hex files for MK2.5 and MK3
Configuration_prusa.h for MK2.5
This commit is contained in:
Robert Pelnar
parent
586c1d2cdb
commit
8216b7777f
@ -6,17 +6,17 @@
|
||||
*------------------------------------*/
|
||||
|
||||
// Printer revision
|
||||
#define FILAMENT_SIZE "1_75mm_MK3"
|
||||
#define FILAMENT_SIZE "1_75mm_MK25"
|
||||
#define NOZZLE_TYPE "E3Dv6full"
|
||||
|
||||
// Developer flag
|
||||
#define DEVELOPER
|
||||
|
||||
// Printer name
|
||||
#define CUSTOM_MENDEL_NAME "Prusa i3 MK3"
|
||||
#define CUSTOM_MENDEL_NAME "Prusa i3 MK2.5"
|
||||
|
||||
// Electronics
|
||||
#define MOTHERBOARD BOARD_EINSY_1_0a
|
||||
#define MOTHERBOARD BOARD_RAMBO_MINI_1_3
|
||||
|
||||
|
||||
// Uncomment the below for the E3D PT100 temperature sensor (with or without PT100 Amplifier)
|
||||
@ -31,9 +31,7 @@
|
||||
*------------------------------------*/
|
||||
|
||||
// Steps per unit {X,Y,Z,E}
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,140}
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,280}
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,560}
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,3200/8,140}
|
||||
|
||||
// Endstop inverting
|
||||
const bool X_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
@ -41,12 +39,12 @@ const bool Y_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic of the endstop.
|
||||
|
||||
// Direction inverting
|
||||
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
|
||||
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
|
||||
#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
#define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
|
||||
|
||||
// Home position
|
||||
#define MANUAL_X_HOME_POS 0
|
||||
@ -82,35 +80,11 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
|
||||
#define MANUAL_FEEDRATE {2700, 2700, 1000, 100} // set the speeds for manual moves (mm/min)
|
||||
|
||||
//Silent mode limits
|
||||
#define SILENT_MAX_ACCEL 960 // max axxeleration in silent mode in mm/s^2
|
||||
#define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define SILENT_MAX_FEEDRATE 172 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//Normal mode limits
|
||||
#define NORMAL_MAX_ACCEL 2500 // Y-axis max axxeleration in normal mode in mm/s^2
|
||||
#define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
|
||||
#define NORMAL_MAX_FEEDRATE 200 //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
|
||||
|
||||
//#define SIMPLE_ACCEL_LIMIT //new limitation method for normal/silent
|
||||
|
||||
//number of bytes from end of the file to start check
|
||||
#define END_FILE_SECTION 10000
|
||||
|
||||
#define Z_AXIS_ALWAYS_ON 1
|
||||
|
||||
// Automatic recovery after crash is detected
|
||||
#define AUTOMATIC_RECOVERY_AFTER_CRASH
|
||||
|
||||
// Disable some commands
|
||||
#define _DISABLE_M42_M226
|
||||
|
||||
// Minimum ambient temperature limit to start triggering MINTEMP errors [C]
|
||||
// this value is litlebit higher that real limit, because ambient termistor is on the board and is temperated from it,
|
||||
// temperature inside the case is around 31C for ambient temperature 25C, when the printer is powered on long time and idle
|
||||
// the real limit is 15C (same as MINTEMP limit), this is because 15C is end of scale for both used thermistors (bed, heater)
|
||||
#define MINTEMP_MINAMBIENT 25
|
||||
#define MINTEMP_MINAMBIENT_RAW 978
|
||||
|
||||
//#define DEBUG_BUILD
|
||||
#ifdef DEBUG_BUILD
|
||||
@ -144,81 +118,6 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
#endif /* DEBUG_BUILD */
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
TMC2130 default settings
|
||||
*------------------------------------*/
|
||||
|
||||
#define TMC2130_FCLK 12000000 // fclk = 12MHz
|
||||
|
||||
#define TMC2130_USTEPS_XY 16 // microstep resolution for XY axes
|
||||
#define TMC2130_USTEPS_Z 16 // microstep resolution for Z axis
|
||||
#define TMC2130_USTEPS_E 32 // microstep resolution for E axis
|
||||
#define TMC2130_INTPOL_XY 1 // extrapolate 256 for XY axes
|
||||
#define TMC2130_INTPOL_Z 1 // extrapolate 256 for Z axis
|
||||
#define TMC2130_INTPOL_E 1 // extrapolate 256 for E axis
|
||||
|
||||
#define TMC2130_PWM_GRAD_X 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_X 230 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_X 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_X 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_Y 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_Y 235 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_Y 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_Y 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_E 2 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_E 235 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_E 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_E 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_Z 4 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_Z 200 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_Z 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_Z 2 // PWMCONF
|
||||
|
||||
#define TMC2130_PWM_GRAD_E 4 // PWMCONF
|
||||
#define TMC2130_PWM_AMPL_E 240 // PWMCONF
|
||||
#define TMC2130_PWM_AUTO_E 1 // PWMCONF
|
||||
#define TMC2130_PWM_FREQ_E 2 // PWMCONF
|
||||
|
||||
#define TMC2130_TOFF_XYZ 3 // CHOPCONF // fchop = 27.778kHz
|
||||
#define TMC2130_TOFF_E 3 // CHOPCONF // fchop = 27.778kHz
|
||||
//#define TMC2130_TOFF_E 4 // CHOPCONF // fchop = 21.429kHz
|
||||
//#define TMC2130_TOFF_E 5 // CHOPCONF // fchop = 17.442kHz
|
||||
|
||||
//#define TMC2130_STEALTH_E // Extruder stealthChop mode
|
||||
//#define TMC2130_CNSTOFF_E // Extruder constant-off-time mode (similar to MK2)
|
||||
|
||||
//#define TMC2130_PWM_DIV 683 // PWM frequency divider (1024, 683, 512, 410)
|
||||
#define TMC2130_PWM_DIV 512 // PWM frequency divider (1024, 683, 512, 410)
|
||||
#define TMC2130_PWM_CLK (2 * TMC2130_FCLK / TMC2130_PWM_DIV) // PWM frequency (23.4kHz, 35.1kHz, 46.9kHz, 58.5kHz for 12MHz fclk)
|
||||
|
||||
#define TMC2130_TPWMTHRS 0 // TPWMTHRS - Sets the switching speed threshold based on TSTEP from stealthChop to spreadCycle mode
|
||||
#define TMC2130_THIGH 0 // THIGH - unused
|
||||
|
||||
//#define TMC2130_TCOOLTHRS_X 450 // TCOOLTHRS - coolstep treshold
|
||||
//#define TMC2130_TCOOLTHRS_Y 450 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_X 430 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_Y 430 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_Z 500 // TCOOLTHRS - coolstep treshold
|
||||
#define TMC2130_TCOOLTHRS_E 500 // TCOOLTHRS - coolstep treshold
|
||||
|
||||
#define TMC2130_SG_HOMING 1 // stallguard homing
|
||||
#define TMC2130_SG_THRS_X 3 // stallguard sensitivity for X axis
|
||||
#define TMC2130_SG_THRS_Y 3 // stallguard sensitivity for Y axis
|
||||
#define TMC2130_SG_THRS_Z 3 // stallguard sensitivity for Z axis
|
||||
#define TMC2130_SG_THRS_E 3 // stallguard sensitivity for E axis
|
||||
|
||||
//new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
|
||||
#define TMC2130_CURRENTS_H {13, 20, 25, 35} // default holding currents for all axes
|
||||
#define TMC2130_CURRENTS_R {13, 20, 25, 35} // default running currents for all axes
|
||||
|
||||
//#define TMC2130_DEBUG
|
||||
//#define TMC2130_DEBUG_WR
|
||||
//#define TMC2130_DEBUG_RD
|
||||
|
||||
|
||||
/*------------------------------------
|
||||
EXTRUDER SETTINGS
|
||||
*------------------------------------*/
|
||||
@ -516,7 +415,6 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#endif
|
||||
#define TEMP_SENSOR_PINDA 1
|
||||
#define TEMP_SENSOR_AMBIENT 2000
|
||||
|
||||
#define STACK_GUARD_TEST_VALUE 0xA2A2
|
||||
|
||||
@ -559,17 +457,6 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
||||
#define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
|
||||
#endif
|
||||
|
||||
// How much shall the print head be lifted on power panic?
|
||||
// Ideally the Z axis will reach a zero phase of the stepper driver on power outage. To simplify this,
|
||||
// UVLO_Z_AXIS_SHIFT shall be an integer multiply of the stepper driver cycle, that is 4x full step.
|
||||
// For example, the Prusa i3 MK2 with 16 microsteps per full step has Z stepping of 400 microsteps per mm.
|
||||
// At 400 microsteps per mm, a full step lifts the Z axis by 0.04mm, and a stepper driver cycle is 0.16mm.
|
||||
// The following example, 12 * (4 * 16 / 400) = 12 * 0.16mm = 1.92mm.
|
||||
//#define UVLO_Z_AXIS_SHIFT 1.92
|
||||
#define UVLO_Z_AXIS_SHIFT 0.64
|
||||
// If power panic occured, and the current temperature is higher then target temperature before interrupt minus this offset, print will be recovered automatically.
|
||||
#define AUTOMATIC_UVLO_BED_TEMP_OFFSET 5
|
||||
|
||||
#define HEATBED_V2
|
||||
|
||||
#define M600_TIMEOUT 600 //seconds
|
||||
|
||||
14030
hex_files/1_75mm_MK25-RAMBo13a-E3Dv6full.hex
Normal file
14030
hex_files/1_75mm_MK25-RAMBo13a-E3Dv6full.hex
Normal file
File diff suppressed because it is too large
Load Diff
14897
hex_files/1_75mm_MK3-EINSy10a-E3Dv6full.hex
Normal file
14897
hex_files/1_75mm_MK3-EINSy10a-E3Dv6full.hex
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user