3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge remote-tracking branch 'upstream/MK3' into MK3-new_lang

Browse source
This commit is contained in:
Robert Pelnar 2018-06-13 18:56:54 +02:00
commit 9608d5c832
4 changed files with 17 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Firmware/Marlin.h
View file

@ -357,7 +357,7 @@ extern uint8_t print_percent_done_silent;
extern uint16_t print_time_remaining_silent;
#define PRINT_TIME_REMAINING_INIT 65535
#define PRINT_PERCENT_DONE_INIT 255
#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == 4) || saved_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL))
#define PRINTER_ACTIVE (IS_SD_PRINTING || is_usb_printing || isPrintPaused || (custom_message_type == 4) || saved_printing || (lcd_commands_type == LCD_COMMAND_V2_CAL) || card.paused)
extern void calculate_extruder_multipliers();

5
Firmware/Marlin_main.cpp
View file

@ -8631,24 +8631,21 @@ void restore_print_from_eeprom() {
for (int i = 0; i < depth; i++) {
for (int j = 0; j < 8; j++) {
dir_name[j] = eeprom_read_byte((uint8_t*)EEPROM_DIRS + j + 8 * i);
}
dir_name[8] = '\0';
MYSERIAL.println(dir_name);
strcpy(dir_names[i], dir_name);
card.chdir(dir_name);
}
for (int i = 0; i < 8; i++) {
filename[i] = eeprom_read_byte((uint8_t*)EEPROM_FILENAME + i);
}
filename[8] = '\0';
MYSERIAL.print(filename);
strcat_P(filename, PSTR(".gco"));
sprintf_P(cmd, PSTR("M23 %s"), filename);
for (c = &cmd[4]; *c; c++)
*c = tolower(*c);
enquecommand(cmd);
uint32_t position = eeprom_read_dword((uint32_t*)(EEPROM_FILE_POSITION));
SERIAL_ECHOPGM("Position read from eeprom:");

5
Firmware/cardreader.cpp
View file

@ -523,8 +523,11 @@ void CardReader::getStatus()
SERIAL_PROTOCOL(itostr2(time%60));
SERIAL_PROTOCOLPGM("\n");
}
else if (paused) {
SERIAL_PROTOCOLLNPGM("SD print paused");
}
else if (saved_printing) {
SERIAL_PROTOCOLLNPGM("Print saved");
SERIAL_PROTOCOLLNPGM("Print saved");
}
else {
SERIAL_PROTOCOLLNPGM("Not SD printing");

12
Firmware/ultralcd.cpp
View file

@ -7137,8 +7137,18 @@ static void menu_action_sdfile(const char* filename, char* longFilename)
for (c = &cmd[4]; *c; c++)
*c = tolower(*c);
const char end[5] = ".gco";
//we are storing just first 8 characters of 8.3 filename assuming that extension is always ".gco"
for (int i = 0; i < 8; i++) {
eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, filename[i]);
if (strcmp((cmd + i + 4), end) == 0) {
//filename is shorter then 8.3, store '\0' character on position where ".gco" string was found to terminate stored string properly
eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, '\0');
break;
}
else {
eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, cmd[i + 4]);
}
}
uint8_t depth = (uint8_t)card.getWorkDirDepth();