3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

updated messages + slight refactoring to save some bytes

Browse Source
This commit is contained in:
D.R.racer 2020-03-26 15:07:48 +01:00
parent 34ac2917ae
commit 818efb4fa2
3 changed files with 53 additions and 53 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Firmware/Marlin_main.cpp
View File

@ -9480,7 +9480,7 @@ static uint8_t nFSCheckCount=0;
nFSCheckCount=0; // not necessary
oFsensorPCB=ClFsensorPCB::_Rev03b;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
printf_P(PSTR("Filament sensor board change detected: revision 03b or newer\n"));
printf_IRSensorAnalogBoardChange(true);
lcd_setstatuspgm(_i("FS rev. 03b or newer"));
}
}

103
Firmware/ultralcd.cpp
View File

@ -2160,10 +2160,8 @@ static void lcd_support_menu()
MENU_ITEM_BACK_P(PSTR(" 03b or newer"));
break;
case ClFsensorPCB::_Undef:
MENU_ITEM_BACK_P(PSTR(" N/A"));
break;
default:
MENU_ITEM_BACK_P(PSTR(" unknown"));
MENU_ITEM_BACK_P(PSTR(" state unknown"));
}
#endif // IR_SENSOR_ANALOG
@ -5718,7 +5716,7 @@ void lcd_hw_setup_menu(void) // can not be "static"
#ifdef IR_SENSOR_ANALOG
FSENSOR_ACTION_NA;
MENU_ITEM_FUNCTION_P(PSTR("FS Detect"), lcd_detect_IRsensor);
MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor);
#endif //IR_SENSOR_ANALOG
MENU_END();
}
@ -7518,58 +7516,59 @@ void lcd_belttest()
#endif //TMC2130
#ifdef IR_SENSOR_ANALOG
static bool lcd_selftest_IRsensor(bool bStandalone)
{
bool bAction;
bool bPCBrev03b;
uint16_t volt_IR_int;
float volt_IR;
volt_IR_int=current_voltage_raw_IR;
bPCBrev03b=(volt_IR_int<((int)IRsensor_Hopen_TRESHOLD));
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"),volt_IR);
if(volt_IR_int<((int)IRsensor_Hmin_TRESHOLD))
{
if(!bStandalone)
lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
return(false);
}
lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament (but not load them!) into extruder and then press the knob."));
volt_IR_int=current_voltage_raw_IR;
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"),volt_IR);
if(volt_IR_int>((int)IRsensor_Lmax_TRESHOLD))
{
if(!bStandalone)
lcd_selftest_error(TestError::FsensorLevel,"LOW","");
return(false);
}
if((bPCBrev03b?1:0)!=(uint8_t)oFsensorPCB) // safer then "(uint8_t)bPCBrev03b"
{
printf_P(PSTR("Filament sensor board change detected: revision %S\n"),bPCBrev03b?PSTR("03b or newer"):PSTR("03 or older"));
oFsensorPCB=bPCBrev03b?ClFsensorPCB::_Rev03b:ClFsensorPCB::_Old;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
}
return(true);
// called also from marlin_main.cpp
void printf_IRSensorAnalogBoardChange(bool bPCBrev03b){
printf_P(PSTR("Filament sensor board change detected: revision %S\n"), bPCBrev03b ? PSTR("03b or newer") : PSTR("03 or older"));
}
static void lcd_detect_IRsensor()
static bool lcd_selftest_IRsensor(bool bStandalone)
{
bool bAction;
bool bAction;
bool bPCBrev03b;
uint16_t volt_IR_int;
float volt_IR;
bMenuFSDetect=true; // inhibits some code inside "manage_inactivity()"
bAction=lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is the filament unloaded?"),false,true);
if(!bAction)
{
lcd_show_fullscreen_message_and_wait_P(_i("... so unload the filament and repeat action!"));
return;
}
bAction=lcd_selftest_IRsensor(true);
if(bAction)
lcd_show_fullscreen_message_and_wait_P(_i("PCB check successful - withdraw the filament now!"));
else lcd_show_fullscreen_message_and_wait_P(_i("PCB check unsuccessful - withdraw the filament now!"));
bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()"
volt_IR_int=current_voltage_raw_IR;
bPCBrev03b=(volt_IR_int<((int)IRsensor_Hopen_TRESHOLD));
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"),volt_IR);
if(volt_IR_int < ((int)IRsensor_Hmin_TRESHOLD)){
if(!bStandalone)
lcd_selftest_error(TestError::FsensorLevel,"HIGH","");
return(false);
}
lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament (but not load them!) into extruder and then press the knob."));
volt_IR_int=current_voltage_raw_IR;
volt_IR=VOLT_DIV_REF*((float)volt_IR_int/(1023*OVERSAMPLENR));
printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"),volt_IR);
if(volt_IR_int > ((int)IRsensor_Lmax_TRESHOLD)){
if(!bStandalone)
lcd_selftest_error(TestError::FsensorLevel,"LOW","");
return(false);
}
if((bPCBrev03b?1:0)!=(uint8_t)oFsensorPCB){ // safer then "(uint8_t)bPCBrev03b"
printf_IRSensorAnalogBoardChange(bPCBrev03b);
oFsensorPCB=bPCBrev03b?ClFsensorPCB::_Rev03b:ClFsensorPCB::_Old;
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB);
}
return(true);
}
static void lcd_detect_IRsensor(){
bool bAction;
bMenuFSDetect = true; // inhibits some code inside "manage_inactivity()"
bAction = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Is the filament loaded?"), false, false);
if(!bAction){
lcd_show_fullscreen_message_and_wait_P(_i("Please unload the filament first, then repeat this action."));
return;
}
bAction = lcd_selftest_IRsensor(true);
if(bAction)
lcd_show_fullscreen_message_and_wait_P(_i("Sensor verified, remove the filament now."));
else
lcd_show_fullscreen_message_and_wait_P(_i("Verification failed, remove the filament and try again."));
bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()"
}
#endif //IR_SENSOR_ANALOG

1
Firmware/ultralcd.h
View File

@ -142,6 +142,7 @@ extern uint8_t farm_status;
#ifdef IR_SENSOR_ANALOG
extern bool bMenuFSDetect;
void printf_IRSensorAnalogBoardChange(bool bPCBrev03b);
#endif //IR_SENSOR_ANALOG
extern int8_t SilentModeMenu;