3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Remove TEMP_STAT_LEDS from firmware

Browse Source 
This isn't used by MK3 printers.
It seems to be leftover code from Marlin
This commit is contained in:
Guðni Már Gilbert 2021-12-25 09:41:50 +00:00
parent 0be90dc5d1
commit 63c6373f8d
2 changed files with 0 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Firmware/Configuration.h
View File

@ -489,11 +489,6 @@ your extruder heater takes 2 minutes to hit the target on heating.
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN //#define FAST_PWM_FAN
// Temperature status LEDs that display the hotend and bet temperature.
// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
// Otherwise the RED led is on. There is 1C hysteresis.
//#define TEMP_STAT_LEDS
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not ass annoying as with the hardware PWM. On the other hand, if this frequency // which is not ass annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE. // is too low, you should also increment SOFT_PWM_SCALE.

36
Firmware/Marlin_main.cpp
View File

@ -9814,39 +9814,6 @@ void controllerFan()
} }
#endif #endif
#ifdef TEMP_STAT_LEDS
static bool blue_led = false;
static bool red_led = false;
static uint32_t stat_update = 0;
void handle_status_leds(void) {
float max_temp = 0.0;
if(_millis() > stat_update) {
stat_update += 500; // Update every 0.5s
for (int8_t cur_extruder = 0; cur_extruder < EXTRUDERS; ++cur_extruder) {
max_temp = max(max_temp, degHotend(cur_extruder));
max_temp = max(max_temp, degTargetHotend(cur_extruder));
}
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
max_temp = max(max_temp, degTargetBed());
max_temp = max(max_temp, degBed());
#endif
if((max_temp > 55.0) && (red_led == false)) {
digitalWrite(STAT_LED_RED, 1);
digitalWrite(STAT_LED_BLUE, 0);
red_led = true;
blue_led = false;
}
if((max_temp < 54.0) && (blue_led == false)) {
digitalWrite(STAT_LED_RED, 0);
digitalWrite(STAT_LED_BLUE, 1);
red_led = false;
blue_led = true;
}
}
}
#endif
#ifdef SAFETYTIMER #ifdef SAFETYTIMER
/** /**
* @brief Turn off heating after safetytimer_inactive_time milliseconds of inactivity * @brief Turn off heating after safetytimer_inactive_time milliseconds of inactivity
@ -10090,9 +10057,6 @@ if(0)
WRITE(E0_ENABLE_PIN,oldstatus); WRITE(E0_ENABLE_PIN,oldstatus);
} }
#endif #endif
#ifdef TEMP_STAT_LEDS
handle_status_leds();
#endif
check_axes_activity(); check_axes_activity();
mmu_loop(); mmu_loop();