diff --git a/Firmware/Marlin_main.cpp b/Firmware/Marlin_main.cpp
index 140c680b..437af16f 100644
--- a/Firmware/Marlin_main.cpp
+++ b/Firmware/Marlin_main.cpp
@@ -4496,7 +4496,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
 			current_position[X_AXIS] = BED_X(ix, nMeasPoints);
 			current_position[Y_AXIS] = BED_Y(iy, nMeasPoints);
 
-
+			//printf_P(PSTR("[%f;%f]\n"), current_position[X_AXIS], current_position[Y_AXIS]);
 
 			world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]);
 			#ifdef SUPPORT_VERBOSITY
diff --git a/Firmware/mesh_bed_calibration.cpp b/Firmware/mesh_bed_calibration.cpp
index e50fb435..acbe3408 100644
--- a/Firmware/mesh_bed_calibration.cpp
+++ b/Firmware/mesh_bed_calibration.cpp
@@ -978,7 +978,7 @@ inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, i
         update_current_position_z();
 		//printf_P(PSTR("Zs: %f, Z: %f, delta Z: %f"), z_bckp, current_position[Z_AXIS], (z_bckp - current_position[Z_AXIS]));
 		if (abs(current_position[Z_AXIS] - z_bckp) < 0.025) {
-			printf_P(PSTR("PINDA triggered immediately, move Z higher and repeat measurement\n")); 
+			//printf_P(PSTR("PINDA triggered immediately, move Z higher and repeat measurement\n")); 
 			current_position[Z_AXIS] += 0.5;
 			go_to_current(homing_feedrate[Z_AXIS]/60);
 			current_position[Z_AXIS] = minimum_z;
@@ -999,7 +999,7 @@ inline bool find_bed_induction_sensor_point_z(float minimum_z, uint8_t n_iter, i
 //        SERIAL_ECHOLNPGM("");
 		float dz = i?abs(current_position[Z_AXIS] - (z / i)):0;
         z += current_position[Z_AXIS];
-		printf_P(PSTR("Z[%d] = %d, dz=%d\n"), i, (int)(current_position[Z_AXIS] * 1000), (int)(dz * 1000));
+		//printf_P(PSTR("Z[%d] = %d, dz=%d\n"), i, (int)(current_position[Z_AXIS] * 1000), (int)(dz * 1000));
 		if (dz > 0.05) goto error;//deviation > 50um
     }
     current_position[Z_AXIS] = z;
@@ -3107,13 +3107,13 @@ bool mbl_point_measurement_valid(uint8_t ix, uint8_t iy, uint8_t meas_points, bo
 
 		uint8_t valid_points_mask[7] = {
 					//[X_MAX,Y_MAX]
-			0b1111101,
-			0b1110111,
 			0b1111111,
-			0b0111011,
-			0b1110111,
 			0b1111111,
 			0b1110111,
+			0b1111011,
+			0b1110111,
+			0b1111111,
+			0b1111111,
 		//[0,0]
 		};
 		if (meas_points == 3) {
@@ -3130,7 +3130,7 @@ bool mbl_point_measurement_valid(uint8_t ix, uint8_t iy, uint8_t meas_points, bo
 }
 
 void mbl_single_point_interpolation(uint8_t x, uint8_t y, uint8_t meas_points) {
-	printf_P(PSTR("x = %d; y = %d \n"), x, y);
+	//printf_P(PSTR("x = %d; y = %d \n"), x, y);
 		uint8_t count = 0;
 		float z = 0;
 		if (mbl_point_measurement_valid(x, y + 1, meas_points, false)) { z += mbl.z_values[y + 1][x]; /*printf_P(PSTR("x; y+1: Z = %f \n"), mbl.z_values[y + 1][x]);*/ count++; }
diff --git a/Firmware/mesh_bed_calibration.h b/Firmware/mesh_bed_calibration.h
index 954db9c3..8adc1c11 100644
--- a/Firmware/mesh_bed_calibration.h
+++ b/Firmware/mesh_bed_calibration.h
@@ -6,10 +6,10 @@
 
 #ifdef HEATBED_V2
 
-#define BED_X0 (3.f - BED_ZERO_REF_X)
-#define BED_Y0 (10.4f - BED_ZERO_REF_Y)
-#define BED_Xn (206.f - BED_ZERO_REF_X)
-#define BED_Yn (202.4f - BED_ZERO_REF_Y)
+#define BED_X0 (2.f - BED_ZERO_REF_X) //1
+#define BED_Y0 (9.4f - BED_ZERO_REF_Y) //1
+#define BED_Xn (206.f - BED_ZERO_REF_X) //205
+#define BED_Yn (213.4f - BED_ZERO_REF_Y) //205
 
 #else
 
diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index 655b1590..d907e2c7 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -6687,14 +6687,14 @@ static void lcd_mesh_bed_leveling_settings()
 		eeprom_update_byte((uint8_t*)EEPROM_MBL_PROBE_NR, (uint8_t)mbl_z_probe_nr);
 	}
 	MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); 
-	if(points_nr == 3) MENU_ITEM_FUNCTION_P(_i("Mesh          [3x3]"), mbl_mesh_set);
-	else			   MENU_ITEM_FUNCTION_P(_i("Mesh          [7x7]"), mbl_mesh_set);
+	if(points_nr == 3) MENU_ITEM_FUNCTION_P(_i("Mesh         [3x3]"), mbl_mesh_set);
+	else			   MENU_ITEM_FUNCTION_P(_i("Mesh         [7x7]"), mbl_mesh_set);
 	MENU_ITEM_EDIT_int3_P(_i("Z-probe nr."), &mbl_z_probe_nr, 1, 5);
 	if (points_nr == 7) {
-		if (magnet_elimination) MENU_ITEM_FUNCTION_P(_i("Magnets eli    [On]"), mbl_magnets_elimination_set);
-		else				    MENU_ITEM_FUNCTION_P(_i("Magnets comp. [Off]"), mbl_magnets_elimination_set);
+		if (magnet_elimination) MENU_ITEM_FUNCTION_P(_i("Magnets comp. [On]"), mbl_magnets_elimination_set);
+		else				    MENU_ITEM_FUNCTION_P(_i("Magnets comp.[Off]"), mbl_magnets_elimination_set);
 	}
-	else					        menu_item_text_P(_i("Magnets comp. [N/A]"));
+	else					        menu_item_text_P(_i("Magnets comp.[N/A]"));
 	MENU_END();
 	/*if(menu_leaving)
 	{
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
index 424d2a7e..a6ca8c61 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h
@@ -290,10 +290,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7
diff --git a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
index 0912748a..4cd2e977 100644
--- a/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h
@@ -291,10 +291,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
index c02868c9..603274eb 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h
@@ -290,10 +290,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7
diff --git a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
index 008f1b17..a45d23c2 100644
--- a/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h
@@ -291,10 +291,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7
diff --git a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
index baebd0ec..d3e16855 100644
--- a/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h
@@ -400,10 +400,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7
diff --git a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
index a99d38f7..fed7863b 100644
--- a/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
+++ b/Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h
@@ -400,10 +400,10 @@
 #define MBL_Z_STEP 0.01
 
 // Mesh definitions
-#define MESH_MIN_X 35
-#define MESH_MAX_X 238
+#define MESH_MIN_X 24
+#define MESH_MAX_X 228
 #define MESH_MIN_Y 6
-#define MESH_MAX_Y 202
+#define MESH_MAX_Y 210
 
 // Mesh upsample definition
 #define MESH_NUM_X_POINTS 7