3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

MK2 variants compilable

Browse source
This commit is contained in:
Robert Pelnar 2018-11-06 14:17:43 +01:00
parent c3bdd21fa5
commit 9a68501039
4 changed files with 14 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Firmware/Marlin_main.cpp
View file

@ -3423,9 +3423,11 @@ void process_commands()
}
#endif //BACKLASH_Y
#endif //TMC2130
#ifdef PAT9125
else if (code_seen("FSENSOR_RECOVER")) { //! FSENSOR_RECOVER
fsensor_restore_print_and_continue();
}
#endif //PAT9125
else if(code_seen("PRUSA")){
if (code_seen("Ping")) { //! PRUSA Ping
if (farm_mode) {

3
Firmware/mesh_bed_calibration.cpp
View file

@ -2490,7 +2490,8 @@ BedSkewOffsetDetectionResultType improve_bed_offset_and_skew(int8_t method, int8
refresh_cmd_timeout();
// Print the decrasing ID of the measurement point.
#ifdef MESH_BED_CALIBRATION_SHOW_LCD
lcd_print_at(0, next_line, mesh_point+1);
lcd_set_cursor(0, next_line);
lcd_print(mesh_point+1);
lcd_puts_P(_T(MSG_FIND_BED_OFFSET_AND_SKEW_LINE2));////MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
#endif /* MESH_BED_CALIBRATION_SHOW_LCD */

6
Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h
View file

@ -81,7 +81,9 @@ AXIS SETTINGS
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min)
#define DEFAULT_MAX_FEEDRATE {500, 500, 12, 120} // (mm/sec)
#define DEFAULT_MAX_FEEDRATE_SILENT {172, 172, 12, 120} // (mm/sec) max feedrate (M203), silent mode
#define DEFAULT_MAX_ACCELERATION {9000,9000,500,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_MAX_ACCELERATION_SILENT {960, 960, 200, 5000} // (mm/sec^2) max acceleration (M201), silent mode
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
@ -423,8 +425,10 @@ THERMISTORS SETTINGS
#define M600_TIMEOUT 600 //seconds
#define MMU_REQUIRED_FW_BUILDNR 132
#ifndef SNMM
#define SUPPORT_VERBOSITY
//#define SUPPORT_VERBOSITY
#endif
#endif //__CONFIGURATION_PRUSA_H

6
Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h
View file

@ -81,7 +81,9 @@ AXIS SETTINGS
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min)
#define DEFAULT_MAX_FEEDRATE {500, 500, 12, 120} // (mm/sec)
#define DEFAULT_MAX_FEEDRATE_SILENT {172, 172, 12, 120} // (mm/sec) max feedrate (M203), silent mode
#define DEFAULT_MAX_ACCELERATION {9000,9000,500,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
#define DEFAULT_MAX_ACCELERATION_SILENT {960, 960, 200, 5000} // (mm/sec^2) max acceleration (M201), silent mode
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // X, Y, Z and E max acceleration in mm/s^2 for retracts
@ -423,8 +425,10 @@ THERMISTORS SETTINGS
#define M600_TIMEOUT 600 //seconds
#define MMU_REQUIRED_FW_BUILDNR 132
#ifndef SNMM
#define SUPPORT_VERBOSITY
//#define SUPPORT_VERBOSITY
#endif
#endif //__CONFIGURATION_PRUSA_H