +369,40 @@ ve
|
|||
#define MSG_PLACE_STEEL_SHEET "Umistete prosim tiskovy plat na heatbed"
|
||||
#define MSG_RECOVER_PRINT "Detekovan vypadek proudu.Obnovit tisk?"
|
||||
#define MSG_PRESS_TO_UNLOAD "Pro vysunuti filamentu stisknete prosim tlacitko"
|
||||
#define MSG_UNLOAD_SUCCESSFULL "Opakovat vysunuti filamentu?"
|
||||
#define MSG_UNLOAD_SUCCESSFULL "Bylo vysunuti filamentu uspesne?"
|
||||
#define MSG_PRESS_TO_PREHEAT "Pro nahrati trysky a pokracovani stisknete tlacitko."
|
||||
#define MSG_PULL_OUT_FILAMENT "Prosim vyjmete urychlene filament"
|
||||
#define MSG_CHECK_IDLER "Prosim otevrete idler a manualne odstrante filament."
|
||||
#define MSG_FILE_INCOMPLETE "Soubor nekompletni. Pokracovat?"
|
||||
#define MSG_FILE_CNT "Nektere soubory nebudou setrideny. Maximalni pocet souboru pro setrideni je 100."
|
||||
#define MSG_SORT_TIME "Trideni [Cas]"
|
||||
#define MSG_SORT_ALPHA "Trideni [Abeceda]"
|
||||
#define MSG_SORT_NONE "Trideni [Zadne]"
|
||||
#define(length=20, lines=1) MSG_SORTING "Trideni souboru"
|
||||
#define MSG_SORTING "Trideni souboru"
|
||||
|
||||
|
||||
#define(length=12, lines=1) MSG_INFO_NOZZLE_FAN "Trysk. vent:"
|
||||
#define(length=12, lines=1) MSG_INFO_PRINT_FAN "Tisk. vent:"
|
||||
#define MSG_INFO_NOZZLE_FAN "Trysk. vent:"
|
||||
#define MSG_INFO_PRINT_FAN "Tisk. vent:"
|
||||
|
||||
|
||||
#define(length=17, lines=1) MSG_SECOND_SERIAL_ON "RPi port [zap]"
|
||||
#define(length=17, lines=1) MSG_SECOND_SERIAL_OFF "RPi port [vyp]"
|
||||
#define MSG_SECOND_SERIAL_ON "RPi port [zap]"
|
||||
#define MSG_SECOND_SERIAL_OFF "RPi port [vyp]"
|
||||
|
||||
#define(length=15, lines=1) MSG_INFO_EXTRUDER "Extruder info"
|
||||
#define(length=15, lines=1) MSG_MENU_VOLTAGES "Napeti"
|
||||
#define(length=15, lines=1) MSG_MENU_TEMPERATURES "Teploty"
|
||||
#define(length=15, lines=1) MSG_MENU_BELT_STATUS "Stav remenu"
|
||||
#define MSG_INFO_EXTRUDER "Extruder info"
|
||||
#define MSG_MENU_VOLTAGES "Napeti"
|
||||
#define MSG_MENU_TEMPERATURES "Teploty"
|
||||
#define MSG_MENU_BELT_STATUS "Stav remenu"
|
||||
|
||||
#define(length=20, lines=4) MSG_CRASH_DET_ONLY_IN_NORMAL "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu"
|
||||
#define(length=20, lines=4) MSG_CRASH_DET_STEALTH_FORCE_OFF "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu"
|
||||
#define MSG_CRASH_DET_ONLY_IN_NORMAL "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu"
|
||||
#define MSG_CRASH_DET_STEALTH_FORCE_OFF "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu"
|
||||
|
||||
#define(length=20, lines=4) MSG_AUTOLOADING_ENABLED "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
|
||||
#define(length=20, lines=4) MSG_AUTOLOADING_ONLY_IF_FSENS_ON "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru..."
|
||||
#define MSG_AUTOLOADING_ENABLED "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
|
||||
#define MSG_AUTOLOADING_ONLY_IF_FSENS_ON "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru..."
|
||||
|
||||
#define(length=20, lines=4) MSG_FSENS_NOT_RESPONDING "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
|
||||
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_UNKNOWN "VAROVANI: Neznama verze firmware"
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_ALPHA "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_BETA "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_RC "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive."
|
||||
#define MSG_FSENS_NOT_RESPONDING "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
|
||||
|
||||
#define MSG_FW_VERSION_UNKNOWN "VAROVANI: Neznama verze firmware"
|
||||
#define MSG_FW_VERSION_ALPHA "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
|
||||
#define MSG_FW_VERSION_BETA "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
|
||||
#define MSG_FW_VERSION_RC "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive."
|
||||
#define MSG_FW_VERSION_DEBUG "Toto je vyvojova verze firmwaru obsahujici funkce pro debugging. Pouziti teto verze muze poskodit Vasi tiskarnu."
|
||||
|
|
|
|||
|
|
@ -385,7 +385,10 @@
|
|||
#define(length=17, lines=1) MSG_FSENS_AUTOLOAD_OFF "F. autoload [off]"
|
||||
#define(length=17, lines=1) MSG_FSENS_AUTOLOAD_NA "F. autoload [N/A]"
|
||||
#define(length=20, lines=4) MSG_PRESS_TO_UNLOAD "Please press the knob to unload filament"
|
||||
#define(length=20, lines=2) MSG_UNLOAD_SUCCESSFULL "Repeat unloading filament?"
|
||||
#define(length=20, lines=4) MSG_PRESS_TO_PREHEAT "Press knob to preheat nozzle and continue."
|
||||
#define(length=20, lines=2) MSG_UNLOAD_SUCCESSFULL "Was filament unload successfull?"
|
||||
#define(length=20, lines=4) MSG_CHECK_IDLER "Please open idler and remove filament manually."
|
||||
#define(length=20, lines=4) MSG_PULL_OUT_FILAMENT "Please pull out filament immediately"
|
||||
#define(length=20, lines=2) MSG_FILE_INCOMPLETE "File incomplete. Continue anyway?"
|
||||
|
||||
#define(length=20, lines=4) MSG_DEFAULT_SETTINGS_LOADED "Default settings loaded"
|
||||
|
|
@ -408,3 +411,4 @@
|
|||
#define(length=20, lines=8) MSG_FW_VERSION_ALPHA "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage."
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_BETA "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_RC "This firmware version is release candidate. Some of the features may not work properly."
|
||||
#define(length=20, lines=8) MSG_FW_VERSION_DEBUG "This is development firmware version which contains additional debugging features. Using this version may cause printer damage."
|
||||
|
|
@ -999,8 +999,19 @@ Having the real displacement of the head, we can calculate the total movement le
|
|||
current_speed[i] = delta_mm[i] * inverse_second;
|
||||
#ifdef TMC2130
|
||||
float max_fr = max_feedrate[i];
|
||||
if ((tmc2130_mode == TMC2130_MODE_SILENT) && (i < 2))
|
||||
if (i < 2) // X, Y
|
||||
{
|
||||
if (tmc2130_mode == TMC2130_MODE_SILENT)
|
||||
{
|
||||
if (max_fr > SILENT_MAX_FEEDRATE)
|
||||
max_fr = SILENT_MAX_FEEDRATE;
|
||||
}
|
||||
else
|
||||
{
|
||||
if (max_fr > NORMAL_MAX_FEEDRATE)
|
||||
max_fr = NORMAL_MAX_FEEDRATE;
|
||||
}
|
||||
}
|
||||
if(fabs(current_speed[i]) > max_fr)
|
||||
speed_factor = min(speed_factor, max_fr / fabs(current_speed[i]));
|
||||
#else //TMC2130
|
||||
|
|
@ -1032,21 +1043,41 @@ Having the real displacement of the head, we can calculate the total movement le
|
|||
{
|
||||
block->acceleration_st = ceil(acceleration * steps_per_mm); // convert to: acceleration steps/sec^2
|
||||
#ifdef TMC2130
|
||||
#ifdef SIMPLE_ACCEL_LIMIT // in some cases can be acceleration limited inproperly
|
||||
if (tmc2130_mode == TMC2130_MODE_SILENT)
|
||||
{
|
||||
if(((float)block->acceleration_st * (float)block->steps_x.wide / (float)block->step_event_count.wide) > SILENT_MAX_ACCEL_X_ST)
|
||||
block->acceleration_st = SILENT_MAX_ACCEL_X_ST;
|
||||
if(((float)block->acceleration_st * (float)block->steps_y.wide / (float)block->step_event_count.wide) > SILENT_MAX_ACCEL_Y_ST)
|
||||
block->acceleration_st = SILENT_MAX_ACCEL_Y_ST;
|
||||
if (block->steps_x.wide || block->steps_y.wide)
|
||||
if (block->acceleration_st > SILENT_MAX_ACCEL_ST) block->acceleration_st = SILENT_MAX_ACCEL_ST;
|
||||
}
|
||||
else
|
||||
{
|
||||
if (block->steps_x.wide || block->steps_y.wide)
|
||||
if (block->acceleration_st > NORMAL_MAX_ACCEL_ST) block->acceleration_st = NORMAL_MAX_ACCEL_ST;
|
||||
}
|
||||
if (block->steps_x.wide && (block->acceleration_st > axis_steps_per_sqr_second[X_AXIS])) block->acceleration_st = axis_steps_per_sqr_second[X_AXIS];
|
||||
if (block->steps_y.wide && (block->acceleration_st > axis_steps_per_sqr_second[Y_AXIS])) block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS];
|
||||
if (block->steps_z.wide && (block->acceleration_st > axis_steps_per_sqr_second[Z_AXIS])) block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS];
|
||||
if (block->steps_e.wide && (block->acceleration_st > axis_steps_per_sqr_second[E_AXIS])) block->acceleration_st = axis_steps_per_sqr_second[E_AXIS];
|
||||
#else // SIMPLE_ACCEL_LIMIT
|
||||
if (tmc2130_mode == TMC2130_MODE_SILENT)
|
||||
{
|
||||
if ((block->steps_x.wide > block->step_event_count.wide / 2) || (block->steps_y.wide > block->step_event_count.wide / 2))
|
||||
if (block->acceleration_st > SILENT_MAX_ACCEL_ST) block->acceleration_st = SILENT_MAX_ACCEL_ST;
|
||||
}
|
||||
else
|
||||
{
|
||||
if ((block->steps_x.wide > block->step_event_count.wide / 2) || (block->steps_y.wide > block->step_event_count.wide / 2))
|
||||
if (block->acceleration_st > NORMAL_MAX_ACCEL_ST) block->acceleration_st = NORMAL_MAX_ACCEL_ST;
|
||||
}
|
||||
if(((float)block->acceleration_st * (float)block->steps_x.wide / (float)block->step_event_count.wide) > axis_steps_per_sqr_second[X_AXIS])
|
||||
block->acceleration_st = axis_steps_per_sqr_second[X_AXIS];
|
||||
if(((float)block->acceleration_st * (float)block->steps_y.wide / (float)block->step_event_count.wide) > axis_steps_per_sqr_second[Y_AXIS])
|
||||
block->acceleration_st = axis_steps_per_sqr_second[Y_AXIS];
|
||||
if(((float)block->acceleration_st * (float)block->steps_z.wide / (float)block->step_event_count.wide) > axis_steps_per_sqr_second[Z_AXIS])
|
||||
block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS];
|
||||
if(((float)block->acceleration_st * (float)block->steps_e.wide / (float)block->step_event_count.wide) > axis_steps_per_sqr_second[E_AXIS])
|
||||
block->acceleration_st = axis_steps_per_sqr_second[E_AXIS];
|
||||
if(((float)block->acceleration_st * (float)block->steps_z.wide / (float)block->step_event_count.wide ) > axis_steps_per_sqr_second[Z_AXIS])
|
||||
block->acceleration_st = axis_steps_per_sqr_second[Z_AXIS];
|
||||
#endif // SIMPLE_ACCEL_LIMIT
|
||||
#else //TMC2130
|
||||
// Limit acceleration per axis
|
||||
//FIXME Vojtech: One shall rather limit a projection of the acceleration vector instead of using the limit.
|
||||
|
|
|
|||
|
|
@ -1879,14 +1879,18 @@ ISR(TIMER0_COMPB_vect)
|
|||
|
||||
if(curTodo>0)
|
||||
{
|
||||
asm("cli");
|
||||
babystep(axis,/*fwd*/true);
|
||||
babystepsTodo[axis]--; //less to do next time
|
||||
asm("sei");
|
||||
}
|
||||
else
|
||||
if(curTodo<0)
|
||||
{
|
||||
asm("cli");
|
||||
babystep(axis,/*fwd*/false);
|
||||
babystepsTodo[axis]++; //less to do next time
|
||||
asm("sei");
|
||||
}
|
||||
}
|
||||
#endif //BABYSTEPPING
|
||||
|
|
|
|||
|
|
@ -239,7 +239,9 @@ void tmc2130_st_isr(uint8_t last_step_mask)
|
|||
{
|
||||
tmc2130_sg_cnt[axis] = tmc2130_sg_err[axis];
|
||||
tmc2130_sg_change = true;
|
||||
if (tmc2130_sg_err[axis] >= 32)
|
||||
uint8_t sg_thr = 48;
|
||||
if (axis == Y_AXIS) sg_thr = 64;
|
||||
if (tmc2130_sg_err[axis] >= sg_thr)
|
||||
{
|
||||
tmc2130_sg_err[axis] = 0;
|
||||
crash = true;
|
||||
|
|
|
|||
|
|
@ -335,22 +335,28 @@ uint8_t lcdDrawUpdate = 2; /* Set to none-zero when the LCD nee
|
|||
// float raw_Ki, raw_Kd;
|
||||
#endif
|
||||
|
||||
static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder = 0, const bool feedback = true, bool reset_menu_state = true) {
|
||||
if (currentMenu != menu) {
|
||||
static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder = 0, const bool feedback = true, bool reset_menu_state = true)
|
||||
{
|
||||
asm("cli");
|
||||
if (currentMenu != menu)
|
||||
{
|
||||
currentMenu = menu;
|
||||
encoderPosition = encoder;
|
||||
if (reset_menu_state) {
|
||||
asm("sei");
|
||||
if (reset_menu_state)
|
||||
{
|
||||
// Resets the global shared C union.
|
||||
// This ensures, that the menu entered will find out, that it shall initialize itself.
|
||||
memset(&menuData, 0, sizeof(menuData));
|
||||
}
|
||||
if (feedback) lcd_quick_feedback();
|
||||
|
||||
// For LCD_PROGRESS_BAR re-initialize the custom characters
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
lcd_set_custom_characters(menu == lcd_status_screen);
|
||||
#endif
|
||||
}
|
||||
else
|
||||
asm("sei");
|
||||
}
|
||||
|
||||
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
|
||||
|
|
@ -2458,6 +2464,17 @@ void lcd_adjust_z() {
|
|||
|
||||
}
|
||||
|
||||
void lcd_wait_for_heater() {
|
||||
lcd_display_message_fullscreen_P(MSG_WIZARD_HEATING);
|
||||
|
||||
lcd.setCursor(0, 4);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
lcd.print(ftostr3(degHotend(active_extruder)));
|
||||
lcd.print("/");
|
||||
lcd.print(ftostr3(degTargetHotend(active_extruder)));
|
||||
lcd.print(LCD_STR_DEGREE);
|
||||
}
|
||||
|
||||
void lcd_wait_for_cool_down() {
|
||||
lcd_set_custom_characters_degree();
|
||||
setTargetHotend(0,0);
|
||||
|
|
@ -5495,8 +5512,10 @@ void lcd_sdcard_menu()
|
|||
} \
|
||||
static void menu_action_setting_edit_ ## _name (const char* pstr, _type* ptr, _type minValue, _type maxValue) \
|
||||
{ \
|
||||
asm("cli"); \
|
||||
menuData.editMenuParentState.prevMenu = currentMenu; \
|
||||
menuData.editMenuParentState.prevEncoderPosition = encoderPosition; \
|
||||
asm("sei"); \
|
||||
\
|
||||
lcdDrawUpdate = 2; \
|
||||
menuData.editMenuParentState.editLabel = pstr; \
|
||||
|
|
@ -6910,6 +6929,9 @@ void lcd_setcontrast(uint8_t value)
|
|||
/* Warning: This function is called from interrupt context */
|
||||
void lcd_buttons_update()
|
||||
{
|
||||
static bool _lock = false;
|
||||
if (_lock) return;
|
||||
_lock = true;
|
||||
#ifdef NEWPANEL
|
||||
uint8_t newbutton = 0;
|
||||
if (READ(BTN_EN1) == 0) newbutton |= EN_A;
|
||||
|
|
@ -7034,6 +7056,7 @@ void lcd_buttons_update()
|
|||
}
|
||||
}
|
||||
lastEncoderBits = enc;
|
||||
_lock = false;
|
||||
}
|
||||
|
||||
bool lcd_detected(void)
|
||||
|
|
|
|||
|
|
@ -258,6 +258,7 @@ void lcd_farm_sdcard_menu();
|
|||
void lcd_farm_sdcard_menu_w();
|
||||
//void get_description();
|
||||
|
||||
void lcd_wait_for_heater();
|
||||
void lcd_wait_for_cool_down();
|
||||
void adjust_bed_reset();
|
||||
void lcd_extr_cal_reset();
|
||||
|
|
|
|||
Loading…
Reference in a new issue