3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Improved some english messages, added E calibration reset, E calibration feedrate decreased

Browse source
This commit is contained in:
PavelSindler 2017-01-31 10:26:36 +01:00
parent cc30f910eb
commit bb463c8fdc
6 changed files with 30 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Firmware/Marlin_main.cpp
View file

@ -3174,7 +3174,7 @@ void process_commands()
case 24: //M24 - Start SD print
card.startFileprint();
starttime=millis();
break;
break;
case 25: //M25 - Pause SD print
card.pauseSDPrint();
break;

11
Firmware/language_all.cpp
View file

@ -325,7 +325,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_LANG_TABLE[LANG
MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND_PL
};
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "X/Y skewed severly. Skew will be corrected automatically.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_EN[] PROGMEM = "XYZ callibration all right. Skew will be corrected automatically.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_CZ[] PROGMEM = "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_IT[] PROGMEM = "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_ES[] PROGMEM = "Calibracion XYZ correcta. La inclinacion se corregira automaticamente.";
@ -338,7 +338,7 @@ const char * const MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_LANG_TABLE[LANG_NU
MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME_PL
};
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN[] PROGMEM = "XYZ calibration all right. X/Y axes are slightly skewed.";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_EN[] PROGMEM = "XYZ calibration all right. X/Y axes are slightly skewed. Good job!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_CZ[] PROGMEM = "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_IT[] PROGMEM = "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!";
const char MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD_ES[] PROGMEM = "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!";
@ -1670,6 +1670,11 @@ const char * const MSG_RESEND_LANG_TABLE[1] PROGMEM = {
MSG_RESEND_EN
};
const char MSG_RESET_CALIBRATE_E_EN[] PROGMEM = "Reset E Cal.";
const char * const MSG_RESET_CALIBRATE_E_LANG_TABLE[1] PROGMEM = {
MSG_RESET_CALIBRATE_E_EN
};
const char MSG_RESTORE_FAILSAFE_EN[] PROGMEM = "Restore failsafe";
const char * const MSG_RESTORE_FAILSAFE_LANG_TABLE[1] PROGMEM = {
MSG_RESTORE_FAILSAFE_EN
@ -2475,7 +2480,7 @@ const char * const MSG_VTRAV_MIN_LANG_TABLE[1] PROGMEM = {
MSG_VTRAV_MIN_EN
};
const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for heater and bed cooling";
const char MSG_WAITING_TEMP_EN[] PROGMEM = "Waiting for nozzle and bed cooling";
const char MSG_WAITING_TEMP_CZ[] PROGMEM = "Cekani na zchladnuti trysky a podlozky.";
const char MSG_WAITING_TEMP_IT[] PROGMEM = "In attesa del raffreddamento della testina e del piatto.";
const char MSG_WAITING_TEMP_ES[] PROGMEM = "Esperando enfriamiento de la cama y del extrusor.";

2
Firmware/language_all.h
View file

@ -370,6 +370,8 @@ extern const char* const MSG_REFRESH_LANG_TABLE[1];
#define MSG_REFRESH LANG_TABLE_SELECT_EXPLICIT(MSG_REFRESH_LANG_TABLE, 0)
extern const char* const MSG_RESEND_LANG_TABLE[1];
#define MSG_RESEND LANG_TABLE_SELECT_EXPLICIT(MSG_RESEND_LANG_TABLE, 0)
extern const char* const MSG_RESET_CALIBRATE_E_LANG_TABLE[1];
#define MSG_RESET_CALIBRATE_E LANG_TABLE_SELECT_EXPLICIT(MSG_RESET_CALIBRATE_E_LANG_TABLE, 0)
extern const char* const MSG_RESTORE_FAILSAFE_LANG_TABLE[1];
#define MSG_RESTORE_FAILSAFE LANG_TABLE_SELECT_EXPLICIT(MSG_RESTORE_FAILSAFE_LANG_TABLE, 0)
extern const char* const MSG_RESUME_PRINT_LANG_TABLE[LANG_NUM];

7
Firmware/language_en.h
View file

@ -212,8 +212,8 @@
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "XYZ calibration failed. Bed calibration point was not found."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "XYZ calibration failed. Please consult the manual."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X/Y axes are slightly skewed."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "X/Y skewed severly. Skew will be corrected automatically."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "XYZ callibration all right. Skew will be corrected automatically."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "XYZ calibration failed. Left front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "XYZ calibration failed. Right front calibration point not reachable."
#define(length=20,lines=8) MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "XYZ calibration failed. Front calibration points not reachable."
@ -243,12 +243,13 @@
#define(length=20,lines=8) MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
#define(length=20, lines=4) MSG_STACK_ERROR "Error - static memory has been overwritten"
#define(length=20, lines=1) MSG_CALIBRATE_E "Calibrate E"
//#define(length=20, lines=1) MSG_RESET_CALIBRATE_E "Reset E Cal."
#define(length=20, lines=8) MSG_E_CAL_KNOB "Rotate knob until mark reaches extruder body. Click when done."
//#define(length=20, lines=1) MSG_FARM_CARD_MENU "Farm mode print"
#define(length=20, lines=8) MSG_MARK_FIL "Mark filament 100mm from extruder body. Click when done."
#define(length=20, lines=8) MSG_CLEAN_NOZZLE_E "E calibration finished. Please clean the nozzle. Click when done."
#define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for heater and bed cooling"
#define(length=20, lines=3) MSG_WAITING_TEMP "Waiting for nozzle and bed cooling"
#define(length=20, lines=2) MSG_FILAMENT_CLEAN "Is color clear?"
#define(lenght=20, lines=1) MSG_UNLOADING_FILAMENT "Unloading filament"

18
Firmware/ultralcd.cpp
View file

@ -2216,6 +2216,7 @@ void lcd_mesh_calibration_z()
#ifndef SNMM
void lcd_calibrate_extruder() {
if (degHotend0() > EXTRUDE_MINTEMP)
{
current_position[E_AXIS] = 0; //set initial position to zero
@ -2225,7 +2226,7 @@ void lcd_calibrate_extruder() {
long steps_final;
float e_steps_per_unit;
float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 3; //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 1; //3 //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion)
float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence
const char *msg_e_cal_knob = MSG_E_CAL_KNOB;
const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob);
@ -2259,7 +2260,7 @@ void lcd_calibrate_extruder() {
encoderPosition += (encoderDiff / ENCODER_PULSES_PER_STEP);
encoderDiff = 0;
if (!planner_queue_full()) {
current_position[E_AXIS] += float(abs((int)encoderPosition)) * 0.05;
current_position[E_AXIS] += float(abs((int)encoderPosition)) * 0.01; //0.05
encoderPosition = 0;
plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate, active_extruder);
@ -2300,6 +2301,13 @@ void lcd_calibrate_extruder() {
lcd_return_to_status();
}
void lcd_extr_cal_reset() {
float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT;
axis_steps_per_unit[E_AXIS] = tmp1[3];
//extrudemultiply = 100;
enquecommand_P(PSTR("M500"));
}
#endif
void lcd_toshiba_flash_air_compatibility_toggle()
@ -2377,6 +2385,9 @@ MENU_ITEM(function, MSG_CALIBRATE_BED, lcd_mesh_calibration);
MENU_ITEM(submenu, MSG_BED_CORRECTION_MENU, lcd_adjust_bed);
MENU_ITEM(submenu, MSG_SHOW_END_STOPS, menu_show_end_stops);
MENU_ITEM(gcode, MSG_CALIBRATE_BED_RESET, PSTR("M44"));
#ifndef SNMM
MENU_ITEM(function, MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
#endif
}
END_MENU();
@ -4159,8 +4170,7 @@ static void menu_action_function(menuFunc_t data) {
}
static void menu_action_sdfile(const char* filename, char* longFilename)
{
loading_flag = false;
loading_flag = false;
char cmd[30];
char* c;
sprintf_P(cmd, PSTR("M23 %s"), filename);

1
Firmware/ultralcd.h
View file

@ -226,6 +226,7 @@ void lcd_farm_sdcard_menu_w();
void lcd_wait_for_cool_down();
void adjust_bed_reset();
void lcd_extr_cal_reset();
union MenuData;