3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Do not compile, if PINDA temperature compensation start point is lower than PINDA_MINTEMP. Document.

Browse Source
This commit is contained in:
Marek Bel 2020-06-16 02:02:12 +02:00
parent d5feed1f6a
commit 9838be8512
2 changed files with 14 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Firmware/Marlin_main.cpp
View File

@ -4561,13 +4561,15 @@ if(eSoundMode!=e_SOUND_MODE_SILENT)
/*!
### G76 - PINDA probe temperature calibration <a href="https://reprap.org/wiki/G-code#G76:_PINDA_probe_temperature_calibration">G76: PINDA probe temperature calibration</a>
This G-code is used to calibrate the temperature drift of the PINDA (inductive Sensor).
superPINDA sensor
The PINDAv2 sensor has a built-in thermistor which has the advantage that the calibration can be done once for all materials.
The Original i3 Prusa MK2/s uses PINDAv1 and this calibration improves the temperature drift, but not as good as the PINDAv2.
superPINDA sensor has internal temperature compensation and no thermistor output. There is no point of doing temperature calibration in such case.
If PINDA_THERMISTOR and DETECT_SUPERPINDA is defined during compilation, calibration is skipped with serial message "No PINDA thermistor".
This can be caused also if PINDA thermistor connection is broken or PINDA temperature is lower than PINDA_MINTEMP.
#### Example
```
@ -10493,7 +10495,11 @@ float temp_comp_interpolation(float inp_temperature) {
if (i>0) EEPROM_read_B(EEPROM_PROBE_TEMP_SHIFT + (i-1) * 2, &shift[i]); //read shift in steps from EEPROM
temp_C[i] = 50 + i * 10; //temperature in C
#ifdef PINDA_THERMISTOR
temp_C[i] = 35 + i * 5; //temperature in C
constexpr int start_compensating_temp = 35;
temp_C[i] = start_compensating_temp + i * 5; //temperature in degrees C
#ifdef DETECT_SUPERPINDA
static_assert(start_compensating_temp >= PINDA_MINTEMP, "Temperature compensation start point is lower than PINDA_MINTEMP.");
#endif //DETECT_SUPERPINDA
#else
temp_C[i] = 50 + i * 10; //temperature in C
#endif

5
Firmware/temperature.cpp
View File

@ -2197,6 +2197,11 @@ float unscalePID_d(float d)
#endif //PIDTEMP
#ifdef PINDA_THERMISTOR
//! @brief PINDA thermistor detected
//!
//! @retval true firmware should do temperature compensation and allow calibration
//! @retval false PINDA thermistor is not detected, disable temperature compensation and calibration
//!
bool has_temperature_compensation()
{
#ifdef DETECT_SUPERPINDA