3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

wait for PINDA gcode changed

Browse Source
This commit is contained in:
PavelSindler 2018-04-11 16:48:47 +02:00
parent f70685a92d
commit 919fba531a
1 changed files with 44 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

87
Firmware/Marlin_main.cpp
View File

@ -232,7 +232,7 @@
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
// M666 - Wait for PINDA thermistor to reach target temperature.
// M860 - Wait for PINDA thermistor to reach target temperature.
// M900 - Set LIN_ADVANCE options, if enabled. See Configuration_adv.h for details.
// M907 - Set digital trimpot motor current using axis codes.
// M908 - Control digital trimpot directly.
@ -4968,48 +4968,6 @@ Sigma_Exit:
#endif
break;
#ifdef PINDA_THERMISTOR
case 666: // M666 - Wait for PINDA thermistor to reach target temperature.
{
int setTargetPinda = 0;
if (code_seen('S')) {
setTargetPinda = code_value();
} else {
break;
}
LCD_MESSAGERPGM(MSG_PLEASE_WAIT);
SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
cancel_heatup = false;
KEEPALIVE_STATE(NOT_BUSY);
while ( (!cancel_heatup) && current_temperature_pinda < setTargetPinda) {
if(( millis() - codenum) > 1000 ) //Print Temp Reading every 1 second while waiting.
{
SERIAL_PROTOCOLPGM("P:");
SERIAL_PROTOCOL_F(current_temperature_pinda,1);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
}
manage_heater();
manage_inactivity();
lcd_update();
}
LCD_MESSAGERPGM(MSG_OK);
break;
}
#endif //PINDA_THERMISTOR
#if defined(FAN_PIN) && FAN_PIN > -1
case 106: //M106 Fan On
if (code_seen('S')){
@ -6264,6 +6222,49 @@ case 666: // M666 - Wait for PINDA thermistor to reach target temperature.
}
break;
#ifdef PINDA_THERMISTOR
case 860: // M860 - Wait for PINDA thermistor to reach target temperature.
{
int setTargetPinda = 0;
if (code_seen('S')) {
setTargetPinda = code_value();
}
else {
break;
}
LCD_MESSAGERPGM(MSG_PLEASE_WAIT);
SERIAL_PROTOCOLPGM("Wait for PINDA target temperature:");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
cancel_heatup = false;
KEEPALIVE_STATE(NOT_BUSY);
while ((!cancel_heatup) && current_temperature_pinda < setTargetPinda) {
if ((millis() - codenum) > 1000) //Print Temp Reading every 1 second while waiting.
{
SERIAL_PROTOCOLPGM("P:");
SERIAL_PROTOCOL_F(current_temperature_pinda, 1);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOL(setTargetPinda);
SERIAL_PROTOCOLLN("");
codenum = millis();
}
manage_heater();
manage_inactivity();
lcd_update();
}
LCD_MESSAGERPGM(MSG_OK);
break;
}
#endif //PINDA_THERMISTOR
#ifdef LIN_ADVANCE
case 900: // M900: Set LIN_ADVANCE options.
gcode_M900();