diff --git a/Firmware/messages.c b/Firmware/messages.c
index c38e50a6..c4b9cdff 100644
--- a/Firmware/messages.c
+++ b/Firmware/messages.c
@@ -53,7 +53,11 @@ const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////c=20
 const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
 const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////c=18
 const char MSG_ITERATION[] PROGMEM_I1 = ISTR("Iteration"); ////c=12
+<<<<<<< HEAD
 const char MSG_SELECT_EXTRUDER[] PROGMEM_I1 = ISTR("Select extruder:"); ////c=20
+=======
+const char MSG_CHOOSE_EXTRUDER[] PROGMEM_I1 = ISTR("Choose extruder:"); ////c=20
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 const char MSG_SELECT_FILAMENT[] PROGMEM_I1 = ISTR("Select filament:"); ////c=20
 const char MSG_LAST_PRINT[] PROGMEM_I1 = ISTR("Last print"); ////c=18
 const char MSG_LAST_PRINT_FAILURES[] PROGMEM_I1 = ISTR("Last print failures"); ////c=20
diff --git a/Firmware/messages.h b/Firmware/messages.h
index ba85eae6..e86c6a57 100644
--- a/Firmware/messages.h
+++ b/Firmware/messages.h
@@ -54,7 +54,11 @@ extern const char MSG_HEATING[];
 extern const char MSG_HEATING_COMPLETE[];
 extern const char MSG_HOMEYZ[];
 extern const char MSG_ITERATION[];
+<<<<<<< HEAD
 extern const char MSG_SELECT_EXTRUDER[];
+=======
+extern const char MSG_CHOOSE_EXTRUDER[];
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 extern const char MSG_SELECT_FILAMENT[];
 extern const char MSG_LAST_PRINT[];
 extern const char MSG_LAST_PRINT_FAILURES[];
diff --git a/lang/lang_en.txt b/lang/lang_en.txt
index b55d6896..58e5463c 100644
--- a/lang/lang_en.txt
+++ b/lang/lang_en.txt
@@ -334,8 +334,13 @@
 #MSG_SELFTEST_CHECK_Z c=20
 "Checking Z axis"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 
 #MSG_FILAMENT c=17
 "Filament"
diff --git a/lang/lang_en_da.txt b/lang/lang_en_da.txt
index 700e7cac..6caa5500 100644
--- a/lang/lang_en_da.txt
+++ b/lang/lang_en_da.txt
@@ -446,8 +446,13 @@
 "Checking Z axis"
 "\x00"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 "\x00"
 
 #MSG_FILAMENT c=17
diff --git a/lang/lang_en_de.txt b/lang/lang_en_de.txt
index a8ed33f7..b9311155 100644
--- a/lang/lang_en_de.txt
+++ b/lang/lang_en_de.txt
@@ -446,9 +446,15 @@
 "Checking Z axis"
 "Pr\xf5fe Z Achse"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
 "W\xe1hle extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+"Extruder w\xe1hlen:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 
 #MSG_FILAMENT c=17
 "Filament"
diff --git a/lang/lang_en_lb.txt b/lang/lang_en_lb.txt
index ec3c06b1..fe6c3b68 100644
--- a/lang/lang_en_lb.txt
+++ b/lang/lang_en_lb.txt
@@ -446,8 +446,13 @@
 "Checking Z axis"
 "\x00"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 "\x00"
 
 #MSG_FILAMENT c=17
diff --git a/lang/lang_en_lt.txt b/lang/lang_en_lt.txt
index a57e3a90..ddb95205 100644
--- a/lang/lang_en_lt.txt
+++ b/lang/lang_en_lt.txt
@@ -446,8 +446,13 @@
 "Checking Z axis"
 "\x00"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 "\x00"
 
 #MSG_FILAMENT c=17
diff --git a/lang/lang_en_sl.txt b/lang/lang_en_sl.txt
index 1e94d10f..ac4bdd31 100644
--- a/lang/lang_en_sl.txt
+++ b/lang/lang_en_sl.txt
@@ -446,8 +446,13 @@
 "Checking Z axis"
 "\x00"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 "\x00"
 
 #MSG_FILAMENT c=17
diff --git a/lang/lang_en_sv.txt b/lang/lang_en_sv.txt
index 88baedc9..cfedd2b5 100644
--- a/lang/lang_en_sv.txt
+++ b/lang/lang_en_sv.txt
@@ -446,8 +446,13 @@
 "Checking Z axis"
 "\x00"
 
+<<<<<<< HEAD
 #MSG_SELECT_EXTRUDER c=20
 "Select extruder:"
+=======
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 "\x00"
 
 #MSG_FILAMENT c=17
diff --git a/lang/po/Firmware.pot b/lang/po/Firmware.pot
index 335fccf6..41af2d81 100644
--- a/lang/po/Firmware.pot
+++ b/lang/po/Firmware.pot
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr ""
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr ""
 
@@ -575,9 +579,15 @@ msgstr ""
 msgid "Checking Z axis"
 msgstr ""
 
+<<<<<<< HEAD
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:56
 msgid "Select extruder:"
+=======
+# MSG_CHOOSE_EXTRUDER c=20
+#: messages.c:54
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/Firmware_cs.po b/lang/po/Firmware_cs.po
index e0e4c63c..36b3dfcc 100644
--- a/lang/po/Firmware_cs.po
+++ b/lang/po/Firmware_cs.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Det. narazu"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
 
diff --git a/lang/po/Firmware_da.po b/lang/po/Firmware_da.po
index a31422a0..45adee28 100644
--- a/lang/po/Firmware_da.po
+++ b/lang/po/Firmware_da.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/Firmware_de.po b/lang/po/Firmware_de.po
index a91de1c4..61540368 100644
--- a/lang/po/Firmware_de.po
+++ b/lang/po/Firmware_de.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Crash Erk."
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Wählen Sie ein Filament für Erste- Schichtkalibrierung aus und wählen Sie es im On-Screen-Menu aus."
 
@@ -575,10 +579,17 @@ msgstr "Prüfe Y Achse"
 msgid "Checking Z axis"
 msgstr "Prüfe Z Achse"
 
+<<<<<<< HEAD
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:56
 msgid "Select extruder:"
 msgstr "Wähle extruder:"
+=======
+# MSG_CHOOSE_EXTRUDER c=20
+#: messages.c:54
+msgid "Choose extruder:"
+msgstr "Extruder wählen:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 
 # MSG_FILAMENT c=17
 #: messages.c:35
diff --git a/lang/po/Firmware_es.po b/lang/po/Firmware_es.po
index 85ca93b3..59ff8c8f 100644
--- a/lang/po/Firmware_es.po
+++ b/lang/po/Firmware_es.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Det. choque"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Escoge un filamento para la Calibracion de la Primera Capa y seleccionalo en el menu en pantalla."
 
diff --git a/lang/po/Firmware_fr.po b/lang/po/Firmware_fr.po
index ba5b7cec..694d4cde 100644
--- a/lang/po/Firmware_fr.po
+++ b/lang/po/Firmware_fr.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Detect.crash"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Choisissez un filament pour la Calibration de la Premiere Couche et selectionnez-le depuis le menu a l'ecran."
 
diff --git a/lang/po/Firmware_it.po b/lang/po/Firmware_it.po
index d5239ab0..5de3675a 100644
--- a/lang/po/Firmware_it.po
+++ b/lang/po/Firmware_it.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Rileva.crash"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Scegli un filamento per la calibrazione del primo strato e selezionalo nel menu sullo schermo."
 
diff --git a/lang/po/Firmware_lb.po b/lang/po/Firmware_lb.po
index 004ab062..88849bc0 100644
--- a/lang/po/Firmware_lb.po
+++ b/lang/po/Firmware_lb.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/Firmware_lt.po b/lang/po/Firmware_lt.po
index 52612366..08acf4d6 100644
--- a/lang/po/Firmware_lt.po
+++ b/lang/po/Firmware_lt.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/Firmware_pl.po b/lang/po/Firmware_pl.po
index 1e8f46ab..60c58210 100644
--- a/lang/po/Firmware_pl.po
+++ b/lang/po/Firmware_pl.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Wykr.zderzen"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Wybierz filament do Kalibracji Pierwszej Warstwy i potwierdz w menu ekranowym."
 
diff --git a/lang/po/Firmware_sl.po b/lang/po/Firmware_sl.po
index d95490a0..fc261a28 100644
--- a/lang/po/Firmware_sl.po
+++ b/lang/po/Firmware_sl.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/Firmware_sv.po b/lang/po/Firmware_sv.po
index 88f2814a..20f55073 100644
--- a/lang/po/Firmware_sv.po
+++ b/lang/po/Firmware_sv.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/new/cs.po b/lang/po/new/cs.po
index 32fc2b1b..f08991df 100644
--- a/lang/po/new/cs.po
+++ b/lang/po/new/cs.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Det. narazu"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
 
diff --git a/lang/po/new/da.po b/lang/po/new/da.po
index 6e1831a4..326c3d76 100644
--- a/lang/po/new/da.po
+++ b/lang/po/new/da.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/new/de.po b/lang/po/new/de.po
index a8beb16c..bb912b45 100644
--- a/lang/po/new/de.po
+++ b/lang/po/new/de.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Crash Erk."
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Wählen Sie ein Filament für Erste- Schichtkalibrierung aus und wählen Sie es im On-Screen-Menu aus."
 
@@ -575,10 +579,17 @@ msgstr "Prüfe Y Achse"
 msgid "Checking Z axis"
 msgstr "Prüfe Z Achse"
 
+<<<<<<< HEAD
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:56
 msgid "Select extruder:"
 msgstr "Wähle extruder:"
+=======
+# MSG_CHOOSE_EXTRUDER c=20
+#: messages.c:54
+msgid "Choose extruder:"
+msgstr "Extruder wählen:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 
 # MSG_FILAMENT c=17
 #: messages.c:35
diff --git a/lang/po/new/es.po b/lang/po/new/es.po
index dec9290c..ee097634 100644
--- a/lang/po/new/es.po
+++ b/lang/po/new/es.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Det. choque"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Escoge un filamento para la Calibracion de la Primera Capa y seleccionalo en el menu en pantalla."
 
diff --git a/lang/po/new/fr.po b/lang/po/new/fr.po
index 329e46ea..fd317ba6 100644
--- a/lang/po/new/fr.po
+++ b/lang/po/new/fr.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Detect.crash"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Choisissez un filament pour la Calibration de la Premiere Couche et selectionnez-le depuis le menu a l'ecran."
 
diff --git a/lang/po/new/it.po b/lang/po/new/it.po
index 62e60039..9acdc114 100644
--- a/lang/po/new/it.po
+++ b/lang/po/new/it.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Rileva.crash"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Scegli un filamento per la calibrazione del primo strato e selezionalo nel menu sullo schermo."
 
diff --git a/lang/po/new/lb.po b/lang/po/new/lb.po
index 3f8835ba..10969be2 100644
--- a/lang/po/new/lb.po
+++ b/lang/po/new/lb.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/new/lt.po b/lang/po/new/lt.po
index 6df97d7f..118abe89 100644
--- a/lang/po/new/lt.po
+++ b/lang/po/new/lt.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/new/pl.po b/lang/po/new/pl.po
index b89de745..77c230ab 100644
--- a/lang/po/new/pl.po
+++ b/lang/po/new/pl.po
@@ -251,7 +251,11 @@ msgid "Crash det."
 msgstr "Wykr.zderzen"
 
 # MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+<<<<<<< HEAD
 #: ultralcd.cpp:4824
+=======
+#: ultralcd.cpp:4842
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
 msgstr "Wybierz filament do Kalibracji Pierwszej Warstwy i potwierdz w menu ekranowym."
 
diff --git a/lang/po/new/sl.po b/lang/po/new/sl.po
index 7fb7e583..06120375 100644
--- a/lang/po/new/sl.po
+++ b/lang/po/new/sl.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17
diff --git a/lang/po/new/sv.po b/lang/po/new/sv.po
index b44539a7..b04bf8f8 100644
--- a/lang/po/new/sv.po
+++ b/lang/po/new/sv.po
@@ -582,7 +582,11 @@ msgstr ""
 
 # MSG_SELECT_EXTRUDER c=20
 #: messages.c:54
+<<<<<<< HEAD
 msgid "Select extruder:"
+=======
+msgid "Choose extruder:"
+>>>>>>> Remove `Choose filament` as it is a duplicate of `Select filament`
 msgstr ""
 
 # MSG_FILAMENT c=17