Merge pull request #3770 from 3d-gussner/MK3_3_12_Temp_model_cal_wizard

PFW-1434: MK3_3.12 Temp model calibration during wizard
2022-11-30 15:34:01 +01:00 · 2022-11-30 15:34:01 +01:00 · 6062a507d9
commit 6062a507d9
parent a03183723c 7ca4d73d4a
24 changed files with 255 additions and 13 deletions
--- a/Firmware/Configuration.h
+++ b/Firmware/Configuration.h
@ -545,7 +545,12 @@ enum CalibrationStatus
 	// For the wizard: factory assembled, needs to run Z calibration.
 	CALIBRATION_STATUS_Z_CALIBRATION = 240,

-	// The XYZ calibration has been performed, now it remains to run the V2Calibration.gcode.
+#ifdef TEMP_MODEL
+	// The XYZ calibration has been performed, needs to run Temp model calibration.
+	CALIBRATION_STATUS_TEMP_MODEL_CALIBRATION = 235,
+#endif //TEMP_MODEL
+
+// The XYZ calibration AND OR Temp model calibration has been performed, now it remains to run the V2Calibration.gcode.
 	CALIBRATION_STATUS_LIVE_ADJUST = 230,

    // Calibrated, ready to print.
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@ -1547,6 +1547,12 @@ void setup()
 		  // Show the message.
 		  lcd_show_fullscreen_message_and_wait_P(_T(MSG_FOLLOW_CALIBRATION_FLOW));
 	  }
+#ifdef TEMP_MODEL
+	  else if (calibration_status() == CALIBRATION_STATUS_TEMP_MODEL_CALIBRATION) {
+		  lcd_show_fullscreen_message_and_wait_P(_T(MSG_TM_NOT_CAL));
+		  lcd_update_enable(true);
+	  }
+#endif //TEMP_MODEL
 	  else if (calibration_status() == CALIBRATION_STATUS_LIVE_ADJUST) {
 		  // Show the message.
 		  lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
@ -3406,9 +3412,14 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 				lcd_bed_calibration_show_result(result, point_too_far_mask);
 				if (result >= 0)
 				{
+#ifdef TEMP_MODEL
+					calibration_status_store(CALIBRATION_STATUS_TEMP_MODEL_CALIBRATION);
+					if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) != 1) lcd_show_fullscreen_message_and_wait_P(_T(MSG_TM_NOT_CAL));
+#else
 					// Calibration valid, the machine should be able to print. Advise the user to run the V2Calibration.gcode.
 					calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
 					if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) != 1) lcd_show_fullscreen_message_and_wait_P(_T(MSG_BABYSTEP_Z_NOT_SET));
+#endif //TEMP_MODEL
 					final_result = true;
 				}
 			}
--- a/Firmware/messages.cpp
+++ b/Firmware/messages.cpp
@ -164,6 +164,7 @@ const char MSG_IR_UNKNOWN[] PROGMEM_I1 = ISTR("unknown state");////MSG_IR_UNKNOW
 extern const char MSG_PAUSED_THERMAL_ERROR[] PROGMEM_I1 = ISTR("PAUSED THERMAL ERROR");////MSG_PAUSED_THERMAL_ERROR c=20
 #ifdef TEMP_MODEL
 extern const char MSG_THERMAL_ANOMALY[] PROGMEM_I1 = ISTR("THERMAL ANOMALY");////MSG_THERMAL_ANOMALY c=20
+extern const char MSG_TM_NOT_CAL[] PROGMEM_I1 = ISTR("Temp model not calibrated yet.");////MSG_TM_NOT_CAL c=20 r=4
 #endif

 //not internationalized messages
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@ -168,6 +168,7 @@ extern const char MSG_IR_UNKNOWN[];
 extern const char MSG_PAUSED_THERMAL_ERROR[];
 #ifdef TEMP_MODEL
 extern const char MSG_THERMAL_ANOMALY[];
+extern const char MSG_TM_NOT_CAL[];
 #endif

 //not internationalized messages
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@ -1055,9 +1055,12 @@ void lcd_commands()
        }
        //if (lcd_commands_step == 1 && calibrated()) {
        if (lcd_commands_step == 1 && temp_model_valid()) {
-            enquecommand_P(PSTR("M500"));
            lcd_commands_step = 0;
            lcd_commands_type = LcdCommands::Idle;
+            enquecommand_P(PSTR("M500"));
+            if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
+                lcd_wizard(WizState::IsFil);
+            }
        }
    }
 #endif //TEMP_MODEL
@ -4034,8 +4037,7 @@ void lcd_wizard(WizState state)
 {
    using S = WizState;
 	bool end = false;
-	int8_t wizard_event;
-	const char *msg = NULL;
+	uint8_t wizard_event;
 	// Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point
 	// other than WizState::Run - it is useful for debugging wizard.
 	if (state != S::Run) eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);
@ -4043,7 +4045,7 @@ void lcd_wizard(WizState state)
    FORCE_BL_ON_START;
 	
    while (!end) {
-		printf_P(PSTR("Wizard state: %d\n"), state);
+		printf_P(PSTR("Wizard state: %d\n"), (uint8_t)state);
 		switch (state) {
 		case S::Run: //Run wizard?
 			
@ -4077,6 +4079,9 @@ void lcd_wizard(WizState state)
 			case CALIBRATION_STATUS_ASSEMBLED: state = S::Selftest; break; //run selftest
 			case CALIBRATION_STATUS_XYZ_CALIBRATION: state = S::Xyz; break; //run xyz cal.
 			case CALIBRATION_STATUS_Z_CALIBRATION: state = S::Z; break; //run z cal.
+#ifdef TEMP_MODEL
+			case CALIBRATION_STATUS_TEMP_MODEL_CALIBRATION: state = S::TempModel; break; //run temp model cal.
+#endif //TEMP_MODEL
 			case CALIBRATION_STATUS_LIVE_ADJUST: state = S::IsFil; break; //run live adjust
 			case CALIBRATION_STATUS_CALIBRATED: end = true; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); break;
 			default: state = S::Selftest; break; //if calibration status is unknown, run wizard from the beginning
@ -4094,8 +4099,14 @@ void lcd_wizard(WizState state)
 		case S::Xyz:
 			lcd_show_fullscreen_message_and_wait_P(_i("I will run xyz calibration now. It will take approx. 12 mins."));////MSG_WIZARD_XYZ_CAL c=20 r=8
 			wizard_event = gcode_M45(false, 0);
-			if (wizard_event) state = S::IsFil;
-			else end = true;
+			if (wizard_event) {
+#ifdef TEMP_MODEL
+			lcd_reset_alert_level();
+			state = S::TempModel;
+#else
+			state = S::IsFil;
+#endif //TEMP_MODEL
+			} else end = true;
 			break;
 		case S::Z:
 			lcd_show_fullscreen_message_and_wait_P(_i("Please remove shipping helpers first."));////MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
@ -4119,6 +4130,13 @@ void lcd_wizard(WizState state)
 			}
 			else end = true;
 			break;
+#ifdef TEMP_MODEL
+		case S::TempModel:
+			lcd_show_fullscreen_message_and_wait_P(_i("Temp model cal. takes approx. 12 mins."));////MSG_TM_CAL c=20 r=4
+			lcd_commands_type = LcdCommands::TempModel;
+			end = true; // Leave wizard temporarily for Temp model cal.
+			break;
+#endif //TEMP_MODEL
 		case S::IsFil:
 		    //start to preheat nozzle and bed to save some time later
 			setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
@ -4185,7 +4203,8 @@ void lcd_wizard(WizState state)
    
    FORCE_BL_ON_END;
    
-	printf_P(_N("Wizard end state: %d\n"), state);
+    const char *msg = NULL;
+	printf_P(_N("Wizard end state: %d\n"), (uint8_t)state);
 	switch (state) { //final message
 	case S::Restore: //printer was already calibrated
 		msg = _T(MSG_WIZARD_DONE);
@ -4195,21 +4214,25 @@ void lcd_wizard(WizState state)
 	case S::Z: //z cal.
 		msg = _T(MSG_WIZARD_CALIBRATION_FAILED);
 		break;
+#ifdef TEMP_MODEL
+	case S::TempModel: //Temp model calibration
+		break;
+#endif //TEMP_MODEL
 	case S::Finish: //we are finished
-
 		msg = _T(MSG_WIZARD_DONE);
 		lcd_reset_alert_level();
 		lcd_setstatuspgm(MSG_WELCOME);
 		lcd_return_to_status(); 
 		break;
-
+    case S::Preheat:
+    case S::Lay1CalCold:
+    case S::Lay1CalHot:
+        break;
 	default:
 		msg = _T(MSG_WIZARD_QUIT);
 		break;
-
 	}
-	if (!((S::Lay1CalCold == state) || (S::Lay1CalHot == state) || (S::Preheat == state)))
-	{
+	if (msg) {
 		lcd_show_fullscreen_message_and_wait_P(msg);
 	}
 	lcd_update_enable(true);
--- a/Firmware/ultralcd.h
+++ b/Firmware/ultralcd.h
@ -224,6 +224,9 @@ enum class WizState : uint8_t
    Selftest,       //!< self test
    Xyz,            //!< xyz calibration
    Z,              //!< z calibration
+#ifdef TEMP_MODEL
+    TempModel,      //!< Temp model calibration
+#endif //TEMP_MODEL
    IsFil,          //!< Is filament loaded? First step of 1st layer calibration
    PreheatPla,     //!< waiting for preheat nozzle for PLA
    Preheat,        //!< Preheat for any material
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@ -1720,6 +1720,17 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr ""
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr ""
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@ -1780,6 +1780,17 @@ msgstr "Prohozene"
 msgid "THERMAL ANOMALY"
 msgstr "TEPLOTNI VYJIMKA"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Kalibrace teplotního modelu trvá asi 12 minut."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Teplotní model zatím nebyl kalibrován."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_da.po
+++ b/lang/po/Firmware_da.po
@ -1731,6 +1731,17 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr ""
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr ""
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@ -1794,6 +1794,17 @@ msgstr "Ausgetauscht"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Tempmodell Kal. benötigt ca. 12 Min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Tempmodell noch unkalibriert."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@ -1797,6 +1797,17 @@ msgstr "Intercambiado"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Cal. modelo temp. tarda 12 mins. aprox."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Modelo temp. todavia sin cal."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@ -1800,6 +1800,17 @@ msgstr "Echange"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE THERMIQUE"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Cal. du modele temp. dure env. 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Modele de temp. non calibre."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_hr.po
+++ b/lang/po/Firmware_hr.po
@ -1787,6 +1787,17 @@ msgstr "Zamjenjeno"
 msgid "THERMAL ANOMALY"
 msgstr "TERMALNA ANOMALIJA"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Temp model kal. traje cca. 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Temp model još nije kalibriran."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_hu.po
+++ b/lang/po/Firmware_hu.po
@ -1789,6 +1789,17 @@ msgstr "Felcserelve"
 msgid "THERMAL ANOMALY"
 msgstr "Homersekl. anomalia"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Hőmérsékleti modell kal. kb. 12 percet."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "A hőmérsékleti modell még nincs kalibrálva."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@ -1790,6 +1790,17 @@ msgstr "Scambiato"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Calib mod temp richiede circa 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Modello temp non calibrato."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_lb.po
+++ b/lang/po/Firmware_lb.po
@ -1731,6 +1731,17 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr ""
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr ""
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_lt.po
+++ b/lang/po/Firmware_lt.po
@ -1731,6 +1731,17 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr ""
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr ""
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_nl.po
+++ b/lang/po/Firmware_nl.po
@ -1796,6 +1796,17 @@ msgstr "Gewisseld"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Temp model kal. duurt ongeveer 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Temp model nog ongekalibreerd."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_no.po
+++ b/lang/po/Firmware_no.po
@ -1771,6 +1771,17 @@ msgstr "Byttet"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISK ANOMALI"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Temp modell kal. tar omtrent 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Temp modell ikke kalibrert enda."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@ -1785,6 +1785,17 @@ msgstr "Zamieniono"
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Kal. modelu temp. moze zajac ok. 12min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Model temp. nie zostal skalib."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_ro.po
+++ b/lang/po/Firmware_ro.po
@ -1787,6 +1787,17 @@ msgstr "inversate"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE TERMICA"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Cal. Model de temp dureaza aprox. 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Modelul de temp. nu este inca calibrat."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_sk.po
+++ b/lang/po/Firmware_sk.po
@ -1779,6 +1779,17 @@ msgstr "Prehodene"
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Výpočet teplotného modelu trvá približne 12 minút."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Teplotný model zatiaľ nebol kalibrovaný"
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_sl.po
+++ b/lang/po/Firmware_sl.po
@ -1731,6 +1731,17 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr ""
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr ""
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@ -1788,6 +1788,17 @@ msgstr "Utbytt"
 msgid "THERMAL ANOMALY"
 msgstr "TERMISK ANOMALI"

+#. MSG_TM_CAL c=20 r=4
+#: ../../Firmware/ultralcd.cpp:4054
+msgid "Temp model cal. takes approx. 12 mins."
+msgstr "Temp modell kal. tar ca. 12 min."
+
+#. MSG_TM_NOT_CAL c=20 r=4
+#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/Marlin_main.cpp:3404
+#: ../../Firmware/messages.cpp:170
+msgid "Temp model not calibrated yet."
+msgstr "Temp-modellen är inte kalibrerad ännu."
+
 #. MSG_TEMPERATURE c=18
 #: ../../Firmware/ultralcd.cpp:4816
 msgid "Temperature"