3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #1093 from mkbel/MK3_dev

Browse Source 
Mk3 dev
This commit is contained in:
PavelSindler 2018-09-05 16:47:53 +02:00 committed by GitHub
commit 74113ecf67
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 342 additions and 169 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitignore vendored
View File

@ -12,3 +12,4 @@ Firmware/Doc
/Firmware/Firmware - Shortcut.lnk
/Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h.bak
/Firmware/Marlin_main.cpp~RF12cfae7.TMP
/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h.bak

4
Firmware/Configuration.h
View File

@ -7,8 +7,8 @@
#define STR(x) STR_HELPER(x)
// Firmware version
#define FW_VERSION "3.4.0-RC1"
#define FW_COMMIT_NR 1170
#define FW_VERSION "3.4.0-RC2"
#define FW_COMMIT_NR 1267
// FW_VERSION_UNKNOWN means this is an unofficial build.
// The firmware should only be checked into github with this symbol.
#define FW_DEV_VERSION FW_VERSION_UNKNOWN

2
Firmware/Marlin.h
View File

@ -349,6 +349,7 @@ extern bool sortAlpha;
extern char dir_names[3][9];
extern int8_t lcd_change_fil_state;
// save/restore printing
extern bool saved_printing;
@ -397,7 +398,6 @@ uint8_t check_printer_version();
float temp_compensation_pinda_thermistor_offset(float temperature_pinda);
#endif //PINDA_THERMISTOR
void wait_for_heater(long codenum);
void serialecho_temperatures();
bool check_commands();

341
Firmware/Marlin_main.cpp
View File

@ -544,8 +544,9 @@ static bool saved_extruder_relative_mode = false;
//===========================================================================
static void get_arc_coordinates();
static bool setTargetedHotend(int code);
static bool setTargetedHotend(int code, uint8_t &extruder);
static void print_time_remaining_init();
static void wait_for_heater(long codenum, uint8_t extruder);
uint16_t gcode_in_progress = 0;
uint16_t mcode_in_progress = 0;
@ -1355,6 +1356,7 @@ void setup()
plan_init(); // Initialize planner;
factory_reset();
lcd_encoder_diff=0;
#ifdef TMC2130
uint8_t silentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
@ -3112,8 +3114,25 @@ static void gcode_M600(bool automatic, float x_position, float y_position, float
lcd_update_enable(true);
}
if (mmu_enabled) mmu_M600_load_filament(automatic);
else M600_load_filament();
if (mmu_enabled)
{
if (!automatic) {
if (saved_printing) mmu_eject_filament(mmu_extruder, false); //if M600 was invoked by filament senzor (FINDA) eject filament so user can easily remove it
mmu_M600_wait_and_beep();
if (saved_printing) {
lcd_clear();
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_PLEASE_WAIT));
mmu_command(MMU_CMD_R0);
manage_response(false, false);
}
}
mmu_M600_load_filament(automatic);
}
else
M600_load_filament();
if (!automatic) M600_check_state();
@ -3171,10 +3190,7 @@ void gcode_M701()
custom_message_type = CUSTOM_MSG_TYPE_F_LOAD;
#ifdef FILAMENT_SENSOR
if (mmu_enabled == false)
{
fsensor_oq_meassure_start(40);
}
fsensor_oq_meassure_start(40);
#endif //FILAMENT_SENSOR
lcd_setstatuspgm(_T(MSG_LOADING_FILAMENT));
@ -5349,15 +5365,18 @@ Sigma_Exit:
break;
case 104: // M104
if(setTargetedHotend(104)){
break;
}
if (code_seen('S'))
{
setTargetHotendSafe(code_value(), tmp_extruder);
}
setWatch();
break;
{
uint8_t extruder;
if(setTargetedHotend(104,extruder)){
break;
}
if (code_seen('S'))
{
setTargetHotendSafe(code_value(), extruder);
}
setWatch();
break;
}
case 112: // M112 -Emergency Stop
kill(_n(""), 3);
break;
@ -5365,14 +5384,16 @@ Sigma_Exit:
if (code_seen('S')) setTargetBed(code_value());
break;
case 105 : // M105
if(setTargetedHotend(105)){
{
uint8_t extruder;
if(setTargetedHotend(105, extruder)){
break;
}
#if defined(TEMP_0_PIN) && TEMP_0_PIN > -1
SERIAL_PROTOCOLPGM("ok T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder),1);
SERIAL_PROTOCOL_F(degHotend(extruder),1);
SERIAL_PROTOCOLPGM(" /");
SERIAL_PROTOCOL_F(degTargetHotend(tmp_extruder),1);
SERIAL_PROTOCOL_F(degTargetHotend(extruder),1);
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL_F(degBed(),1);
@ -5397,7 +5418,7 @@ Sigma_Exit:
SERIAL_PROTOCOL((EXTRUDER_WATTS * getHeaterPower(tmp_extruder))/127);
SERIAL_PROTOCOLPGM("W");
#else
SERIAL_PROTOCOL(getHeaterPower(tmp_extruder));
SERIAL_PROTOCOL(getHeaterPower(extruder));
#endif
SERIAL_PROTOCOLPGM(" B@:");
@ -5455,9 +5476,11 @@ Sigma_Exit:
KEEPALIVE_STATE(NOT_BUSY);
return;
break;
}
case 109:
{// M109 - Wait for extruder heater to reach target.
if(setTargetedHotend(109)){
uint8_t extruder;
if(setTargetedHotend(109, extruder)){
break;
}
LCD_MESSAGERPGM(_T(MSG_HEATING));
@ -5468,10 +5491,10 @@ Sigma_Exit:
autotemp_enabled=false;
#endif
if (code_seen('S')) {
setTargetHotendSafe(code_value(), tmp_extruder);
setTargetHotendSafe(code_value(), extruder);
CooldownNoWait = true;
} else if (code_seen('R')) {
setTargetHotendSafe(code_value(), tmp_extruder);
setTargetHotendSafe(code_value(), extruder);
CooldownNoWait = false;
}
#ifdef AUTOTEMP
@ -5488,13 +5511,13 @@ Sigma_Exit:
codenum = millis();
/* See if we are heating up or cooling down */
target_direction = isHeatingHotend(tmp_extruder); // true if heating, false if cooling
target_direction = isHeatingHotend(extruder); // true if heating, false if cooling
KEEPALIVE_STATE(NOT_BUSY);
cancel_heatup = false;
wait_for_heater(codenum); //loops until target temperature is reached
wait_for_heater(codenum, extruder); //loops until target temperature is reached
LCD_MESSAGERPGM(_T(MSG_HEATING_COMPLETE));
KEEPALIVE_STATE(IN_HANDLER);
@ -6020,25 +6043,26 @@ Sigma_Exit:
#if EXTRUDERS > 1
case 218: // M218 - set hotend offset (in mm), T<extruder_number> X<offset_on_X> Y<offset_on_Y>
{
if(setTargetedHotend(218)){
uint8_t extruder;
if(setTargetedHotend(218, extruder)){
break;
}
if(code_seen('X'))
{
extruder_offset[X_AXIS][tmp_extruder] = code_value();
extruder_offset[X_AXIS][extruder] = code_value();
}
if(code_seen('Y'))
{
extruder_offset[Y_AXIS][tmp_extruder] = code_value();
extruder_offset[Y_AXIS][extruder] = code_value();
}
SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_HOTEND_OFFSET);
for(tmp_extruder = 0; tmp_extruder < EXTRUDERS; tmp_extruder++)
for(extruder = 0; extruder < EXTRUDERS; extruder++)
{
SERIAL_ECHO(" ");
SERIAL_ECHO(extruder_offset[X_AXIS][tmp_extruder]);
SERIAL_ECHO(extruder_offset[X_AXIS][extruder]);
SERIAL_ECHO(",");
SERIAL_ECHO(extruder_offset[Y_AXIS][tmp_extruder]);
SERIAL_ECHO(extruder_offset[Y_AXIS][extruder]);
}
SERIAL_ECHOLN("");
}break;
@ -6058,10 +6082,11 @@ Sigma_Exit:
int tmp_code = code_value();
if (code_seen('T'))
{
if(setTargetedHotend(221)){
uint8_t extruder;
if(setTargetedHotend(221, extruder)){
break;
}
extruder_multiply[tmp_extruder] = tmp_code;
extruder_multiply[extruder] = tmp_code;
}
else
{
@ -6789,132 +6814,132 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
else if(code_seen('T'))
{
int index;
st_synchronize();
for (index = 1; *(strchr_pointer + index) == ' ' || *(strchr_pointer + index) == '\t'; index++);
if ((*(strchr_pointer + index) < '0' || *(strchr_pointer + index) > '9') && *(strchr_pointer + index) != '?') {
SERIAL_ECHOLNPGM("Invalid T code.");
}
else {
if (*(strchr_pointer + index) == '?') {
tmp_extruder = choose_extruder_menu();
}
else {
tmp_extruder = code_value();
}
snmm_filaments_used |= (1 << tmp_extruder); //for stop print
int index;
st_synchronize();
for (index = 1; *(strchr_pointer + index) == ' ' || *(strchr_pointer + index) == '\t'; index++);
if (mmu_enabled)
{
//printf_P(PSTR("T code: %d \n"), tmp_extruder);
//mmu_printf_P(PSTR("T%d\n"), tmp_extruder);
mmu_command(MMU_CMD_T0 + tmp_extruder);
if ((*(strchr_pointer + index) < '0' || *(strchr_pointer + index) > '4') && *(strchr_pointer + index) != '?') {
SERIAL_ECHOLNPGM("Invalid T code.");
}
else {
if (*(strchr_pointer + index) == '?') {
tmp_extruder = choose_extruder_menu();
}
else {
tmp_extruder = code_value();
}
snmm_filaments_used |= (1 << tmp_extruder); //for stop print
manage_response(true, true);
mmu_command(MMU_CMD_C0);
mmu_extruder = tmp_extruder; //filament change is finished
if (mmu_enabled)
{
mmu_command(MMU_CMD_T0 + tmp_extruder);
if (*(strchr_pointer + index) == '?')// for single material usage with mmu
mmu_load_to_nozzle();
}
else
{
manage_response(true, true);
mmu_command(MMU_CMD_C0);
mmu_extruder = tmp_extruder; //filament change is finished
if (*(strchr_pointer + index) == '?')// for single material usage with mmu
{
mmu_load_to_nozzle();
}
}
else
{
#ifdef SNMM
#ifdef LIN_ADVANCE
if (mmu_extruder != tmp_extruder)
clear_current_adv_vars(); //Check if the selected extruder is not the active one and reset LIN_ADVANCE variables if so.
#endif
mmu_extruder = tmp_extruder;
#ifdef LIN_ADVANCE
if (mmu_extruder != tmp_extruder)
clear_current_adv_vars(); //Check if the selected extruder is not the active one and reset LIN_ADVANCE variables if so.
#endif
delay(100);
mmu_extruder = tmp_extruder;
disable_e0();
disable_e1();
disable_e2();
pinMode(E_MUX0_PIN, OUTPUT);
pinMode(E_MUX1_PIN, OUTPUT);
delay(100);
delay(100);
SERIAL_ECHO_START;
SERIAL_ECHO("T:");
SERIAL_ECHOLN((int)tmp_extruder);
switch (tmp_extruder) {
case 1:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, LOW);
disable_e0();
disable_e1();
disable_e2();
break;
case 2:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, HIGH);
pinMode(E_MUX0_PIN, OUTPUT);
pinMode(E_MUX1_PIN, OUTPUT);
break;
case 3:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, HIGH);
delay(100);
SERIAL_ECHO_START;
SERIAL_ECHO("T:");
SERIAL_ECHOLN((int)tmp_extruder);
switch (tmp_extruder) {
case 1:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, LOW);
break;
default:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, LOW);
break;
case 2:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, HIGH);
break;
}
delay(100);
break;
case 3:
WRITE(E_MUX0_PIN, HIGH);
WRITE(E_MUX1_PIN, HIGH);
break;
default:
WRITE(E_MUX0_PIN, LOW);
WRITE(E_MUX1_PIN, LOW);
break;
}
delay(100);
#else //SNMM
if (tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_ECHOPGM("T");
SERIAL_PROTOCOLLN((int)tmp_extruder);
SERIAL_ECHOLNRPGM(_n("Invalid extruder"));////MSG_INVALID_EXTRUDER c=0 r=0
}
else {
#if EXTRUDERS > 1
boolean make_move = false;
#endif
if (code_seen('F')) {
#if EXTRUDERS > 1
make_move = true;
#endif
next_feedrate = code_value();
if (next_feedrate > 0.0) {
feedrate = next_feedrate;
}
}
#if EXTRUDERS > 1
if (tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset
memcpy(destination, current_position, sizeof(destination));
// Offset extruder (only by XY)
int i;
for (i = 0; i < 2; i++) {
current_position[i] = current_position[i] -
extruder_offset[i][active_extruder] +
extruder_offset[i][tmp_extruder];
}
// Set the new active extruder and position
active_extruder = tmp_extruder;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
// Move to the old position if 'F' was in the parameters
if (make_move && Stopped == false) {
prepare_move();
}
}
#endif
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n("Active Extruder: "));////MSG_ACTIVE_EXTRUDER c=0 r=0
SERIAL_PROTOCOLLN((int)active_extruder);
}
if (tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_ECHOPGM("T");
SERIAL_PROTOCOLLN((int)tmp_extruder);
SERIAL_ECHOLNRPGM(_n("Invalid extruder"));////MSG_INVALID_EXTRUDER c=0 r=0
}
else {
#if EXTRUDERS > 1
boolean make_move = false;
#endif
if (code_seen('F')) {
#if EXTRUDERS > 1
make_move = true;
#endif
next_feedrate = code_value();
if (next_feedrate > 0.0) {
feedrate = next_feedrate;
}
}
#if EXTRUDERS > 1
if (tmp_extruder != active_extruder) {
// Save current position to return to after applying extruder offset
memcpy(destination, current_position, sizeof(destination));
// Offset extruder (only by XY)
int i;
for (i = 0; i < 2; i++) {
current_position[i] = current_position[i] -
extruder_offset[i][active_extruder] +
extruder_offset[i][tmp_extruder];
}
// Set the new active extruder and position
active_extruder = tmp_extruder;
plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
// Move to the old position if 'F' was in the parameters
if (make_move && Stopped == false) {
prepare_move();
}
}
#endif
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n("Active Extruder: "));////MSG_ACTIVE_EXTRUDER c=0 r=0
SERIAL_PROTOCOLLN((int)active_extruder);
}
#endif //SNMM
}
}
}
}
} // end if(code_seen('T')) (end of T codes)
else if (code_seen('D')) // D codes (debug)
@ -7567,11 +7592,21 @@ void setPwmFrequency(uint8_t pin, int val)
}
#endif //FAST_PWM_FAN
bool setTargetedHotend(int code){
tmp_extruder = active_extruder;
//! @brief Get and validate extruder number
//!
//! If it is not specified, active_extruder is returned in parameter extruder.
//! @param [in] code M code number
//! @param [out] extruder
//! @return error
//! @retval true Invalid extruder specified in T code
//! @retval false Valid extruder specified in T code, or not specifiead
bool setTargetedHotend(int code, uint8_t &extruder)
{
extruder = active_extruder;
if(code_seen('T')) {
tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) {
extruder = code_value();
if(extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
switch(code){
case 104:
@ -7590,7 +7625,7 @@ bool setTargetedHotend(int code){
SERIAL_ECHO(_i("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0
break;
}
SERIAL_PROTOCOLLN((int)tmp_extruder);
SERIAL_PROTOCOLLN((int)extruder);
return true;
}
}
@ -7655,7 +7690,7 @@ void delay_keep_alive(unsigned int ms)
}
}
void wait_for_heater(long codenum) {
static void wait_for_heater(long codenum, uint8_t extruder) {
#ifdef TEMP_RESIDENCY_TIME
long residencyStart;
@ -7671,9 +7706,9 @@ void wait_for_heater(long codenum) {
{ //Print Temp Reading and remaining time every 1 second while heating up/cooling down
if (!farm_mode) {
SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOL_F(degHotend(tmp_extruder), 1);
SERIAL_PROTOCOL_F(degHotend(extruder), 1);
SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL((int)tmp_extruder);
SERIAL_PROTOCOL((int)extruder);
#ifdef TEMP_RESIDENCY_TIME
SERIAL_PROTOCOLPGM(" W:");
@ -7698,9 +7733,9 @@ void wait_for_heater(long codenum) {
#ifdef TEMP_RESIDENCY_TIME
/* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
or when current temp falls outside the hysteresis after target temp was reached */
if ((residencyStart == -1 && target_direction && (degHotend(tmp_extruder) >= (degTargetHotend(tmp_extruder) - TEMP_WINDOW))) ||
(residencyStart == -1 && !target_direction && (degHotend(tmp_extruder) <= (degTargetHotend(tmp_extruder) + TEMP_WINDOW))) ||
(residencyStart > -1 && labs(degHotend(tmp_extruder) - degTargetHotend(tmp_extruder)) > TEMP_HYSTERESIS))
if ((residencyStart == -1 && target_direction && (degHotend(extruder) >= (degTargetHotend(extruder) - TEMP_WINDOW))) ||
(residencyStart == -1 && !target_direction && (degHotend(extruder) <= (degTargetHotend(extruder) + TEMP_WINDOW))) ||
(residencyStart > -1 && labs(degHotend(extruder) - degTargetHotend(extruder)) > TEMP_HYSTERESIS))
{
residencyStart = millis();
}

105
Firmware/mmu.cpp
View File

@ -22,7 +22,7 @@
#define MMU_HWRESET
#define MMU_RST_PIN 76
#define MMU_REQUIRED_FW_BUILDNR 81
#define MMU_REQUIRED_FW_BUILDNR 83
bool mmu_enabled = false;
@ -104,6 +104,7 @@ void mmu_init(void)
//mmu main loop - state machine processing
void mmu_loop(void)
{
int filament = 0;
// printf_P(PSTR("MMU loop, state=%d\n"), mmu_state);
switch (mmu_state)
{
@ -161,14 +162,14 @@ void mmu_loop(void)
{
if ((mmu_cmd >= MMU_CMD_T0) && (mmu_cmd <= MMU_CMD_T4))
{
int extruder = mmu_cmd - MMU_CMD_T0;
printf_P(PSTR("MMU <= 'T%d'\n"), extruder);
mmu_printf_P(PSTR("T%d\n"), extruder);
filament = mmu_cmd - MMU_CMD_T0;
printf_P(PSTR("MMU <= 'T%d'\n"), filament);
mmu_printf_P(PSTR("T%d\n"), filament);
mmu_state = 3; // wait for response
}
else if ((mmu_cmd >= MMU_CMD_L0) && (mmu_cmd <= MMU_CMD_L4))
{
int filament = mmu_cmd - MMU_CMD_L0;
filament = mmu_cmd - MMU_CMD_L0;
printf_P(PSTR("MMU <= 'L%d'\n"), filament);
mmu_printf_P(PSTR("L%d\n"), filament);
mmu_state = 3; // wait for response
@ -185,6 +186,19 @@ void mmu_loop(void)
mmu_puts_P(PSTR("U0\n")); //send 'unload current filament'
mmu_state = 3;
}
else if ((mmu_cmd >= MMU_CMD_E0) && (mmu_cmd <= MMU_CMD_E4))
{
int filament = mmu_cmd - MMU_CMD_E0;
printf_P(PSTR("MMU <= 'E%d'\n"), filament);
mmu_printf_P(PSTR("E%d\n"), filament); //send eject filament
mmu_state = 3; // wait for response
}
else if (mmu_cmd == MMU_CMD_R0)
{
printf_P(PSTR("MMU <= 'R0'\n"));
mmu_puts_P(PSTR("R0\n")); //send recover after eject
mmu_state = 3; // wait for response
}
mmu_cmd = 0;
}
else if ((mmu_last_response + 300) < millis()) //request every 300ms
@ -215,7 +229,7 @@ void mmu_loop(void)
mmu_state = 1;
}
return;
case 3: //response to commands T0-T4
case 3: //response to mmu commands
if (mmu_rx_ok() > 0)
{
printf_P(PSTR("MMU => 'ok'\n"));
@ -381,6 +395,12 @@ void manage_response(bool move_axes, bool turn_off_nozzle)
if (lcd_update_was_enabled) lcd_update_enable(true);
}
//! @brief load filament to nozzle of multimaterial printer
//!
//! This function is used only only after T? (user select filament) and M600 (change filament).
//! It is not used after T0 .. T4 command (select filament), in such case, gcode is responsible for loading
//! filament to nozzle.
//!
void mmu_load_to_nozzle()
{
st_synchronize();
@ -449,15 +469,12 @@ void mmu_M600_load_filament(bool automatic)
bool yes = false;
tmp_extruder = mmu_extruder;
if (!automatic) {
mmu_M600_wait_and_beep();
#ifdef MMU_M600_SWITCH_EXTRUDER
yes = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Do you want to switch extruder?"), false);
if(yes) tmp_extruder = choose_extruder_menu();
else tmp_extruder = mmu_extruder;
#else
tmp_extruder = mmu_extruder;
#endif //MMU_M600_SWITCH_EXTRUDER
}
}
else {
tmp_extruder = (tmp_extruder+1)%5;
}
@ -775,6 +792,31 @@ void extr_adj_4()
#endif
}
void mmu_eject_fil_0()
{
mmu_eject_filament(0, true);
}
void mmu_eject_fil_1()
{
mmu_eject_filament(1, true);
}
void mmu_eject_fil_2()
{
mmu_eject_filament(2, true);
}
void mmu_eject_fil_3()
{
mmu_eject_filament(3, true);
}
void mmu_eject_fil_4()
{
mmu_eject_filament(4, true);
}
void load_all()
{
#ifndef SNMM
@ -905,3 +947,46 @@ void mmu_show_warning()
printf_P(PSTR("MMU2 firmware version invalid. Required version: build number %d or higher."), MMU_REQUIRED_FW_BUILDNR);
kill(_i("Please update firmware in your MMU2. Waiting for reset."));
}
void mmu_eject_filament(uint8_t filament, bool recover)
{
if (filament < 5)
{
if (degHotend0() > EXTRUDE_MINTEMP)
{
st_synchronize();
lcd_update_enable(false);
lcd_clear();
lcd_set_cursor(0, 1); lcd_puts_P(_i("Ejecting filament"));
current_position[E_AXIS] -= 80;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 2500 / 60, active_extruder);
st_synchronize();
lcd_update_enable(true);
mmu_command(MMU_CMD_E0 + filament);
manage_response(false, false);
if (recover)
{
lcd_show_fullscreen_message_and_wait_P(_i("Please remove filament and then press the knob."));
mmu_command(MMU_CMD_R0);
manage_response(false, false);
}
}
else
{
lcd_clear();
lcd_set_cursor(0, 0);
lcd_puts_P(_T(MSG_ERROR));
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_PREHEAT_NOZZLE));
delay(2000);
lcd_clear();
}
}
else
{
puts_P(PSTR("Filament nr out of range!"));
}
}

14
Firmware/mmu.h
View File

@ -28,6 +28,13 @@ extern int16_t mmu_buildnr;
#define MMU_CMD_L4 0x24
#define MMU_CMD_C0 0x30
#define MMU_CMD_U0 0x40
#define MMU_CMD_E0 0x50
#define MMU_CMD_E1 0x51
#define MMU_CMD_E2 0x52
#define MMU_CMD_E3 0x53
#define MMU_CMD_E4 0x54
#define MMU_CMD_R0 0x60
extern int mmu_puts_P(const char* str);
@ -82,4 +89,9 @@ extern void extr_unload_4();
extern bool mmu_check_version();
extern void mmu_show_warning();
extern void mmu_eject_filament(uint8_t filament, bool recover);
extern void mmu_eject_fil_0();
extern void mmu_eject_fil_1();
extern void mmu_eject_fil_2();
extern void mmu_eject_fil_3();
extern void mmu_eject_fil_4();

43
Firmware/ultralcd.cpp
View File

@ -3551,6 +3551,27 @@ void lcd_diag_show_end_stops()
lcd_return_to_status();
}
#ifdef TMC2130
static void lcd_show_pinda_state()
{
lcd_set_cursor(0, 0);
lcd_puts_P((PSTR("P.I.N.D.A. state")));
lcd_set_cursor(0, 2);
lcd_puts_P(READ(Z_MIN_PIN)?(PSTR("Z1 (LED off)")):(PSTR("Z0 (LED on) "))); // !!! both strings must have same length (due to dynamic refreshing)
}
static void menu_show_pinda_state()
{
lcd_timeoutToStatus.stop();
lcd_show_pinda_state();
if(LCD_CLICKED)
{
lcd_timeoutToStatus.start();
menu_back();
}
}
#endif // defined TMC2130
void prusa_statistics(int _message, uint8_t _fil_nr) {
@ -4379,6 +4400,7 @@ void lcd_wizard(int state) {
break;
case 5: //is filament loaded?
//start to preheat nozzle and bed to save some time later
lcd_commands_type = LCD_COMMAND_V2_CAL;
setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0);
setTargetBed(PLA_PREHEAT_HPB_TEMP);
wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is filament loaded?"), false);////MSG_WIZARD_FILAMENT_LOADED c=20 r=2
@ -4416,6 +4438,7 @@ void lcd_wizard(int state) {
#ifdef SNMM
change_extr(0);
#endif
loading_flag = true;
gcode_M701();
state = 9;
break;
@ -4784,7 +4807,9 @@ static void lcd_calibration_menu()
MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU c=0 r=0
MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17 r=1
#ifndef TMC2130
#ifdef TMC2130
MENU_ITEM_SUBMENU_P(_i("Show pinda state"), menu_show_pinda_state);
#else
MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=17 r=1
#endif
#ifndef MK1BP
@ -5171,6 +5196,19 @@ static void fil_load_menu()
MENU_END();
}
static void mmu_fil_eject_menu()
{
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN));
MENU_ITEM_FUNCTION_P(_i("Eject filament 1"), mmu_eject_fil_0);
MENU_ITEM_FUNCTION_P(_i("Eject filament 2"), mmu_eject_fil_1);
MENU_ITEM_FUNCTION_P(_i("Eject filament 3"), mmu_eject_fil_2);
MENU_ITEM_FUNCTION_P(_i("Eject filament 4"), mmu_eject_fil_3);
MENU_ITEM_FUNCTION_P(_i("Eject filament 5"), mmu_eject_fil_4);
MENU_END();
}
static void fil_unload_menu()
{
MENU_BEGIN();
@ -5552,7 +5590,7 @@ static void lcd_main_menu()
}*/
if ( ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL)) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) && !homing_flag && !mesh_bed_leveling_flag)
{
MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);//8
@ -5621,6 +5659,7 @@ static void lcd_main_menu()
if (mmu_enabled)
{
MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), fil_load_menu);
MENU_ITEM_SUBMENU_P(_i("Eject filament"), mmu_fil_eject_menu);
if (mmu_enabled)
MENU_ITEM_GCODE_P(_T(MSG_UNLOAD_FILAMENT), PSTR("M702 C"));
else

1
Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
View File

@ -183,6 +183,7 @@
#define CMD_DIAGNOSTICS //Show cmd queue length on printer display
#endif /* DEBUG_BUILD */
#define LINEARITY_CORRECTION
#define TMC2130_LINEARITY_CORRECTION
#define TMC2130_LINEARITY_CORRECTION_XYZ
//#define TMC2130_VARIABLE_RESOLUTION