diff --git a/Firmware/menu.cpp b/Firmware/menu.cpp
index 6467cb41..e8404354 100755
--- a/Firmware/menu.cpp
+++ b/Firmware/menu.cpp
@@ -168,11 +168,19 @@ int menu_draw_item_printf_P(char type_char, const char* format, ...)
 }
 */
 
-static int menu_draw_item_puts_P(char type_char, const char* str)
+static void menu_draw_item_puts_P(char type_char, const char* str)
 {
     lcd_set_cursor(0, menu_row);
-    int cnt = lcd_printf_P(PSTR("%c%-18.18S%c"), (lcd_encoder == menu_item)?'>':' ', str, type_char);
-	return cnt;
+    lcd_printf_P(PSTR("%c%-18.18S%c"), (lcd_encoder == menu_item)?'>':' ', str, type_char);
+}
+
+static int menu_draw_item_puts_P(char type_char, const char* str, char num)
+{
+    lcd_set_cursor(0, menu_row);
+    lcd_printf_P(PSTR("%c%-.16S "), (lcd_encoder == menu_item)?'>':' ', str);
+    lcd_putc(num);
+    lcd_set_cursor(19, menu_row);
+    lcd_putc(type_char);
 }
 
 /*
@@ -250,6 +258,34 @@ uint8_t menu_item_function_P(const char* str, menu_func_t func)
 	return 0;
 }
 
+//! @brief Menu item function taking single parameter
+//!
+//! Ideal for numbered lists calling functions with number parameter.
+//! @param str Item caption
+//! @param number aditional character to be added after str, e.g. number
+//! @param func pointer to function taking uint8_t with no return value
+//! @param fn_par value to be passed to function
+//! @retval 0
+//! @retval 1 Item was clicked
+uint8_t menu_item_function_P(const char* str, char number, void (*func)(uint8_t), uint8_t fn_par)
+{
+    if (menu_item == menu_line)
+    {
+        if (lcd_draw_update) menu_draw_item_puts_P(' ', str, number);
+        if (menu_clicked && (lcd_encoder == menu_item))
+        {
+            menu_clicked = false;
+            lcd_consume_click();
+            lcd_update_enabled = 0;
+            if (func) func(fn_par);
+            lcd_update_enabled = 1;
+            return menu_item_ret();
+        }
+    }
+    menu_item++;
+    return 0;
+}
+
 uint8_t menu_item_gcode_P(const char* str, const char* str_gcode)
 {
 	if (menu_item == menu_line)
diff --git a/Firmware/menu.h b/Firmware/menu.h
index 667f8675..7ddfe3f2 100755
--- a/Firmware/menu.h
+++ b/Firmware/menu.h
@@ -87,6 +87,9 @@ extern uint8_t menu_item_back_P(const char* str);
 #define MENU_ITEM_FUNCTION_P(str, func) do { if (menu_item_function_P(str, func)) return; } while (0)
 extern uint8_t menu_item_function_P(const char* str, menu_func_t func);
 
+#define MENU_ITEM_FUNCTION_NR_P(str, number, func, fn_par) do { if (menu_item_function_P(str, number, func, fn_par)) return; } while (0)
+extern uint8_t menu_item_function_P(const char* str, char number, void (*func)(uint8_t), uint8_t fn_par);
+
 #define MENU_ITEM_GCODE_P(str, str_gcode) do { if (menu_item_gcode_P(str, str_gcode)) return; } while (0)
 extern uint8_t menu_item_gcode_P(const char* str, const char* str_gcode);
 
diff --git a/Firmware/messages.c b/Firmware/messages.c
index e4a24ce1..d5a10b48 100644
--- a/Firmware/messages.c
+++ b/Firmware/messages.c
@@ -48,8 +48,9 @@ const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
 const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////
 const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20 r=1
 const char MSG_CHOOSE_FILAMENT[] PROGMEM_I1 = ISTR("Choose filament:"); ////c=20 r=1
-const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); ////c=17
+const char MSG_LOAD_FILAMENT[] PROGMEM_I1 = ISTR("Load filament"); //// Number 1 to 5 is added behind text e.g. "Load filament 1" c=16
 const char MSG_LOADING_FILAMENT[] PROGMEM_I1 = ISTR("Loading filament"); ////c=20
+const char MSG_EJECT_FILAMENT[] PROGMEM_I1 = ISTR("Eject filament"); //// Number 1 to 5 is added behind text e.g. "Eject filament 1" c=16
 const char MSG_M117_V2_CALIBRATION[] PROGMEM_I1 = ISTR("M117 First layer cal."); ////c=25 r=1
 const char MSG_MAIN[] PROGMEM_I1 = ISTR("Main"); ////
 const char MSG_BACK[] PROGMEM_I1 = ISTR("Back"); ////
diff --git a/Firmware/messages.h b/Firmware/messages.h
index 752195e9..dd6062be 100644
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@@ -125,6 +125,7 @@ extern const char MSG_ENDSTOP_OPEN[];
 extern const char MSG_POWERUP[];
 extern const char MSG_ERR_STOPPED[];
 extern const char MSG_ENDSTOP_HIT[];
+extern const char MSG_EJECT_FILAMENT[];
 
 #if defined(__cplusplus)
 }
diff --git a/Firmware/mmu.cpp b/Firmware/mmu.cpp
index ef5b021c..79bcb1b4 100644
--- a/Firmware/mmu.cpp
+++ b/Firmware/mmu.cpp
@@ -1353,7 +1353,7 @@ void mmu_show_warning()
 
 void lcd_mmu_load_to_nozzle(uint8_t filament_nr)
 {
-//-//
+menu_back();
 bFilamentAction=false;                            // NOT in "mmu_load_to_nozzle_menu()"
   if (degHotend0() > EXTRUDE_MINTEMP)
   {
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index a82c347c..8f9e705f 100755
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -5923,35 +5923,28 @@ static void fil_load_menu()
 	MENU_BEGIN();
 	MENU_ITEM_BACK_P(_T(MSG_MAIN));
 	MENU_ITEM_FUNCTION_P(_i("Load all"), load_all);////MSG_LOAD_ALL c=17
-	MENU_ITEM_FUNCTION_P(_i("Load filament 1"), extr_adj_0);////MSG_LOAD_FILAMENT_1 c=17
-	MENU_ITEM_FUNCTION_P(_i("Load filament 2"), extr_adj_1);////MSG_LOAD_FILAMENT_2 c=17
-	MENU_ITEM_FUNCTION_P(_i("Load filament 3"), extr_adj_2);////MSG_LOAD_FILAMENT_3 c=17
-	MENU_ITEM_FUNCTION_P(_i("Load filament 4"), extr_adj_3);////MSG_LOAD_FILAMENT_4 c=17
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0);////MSG_LOAD_FILAMENT_1 c=16
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', extr_adj, 1);////MSG_LOAD_FILAMENT_2 c=17
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', extr_adj, 2);////MSG_LOAD_FILAMENT_3 c=17
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', extr_adj, 3);////MSG_LOAD_FILAMENT_4 c=17
 
 	if (mmu_enabled)
-		MENU_ITEM_FUNCTION_P(_i("Load filament 5"), extr_adj_4);
+	    MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', extr_adj, 3);
 
 	MENU_END();
 }
 
-template <uint8_t filament>
-static void mmu_load_to_nozzle()
-{
-    menu_back();
-    lcd_mmu_load_to_nozzle(filament);
-}
-
 static void mmu_load_to_nozzle_menu()
 {
 if(bFilamentAction)
 {
 	MENU_BEGIN();
 	MENU_ITEM_BACK_P(_T(MSG_MAIN));
-	MENU_ITEM_FUNCTION_P(_i("Load filament 1"), mmu_load_to_nozzle<0>);
-	MENU_ITEM_FUNCTION_P(_i("Load filament 2"), mmu_load_to_nozzle<1>);
-	MENU_ITEM_FUNCTION_P(_i("Load filament 3"), mmu_load_to_nozzle<2>);
-	MENU_ITEM_FUNCTION_P(_i("Load filament 4"), mmu_load_to_nozzle<3>);
-	MENU_ITEM_FUNCTION_P(_i("Load filament 5"), mmu_load_to_nozzle<4>);
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', lcd_mmu_load_to_nozzle, 0);
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', lcd_mmu_load_to_nozzle, 1);
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', lcd_mmu_load_to_nozzle, 2);
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', lcd_mmu_load_to_nozzle, 3);
+	MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', lcd_mmu_load_to_nozzle, 4);
 	MENU_END();
 }
 else {
@@ -5966,8 +5959,7 @@ else {
      }
 }
 
-template <uint8_t filament>
-static void mmu_eject_filament()
+static void mmu_eject_filament(uint8_t filament)
 {
     menu_back();
     mmu_eject_filament(filament, true);
@@ -5979,11 +5971,11 @@ static void mmu_fil_eject_menu()
     {
         MENU_BEGIN();
         MENU_ITEM_BACK_P(_T(MSG_MAIN));
-        MENU_ITEM_FUNCTION_P(_i("Eject filament 1"), mmu_eject_filament<0>);
-        MENU_ITEM_FUNCTION_P(_i("Eject filament 2"), mmu_eject_filament<1>);
-        MENU_ITEM_FUNCTION_P(_i("Eject filament 3"), mmu_eject_filament<2>);
-        MENU_ITEM_FUNCTION_P(_i("Eject filament 4"), mmu_eject_filament<3>);
-        MENU_ITEM_FUNCTION_P(_i("Eject filament 5"), mmu_eject_filament<4>);
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '1', mmu_eject_filament, 0);
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '2', mmu_eject_filament, 1);
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '3', mmu_eject_filament, 2);
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '4', mmu_eject_filament, 3);
+        MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '5', mmu_eject_filament, 4);
         MENU_END();
     }
     else
diff --git a/lang/lang_en.txt b/lang/lang_en.txt
index dedc258d..3de507cb 100644
--- a/lang/lang_en.txt
+++ b/lang/lang_en.txt
@@ -166,21 +166,6 @@
 #MSG_EJECT_FILAMENT c=17 r=1
 "Eject filament"
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-
 #
 "Eject"
 
@@ -928,35 +913,20 @@
 #MSG_LOAD_ALL c=17
 "Load all"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 
 #
 "XYZ calibration failed. Front calibration points not reachable."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-
 #
 "Y distance from min"
 
 #
 "Y-correct"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-
 #MSG_OFF
 " [off]"
diff --git a/lang/lang_en_cz.txt b/lang/lang_en_cz.txt
index 51d16f56..9db15b02 100644
--- a/lang/lang_en_cz.txt
+++ b/lang/lang_en_cz.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Vysunout filament"
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Vysunout filament 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Vysunout filament 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Vysunout filament 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Vysunout filament 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Vysunout filament 5"
-
 #
 "Eject"
 "Vysunout"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Zavest vse"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Zavest filament 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
@@ -1250,18 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Zavest filament 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Zavest filament 3"
-
 #
 "Y distance from min"
 "Y vzdalenost od min"
@@ -1270,14 +1238,6 @@
 "Y-correct"
 "Korekce Y"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Zavest filament 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Zavest filament 5"
-
 #MSG_OFF
 " [off]"
 "\x00"
diff --git a/lang/lang_en_de.txt b/lang/lang_en_de.txt
index 48da055f..66995f4e 100644
--- a/lang/lang_en_de.txt
+++ b/lang/lang_en_de.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Filamentauswurf"
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Filamentauswurf 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Fil.2 auswerfen"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Fil.3 auswerfen"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Fil.4 auswerfen"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Fil.5 auswerfen"
-
 #
 "Eject"
 "Auswurf"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Alle laden"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Filament 1 laden"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
@@ -1250,17 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "XYZ-Kalibrierung fehlgeschlagen. Vordere Kalibrierpunkte nicht erreichbar."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Filament 2 laden"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "XYZ-Kalibrierung fehlgeschlagen. Rechter vorderer Kalibrierpunkt ist nicht erreichbar."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Filament 3 laden"
 
 #
 "Y distance from min"
@@ -1270,14 +1239,6 @@
 "Y-correct"
 "Y-Korrektur"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Filament 4 laden"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Filament 5 laden"
-
 #MSG_OFF
 " [off]"
 "\x00"
diff --git a/lang/lang_en_es.txt b/lang/lang_en_es.txt
index 3d8b17dc..05757313 100644
--- a/lang/lang_en_es.txt
+++ b/lang/lang_en_es.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Expulsar filamento"
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Expulsar filamento 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Expulsar filamento 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Expulsar filamento 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Expulsar filamento 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Expulsar filamento 5"
-
 #
 "Eject"
 "Expulsar"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Intr. todos fil."
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Introducir fil. 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."
@@ -1250,18 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "Calibracion XYZ fallada. Puntos frontales no alcanzables."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Introducir fil. 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Introducir fil. 3"
-
 #
 "Y distance from min"
 "Distancia en Y desde el min"
@@ -1270,14 +1238,6 @@
 "Y-correct"
 "Y-correcion"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Introducir fil. 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Cargar filamento 5"
-
 #MSG_OFF
 " [off]"
 "\x00"
diff --git a/lang/lang_en_fr.txt b/lang/lang_en_fr.txt
index 7e91c029..9dd3d489 100644
--- a/lang/lang_en_fr.txt
+++ b/lang/lang_en_fr.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Ejecter le fil."
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Ejecter fil. 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Ejecter fil. 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Ejecter fil. 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Ejecter fil. 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Ejecter fil. 5"
-
 #
 "Eject"
 "Ejecter"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Tout charger"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Charger fil. 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "Echec calibration XYZ. Le point de calibration du plateau n'a pas ete trouve."
@@ -1250,18 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "Echec calibration XYZ. Les points de calibration avant ne sont pas atteignables."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Charger fil. 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "Echec calibration XYZ. Le point de calibration avant droit n'est pas atteignable."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Charger fil. 3"
-
 #
 "Y distance from min"
 "Distance Y du min"
@@ -1270,14 +1238,6 @@
 "Y-correct"
 "Correction-Y"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Charger fil. 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Charger fil. 5"
-
 #MSG_OFF
 " [off]"
 "\x00"
diff --git a/lang/lang_en_it.txt b/lang/lang_en_it.txt
index 12a12fa9..45bddac7 100644
--- a/lang/lang_en_it.txt
+++ b/lang/lang_en_it.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Espelli filamento "
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Espelli filamento 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Espellere filamento 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Espelli filamento 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Espellere filamento 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Espelli filamento 5"
-
 #
 "Eject"
 "Espellere"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Caricare tutti"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Caricare fil. 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."
@@ -1250,18 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Caricare fil. 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Carica fil. 3"
-
 #
 "Y distance from min"
 "Distanza Y dal min"
@@ -1270,14 +1238,6 @@
 "Y-correct"
 "Correzione-Y"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Caricare fil. 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Caricare fil. 5"
-
 #MSG_OFF
 " [off]"
 "\x00"
diff --git a/lang/lang_en_pl.txt b/lang/lang_en_pl.txt
index bdac8819..d0937dd8 100644
--- a/lang/lang_en_pl.txt
+++ b/lang/lang_en_pl.txt
@@ -222,26 +222,6 @@
 "Eject filament"
 "Wysun filament"
 
-#MSG_EJECT_FILAMENT1 c=17 r=1
-"Eject filament 1"
-"Wysun filament 1"
-
-#MSG_EJECT_FILAMENT2 c=17 r=1
-"Eject filament 2"
-"Wysun filament 2"
-
-#MSG_EJECT_FILAMENT3 c=17 r=1
-"Eject filament 3"
-"Wysun filament 3"
-
-#MSG_EJECT_FILAMENT4 c=17 r=1
-"Eject filament 4"
-"Wysun filament 4"
-
-#MSG_EJECT_FILAMENT5 c=17 r=1
-"Eject filament 5"
-"Wysun filament 5"
-
 #
 "Eject"
 "Wysun"
@@ -1238,10 +1218,6 @@
 "Load all"
 "Zalad. wszystkie"
 
-#MSG_LOAD_FILAMENT_1 c=17
-"Load filament 1"
-"Zaladuj fil. 1"
-
 #
 "XYZ calibration failed. Bed calibration point was not found."
 "Kalibracja XYZ nieudana. Nie znaleziono punktow kalibracyjnych."
@@ -1250,18 +1226,10 @@
 "XYZ calibration failed. Front calibration points not reachable."
 "Kalibr. XYZ nieudana. Przednie punkty kalibr. nieosiagalne. Nalezy poprawic montaz drukarki."
 
-#MSG_LOAD_FILAMENT_2 c=17
-"Load filament 2"
-"Zaladuj fil. 2"
-
 #
 "XYZ calibration failed. Right front calibration point not reachable."
 "Kalibr. XYZ nieudana. Prawy przedni punkt nieosiagalny. Nalezy poprawic montaz drukarki."
 
-#MSG_LOAD_FILAMENT_3 c=17
-"Load filament 3"
-"Zaladuj fil. 3"
-
 #
 "Y distance from min"
 "Dystans od 0 w osi Y"
@@ -1270,14 +1238,6 @@
 "Y-correct"
 "Korekcja Y"
 
-#MSG_LOAD_FILAMENT_4 c=17
-"Load filament 4"
-"Zaladuj fil. 4"
-
-#MSG_LOAD_FILAMENT_5 c=17
-"Load filament 5"
-"Laduj filament 5"
-
 #MSG_OFF
 " [off]"
 "\x00"