3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

More G codes documented in RR wiki

Browse source 
M44, M45, M47, M403, M509, M851, M601, M602, M603, M862
This commit is contained in:
3d-gussner 2019-11-26 20:11:55 +01:00
parent 5eaf6f0133
commit 84cb373905
1 changed files with 17 additions and 14 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

31
Firmware/Marlin_main.cpp
View file

@ -5739,7 +5739,7 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
/*!
### M44 - Reset the bed skew and offset calibration<a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M44: Reset the bed skew and offset calibration</a>
### M44 - Reset the bed skew and offset calibration <a href="https://reprap.org/wiki/G-code#M44:_Reset_the_bed_skew_and_offset_calibration">M44: Reset the bed skew and offset calibration</a>
*/ --------------------------------------------------------------------
case 44: // M44: Prusa3D: Reset the bed skew and offset calibration.
@ -5756,9 +5756,9 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
break;
/*!
### M45 - Bed skew and offset with manual Z up<a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M45: Bed skew and offset with manual Z up</a>
### M45 - Bed skew and offset with manual Z up <a href="https://reprap.org/wiki/G-code#M45:_Bed_skew_and_offset_with_manual_Z_up">M45: Bed skew and offset with manual Z up</a>
G80 [ V ]
M45 [ V ]
- `V` - Verbosity level 1, 10 and 20 (low, mid, high). Only when SUPPORT_VERBOSITY is defined.
*/ ------------------------------------------------------
case 45: // M45: Prusa3D: bed skew and offset with manual Z up
@ -5777,8 +5777,11 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
}
break;
/*!
### M46 - Show the assigned IP address <a href="https://reprap.org/wiki/G-code#M46:_Show_the_assigned_IP_address">M46: Show the assigned IP address.</a>
*/ ----------------------------------------------------
/*
case 46:
case 46:
{
// M46: Prusa3D: Show the assigned IP address.
uint8_t ip[4];
@ -5801,7 +5804,7 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
*/
/*!
### M47 - Show end stops dialog on the display<a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">M47: Show end stops dialog on the display</a>
### M47 - Show end stops dialog on the display <a href="https://reprap.org/wiki/G-code#M47:_Show_end_stops_dialog_on_the_display">M47: Show end stops dialog on the display</a>
*/ ----------------------------------------------------
case 47:
@ -5851,7 +5854,7 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
#ifdef Z_PROBE_REPEATABILITY_TEST
/*!
### M48 - Z-Probe repeatability measurement function. <a href="https://reprap.org/wiki/G-code#M48:_Measure_Z-Probe_repeatability">M48: Measure Z-Probe repeatability</a>
### M48 - Z-Probe repeatability measurement function <a href="https://reprap.org/wiki/G-code#M48:_Measure_Z-Probe_repeatability">M48: Measure Z-Probe repeatability</a>
This function assumes the bed has been homed. Specifically, that a G28 command as been issued prior to invoking the M48 Z-Probe repeatability measurement function. Any information generated by a prior G29 Bed leveling command will be lost and need to be regenerated.
@ -7485,7 +7488,7 @@ Sigma_Exit:
break;
/*!
### M403 - Set filament type (material) for particular extruder and notify the MMU <a href="https://reprap.org/wiki/G-code#M403:Set_filament_type_(material)_for_particular extruder_and_notify_the_MMU">M403 - Set filament type (material) for particular extruder and notify the MMU</a>
### M403 - Set filament type (material) for particular extruder and notify the MMU <a href="https://reprap.org/wiki/G-code#M403:_Set_filament_type_.28material.29_for_particular_extruder_and_notify_the_MMU.">M403 - Set filament type (material) for particular extruder and notify the MMU</a>
M403 [ E | F ]
@ -7724,7 +7727,7 @@ Sigma_Exit:
#endif //FILAMENTCHANGEENABLE
/*!
### M601 - Pause print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
### M601 - Pause print <a href="https://reprap.org/wiki/G-code#M601:_Pause_print">M601: Pause print</a>
*/ -------------------------------
case 601:
{
@ -7734,7 +7737,7 @@ Sigma_Exit:
break;
/*!
### M602 - Resume print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
### M602 - Resume print <a href="https://reprap.org/wiki/G-code#M602:_Resume_print">M602: Resume print</a>
*/ -------------------------------
case 602: {
lcd_resume_print();
@ -7742,7 +7745,7 @@ Sigma_Exit:
break;
/*!
### M603 - Stop print <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
### M603 - Stop print <a href="https://reprap.org/wiki/G-code#M603:_Stop_print">M603: Stop print</a>
*/ -------------------------------
case 603: {
lcd_print_stop();
@ -7889,14 +7892,14 @@ Sigma_Exit:
#endif //PINDA_THERMISTOR
/*!
### M862 - Print checking <a href="https://reprap.org/wiki/G-code#G32:_Undock_Z_Probe_sled">G32: Undock Z Probe sled</a>
### M862 - Print checking <a href="https://reprap.org/wiki/G-code#M862:_Print_checking">M862: Print checking</a>
Checks the parameters of the printer and gcode and performs compatibility check
- M862.1 { P<nozzle_diameter> | Q }
- M862.1 { P<nozzle_diameter> | Q } 0.25/0.40/0.60
- M862.2 { P<model_code> | Q }
- M862.3 { P"<model_name>" | Q }
- M862.4 { P<fw_version> | Q }
- M862.5 { P<gcode_level> | Q }
- M862.5 { P<gcode_level> | Q } 0 = none, 1 = warn, 2 = strict
When run with P<> argument, the check is performed against the input value.
When run with Q argument, the current value is shown.
@ -7920,7 +7923,7 @@ Sigma_Exit:
- MK3 (300)
- MK3MMU2 (20300)
- MK3S (302)
- MK3SMMU2S (20302)
- MK3SMMU2S (20302)
*/ ----------------------------------------------
case 862: // M862: print checking