3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge pull request from XPila/V3_5

Browse source 
Lang - final corrections
This commit is contained in:
PavelSindler 2018-11-22 19:03:30 +01:00 • committed by GitHub
commit b3ab9d0ee0
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
15 changed files with 133 additions and 970 deletions

74
Firmware/Marlin_main.cpp
View file

@ -627,7 +627,7 @@ void crashdet_cancel()
lcd_print_stop(); lcd_print_stop();
}else if(saved_printing_type == PRINTING_TYPE_USB){ }else if(saved_printing_type == PRINTING_TYPE_USB){
SERIAL_ECHOLNPGM("// action:cancel"); //for Octoprint: works the same as clicking "Abort" button in Octoprint GUI SERIAL_ECHOLNPGM("// action:cancel"); //for Octoprint: works the same as clicking "Abort" button in Octoprint GUI
SERIAL_PROTOCOLLNRPGM(_T(MSG_OK)); SERIAL_PROTOCOLLNRPGM(MSG_OK);
} }
} }
@ -1150,12 +1150,12 @@ void setup()
// Check startup - does nothing if bootloader sets MCUSR to 0 // Check startup - does nothing if bootloader sets MCUSR to 0
byte mcu = MCUSR; byte mcu = MCUSR;
/* if (mcu & 1) SERIAL_ECHOLNRPGM(_T(MSG_POWERUP)); /* if (mcu & 1) SERIAL_ECHOLNRPGM(MSG_POWERUP);
if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET); if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET);
if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET); if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET);
if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET); if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET);
if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/ if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/
if (mcu & 1) puts_P(_T(MSG_POWERUP)); if (mcu & 1) puts_P(MSG_POWERUP);
if (mcu & 2) puts_P(MSG_EXTERNAL_RESET); if (mcu & 2) puts_P(MSG_EXTERNAL_RESET);
if (mcu & 4) puts_P(MSG_BROWNOUT_RESET); if (mcu & 4) puts_P(MSG_BROWNOUT_RESET);
if (mcu & 8) puts_P(MSG_WATCHDOG_RESET); if (mcu & 8) puts_P(MSG_WATCHDOG_RESET);
@ -1168,7 +1168,7 @@ void setup()
#ifdef STRING_VERSION_CONFIG_H #ifdef STRING_VERSION_CONFIG_H
#ifdef STRING_CONFIG_H_AUTHOR #ifdef STRING_CONFIG_H_AUTHOR
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(_i(" Last Updated: "));////MSG_CONFIGURATION_VER c=0 r=0 SERIAL_ECHORPGM(_n(" Last Updated: "));////MSG_CONFIGURATION_VER c=0 r=0
SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H); SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
SERIAL_ECHORPGM(_n(" | Author: "));////MSG_AUTHOR c=0 r=0 SERIAL_ECHORPGM(_n(" | Author: "));////MSG_AUTHOR c=0 r=0
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR); SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
@ -1178,9 +1178,9 @@ void setup()
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(_i(" Free Memory: "));////MSG_FREE_MEMORY c=0 r=0 SERIAL_ECHORPGM(_n(" Free Memory: "));////MSG_FREE_MEMORY c=0 r=0
SERIAL_ECHO(freeMemory()); SERIAL_ECHO(freeMemory());
SERIAL_ECHORPGM(_i(" PlannerBufferBytes: "));////MSG_PLANNER_BUFFER_BYTES c=0 r=0 SERIAL_ECHORPGM(_n(" PlannerBufferBytes: "));////MSG_PLANNER_BUFFER_BYTES c=0 r=0
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE); SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
//lcd_update_enable(false); // why do we need this?? - andre //lcd_update_enable(false); // why do we need this?? - andre
// loads data from EEPROM if available else uses defaults (and resets step acceleration rate) // loads data from EEPROM if available else uses defaults (and resets step acceleration rate)
@ -1744,7 +1744,7 @@ void loop()
if(card.logging) if(card.logging)
process_commands(); process_commands();
else else
SERIAL_PROTOCOLLNRPGM(_T(MSG_OK)); SERIAL_PROTOCOLLNRPGM(MSG_OK);
} else { } else {
card.closefile(); card.closefile();
SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED); SERIAL_PROTOCOLLNRPGM(MSG_FILE_SAVED);
@ -3748,7 +3748,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
codenum = 0; codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
if(codenum != 0) LCD_MESSAGERPGM(_i("Sleep..."));////MSG_DWELL c=0 r=0 if(codenum != 0) LCD_MESSAGERPGM(_n("Sleep..."));////MSG_DWELL c=0 r=0
st_synchronize(); st_synchronize();
codenum += millis(); // keep track of when we started waiting codenum += millis(); // keep track of when we started waiting
previous_millis_cmd = millis(); previous_millis_cmd = millis();
@ -4515,7 +4515,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
Sound_MakeSound(e_SOUND_TYPE_StandardAlert); Sound_MakeSound(e_SOUND_TYPE_StandardAlert);
bool bState; bool bState;
do { // repeat until Z-leveling o.k. do { // repeat until Z-leveling o.k.
lcd_display_message_fullscreen_P(_i("Some problem encountered, Z-levelling enforced ...")); lcd_display_message_fullscreen_P(_i("Some problem encountered, Z-leveling enforced ..."));
#ifdef TMC2130 #ifdef TMC2130
lcd_wait_for_click_delay(MSG_BED_LEVELING_FAILED_TIMEOUT); lcd_wait_for_click_delay(MSG_BED_LEVELING_FAILED_TIMEOUT);
calibrate_z_auto(); // Z-leveling (X-assembly stay up!!!) calibrate_z_auto(); // Z-leveling (X-assembly stay up!!!)
@ -5778,54 +5778,54 @@ Sigma_Exit:
#if defined(X_MIN_PIN) && X_MIN_PIN > -1 #if defined(X_MIN_PIN) && X_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN c=0 r=0 SERIAL_PROTOCOLRPGM(_n("x_min: "));////MSG_X_MIN c=0 r=0
if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){ if(READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(X_MAX_PIN) && X_MAX_PIN > -1 #if defined(X_MAX_PIN) && X_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX c=0 r=0 SERIAL_PROTOCOLRPGM(_n("x_max: "));////MSG_X_MAX c=0 r=0
if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){ if(READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1 #if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN c=0 r=0 SERIAL_PROTOCOLRPGM(_n("y_min: "));////MSG_Y_MIN c=0 r=0
if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){ if(READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1 #if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX c=0 r=0 SERIAL_PROTOCOLRPGM(_n("y_max: "));////MSG_Y_MAX c=0 r=0
if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){ if(READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Z_MIN_PIN) && Z_MIN_PIN > -1 #if defined(Z_MIN_PIN) && Z_MIN_PIN > -1
SERIAL_PROTOCOLRPGM(MSG_Z_MIN); SERIAL_PROTOCOLRPGM(MSG_Z_MIN);
if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){ if(READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
#if defined(Z_MAX_PIN) && Z_MAX_PIN > -1 #if defined(Z_MAX_PIN) && Z_MAX_PIN > -1
SERIAL_PROTOCOLRPGM(MSG_Z_MAX); SERIAL_PROTOCOLRPGM(MSG_Z_MAX);
if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){ if(READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING){
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_HIT)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_HIT);
}else{ }else{
SERIAL_PROTOCOLRPGM(_T(MSG_ENDSTOP_OPEN)); SERIAL_PROTOCOLRPGM(MSG_ENDSTOP_OPEN);
} }
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
#endif #endif
@ -5854,7 +5854,7 @@ Sigma_Exit:
extruder = code_value(); extruder = code_value();
if(extruder >= EXTRUDERS) { if(extruder >= EXTRUDERS) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO(_i("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHO(_n("M200 Invalid extruder "));////MSG_M200_INVALID_EXTRUDER c=0 r=0
break; break;
} }
} }
@ -6187,7 +6187,7 @@ Sigma_Exit:
} }
} }
else if (servo_index >= 0) { else if (servo_index >= 0) {
SERIAL_PROTOCOL(_T(MSG_OK)); SERIAL_PROTOCOL(MSG_OK);
SERIAL_PROTOCOL(" Servo "); SERIAL_PROTOCOL(" Servo ");
SERIAL_PROTOCOL(servo_index); SERIAL_PROTOCOL(servo_index);
SERIAL_PROTOCOL(": "); SERIAL_PROTOCOL(": ");
@ -6232,7 +6232,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
#endif #endif
updatePID(); updatePID();
SERIAL_PROTOCOLRPGM(_T(MSG_OK)); SERIAL_PROTOCOLRPGM(MSG_OK);
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(cs.Kp); SERIAL_PROTOCOL(cs.Kp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
@ -6256,7 +6256,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
if(code_seen('D')) cs.bedKd = scalePID_d(code_value()); if(code_seen('D')) cs.bedKd = scalePID_d(code_value());
updatePID(); updatePID();
SERIAL_PROTOCOLRPGM(_T(MSG_OK)); SERIAL_PROTOCOLRPGM(MSG_OK);
SERIAL_PROTOCOL(" p:"); SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(cs.bedKp); SERIAL_PROTOCOL(cs.bedKp);
SERIAL_PROTOCOL(" i:"); SERIAL_PROTOCOL(" i:");
@ -6388,7 +6388,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
{ {
cs.zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp cs.zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", _T(MSG_OK),PSTR(""))); SERIAL_ECHOLNRPGM(CAT4(MSG_ZPROBE_ZOFFSET, " ", MSG_OK,PSTR("")));
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
} }
else else
@ -6542,7 +6542,7 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
manage_inactivity(); manage_inactivity();
lcd_update(0); lcd_update(0);
} }
LCD_MESSAGERPGM(_T(MSG_OK)); LCD_MESSAGERPGM(MSG_OK);
break; break;
} }
@ -7078,7 +7078,7 @@ void FlushSerialRequestResend()
{ {
//char cmdbuffer[bufindr][100]="Resend:"; //char cmdbuffer[bufindr][100]="Resend:";
MYSERIAL.flush(); MYSERIAL.flush();
printf_P(_N("%S: %ld\n%S\n"), _i("Resend"), gcode_LastN + 1, _T(MSG_OK)); printf_P(_N("%S: %ld\n%S\n"), _n("Resend"), gcode_LastN + 1, MSG_OK);
} }
// Confirm the execution of a command, if sent from a serial line. // Confirm the execution of a command, if sent from a serial line.
@ -7087,7 +7087,7 @@ void ClearToSend()
{ {
previous_millis_cmd = millis(); previous_millis_cmd = millis();
if ((CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB) || (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR)) if ((CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB) || (CMDBUFFER_CURRENT_TYPE == CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR))
SERIAL_PROTOCOLLNRPGM(_T(MSG_OK)); SERIAL_PROTOCOLLNRPGM(MSG_OK);
} }
#if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3 #if MOTHERBOARD == BOARD_RAMBO_MINI_1_0 || MOTHERBOARD == BOARD_RAMBO_MINI_1_3
@ -7548,12 +7548,12 @@ void kill(const char *full_screen_message, unsigned char id)
pinMode(PS_ON_PIN,INPUT); pinMode(PS_ON_PIN,INPUT);
#endif #endif
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_i("Printer halted. kill() called!"));////MSG_ERR_KILLED c=0 r=0 SERIAL_ERRORLNRPGM(_n("Printer halted. kill() called!"));////MSG_ERR_KILLED c=0 r=0
if (full_screen_message != NULL) { if (full_screen_message != NULL) {
SERIAL_ERRORLNRPGM(full_screen_message); SERIAL_ERRORLNRPGM(full_screen_message);
lcd_display_message_fullscreen_P(full_screen_message); lcd_display_message_fullscreen_P(full_screen_message);
} else { } else {
LCD_ALERTMESSAGERPGM(_i("KILLED. "));////MSG_KILLED c=0 r=0 LCD_ALERTMESSAGERPGM(_n("KILLED. "));////MSG_KILLED c=0 r=0
} }
// FMC small patch to update the LCD before ending // FMC small patch to update the LCD before ending
@ -7581,7 +7581,7 @@ void Stop()
Stopped = true; Stopped = true;
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_T(MSG_ERR_STOPPED)); SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED);
LCD_MESSAGERPGM(_T(MSG_STOPPED)); LCD_MESSAGERPGM(_T(MSG_STOPPED));
} }
} }
@ -7676,19 +7676,19 @@ bool setTargetedHotend(int code, uint8_t &extruder)
SERIAL_ECHO_START; SERIAL_ECHO_START;
switch(code){ switch(code){
case 104: case 104:
SERIAL_ECHORPGM(_i("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHORPGM(_n("M104 Invalid extruder "));////MSG_M104_INVALID_EXTRUDER c=0 r=0
break; break;
case 105: case 105:
SERIAL_ECHO(_i("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHO(_n("M105 Invalid extruder "));////MSG_M105_INVALID_EXTRUDER c=0 r=0
break; break;
case 109: case 109:
SERIAL_ECHO(_i("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHO(_n("M109 Invalid extruder "));////MSG_M109_INVALID_EXTRUDER c=0 r=0
break; break;
case 218: case 218:
SERIAL_ECHO(_i("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHO(_n("M218 Invalid extruder "));////MSG_M218_INVALID_EXTRUDER c=0 r=0
break; break;
case 221: case 221:
SERIAL_ECHO(_i("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0 SERIAL_ECHO(_n("M221 Invalid extruder "));////MSG_M221_INVALID_EXTRUDER c=0 r=0
break; break;
} }
SERIAL_PROTOCOLLN((int)extruder); SERIAL_PROTOCOLLN((int)extruder);

20
Firmware/cardreader.cpp
View file

@ -183,23 +183,23 @@ void CardReader::initsd()
{ {
//if (!card.init(SPI_HALF_SPEED,SDSS)) //if (!card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_i("SD init fail"));////MSG_SD_INIT_FAIL c=0 r=0 SERIAL_ECHOLNRPGM(_n("SD init fail"));////MSG_SD_INIT_FAIL c=0 r=0
} }
else if (!volume.init(&card)) else if (!volume.init(&card))
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_i("volume.init failed"));////MSG_SD_VOL_INIT_FAIL c=0 r=0 SERIAL_ERRORLNRPGM(_n("volume.init failed"));////MSG_SD_VOL_INIT_FAIL c=0 r=0
} }
else if (!root.openRoot(&volume)) else if (!root.openRoot(&volume))
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_i("openRoot failed"));////MSG_SD_OPENROOT_FAIL c=0 r=0 SERIAL_ERRORLNRPGM(_n("openRoot failed"));////MSG_SD_OPENROOT_FAIL c=0 r=0
} }
else else
{ {
cardOK = true; cardOK = true;
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_i("SD card ok"));////MSG_SD_CARD_OK c=0 r=0 SERIAL_ECHOLNRPGM(_n("SD card ok"));////MSG_SD_CARD_OK c=0 r=0
} }
workDir=root; workDir=root;
curDir=&root; curDir=&root;
@ -330,7 +330,7 @@ void CardReader::diveSubfolder (const char *fileName, SdFile& dir)
SERIAL_ECHOLN(subdirname); SERIAL_ECHOLN(subdirname);
if (!dir.open(curDir, subdirname, O_READ)) if (!dir.open(curDir, subdirname, O_READ))
{ {
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL)); SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(subdirname); SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
return; return;
@ -431,7 +431,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
} }
else else
{ {
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL)); SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
} }
@ -440,7 +440,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
{ //write { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
{ {
SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL)); SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname); SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM("."); SERIAL_PROTOCOLLNPGM(".");
} }
@ -532,7 +532,7 @@ void CardReader::write_command(char *buf)
if (file.writeError) if (file.writeError)
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE)); SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE);
} }
} }
@ -544,7 +544,7 @@ void CardReader::write_command_no_newline(char *buf)
if (file.writeError) if (file.writeError)
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNRPGM(_T(MSG_SD_ERR_WRITE_TO_FILE)); SERIAL_ERRORLNRPGM(MSG_SD_ERR_WRITE_TO_FILE);
MYSERIAL.println("An error while writing to the SD Card."); MYSERIAL.println("An error while writing to the SD Card.");
} }
} }
@ -659,7 +659,7 @@ void CardReader::chdir(const char * relpath)
if(!newfile.open(*parent,relpath, O_READ)) if(!newfile.open(*parent,relpath, O_READ))
{ {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(_i("Cannot enter subdir: "));////MSG_SD_CANT_ENTER_SUBDIR c=0 r=0 SERIAL_ECHORPGM(_n("Cannot enter subdir: "));////MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
SERIAL_ECHOLN(relpath); SERIAL_ECHOLN(relpath);
} }
else else

10
Firmware/cmdqueue.cpp
View file

@ -286,7 +286,7 @@ void enquecommand(const char *cmd, bool from_progmem)
else else
strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd); strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd);
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(_T(MSG_Enqueing)); SERIAL_ECHORPGM(MSG_Enqueing);
SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE); SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE);
SERIAL_ECHOLNPGM("\""); SERIAL_ECHOLNPGM("\"");
bufindw += len + (CMDHDRSIZE + 1); bufindw += len + (CMDHDRSIZE + 1);
@ -298,7 +298,7 @@ void enquecommand(const char *cmd, bool from_progmem)
#endif /* CMDBUFFER_DEBUG */ #endif /* CMDBUFFER_DEBUG */
} else { } else {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ECHORPGM(_T(MSG_Enqueing)); SERIAL_ECHORPGM(MSG_Enqueing);
if (from_progmem) if (from_progmem)
SERIAL_PROTOCOLRPGM(cmd); SERIAL_PROTOCOLRPGM(cmd);
else else
@ -441,7 +441,7 @@ void get_command()
checksum = checksum^(*p++); checksum = checksum^(*p++);
if (int(strtol(strchr_pointer+1, NULL, 10)) != int(checksum)) { if (int(strtol(strchr_pointer+1, NULL, 10)) != int(checksum)) {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_i("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH c=0 r=0 SERIAL_ERRORRPGM(_n("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend(); FlushSerialRequestResend();
serial_count = 0; serial_count = 0;
@ -453,7 +453,7 @@ void get_command()
else else
{ {
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_i("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM c=0 r=0 SERIAL_ERRORRPGM(_n("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM c=0 r=0
SERIAL_ERRORLN(gcode_LastN); SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend(); FlushSerialRequestResend();
serial_count = 0; serial_count = 0;
@ -484,7 +484,7 @@ void get_command()
if (Stopped == true) { if (Stopped == true) {
int gcode = strtol(strchr_pointer+1, NULL, 10); int gcode = strtol(strchr_pointer+1, NULL, 10);
if (gcode >= 0 && gcode <= 3) { if (gcode >= 0 && gcode <= 3) {
SERIAL_ERRORLNRPGM(_T(MSG_ERR_STOPPED)); SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED);
LCD_MESSAGERPGM(_T(MSG_STOPPED)); LCD_MESSAGERPGM(_T(MSG_STOPPED));
} }
} }

18
Firmware/messages.c
View file

@ -25,11 +25,6 @@ const char MSG_CRASH_DETECTED[] PROGMEM_I1 = ISTR("Crash detected."); ////c=20 r
const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det. [N/A]"); ////c=0 r=0 const char MSG_CRASHDETECT_NA[] PROGMEM_I1 = ISTR("Crash det. [N/A]"); ////c=0 r=0
const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det. [off]"); ////c=0 r=0 const char MSG_CRASHDETECT_OFF[] PROGMEM_I1 = ISTR("Crash det. [off]"); ////c=0 r=0
const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det. [on]"); ////c=0 r=0 const char MSG_CRASHDETECT_ON[] PROGMEM_I1 = ISTR("Crash det. [on]"); ////c=0 r=0
const char MSG_ENDSTOP_HIT[] PROGMEM_I1 = ISTR("TRIGGERED"); ////c=0 r=0
const char MSG_ENDSTOP_OPEN[] PROGMEM_I1 = ISTR("open"); ////c=0 r=0
const char MSG_ENDSTOPS_HIT[] PROGMEM_I1 = ISTR("endstops hit: "); ////c=0 r=0
const char MSG_Enqueing[] PROGMEM_I1 = ISTR("enqueing \""); ////c=0 r=0
const char MSG_ERR_STOPPED[] PROGMEM_I1 = ISTR("Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"); ////c=0 r=0
const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0 const char MSG_ERROR[] PROGMEM_I1 = ISTR("ERROR:"); ////c=0 r=0
const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1 const char MSG_EXTRUDER[] PROGMEM_I1 = ISTR("Extruder"); ////c=17 r=1
const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1 const char MSG_FILAMENT[] PROGMEM_I1 = ISTR("Filament"); ////c=17 r=1
@ -62,11 +57,9 @@ const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[] PROGMEM_I1 = ISTR(" of 9");
const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////c=0 r=0 const char MSG_MENU_CALIBRATION[] PROGMEM_I1 = ISTR("Calibration"); ////c=0 r=0
const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=0 r=0 const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=0 r=0
const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0 const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0
const char MSG_OK[] PROGMEM_I1 = ISTR("ok"); ////c=0 r=0
const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8 const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4 const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0 const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0
const char MSG_POWERUP[] PROGMEM_I1 = ISTR("PowerUp"); ////c=0 r=0
const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20 r=0 const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20 r=0
const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4 const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4
const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20 r=0 const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20 r=0
@ -75,8 +68,6 @@ const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover pri
const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////c=0 r=0 const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////c=0 r=0
const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////c=0 r=0 const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////c=0 r=0
const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4 const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4
const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_I1 = ISTR("error writing to file"); ////c=0 r=0
const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_I1 = ISTR("open failed, File: "); ////c=0 r=0
const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20 r=0 const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20 r=0
const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20 r=0 const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20 r=0
const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20 r=0 const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed "); ////c=20 r=0
@ -122,3 +113,12 @@ const char MSG_Z_MIN[] PROGMEM_N1 = "z_min: "; ////c=0 r=0
const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////c=0 r=0 const char MSG_ZPROBE_OUT[] PROGMEM_N1 = "Z probe out. bed"; ////c=0 r=0
const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////c=0 r=0 const char MSG_ZPROBE_ZOFFSET[] PROGMEM_N1 = "Z Offset"; ////c=0 r=0
const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////c=0 r=0 const char MSG_TMC_OVERTEMP[] PROGMEM_N1 = "TMC DRIVER OVERTEMP"; ////c=0 r=0
const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////c=0 r=0
const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////c=0 r=0
const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////c=0 r=0
const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0
const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////c=0 r=0
const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////c=0 r=0
const char MSG_POWERUP[] PROGMEM_N1 = "PowerUp"; ////c=0 r=0
const char MSG_ERR_STOPPED[] PROGMEM_N1 = "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"; ////c=0 r=0
const char MSG_ENDSTOP_HIT[] PROGMEM_N1 = "TRIGGERED"; ////c=0 r=0

18
Firmware/messages.h
View file

@ -26,11 +26,6 @@ extern const char MSG_CRASH_DETECTED[];
extern const char MSG_CRASHDETECT_NA[]; extern const char MSG_CRASHDETECT_NA[];
extern const char MSG_CRASHDETECT_OFF[]; extern const char MSG_CRASHDETECT_OFF[];
extern const char MSG_CRASHDETECT_ON[]; extern const char MSG_CRASHDETECT_ON[];
extern const char MSG_ENDSTOP_HIT[];
extern const char MSG_ENDSTOP_OPEN[];
extern const char MSG_ENDSTOPS_HIT[];
extern const char MSG_Enqueing[];
extern const char MSG_ERR_STOPPED[];
extern const char MSG_ERROR[]; extern const char MSG_ERROR[];
extern const char MSG_EXTRUDER[]; extern const char MSG_EXTRUDER[];
extern const char MSG_FILAMENT[]; extern const char MSG_FILAMENT[];
@ -63,11 +58,9 @@ extern const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2[];
extern const char MSG_MENU_CALIBRATION[]; extern const char MSG_MENU_CALIBRATION[];
extern const char MSG_NO[]; extern const char MSG_NO[];
extern const char MSG_NOZZLE[]; extern const char MSG_NOZZLE[];
extern const char MSG_OK[];
extern const char MSG_PAPER[]; extern const char MSG_PAPER[];
extern const char MSG_PLACE_STEEL_SHEET[]; extern const char MSG_PLACE_STEEL_SHEET[];
extern const char MSG_PLEASE_WAIT[]; extern const char MSG_PLEASE_WAIT[];
extern const char MSG_POWERUP[];
extern const char MSG_PREHEAT_NOZZLE[]; extern const char MSG_PREHEAT_NOZZLE[];
extern const char MSG_PRESS_TO_UNLOAD[]; extern const char MSG_PRESS_TO_UNLOAD[];
extern const char MSG_PRINT_ABORTED[]; extern const char MSG_PRINT_ABORTED[];
@ -76,8 +69,6 @@ extern const char MSG_RECOVER_PRINT[];
extern const char MSG_REFRESH[]; extern const char MSG_REFRESH[];
extern const char MSG_REMOVE_STEEL_SHEET[]; extern const char MSG_REMOVE_STEEL_SHEET[];
extern const char MSG_RESUMING_PRINT[]; extern const char MSG_RESUMING_PRINT[];
extern const char MSG_SD_ERR_WRITE_TO_FILE[];
extern const char MSG_SD_OPEN_FILE_FAIL[];
extern const char MSG_SD_WORKDIR_FAIL[]; extern const char MSG_SD_WORKDIR_FAIL[];
extern const char MSG_SELFTEST_COOLING_FAN[]; extern const char MSG_SELFTEST_COOLING_FAN[];
extern const char MSG_SELFTEST_EXTRUDER_FAN[]; extern const char MSG_SELFTEST_EXTRUDER_FAN[];
@ -123,6 +114,15 @@ extern const char MSG_Z_MIN[];
extern const char MSG_ZPROBE_OUT[]; extern const char MSG_ZPROBE_OUT[];
extern const char MSG_ZPROBE_ZOFFSET[]; extern const char MSG_ZPROBE_ZOFFSET[];
extern const char MSG_TMC_OVERTEMP[]; extern const char MSG_TMC_OVERTEMP[];
extern const char MSG_Enqueing[];
extern const char MSG_ENDSTOPS_HIT[];
extern const char MSG_SD_ERR_WRITE_TO_FILE[];
extern const char MSG_OK[];
extern const char MSG_SD_OPEN_FILE_FAIL[];
extern const char MSG_ENDSTOP_OPEN[];
extern const char MSG_POWERUP[];
extern const char MSG_ERR_STOPPED[];
extern const char MSG_ENDSTOP_HIT[];
#if defined(__cplusplus) #if defined(__cplusplus)
} }

2
Firmware/planner.cpp
View file

@ -758,7 +758,7 @@ void plan_buffer_line(float x, float y, float z, const float &e, float feed_rate
de_float = 0; de_float = 0;
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOLNRPGM(_i(" cold extrusion prevented"));////MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0 SERIAL_ECHOLNRPGM(_n(" cold extrusion prevented"));////MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
} }
#ifdef PREVENT_LENGTHY_EXTRUDE #ifdef PREVENT_LENGTHY_EXTRUDE

8
Firmware/stepper.cpp
View file

@ -228,18 +228,18 @@ void checkHitEndstops()
{ {
if( endstop_x_hit || endstop_y_hit || endstop_z_hit) { if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHORPGM(_T(MSG_ENDSTOPS_HIT)); SERIAL_ECHORPGM(MSG_ENDSTOPS_HIT);
if(endstop_x_hit) { if(endstop_x_hit) {
SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/cs.axis_steps_per_unit[X_AXIS]); SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/cs.axis_steps_per_unit[X_AXIS]);
// LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("X"))); // LCD_MESSAGERPGM(CAT2((MSG_ENDSTOPS_HIT), PSTR("X")));
} }
if(endstop_y_hit) { if(endstop_y_hit) {
SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/cs.axis_steps_per_unit[Y_AXIS]); SERIAL_ECHOPAIR(" Y:",(float)endstops_trigsteps[Y_AXIS]/cs.axis_steps_per_unit[Y_AXIS]);
// LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT), PSTR("Y"))); // LCD_MESSAGERPGM(CAT2((MSG_ENDSTOPS_HIT), PSTR("Y")));
} }
if(endstop_z_hit) { if(endstop_z_hit) {
SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/cs.axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/cs.axis_steps_per_unit[Z_AXIS]);
// LCD_MESSAGERPGM(CAT2(_T(MSG_ENDSTOPS_HIT),PSTR("Z"))); // LCD_MESSAGERPGM(CAT2((MSG_ENDSTOPS_HIT),PSTR("Z")));
} }
SERIAL_ECHOLN(""); SERIAL_ECHOLN("");
endstop_x_hit=false; endstop_x_hit=false;

8
Firmware/ultralcd.cpp
View file

@ -4106,7 +4106,7 @@ void menu_setlang(unsigned char lang)
{ {
if (!lang_select(lang)) if (!lang_select(lang))
{ {
if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language from XFLASH?"), false, true)) if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language?"), false, true))
lang_boot_update_start(lang); lang_boot_update_start(lang);
lcd_update_enable(true); lcd_update_enable(true);
lcd_clear(); lcd_clear();
@ -4700,15 +4700,15 @@ static bool settingsAutoDeplete()
{ {
if (!fsensor_enabled) if (!fsensor_enabled)
{ {
if (menu_item_text_P(_i("Auto deplete[N/A]"))) return true; if (menu_item_text_P(_i("SpoolJoin [N/A]"))) return true;
} }
else if (lcd_autoDeplete) else if (lcd_autoDeplete)
{ {
if (menu_item_function_P(_i("Auto deplete [on]"), auto_deplete_switch)) return true; if (menu_item_function_P(_i("SpoolJoin [on]"), auto_deplete_switch)) return true;
} }
else else
{ {
if (menu_item_function_P(_i("Auto deplete[off]"), auto_deplete_switch)) return true; if (menu_item_function_P(_i("SpoolJoin [off]"), auto_deplete_switch)) return true;
} }
} }
return false; return false;

101
lang/lang_en.txt
View file

@ -1,15 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
@ -44,13 +32,13 @@
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -127,9 +115,6 @@
# #
"Cancel" "Cancel"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
@ -143,7 +128,7 @@
"Cooldown" "Cooldown"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -211,21 +196,12 @@
#MSG_SELFTEST_ENDSTOP c=0 r=0 #MSG_SELFTEST_ENDSTOP c=0 r=0
"Endstop" "Endstop"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
@ -394,9 +370,6 @@
#MSG_SELFTEST_CHECK_Z c=20 r=0 #MSG_SELFTEST_CHECK_Z c=20 r=0
"Checking Z axis " "Checking Z axis "
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
@ -460,9 +433,6 @@
# #
"Last print" "Last print"
#MSG_KILLED c=0 r=0
"KILLED. "
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -490,30 +460,12 @@
#MSG_LOOSE_PULLEY c=20 r=1 #MSG_LOOSE_PULLEY c=20 r=1
"Loose pulley" "Loose pulley"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
# #
"Load to nozzle" "Load to nozzle"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
@ -571,9 +523,6 @@
#MSG_MOVE_Z c=0 r=0 #MSG_MOVE_Z c=0 r=0
"Move Z" "Move Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
@ -604,27 +553,15 @@
#MSG_NOZZLE c=0 r=0 #MSG_NOZZLE c=0 r=0
"Nozzle" "Nozzle"
#MSG_OK c=0 r=0
"ok"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
# #
"Nozzle FAN" "Nozzle FAN"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -691,9 +628,6 @@
#MSG_PLEASE_WAIT c=20 r=0 #MSG_PLEASE_WAIT c=20 r=0
"Please wait" "Please wait"
#MSG_POWERUP c=0 r=0
"PowerUp"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
@ -727,9 +661,6 @@
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
@ -739,9 +670,6 @@
# #
"Print FAN" "Print FAN"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -781,9 +709,6 @@
#MSG_SECOND_SERIAL_ON c=17 r=1 #MSG_SECOND_SERIAL_ON c=17 r=1
"RPi port [on]" "RPi port [on]"
#
"Resend"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
@ -796,15 +721,9 @@
#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
"SD card [flshAir]" "SD card [flshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
# #
"Right" "Right"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
@ -847,9 +766,6 @@
# #
"Show pinda state" "Show pinda state"
#MSG_DWELL c=0 r=0
"Sleep..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
@ -880,9 +796,6 @@
# #
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
#
"Some problem encountered, Z-levelling enforced ..."
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
@ -946,9 +859,6 @@
# #
"Total print time" "Total print time"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
@ -979,9 +889,6 @@
# #
"unknown" "unknown"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."

140
lang/lang_en_cz.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerBufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
"zabraneno extruzi za studena"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
"Volna pamet: "
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
"Naposledy aktualizovano:"
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
" z 4" " z 4"
@ -59,16 +43,16 @@
"Dojely oba Z voziky k~hornimu dorazu?" "Dojely oba Z voziky k~hornimu dorazu?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Spoj Civky [zap]" "SpoolJoin [zap]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Spoj Civky [N/A]" "SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Spoj Civky [vyp]" "SpoolJoin [vyp]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Zrusit" "Zrusit"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Nelze otevrit slozku:"
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"Karta vlozena" "Karta vlozena"
@ -191,8 +171,8 @@
"Zchladit" "Zchladit"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Kopirovat vybrany jazyk do XFLASH?" "Kopirovat vybrany jazyk?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"Koncovy spinac" "Koncovy spinac"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"konc. spinace aktivovany: "
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"Konc. spinace" "Konc. spinace"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Chyba - Doslo k prepisu staticke pameti!" "Chyba - Doslo k prepisu staticke pameti!"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"chyba zapisu do souboru"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni." "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Kontrola osy Z" "Kontrola osy Z"
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"neplatny kontrolni soucet, posl. radek:"
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Vyberte extruder:" "Vyberte extruder:"
@ -614,10 +578,6 @@
"Last print" "Last print"
"\x00" "\x00"
#MSG_KILLED c=0 r=0
"KILLED. "
"ZRUSENO."
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Levy vent na trysce?" "Levy vent na trysce?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Uvolnena remenicka" "Uvolnena remenicka"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 Neplatny extruder "
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 Neplatny extruder "
# #
"Load to nozzle" "Load to nozzle"
"Zavest do trysky" "Zavest do trysky"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 Neplatny extruder "
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Kal. prvni vrstvy" "M117 Kal. prvni vrstvy"
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 Neplatny extruder "
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 Neplatny extruder "
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 Neplatny extruder "
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Hlavni nabidka" "Hlavni nabidka"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Posunout Z" "Posunout Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Zadny kontrolni soucet s cislem radku, Posl. radek:"
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Bez pohybu." "Bez pohybu."
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Tryska" "Tryska"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd." "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"nelze otevrit, Soubor: "
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"otevrit"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Nyni odstrante testovaci vytisk z tiskoveho platu." "Nyni odstrante testovaci vytisk z tiskoveho platu."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"\x00" "\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"openRoot selhal"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Pozastavit tisk" "Pozastavit tisk"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Prosim cekejte" "Prosim cekejte"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Zapnuti"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Nejprve prosim sundejte transportni soucastky." "Nejprve prosim sundejte transportni soucastky."
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Tisk pozastaven" "Tisk pozastaven"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Tiskarna zastavena. Volano kill()!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Pro pokracovani nahrivani trysky stisknete tlacitko." "Pro pokracovani nahrivani trysky stisknete tlacitko."
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"\x00" "\x00"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"Tisk zastaven kvuli chybam. Opravte chybu a pouzijte M999 pro restart. (Teplota resetovana, nastavte ji po restartu)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"Prusa i3 MK2.5 ok." "Prusa i3 MK2.5 ok."
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"RPi port [zap]" "RPi port [zap]"
#
"Resend"
"Poslat znovu"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"RPi port [vyp]" "RPi port [vyp]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"SD card [FlshAir]" "SD card [FlshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"SD karta ok"
# #
"Right" "Right"
"Vpravo" "Vpravo"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"Selhala inicializace SD"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Hledam kalibracni bod podlozky" "Hledam kalibracni bod podlozky"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Zobrazit stav PINDA" "Zobrazit stav PINDA"
#MSG_DWELL c=0 r=0
"Sleep..."
"Spankovy rezim..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Nektere soubory nebudou setrideny. Maximalni pocet souboru ve slozce pro setrideni je 100." "Nektere soubory nebudou setrideny. Maximalni pocet souboru ve slozce pro setrideni je 100."
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Vyskytl se problem, srovnavam osu Z ..." "Vyskytl se problem, srovnavam osu Z ..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Zvuk [jednou]" "Zvuk [jednou]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Celkovy cas tisku" "Celkovy cas tisku"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"AKTIVNI"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Ladit" "Ladit"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"volume.init selhalo"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Ceka se na uzivatele..." "Ceka se na uzivatele..."

140
lang/lang_en_de.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerPufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
" stopp, Extruder kalt!"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
" Freier Speicher: "
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
" Letztes Update: "
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
" von 4" " von 4"
@ -59,16 +43,16 @@
"Sind linke+rechte Z- Schlitten ganz oben?" "Sind linke+rechte Z- Schlitten ganz oben?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Restemodus [an]" "SpoolJoin [an]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Restemodus [N/V]" "SpoolJoin [N/V]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Restemodus [aus]" "SpoolJoin [aus]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Abbruch" "Abbruch"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Kann Unterverzeichnis nicht oeffnen: "
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"SD Karte eingesetzt" "SD Karte eingesetzt"
@ -191,8 +171,8 @@
"Abkuehlen" "Abkuehlen"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Gewaehlte Sprache vom Xflash kopieren?" "Gewaehlte Sprache kopieren?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"Endanschlag" "Endanschlag"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"Endanschlag erreicht: "
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"Endschalter" "Endschalter"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Fehler - statischer Speicher wurde ueberschrieben" "Fehler - statischer Speicher wurde ueberschrieben"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"Fehler beim Schreiben in Datei"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"FEHLER: Filament- sensor reagiert nicht, bitte Verbindung pruefen." "FEHLER: Filament- sensor reagiert nicht, bitte Verbindung pruefen."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Pruefe Z Achse " "Pruefe Z Achse "
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"Pruefsummenfehler, Letzte Zeile: "
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Extruder waehlen:" "Extruder waehlen:"
@ -614,10 +578,6 @@
"Last print" "Last print"
"\x00" "\x00"
#MSG_KILLED c=0 r=0
"KILLED. "
"ABGEBROCHEN. "
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Linker Luefter?" "Linker Luefter?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Lose Riemenscheibe" "Lose Riemenscheibe"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 Falscher Extruder "
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 Falscher Extruder "
# #
"Load to nozzle" "Load to nozzle"
"In Druckduese laden" "In Druckduese laden"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 Falscher Extruder "
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Erste-Schicht Kal." "M117 Erste-Schicht Kal."
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 Falscher Extruder "
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 Falscher Extruder "
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 Falscher Extruder "
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Hauptmenue" "Hauptmenue"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Bewege Z" "Bewege Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Keine Pruefsumme mit Zeilennummer, Letzte Zeile: "
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Keine Bewegung." "Keine Bewegung."
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Duese" "Duese"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt." "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"Fehler beim Oeffnen der Datei: "
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"offen"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Testdruck jetzt von Stahlblech entfernen." "Testdruck jetzt von Stahlblech entfernen."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"\x00" "\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"Zugriff auf Hauptverzeichnis misslungen"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Druck pausieren" "Druck pausieren"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Bitte warten" "Bitte warten"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Einschalten"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Bitte zuerst Transportsicherungen entfernen." "Bitte zuerst Transportsicherungen entfernen."
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Druck pausiert" "Druck pausiert"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Printer gestoppt. kill() aufgerufen!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Druecken Sie den Knopf um die Duesentemperatur wiederherzustellen" "Druecken Sie den Knopf um die Duesentemperatur wiederherzustellen"
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"\x00" "\x00"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"Drucker aufgrund von Fehlern gestoppt. Fehler beheben und mit M999 neu starten. (Temperatur wird zurueckgesetzt. Nach dem Neustart neu einstellen!)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"Prusa i3 MK2.5 bereit." "Prusa i3 MK2.5 bereit."
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"RPi Port [an]" "RPi Port [an]"
#
"Resend"
"Wiederholen"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"RPi Port [aus]" "RPi Port [aus]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"SD Karte[flshAir]" "SD Karte[flshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"SD Karte ok"
# #
"Right" "Right"
"Rechts" "Rechts"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"SD Init fehlerhaft"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Suche Bett Kalibrierpunkt" "Suche Bett Kalibrierpunkt"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Pinda-Status anzeigen" "Pinda-Status anzeigen"
#MSG_DWELL c=0 r=0
"Sleep..."
"Schlafzustand..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Einige Dateien wur- den nicht sortiert. Max. Dateien pro Verzeichnis = 100." "Einige Dateien wur- den nicht sortiert. Max. Dateien pro Verzeichnis = 100."
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Fehler aufgetreten, Z-Kalibrierung erforderlich..." "Fehler aufgetreten, Z-Kalibrierung erforderlich..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Sound [einmal]" "Sound [einmal]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Gesamte Druckzeit" "Gesamte Druckzeit"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"AUSGELOEST"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Feineinstellung" "Feineinstellung"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"Dateisystem Init fehlerhaft"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Warte auf Benutzer.." "Warte auf Benutzer.."

140
lang/lang_en_es.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerBufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
"extrusion en frio prevenida"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
"Memoria Libre: "
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
"Ultima actualizacion: "
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
" de 4" " de 4"
@ -59,16 +43,16 @@
"Carros Z izq./der. estan arriba maximo?" "Carros Z izq./der. estan arriba maximo?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Auto despleg.[on]" "SpoolJoin [on]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Auto despleg[N/A]" "SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Auto despleg[off]" "SpoolJoin [off]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Cancelar" "Cancelar"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Sin acceso subdir: "
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"Tarjeta insertada" "Tarjeta insertada"
@ -191,8 +171,8 @@
"Enfriar" "Enfriar"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Copiar idioma seleccionado desde XFLASH?" "Copiar idioma seleccionado?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"\x00" "\x00"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"endstops golpean: "
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"\x00" "\x00"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Error - se ha sobre-escrito la memoria estatica" "Error - se ha sobre-escrito la memoria estatica"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"error al escribir arch."
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"ERROR: El sensor de filamento no responde, por favor comprueba la conexion." "ERROR: El sensor de filamento no responde, por favor comprueba la conexion."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Control sensor Z" "Control sensor Z"
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"inconcluencia checksum, Ult. Linea: "
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Elegir extrusor:" "Elegir extrusor:"
@ -614,10 +578,6 @@
"Last print" "Last print"
"\x00" "\x00"
#MSG_KILLED c=0 r=0
"KILLED. "
"PARADA DE EMERGENCIA"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Vent. izquierdo?" "Vent. izquierdo?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Polea suelta" "Polea suelta"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 Extrusor invalido"
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 Extrusor invalido"
# #
"Load to nozzle" "Load to nozzle"
"Cargar a la boquilla" "Cargar a la boquilla"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 Extrusor invalido"
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Cal. primera cap." "M117 Cal. primera cap."
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 Extrusor invalido"
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 Extrusor invalido"
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 Extrusor invalido"
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Menu principal" "Menu principal"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Mover Z" "Mover Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Sin Checksum con linea numero, Ult. Linea: "
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Sin movimiento" "Sin movimiento"
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Boquilla" "Boquilla"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc" "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"error apertura, Arch.: "
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"abrir"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Ahora retira la prueba de la lamina de acero." "Ahora retira la prueba de la lamina de acero."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"\x00" "\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"fallo openRoot "
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Pausar impresion" "Pausar impresion"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Por Favor Espere" "Por Favor Espere"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Encendido"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Por favor retira los soportes de envio primero." "Por favor retira los soportes de envio primero."
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Impresion en pausa" "Impresion en pausa"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Impresora detenida. kill() activado!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Presiona el dial para continuar con la temperatura de la boquilla." "Presiona el dial para continuar con la temperatura de la boquilla."
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"\x00" "\x00"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"Impresora parada debido a errores. Arregle el error y use M999 para reinicio. (Temperatura se resetea. Ajustar despues de reinicio)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"Preparado para Prusa i3 MK2.5." "Preparado para Prusa i3 MK2.5."
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"Puerto RPi [act]" "Puerto RPi [act]"
#
"Resend"
"Reenviar: "
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"Puerto RPi [ina]" "Puerto RPi [ina]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"Tarj. SD[FlshAir]" "Tarj. SD[FlshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"Tarj. SD ok"
# #
"Right" "Right"
"Derecha" "Derecha"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"Error init SD"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Buscando punto de calibracion base" "Buscando punto de calibracion base"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Mostrar estado pinda" "Mostrar estado pinda"
#MSG_DWELL c=0 r=0
"Sleep..."
"En reposo..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. " "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar. "
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Problema encontrado, nivelacion Z forzosa ..." "Problema encontrado, nivelacion Z forzosa ..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Sonido [una vez]" "Sonido [una vez]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Tiempo total :" "Tiempo total :"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"ACTIVADO"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Ajustar" "Ajustar"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"fallo volume.init"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Esperando ordenes" "Esperando ordenes"

144
lang/lang_en_fr.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerBufferBytes : "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
"extrusion a froid evitee"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
"Memoire libre :"
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
"Derniere MAJ :"
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
"de 4" "de 4"
@ -59,16 +43,16 @@
"Chariots Z gauche et droite tout en haut?" "Chariots Z gauche et droite tout en haut?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Purge auto [on]" "SpoolJoin [on]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Vidage auto [N/A]" "SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Purge auto [off]" "SpoolJoin [off]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Annuler" "Annuler"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Impossible d'entrer dans le repertoire :"
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"Carte inseree" "Carte inseree"
@ -191,8 +171,8 @@
"Refroidissement" "Refroidissement"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Copier la langue selectionne depuis la XFLASH ?" "Copier la langue selectionne?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -244,7 +224,7 @@
#MSG_EJECT_FILAMENT c=17 r=1 #MSG_EJECT_FILAMENT c=17 r=1
"Eject filament" "Eject filament"
"Ejecter filament" "Ejecter le fil"
#MSG_EJECT_FILAMENT1 c=17 r=1 #MSG_EJECT_FILAMENT1 c=17 r=1
"Eject filament 1" "Eject filament 1"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"Butee" "Butee"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"butees atteintes :"
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"Butees" "Butees"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Erreur - la memoire statique a ete ecrasee" "Erreur - la memoire statique a ete ecrasee"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"erreur d'ecriture du fichier"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"ERREUR : Le capteur de filament ne repond pas, verifiez la connexion." "ERREUR : Le capteur de filament ne repond pas, verifiez la connexion."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Verification axe Z" "Verification axe Z"
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"dissemblance du checksum, Derniere Ligne :"
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Choisir extrudeur :" "Choisir extrudeur :"
@ -614,10 +578,6 @@
"Last print" "Last print"
"Derniere impress." "Derniere impress."
#MSG_KILLED c=0 r=0
"KILLED. "
"TUE."
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Ventilo tete gauche?" "Ventilo tete gauche?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Poulie lache" "Poulie lache"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 extrudeur invalide"
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 extrudeur invalide"
# #
"Load to nozzle" "Load to nozzle"
"Charger dans buse" "Charger le fil"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 extrudeur invalide"
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Cal. 1ere couche" "M117 Cal. 1ere couche"
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 extrudeur invalide"
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 extrudeur invalide"
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 extrudeur invalide"
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Principal" "Principal"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Deplacer Z" "Deplacer Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Pas de checksum avec numero de ligne, Derniere ligne :"
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Pas de mouvement." "Pas de mouvement."
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Buse" "Buse"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris." "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris."
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"Echec ouverture, Fichier :"
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"ouvrir"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Retirez maintenant l'impression de test de la feuille d'acier." "Retirez maintenant l'impression de test de la feuille d'acier."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"Vent buse" "Vent buse"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"Echec openRoot"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Pause de l'impres" "Pause de l'impres"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Merci de patienter" "Merci de patienter"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Demarrage"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Veuillez retirer d'abord les protections d'envoi." "Veuillez retirer d'abord les protections d'envoi."
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Impression en pause" "Impression en pause"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Imprimante stoppee. kill() appelee !"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Appuyez sur le bouton pour poursuivre la mise en temperature de la buse." "Appuyez sur le bouton pour poursuivre la mise en temperature de la buse."
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"Vent extru" "Vent extru"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"Imprimante arretee a cause d'erreurs. Corrigez l'erreur et utilisez M999 pour redemarrer. (La temperature est reinitilisee. Parametrez la apres le redemarrage)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"Prusa i3 MK2.5 prete." "Prusa i3 MK2.5 prete."
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"Port RPi [on]" "Port RPi [on]"
#
"Resend"
"Renvoyer"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"Port RPi [off]" "Port RPi [off]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"Carte SD[flshAir]" "Carte SD[flshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"Carte SD ok"
# #
"Right" "Right"
"Droite" "Droite"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"Echec init SD"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Recherche du point de calibration du lit" "Recherche du point de calibration du lit"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Etat de la PINDA" "Etat de la PINDA"
#MSG_DWELL c=0 r=0
"Sleep..."
"Repos..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Certains fichiers ne seront pas tries. Max 100 fichiers tries par dossier." "Certains fichiers ne seront pas tries. Max 100 fichiers tries par dossier."
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Problemes rencontres, nivellement de l'axe Z applique..." "Problemes rencontres, nivellement de l'axe Z applique..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Son [une fois]" "Son [une fois]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Temps total" "Temps total"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"ACTIVE"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Regler" "Regler"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"Echec volume.init"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Attente utilisateur..." "Attente utilisateur..."

140
lang/lang_en_it.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerBufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
"evitata estrusione fredda"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
"Memoria Libera: "
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
"Ultimo aggiornamento: "
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
" su 4" " su 4"
@ -59,16 +43,16 @@
"I carrelli Z sin/des sono altezza max?" "I carrelli Z sin/des sono altezza max?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Auto svuotam [on]" "SpoolJoin [on]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Auto svuotam[N/A]" "SpoolJoin [N/A]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Auto svuotam[off]" "SpoolJoin [off]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Annulla" "Annulla"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Impossibile accedere alla sottocartella: "
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"SD inserita" "SD inserita"
@ -191,8 +171,8 @@
"Raffredda" "Raffredda"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Copiare la lingua selezionata da XFLASH?" "Copiare la lingua selezionata?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"Finecorsa" "Finecorsa"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"finecorsa colpito: "
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"Finecorsa" "Finecorsa"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Errore - la memoria statica e stata sovrascritta" "Errore - la memoria statica e stata sovrascritta"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"errore scrittura sul file"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"ERRORE: il sensore filam. non risponde,Controllare conness." "ERRORE: il sensore filam. non risponde,Controllare conness."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Verifica asse Z" "Verifica asse Z"
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"mancata corrispondenza di checksum, ultima riga:"
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Seleziona estrusore:" "Seleziona estrusore:"
@ -614,10 +578,6 @@
"Last print" "Last print"
"\x00" "\x00"
#MSG_KILLED c=0 r=0
"KILLED. "
"IN TILT."
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Vent SX hotend?" "Vent SX hotend?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Puleggia lenta" "Puleggia lenta"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 Estrusore non valido"
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 Estrusore non valido"
# #
"Load to nozzle" "Load to nozzle"
"Carica ugello" "Carica ugello"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 Estrusore non valido"
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Calibrazione primo layer." "M117 Calibrazione primo layer."
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 Estrusore non valido"
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 Estrusore non valido"
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 Estrusore non valido"
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Menu principale" "Menu principale"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Muovi Z" "Muovi Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Nessun checksum con numero di riga, ultima riga:"
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Nessun movimento." "Nessun movimento."
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Ugello" "Ugello"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati" "Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati"
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"apertura fallita, File: "
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"apri"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Ora rimuovete la stampa di prova dalla piastra in acciaio." "Ora rimuovete la stampa di prova dalla piastra in acciaio."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"\x00" "\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"openRoot fallito"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Metti in pausa" "Metti in pausa"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Attendere" "Attendere"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Accendi"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Per favore rimuovete i materiali da spedizione" "Per favore rimuovete i materiali da spedizione"
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Stampa in pausa" "Stampa in pausa"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Stampante ferma. kill () chiamato!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Premete la manopola per recuperare la temperatura dell'ugello." "Premete la manopola per recuperare la temperatura dell'ugello."
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"\x00" "\x00"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"La stampante si e fermata a causa di errori. Correggete l'errore e usate M999 per riavviare. (La temperatura viene resettate. Impostatela dopo il riavvio)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"\x00" "\x00"
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"Porta RPi [on]" "Porta RPi [on]"
#
"Resend"
"Ripeti"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"Porta RPi [off]" "Porta RPi [off]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"Mem. SD [flshAir]" "Mem. SD [flshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"Memoria SD ok"
# #
"Right" "Right"
"Destra" "Destra"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"Inizializzazione Memoria SD Fallita"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Ricerca dei punti di calibrazione del piano" "Ricerca dei punti di calibrazione del piano"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Mostra stato pinda" "Mostra stato pinda"
#MSG_DWELL c=0 r=0
"Sleep..."
"Sospensione..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Alcuni file non saranno ordinati. Il numero massimo di file in una cartella e 100 perche siano ordinati." "Alcuni file non saranno ordinati. Il numero massimo di file in una cartella e 100 perche siano ordinati."
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Sono stati rilevati problemi, avviato livellamento Z ..." "Sono stati rilevati problemi, avviato livellamento Z ..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Suono [singolo]" "Suono [singolo]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Tempo di stampa totale" "Tempo di stampa totale"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"ATTIVATO"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Regola" "Regola"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"volume.init fallito"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Attendendo utente..." "Attendendo utente..."

140
lang/lang_en_pl.txt
View file

@ -1,19 +1,3 @@
#MSG_PLANNER_BUFFER_BYTES c=0 r=0
" PlannerBufferBytes: "
" PlannerBufferBytes: "
#MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0
" cold extrusion prevented"
" nie dopuszczono do zimnej ekstruzji"
#MSG_FREE_MEMORY c=0 r=0
" Free Memory: "
" Wolna pamiec:"
#MSG_CONFIGURATION_VER c=0 r=0
" Last Updated: "
" Ostatnia aktualizacja: "
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0
" of 4" " of 4"
" z 4" " z 4"
@ -59,16 +43,16 @@
"Obydwa konce osi dojechaly do gornych ogranicznikow?" "Obydwa konce osi dojechaly do gornych ogranicznikow?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"Auto deplete [on]" "SpoolJoin [on]"
"Dok. resztek [wl]" "SpoolJoin [wl]"
# #
"Auto deplete[N/A]" "SpoolJoin [N/A]"
"Dok. resztek [nd]" "SpoolJoin [nd]"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"Auto deplete[off]" "SpoolJoin [off]"
"Dok. resztek[wyl]" "SpoolJoin [wyl]"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -170,10 +154,6 @@
"Cancel" "Cancel"
"Anuluj" "Anuluj"
#MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
"Cannot enter subdir: "
"Brak dostepu do subdir: "
#MSG_SD_INSERTED c=0 r=0 #MSG_SD_INSERTED c=0 r=0
"Card inserted" "Card inserted"
"Karta wlozona" "Karta wlozona"
@ -191,8 +171,8 @@
"Chlodzenie" "Chlodzenie"
# #
"Copy selected language from XFLASH?" "Copy selected language?"
"Skopiowac wybrany jezyk z XFLASH?" "Skopiowac wybrany jezyk?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -282,26 +262,14 @@
"Endstop" "Endstop"
"Krancowka" "Krancowka"
#MSG_ENDSTOPS_HIT c=0 r=0
"endstops hit: "
"krancowki aktywowane:"
#MSG_SELFTEST_ENDSTOPS c=0 r=0 #MSG_SELFTEST_ENDSTOPS c=0 r=0
"Endstops" "Endstops"
"Krancowki" "Krancowki"
#MSG_Enqueing c=0 r=0
"enqueing \x22"
"\x00"
#MSG_STACK_ERROR c=20 r=4 #MSG_STACK_ERROR c=20 r=4
"Error - static memory has been overwritten" "Error - static memory has been overwritten"
"Blad - pamiec statyczna zostala nadpisana" "Blad - pamiec statyczna zostala nadpisana"
#MSG_SD_ERR_WRITE_TO_FILE c=0 r=0
"error writing to file"
"blad zapisywania pliku"
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"BLAD: Czujnik filamentu nie odpowiada, sprawdz polaczenie." "BLAD: Czujnik filamentu nie odpowiada, sprawdz polaczenie."
@ -526,10 +494,6 @@
"Checking Z axis " "Checking Z axis "
"Kontrola osi Z" "Kontrola osi Z"
#MSG_ERR_CHECKSUM_MISMATCH c=0 r=0
"checksum mismatch, Last Line: "
"suma kontrolna niezgodna, ostatnia linia:"
#MSG_CHOOSE_EXTRUDER c=20 r=1 #MSG_CHOOSE_EXTRUDER c=20 r=1
"Choose extruder:" "Choose extruder:"
"Wybierz ekstruder:" "Wybierz ekstruder:"
@ -614,10 +578,6 @@
"Last print" "Last print"
"\x00" "\x00"
#MSG_KILLED c=0 r=0
"KILLED. "
"PRZERWANE."
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
"Lewy went hotendu?" "Lewy went hotendu?"
@ -654,38 +614,14 @@
"Loose pulley" "Loose pulley"
"Luzne kolo pasowe" "Luzne kolo pasowe"
#MSG_M104_INVALID_EXTRUDER c=0 r=0
"M104 Invalid extruder "
"M104 Nieprawidlowy ekstruder"
#MSG_M105_INVALID_EXTRUDER c=0 r=0
"M105 Invalid extruder "
"M105 Nieprawidlowy ekstruder"
# #
"Load to nozzle" "Load to nozzle"
"Zaladuj do dyszy" "Zaladuj do dyszy"
#MSG_M109_INVALID_EXTRUDER c=0 r=0
"M109 Invalid extruder "
"M109 Nieprawidlowy ekstruder"
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
"M117 Kal. 1. warstwy" "M117 Kal. 1. warstwy"
#MSG_M200_INVALID_EXTRUDER c=0 r=0
"M200 Invalid extruder "
"M200 Nieprawidlowy ekstruder"
#MSG_M218_INVALID_EXTRUDER c=0 r=0
"M218 Invalid extruder "
"M218 Nieprawidlowy ekstruder"
#MSG_M221_INVALID_EXTRUDER c=0 r=0
"M221 Invalid extruder "
"M221 Nieprawidlowy ekstruder"
#MSG_MAIN c=0 r=0 #MSG_MAIN c=0 r=0
"Main" "Main"
"Menu glowne" "Menu glowne"
@ -762,10 +698,6 @@
"Move Z" "Move Z"
"Ruch osi Z" "Ruch osi Z"
#MSG_ERR_NO_CHECKSUM c=0 r=0
"No Checksum with line number, Last Line: "
"Brak sumy kontrolnej z numerem linii, ostatnia linia:"
#MSG_NO_MOVE c=0 r=0 #MSG_NO_MOVE c=0 r=0
"No move." "No move."
"Brak ruchu." "Brak ruchu."
@ -806,22 +738,10 @@
"Nozzle" "Nozzle"
"Dysza" "Dysza"
#MSG_OK c=0 r=0
"ok"
"\x00"
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, itp." "Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, itp."
#MSG_SD_OPEN_FILE_FAIL c=0 r=0
"open failed, File: "
"niepowodzenie otwarcia, Plik:"
#MSG_ENDSTOP_OPEN c=0 r=0
"open"
"otworz"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
"Teraz zdejmij wydruk testowy ze stolu." "Teraz zdejmij wydruk testowy ze stolu."
@ -830,10 +750,6 @@
"Nozzle FAN" "Nozzle FAN"
"\x00" "\x00"
#MSG_SD_OPENROOT_FAIL c=0 r=0
"openRoot failed"
"niepowodzenie openRoot "
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Wstrzymanie wydruku" "Wstrzymanie wydruku"
@ -922,10 +838,6 @@
"Please wait" "Please wait"
"Prosze czekac" "Prosze czekac"
#MSG_POWERUP c=0 r=0
"PowerUp"
"Uruchamianie"
# #
"Please remove shipping helpers first." "Please remove shipping helpers first."
"Najpierw usun zabezpieczenia transportowe" "Najpierw usun zabezpieczenia transportowe"
@ -970,10 +882,6 @@
"Print paused" "Print paused"
"Druk wstrzymany" "Druk wstrzymany"
#MSG_ERR_KILLED c=0 r=0
"Printer halted. kill() called!"
"Drukarka zatrzymana. Wywolano komende kill()!"
# #
"Press the knob to resume nozzle temperature." "Press the knob to resume nozzle temperature."
"Wcisnij pokretlo aby wznowic podgrzewanie dyszy." "Wcisnij pokretlo aby wznowic podgrzewanie dyszy."
@ -986,10 +894,6 @@
"Print FAN" "Print FAN"
"\x00" "\x00"
#MSG_ERR_STOPPED c=0 r=0
"Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
"Drukarka zatrzymana z powodu bledow. Usun problem i uzyj M999 aby zrestartowac. (Temperatura jest zresetowana, ustaw ja po restarcie)"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
"Prusa i3 MK2.5 gotowa" "Prusa i3 MK2.5 gotowa"
@ -1042,10 +946,6 @@
"RPi port [on]" "RPi port [on]"
"Port RPi [wl]" "Port RPi [wl]"
#
"Resend"
"Wyslij ponownie"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"Port RPi [wyl]" "Port RPi [wyl]"
@ -1062,18 +962,10 @@
"SD card [flshAir]" "SD card [flshAir]"
"Karta SD[FlshAir]" "Karta SD[FlshAir]"
#MSG_SD_CARD_OK c=0 r=0
"SD card ok"
"Karta SD OK"
# #
"Right" "Right"
"Prawa" "Prawa"
#MSG_SD_INIT_FAIL c=0 r=0
"SD init fail"
"Inicjalizacja karty SD nieudana"
#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Searching bed calibration point" "Searching bed calibration point"
"Szukam punktu kalibracyjnego na stole" "Szukam punktu kalibracyjnego na stole"
@ -1130,10 +1022,6 @@
"Show pinda state" "Show pinda state"
"Stan sondy P.I.N.D.A." "Stan sondy P.I.N.D.A."
#MSG_DWELL c=0 r=0
"Sleep..."
"Czuwanie..."
#MSG_FILE_CNT c=20 r=4 #MSG_FILE_CNT c=20 r=4
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100." "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
"Niektore pliki nie zostana posortowane. Max. liczba plikow w 1 folderze = 100." "Niektore pliki nie zostana posortowane. Max. liczba plikow w 1 folderze = 100."
@ -1174,10 +1062,6 @@
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
"Wykryto problem, wymuszono poziomowanie osi Z ..." "Wykryto problem, wymuszono poziomowanie osi Z ..."
#
"Some problem encountered, Z-levelling enforced ..."
"\x00"
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Dzwiek [1-raz]" "Dzwiek [1-raz]"
@ -1262,10 +1146,6 @@
"Total print time" "Total print time"
"Calkowity czas druku" "Calkowity czas druku"
#MSG_ENDSTOP_HIT c=0 r=0
"TRIGGERED"
"AKTYWOWANO"
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
"Strojenie" "Strojenie"
@ -1306,10 +1186,6 @@
"unknown" "unknown"
"\x00" "\x00"
#MSG_SD_VOL_INIT_FAIL c=0 r=0
"volume.init failed"
"niepowodzenie volume.init "
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
"Czekam na uzytkownika..." "Czekam na uzytkownika..."