From 6f203c47359ef9e7d4af7e5cb4983fc03e1f75ab Mon Sep 17 00:00:00 2001
From: akukan <alexandr@prusa3d.cz>
Date: Thu, 27 Oct 2016 15:43:56 +0200
Subject: [PATCH] Farm mode error reporting

---
 Firmware/temperature.cpp |  8 ++++++++
 Firmware/ultralcd.cpp    | 17 +++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/Firmware/temperature.cpp b/Firmware/temperature.cpp
index 80aed98e..d2f6e3f8 100644
--- a/Firmware/temperature.cpp
+++ b/Firmware/temperature.cpp
@@ -1119,7 +1119,9 @@ void temp_runaway_check(int _heater_id, float _target_temperature, float _curren
 
 					if (__preheat_errors > 5)
 					{
+						if (farm_mode) { prusa_statistics(0); }
 						temp_runaway_stop(true);
+						if (farm_mode) { prusa_statistics(91); }
 					}
 					__preheat_start = _current_temperature;
 					__preheat_counter = 0;
@@ -1154,7 +1156,9 @@ void temp_runaway_check(int _heater_id, float _target_temperature, float _curren
 					temp_runaway_error_counter[_heater_id]++;
 					if (temp_runaway_error_counter[_heater_id] * 2 > __timeout)
 					{
+						if (farm_mode) { prusa_statistics(0); }
 						temp_runaway_stop(false);
+						if (farm_mode) { prusa_statistics(90); }
 					}
 				}
 			}
@@ -1269,6 +1273,7 @@ void max_temp_error(uint8_t e) {
     WRITE(BEEPER, 1);
     // fanSpeed will consumed by the check_axes_activity() routine.
     fanSpeed=255;
+	if (farm_mode) { prusa_statistics(93); }
 }
 
 void min_temp_error(uint8_t e) {
@@ -1282,6 +1287,8 @@ void min_temp_error(uint8_t e) {
   #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
   Stop();
   #endif
+  if (farm_mode) { prusa_statistics(92); }
+
 }
 
 void bed_max_temp_error(void) {
@@ -1296,6 +1303,7 @@ void bed_max_temp_error(void) {
   #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
   Stop();
   #endif
+
 }
 
 void bed_min_temp_error(void) {
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 5a332200..6827a60c 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -392,7 +392,7 @@ static void lcd_status_screen()
 		farm_timer--;
 		if (farm_timer < 1)
 		{
-			farm_timer = 90;
+			farm_timer = 180;
 			prusa_statistics(0);
 		}
 		switch (farm_timer)
@@ -1856,7 +1856,20 @@ void prusa_statistics(int _message) {
     case 22: // waiting for filament change
         SERIAL_ECHOLN("{[PRN:5]}");
         break;
-            
+	
+	case 90: // Error - Thermal Runaway
+		SERIAL_ECHOLN("{[ERR:1]}");
+		break;
+	case 91: // Error - Thermal Runaway Preheat
+		SERIAL_ECHOLN("{[ERR:2]}");
+		break;
+	case 92: // Error - Min temp
+		SERIAL_ECHOLN("{[ERR:3]}");
+		break;
+	case 93: // Error - Max temp
+		SERIAL_ECHOLN("{[ERR:4]}");
+		break;
+
     case 99:		// heartbeat
         SERIAL_ECHO("{[PRN:99]");
         prusa_stat_temperatures();