Merge pull request #1633 from mkbel/disable_cutter

Disable mmu filament cutter feature.

Firmware/mmu.cpp

@@ -1365,25 +1365,27 @@ bFilamentAction=false;                            // NOT in "mmu_load_to_nozzle_
   }
 }
 
+#ifdef MMU_HAS_CUTTER
 void mmu_cut_filament(uint8_t filament_nr)
 {
-bFilamentAction=false;                            // NOT in "mmu_load_to_nozzle_menu()"
-  if (degHotend0() > EXTRUDE_MINTEMP)
-  {
-    LcdUpdateDisabler disableLcdUpdate;
-    lcd_clear();
-    lcd_set_cursor(0, 1); lcd_puts_P(_i("Cutting filament")); //// c=18 r=1
-    lcd_print(" ");
-    lcd_print(filament_nr + 1);
-    mmu_filament_ramming();
-    mmu_command(MmuCmd::K0 + filament_nr);
-    manage_response(false, false, MMU_UNLOAD_MOVE);
-  }
-  else
-  {
-      show_preheat_nozzle_warning();
-  }
+    bFilamentAction=false;                            // NOT in "mmu_load_to_nozzle_menu()"
+    if (degHotend0() > EXTRUDE_MINTEMP)
+    {
+        LcdUpdateDisabler disableLcdUpdate;
+        lcd_clear();
+        lcd_set_cursor(0, 1); lcd_puts_P(_i("Cutting filament")); //// c=18 r=1
+        lcd_print(" ");
+        lcd_print(filament_nr + 1);
+        mmu_filament_ramming();
+        mmu_command(MmuCmd::K0 + filament_nr);
+        manage_response(false, false, MMU_UNLOAD_MOVE);
+    }
+    else
+    {
+        show_preheat_nozzle_warning();
+    }
 }
+#endif //MMU_HAS_CUTTER
 
 void mmu_eject_filament(uint8_t filament, bool recover)
 {
@@ -1457,11 +1459,13 @@ void mmu_continue_loading()
 			if(mmu_load_fail < 255) eeprom_update_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL, mmu_load_fail + 1);
 			if(mmu_load_fail_tot < 65535) eeprom_update_word((uint16_t*)EEPROM_MMU_LOAD_FAIL_TOT, mmu_load_fail_tot + 1);
 
+#ifdef MMU_HAS_CUTTER
 			if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
 			{
 			    mmu_command(MmuCmd::K0 + tmp_extruder);
 			    manage_response(true, true, MMU_UNLOAD_MOVE);
 			}
+#endif //MMU_HAS_CUTTER
 
             mmu_command(MmuCmd::T0 + tmp_extruder);
             manage_response(true, true, MMU_TCODE_MOVE);

Firmware/mmu.h

@@ -132,7 +132,9 @@ extern bool mmu_check_version();
 extern void mmu_show_warning();
 extern void lcd_mmu_load_to_nozzle(uint8_t filament_nr);
 extern void mmu_eject_filament(uint8_t filament, bool recover);
+#ifdef MMU_HAS_CUTTER
 extern void mmu_cut_filament(uint8_t filament_nr);
+#endif //MMU_HAS_CUTTER
 extern void mmu_continue_loading();
 extern void mmu_filament_ramming();
 extern void mmu_wait_for_heater_blocking();

Firmware/ultralcd.cpp

@@ -142,7 +142,9 @@ static void lcd_menu_fails_stats_mmu_total();
 
 static void mmu_fil_eject_menu();
 static void mmu_load_to_nozzle_menu();
+#ifdef MMU_HAS_CUTTER
 static void mmu_cut_filament_menu();
+#endif //MMU_HAS_CUTTER
 
 #if defined(TMC2130) || defined(FILAMENT_SENSOR)
 static void lcd_menu_fails_stats();
@@ -2295,6 +2297,7 @@ void lcd_set_fan_check() {
 	eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled);
 }
 
+#ifdef MMU_HAS_CUTTER
 void lcd_cutter_enabled()
 {
     if (1 == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
@@ -2306,6 +2309,7 @@ void lcd_cutter_enabled()
         eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 1);
     }
 }
+#endif //MMU_HAS_CUTTER
 
 void lcd_set_filament_autoload() {
      fsensor_autoload_set(!fsensor_autoload_enabled);
@@ -2536,10 +2540,12 @@ if(current_temperature[0]>(target_temperature[0]*0.95))
                menu_submenu(mmu_fil_eject_menu);
                break;
           case e_FILAMENT_ACTION_mmuCut:
+#ifdef MMU_HAS_CUTTER
                nLevel=bFilamentPreheatState?1:2;
                bFilamentAction=true;
                menu_back(nLevel);
                menu_submenu(mmu_cut_filament_menu);
+#endif //MMU_HAS_CUTTER
                break;
           case e_FILAMENT_ACTION_none:
                break;
@@ -5220,6 +5226,7 @@ do\
 }\
 while(0)\
 
+#ifdef MMU_HAS_CUTTER
 static bool settingsCutter()
 {
     if (mmu_enabled)
@@ -5241,7 +5248,10 @@ do\
 {\
     if(settingsCutter()) return;\
 }\
-while(0)\
+while(0)
+#else
+#define SETTINGS_CUTTER
+#endif //MMU_HAS_CUTTER
 
 #ifdef TMC2130
 #define SETTINGS_SILENT_MODE \
@@ -5919,6 +5929,7 @@ static void mmu_fil_eject_menu()
     }
 }
 
+#ifdef MMU_HAS_CUTTER
 template <uint8_t filament>
 static void mmu_cut_filament()
 {
@@ -5950,6 +5961,7 @@ else {
      else mFilamentMenu();
      }
 }
+#endif //MMU_HAS_CUTTER
 
 #ifdef SNMM
 static void fil_unload_menu()
@@ -6423,7 +6435,9 @@ static void lcd_main_menu()
 //bFilamentFirstRun=true;
           MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), extr_unload_);
 		MENU_ITEM_SUBMENU_P(_i("Eject filament"), mmu_fil_eject_menu);
+#ifdef  MMU_HAS_CUTTER
         MENU_ITEM_SUBMENU_P(_i("Cut filament"), mmu_cut_filament_menu);
+#endif //MMU_HAS_CUTTER
 	}
 	else
 	{

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -500,6 +500,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -501,6 +501,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 

Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h

@@ -500,6 +500,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 

Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h

@@ -501,6 +501,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 132
 #define MMU_FORCE_STEALTH_MODE
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -626,6 +626,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 83
 #define MMU_HWRESET
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -626,6 +626,7 @@
 #define MMU_REQUIRED_FW_BUILDNR 83
 #define MMU_HWRESET
 #define MMU_DEBUG //print communication between MMU2 and printer on serial
+//#define MMU_HAS_CUTTER
 #define MMU_IDLER_SENSOR_ATTEMPTS_NR 21 //max. number of attempts to load filament if first load failed; value for max bowden length and case when loading fails right at the beginning
 
 #endif //__CONFIGURATION_PRUSA_H