3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #1804 from ondratu/MK3

Browse Source 
PFW-688
This commit is contained in:
Marek Běl 2019-05-07 13:24:49 +00:00 committed by GitHub
commit 744e48272b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
18 changed files with 1177 additions and 1100 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
Firmware/Marlin_main.cpp
View File

@ -1194,9 +1194,9 @@ void setup()
#ifdef STRING_VERSION_CONFIG_H
#ifdef STRING_CONFIG_H_AUTHOR
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n(" Last Updated: "));////MSG_CONFIGURATION_VER c=0 r=0
SERIAL_ECHORPGM(_n(" Last Updated: "));////MSG_CONFIGURATION_VER
SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
SERIAL_ECHORPGM(_n(" | Author: "));////MSG_AUTHOR c=0 r=0
SERIAL_ECHORPGM(_n(" | Author: "));////MSG_AUTHOR
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
SERIAL_ECHOPGM("Compiled: ");
SERIAL_ECHOLNPGM(__DATE__);
@ -1204,9 +1204,9 @@ void setup()
#endif
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n(" Free Memory: "));////MSG_FREE_MEMORY c=0 r=0
SERIAL_ECHORPGM(_n(" Free Memory: "));////MSG_FREE_MEMORY
SERIAL_ECHO(freeMemory());
SERIAL_ECHORPGM(_n(" PlannerBufferBytes: "));////MSG_PLANNER_BUFFER_BYTES c=0 r=0
SERIAL_ECHORPGM(_n(" PlannerBufferBytes: "));////MSG_PLANNER_BUFFER_BYTES
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
//lcd_update_enable(false); // why do we need this?? - andre
// loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
@ -2977,7 +2977,7 @@ void gcode_M114()
SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL(current_position[E_AXIS]);
SERIAL_PROTOCOLRPGM(_n(" Count X: "));////MSG_COUNT_X c=0 r=0
SERIAL_PROTOCOLRPGM(_n(" Count X: "));////MSG_COUNT_X
SERIAL_PROTOCOL(float(st_get_position(X_AXIS)) / cs.axis_steps_per_unit[X_AXIS]);
SERIAL_PROTOCOLPGM(" Y:");
SERIAL_PROTOCOL(float(st_get_position(Y_AXIS)) / cs.axis_steps_per_unit[Y_AXIS]);
@ -3822,7 +3822,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
if(codenum != 0) LCD_MESSAGERPGM(_n("Sleep..."));////MSG_DWELL c=0 r=0
if(codenum != 0) LCD_MESSAGERPGM(_n("Sleep..."));////MSG_DWELL
st_synchronize();
codenum += _millis(); // keep track of when we started waiting
previous_millis_cmd = _millis();
@ -4960,7 +4960,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
if (!hasP && !hasS && *src != '\0') {
lcd_setstatus(src);
} else {
LCD_MESSAGERPGM(_i("Wait for user..."));////MSG_USERWAIT c=0 r=0
LCD_MESSAGERPGM(_i("Wait for user..."));////MSG_USERWAIT
}
lcd_ignore_click(); //call lcd_ignore_click aslo for else ???
@ -4986,7 +4986,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
}
break;
case 17:
LCD_MESSAGERPGM(_i("No move."));////MSG_NO_MOVE c=0 r=0
LCD_MESSAGERPGM(_i("No move."));////MSG_NO_MOVE
enable_x();
enable_y();
enable_z();
@ -4997,9 +4997,9 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
#ifdef SDSUPPORT
case 20: // M20 - list SD card
SERIAL_PROTOCOLLNRPGM(_N("Begin file list"));////MSG_BEGIN_FILE_LIST c=0 r=0
SERIAL_PROTOCOLLNRPGM(_N("Begin file list"));////MSG_BEGIN_FILE_LIST
card.ls();
SERIAL_PROTOCOLLNRPGM(_N("End file list"));////MSG_END_FILE_LIST c=0 r=0
SERIAL_PROTOCOLLNRPGM(_N("End file list"));////MSG_END_FILE_LIST
break;
case 21: // M21 - init SD card
@ -5555,7 +5555,7 @@ Sigma_Exit:
}
#else
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_i("No thermistors - no temperature"));////MSG_ERR_NO_THERMISTORS c=0 r=0
SERIAL_ERRORLNRPGM(_i("No thermistors - no temperature"));////MSG_ERR_NO_THERMISTORS
#endif
SERIAL_PROTOCOLPGM(" @:");
@ -5905,10 +5905,10 @@ Sigma_Exit:
enable_endstops(true) ;
break;
case 119: // M119
SERIAL_PROTOCOLRPGM(_N("Reporting endstop status"));////MSG_M119_REPORT c=0 r=0
SERIAL_PROTOCOLRPGM(_N("Reporting endstop status"));////MSG_M119_REPORT
SERIAL_PROTOCOLLN("");
#if defined(X_MIN_PIN) && X_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN c=0 r=0
SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN
if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{
@ -5917,7 +5917,7 @@ Sigma_Exit:
SERIAL_PROTOCOLLN("");
#endif
#if defined(X_MAX_PIN) && X_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX c=0 r=0
SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX
if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{
@ -5926,7 +5926,7 @@ Sigma_Exit:
SERIAL_PROTOCOLLN("");
#endif
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN c=0 r=0
SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN
if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{
@ -5935,7 +5935,7 @@ Sigma_Exit:
SERIAL_PROTOCOLLN("");
#endif
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX c=0 r=0
SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX
if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{
@ -5986,7 +5986,7 @@ Sigma_Exit:
extruder = code_value();
if(extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
SERIAL_ECHO(_n("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHO(_n("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER
break;
}
}
@ -7125,7 +7125,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
SERIAL_ECHO_START;
SERIAL_ECHOPGM("T");
SERIAL_PROTOCOLLN((int)tmp_extruder);
SERIAL_ECHOLNRPGM(_n("Invalid extruder"));////MSG_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHOLNRPGM(_n("Invalid extruder"));////MSG_INVALID_EXTRUDER
}
else {
#if EXTRUDERS > 1
@ -7161,7 +7161,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
}
#endif
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n("Active Extruder: "));////MSG_ACTIVE_EXTRUDER c=0 r=0
SERIAL_ECHORPGM(_n("Active Extruder: "));////MSG_ACTIVE_EXTRUDER
SERIAL_PROTOCOLLN((int)active_extruder);
}
@ -7617,7 +7617,7 @@ static void handleSafetyTimer()
{
setTargetBed(0);
setAllTargetHotends(0);
lcd_show_fullscreen_message_and_wait_P(_i("Heating disabled by safety timer."));////MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
lcd_show_fullscreen_message_and_wait_P(_i("Heating disabled by safety timer."));////MSG_BED_HEATING_SAFETY_DISABLED
}
}
#endif //SAFETYTIMER
@ -7796,12 +7796,12 @@ void kill(const char *full_screen_message, unsigned char id)
pinMode(PS_ON_PIN,INPUT);
#endif
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_n("Printer halted. kill() called!"));////MSG_ERR_KILLED c=0 r=0
SERIAL_ERRORLNRPGM(_n("Printer halted. kill() called!"));////MSG_ERR_KILLED
if (full_screen_message != NULL) {
SERIAL_ERRORLNRPGM(full_screen_message);
lcd_display_message_fullscreen_P(full_screen_message);
} else {
LCD_ALERTMESSAGERPGM(_n("KILLED. "));////MSG_KILLED c=0 r=0
LCD_ALERTMESSAGERPGM(_n("KILLED. "));////MSG_KILLED
}
// FMC small patch to update the LCD before ending
@ -7925,19 +7925,19 @@ bool setTargetedHotend(int code, uint8_t &extruder)
SERIAL_ECHO_START;
switch(code){
case 104:
SERIAL_ECHORPGM(_n("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHORPGM(_n("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER
break;
case 105:
SERIAL_ECHO(_n("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHO(_n("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER
break;
case 109:
SERIAL_ECHO(_n("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHO(_n("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER
break;
case 218:
SERIAL_ECHO(_n("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHO(_n("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER
break;
case 221:
SERIAL_ECHO(_n("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0
SERIAL_ECHO(_n("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER
break;
}
SERIAL_PROTOCOLLN((int)extruder);

22
Firmware/cardreader.cpp
View File

@ -94,7 +94,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
if (!dir.open(parent, lfilename, O_READ)) {
if (lsAction == LS_SerialPrint) {
//SERIAL_ECHO_START();
//SERIAL_ECHOPGM(_i("Cannot open subdir"));////MSG_SD_CANT_OPEN_SUBDIR c=0 r=0
//SERIAL_ECHOPGM(_i("Cannot open subdir"));////MSG_SD_CANT_OPEN_SUBDIR
//SERIAL_ECHOLN(lfilename);
}
}
@ -183,23 +183,23 @@ void CardReader::initsd()
{
//if (!card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_n("SD init fail"));////MSG_SD_INIT_FAIL c=0 r=0
SERIAL_ECHOLNRPGM(_n("SD init fail"));////MSG_SD_INIT_FAIL
}
else if (!volume.init(&card))
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_n("volume.init failed"));////MSG_SD_VOL_INIT_FAIL c=0 r=0
SERIAL_ERRORLNRPGM(_n("volume.init failed"));////MSG_SD_VOL_INIT_FAIL
}
else if (!root.openRoot(&volume))
{
SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_n("openRoot failed"));////MSG_SD_OPENROOT_FAIL c=0 r=0
SERIAL_ERRORLNRPGM(_n("openRoot failed"));////MSG_SD_OPENROOT_FAIL
}
else
{
cardOK = true;
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_n("SD card ok"));////MSG_SD_CARD_OK c=0 r=0
SERIAL_ECHOLNRPGM(_n("SD card ok"));////MSG_SD_CARD_OK
}
workDir=root;
curDir=&root;
@ -418,13 +418,13 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
if (file.open(curDir, fname, O_READ))
{
filesize = file.fileSize();
SERIAL_PROTOCOLRPGM(_N("File opened: "));////MSG_SD_FILE_OPENED c=0 r=0
SERIAL_PROTOCOLRPGM(_N("File opened: "));////MSG_SD_FILE_OPENED
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLRPGM(_n(" Size: "));////MSG_SD_SIZE c=0 r=0
SERIAL_PROTOCOLRPGM(_n(" Size: "));////MSG_SD_SIZE
SERIAL_PROTOCOLLN(filesize);
sdpos = 0;
SERIAL_PROTOCOLLNRPGM(_N("File selected"));////MSG_SD_FILE_SELECTED c=0 r=0
SERIAL_PROTOCOLLNRPGM(_N("File selected"));////MSG_SD_FILE_SELECTED
getfilename(0, fname);
lcd_setstatus(longFilename[0] ? longFilename : fname);
lcd_setstatus("SD-PRINTING ");
@ -447,7 +447,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
else
{
saving = true;
SERIAL_PROTOCOLRPGM(_N("Writing to file: "));////MSG_SD_WRITE_TO_FILE c=0 r=0
SERIAL_PROTOCOLRPGM(_N("Writing to file: "));////MSG_SD_WRITE_TO_FILE
SERIAL_PROTOCOLLN(name);
lcd_setstatus(fname);
}
@ -493,7 +493,7 @@ void CardReader::getStatus()
if(sdprinting){
SERIAL_PROTOCOL(longFilename);
SERIAL_PROTOCOLPGM("\n");
SERIAL_PROTOCOLRPGM(_N("SD printing byte "));////MSG_SD_PRINTING_BYTE c=0 r=0
SERIAL_PROTOCOLRPGM(_N("SD printing byte "));////MSG_SD_PRINTING_BYTE
SERIAL_PROTOCOL(sdpos);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOLLN(filesize);
@ -659,7 +659,7 @@ void CardReader::chdir(const char * relpath)
if(!newfile.open(*parent,relpath, O_READ))
{
SERIAL_ECHO_START;
SERIAL_ECHORPGM(_n("Cannot enter subdir: "));////MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
SERIAL_ECHORPGM(_n("Cannot enter subdir: "));////MSG_SD_CANT_ENTER_SUBDIR
SERIAL_ECHOLN(relpath);
}
else

10
Firmware/cmdqueue.cpp
View File

@ -429,7 +429,7 @@ void get_command()
// M110 - set current line number.
// Line numbers not sent in succession.
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("Line Number is not Last Line Number+1, Last Line: "));////MSG_ERR_LINE_NO c=0 r=0
SERIAL_ERRORRPGM(_n("Line Number is not Last Line Number+1, Last Line: "));////MSG_ERR_LINE_NO
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
@ -445,7 +445,7 @@ void get_command()
checksum = checksum^(*p++);
if (int(strtol(strchr_pointer+1, NULL, 10)) != int(checksum)) {
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
SERIAL_ERRORRPGM(_n("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
@ -457,7 +457,7 @@ void get_command()
else
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM c=0 r=0
SERIAL_ERRORRPGM(_n("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
@ -474,7 +474,7 @@ void get_command()
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("No Line Number with checksum, Last Line: "));////MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0
SERIAL_ERRORRPGM(_n("No Line Number with checksum, Last Line: "));////MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
@ -579,7 +579,7 @@ void get_command()
serial_count >= (MAX_CMD_SIZE - 1) || n==-1)
{
if(card.eof()){
SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED c=0 r=0
SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED
stoptime=_millis();
char time[30];
unsigned long t=(stoptime-starttime-pause_time)/1000;

6
Firmware/mesh_bed_calibration.cpp
View File

@ -2239,7 +2239,7 @@ BedSkewOffsetDetectionResultType find_bed_offset_and_skew(int8_t verbosity_level
lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));
if (iteration > 0) {
lcd_puts_at_P(0, next_line + 1, _i("Iteration "));////MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
lcd_puts_at_P(0, next_line + 1, _i("Iteration "));////MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20
lcd_print(int(iteration + 1));
}
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2500,7 +2500,7 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
uint8_t next_line;
lcd_display_message_fullscreen_P(_i("Improving bed calibration point"), next_line);////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
lcd_display_message_fullscreen_P(_i("Improving bed calibration point"), next_line);////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60
if (next_line > 3)
next_line = 3;
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
@ -2514,7 +2514,7 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
lcd_set_cursor(0, next_line);
lcd_print(mesh_point+1);
lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */
// Move up.

162
Firmware/messages.c
View File

@ -8,119 +8,119 @@
#include "Configuration_prusa.h"
//internationalized messages
const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////c=0 r=0
const char MSG_AUTO_MODE_ON[] PROGMEM_I1 = ISTR("Mode [auto power]"); ////c=0 r=0
const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); ////c=0 r=0
const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////
const char MSG_AUTO_MODE_ON[] PROGMEM_I1 = ISTR("Mode [auto power]"); ////
const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); ////
const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////c=20 r=12
const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////c=0 r=0
const char MSG_BED_DONE[] PROGMEM_I1 = ISTR("Bed done"); ////c=0 r=0
const char MSG_BED_HEATING[] PROGMEM_I1 = ISTR("Bed Heating"); ////c=0 r=0
const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////
const char MSG_BED_DONE[] PROGMEM_I1 = ISTR("Bed done"); ////
const char MSG_BED_HEATING[] PROGMEM_I1 = ISTR("Bed Heating"); ////
const char MSG_BED_LEVELING_FAILED_POINT_LOW[] PROGMEM_I1 = ISTR("Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."); ////c=20 r=4
const char MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED[] PROGMEM_I1 = ISTR("XYZ calibration failed. Please consult the manual."); ////c=20 r=8
const char MSG_CALIBRATE_Z_AUTO[] PROGMEM_I1 = ISTR("Calibrating Z"); ////c=20 r=2
const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////c=0 r=0
const char MSG_CARD_MENU[] PROGMEM_I1 = ISTR("Print from SD"); ////
const char MSG_CONFIRM_NOZZLE_CLEAN[] PROGMEM_I1 = ISTR("Please clean the nozzle for calibration. Click when done."); ////c=20 r=8
const char MSG_COOLDOWN[] PROGMEM_I1 = ISTR("Cooldown"); ////c=0 r=0
const char MSG_COOLDOWN[] PROGMEM_I1 = ISTR("Cooldown"); ////
const char MSG_CRASH_DETECTED[] PROGMEM_I1 = ISTR("Crash detected."); ////c=20 r=1
const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det. [N/A]"); ////c=0 r=0
const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det. [off]"); ////c=0 r=0
const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det. [on]"); ////c=0 r=0
const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0
const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det. [N/A]"); ////
const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det. [off]"); ////
const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det. [on]"); ////
const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////
const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1
const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////c=14 r=0
const char MSG_FAN_SPEED[] PROGMEM_I1 = ISTR("Fan speed"); ////c=14
const char MSG_FILAMENT_CLEAN[] PROGMEM_I1 = ISTR("Filament extruding & with correct color?"); ////c=20 r=2
const char MSG_FILAMENT_LOADING_T0[] PROGMEM_I1 = ISTR("Insert filament into extruder 1. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T1[] PROGMEM_I1 = ISTR("Insert filament into extruder 2. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T2[] PROGMEM_I1 = ISTR("Insert filament into extruder 3. Click when done."); ////c=20 r=4
const char MSG_FILAMENT_LOADING_T3[] PROGMEM_I1 = ISTR("Insert filament into extruder 4. Click when done."); ////c=20 r=4
const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////c=0 r=0
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[] PROGMEM_I1 = ISTR("Searching bed calibration point"); ////c=60 r=0
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////c=14 r=0
const char MSG_FILAMENTCHANGE[] PROGMEM_I1 = ISTR("Change filament"); ////
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE1[] PROGMEM_I1 = ISTR("Searching bed calibration point"); ////c=60
const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////c=14
const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////c=20 r=1
const char MSG_FOLLOW_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
const char MSG_FOLLOW_Z_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
const char MSG_FSENS_AUTOLOAD_NA[] PROGMEM_I1 = ISTR("F. autoload [N/A]"); ////c=17 r=1
const char MSG_FSENSOR_OFF[] PROGMEM_I1 = ISTR("Fil. sensor [off]"); ////c=0 r=0
const char MSG_FSENSOR_ON[] PROGMEM_I1 = ISTR("Fil. sensor [on]"); ////c=0 r=0
const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////c=0 r=0
const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20 r=0
const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////c=0 r=0
const char MSG_FSENSOR_OFF[] PROGMEM_I1 = ISTR("Fil. sensor [off]"); ////
const char MSG_FSENSOR_ON[] PROGMEM_I1 = ISTR("Fil. sensor [on]"); ////
const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////
const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////
const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20 r=1
const char MSG_CHOOSE_FILAMENT[] PROGMEM_I1 = ISTR("Choose filament:"); ////c=20 r=1
const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////c=17 r=0
const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20 r=0
const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////c=17
const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20
const char MSG_M117_V2_CALIBRATION[] PROGMEM_I1 = ISTR("M117 First layer cal."); ////c=25 r=1
const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////c=0 r=0
const char MSG_BACK[] PROGMEM_I1 = ISTR("Back"); ////c=0 r=0
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[] PROGMEM_I1 = ISTR("Measuring reference height of calibration point"); ////c=60 r=0
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9"); ////c=14 r=0
const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////c=0 r=0
const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=0 r=0
const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0
const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////
const char MSG_BACK[] PROGMEM_I1 = ISTR("Back"); ////
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1[] PROGMEM_I1 = ISTR("Measuring reference height of calibration point"); ////c=60
const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9"); ////c=14
const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////
const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////
const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////
const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0
const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20 r=0
const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20
const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20
const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4
const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20 r=0
const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20
const char MSG_PULL_OUT_FILAMENT[] PROGMEM_I1 = ISTR("Please pull out filament immediately"); ////c=20 r=4
const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover print?"); ////c=20 r=2
const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////c=0 r=0
const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////c=0 r=0
const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////
const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////
const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4
const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20 r=0
const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20 r=0
const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20 r=0
const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////c=20 r=0
const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////c=19 r=0
const char MSG_SELFTEST_FAN_YES[] PROGMEM_I1 = ISTR("Spinning"); ////c=19 r=0
const char MSG_SELFTEST_CHECK_BED[] PROGMEM_I1 = ISTR("Checking bed "); ////c=20 r=0
const char MSG_SELFTEST_CHECK_FSENSOR[] PROGMEM_I1 = ISTR("Checking sensors "); ////c=20 r=0
const char MSG_SELFTEST_MOTOR[] PROGMEM_I1 = ISTR("Motor"); ////c=0 r=0
const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor"); ////c=17 r=0
const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////c=0 r=0
const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////c=0 r=0
const char MSG_SILENT_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [high power]"); ////c=0 r=0
const char MSG_SILENT_MODE_ON[] PROGMEM_I1 = ISTR("Mode [silent]"); ////c=0 r=0
const char MSG_STEALTH_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [Normal]"); ////c=0 r=0
const char MSG_STEALTH_MODE_ON[] PROGMEM_I1 = ISTR("Mode [Stealth]"); ////c=0 r=0
const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20
const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20
const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20
const char MSG_SELFTEST_FAN[] PROGMEM_I1 = ISTR("Fan test"); ////c=20
const char MSG_SELFTEST_FAN_NO[] PROGMEM_I1 = ISTR("Not spinning"); ////c=19
const char MSG_SELFTEST_FAN_YES[] PROGMEM_I1 = ISTR("Spinning"); ////c=19
const char MSG_SELFTEST_CHECK_BED[] PROGMEM_I1 = ISTR("Checking bed "); ////c=20
const char MSG_SELFTEST_CHECK_FSENSOR[] PROGMEM_I1 = ISTR("Checking sensors "); ////c=20
const char MSG_SELFTEST_MOTOR[] PROGMEM_I1 = ISTR("Motor"); ////
const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor"); ////c=17
const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////
const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////
const char MSG_SILENT_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [high power]"); ////
const char MSG_SILENT_MODE_ON[] PROGMEM_I1 = ISTR("Mode [silent]"); ////
const char MSG_STEALTH_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [Normal]"); ////
const char MSG_STEALTH_MODE_ON[] PROGMEM_I1 = ISTR("Mode [Stealth]"); ////
const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////c=20 r=2
const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////c=0 r=0
const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////c=0 r=0
const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////
const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////
const char MSG_TEMP_CALIBRATION[] PROGMEM_I1 = ISTR("Temp. cal. "); ////c=20 r=1
const char MSG_TEMP_CALIBRATION_DONE[] PROGMEM_I1 = ISTR("Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."); ////c=20 r=12
const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////c=17 r=0
const char MSG_UNLOAD_FILAMENT[] PROGMEM_I1 = ISTR("Unload filament"); ////c=17
const char MSG_UNLOADING_FILAMENT[] PROGMEM_I1 = ISTR("Unloading filament"); ////c=20 r=1
const char MSG_WATCH[] PROGMEM_I1 = ISTR("Info screen"); ////c=0 r=0
const char MSG_WATCH[] PROGMEM_I1 = ISTR("Info screen"); ////
const char MSG_WIZARD_CALIBRATION_FAILED[] PROGMEM_I1 = ISTR("Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."); ////c=20 r=8
const char MSG_WIZARD_DONE[] PROGMEM_I1 = ISTR("All is done. Happy printing!"); ////c=20 r=8
const char MSG_WIZARD_HEATING[] PROGMEM_I1 = ISTR("Preheating nozzle. Please wait."); ////c=20 r=3
const char MSG_WIZARD_QUIT[] PROGMEM_I1 = ISTR("You can always resume the Wizard from Calibration -> Wizard."); ////c=20 r=8
const char MSG_YES[] PROGMEM_I1 = ISTR("Yes"); ////c=0 r=0
const char WELCOME_MSG[] PROGMEM_I1 = ISTR(CUSTOM_MENDEL_NAME " OK."); ////c=20 r=0
const char MSG_YES[] PROGMEM_I1 = ISTR("Yes"); ////
const char WELCOME_MSG[] PROGMEM_I1 = ISTR(CUSTOM_MENDEL_NAME " OK."); ////c=20
//not internationalized messages
const char MSG_SD_WORKDIR_FAIL[] PROGMEM_N1 = "workDir open failed"; ////c=0 r=0
const char MSG_BROWNOUT_RESET[] PROGMEM_N1 = " Brown out Reset"; ////c=0 r=0
const char MSG_EXTERNAL_RESET[] PROGMEM_N1 = " External Reset"; ////c=0 r=0
const char MSG_FILE_SAVED[] PROGMEM_N1 = "Done saving file."; ////c=0 r=0
const char MSG_OFF[] PROGMEM_N1 = "Off"; ////c=0 r=0
const char MSG_ON[] PROGMEM_N1 = "On "; ////c=0 r=0
const char MSG_POSITION_UNKNOWN[] PROGMEM_N1 = "Home X/Y before Z"; ////c=0 r=0
const char MSG_SOFTWARE_RESET[] PROGMEM_N1 = " Software Reset"; ////c=0 r=0
const char MSG_UNKNOWN_COMMAND[] PROGMEM_N1 = "Unknown command: \""; ////c=0 r=0
const char MSG_WATCHDOG_RESET[] PROGMEM_N1 = " Watchdog Reset"; ////c=0 r=0
const char MSG_Z_MAX[] PROGMEM_N1 = "z_max: "; ////c=0 r=0
const char MSG_Z_MIN[] PROGMEM_N1 = "z_min: "; ////c=0 r=0
const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////c=0 r=0
const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////c=0 r=0
const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////c=0 r=0
const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////c=0 r=0
const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////c=0 r=0
const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////c=0 r=0
const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0
const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////c=0 r=0
const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////c=0 r=0
const char MSG_POWERUP[] PROGMEM_N1 = "PowerUp"; ////c=0 r=0
const char MSG_ERR_STOPPED[] PROGMEM_N1 = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"; ////c=0 r=0
const char MSG_ENDSTOP_HIT[] PROGMEM_N1 = "TRIGGERED"; ////c=0 r=0
const char MSG_SD_WORKDIR_FAIL[] PROGMEM_N1 = "workDir open failed"; ////
const char MSG_BROWNOUT_RESET[] PROGMEM_N1 = " Brown out Reset"; ////
const char MSG_EXTERNAL_RESET[] PROGMEM_N1 = " External Reset"; ////
const char MSG_FILE_SAVED[] PROGMEM_N1 = "Done saving file."; ////
const char MSG_OFF[] PROGMEM_N1 = "Off"; ////
const char MSG_ON[] PROGMEM_N1 = "On "; ////
const char MSG_POSITION_UNKNOWN[] PROGMEM_N1 = "Home X/Y before Z"; ////
const char MSG_SOFTWARE_RESET[] PROGMEM_N1 = " Software Reset"; ////
const char MSG_UNKNOWN_COMMAND[] PROGMEM_N1 = "Unknown command: \""; ////
const char MSG_WATCHDOG_RESET[] PROGMEM_N1 = " Watchdog Reset"; ////
const char MSG_Z_MAX[] PROGMEM_N1 = "z_max: "; ////
const char MSG_Z_MIN[] PROGMEM_N1 = "z_min: "; ////
const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////
const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////
const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////
const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////
const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////
const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////
const char MSG_OK[] PROGMEM_N1 = "ok"; ////
const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////
const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////
const char MSG_POWERUP[] PROGMEM_N1 = "PowerUp"; ////
const char MSG_ERR_STOPPED[] PROGMEM_N1 = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"; ////
const char MSG_ENDSTOP_HIT[] PROGMEM_N1 = "TRIGGERED"; ////

4
Firmware/planner.cpp
View File

@ -764,7 +764,7 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_n(" cold extrusion prevented"));////MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
SERIAL_ECHOLNRPGM(_n(" cold extrusion prevented"));////MSG_ERR_COLD_EXTRUDE_STOP
}
#ifdef PREVENT_LENGTHY_EXTRUDE
@ -776,7 +776,7 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
de_float = 0;
#endif
SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_n(" too long extrusion prevented"));////MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0
SERIAL_ECHOLNRPGM(_n(" too long extrusion prevented"));////MSG_ERR_LONG_EXTRUDE_STOP
}
#endif
}

2
Firmware/stepper.cpp
View File

@ -348,7 +348,7 @@ FORCE_INLINE unsigned short calc_timer(uint16_t step_rate) {
timer = (unsigned short)pgm_read_word_near(table_address);
timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3);
}
if(timer < 100) { timer = 100; MYSERIAL.print(_N("Steprate too high: ")); MYSERIAL.println(step_rate); }//(20kHz this should never happen)////MSG_STEPPER_TOO_HIGH c=0 r=0
if(timer < 100) { timer = 100; MYSERIAL.print(_N("Steprate too high: ")); MYSERIAL.println(step_rate); }//(20kHz this should never happen)////MSG_STEPPER_TOO_HIGH
return timer;
}

188
Firmware/ultralcd.cpp
View File

@ -800,7 +800,7 @@ void lcdui_print_status_line(void)
lcd_set_cursor(0, 3);
lcd_puts_P(PSTR(" "));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE c=0 r=0
lcd_puts_P(_i("Calibration done"));////MSG_HOMEYZ_DONE
custom_message_state--;
}
}
@ -2252,9 +2252,9 @@ static void lcd_support_menu()
MENU_ITEM_BACK_P(PSTR("FW - " FW_version));
}*/
MENU_ITEM_BACK_P(_i("prusa3d.com"));////MSG_PRUSA3D c=0 r=0
MENU_ITEM_BACK_P(_i("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM c=0 r=0
MENU_ITEM_BACK_P(_i("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO c=0 r=0
MENU_ITEM_BACK_P(_i("prusa3d.com"));////MSG_PRUSA3D
MENU_ITEM_BACK_P(_i("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM
MENU_ITEM_BACK_P(_i("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO
MENU_ITEM_BACK_P(STR_SEPARATOR);
MENU_ITEM_BACK_P(PSTR(FILAMENT_SIZE));
MENU_ITEM_BACK_P(PSTR(ELECTRONICS));
@ -2714,11 +2714,11 @@ void lcd_wait_interact() {
#ifdef SNMM
lcd_puts_P(_i("Prepare new filament"));////MSG_PREPARE_FILAMENT c=20 r=1
#else
lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20 r=0
lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20
#endif
if (!fsensor_autoload_enabled) {
lcd_set_cursor(0, 2);
lcd_puts_P(_i("and press the knob"));////MSG_PRESS c=20 r=0
lcd_puts_P(_i("and press the knob"));////MSG_PRESS c=20
}
}
@ -2729,7 +2729,7 @@ void lcd_change_success() {
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Change success!"));////MSG_CHANGE_SUCCESS c=0 r=0
lcd_puts_P(_i("Change success!"));////MSG_CHANGE_SUCCESS
}
@ -2754,7 +2754,7 @@ void lcd_loading_color() {
lcd_set_cursor(0, 0);
lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR c=0 r=0
lcd_puts_P(_i("Loading color"));////MSG_LOADING_COLOR
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_PLEASE_WAIT));
lcd_loading_progress_bar((FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL); //show progress bar during filament loading slow sequence
@ -2806,7 +2806,7 @@ void lcd_alright() {
lcd_set_cursor(0, 0);
lcd_puts_P(_i("Changed correctly?"));////MSG_CORRECTLY c=20 r=0
lcd_puts_P(_i("Changed correctly?"));////MSG_CORRECTLY c=20
lcd_set_cursor(1, 1);
@ -2814,11 +2814,11 @@ void lcd_alright() {
lcd_set_cursor(1, 2);
lcd_puts_P(_i("Filament not loaded"));////MSG_NOT_LOADED c=19 r=0
lcd_puts_P(_i("Filament not loaded"));////MSG_NOT_LOADED c=19
lcd_set_cursor(1, 3);
lcd_puts_P(_i("Color not correct"));////MSG_NOT_COLOR c=0 r=0
lcd_puts_P(_i("Color not correct"));////MSG_NOT_COLOR
lcd_set_cursor(0, 1);
@ -3170,7 +3170,7 @@ static void lcd_menu_xyz_skew()
static void lcd_menu_xyz_offset()
{
lcd_set_cursor(0,0);
lcd_puts_P(_i("[0;0] point offset"));////MSG_MEASURED_OFFSET c=0 r=0
lcd_puts_P(_i("[0;0] point offset"));////MSG_MEASURED_OFFSET
lcd_puts_at_P(0, 1, separator);
lcd_puts_at_P(0, 2, PSTR("X"));
lcd_puts_at_P(0, 3, PSTR("Y"));
@ -3299,7 +3299,7 @@ static void _lcd_babystep(int axis, const char *msg)
static void lcd_babystep_z()
{
_lcd_babystep(Z_AXIS, (_i("Adjusting Z")));////MSG_BABYSTEPPING_Z c=20 r=0
_lcd_babystep(Z_AXIS, (_i("Adjusting Z")));////MSG_BABYSTEPPING_Z c=20
}
@ -3358,7 +3358,7 @@ void lcd_adjust_bed(void)
MENU_ITEM_EDIT_int3_P(_i("Right side[um]"), &_md->right, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_RIGHT c=14 r=1
MENU_ITEM_EDIT_int3_P(_i("Front side[um]"), &_md->front, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_FRONT c=14 r=1
MENU_ITEM_EDIT_int3_P(_i("Rear side [um]"), &_md->rear, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_REAR c=14 r=1
MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_adjust_bed_reset);////MSG_BED_CORRECTION_RESET c=0 r=0
MENU_ITEM_FUNCTION_P(_i("Reset"), lcd_adjust_bed_reset);////MSG_BED_CORRECTION_RESET
MENU_END();
}
@ -3391,7 +3391,7 @@ void lcd_adjust_z() {
lcd_clear();
lcd_set_cursor(0, 0);
lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ c=0 r=0
lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ
lcd_set_cursor(1, 1);
lcd_puts_P(_T(MSG_YES));
@ -4338,7 +4338,7 @@ void lcd_pick_babystep(){
lcd_set_cursor(0, 0);
lcd_puts_P(_i("Pick print"));////MSG_PICK_Z c=0 r=0
lcd_puts_P(_i("Pick print"));////MSG_PICK_Z
lcd_set_cursor(3, 2);
@ -4432,10 +4432,10 @@ void lcd_move_menu_axis()
{
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Extruder"), lcd_move_e);////MSG_MOVE_E c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X
MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y
MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z
MENU_ITEM_SUBMENU_P(_i("Extruder"), lcd_move_e);////MSG_MOVE_E
MENU_END();
}
@ -5166,11 +5166,11 @@ void lcd_settings_linearity_correction_menu(void)
#ifdef TMC2130_LINEARITY_CORRECTION_XYZ
//tmc2130_wave_fac[X_AXIS]
MENU_ITEM_EDIT_int3_P(_i("X-correct"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9 r=0
MENU_ITEM_EDIT_int3_P(_i("Y-correct"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9 r=0
MENU_ITEM_EDIT_int3_P(_i("Z-correct"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9 r=0
MENU_ITEM_EDIT_int3_P(_i("X-correct"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9
MENU_ITEM_EDIT_int3_P(_i("Y-correct"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9
MENU_ITEM_EDIT_int3_P(_i("Z-correct"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9
#endif //TMC2130_LINEARITY_CORRECTION_XYZ
MENU_ITEM_EDIT_int3_P(_i("E-correct"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9 r=0
MENU_ITEM_EDIT_int3_P(_i("E-correct"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=9
MENU_END();
}
#endif // TMC2130
@ -5184,7 +5184,7 @@ do\
if (fsensor_not_responding && (mmu_enabled == false))\
{\
/* Filament sensor not working*/\
MENU_ITEM_FUNCTION_P(_i("Fil. sensor [N/A]"), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA c=0 r=0*/\
MENU_ITEM_FUNCTION_P(_i("Fil. sensor [N/A]"), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
MENU_ITEM_SUBMENU_P(_T(MSG_FSENS_AUTOLOAD_NA), lcd_fsensor_fail);\
}\
else\
@ -5431,11 +5431,11 @@ static void lcd_settings_menu()
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN));
MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE
if (!homing_flag)
MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS
if (!isPrintPaused)
MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS c=0 r=0
MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS
SETTINGS_FILAMENT_SENSOR;
@ -5473,7 +5473,7 @@ static void lcd_settings_menu()
MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);
#if (LANG_MODE != 0)
MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT
#endif //(LANG_MODE != 0)
SETTINGS_SD;
@ -5524,31 +5524,31 @@ static void lcd_calibration_menu()
MENU_ITEM_FUNCTION_P(_i("Wizard"), lcd_wizard);////MSG_WIZARD c=17 r=1
MENU_ITEM_SUBMENU_P(_i("First layer cal."), lcd_v2_calibration);////MSG_V2_CALIBRATION c=17 r=1
MENU_ITEM_GCODE_P(_T(MSG_AUTO_HOME), PSTR("G28 W"));
MENU_ITEM_FUNCTION_P(_i("Selftest "), lcd_selftest_v);////MSG_SELFTEST c=0 r=0
MENU_ITEM_FUNCTION_P(_i("Selftest "), lcd_selftest_v);////MSG_SELFTEST
#ifdef MK1BP
// MK1
// "Calibrate Z"
MENU_ITEM_GCODE_P(_T(MSG_HOMEYZ), PSTR("G28 Z"));
#else //MK1BP
// MK2
MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED c=0 r=0
MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED
// "Calibrate Z" with storing the reference values to EEPROM.
MENU_ITEM_SUBMENU_P(_T(MSG_HOMEYZ), lcd_mesh_calibration_z);
#ifndef SNMM
//MENU_ITEM_FUNCTION_P(_i("Calibrate E"), lcd_calibrate_extruder);////MSG_CALIBRATE_E c=20 r=1
#endif
// "Mesh Bed Leveling"
MENU_ITEM_SUBMENU_P(_i("Mesh Bed Leveling"), lcd_mesh_bedleveling);////MSG_MESH_BED_LEVELING c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Mesh Bed Leveling"), lcd_mesh_bedleveling);////MSG_MESH_BED_LEVELING
#endif //MK1BP
MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU
MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17 r=1
#ifndef TMC2130
MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=17 r=1
#endif
#ifndef MK1BP
MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET c=0 r=0
MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET
#endif //MK1BP
#ifndef SNMM
//MENU_ITEM_FUNCTION_P(MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
@ -5920,11 +5920,11 @@ static void fil_load_menu()
{
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN));
MENU_ITEM_FUNCTION_P(_i("Load all"), load_all);////MSG_LOAD_ALL c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Load filament 1"), extr_adj_0);////MSG_LOAD_FILAMENT_1 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Load filament 2"), extr_adj_1);////MSG_LOAD_FILAMENT_2 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Load filament 3"), extr_adj_2);////MSG_LOAD_FILAMENT_3 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Load filament 4"), extr_adj_3);////MSG_LOAD_FILAMENT_4 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Load all"), load_all);////MSG_LOAD_ALL c=17
MENU_ITEM_FUNCTION_P(_i("Load filament 1"), extr_adj_0);////MSG_LOAD_FILAMENT_1 c=17
MENU_ITEM_FUNCTION_P(_i("Load filament 2"), extr_adj_1);////MSG_LOAD_FILAMENT_2 c=17
MENU_ITEM_FUNCTION_P(_i("Load filament 3"), extr_adj_2);////MSG_LOAD_FILAMENT_3 c=17
MENU_ITEM_FUNCTION_P(_i("Load filament 4"), extr_adj_3);////MSG_LOAD_FILAMENT_4 c=17
if (mmu_enabled)
MENU_ITEM_FUNCTION_P(_i("Load filament 5"), extr_adj_4);
@ -6036,14 +6036,14 @@ static void fil_unload_menu()
{
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN));
MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17
MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17
MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17
MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17
MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17
if (mmu_enabled)
MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17 r=0
MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17
MENU_END();
}
@ -6434,10 +6434,10 @@ static void lcd_main_menu()
if ( moves_planned() || IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL))
{
MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE
} else
{
MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT
}
#ifdef SDSUPPORT
@ -6448,11 +6448,11 @@ static void lcd_main_menu()
if (mesh_bed_leveling_flag == false && homing_flag == false) {
if (card.sdprinting)
{
MENU_ITEM_FUNCTION_P(_i("Pause print"), lcd_pause_print);////MSG_PAUSE_PRINT c=0 r=0
MENU_ITEM_FUNCTION_P(_i("Pause print"), lcd_pause_print);////MSG_PAUSE_PRINT
}
else
{
MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Resume print"), lcd_resume_print);////MSG_RESUME_PRINT
}
MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop);
}
@ -6471,16 +6471,16 @@ static void lcd_main_menu()
}
}
#if SDCARDDETECT < 1
MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD c=0 r=0
MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD
#endif
}
} else
{
bMain=true; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function
MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD c=0 r=0
MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD
#if SDCARDDETECT < 1
MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD c=0 r=0
MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD
#endif
}
#endif
@ -6515,7 +6515,7 @@ static void lcd_main_menu()
#endif
#ifdef FILAMENT_SENSOR
if ((fsensor_autoload_enabled == true) && (fsensor_enabled == true) && (mmu_enabled == false))
MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=17 r=0
MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=17
else
#endif //FILAMENT_SENSOR
{
@ -6532,7 +6532,7 @@ static void lcd_main_menu()
if (!is_usb_printing && (lcd_commands_type != LCD_COMMAND_V2_CAL))
{
MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS
}
#if defined(TMC2130) || defined(FILAMENT_SENSOR)
@ -6541,9 +6541,9 @@ static void lcd_main_menu()
if (mmu_enabled) {
MENU_ITEM_SUBMENU_P(_i("Fail stats MMU"), lcd_menu_fails_stats_mmu);
}
MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT c=0 r=0
MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT
#ifdef LCD_TEST
MENU_ITEM_SUBMENU_P(_i("W25x20CL init"), lcd_test_menu);////MSG_SUPPORT c=0 r=0
MENU_ITEM_SUBMENU_P(_i("W25x20CL init"), lcd_test_menu);////MSG_SUPPORT
#endif //LCD_TEST
MENU_END();
@ -6623,13 +6623,13 @@ static void lcd_tune_menu()
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_MAIN)); //1
MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED c=0 r=0
MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED
MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);//3
MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 10);//4
MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);//5
MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW c=0 r=0
MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW
#ifdef FILAMENTCHANGEENABLE
MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//7
#endif
@ -6724,18 +6724,18 @@ static void lcd_mesh_bed_leveling_settings()
MENU_BEGIN();
MENU_ITEM_BACK_P(_T(MSG_SETTINGS));
if(points_nr == 3) MENU_ITEM_FUNCTION_P(_i("Mesh [3x3]"), mbl_mesh_toggle); ////MSG_MESH_3x3 c=18 r=0
else MENU_ITEM_FUNCTION_P(_i("Mesh [7x7]"), mbl_mesh_toggle); ////MSG_MESH_7x7 c=18 r=0
if(points_nr == 3) MENU_ITEM_FUNCTION_P(_i("Mesh [3x3]"), mbl_mesh_toggle); ////MSG_MESH_3x3 c=18
else MENU_ITEM_FUNCTION_P(_i("Mesh [7x7]"), mbl_mesh_toggle); ////MSG_MESH_7x7 c=18
switch (mbl_z_probe_nr) {
case 1: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [1]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18 r=0
case 5: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [5]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18 r=0
default: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [3]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18 r=0
case 1: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [1]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18
case 5: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [5]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18
default: MENU_ITEM_FUNCTION_P(_i("Z-probe nr. [3]"), mbl_probe_nr_toggle); break; ////MSG_Z_PROBE_NR_1 c=18
}
if (points_nr == 7) {
if (magnet_elimination) MENU_ITEM_FUNCTION_P(_i("Magnets comp. [On]"), mbl_magnets_elimination_toggle); ////MSG_MAGNETS_COMP_ON c=18 r=0
else MENU_ITEM_FUNCTION_P(_i("Magnets comp.[Off]"), mbl_magnets_elimination_toggle); ////MSG_MAGNETS_COMP_OFF c=18 r=0
if (magnet_elimination) MENU_ITEM_FUNCTION_P(_i("Magnets comp. [On]"), mbl_magnets_elimination_toggle); ////MSG_MAGNETS_COMP_ON c=18
else MENU_ITEM_FUNCTION_P(_i("Magnets comp.[Off]"), mbl_magnets_elimination_toggle); ////MSG_MAGNETS_COMP_OFF c=18
}
else menu_item_text_P(_i("Magnets comp.[N/A]")); ////MSG_MAGNETS_COMP_NA c=18 r=0
else menu_item_text_P(_i("Magnets comp.[N/A]")); ////MSG_MAGNETS_COMP_NA c=18
MENU_END();
//SETTINGS_MBL_MODE;
}
@ -6754,10 +6754,10 @@ static void lcd_control_temperature_menu()
MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);
#endif
#if TEMP_SENSOR_1 != 0
MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1 c=0 r=0
MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1
#endif
#if TEMP_SENSOR_2 != 0
MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2 c=0 r=0
MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2
#endif
#if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 3);
@ -6766,9 +6766,9 @@ static void lcd_control_temperature_menu()
#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
//MENU_ITEM_EDIT removed, following code must be redesigned if AUTOTEMP enabled
MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN c=0 r=0
MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX c=0 r=0
MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR c=0 r=0
MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN
MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX
MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR
#endif
MENU_END();
@ -6920,7 +6920,7 @@ bool lcd_selftest()
bool _result = true;
lcd_wait_for_cool_down();
lcd_clear();
lcd_set_cursor(0, 0); lcd_puts_P(_i("Self test start "));////MSG_SELFTEST_START c=20 r=0
lcd_set_cursor(0, 0); lcd_puts_P(_i("Self test start "));////MSG_SELFTEST_START c=20
#ifdef TMC2130
FORCE_HIGH_POWER_START;
#endif // TMC2130
@ -7100,7 +7100,7 @@ bool lcd_selftest()
if (_result)
{
LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK c=0 r=0
LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK
}
else
{
@ -7527,27 +7527,27 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
lcd_clear();
lcd_set_cursor(0, 0);
lcd_puts_P(_i("Selftest error !"));////MSG_SELFTEST_ERROR c=0 r=0
lcd_puts_P(_i("Selftest error !"));////MSG_SELFTEST_ERROR
lcd_set_cursor(0, 1);
lcd_puts_P(_i("Please check :"));////MSG_SELFTEST_PLEASECHECK c=0 r=0
lcd_puts_P(_i("Please check :"));////MSG_SELFTEST_PLEASECHECK
switch (testError)
{
case TestError::heater:
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
lcd_puts_P(_i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Not connected"));////MSG_SELFTEST_NOTCONNECTED c=0 r=0
lcd_puts_P(_i("Not connected"));////MSG_SELFTEST_NOTCONNECTED
break;
case TestError::bed:
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Bed / Heater"));////MSG_SELFTEST_BEDHEATER c=0 r=0
lcd_puts_P(_i("Bed / Heater"));////MSG_SELFTEST_BEDHEATER
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
break;
case TestError::endstops:
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Endstops"));////MSG_SELFTEST_ENDSTOPS c=0 r=0
lcd_puts_P(_i("Endstops"));////MSG_SELFTEST_ENDSTOPS
lcd_set_cursor(0, 3);
lcd_puts_P(_T(MSG_SELFTEST_WIRINGERROR));
lcd_set_cursor(17, 3);
@ -7559,7 +7559,7 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
lcd_set_cursor(18, 2);
lcd_print(_error_1);
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Endstop"));////MSG_SELFTEST_ENDSTOP c=0 r=0
lcd_puts_P(_i("Endstop"));////MSG_SELFTEST_ENDSTOP
lcd_set_cursor(18, 3);
lcd_print(_error_2);
break;
@ -7597,17 +7597,17 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
break;
case TestError::axis:
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH c=0 r=0
lcd_puts_P(_i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Axis"));////MSG_SELFTEST_AXIS c=0 r=0
lcd_puts_P(_i("Axis"));////MSG_SELFTEST_AXIS
lcd_set_cursor(18, 3);
lcd_print(_error_1);
break;
case TestError::swappedFan:
lcd_set_cursor(0, 2);
lcd_puts_P(_i("Front/left fans"));////MSG_SELFTEST_FANS c=0 r=0
lcd_puts_P(_i("Front/left fans"));////MSG_SELFTEST_FANS
lcd_set_cursor(0, 3);
lcd_puts_P(_i("Swapped"));////MSG_SELFTEST_SWAPPED c=0 r=0
lcd_puts_P(_i("Swapped"));////MSG_SELFTEST_SWAPPED
lcd_set_cursor(18, 3);
lcd_print(_error_1);
break;
@ -7621,7 +7621,7 @@ static void lcd_selftest_error(TestError testError, const char *_error_1, const
lcd_set_cursor(0, 2);
lcd_puts_P(_T(MSG_SELFTEST_FILAMENT_SENSOR));
lcd_set_cursor(0, 3);
lcd_puts_P(_i("False triggering"));////c=20 r=0
lcd_puts_P(_i("False triggering"));////c=20
break;
}
@ -7931,16 +7931,16 @@ static int lcd_selftest_screen(testScreen screen, int _progress, int _progress_s
if (screen == testScreen::extruderFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
if (screen == testScreen::printFan) lcd_puts_P(_T(MSG_SELFTEST_FAN));
if (screen == testScreen::fansOk) lcd_puts_P(_T(MSG_SELFTEST_FAN));
if (screen == testScreen::endStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
if (screen == testScreen::axisX) lcd_puts_P(_i("Checking X axis "));////MSG_SELFTEST_CHECK_X c=20 r=0
if (screen == testScreen::axisY) lcd_puts_P(_i("Checking Y axis "));////MSG_SELFTEST_CHECK_Y c=20 r=0
if (screen == testScreen::axisZ) lcd_puts_P(_i("Checking Z axis "));////MSG_SELFTEST_CHECK_Z c=20 r=0
if (screen == testScreen::endStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20
if (screen == testScreen::axisX) lcd_puts_P(_i("Checking X axis "));////MSG_SELFTEST_CHECK_X c=20
if (screen == testScreen::axisY) lcd_puts_P(_i("Checking Y axis "));////MSG_SELFTEST_CHECK_Y c=20
if (screen == testScreen::axisZ) lcd_puts_P(_i("Checking Z axis "));////MSG_SELFTEST_CHECK_Z c=20
if (screen == testScreen::bed) lcd_puts_P(_T(MSG_SELFTEST_CHECK_BED));
if (screen == testScreen::hotend
|| screen == testScreen::hotendOk) lcd_puts_P(_i("Checking hotend "));////MSG_SELFTEST_CHECK_HOTEND c=20 r=0
|| screen == testScreen::hotendOk) lcd_puts_P(_i("Checking hotend "));////MSG_SELFTEST_CHECK_HOTEND c=20
if (screen == testScreen::fsensor) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
if (screen == testScreen::fsensorOk) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR));
if (screen == testScreen::allCorrect) lcd_puts_P(_i("All correct "));////MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
if (screen == testScreen::allCorrect) lcd_puts_P(_i("All correct "));////MSG_SELFTEST_CHECK_ALLCORRECT c=20
if (screen == testScreen::failed) lcd_puts_P(_T(MSG_SELFTEST_FAILED));
if (screen == testScreen::home) lcd_puts_P(_i("Calibrating home"));////c=20 r=1
@ -7949,10 +7949,10 @@ static int lcd_selftest_screen(testScreen screen, int _progress, int _progress_s
if ((screen >= testScreen::extruderFan) && (screen <= testScreen::fansOk))
{
//SERIAL_ECHOLNPGM("Fan test");
lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
lcd_set_cursor(18, 2);
(screen < testScreen::printFan) ? lcd_print(_indicator) : lcd_print("OK");
lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18
lcd_set_cursor(18, 3);
(screen < testScreen::fansOk) ? lcd_print(_indicator) : lcd_print("OK");
}
@ -8303,7 +8303,7 @@ void menu_lcd_lcdupdate_func(void)
if(menu_menu==lcd_sdcard_menu)
menu_back();
card.release();
LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED c=0 r=0
LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED
}
}
#endif//CARDINSERTED

2
Firmware/util.cpp
View File

@ -294,7 +294,7 @@ bool show_upgrade_dialog_if_version_newer(const char *version_string)
lcd_puts_at_P(0, 2, PSTR(""));
for (const char *c = version_string; ! is_whitespace_or_nl_or_eol(*c); ++ c)
lcd_putc(*c);
lcd_puts_at_P(0, 3, _i("Please upgrade."));////MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0
lcd_puts_at_P(0, 3, _i("Please upgrade."));////MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
_tone(BEEPER, 1000);
delay_keep_alive(50);

2
lang/lang-build.sh
View File

@ -81,6 +81,8 @@ generate_binary()
rm -f lang_$1.tmp
rm -f lang_$1.dat
LNG=$1
#check lang dictionary
/usr/bin/env python lang-check.py $1
#create lang_xx.tmp - different processing for 'en' language
if [ "$1" = "en" ]; then
#remove comments and empty lines

75
lang/lang-check.py Normal file
View File

@ -0,0 +1,75 @@
#!/usr/bin/env python3
"""Check lang files."""
from argparse import ArgumentParser
from traceback import print_exc
from sys import stderr
def parse_txt(lang, no_warning):
"""Parse txt file and check strings to display definition."""
if lang == "en":
file_path = "lang_en.txt"
else:
file_path = "lang_en_%s.txt" % lang
lines = 1
with open(file_path) as src:
while True:
comment = src.readline().split(' ')
src.readline() # source
translation = src.readline()[:-1]
cols = None
rows = None
for item in comment[1:]:
key, val = item.split('=')
if key == 'c':
cols = int(val)
elif key == 'r':
rows = int(val)
else:
raise RuntimeError(
"Unknown display definition %s on line %d" %
(' '.join(comment), lines))
if cols is None and rows is None:
if not no_warning:
print("[W]: No display definition on line %d" % lines)
cols = len(translation) # propably fullscreen
if rows is None:
rows = 1
if len(translation) > cols*rows:
stderr.write(
"[E]: Text %s is longer then definiton on line %d\n" %
(translation, lines))
stderr.flush()
if len(src.readline()) != 1: # empty line
break
lines += 4
def main():
"""Main function."""
parser = ArgumentParser(
description=__doc__,
usage="$(prog)s lang")
parser.add_argument(
"lang", nargs='?', default="en", type=str,
help="Check lang file (en|cs|de|es|fr|it)")
parser.add_argument(
"--no-warning", action="store_true",
help="Disable warnings")
args = parser.parse_args()
try:
parse_txt(args.lang, args.no_warning)
return 0
except Exception as exc:
print_exc()
parser.error("%s" % exc)
return 1
if __name__ == "__main__":
exit(main())

250
lang/lang_en.txt
View File

@ -1,10 +1,10 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
#MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
@ -16,10 +16,10 @@
#
">Cancel"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
#MSG_WIZARD_DONE c=20 r=8
@ -28,7 +28,7 @@
#
"Ambient"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
#MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
@ -40,13 +40,13 @@
#
"SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
#MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
@ -55,28 +55,28 @@
#MSG_AUTOLOADING_ENABLED c=20 r=4
"Autoloading filament is active, just press the knob and insert filament..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
#MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
#MSG_MENU_BELT_STATUS c=15 r=1
@ -88,10 +88,10 @@
#
"Calibrating home"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
#MSG_CALIBRATE_PINDA c=17 r=1
@ -106,34 +106,34 @@
#MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
#
"Cancel"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
#
"Copy selected language?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
#MSG_CRASH_DETECTED c=20 r=1
@ -151,7 +151,7 @@
#MSG_DATE c=17 r=1
"Date:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
#MSG_BABYSTEP_Z_NOT_SET c=20 r=12
@ -160,7 +160,7 @@
#MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
#MSG_EJECT_FILAMENT c=17 r=1
@ -190,10 +190,10 @@
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
#MSG_STACK_ERROR c=20 r=4
@ -202,16 +202,16 @@
#MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
#MSG_INFO_EXTRUDER c=15 r=1
"Extruder info"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
#
@ -229,10 +229,10 @@
#
"Fail stats"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
#MSG_FANS_CHECK_ON c=17 r=1
@ -241,13 +241,13 @@
#MSG_FANS_CHECK_OFF c=17 r=1
"Fans check [off]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
#
@ -256,10 +256,10 @@
#MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
#MSG_FILAMENT_USED c=19 r=1
@ -283,67 +283,67 @@
#
"Fix the issue and then press button on MMU unit."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
#MSG_BED_CORRECTION_FRONT c=14 r=1
"Front side[um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
#MSG_WIZARD_WELCOME c=20 r=7
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
#MSG_CHOOSE_EXTRUDER c=20 r=1
@ -364,13 +364,13 @@
#MSG_WIZARD_V2_CAL_2 c=20 r=12
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
#
"Is filament 1 loaded?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
#MSG_WIZARD_FILAMENT_LOADED c=20 r=2
@ -391,7 +391,7 @@
#
"Last print"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
#
@ -403,16 +403,16 @@
#
"Lin. correction"
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
#MSG_LOOSE_PULLEY c=20 r=1
@ -424,13 +424,13 @@
#MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal."
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
#MSG_MMU_OK_RESUMING_POSITION c=20 r=4
@ -454,10 +454,10 @@
#MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
#
@ -466,52 +466,52 @@
#
"MMU power fails"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
#
"MMU2 connected"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
#
"N/A"
#MSG_NO c=0 r=0
#MSG_NO
"No"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
#
"New firmware version available:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
#MSG_WIZARD_V2_CAL c=20 r=8
@ -520,7 +520,7 @@
#MSG_WIZARD_WILL_PREHEAT c=20 r=4
"Now I will preheat nozzle for PLA."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
@ -532,7 +532,7 @@
#
"Nozzle FAN"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
#MSG_PID_RUNNING c=20 r=1
@ -556,7 +556,7 @@
#MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
"Please clean the nozzle for calibration. Click when done."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
#MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
@ -595,16 +595,16 @@
#MSG_UPDATE_MMU2_FW c=20 r=4
"Please update firmware in your MMU2. Waiting for reset."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
#
"Please remove shipping helpers first."
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
#MSG_WIZARD_HEATING c=20 r=3
@ -619,7 +619,7 @@
#
"Power failures"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
#
@ -628,10 +628,10 @@
#
"Preheating to unload"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
#
@ -649,7 +649,7 @@
#
"Print FAN"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
#MSG_BED_CORRECTION_REAR c=14 r=1
@ -664,13 +664,13 @@
#
"Prusa i3 MK3S OK."
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
#MSG_RESUMING_PRINT c=20 r=1
@ -697,25 +697,25 @@
#
"Right"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
#MSG_FORCE_SELFTEST c=20 r=8
@ -730,7 +730,7 @@
#MSG_SET_TEMPERATURE c=19 r=1
"Set temperature:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
#MSG_SHOW_END_STOPS c=17 r=1
@ -775,28 +775,28 @@
#MSG_SOUND_SILENT c=17 r=1
"Sound [silent]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
#MSG_TEMP_CAL_WARNING c=20 r=4
"Stable ambient temperature 21-26C is needed a rigid stand is required."
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
#MSG_TEMP_CALIBRATION c=20 r=1
@ -817,7 +817,7 @@
#MSG_TEMP_CALIBRATION_DONE c=20 r=12
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
#MSG_MENU_TEMPERATURES c=15 r=1
@ -832,7 +832,7 @@
#
"Total print time"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
#
@ -847,7 +847,7 @@
#
"to unload filament"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
#MSG_UNLOADING_FILAMENT c=20 r=1
@ -865,7 +865,7 @@
#
"unknown"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
#MSG_WAITING_TEMP c=20 r=3
@ -889,7 +889,7 @@
#MSG_UNLOAD_SUCCESSFUL c=20 r=2
"Was filament unload successful?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
#MSG_WIZARD c=17 r=1
@ -901,7 +901,7 @@
#MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
"XYZ calibration failed. Please consult the manual."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
#MSG_WIZARD_QUIT c=20 r=8
@ -925,10 +925,10 @@
#MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
"XYZ calibration compromised. Right front calibration point not reachable."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
#
@ -937,13 +937,13 @@
#
"XYZ calibration failed. Front calibration points not reachable."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
#
"XYZ calibration failed. Right front calibration point not reachable."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
#
@ -952,11 +952,11 @@
#
"Y-correct"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"

250
lang/lang_en_cz.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
" z 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
" z 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] odsazeni bodu"
@ -22,11 +22,11 @@
">Cancel"
">Zrusit"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Dostavovani Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Vse OK "
@ -38,7 +38,7 @@
"Ambient"
"Okoli"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"a stisknete tlacitko"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"SpoolJoin [vyp]"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"\x00"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"AutoZavedeni fil."
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Delka osy"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Osa"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Podlozka / Topeni"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Bed OK."
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Zahrivani bed"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Korekce podlozky"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Podlozka"
@ -118,11 +118,11 @@
"Calibrating home"
"Kalibruji vychozi poz."
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Kalibrace XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Kalibrovat Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Kalibrace OK"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"Kalibrace"
@ -154,15 +154,15 @@
"Cancel"
"Zrusit"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"Karta vyjmuta"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Barva neni cista"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Zchladit"
@ -170,15 +170,15 @@
"Copy selected language?"
"Kopirovat vybrany jazyk?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Crash det. [zap]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"\x00"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Crash det. [vyp]"
@ -202,7 +202,7 @@
"Date:"
"Datum:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Vypnout motory"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a podlozkou?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"Korekce E"
@ -254,11 +254,11 @@
"Endstop not hit"
"Kon. spinac nesepnut"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"Koncovy spinac"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"Konc. spinace"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"CHYBA:"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Levy vent.:"
@ -282,7 +282,7 @@
"Extruder info"
"\x00"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"\x00"
@ -306,11 +306,11 @@
"Fail stats"
"Selhani"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Rychlost vent."
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Test ventilatoru"
@ -322,15 +322,15 @@
"Fans check [off]"
"Kontr. vent.[vyp]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Fil. senzor [zap]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Fil. senzor [N/A]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Fil. senzor [vyp]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Filament vytlacen a spravne barvy?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Filament nezaveden"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Senzor filamentu"
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Opravte chybu a pote stisknete tlacitko na jednotce MMU."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Prutok"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Predni tiskovy vent?"
@ -394,23 +394,23 @@
"Front side[um]"
"Vpredu [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Predni/levy vent."
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Topeni/Termistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Zahrivani preruseno bezpecnostnim casovacem."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Zahrivani OK."
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Zahrivani"
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Vymenit filament"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Zmena uspesna!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Vymena ok?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Kontrola podlozky"
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Kontrola endstopu"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Kontrola hotend "
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Kontrola senzoru"
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Kontrola osy X"
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Kontrola osy Y"
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Kontrola osy Z"
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace."
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Informace"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"Je filament 1 zaveden?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Vlozte filament"
@ -522,7 +522,7 @@
"Last print"
"Posledni tisk"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Levy vent na trysce?"
@ -538,19 +538,19 @@
"Lin. correction"
"Korekce lin."
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Doladeni osy Z"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Zavest filament"
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Cisteni barvy"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Zavadeni filamentu"
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Kal. prvni vrstvy"
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Hlavni nabidka"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Merim referencni vysku kalibracniho bodu"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"\x00"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Pokracuji..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"Mod [Normal]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Mod [tichy]"
@ -622,15 +622,15 @@
"MMU power fails"
"MMU vypadky proudu"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Mod [tichy]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Mod [automaticky]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Mod [vys. vykon]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU2 pripojeno"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"\x00"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Posunout osu"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Posunout X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Posunout Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Posunout Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Bez pohybu."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"Zadna SD karta"
@ -670,11 +670,11 @@
"N/A"
"\x00"
#MSG_NO c=0 r=0
#MSG_NO
"No"
"Ne"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"Nezapojeno "
@ -682,7 +682,7 @@
"New firmware version available:"
"Vysla nova verze firmware:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Netoci se"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Nyni predehreji trysku pro PLA."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Tryska"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Trysk. vent."
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Pozastavit tisk"
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Zkontrolujte :"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Prosim aktualizujte firmware ve vasi MMU2 jednotce. Cekam na reset."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Prosim cekejte"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Nejprve prosim sundejte transportni soucastky."
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Predehrejte trysku!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Predehrev"
@ -826,7 +826,7 @@
"Power failures"
"Vypadky proudu"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Tisk prerusen"
@ -838,11 +838,11 @@
"Preheating to unload"
"Predehrivam k vyjmuti"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Tiskovy vent.:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Tisk z SD"
@ -866,7 +866,7 @@
"Print FAN"
"Tiskovy vent."
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"\x00"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"Reset XYZ kalibr."
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"\x00"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Pokracovat"
@ -930,31 +930,31 @@
"Right"
"Vpravo"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Hledam kalibracni bod podlozky"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Vyber jazyka"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"\x00"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Self test start "
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Selftest "
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Chyba Selftestu!"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Selftest selhal "
@ -974,7 +974,7 @@
"Set temperature:"
"Nastavte teplotu:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Nastaveni"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Zvuk [tichy]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Rychlost"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Toci se"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Je vyzadovana stabilni pokojova teplota 21-26C a pevna podlozka."
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Statistika "
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Zastavit tisk"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"ZASTAVENO."
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"Podpora"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Prohozene"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"Teplotni kalibrace dokoncena a je nyni aktivni. Teplotni kalibraci je mozno deaktivovat v menu Nastaveni->Tepl. kal."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"Teplota"
@ -1110,7 +1110,7 @@
"Total print time"
"Celkovy cas tisku"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Ladit"
@ -1130,7 +1130,7 @@
"to unload filament"
"k vyjmuti filamentu"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Vyjmout filament"
@ -1154,7 +1154,7 @@
"unknown"
"neznamy"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Ceka se na uzivatele..."
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"Bylo vysunuti filamentu uspesne?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Chyba zapojeni"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"Kalibrace XYZ selhala. Nahlednete do manualu."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Ano"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"Kalibrace XYZ nepresna. Pravy predni bod moc vpredu."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Zavest vse"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Zavest filament 1"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Zavest filament 2"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Zavest filament 3"
@ -1270,14 +1270,14 @@
"Y-correct"
"Korekce Y"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Zavest filament 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Zavest filament 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"

250
lang/lang_en_de.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
" von 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
" von 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] Punktversatz"
@ -22,11 +22,11 @@
">Cancel"
">Abbruch"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Z wurde eingestellt"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Alles richtig "
@ -38,7 +38,7 @@
"Ambient"
"Raumtemp."
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"und Knopf druecken"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"SpoolJoin [N/V]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"SpoolJoin [aus]"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"Startposition"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"Auto-Laden Filament"
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"Automatisches Laden Filament ist aktiv, Knopf druecken und Filament einlegen..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Achsenlaenge"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Achse"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Bett / Heizung"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Bett OK"
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Bett aufwaermen"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Ausgleich Bett ok"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Z-Kal. fehlgeschlg. Sensor nicht ausgeloest. Schmutzige Duese? Warte auf Reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Bett"
@ -118,11 +118,11 @@
"Calibrating home"
"Kalibriere Start"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Kalibrierung XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Kalibrierung Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Z Kalibrieren: Drehen Sie den Knopf bis der obere Anschlag erreicht wird. Anschliessend den Knopf druecken."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Kalibrierung OK"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"Kalibrierung"
@ -154,15 +154,15 @@
"Cancel"
"Abbruch"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"SD Karte entfernt"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Falsche Farbe"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Abkuehlen"
@ -170,15 +170,15 @@
"Copy selected language?"
"Gewaehlte Sprache kopieren?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Crash Erk. [an]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"Crash Erk. [nv]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Crash Erk. [aus]"
@ -202,7 +202,7 @@
"Date:"
"Datum:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Motoren aus"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Moechten Sie den letzten Schritt wiederholen, um den Abstand zwischen Duese und Druckbett neu einzustellen?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"E-Korrektur"
@ -254,11 +254,11 @@
"Endstop not hit"
"Ende nicht getroffen"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"Endanschlag"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"Endschalter"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"FEHLER: Filament- sensor reagiert nicht, bitte Verbindung pruefen."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"FEHLER:"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Extruder Luefter:"
@ -282,7 +282,7 @@
"Extruder info"
"Extruder Info"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"\x00"
@ -306,11 +306,11 @@
"Fail stats"
"Fehlerstatistik"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Luefter-Tempo"
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Lueftertest"
@ -322,15 +322,15 @@
"Fans check [off]"
"Luefter Chk.[aus]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Fil. Sensor [an]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Fil. Sensor [nv]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Fil. Sensor [aus]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Filament extrudiert + richtige Farbe?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Fil. nicht geladen"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Filamentsensor"
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Beseitigen Sie das Problem und druecken Sie dann den Knopf am MMU."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Durchfluss"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Vorderer Luefter?"
@ -394,23 +394,23 @@
"Front side[um]"
"Vorne [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Vorderer/linke Luefter"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Heizung/Thermistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Heizung durch Sicherheitstimer deaktiviert."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Aufwaermen OK."
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Aufwaermen"
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Hallo, ich bin Ihr Original Prusa i3 Drucker. Moechten Sie, dass ich Sie durch den Einrich- tungsablauf fuehre?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Filament-Wechsel"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Wechsel erfolgr.!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Wechsel ok?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Pruefe Bett "
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Pruefe Endschalter"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Pruefe Duese "
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Pruefe Sensoren "
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Pruefe X Achse "
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Pruefe Y Achse "
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Pruefe Z Achse "
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Ich werde jetzt eine Linie drucken. Waehrend des Druckes koennen Sie die Duese allmaehlich senken, indem Sie den Knopf drehen, bis Sie die optimale Hoehe erreichen. Sehen Sie sich die Bilder in unserem Handbuch im Kapitel Kalibrierung an."
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Infoanzeige"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"Wurde Filament 1 geladen?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Filament einlegen"
@ -522,7 +522,7 @@
"Last print"
"Letzter Druck"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Linker Luefter?"
@ -538,19 +538,19 @@
"Lin. correction"
"Lineare Korrektur"
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Z einstellen"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Filament laden"
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Lade Farbe"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Filament laedt"
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Erste-Schicht Kal."
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Hauptmenue"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Messen der Referenzhoehe des Kalibrierpunktes"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"Mesh Bett Ausgleich"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Weiterdrucken..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"Modus [Normal]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Modus [leise]"
@ -622,15 +622,15 @@
"MMU power fails"
"MMU Netzfehler"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Modus [Stealth]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Modus[Auto Power]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Modus[Hohe Leist]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU2 verbunden"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"\x00"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Achse bewegen"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Bewege X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Bewege Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Bewege Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Keine Bewegung."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"Keine SD Karte"
@ -670,11 +670,11 @@
"N/A"
"N.V."
#MSG_NO c=0 r=0
#MSG_NO
"No"
"Nein"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"Nicht angeschlossen"
@ -682,7 +682,7 @@
"New firmware version available:"
"Neue Firmware- Version verfuegbar:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Dreht sich nicht"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Jetzt werde ich die Duese fuer PLA vorheizen."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Duese"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Duesen Luefter"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Druck pausieren"
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Bitte entfernen Sie ueberstehendes Filament von der Duese. Klicken wenn sauber."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Bitte pruefe:"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Bitte aktualisieren Sie die Firmware in der MMU2. Warte auf Reset."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Bitte warten"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Bitte zuerst Transportsicherungen entfernen."
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Duese vorheizen!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Vorheizen"
@ -826,7 +826,7 @@
"Power failures"
"Netzfehler"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Druck abgebrochen"
@ -838,11 +838,11 @@
"Preheating to unload"
"Heizen zum Entladen"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Druckvent.:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Drucken von SD"
@ -866,7 +866,7 @@
"Print FAN"
"Druckluefter"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"\x00"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"XYZ Kalibr. zuruecksetzen."
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"Ruecksetzen"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Druck fortsetzen"
@ -930,31 +930,31 @@
"Right"
"Rechts"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Suche Bett Kalibrierpunkt"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Waehle Sprache"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"Selbsttest OK"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Selbsttest start "
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Selbsttest "
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Selbsttest Fehler!"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Selbsttest misslung "
@ -974,7 +974,7 @@
"Set temperature:"
"Temp. einstellen:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Einstellungen"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Sound [leise]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Geschwindigkeit"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Dreht sich"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Stabile Umgebungs- temperatur 21-26C und feste Stand- flaeche erforderlich"
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Statistiken "
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Druck abbrechen"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"GESTOPPT. "
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"\x00"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Ausgetauscht"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"Temp.kalibrierung ist fertig + aktiv. Temp.kalibrierung kann ausgeschaltet werden im Menu Einstellungen -> Temp.kal."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"Temperatur"
@ -1110,7 +1110,7 @@
"Total print time"
"Gesamte Druckzeit"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Feineinstellung"
@ -1130,7 +1130,7 @@
"to unload filament"
"zum Filament entladen"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Filament entladen"
@ -1154,7 +1154,7 @@
"unknown"
"unbekannt"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Warte auf Benutzer.."
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"Konnten Sie das Filament entnehmen?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Verdrahtungsfehler"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Ja"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"XYZ-Kalibrierung beeintraechtigt. Rechter vorderer Kalibrierpunkt nicht erreichbar."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Alle laden"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Filament 1 laden"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Filament 2 laden"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist nicht erreichbar."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Filament 3 laden"
@ -1270,14 +1270,14 @@
"Y-correct"
"Y-Korrektur"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Filament 4 laden"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Filament 5 laden"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"

250
lang/lang_en_es.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
" de 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
" de 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] punto offset"
@ -22,11 +22,11 @@
">Cancel"
">Cancelar"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Ajustar Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Todo bien"
@ -38,7 +38,7 @@
"Ambient"
"Ambiente"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"Haz clic"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"\x00"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"Llevar al origen"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"Carga automatica de filamento"
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"La carga automatica de filamento esta activada, pulse el dial e inserte el filamento..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Longitud del eje"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Eje"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Base / Calentador"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Base preparada"
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Calentando Base"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Corr. de la cama"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Base calefactable "
@ -118,11 +118,11 @@
"Calibrating home"
"Calibrando posicion inicial"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Calibrar XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Calibrar Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Calibracion OK"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"Calibracion"
@ -154,15 +154,15 @@
"Cancel"
"Cancelar"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"Tarjeta retirada"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Color no homogeneo"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Enfriar"
@ -170,15 +170,15 @@
"Copy selected language?"
"Copiar idioma seleccionado?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Det. choque [act]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"Dec. choque [N/D]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Det. choque [ina]"
@ -202,7 +202,7 @@
"Date:"
"Fecha:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Apagar motores"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"E-correcion"
@ -254,11 +254,11 @@
"Endstop not hit"
"Endstop no alcanzado"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"\x00"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"\x00"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"ERROR: El sensor de filamento no responde, por favor comprueba la conexion."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"\x00"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Ventilador del extrusor:"
@ -282,7 +282,7 @@
"Extruder info"
"Informacion del extrusor"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"Extruir"
@ -306,11 +306,11 @@
"Fail stats"
"Estadistica de fallos"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Velocidad Vent."
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Test ventiladores"
@ -322,15 +322,15 @@
"Fans check [off]"
"Comprob.vent[ina]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Sensor Fil. [act]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Sensor Fil. [N/D]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Sensor Fil. [ina]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Es nitido el color nuevo?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Fil. no introducido"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Sensor de filamento"
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Corrige el problema y pulsa el boton en la unidad MMU."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Flujo"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Vent. frontal?"
@ -394,23 +394,23 @@
"Front side[um]"
"Frontal [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Ventiladores frontal/izquierdo"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Calentador/Termistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Calentadores desactivados por el temporizador de seguridad."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Calentamiento acabado."
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Calentando..."
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Cambiar filamento"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Cambio correcto"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Cambio correcto?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Control base cal."
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Control endstops"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Control fusor"
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Comprobando los sensores"
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Control sensor X"
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Control sensor Y"
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Control sensor Z"
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el dial, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Monitorizar"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"?Esta cargado el filamento 1?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Introducir filamento"
@ -522,7 +522,7 @@
"Last print"
"Ultima impresion"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Vent. izquierdo?"
@ -538,19 +538,19 @@
"Lin. correction"
"Correccion de Linealidad"
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Micropaso Eje Z"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Introducir filam."
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Cambiando color"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Introduciendo filam."
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Cal. primera cap."
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Menu principal"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Midiendo altura del punto de calibracion"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"Nivelacion Mesh Level"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Resumiendo..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"Modo [Normal]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Modo [silencio]"
@ -622,15 +622,15 @@
"MMU power fails"
"Fallo de energia en MMU"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Modo [Silencio]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Modo[fuerza auto]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Modo [rend.pleno]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU2 conectado"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"\x00"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Mover ejes"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Mover X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Mover Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Mover Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Sin movimiento"
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"No hay tarjeta SD"
@ -670,11 +670,11 @@
"N/A"
"No disponible"
#MSG_NO c=0 r=0
#MSG_NO
"No"
"\x00"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"No hay conexion "
@ -682,7 +682,7 @@
"New firmware version available:"
"Nuevo firmware disponible:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Ventilador no gira"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Voy a precalentar la boquilla para PLA ahora."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Boquilla"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Ventilador de capa"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Pausar impresion"
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Limpia boquilla para calibracion. Click cuando acabes."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Controla :"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Por favor actualice el firmware en tu MMU2. Esperando el reseteo."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Por Favor Espere"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Por favor retira los soportes de envio primero."
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Precalienta extrusor!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Precalentar"
@ -826,7 +826,7 @@
"Power failures"
"Cortes de energia"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Impresion cancelada"
@ -838,11 +838,11 @@
"Preheating to unload"
"Precalentar para descargar"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventilador del fusor:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Menu tarjeta SD"
@ -866,7 +866,7 @@
"Print FAN"
"Ventilador del extrusor"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"prusa3d.es"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"\x00"
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"\x00"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Reanudar impres."
@ -930,31 +930,31 @@
"Right"
"Derecha"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Buscando punto de calibracion base"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Cambiar el idioma"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"\x00"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Iniciar Selftest"
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Selftest"
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Error Selftest !"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Fallo Selftest"
@ -974,7 +974,7 @@
"Set temperature:"
"Establecer temp.:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Configuracion"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Sonido[silencios]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Velocidad"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Ventilador girando"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Estadisticas "
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Detener impresion"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"PARADA"
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"Soporte"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Intercambiado"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"Calibracion temperatura terminada. Haz clic para continuar."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"Temperatura"
@ -1110,7 +1110,7 @@
"Total print time"
"Tiempo total :"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Ajustar"
@ -1130,7 +1130,7 @@
"to unload filament"
"para descargar el filamento"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Soltar filamento"
@ -1154,7 +1154,7 @@
"unknown"
"desconocido"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Esperando ordenes"
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"?Se cargocon exito el filamento?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Error de conexion"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"Calibracion XYZ fallada. Consulta el manual por favor."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Si"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Intr. todos fil."
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Introducir fil. 1"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"Calibracion XYZ fallada. Puntos frontales no alcanzables."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Introducir fil. 2"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Introducir fil. 3"
@ -1270,14 +1270,14 @@
"Y-correct"
"Y-correcion"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Introducir fil. 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Cargar filamento 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"

250
lang/lang_en_fr.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
"de 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
"de 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"Offset point [0;0]"
@ -22,11 +22,11 @@
">Cancel"
">Annuler"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Ajustement de Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Tout est correct"
@ -38,7 +38,7 @@
"Ambient"
"Ambiant"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"et pressez le bouton"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"\x00"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"Mise a 0 des axes"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"AutoCharge du filament"
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"Chargement auto du filament actif, appuyez sur le btn et inserez le fil."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Longueur de l'axe"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Axe"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Lit / Chauffage"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Plateau termine"
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Chauffe du lit"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Corr. niveau plateau"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Echec bed leveling. Capt. non declenche. Debris sur buse ? En attente d'un reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Lit"
@ -118,11 +118,11 @@
"Calibrating home"
"Calib. mise a 0"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Calibrer XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Calibrer Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Calibration de Z. Tournez le bouton pour monter le chariot de l'axe Z jusqu'aux butees. Cliquez une fois fait."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Calibration terminee"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"\x00"
@ -154,15 +154,15 @@
"Cancel"
"Annuler"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"Carte retiree"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Couleur incorrecte"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Refroidissement"
@ -170,15 +170,15 @@
"Copy selected language?"
"Copier la langue selectionne ?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Detect. crash[on]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"Detect. crash [N/A]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Detect. crash[off]"
@ -202,7 +202,7 @@
"Date:"
"Date :"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Desactiver moteurs"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Voulez-vous repeter la derniere etape pour reajuster la distance entre la buse et le plateau chauffant ?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"Correct-E"
@ -254,11 +254,11 @@
"Endstop not hit"
"Butee non atteinte"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"Butee"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"Butees"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"ERREUR : Le capteur de filament ne repond pas, verifiez le branchement."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"ERREUR :"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Ventilo extrudeur:"
@ -282,7 +282,7 @@
"Extruder info"
"Infos extrudeur"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"Extrudeur"
@ -306,11 +306,11 @@
"Fail stats"
"Statist. d'echec"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Vitesse ventil"
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Test ventilateur"
@ -322,15 +322,15 @@
"Fans check [off]"
"Verif venti [off]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Capteur Fil. [on]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Capteur Fil. [N/A]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Capteur Fil.[off]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Filament extrude et avec bonne couleur ?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Filament non charge"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Capteur de filament"
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Corrigez le probleme et appuyez sur le bouton de l'unite MMU."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Flux"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Ventilo impr avant ?"
@ -394,23 +394,23 @@
"Front side[um]"
"Avant [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Ventilos avt/gauche"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Chauffage/Thermistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Chauffe desactivee par le compteur de securite."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Chauffe terminee."
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Chauffe"
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Bonjour, je suis votre imprimante Original Prusa i3. Voulez-vous que je vous guide a travers le processus d'installation ?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Changer filament"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Changement reussi!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Change correctement?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Verification du lit"
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Verifications butees"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Verif. tete impr."
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Verif. des capteurs"
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Verification axe X"
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Verification axe Y"
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Verification axe Z"
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Je vais commencer a imprimer une ligne et vous baisserez au fur et a mesure la buse en tournant le bouton jusqu'a atteindre la hauteur optimale. Regardez les photos dans notre manuel au chapitre Calibration"
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Ecran d'info"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"Le filament 1 est-il charge ?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Inserez le filament"
@ -522,7 +522,7 @@
"Last print"
"Derniere impression"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Ventilo tete gauche?"
@ -538,19 +538,19 @@
"Lin. correction"
"Correction lin."
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Ajuster Z en direct"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Charger filament"
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Chargement couleur"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Chargement filament"
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Cal. 1ere couche"
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Principal"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Mesure de la hauteur de reference du point de calibration"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"\x00"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Reprise ..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"\x00"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Mode [silencieux]"
@ -622,15 +622,15 @@
"MMU power fails"
"Echecs alim. MMU"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Mode [Furtif]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Mode [puiss.auto]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Mode [haute puiss]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU2 connecte"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"Moteur"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Deplacer l'axe"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Deplacer X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Deplacer Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Deplacer Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Pas de mouvement."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"Pas de carte SD"
@ -670,11 +670,11 @@
"N/A"
"\x00"
#MSG_NO c=0 r=0
#MSG_NO
"No"
"Non"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"Non connecte"
@ -682,7 +682,7 @@
"New firmware version available:"
"Nouvelle version de firmware disponible:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Ne tourne pas"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Maintenant je vais prechauffer la buse pour du PLA."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Buse"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Ventilateur buse"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Pause de l'impr."
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Nettoyez la buse pour la calibration. Cliquez une fois fait."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Verifiez :"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Veuillez mettre a jour le firmware de votre MMU2. En attente d'un reset."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Merci de patienter"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Veuillez retirer d'abord les protections d'envoi."
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Prechauffez la buse!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Prechauffage"
@ -826,7 +826,7 @@
"Power failures"
"Coupures de courant"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Impression annulee"
@ -838,11 +838,11 @@
"Preheating to unload"
"Chauffe pr decharger"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventilo impr. :"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Impr depuis la SD"
@ -866,7 +866,7 @@
"Print FAN"
"Ventilo impression"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"\x00"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"Reinit. calibr. XYZ"
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"Reinitialiser"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Reprendre impression"
@ -930,31 +930,31 @@
"Right"
"Droite"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Recherche du point de calibration du lit"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Choisir langue"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"Auto-test OK"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Debut auto-test"
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Auto-test"
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Erreur auto-test !"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Echec de l'auto-test"
@ -974,7 +974,7 @@
"Set temperature:"
"Regler temp. :"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Reglages"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Son [silencieux]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Vitesse"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Tourne"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Une temperature ambiante stable de 21-26C et un support stable sont requis."
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Statistiques"
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Arreter impression"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"ARRETE."
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"\x00"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Echange"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"La calibration en temperature est terminee et activee. La calibration en temperature peut etre desactivee dans le menu Reglages-> Cal. Temp."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"\x00"
@ -1110,7 +1110,7 @@
"Total print time"
"Temps total impr."
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Regler"
@ -1130,7 +1130,7 @@
"to unload filament"
"pour decharger fil."
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Decharger fil."
@ -1154,7 +1154,7 @@
"unknown"
"inconnu"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Attente utilisateur..."
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"Dechargement du filament reussi ?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Erreur de cablage"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"Echec calibration XYZ. Consultez le manuel."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Oui"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"Calibration XYZ compromise. Le point de calibration avant droit n'est pas atteignable."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Tout charger"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Charger fil. 1"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"Echec calibration XYZ. Les points de calibration avant ne sont pas atteignables."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Charger fil. 2"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"Echec calibration XYZ. Le point de calibration avant droit n'est pas atteignable."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Charger fil. 3"
@ -1270,14 +1270,14 @@
"Y-correct"
"Correction-Y"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Charger fil. 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Charger fil. 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"

250
lang/lang_en_it.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
" su 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
"su 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] punto offset"
@ -22,11 +22,11 @@
">Cancel"
">Annulla"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Compensazione Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Nessun errore"
@ -38,7 +38,7 @@
"Ambient"
"Ambiente"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"e cliccare manopola"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"\x00"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"Trova origine"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"Autocaric. filam."
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"Il caricamento automatico e attivo, premete la manopola e inserite il filamento..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Lunghezza dell'asse"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Assi"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Letto/Riscald."
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Piano fatto."
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Riscald. letto"
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Correz. liv.letto"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Livellamento letto fallito.NoRispSensore.Residui su ugello? In attesa di reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Letto"
@ -118,11 +118,11 @@
"Calibrating home"
"Calibrazione Home"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Calibra XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Calibra Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Calibrazione completa"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"Calibrazione"
@ -154,15 +154,15 @@
"Cancel"
"Annulla"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"SD rimossa"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Colore non puro"
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Raffredda"
@ -170,15 +170,15 @@
"Copy selected language?"
"Copiare la lingua selezionata?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Rilevam.imp. [on]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"Rilevam.imp.[N/A]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Rilevam.imp.[off]"
@ -202,7 +202,7 @@
"Date:"
"Data:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Disabilita motori"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Desideri ripetere l'ultimo passaggio per migliorare la distanza fra ugello e piatto?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"Correzione-E"
@ -254,11 +254,11 @@
"Endstop not hit"
"Finecorsa fuori portata"
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"Finecorsa"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"Finecorsa"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"ERRORE: il sensore filam. non risponde,Controllare conness."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"ERRORE:"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Ventola estrusore:"
@ -282,7 +282,7 @@
"Extruder info"
"Info estrusore"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"Estrusore"
@ -306,11 +306,11 @@
"Fail stats"
"Statistiche fallimenti"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Velocita ventola"
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Test ventola"
@ -322,15 +322,15 @@
"Fans check [off]"
"Control.vent[off]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Sensor filam.[On]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Sensor filam[N/A]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Sensor filam[off]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Filamento estruso & con il giusto colore?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Fil. non caricato"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Sensore filam."
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Risolvi il problema e quindi premi il bottone sull'unita MMU. "
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Flusso"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Ventola frontale?"
@ -394,23 +394,23 @@
"Front side[um]"
"Fronte [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Ventola frontale/sinistra"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Riscald./Termist."
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Riscaldamento fermato dal timer di sicurezza."
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Riscald. completo"
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Riscaldamento..."
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Ciao, sono la tua stampante Original Prusa i3. Gradiresti un aiuto nel processo di configurazione?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Cambia filamento"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Cambio riuscito!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Cambiato correttamente?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Verifica piano"
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Verifica finecorsa"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Verifica ugello"
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Controllo sensori"
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Verifica asse X"
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Verifica asse Y"
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Verifica asse Z"
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Adesso iniziero a stampare una linea e tu dovrai abbassare l'ugello poco per volta ruotando la manopola sino a raggiungere una altezza ottimale. Per favore dai uno sguardo all'immagine del nostro manuale, cap.Calibrazione."
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Schermata info"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"Il filamento 1 e caricato?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Inserire filamento"
@ -522,7 +522,7 @@
"Last print"
"Ultima stampa"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Vent SX hotend?"
@ -538,19 +538,19 @@
"Lin. correction"
"Correzione lin."
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Compensazione Z"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Carica filamento"
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Caricando colore"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Caricando filamento"
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Calibrazione primo layer."
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Menu principale"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Misura altezza di rif. del punto di calib."
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"Mesh livel. letto"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Riprendendo... "
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"Modo [normale]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Modo [silenzioso]"
@ -622,15 +622,15 @@
"MMU power fails"
"Mancanza corrente MMU"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Modo [Silenziosa]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Modo [auto]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Mode [forte]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU2 connessa"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"Motore"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Muovi asse"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Muovi X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Muovi Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Muovi Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Nessun movimento."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"Nessuna SD"
@ -670,11 +670,11 @@
"N/A"
"\x00"
#MSG_NO c=0 r=0
#MSG_NO
"No"
"\x00"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"Non connesso"
@ -682,7 +682,7 @@
"New firmware version available:"
"Nuova versione firmware disponibile:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Non gira"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Adesso preriscaldero l'ugello per PLA."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Ugello"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Ventola estrusore"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Metti in pausa"
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Pulire l'ugello per la calibrazione, poi fare click."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Verifica:"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Aggiorna il firmware sul tuo MMU2. In attesa di reset. "
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Attendere"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Per favore rimuovete i materiali da spedizione"
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Prerisc. ugello!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Preriscalda"
@ -826,7 +826,7 @@
"Power failures"
"Mancanza corrente"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Stampa interrotta"
@ -838,11 +838,11 @@
"Preheating to unload"
"Preriscaldamento per scaricare"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Ventola di stampa:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Stampa da SD"
@ -866,7 +866,7 @@
"Print FAN"
"Ventola di stampa"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"\x00"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"\x00"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"Reset calibrazione XYZ."
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"\x00"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Riprendi stampa"
@ -930,31 +930,31 @@
"Right"
"Destra"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Ricerca dei punti di calibrazione del piano"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Seleziona lingua"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"Autotest OK"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Avvia autotest"
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Autotest"
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Errore Autotest !"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Autotest fallito"
@ -974,7 +974,7 @@
"Set temperature:"
"Imposta temperatura:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Impostazioni"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Suono[silenzioso]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Velocita"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Gira"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Sono necessari una temperatura ambiente di 21-26C e una superficie rigida "
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Statistiche"
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Arresta stampa"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"ARRESTATO."
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"Supporto"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Scambiato"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"Calibrazione temperatura completata e attiva. Puo essere disattivata dal menu Impostazioni ->Cal. Temp."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"\x00"
@ -1110,7 +1110,7 @@
"Total print time"
"Tempo di stampa totale"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Regola"
@ -1130,7 +1130,7 @@
"to unload filament"
"per scaricare il filamento"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Scarica filam."
@ -1154,7 +1154,7 @@
"unknown"
"sconosciuto"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Attendendo utente..."
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"Filamento scaricato con successo?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Errore cablaggio"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"Calibrazione XYZ fallita. Si prega di consultare il manuale."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Si"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Caricare tutti"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Caricare fil. 1"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Caricare fil. 2"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Carica fil. 3"
@ -1270,14 +1270,14 @@
"Y-correct"
"Correzione-Y"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Caricare fil. 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Caricare fil. 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"

250
lang/lang_en_pl.txt
View File

@ -1,12 +1,12 @@
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14
" of 4"
" z 4"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14
" of 9"
" z 9"
#MSG_MEASURED_OFFSET c=0 r=0
#MSG_MEASURED_OFFSET
"[0;0] point offset"
"[0;0] przesuniecie punktu"
@ -22,11 +22,11 @@
">Cancel"
">Anuluj"
#MSG_BABYSTEPPING_Z c=20 r=0
#MSG_BABYSTEPPING_Z c=20
"Adjusting Z"
"Dostrajanie Z"
#MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0
#MSG_SELFTEST_CHECK_ALLCORRECT c=20
"All correct "
"Wszystko OK "
@ -38,7 +38,7 @@
"Ambient"
"Otoczenie"
#MSG_PRESS c=20 r=0
#MSG_PRESS c=20
"and press the knob"
"i nacisnij pokretlo"
@ -54,15 +54,15 @@
"SpoolJoin [N/A]"
"SpoolJoin [nd]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1
#MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]"
"SpoolJoin [wyl]"
#MSG_AUTO_HOME c=0 r=0
#MSG_AUTO_HOME
"Auto home"
"Auto zerowanie"
#MSG_AUTOLOAD_FILAMENT c=17 r=0
#MSG_AUTOLOAD_FILAMENT c=17
"AutoLoad filament"
"AutoLadowanie fil."
@ -74,27 +74,27 @@
"Autoloading filament is active, just press the knob and insert filament..."
"Autoladowanie filamentu wlaczone, nacisnij pokretlo i wsun filament..."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0
#MSG_SELFTEST_AXIS_LENGTH
"Axis length"
"Dlugosc osi"
#MSG_SELFTEST_AXIS c=0 r=0
#MSG_SELFTEST_AXIS
"Axis"
"Os"
#MSG_SELFTEST_BEDHEATER c=0 r=0
#MSG_SELFTEST_BEDHEATER
"Bed / Heater"
"Stol / Grzanie"
#MSG_BED_DONE c=0 r=0
#MSG_BED_DONE
"Bed done"
"Stol OK"
#MSG_BED_HEATING c=0 r=0
#MSG_BED_HEATING
"Bed Heating"
"Grzanie stolu.."
#MSG_BED_CORRECTION_MENU c=0 r=0
#MSG_BED_CORRECTION_MENU
"Bed level correct"
"Korekta poziomowania stolu"
@ -102,7 +102,7 @@
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Kalibracja nieudana. Sensor nie aktywowal sie. Zanieczysz. dysza? Czekam na reset."
#MSG_BED c=0 r=0
#MSG_BED
"Bed"
"Stol"
@ -118,11 +118,11 @@
"Calibrating home"
"Zerowanie osi"
#MSG_CALIBRATE_BED c=0 r=0
#MSG_CALIBRATE_BED
"Calibrate XYZ"
"Kalibracja XYZ"
#MSG_HOMEYZ c=0 r=0
#MSG_HOMEYZ
"Calibrate Z"
"Kalibruj Z"
@ -142,11 +142,11 @@
"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
"Kalibracja XYZ. Przekrec pokretlo, aby przesunac os Z do gornych ogranicznikow. Nacisnij, by potwierdzic."
#MSG_HOMEYZ_DONE c=0 r=0
#MSG_HOMEYZ_DONE
"Calibration done"
"Kalibracja OK"
#MSG_MENU_CALIBRATION c=0 r=0
#MSG_MENU_CALIBRATION
"Calibration"
"Kalibracja"
@ -154,15 +154,15 @@
"Cancel"
"Anuluj"
#MSG_SD_REMOVED c=0 r=0
#MSG_SD_REMOVED
"Card removed"
"Karta wyjeta"
#MSG_NOT_COLOR c=0 r=0
#MSG_NOT_COLOR
"Color not correct"
"Kolor zanieczysz."
#MSG_COOLDOWN c=0 r=0
#MSG_COOLDOWN
"Cooldown"
"Chlodzenie"
@ -170,15 +170,15 @@
"Copy selected language?"
"Skopiowac wybrany jezyk?"
#MSG_CRASHDETECT_ON c=0 r=0
#MSG_CRASHDETECT_ON
"Crash det. [on]"
"Wykr.zderzen [wl]"
#MSG_CRASHDETECT_NA c=0 r=0
#MSG_CRASHDETECT_NA
"Crash det. [N/A]"
"Wykr.zderzen[n/d]"
#MSG_CRASHDETECT_OFF c=0 r=0
#MSG_CRASHDETECT_OFF
"Crash det. [off]"
"Wykr.zderzen[wyl]"
@ -202,7 +202,7 @@
"Date:"
"Data:"
#MSG_DISABLE_STEPPERS c=0 r=0
#MSG_DISABLE_STEPPERS
"Disable steppers"
"Wylaczenie silnikow"
@ -214,7 +214,7 @@
"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Chcesz powtorzyc ostatni krok i ponownie ustawic odleglosc miedzy dysza a stolikiem?"
#MSG_EXTRUDER_CORRECTION c=9 r=0
#MSG_EXTRUDER_CORRECTION c=9
"E-correct"
"Korekcja E"
@ -254,11 +254,11 @@
"Endstop not hit"
"Krancowka nie aktyw."
#MSG_SELFTEST_ENDSTOP c=0 r=0
#MSG_SELFTEST_ENDSTOP
"Endstop"
"Krancowka"
#MSG_SELFTEST_ENDSTOPS c=0 r=0
#MSG_SELFTEST_ENDSTOPS
"Endstops"
"Krancowki"
@ -270,11 +270,11 @@
"ERROR: Filament sensor is not responding, please check connection."
"BLAD: Czujnik filamentu nie odpowiada, sprawdz polaczenie."
#MSG_ERROR c=0 r=0
#MSG_ERROR
"ERROR:"
"BLAD:"
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
"Extruder fan:"
"Went. ekstrudera:"
@ -282,7 +282,7 @@
"Extruder info"
"Informacje o ekstruderze"
#MSG_MOVE_E c=0 r=0
#MSG_MOVE_E
"Extruder"
"Ekstruder"
@ -306,11 +306,11 @@
"Fail stats"
"Statystyki bledow"
#MSG_FAN_SPEED c=14 r=0
#MSG_FAN_SPEED c=14
"Fan speed"
"Predkosc went."
#MSG_SELFTEST_FAN c=20 r=0
#MSG_SELFTEST_FAN c=20
"Fan test"
"Test wentylatora"
@ -322,15 +322,15 @@
"Fans check [off]"
"Sprawd.went.[wyl]"
#MSG_FSENSOR_ON c=0 r=0
#MSG_FSENSOR_ON
"Fil. sensor [on]"
"Czuj. filam. [wl]"
#MSG_FSENSOR_NA c=0 r=0
#MSG_FSENSOR_NA
"Fil. sensor [N/A]"
"Czuj. filam.[N/D]"
#MSG_FSENSOR_OFF c=0 r=0
#MSG_FSENSOR_OFF
"Fil. sensor [off]"
"Czuj. filam.[wyl]"
@ -342,11 +342,11 @@
"Filament extruding & with correct color?"
"Filament wychodzi z dyszy a kolor jest czysty?"
#MSG_NOT_LOADED c=19 r=0
#MSG_NOT_LOADED c=19
"Filament not loaded"
"Fil. nie zaladowany"
#MSG_FILAMENT_SENSOR c=20 r=0
#MSG_FILAMENT_SENSOR c=20
"Filament sensor"
"Czujnik filamentu"
@ -378,15 +378,15 @@
"Fix the issue and then press button on MMU unit."
"Rozwiaz problem i wcisnij przycisk na MMU."
#MSG_FLOW c=0 r=0
#MSG_FLOW
"Flow"
"Przeplyw"
#MSG_PRUSA3D_FORUM c=0 r=0
#MSG_PRUSA3D_FORUM
"forum.prusa3d.com"
"\x00"
#MSG_SELFTEST_COOLING_FAN c=20 r=0
#MSG_SELFTEST_COOLING_FAN c=20
"Front print fan?"
"Przedni went. druku?"
@ -394,23 +394,23 @@
"Front side[um]"
"Przod [um]"
#MSG_SELFTEST_FANS c=0 r=0
#MSG_SELFTEST_FANS
"Front/left fans"
"Przedni/lewy wentylator"
#MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0
#MSG_SELFTEST_HEATERTHERMISTOR
"Heater/Thermistor"
"Grzalka/Termistor"
#MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0
#MSG_BED_HEATING_SAFETY_DISABLED
"Heating disabled by safety timer."
"Grzanie wylaczone przez wyl. czasowy"
#MSG_HEATING_COMPLETE c=20 r=0
#MSG_HEATING_COMPLETE c=20
"Heating done."
"Grzanie zakonczone"
#MSG_HEATING c=0 r=0
#MSG_HEATING
"Heating"
"Grzanie..."
@ -418,47 +418,47 @@
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
"Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z ustawieniem?"
#MSG_PRUSA3D_HOWTO c=0 r=0
#MSG_PRUSA3D_HOWTO
"howto.prusa3d.com"
"\x00"
#MSG_FILAMENTCHANGE c=0 r=0
#MSG_FILAMENTCHANGE
"Change filament"
"Wymiana filamentu"
#MSG_CHANGE_SUCCESS c=0 r=0
#MSG_CHANGE_SUCCESS
"Change success!"
"Wymiana ok!"
#MSG_CORRECTLY c=20 r=0
#MSG_CORRECTLY c=20
"Changed correctly?"
"Wymiana ok?"
#MSG_SELFTEST_CHECK_BED c=20 r=0
#MSG_SELFTEST_CHECK_BED c=20
"Checking bed "
"Kontrola stolu"
#MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0
#MSG_SELFTEST_CHECK_ENDSTOPS c=20
"Checking endstops"
"Kontrola krancowek"
#MSG_SELFTEST_CHECK_HOTEND c=20 r=0
#MSG_SELFTEST_CHECK_HOTEND c=20
"Checking hotend "
"Kontrola hotendu"
#MSG_SELFTEST_CHECK_FSENSOR c=20 r=0
#MSG_SELFTEST_CHECK_FSENSOR c=20
"Checking sensors "
"Sprawdzanie czujnikow"
#MSG_SELFTEST_CHECK_X c=20 r=0
#MSG_SELFTEST_CHECK_X c=20
"Checking X axis "
"Kontrola osi X"
#MSG_SELFTEST_CHECK_Y c=20 r=0
#MSG_SELFTEST_CHECK_Y c=20
"Checking Y axis "
"Kontrola osi Y"
#MSG_SELFTEST_CHECK_Z c=20 r=0
#MSG_SELFTEST_CHECK_Z c=20
"Checking Z axis "
"Kontrola osi Z"
@ -486,7 +486,7 @@
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Zaczne drukowac linie. Stopniowo opuszczaj dysze przekrecajac pokretlo, poki nie uzyskasz optymalnej wysokosci. Sprawdz obrazki w naszym Podreczniku w rozdz. Kalibracja"
#MSG_WATCH c=0 r=0
#MSG_WATCH
"Info screen"
"Ekran informacyjny"
@ -494,7 +494,7 @@
"Is filament 1 loaded?"
"Filament 1 zaladowany?"
#MSG_INSERT_FILAMENT c=20 r=0
#MSG_INSERT_FILAMENT c=20
"Insert filament"
"Wprowadz filament"
@ -522,7 +522,7 @@
"Last print"
"Ost. wydruk"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
#MSG_SELFTEST_EXTRUDER_FAN c=20
"Left hotend fan?"
"Lewy went hotendu?"
@ -538,19 +538,19 @@
"Lin. correction"
"Korekcja lin."
#MSG_BABYSTEP_Z c=0 r=0
#MSG_BABYSTEP_Z
"Live adjust Z"
"Ustaw. Live Z"
#MSG_LOAD_FILAMENT c=17 r=0
#MSG_LOAD_FILAMENT c=17
"Load filament"
"Ladowanie fil."
#MSG_LOADING_COLOR c=0 r=0
#MSG_LOADING_COLOR
"Loading color"
"Czyszcz. koloru"
#MSG_LOADING_FILAMENT c=20 r=0
#MSG_LOADING_FILAMENT c=20
"Loading filament"
"Laduje filament"
@ -566,15 +566,15 @@
"M117 First layer cal."
"M117 Kal. 1. warstwy"
#MSG_MAIN c=0 r=0
#MSG_MAIN
"Main"
"Menu glowne"
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0
#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60
"Measuring reference height of calibration point"
"Okreslam wysokosc odniesienia punktu kalibracyjnego"
#MSG_MESH_BED_LEVELING c=0 r=0
#MSG_MESH_BED_LEVELING
"Mesh Bed Leveling"
"Poziomowanie stolu wg siatki"
@ -606,11 +606,11 @@
"MMU OK. Resuming..."
"MMU OK. Wznawianie..."
#MSG_STEALTH_MODE_OFF c=0 r=0
#MSG_STEALTH_MODE_OFF
"Mode [Normal]"
"Tryb [normalny]"
#MSG_SILENT_MODE_ON c=0 r=0
#MSG_SILENT_MODE_ON
"Mode [silent]"
"Tryb [cichy]"
@ -622,15 +622,15 @@
"MMU power fails"
"Zaniki zasil. MMU"
#MSG_STEALTH_MODE_ON c=0 r=0
#MSG_STEALTH_MODE_ON
"Mode [Stealth]"
"Tryb [Stealth]"
#MSG_AUTO_MODE_ON c=0 r=0
#MSG_AUTO_MODE_ON
"Mode [auto power]"
"Tryb [automatycz]"
#MSG_SILENT_MODE_OFF c=0 r=0
#MSG_SILENT_MODE_OFF
"Mode [high power]"
"Tryb[wysoka wyd.]"
@ -638,31 +638,31 @@
"MMU2 connected"
"MMU podlaczone"
#MSG_SELFTEST_MOTOR c=0 r=0
#MSG_SELFTEST_MOTOR
"Motor"
"Silnik"
#MSG_MOVE_AXIS c=0 r=0
#MSG_MOVE_AXIS
"Move axis"
"Ruch osi"
#MSG_MOVE_X c=0 r=0
#MSG_MOVE_X
"Move X"
"Ruch osi X"
#MSG_MOVE_Y c=0 r=0
#MSG_MOVE_Y
"Move Y"
"Ruch osi Y"
#MSG_MOVE_Z c=0 r=0
#MSG_MOVE_Z
"Move Z"
"Ruch osi Z"
#MSG_NO_MOVE c=0 r=0
#MSG_NO_MOVE
"No move."
"Brak ruchu."
#MSG_NO_CARD c=0 r=0
#MSG_NO_CARD
"No SD card"
"Brak karty SD"
@ -670,11 +670,11 @@
"N/A"
"N/D"
#MSG_NO c=0 r=0
#MSG_NO
"No"
"Nie"
#MSG_SELFTEST_NOTCONNECTED c=0 r=0
#MSG_SELFTEST_NOTCONNECTED
"Not connected"
"Nie podlaczono "
@ -682,7 +682,7 @@
"New firmware version available:"
"Dostepna nowa wersja firmware:"
#MSG_SELFTEST_FAN_NO c=19 r=0
#MSG_SELFTEST_FAN_NO c=19
"Not spinning"
"Nie kreci sie"
@ -694,7 +694,7 @@
"Now I will preheat nozzle for PLA."
"Nagrzewam dysze dla PLA."
#MSG_NOZZLE c=0 r=0
#MSG_NOZZLE
"Nozzle"
"Dysza"
@ -710,7 +710,7 @@
"Nozzle FAN"
"Went. hotendu"
#MSG_PAUSE_PRINT c=0 r=0
#MSG_PAUSE_PRINT
"Pause print"
"Wstrzymanie wydruku"
@ -742,7 +742,7 @@
"Please clean the nozzle for calibration. Click when done."
"Dla prawidl. kalibracji nalezy oczyscic dysze. Potw. guzikiem."
#MSG_SELFTEST_PLEASECHECK c=0 r=0
#MSG_SELFTEST_PLEASECHECK
"Please check :"
"Sprawdz :"
@ -794,7 +794,7 @@
"Please update firmware in your MMU2. Waiting for reset."
"Prosze zaktualizowac Firmware MMU2. Czekam na reset."
#MSG_PLEASE_WAIT c=20 r=0
#MSG_PLEASE_WAIT c=20
"Please wait"
"Prosze czekac"
@ -802,11 +802,11 @@
"Please remove shipping helpers first."
"Najpierw usun zabezpieczenia transportowe"
#MSG_PREHEAT_NOZZLE c=20 r=0
#MSG_PREHEAT_NOZZLE c=20
"Preheat the nozzle!"
"Nagrzej dysze!"
#MSG_PREHEAT c=0 r=0
#MSG_PREHEAT
"Preheat"
"Grzanie"
@ -826,7 +826,7 @@
"Power failures"
"Zaniki zasilania"
#MSG_PRINT_ABORTED c=20 r=0
#MSG_PRINT_ABORTED c=20
"Print aborted"
"Druk przerwany"
@ -838,11 +838,11 @@
"Preheating to unload"
"Nagrzew. do rozlad."
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
#MSG_SELFTEST_PRINT_FAN_SPEED c=18
"Print fan:"
"Went. wydruku:"
#MSG_CARD_MENU c=0 r=0
#MSG_CARD_MENU
"Print from SD"
"Druk z karty SD"
@ -866,7 +866,7 @@
"Print FAN"
"Went. wydruku"
#MSG_PRUSA3D c=0 r=0
#MSG_PRUSA3D
"prusa3d.com"
"\x00"
@ -886,15 +886,15 @@
"Prusa i3 MK3S OK."
"Prusa i3 MK3S OK"
#MSG_CALIBRATE_BED_RESET c=0 r=0
#MSG_CALIBRATE_BED_RESET
"Reset XYZ calibr."
"Reset kalibr. XYZ"
#MSG_BED_CORRECTION_RESET c=0 r=0
#MSG_BED_CORRECTION_RESET
"Reset"
"\x00"
#MSG_RESUME_PRINT c=0 r=0
#MSG_RESUME_PRINT
"Resume print"
"Wznowic wydruk"
@ -930,31 +930,31 @@
"Right"
"Prawa"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60
"Searching bed calibration point"
"Szukam punktu kalibracyjnego na stole"
#MSG_LANGUAGE_SELECT c=0 r=0
#MSG_LANGUAGE_SELECT
"Select language"
"Wybor jezyka"
#MSG_SELFTEST_OK c=0 r=0
#MSG_SELFTEST_OK
"Self test OK"
"Selftest OK"
#MSG_SELFTEST_START c=20 r=0
#MSG_SELFTEST_START c=20
"Self test start "
"Rozpoczynanie Selftestu"
#MSG_SELFTEST c=0 r=0
#MSG_SELFTEST
"Selftest "
"Selftest "
#MSG_SELFTEST_ERROR c=0 r=0
#MSG_SELFTEST_ERROR
"Selftest error !"
"Blad selftest !"
#MSG_SELFTEST_FAILED c=20 r=0
#MSG_SELFTEST_FAILED c=20
"Selftest failed "
"Selftest nieudany"
@ -974,7 +974,7 @@
"Set temperature:"
"Ustaw. temperatury:"
#MSG_SETTINGS c=0 r=0
#MSG_SETTINGS
"Settings"
"Ustawienia"
@ -1034,11 +1034,11 @@
"Sound [silent]"
"Dzwiek [Cichy]"
#MSG_SPEED c=0 r=0
#MSG_SPEED
"Speed"
"Predkosc"
#MSG_SELFTEST_FAN_YES c=19 r=0
#MSG_SELFTEST_FAN_YES c=19
"Spinning"
"Kreci sie"
@ -1046,23 +1046,23 @@
"Stable ambient temperature 21-26C is needed a rigid stand is required."
"Potrzebna jest stabilna temperatura otoczenia 21-26C i stabilne podloze."
#MSG_STATISTICS c=0 r=0
#MSG_STATISTICS
"Statistics "
"Statystyki"
#MSG_STOP_PRINT c=0 r=0
#MSG_STOP_PRINT
"Stop print"
"Zatrzymac druk"
#MSG_STOPPED c=0 r=0
#MSG_STOPPED
"STOPPED. "
"ZATRZYMANO."
#MSG_SUPPORT c=0 r=0
#MSG_SUPPORT
"Support"
"Wsparcie"
#MSG_SELFTEST_SWAPPED c=0 r=0
#MSG_SELFTEST_SWAPPED
"Swapped"
"Zamieniono"
@ -1090,7 +1090,7 @@
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"Kalibracja temperaturowa zakonczona i wlaczona. Moze byc wylaczona z menu Ustawienia -> Kalibracja temp."
#MSG_TEMPERATURE c=0 r=0
#MSG_TEMPERATURE
"Temperature"
"Temperatura"
@ -1110,7 +1110,7 @@
"Total print time"
"Calkowity czas druku"
#MSG_TUNE c=0 r=0
#MSG_TUNE
"Tune"
"Strojenie"
@ -1130,7 +1130,7 @@
"to unload filament"
"aby rozlad. filament"
#MSG_UNLOAD_FILAMENT c=17 r=0
#MSG_UNLOAD_FILAMENT c=17
"Unload filament"
"Rozladowanie fil."
@ -1154,7 +1154,7 @@
"unknown"
"nieznane"
#MSG_USERWAIT c=0 r=0
#MSG_USERWAIT
"Wait for user..."
"Czekam na uzytkownika..."
@ -1186,7 +1186,7 @@
"Was filament unload successful?"
"Rozladowanie fil. ok?"
#MSG_SELFTEST_WIRINGERROR c=0 r=0
#MSG_SELFTEST_WIRINGERROR
"Wiring error"
"Blad polaczenia"
@ -1202,7 +1202,7 @@
"XYZ calibration failed. Please consult the manual."
"Kalibracja XYZ nieudana. Sprawdz przyczyny i rozwiazania w instrukcji."
#MSG_YES c=0 r=0
#MSG_YES
"Yes"
"Tak"
@ -1234,11 +1234,11 @@
"XYZ calibration compromised. Right front calibration point not reachable."
"Kalibracja XYZ niedokladna. Prawy przedni punkt nieosiagalny."
#MSG_LOAD_ALL c=17 r=0
#MSG_LOAD_ALL c=17
"Load all"
"Zalad. wszystkie"
#MSG_LOAD_FILAMENT_1 c=17 r=0
#MSG_LOAD_FILAMENT_1 c=17
"Load filament 1"
"Zaladuj fil. 1"
@ -1250,7 +1250,7 @@
"XYZ calibration failed. Front calibration points not reachable."
"Kalibr. XYZ nieudana. Przednie punkty kalibr. nieosiagalne. Nalezy poprawic montaz drukarki."
#MSG_LOAD_FILAMENT_2 c=17 r=0
#MSG_LOAD_FILAMENT_2 c=17
"Load filament 2"
"Zaladuj fil. 2"
@ -1258,7 +1258,7 @@
"XYZ calibration failed. Right front calibration point not reachable."
"Kalibr. XYZ nieudana. Prawy przedni punkt nieosiagalny. Nalezy poprawic montaz drukarki."
#MSG_LOAD_FILAMENT_3 c=17 r=0
#MSG_LOAD_FILAMENT_3 c=17
"Load filament 3"
"Zaladuj fil. 3"
@ -1270,14 +1270,14 @@
"Y-correct"
"Korekcja Y"
#MSG_LOAD_FILAMENT_4 c=17 r=0
#MSG_LOAD_FILAMENT_4 c=17
"Load filament 4"
"Zaladuj fil. 4"
#MSG_LOAD_FILAMENT_5 c=17 r=0
#MSG_LOAD_FILAMENT_5 c=17
"Load filament 5"
"Laduj filament 5"
#MSG_OFF c=0 r=0
#MSG_OFF
" [off]"
"\x00"