3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

FSensor - M600 fix + cond. translation + tunning filter and params

Browse Source
This commit is contained in:
Robert Pelnar 2018-07-22 16:14:13 +02:00
parent c6a3f073dd
commit 60b4db15e0
11 changed files with 125 additions and 125 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Firmware/Marlin.h
View File

@ -411,9 +411,6 @@ extern void print_world_coordinates();
extern void print_physical_coordinates();
extern void print_mesh_bed_leveling_table();
#ifdef PAT9125
extern void fsensor_init();
#endif //PAT9125
//estimated time to end of the print
extern uint16_t print_time_remaining();

71
Firmware/Marlin_main.cpp
View File

@ -91,10 +91,9 @@
#include "swi2c.h"
#endif //SWI2C
#ifdef PAT9125
#include "pat9125.h"
#ifdef FILAMENT_SENSOR
#include "fsensor.h"
#endif //PAT9125
#endif //FILAMENT_SENSOR
#ifdef TMC2130
#include "tmc2130.h"
@ -686,12 +685,6 @@ void crashdet_stop_and_save_print2()
void crashdet_detected(uint8_t mask)
{
// printf("CRASH_DETECTED");
/* while (!is_buffer_empty())
{
process_commands();
cmdqueue_pop_front();
}*/
st_synchronize();
static uint8_t crashDet_counter = 0;
bool automatic_recovery_after_crash = true;
@ -854,8 +847,10 @@ void factory_reset(char level, bool quiet)
eeprom_update_word((uint16_t *)EEPROM_FERROR_COUNT_TOT, 0);
eeprom_update_word((uint16_t *)EEPROM_POWER_COUNT_TOT, 0);
fsensor_enable();
#ifdef FILAMENT_SENSOR
fsensor_enable();
fsensor_autoload_set(true);
#endif //FILAMENT_SENSOR
WRITE(BEEPER, HIGH);
_delay_ms(100);
@ -1185,8 +1180,10 @@ void setup()
tmc2130_current_h[E_AXIS] = 36;
tmc2130_current_r[E_AXIS] = 36;
#endif //TMC2130
#ifdef FILAMENT_SENSOR
//disabled filament autoload (PFW360)
fsensor_autoload_set(false);
#endif //FILAMENT_SENSOR
}
MYSERIAL.begin(BAUDRATE);
fdev_setup_stream(uartout, uart_putchar, NULL, _FDEV_SETUP_WRITE); //setup uart out stream
@ -1438,9 +1435,9 @@ void setup()
// It does not make sense to load the correction matrix until the machine is homed.
world2machine_reset();
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_init();
#endif //PAT9125
#endif //FILAMENT_SENSOR
#if defined(CONTROLLERFAN_PIN) && (CONTROLLERFAN_PIN > -1)
@ -1622,9 +1619,9 @@ void setup()
setup_fan_interrupt();
#endif //DEBUG_DISABLE_FANCHECK
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_setup_interrupt();
#endif //PAT9125
#endif //FILAMENT_SENSOR
for (int i = 0; i<4; i++) EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]);
#ifndef DEBUG_DISABLE_STARTMSGS
@ -1977,9 +1974,9 @@ void loop()
isPrintPaused ? manage_inactivity(true) : manage_inactivity(false);
checkHitEndstops();
lcd_update(0);
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_update();
#endif //PAT9125
#endif //FILAMENT_SENSOR
#ifdef TMC2130
tmc2130_check_overtemp();
if (tmc2130_sg_crash)
@ -3075,12 +3072,14 @@ void gcode_M701()
#if defined (SNMM) || defined (SNMM_V2)
extr_adj(snmm_extruder);//loads current extruder
#else
#else //defined (SNMM) || defined (SNMM_V2)
enable_z();
custom_message = true;
custom_message_type = 2;
fsensor_oq_meassure_start();
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_start(40);
#endif //FILAMENT_SENSOR
lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
current_position[E_AXIS] += 40;
@ -3121,6 +3120,7 @@ void gcode_M701()
custom_message = false;
custom_message_type = 0;
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_stop();
if (!fsensor_oq_result())
@ -3131,7 +3131,8 @@ void gcode_M701()
if (disable)
fsensor_disable();
}
#endif
#endif //FILAMENT_SENSOR
#endif //defined (SNMM) || defined (SNMM_V2)
}
/**
* @brief Get serial number from 32U2 processor
@ -3419,6 +3420,7 @@ void process_commands()
} else if(code_seen('G'))
{
gcode_in_progress = (int)code_value();
// printf_P(_N("BEGIN G-CODE=%u\n"), gcode_in_progress);
switch (gcode_in_progress)
{
case 0: // G0 -> G1
@ -4646,6 +4648,7 @@ void process_commands()
default:
printf_P(PSTR("Unknown G code: %s \n"), cmdbuffer + bufindr + CMDHDRSIZE);
}
// printf_P(_N("END G-CODE=%u\n"), gcode_in_progress);
gcode_in_progress = 0;
} // end if(code_seen('G'))
@ -4662,6 +4665,7 @@ void process_commands()
} else
{
mcode_in_progress = (int)code_value();
// printf_P(_N("BEGIN M-CODE=%u\n"), mcode_in_progress);
switch(mcode_in_progress)
{
@ -6969,6 +6973,7 @@ Sigma_Exit:
default:
printf_P(PSTR("Unknown M code: %s \n"), cmdbuffer + bufindr + CMDHDRSIZE);
}
// printf_P(_N("END M-CODE=%u\n"), mcode_in_progress);
mcode_in_progress = 0;
}
} // end if(code_seen('M')) (end of M codes)
@ -7136,10 +7141,10 @@ Sigma_Exit:
dcode_2130(); break;
#endif //TMC2130
#ifdef PAT9125
case 9125: // D9125 - PAT9125
#ifdef FILAMENT_SENSOR
case 9125: // D9125 - FILAMENT_SENSOR
dcode_9125(); break;
#endif //PAT9125
#endif //FILAMENT_SENSOR
}
}
@ -9108,14 +9113,14 @@ void M600_load_filament()
//load_filament_time = millis();
KEEPALIVE_STATE(PAUSED_FOR_USER);
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_autoload_check_start();
#endif //PAT9125
#endif //FILAMENT_SENSOR
while(!lcd_clicked())
{
manage_heater();
manage_inactivity(true);
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
if (fsensor_check_autoload())
{
tone(BEEPER, 1000);
@ -9123,16 +9128,16 @@ void M600_load_filament()
noTone(BEEPER);
break;
}
#endif //PAT9125
#endif //FILAMENT_SENSOR
}
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_autoload_check_stop();
#endif //PAT9125
#endif //FILAMENT_SENSOR
KEEPALIVE_STATE(IN_HANDLER);
#ifdef PAT9125
fsensor_oq_meassure_start();
#endif //PAT9125
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_start(70);
#endif //FILAMENT_SENSOR
M600_load_filament_movements();
@ -9140,7 +9145,7 @@ void M600_load_filament()
delay_keep_alive(50);
noTone(BEEPER);
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_oq_meassure_stop();
if (!fsensor_oq_result())
@ -9151,7 +9156,7 @@ void M600_load_filament()
if (disable)
fsensor_disable();
}
#endif //PAT9125
#endif //FILAMENT_SENSOR
}

2
Firmware/config.h
View File

@ -22,7 +22,7 @@
//#define PAT9125_I2C_ADDR 0x79 //ID=HI
//#define PAT9125_I2C_ADDR 0x73 //ID=NC
#define PAT9125_XRES 0
#define PAT9125_YRES 200
#define PAT9125_YRES 240
//SM4 configuration
#define SM4_DEFDELAY 500 //default step delay [us]

76
Firmware/fsensor.cpp
View File

@ -13,11 +13,11 @@
#define FSENSOR_ERR_MAX 10 //filament sensor maximum error count for runout detection
//Optical quality meassurement params
#define FSENSOR_OQ_MAX_ES 5 //maximum error sum while loading (length 95mm = 144chunks)
#define FSENSOR_OQ_MAX_EM 1 //maximum error counter value while loading
#define FSENSOR_OQ_MAX_ES 6 //maximum error sum while loading (length ~64mm = 100chunks)
#define FSENSOR_OQ_MAX_EM 2 //maximum error counter value while loading
#define FSENSOR_OQ_MIN_YD 2 //minimum yd per chunk (applied to avg value)
#define FSENSOR_OQ_MAX_YD 200 //maximum yd per chunk (applied to avg value)
#define FSENSOR_OQ_MAX_PD 3 //maximum positive deviation (= yd_max/yd_avg)
#define FSENSOR_OQ_MAX_PD 4 //maximum positive deviation (= yd_max/yd_avg)
#define FSENSOR_OQ_MAX_ND 5 //maximum negative deviation (= yd_avg/yd_min)
#define FSENSOR_OQ_MAX_SH 13 //maximum shutter value
@ -51,14 +51,18 @@ bool fsensor_enabled = true;
bool fsensor_watch_runout = true;
//not responding - is set if any communication error occured durring initialization or readout
bool fsensor_not_responding = false;
//printing saved
bool fsensor_printing_saved = false;
//number of errors, updated in ISR
uint8_t fsensor_err_cnt = 0;
//variable for accumolating step count
//variable for accumolating step count (updated callbacks from stepper and ISR)
int16_t fsensor_st_cnt = 0;
//last dy value from pat9125 sensor (used in ISR)
uint8_t fsensor_dy_old = 0;
//log flag: 0=log disabled, 1=log enabled
uint8_t fsensor_log = 1;
uint8_t fsensor_log = 0;
////////////////////////////////////////////////////////////////////////////////
//filament autoload variables
@ -85,7 +89,7 @@ bool fsensor_oq_meassure = false;
//skip-chunk counter, for accurate meassurement is necesary to skip first chunk...
uint8_t fsensor_oq_skipchunk;
//number of samples from start of meassurement
uint8_t fsensor_oq_cnt;
uint8_t fsensor_oq_samples;
//sum of steps in positive direction movements
uint16_t fsensor_oq_st_sum;
//sum of deltas in positive direction movements
@ -114,20 +118,12 @@ void fsensor_init(void)
fsensor_not_responding = true;
}
else
{
fsensor_not_responding = false;
}
puts_P(PSTR("FSensor "));
if (fsensor)
{
fsensor_enable();
puts_P(PSTR("ENABLED\n"));
}
else
{
fsensor_disable();
puts_P(PSTR("DISABLED\n"));
}
printf_P(PSTR("FSensor %S\n"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED\n")));
}
bool fsensor_enable(void)
@ -142,6 +138,7 @@ bool fsensor_enable(void)
fsensor_watch_runout = true;
fsensor_oq_meassure = false;
fsensor_err_cnt = 0;
fsensor_dy_old = 0;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, fsensor_enabled?0x01:0x00);
FSensorStateMenu = fsensor_enabled?1:0;
@ -246,7 +243,7 @@ bool fsensor_check_autoload(void)
if (fsensor_autoload_c != fsensor_autoload_c_old)
printf_P(PSTR("fsensor_check_autoload dy=%d c=%d sum=%d\n"), dy, fsensor_autoload_c, fsensor_autoload_sum);
// if ((fsensor_autoload_c >= 15) && (fsensor_autoload_sum > 30))
if ((fsensor_autoload_c >= 10) && (fsensor_autoload_sum > 20))
if ((fsensor_autoload_c >= 10) && (fsensor_autoload_sum > 15))
{
puts_P(_N("fsensor_check_autoload = true !!!\n"));
return true;
@ -254,11 +251,11 @@ bool fsensor_check_autoload(void)
return false;
}
void fsensor_oq_meassure_start(void)
void fsensor_oq_meassure_start(uint8_t skip)
{
printf_P(PSTR("fsensor_oq_meassure_start\n"));
fsensor_oq_skipchunk = 10;
fsensor_oq_cnt = 0;
fsensor_oq_skipchunk = skip;
fsensor_oq_samples = 0;
fsensor_oq_st_sum = 0;
fsensor_oq_yd_sum = 0;
fsensor_oq_er_sum = 0;
@ -274,12 +271,12 @@ void fsensor_oq_meassure_start(void)
void fsensor_oq_meassure_stop(void)
{
printf_P(PSTR("fsensor_oq_meassure_stop, %hhu samples\n"), fsensor_oq_cnt);
printf_P(PSTR("fsensor_oq_meassure_stop, %hhu samples\n"), fsensor_oq_samples);
printf_P(_N(" st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
printf_P(_N(" yd_min=%u yd_max=%u yd_avg=%u sh_avg=%u\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, (uint16_t)((uint32_t)fsensor_oq_yd_sum * FSENSOR_CHUNK_LEN / fsensor_oq_st_sum), (uint16_t)(fsensor_oq_sh_sum / fsensor_oq_cnt));
printf_P(_N(" yd_min=%u yd_max=%u yd_avg=%u sh_avg=%u\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, (uint16_t)((uint32_t)fsensor_oq_yd_sum * FSENSOR_CHUNK_LEN / fsensor_oq_st_sum), (uint16_t)(fsensor_oq_sh_sum / fsensor_oq_samples));
fsensor_oq_meassure = false;
fsensor_err_cnt = 0;
fsensor_watch_runout = true;
fsensor_err_cnt = 0;
}
const char _OK[] PROGMEM = "OK";
@ -299,7 +296,7 @@ bool fsensor_oq_result(void)
printf_P(_N(" yd_max = %u %S\n"), fsensor_oq_yd_max, (res_yd_max?_OK:_NG));
bool res_yd_min = (fsensor_oq_yd_min >= (yd_avg / FSENSOR_OQ_MAX_ND));
printf_P(_N(" yd_min = %u %S\n"), fsensor_oq_yd_min, (res_yd_min?_OK:_NG));
uint8_t sh_avg = (fsensor_oq_sh_sum / fsensor_oq_cnt);
uint8_t sh_avg = (fsensor_oq_sh_sum / fsensor_oq_samples);
bool res_sh_avg = (sh_avg <= FSENSOR_OQ_MAX_SH);
printf_P(_N(" sh_avg = %hhu %S\n"), sh_avg, (res_sh_avg?_OK:_NG));
bool res = res_er_sum && res_er_max && res_yd_avg && res_yd_max && res_yd_min && res_sh_avg;
@ -329,15 +326,16 @@ ISR(PCINT2_vect)
{ //movement
if (st_cnt > 0) //positive movement
{
if (pat9125_y <= 0)
{
if (pat9125_y < 0)
fsensor_err_cnt++;
}
else
else if (pat9125_y > 0)
{
if (fsensor_err_cnt)
fsensor_err_cnt--;
}
else //(pat9125_y == 0)
if (fsensor_dy_old <= 0)
fsensor_err_cnt++;
if (fsensor_oq_meassure)
{
if (fsensor_oq_skipchunk)
@ -349,10 +347,10 @@ ISR(PCINT2_vect)
{
if (st_cnt == FSENSOR_CHUNK_LEN)
{
if (fsensor_oq_yd_min > pat9125_y) fsensor_oq_yd_min = (fsensor_oq_yd_min + pat9125_y) / 2;
if (fsensor_oq_yd_max < pat9125_y) fsensor_oq_yd_max = (fsensor_oq_yd_max + pat9125_y) / 2;
if (pat9125_y > 0) if (fsensor_oq_yd_min > pat9125_y) fsensor_oq_yd_min = (fsensor_oq_yd_min + pat9125_y) / 2;
if (pat9125_y >= 0) if (fsensor_oq_yd_max < pat9125_y) fsensor_oq_yd_max = (fsensor_oq_yd_max + pat9125_y) / 2;
}
fsensor_oq_cnt++;
fsensor_oq_samples++;
fsensor_oq_st_sum += st_cnt;
fsensor_oq_yd_sum += pat9125_y;
if (fsensor_err_cnt > old_err_cnt)
@ -375,11 +373,13 @@ ISR(PCINT2_vect)
if (fsensor_log)
{
printf_P(_N("FSENSOR cnt=%d dy=%d err=%hhu %S\n"), st_cnt, pat9125_y, fsensor_err_cnt, (fsensor_err_cnt > old_err_cnt)?_N("NG!"):_N("OK"));
printf_P(_N("FSENSOR st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
if (fsensor_oq_meassure) printf_P(_N("FSENSOR st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu yd_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max, fsensor_oq_yd_max);
}
#endif //DEBUG_FSENSOR_LOG
fsensor_dy_old = pat9125_y;
pat9125_y = 0;
_lock = false;
return;
}
@ -408,10 +408,19 @@ void fsensor_st_block_chunk(block_t* bl, int cnt)
void fsensor_update(void)
{
if (fsensor_enabled && fsensor_watch_runout)
if (fsensor_err_cnt > FSENSOR_ERR_MAX)
if (fsensor_enabled)
{
if (fsensor_printing_saved)
{
fsensor_printing_saved = false;
fsensor_watch_runout = true;
fsensor_err_cnt = 0;
fsensor_restore_print_and_continue();
}
else if (fsensor_watch_runout && (fsensor_err_cnt > FSENSOR_ERR_MAX))
{
fsensor_stop_and_save_print();
fsensor_printing_saved = true;
fsensor_err_cnt = 0;
@ -437,6 +446,7 @@ void fsensor_update(void)
fsensor_watch_runout = false;
}
}
}
}
void fsensor_setup_interrupt(void)

2
Firmware/fsensor.h
View File

@ -39,7 +39,7 @@ extern void fsensor_autoload_check_stop(void);
extern bool fsensor_check_autoload(void);
//optical quality meassurement support
extern void fsensor_oq_meassure_start(void);
extern void fsensor_oq_meassure_start(uint8_t skip);
extern void fsensor_oq_meassure_stop(void);
extern bool fsensor_oq_result(void);

10
Firmware/pat9125.c
View File

@ -99,6 +99,9 @@ uint8_t pat9125_rd_reg(uint8_t addr);
void pat9125_wr_reg(uint8_t addr, uint8_t data);
uint8_t pat9125_wr_reg_verify(uint8_t addr, uint8_t data);
extern FILE _uartout;
#define uartout (&_uartout)
uint8_t pat9125_init(void)
{
@ -162,8 +165,11 @@ uint8_t pat9125_init(void)
pat9125_PID1 = pat9125_rd_reg(PAT9125_PID1);
pat9125_PID2 = pat9125_rd_reg(PAT9125_PID2);
#endif //PAT9125_NEW_INIT
pat9125_wr_reg(PAT9125_RES_X, 0);
pat9125_wr_reg(PAT9125_RES_Y, 200);
pat9125_wr_reg(PAT9125_RES_X, PAT9125_XRES);
pat9125_wr_reg(PAT9125_RES_Y, PAT9125_YRES);
fprintf_P(uartout, PSTR("PAT9125_RES_X=%hhu\n"), pat9125_rd_reg(PAT9125_RES_X));
fprintf_P(uartout, PSTR("PAT9125_RES_Y=%hhu\n"), pat9125_rd_reg(PAT9125_RES_Y));
return 1;
}

32
Firmware/stepper.cpp
View File

@ -36,10 +36,10 @@
#include "tmc2130.h"
#endif //TMC2130
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
#include "fsensor.h"
int fsensor_counter = 0; //counter for e-steps
#endif //PAT9125
#endif //FILAMENT_SENSOR
#ifdef DEBUG_STACK_MONITOR
uint16_t SP_min = 0x21FF;
@ -469,10 +469,10 @@ FORCE_INLINE void stepper_next_block()
}
#endif
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_counter = 0;
fsensor_st_block_begin(current_block);
#endif //PAT9125
#endif //FILAMENT_SENSOR
// The busy flag is set by the plan_get_current_block() call.
// current_block->busy = true;
// Initializes the trapezoid generator from the current block. Called whenever a new
@ -760,9 +760,9 @@ FORCE_INLINE void stepper_tick_lowres()
#ifdef LIN_ADVANCE
++ e_steps;
#else
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
++ fsensor_counter;
#endif //PAT9125
#endif //FILAMENT_SENSOR
WRITE(E0_STEP_PIN, INVERT_E_STEP_PIN);
#endif
}
@ -825,9 +825,9 @@ FORCE_INLINE void stepper_tick_highres()
#ifdef LIN_ADVANCE
++ e_steps;
#else
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
++ fsensor_counter;
#endif //PAT9125
#endif //FILAMENT_SENSOR
WRITE(E0_STEP_PIN, INVERT_E_STEP_PIN);
#endif
}
@ -900,9 +900,9 @@ FORCE_INLINE void isr() {
estep_loops = (e_steps & 0x0ff00) ? 4 : e_steps;
if (step_loops < estep_loops)
estep_loops = step_loops;
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_counter += estep_loops;
#endif //PAT9125
#endif //FILAMENT_SENSOR
do {
WRITE_NC(E0_STEP_PIN, !INVERT_E_STEP_PIN);
-- e_steps;
@ -1026,9 +1026,9 @@ FORCE_INLINE void isr() {
if (eISR_Rate == 0) {
// There is not enough time to fit even a single additional tick.
// Tick all the extruder ticks now.
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_counter += e_steps;
#endif //PAT9125
#endif //FILAMENT_SENSOR
MSerial.checkRx(); // Check for serial chars.
do {
WRITE_NC(E0_STEP_PIN, !INVERT_E_STEP_PIN);
@ -1048,21 +1048,21 @@ FORCE_INLINE void isr() {
// If current block is finished, reset pointer
if (step_events_completed.wide >= current_block->step_event_count.wide) {
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
fsensor_st_block_chunk(current_block, fsensor_counter);
fsensor_counter = 0;
#endif //PAT9125
#endif //FILAMENT_SENSOR
current_block = NULL;
plan_discard_current_block();
}
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
else if (fsensor_counter >= fsensor_chunk_len)
{
fsensor_st_block_chunk(current_block, fsensor_counter);
fsensor_counter = 0;
}
#endif //PAT9125
#endif //FILAMENT_SENSOR
}
#ifdef TMC2130

33
Firmware/ultralcd.cpp
View File

@ -23,10 +23,6 @@
#include "SdFatUtil.h"
#ifdef PAT9125
#include "pat9125.h"
#endif //PAT9125
#ifdef FILAMENT_SENSOR
#include "fsensor.h"
#endif //FILAMENT_SENSOR
@ -221,9 +217,9 @@ static void lcd_menu_extruder_info();
static void lcd_menu_xyz_y_min();
static void lcd_menu_xyz_skew();
static void lcd_menu_xyz_offset();
#if defined(TMC2130) || defined(PAT9125)
#if defined(TMC2130) || defined(FILAMENT_SENSOR)
static void lcd_menu_fails_stats();
#endif //TMC2130 or PAT9125
#endif //TMC2130 or FILAMENT_SENSOR
void lcd_finishstatus();
@ -2008,7 +2004,7 @@ static void lcd_menu_extruder_info()
fan_speed_RPM[0] = 60*fan_speed[0];
fan_speed_RPM[1] = 60*fan_speed[1];
#ifdef PAT9125
#ifdef FILAMENT_SENSOR
// Display X and Y difference from Filament sensor
// Display Light intensity from Filament sensor
// Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This
@ -2017,7 +2013,7 @@ static void lcd_menu_extruder_info()
// Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal
// auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small.
// When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46.
pat9125_update();
/* pat9125_update();
lcd_printf_P(_N(
ESC_H(0,0)
"Nozzle FAN: %4d RPM\n"
@ -2029,8 +2025,8 @@ static void lcd_menu_extruder_info()
fan_speed_RPM[1],
pat9125_x, pat9125_y,
pat9125_b, pat9125_s
);
#else //PAT9125
);*/
#else //FILAMENT_SENSOR
printf_P(_N(
ESC_H(0,0)
"Nozzle FAN: %4d RPM\n"
@ -2039,12 +2035,12 @@ static void lcd_menu_extruder_info()
fan_speed_RPM[0],
fan_speed_RPM[1]
);
#endif //PAT9125
#endif //FILAMENT_SENSOR
menu_back_if_clicked();
}
#if defined(TMC2130) && defined(PAT9125)
#if defined(TMC2130) && defined(FILAMENT_SENSOR)
static void lcd_menu_fails_stats_total()
{
//01234567890123456789
@ -2091,7 +2087,7 @@ static void lcd_menu_fails_stats()
MENU_ITEM_SUBMENU_P(PSTR("Total"), lcd_menu_fails_stats_total);
MENU_END();
}
#elif defined(PAT9125)
#elif defined(FILAMENT_SENSOR)
/**
* @brief Print last print and total filament run outs
*
@ -2114,6 +2110,13 @@ static void lcd_menu_fails_stats()
lcd_printf_P(PSTR(ESC_H(0,0) "Last print failures" ESC_H(1,1) "Filam. runouts %-3d" ESC_H(0,2) "Total failures" ESC_H(1,3) "Filam. runouts %-3d"), filamentLast, filamentTotal);
menu_back_if_clicked();
}
#else
static void lcd_menu_fails_stats()
{
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN));
MENU_END();
}
#endif //TMC2130
@ -5955,7 +5958,7 @@ static void lcd_main_menu()
if ( ((fsensor_autoload_enabled == true) && (fsensor_enabled == true)))
MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=17 r=0
else
#endif //PAT9125
#endif //FILAMENT_SENSOR
MENU_ITEM_FUNCTION_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament);
MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament);
#endif
@ -5970,7 +5973,7 @@ static void lcd_main_menu()
MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS c=0 r=0
}
#if defined(TMC2130) || defined(PAT9125)
#if defined(TMC2130) || defined(FILAMENT_SENSOR)
MENU_ITEM_SUBMENU_P(PSTR("Fail stats"), lcd_menu_fails_stats);
#endif

7
Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
View File

@ -264,13 +264,6 @@
#define Z_HIGH_POWER 200
#endif
/*------------------------------------
PAT9125 SETTINGS
*------------------------------------*/
#define PAT9125_XRES 0
#define PAT9125_YRES 255
/*------------------------------------
BED SETTINGS
*------------------------------------*/

7
Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
View File

@ -264,13 +264,6 @@
#define Z_HIGH_POWER 200
#endif
/*------------------------------------
PAT9125 SETTINGS
*------------------------------------*/
#define PAT9125_XRES 0
#define PAT9125_YRES 255
/*------------------------------------
BED SETTINGS
*------------------------------------*/

7
Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
View File

@ -379,13 +379,6 @@
#define DEFAULT_PWM_MOTOR_CURRENT_LOUD {400, 750, 750} // {XY,Z,E}
#endif
/*------------------------------------
PAT9125 SETTINGS
*------------------------------------*/
#define PAT9125_XRES 0
#define PAT9125_YRES 255
/*------------------------------------
BED SETTINGS
*------------------------------------*/