3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Make a special welcome message for shipping/service prep

Browse Source 
Another request from our Service dept. - the user shall be prevented
from skipping the intro wizard, because otherwise some preset/calibrated
features will look like not done - especially live-z calibration.

And since there are users, who send a machine to service to perform 1st
layer calibration only, they must not omit the Z-calibration at the
start after shipping.
This commit is contained in:
D.R.racer 2021-02-17 12:53:56 +01:00
parent 7a84ad71dc
commit c3bea4d71c
3 changed files with 10 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Firmware/Marlin_main.cpp
View File

@ -756,7 +756,7 @@ static void factory_reset(char level)
lang_reset();
// Force the "Follow calibration flow" message at the next boot up.
calibration_status_store(CALIBRATION_STATUS_Z_CALIBRATION);
eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); //run wizard
eeprom_write_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 2); //run wizard
farm_mode = false;
eeprom_update_byte((uint8_t*)EEPROM_FARM_MODE, farm_mode);
@ -1564,7 +1564,7 @@ void setup()
lcd_show_fullscreen_message_and_wait_P(_i("Old settings found. Default PID, Esteps etc. will be set.")); //if EEPROM version or printer type was changed, inform user that default setting were loaded////MSG_DEFAULT_SETTINGS_LOADED c=20 r=5
Config_StoreSettings();
}
if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) {
if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) >= 1) {
lcd_wizard(WizState::Run);
}
if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 0) { //dont show calibration status messages if wizard is currently active

2
Firmware/eeprom.h
View File

@ -408,7 +408,7 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
#define EEPROM_POWER_COUNT (EEPROM_FERROR_COUNT - 1) // uint8 (orig EEPROM_UVLO_MESH_BED_LEVELING-17)
#define EEPROM_XYZ_CAL_SKEW (EEPROM_POWER_COUNT - 4) // float for skew backup
#define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1)
#define EEPROM_WIZARD_ACTIVE (EEPROM_XYZ_CAL_SKEW - 1) // 0: wizard not active, 1: wizard active, 2: wizard active without yes/no = forced calibrate Z after shipping/service prep.
#define EEPROM_BELTSTATUS_X (EEPROM_WIZARD_ACTIVE - 2) // uint16
#define EEPROM_BELTSTATUS_Y (EEPROM_BELTSTATUS_X - 2) // uint16

9
Firmware/ultralcd.cpp
View File

@ -4962,7 +4962,7 @@ void lcd_wizard(WizState state)
{
using S = WizState;
bool end = false;
int wizard_event;
int8_t wizard_event;
const char *msg = NULL;
// Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point
// other than WizState::Run - it is useful for debugging wizard.
@ -4986,7 +4986,12 @@ void lcd_wizard(WizState state)
// Btw. the flag may even trigger the viper situation on normal start this way and the user won't be able to find out why.
saved_printing = false;
wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"), false, true);////MSG_WIZARD_WELCOME c=20 r=7
if( eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE)==2){
lcd_show_fullscreen_message_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. I will guide you through a short setup process, in which the Z-axis will be calibrated. Then, you will be ready to print."));////MSG_WIZARD_WELCOME_SHIPPING c=20 r=7
wizard_event = 1;
} else {
wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"), false, true);////MSG_WIZARD_WELCOME c=20 r=7
}
if (wizard_event) {
state = S::Restore;
eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1);