3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Optimize farm_mode init in setup()

Browse source 
This saves 28 bytes of flash memory
This commit is contained in:
Guðni Már Gilbert 2021-07-26 16:31:34 +00:00
parent 400f673fe0
commit 8af9f78822
1 changed files with 3 additions and 8 deletions

11
Firmware/Marlin_main.cpp
View file

@ -1101,8 +1101,10 @@ void setup()
setup_powerhold();
farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
if (farm_mode == 0xFF)
if (farm_mode == 0xFF) {
farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
eeprom_update_byte((uint8_t*)EEPROM_FARM_MODE, farm_mode);
}
if (farm_mode)
{
no_response = true; //we need confirmation by recieving PRUSA thx
@ -1440,13 +1442,6 @@ void setup()
enable_z();
#endif
farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE);
if (farm_mode == 0xFF) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
if (farm_mode)
{
prusa_statistics(8);
}
// Enable Toshiba FlashAir SD card / WiFi enahanced card.
card.ToshibaFlashAir_enable(eeprom_read_byte((unsigned char*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY) == 1);