3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Dictionaries updated

Browse source
This commit is contained in:
Robert Pelnar 2019-02-08 16:42:22 +01:00
parent 0069e8971b
commit cc78c616ab
6 changed files with 248 additions and 248 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

62
lang/lang_en_cz.txt
View file

@ -20,7 +20,7 @@
# #
">Cancel" ">Cancel"
"\x00" ">Zrusit"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -36,7 +36,7 @@
# #
"Ambient" "Ambient"
"\x00" "Okoli"
#MSG_PRESS c=20 r=0 #MSG_PRESS c=20 r=0
"and press the knob" "and press the knob"
@ -52,7 +52,7 @@
# #
"SpoolJoin [N/A]" "SpoolJoin [N/A]"
"SpoolJoin [N/A]" "\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]" "SpoolJoin [off]"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Kalibruji vychozi poz."
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -188,7 +188,7 @@
#MSG_CRASHDETECT_NA c=0 r=0 #MSG_CRASHDETECT_NA c=0 r=0
"Crash det. [N/A]" "Crash det. [N/A]"
"Crash det. [N/A]" "\x00"
#MSG_CRASHDETECT_OFF c=0 r=0 #MSG_CRASHDETECT_OFF c=0 r=0
"Crash det. [off]" "Crash det. [off]"
@ -204,7 +204,7 @@
# #
"Crash" "Crash"
"\x00" "Naraz"
#MSG_CURRENT c=19 r=1 #MSG_CURRENT c=19 r=1
"Current" "Current"
@ -320,7 +320,7 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "Selhani MMU"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
@ -336,7 +336,7 @@
# #
"Fail stats" "Fail stats"
"\x00" "Selhani"
#MSG_FAN_SPEED c=14 r=0 #MSG_FAN_SPEED c=14 r=0
"Fan speed" "Fan speed"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"\x00" "Vypadky filamentu"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"\x00" "Selhani posl. tisku"
# #
"Last print" "Last print"
"\x00" "Posledni tisk"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "Selhani MMU"
# #
"MMU load failed " "MMU load failed "
"\x00" "Zavedeni MMU selhalo"
# #
"MMU load fails" "MMU load fails"
"\x00" "MMU selhani zavadeni"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -688,7 +688,7 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "MMU vypadky proudu"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -704,7 +704,7 @@
# #
"MMU2 connected" "MMU2 connected"
"\x00" "MMU2 pripojeno"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -780,7 +780,7 @@
# #
"Nozzle FAN" "Nozzle FAN"
"\x00" "Trysk. vent."
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"\x00" "Vypadky proudu"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Predehrivam k zavedeni"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Predehrivam k vyjmuti"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "Stisknete hl. tlacitko"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -936,7 +936,7 @@
# #
"Print FAN" "Print FAN"
"\x00" "Tiskovy vent."
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -1004,7 +1004,7 @@
#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1
"SD card [normal]" "SD card [normal]"
"SD card [normal]" "\x00"
#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
"SD card [flshAir]" "SD card [flshAir]"
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Stav senzoru"
# #
"Sensors info" "Sensors info"
"\x00" "Senzor info"
# #
"Show pinda state" "Show pinda state"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"\x00" "Celkem selhani"
# #
"to load filament" "to load filament"
"\x00" "k zavedeni filamentu"
# #
"to unload filament" "to unload filament"
"\x00" "k vyjmuti filamentu"
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1236,7 +1236,7 @@
# #
"Total" "Total"
"\x00" "Celkem"
#MSG_USED c=19 r=1 #MSG_USED c=19 r=1
"Used during print" "Used during print"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "neznamy"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1384,4 +1384,4 @@
#MSG_OFF c=0 r=0 #MSG_OFF c=0 r=0
" [off]" " [off]"
" [vyp]" "\x00"

56
lang/lang_en_de.txt
View file

@ -20,7 +20,7 @@
# #
">Cancel" ">Cancel"
"\x00" ">Abbruch"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -36,7 +36,7 @@
# #
"Ambient" "Ambient"
"\x00" "Raumtemp."
#MSG_PRESS c=20 r=0 #MSG_PRESS c=20 r=0
"and press the knob" "and press the knob"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Kalibriere Start"
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -320,7 +320,7 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "MMU-Fehler"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
@ -336,7 +336,7 @@
# #
"Fail stats" "Fail stats"
"\x00" "Fehlerstatistik"
#MSG_FAN_SPEED c=14 r=0 #MSG_FAN_SPEED c=14 r=0
"Fan speed" "Fan speed"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"\x00" "Filam. Maengel"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"\x00" "Letzte Druckfehler"
# #
"Last print" "Last print"
"\x00" "Letzter Druck"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "MMU Fehler"
# #
"MMU load failed " "MMU load failed "
"\x00" "MMU Ladefehler"
# #
"MMU load fails" "MMU load fails"
"\x00" "MMU Ladefehler"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -688,7 +688,7 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "MMU Netzfehler"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -704,7 +704,7 @@
# #
"MMU2 connected" "MMU2 connected"
"\x00" "MMU2 verbunden"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -736,7 +736,7 @@
# #
"N/A" "N/A"
"\x00" "N.V."
#MSG_NO c=0 r=0 #MSG_NO c=0 r=0
"No" "No"
@ -780,7 +780,7 @@
# #
"Nozzle FAN" "Nozzle FAN"
"\x00" "Duesen Luefter"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"\x00" "Netzfehler"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Heizen zum Laden"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Heizen zum Entladen"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "Knopf druecken"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -936,7 +936,7 @@
# #
"Print FAN" "Print FAN"
"\x00" "Druckluefter"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Sensorstatus"
# #
"Sensors info" "Sensors info"
"\x00" "Sensoren Info"
# #
"Show pinda state" "Show pinda state"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"\x00" "Gesamte Fehler"
# #
"to load filament" "to load filament"
"\x00" "zum Filament laden"
# #
"to unload filament" "to unload filament"
"\x00" "zum Filament entladen"
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1236,7 +1236,7 @@
# #
"Total" "Total"
"\x00" "Gesamt"
#MSG_USED c=19 r=1 #MSG_USED c=19 r=1
"Used during print" "Used during print"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "unbekannt"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1384,4 +1384,4 @@
#MSG_OFF c=0 r=0 #MSG_OFF c=0 r=0
" [off]" " [off]"
" [AUS]" "\x00"

62
lang/lang_en_es.txt
View file

@ -20,7 +20,7 @@
# #
">Cancel" ">Cancel"
"\x00" ">Cancelar"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -36,7 +36,7 @@
# #
"Ambient" "Ambient"
"\x00" "Ambiente"
#MSG_PRESS c=20 r=0 #MSG_PRESS c=20 r=0
"and press the knob" "and press the knob"
@ -48,15 +48,15 @@
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"SpoolJoin [on]" "SpoolJoin [on]"
"SpoolJoin [on]" "\x00"
# #
"SpoolJoin [N/A]" "SpoolJoin [N/A]"
"SpoolJoin [N/A]" "\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]" "SpoolJoin [off]"
"SpoolJoin [off]" "\x00"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Calibrando posicion inicial"
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -204,7 +204,7 @@
# #
"Crash" "Crash"
"\x00" "Choque"
#MSG_CURRENT c=19 r=1 #MSG_CURRENT c=19 r=1
"Current" "Current"
@ -320,7 +320,7 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "Estadistica de fallos MMU"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
@ -336,7 +336,7 @@
# #
"Fail stats" "Fail stats"
"\x00" "Estadistica de fallos"
#MSG_FAN_SPEED c=14 r=0 #MSG_FAN_SPEED c=14 r=0
"Fan speed" "Fan speed"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"\x00" "Filam. acabado"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"\x00" "Ultimas impresiones fallidas"
# #
"Last print" "Last print"
"\x00" "Ultima impresion"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "Fallos MMU"
# #
"MMU load failed " "MMU load failed "
"\x00" "Carga MMU fallida"
# #
"MMU load fails" "MMU load fails"
"\x00" "Carga MMU falla"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -688,7 +688,7 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "Fallo de energia en MMU"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -704,7 +704,7 @@
# #
"MMU2 connected" "MMU2 connected"
"\x00" "MMU2 conectado"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -736,7 +736,7 @@
# #
"N/A" "N/A"
"\x00" "No disponible"
#MSG_NO c=0 r=0 #MSG_NO c=0 r=0
"No" "No"
@ -780,7 +780,7 @@
# #
"Nozzle FAN" "Nozzle FAN"
"\x00" "Ventilador de capa"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"\x00" "Cortes de energia"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Precalentar para cargar"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Precalentar para descargar"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "Pulsa el dial"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -936,7 +936,7 @@
# #
"Print FAN" "Print FAN"
"\x00" "Ventilador del extrusor"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Estado del sensor"
# #
"Sensors info" "Sensors info"
"\x00" "Informacion sensores"
# #
"Show pinda state" "Show pinda state"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"\x00" "Fallos totales"
# #
"to load filament" "to load filament"
"\x00" "para cargar el filamento"
# #
"to unload filament" "to unload filament"
"\x00" "para descargar el filamento"
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "desconocido"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1384,4 +1384,4 @@
#MSG_OFF c=0 r=0 #MSG_OFF c=0 r=0
" [off]" " [off]"
" [OFF]" "\x00"

194
lang/lang_en_fr.txt
View file

@ -12,15 +12,15 @@
#MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 #MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
"\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode" "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
"\x1b[2JLa detection de crash\x1b[1;0Hpeut etre active\x1b[2;0Hqu'en mode Normal" "\x1b[2JLa detection de crash peut etre\x1b[1;0Hactive seulement\x1b[2;0Hen mode Normal"
#MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 #MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
"\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode" "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
"\x1b[2JATTENTION :\x1b[1;0H Detection de crash\x1b[2;0H desactivee en mode\x1b[3;0H Furtif" "\x1b[2JATTENTION :\x1b[1;0HDetection de crash\x1b[2;0H desactivee en\x1b[3;0Hmode Furtif"
# #
">Cancel" ">Cancel"
"\x00" ">Annuler"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -32,7 +32,7 @@
#MSG_WIZARD_DONE c=20 r=8 #MSG_WIZARD_DONE c=20 r=8
"All is done. Happy printing!" "All is done. Happy printing!"
"Tout est termine. Bonne impression !" "Tout est pret. Bonne impression !"
# #
"Ambient" "Ambient"
@ -44,19 +44,19 @@
#MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 #MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
"Are left and right Z~carriages all up?" "Are left and right Z~carriages all up?"
"Chariots Z gauche et droite tout en haut?" "Z~carriages gauche + droite tout en haut?"
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"SpoolJoin [on]" "SpoolJoin [on]"
"SpoolJoin [on]" "\x00"
# #
"SpoolJoin [N/A]" "SpoolJoin [N/A]"
"SpoolJoin [N/A]" "\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]" "SpoolJoin [off]"
"SpoolJoin [off]" "\x00"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -68,11 +68,11 @@
#MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 #MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
"Autoloading filament available only when filament sensor is turned on..." "Autoloading filament available only when filament sensor is turned on..."
"AutoCharge du filament uniquement si le capteur de filament est active." "Chargement auto du filament uniquement si le capteur de filament est active."
#MSG_AUTOLOADING_ENABLED c=20 r=4 #MSG_AUTOLOADING_ENABLED c=20 r=4
"Autoloading filament is active, just press the knob and insert filament..." "Autoloading filament is active, just press the knob and insert filament..."
"AutoCharge actif, appuyez sur le bouton et inserez le filament." "Chargement auto du filament actif, appuyez sur le btn et inserez le fil."
#MSG_SELFTEST_AXIS_LENGTH c=0 r=0 #MSG_SELFTEST_AXIS_LENGTH c=0 r=0
"Axis length" "Axis length"
@ -88,7 +88,7 @@
#MSG_BED_DONE c=0 r=0 #MSG_BED_DONE c=0 r=0
"Bed done" "Bed done"
"Lit termine" "Plateau termine"
#MSG_BED_HEATING c=0 r=0 #MSG_BED_HEATING c=0 r=0
"Bed Heating" "Bed Heating"
@ -96,19 +96,19 @@
#MSG_BED_CORRECTION_MENU c=0 r=0 #MSG_BED_CORRECTION_MENU c=0 r=0
"Bed level correct" "Bed level correct"
"Cor courbure du lit" "Corr. niveau plateau"
#MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 #MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4
"Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset." "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
"Echec du nivellement. Capt. non declenche. Debris sur buse ? En attente d'un reset." "Echec bed leveling. Capt. non declenche. Debris sur buse ? En attente d'un reset."
#MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 #MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4
"Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset." "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
"Echec du nivellement. Capteur deconnecte ou cable casse. En attente d'un reset." "Echec du nivellement Capteur deconnecte ou cable casse. En attente d'un reset."
#MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 #MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4
"Bed leveling failed. Sensor triggered too high. Waiting for reset." "Bed leveling failed. Sensor triggered too high. Waiting for reset."
"Echec du nivellement. Capt. declenche trop trop haut. En attente d'un reset." "Echec bed leveling. Capt. declenche trop trop haut. En attente d'un reset."
#MSG_BED c=0 r=0 #MSG_BED c=0 r=0
"Bed" "Bed"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Calib. mise a 0"
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -156,7 +156,7 @@
#MSG_MENU_CALIBRATION c=0 r=0 #MSG_MENU_CALIBRATION c=0 r=0
"Calibration" "Calibration"
"Calibration" "\x00"
# #
"Cancel" "Cancel"
@ -180,7 +180,7 @@
# #
"Copy selected language?" "Copy selected language?"
"Copier la langue selectionne?" "Copier la langue selectionne ?"
#MSG_CRASHDETECT_ON c=0 r=0 #MSG_CRASHDETECT_ON c=0 r=0
"Crash det. [on]" "Crash det. [on]"
@ -188,11 +188,11 @@
#MSG_CRASHDETECT_NA c=0 r=0 #MSG_CRASHDETECT_NA c=0 r=0
"Crash det. [N/A]" "Crash det. [N/A]"
"Detect.crash[N/A]" "Detect. crash [N/A]"
#MSG_CRASHDETECT_OFF c=0 r=0 #MSG_CRASHDETECT_OFF c=0 r=0
"Crash det. [off]" "Crash det. [off]"
"Detect.crash[off]" "Detect. crash[off]"
#MSG_CRASH_DETECTED c=20 r=1 #MSG_CRASH_DETECTED c=20 r=1
"Crash detected." "Crash detected."
@ -204,7 +204,7 @@
# #
"Crash" "Crash"
"Colision" "\x00"
#MSG_CURRENT c=19 r=1 #MSG_CURRENT c=19 r=1
"Current" "Current"
@ -220,11 +220,11 @@
#MSG_BABYSTEP_Z_NOT_SET c=20 r=12 #MSG_BABYSTEP_Z_NOT_SET c=20 r=12
"Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration." "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
"La distance entre la pointe de la buse et la surface du lit n'a pas encore ete reglee. Suivez le manuel, chapitre Premiers pas, section Calibration de la premiere couche." "La distance entre la pointe de la buse et la surface du plateau n'a pas encore ete reglee. Suivez le manuel, chapitre Premiers pas, section Calibration de la premiere couche."
#MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 #MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
"Do you want to repeat last step to readjust distance between nozzle and heatbed?" "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
"Voulez-vous repeter la derniere etape pour reajuster la distance entre la buse et le lit chauffant ?" "Voulez-vous repeter la derniere etape pour reajuster la distance entre la buse et le plateau chauffant ?"
#MSG_EXTRUDER_CORRECTION c=9 r=0 #MSG_EXTRUDER_CORRECTION c=9 r=0
"E-correct" "E-correct"
@ -232,7 +232,7 @@
#MSG_EJECT_FILAMENT c=17 r=1 #MSG_EJECT_FILAMENT c=17 r=1
"Eject filament" "Eject filament"
"Ejecter le fil" "Ejecter le fil."
#MSG_EJECT_FILAMENT1 c=17 r=1 #MSG_EJECT_FILAMENT1 c=17 r=1
"Eject filament 1" "Eject filament 1"
@ -260,7 +260,7 @@
#MSG_EJECTING_FILAMENT c=20 r=1 #MSG_EJECTING_FILAMENT c=20 r=1
"Ejecting filament" "Ejecting filament"
"Filament en cours d'ejection" "Ejection filament"
#MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 #MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1
"Endstop not hit" "Endstop not hit"
@ -280,7 +280,7 @@
#MSG_FSENS_NOT_RESPONDING c=20 r=4 #MSG_FSENS_NOT_RESPONDING c=20 r=4
"ERROR: Filament sensor is not responding, please check connection." "ERROR: Filament sensor is not responding, please check connection."
"ERREUR : Le capteur de filament ne repond pas, verifiez la connexion." "ERREUR : Le capteur de filament ne repond pas, verifiez le branchement."
#MSG_ERROR c=0 r=0 #MSG_ERROR c=0 r=0
"ERROR:" "ERROR:"
@ -320,11 +320,11 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "Stat. echecs MMU"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
"AutoCharg F [on]" "ChargAuto f. [on]"
#MSG_FSENS_AUTOLOAD_NA c=17 r=1 #MSG_FSENS_AUTOLOAD_NA c=17 r=1
"F. autoload [N/A]" "F. autoload [N/A]"
@ -348,7 +348,7 @@
#MSG_FANS_CHECK_ON c=17 r=1 #MSG_FANS_CHECK_ON c=17 r=1
"Fans check [on]" "Fans check [on]"
"Verif venti [on]" "Verif ventilo[on]"
#MSG_FANS_CHECK_OFF c=17 r=1 #MSG_FANS_CHECK_OFF c=17 r=1
"Fans check [off]" "Fans check [off]"
@ -360,11 +360,11 @@
#MSG_RESPONSE_POOR c=20 r=2 #MSG_RESPONSE_POOR c=20 r=2
"Fil. sensor response is poor, disable it?" "Fil. sensor response is poor, disable it?"
"La reponse du capteur de fil. est pauvre, le desactiver ?" "Capteur de fil. non precis, desactiver ?"
#MSG_FSENSOR_NA c=0 r=0 #MSG_FSENSOR_NA c=0 r=0
"Fil. sensor [N/A]" "Fil. sensor [N/A]"
"Capteur Fil.[N/A]" "Capteur Fil. [N/A]"
#MSG_FSENSOR_OFF c=0 r=0 #MSG_FSENSOR_OFF c=0 r=0
"Fil. sensor [off]" "Fil. sensor [off]"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"Manque de flm" "Fins de filament"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -412,7 +412,7 @@
#MSG_WIZARD_SELFTEST c=20 r=8 #MSG_WIZARD_SELFTEST c=20 r=8
"First, I will run the selftest to check most common assembly problems." "First, I will run the selftest to check most common assembly problems."
"D'abord, je vais lancer l'autotest pour verifier les problemes d'assemblage les plus communs." "D'abord, je vais lancer le Selftest pour verifier les problemes d'assemblage les plus communs."
# #
"Fix the issue and then press button on MMU unit." "Fix the issue and then press button on MMU unit."
@ -528,7 +528,7 @@
#MSG_WIZARD_V2_CAL_2 c=20 r=12 #MSG_WIZARD_V2_CAL_2 c=20 r=12
"I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration." "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
"Je vais commencer a imprimer une ligne et vous baisserez au fur et a mesure la buse en tournant le bouton jusqu'a atteindre la hauteur optimale. Regardez les photos dans notre manuel au chapitre Calibration." "Je vais commencer a imprimer une ligne et vous baisserez au fur et a mesure la buse en tournant le bouton jusqu'a atteindre la hauteur optimale. Regardez les photos dans notre manuel au chapitre Calibration"
#MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 #MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0
"Improving bed calibration point" "Improving bed calibration point"
@ -540,19 +540,19 @@
#MSG_FILAMENT_LOADING_T0 c=20 r=4 #MSG_FILAMENT_LOADING_T0 c=20 r=4
"Insert filament into extruder 1. Click when done." "Insert filament into extruder 1. Click when done."
"Inserez le filament dans l'extrudeur 1. Cliquez une fois fait." "Inserez le filament dans l'extrudeur 1. Cliquez une fois pret."
#MSG_FILAMENT_LOADING_T1 c=20 r=4 #MSG_FILAMENT_LOADING_T1 c=20 r=4
"Insert filament into extruder 2. Click when done." "Insert filament into extruder 2. Click when done."
"Inserez le filament dans l'extrudeur 2. Cliquez une fois fait." "Inserez le filament dans l'extrudeur 2. Cliquez une fois pret."
#MSG_FILAMENT_LOADING_T2 c=20 r=4 #MSG_FILAMENT_LOADING_T2 c=20 r=4
"Insert filament into extruder 3. Click when done." "Insert filament into extruder 3. Click when done."
"Inserez le filament dans l'extrudeur 3. Cliquez une fois fait." "Inserez le filament dans l'extrudeur 3. Cliquez une fois pret."
#MSG_FILAMENT_LOADING_T3 c=20 r=4 #MSG_FILAMENT_LOADING_T3 c=20 r=4
"Insert filament into extruder 4. Click when done." "Insert filament into extruder 4. Click when done."
"Inserez le filament dans l'extrudeur 4. Cliquez une fois fait." "Inserez le filament dans l'extrudeur 4. Cliquez une fois pret."
# #
"Is filament 1 loaded?" "Is filament 1 loaded?"
@ -576,7 +576,7 @@
#MSG_STEEL_SHEET_CHECK c=20 r=2 #MSG_STEEL_SHEET_CHECK c=20 r=2
"Is steel sheet on heatbed?" "Is steel sheet on heatbed?"
"Feuille d'acier sur le lit chauffant ?" "Feuille d'acier sur plateau chauffant ?"
#MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 #MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0
"Iteration " "Iteration "
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"Echecs d'impr. dern." "Echecs derniere impr"
# #
"Last print" "Last print"
"Derniere impress." "Derniere impression"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -608,7 +608,7 @@
#MSG_BABYSTEP_Z c=0 r=0 #MSG_BABYSTEP_Z c=0 r=0
"Live adjust Z" "Live adjust Z"
"Ajuster Z en dir" "Ajuster Z en direct"
#MSG_LOAD_FILAMENT c=17 r=0 #MSG_LOAD_FILAMENT c=17 r=0
"Load filament" "Load filament"
@ -628,7 +628,7 @@
# #
"Load to nozzle" "Load to nozzle"
"Charger le fil" "Charger dans la buse"
#MSG_M117_V2_CALIBRATION c=25 r=1 #MSG_M117_V2_CALIBRATION c=25 r=1
"M117 First layer cal." "M117 First layer cal."
@ -644,7 +644,7 @@
#MSG_MESH_BED_LEVELING c=0 r=0 #MSG_MESH_BED_LEVELING c=0 r=0
"Mesh Bed Leveling" "Mesh Bed Leveling"
"Nivelage du lit" "\x00"
#MSG_MMU_OK_RESUMING_POSITION c=20 r=4 #MSG_MMU_OK_RESUMING_POSITION c=20 r=4
"MMU OK. Resuming position..." "MMU OK. Resuming position..."
@ -652,7 +652,7 @@
#MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4 #MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
"MMU OK. Resuming temperature..." "MMU OK. Resuming temperature..."
"MMU OK. Reprise de la temperature ..." "MMU OK. Remontee en temperature..."
# #
"Measured skew" "Measured skew"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "Echec MMU"
# #
"MMU load failed " "MMU load failed "
"\x00" "Echec chargement MMU"
# #
"MMU load fails" "MMU load fails"
"\x00" "Echecs charg. MMU"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -676,7 +676,7 @@
#MSG_STEALTH_MODE_OFF c=0 r=0 #MSG_STEALTH_MODE_OFF c=0 r=0
"Mode [Normal]" "Mode [Normal]"
"Mode [Normal]" "\x00"
#MSG_SILENT_MODE_ON c=0 r=0 #MSG_SILENT_MODE_ON c=0 r=0
"Mode [silent]" "Mode [silent]"
@ -688,23 +688,23 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "Echecs alim. MMU"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
"Mode [Furtif]" "Mode [Furtif]"
#MSG_AUTO_MODE_ON c=0 r=0 #MSG_AUTO_MODE_ON c=0 r=0
"Mode [auto power]" "Mode [auto power]"
"Mode[puissan.aut]" "Mode [puiss.auto]"
#MSG_SILENT_MODE_OFF c=0 r=0 #MSG_SILENT_MODE_OFF c=0 r=0
"Mode [high power]" "Mode [high power]"
"Mode[haute puiss]" "Mode [haute puiss]"
# #
"MMU2 connected" "MMU2 connected"
"MMU2 connectée" "MMU2 connecte"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -748,7 +748,7 @@
# #
"New firmware version available:" "New firmware version available:"
"Nouvelle version de firmware disponible :" "Nouvelle version de firmware disponible:"
# #
"No " "No "
@ -760,7 +760,7 @@
#MSG_WIZARD_V2_CAL c=20 r=8 #MSG_WIZARD_V2_CAL c=20 r=8
"Now I will calibrate distance between tip of the nozzle and heatbed surface." "Now I will calibrate distance between tip of the nozzle and heatbed surface."
"Maintenant je vais calibrer la distance entre la pointe de la buse et le surface du lit chauffant." "Maintenant je vais calibrer la distance entre la pointe de la buse et la surface du plateau chauffant."
#MSG_WIZARD_WILL_PREHEAT c=20 r=4 #MSG_WIZARD_WILL_PREHEAT c=20 r=4
"Now I will preheat nozzle for PLA." "Now I will preheat nozzle for PLA."
@ -772,7 +772,7 @@
#MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
"Old settings found. Default PID, Esteps etc. will be set." "Old settings found. Default PID, Esteps etc. will be set."
"Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris." "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront regles"
# #
"Now remove the test print from steel sheet." "Now remove the test print from steel sheet."
@ -780,11 +780,11 @@
# #
"Nozzle FAN" "Nozzle FAN"
"Vent buse" "Ventilateur buse"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
"Pause de l'impres" "Pause de l'impr."
#MSG_PID_RUNNING c=20 r=1 #MSG_PID_RUNNING c=20 r=1
"PID cal. " "PID cal. "
@ -804,11 +804,11 @@
#MSG_PAPER c=20 r=8 #MSG_PAPER c=20 r=8
"Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately." "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
"Placez une feuille de papier sous la buse pendant la calibration des 4 premiers points. Si la buse accroche le papier, eteignez de suite l'imprimante." "Placez une feuille de papier sous la buse pendant la calibration des 4 premiers points. Si la buse accroche le papier, eteignez vite l'imprimante."
#MSG_WIZARD_CLEAN_HEATBED c=20 r=8 #MSG_WIZARD_CLEAN_HEATBED c=20 r=8
"Please clean heatbed and then press the knob." "Please clean heatbed and then press the knob."
"Nettoyez le lit chauffant et appuyez sur le bouton." "Nettoyez le plateau chauffant et appuyez sur le bouton."
#MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 #MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
"Please clean the nozzle for calibration. Click when done." "Please clean the nozzle for calibration. Click when done."
@ -824,7 +824,7 @@
#MSG_WIZARD_LOAD_FILAMENT c=20 r=8 #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
"Please insert PLA filament to the extruder, then press knob to load it." "Please insert PLA filament to the extruder, then press knob to load it."
"Inserez du filament PLA dans l'extrudeur, puis appuyez sur le bouton pour le charger." "Inserez du filament PLA dans l'extrudeur puis appuyez sur le bouton pour le charger."
#MSG_PLEASE_LOAD_PLA c=20 r=4 #MSG_PLEASE_LOAD_PLA c=20 r=4
"Please load PLA filament first." "Please load PLA filament first."
@ -832,11 +832,11 @@
#MSG_CHECK_IDLER c=20 r=4 #MSG_CHECK_IDLER c=20 r=4
"Please open idler and remove filament manually." "Please open idler and remove filament manually."
"Ouvrez le support de poulie et retirez le filament manuellement." "Ouvrez l'idler et retirez le filament manuellement."
#MSG_PLACE_STEEL_SHEET c=20 r=4 #MSG_PLACE_STEEL_SHEET c=20 r=4
"Please place steel sheet on heatbed." "Please place steel sheet on heatbed."
"Placez la feuille d'acier sur le lit chauffant." "Placez la feuille d'acier sur le plateau chauffant."
#MSG_PRESS_TO_UNLOAD c=20 r=4 #MSG_PRESS_TO_UNLOAD c=20 r=4
"Please press the knob to unload filament" "Please press the knob to unload filament"
@ -856,7 +856,7 @@
#MSG_REMOVE_STEEL_SHEET c=20 r=4 #MSG_REMOVE_STEEL_SHEET c=20 r=4
"Please remove steel sheet from heatbed." "Please remove steel sheet from heatbed."
"Retirez la feuille d'acier du lit chauffant" "Retirez la feuille d'acier du plateau chauffant."
#MSG_RUN_XYZ c=20 r=4 #MSG_RUN_XYZ c=20 r=4
"Please run XYZ calibration first." "Please run XYZ calibration first."
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"Coupures" "Coupures de courant"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Chauffe pour charger"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Chauffe pr decharger"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "App. sur sur bouton"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -932,11 +932,11 @@
#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 #MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow." "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
"L'imprimante n'a pas encore ete calibree. Suivez le manuel, chapitre Premiers pas, section Processus de calibration" "L'imprimante n'a pas encore ete calibree. Suivez le manuel, chapitre Premiers pas, section Processus de calibration."
# #
"Print FAN" "Print FAN"
"Vent extru" "Ventilo impression"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -992,11 +992,11 @@
#MSG_SECOND_SERIAL_ON c=17 r=1 #MSG_SECOND_SERIAL_ON c=17 r=1
"RPi port [on]" "RPi port [on]"
"Port RPi [on]" "Port RPi [on]"
#MSG_SECOND_SERIAL_OFF c=17 r=1 #MSG_SECOND_SERIAL_OFF c=17 r=1
"RPi port [off]" "RPi port [off]"
"Port RPi [off]" "Port RPi [off]"
#MSG_WIZARD_RERUN c=20 r=7 #MSG_WIZARD_RERUN c=20 r=7
"Running Wizard will delete current calibration results and start from the beginning. Continue?" "Running Wizard will delete current calibration results and start from the beginning. Continue?"
@ -1008,7 +1008,7 @@
#MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 #MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1
"SD card [flshAir]" "SD card [flshAir]"
"Carte SD[flshAir]" "Carte SD [flashAir]"
# #
"Right" "Right"
@ -1044,7 +1044,7 @@
#MSG_FORCE_SELFTEST c=20 r=8 #MSG_FORCE_SELFTEST c=20 r=8
"Selftest will be run to calibrate accurate sensorless rehoming." "Selftest will be run to calibrate accurate sensorless rehoming."
"L'auto-test sera lance pour calibrer la remise a zero precise sans capteur." "Le Selftest sera lance pour calibrer la remise a zero precise sans capteur"
# #
"Select nozzle preheat temperature which matches your material." "Select nozzle preheat temperature which matches your material."
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Etat capteur"
# #
"Sensors info" "Sensors info"
"\x00" "Infos capteurs"
# #
"Show pinda state" "Show pinda state"
@ -1096,7 +1096,7 @@
#MSG_SORT_ALPHA c=17 r=1 #MSG_SORT_ALPHA c=17 r=1
"Sort: [alphabet]" "Sort: [alphabet]"
"Tri : [alphabet]" "Tri : [alphabet]"
#MSG_SORTING c=20 r=1 #MSG_SORTING c=20 r=1
"Sorting files" "Sorting files"
@ -1104,7 +1104,7 @@
#MSG_SOUND_LOUD c=17 r=1 #MSG_SOUND_LOUD c=17 r=1
"Sound [loud]" "Sound [loud]"
"Son [fort]" "Son [fort]"
# #
"Slight skew" "Slight skew"
@ -1112,7 +1112,7 @@
#MSG_SOUND_MUTE c=17 r=1 #MSG_SOUND_MUTE c=17 r=1
"Sound [mute]" "Sound [mute]"
"Son [muet]" "Son [muet]"
# #
"Some problem encountered, Z-leveling enforced ..." "Some problem encountered, Z-leveling enforced ..."
@ -1120,11 +1120,11 @@
#MSG_SOUND_ONCE c=17 r=1 #MSG_SOUND_ONCE c=17 r=1
"Sound [once]" "Sound [once]"
"Son [une fois]" "Son [une fois]"
#MSG_SOUND_SILENT c=17 r=1 #MSG_SOUND_SILENT c=17 r=1
"Sound [silent]" "Sound [silent]"
"Son [silencieux]" "Son [silencieux]"
#MSG_SPEED c=0 r=0 #MSG_SPEED c=0 r=0
"Speed" "Speed"
@ -1136,7 +1136,7 @@
#MSG_TEMP_CAL_WARNING c=20 r=4 #MSG_TEMP_CAL_WARNING c=20 r=4
"Stable ambient temperature 21-26C is needed a rigid stand is required." "Stable ambient temperature 21-26C is needed a rigid stand is required."
"Une temperature ambiante stable de 21-26C et une base stable sont requis." "Une temperature ambiante stable de 21-26C et un support stable sont requis."
#MSG_STATISTICS c=0 r=0 #MSG_STATISTICS c=0 r=0
"Statistics " "Statistics "
@ -1176,11 +1176,11 @@
#MSG_TEMP_CAL_FAILED c=20 r=8 #MSG_TEMP_CAL_FAILED c=20 r=8
"Temperature calibration failed" "Temperature calibration failed"
"Echec calibration en temperature" "Echec de la calibration en temperature"
#MSG_TEMP_CALIBRATION_DONE c=20 r=12 #MSG_TEMP_CALIBRATION_DONE c=20 r=12
"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal." "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
"La calibration en temperature est terminee et active. La calibration en temperature peut etre desactivee dans le menu Reglages->Cal. Temp." "La calibration en temperature est terminee et activee. La calibration en temperature peut etre desactivee dans le menu Reglages-> Cal. Temp."
#MSG_TEMPERATURE c=0 r=0 #MSG_TEMPERATURE c=0 r=0
"Temperature" "Temperature"
@ -1200,7 +1200,7 @@
# #
"Total print time" "Total print time"
"Temps total" "Temps total impr."
#MSG_TUNE c=0 r=0 #MSG_TUNE c=0 r=0
"Tune" "Tune"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"Echecs au total" "Total des echecs"
# #
"to load filament" "to load filament"
"\x00" "pour charger le fil."
# #
"to unload filament" "to unload filament"
"\x00" "pour decharger fil."
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1236,7 +1236,7 @@
# #
"Total" "Total"
"Total" "\x00"
#MSG_USED c=19 r=1 #MSG_USED c=19 r=1
"Used during print" "Used during print"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "inconnu"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1256,7 +1256,7 @@
#MSG_WAITING_TEMP c=20 r=3 #MSG_WAITING_TEMP c=20 r=3
"Waiting for nozzle and bed cooling" "Waiting for nozzle and bed cooling"
"Attente du refroidissement de la buse et du lit" "Attente du refroidissement des buse et plateau"
#MSG_WAITING_TEMP_PINDA c=20 r=3 #MSG_WAITING_TEMP_PINDA c=20 r=3
"Waiting for PINDA probe cooling" "Waiting for PINDA probe cooling"
@ -1304,7 +1304,7 @@
#MSG_WIZARD_QUIT c=20 r=8 #MSG_WIZARD_QUIT c=20 r=8
"You can always resume the Wizard from Calibration -> Wizard." "You can always resume the Wizard from Calibration -> Wizard."
"Vous pouvez toujours poursuivre l'assistant dans Calibration-> Assistant." "Vous pouvez toujours relancer l'assistant dans Calibration-> Assistant."
#MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
"XYZ calibration all right. Skew will be corrected automatically." "XYZ calibration all right. Skew will be corrected automatically."
@ -1328,11 +1328,11 @@
#MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
"XYZ calibration compromised. Right front calibration point not reachable." "XYZ calibration compromised. Right front calibration point not reachable."
"Calibration XYZ compromise. Le point de calibration avant droite n'est pas atteignable." "Calibration XYZ compromise. Le point de calibration avant droit n'est pas atteignable."
#MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
"XYZ calibration compromised. Left front calibration point not reachable." "XYZ calibration compromised. Left front calibration point not reachable."
"Calibration XYZ compromise. Le point de calibration avant gauche n'est pas atteignable." "Calibration XYZ compromise. Le point de calibration avant gauche n'est pas atteignable."
#MSG_LOAD_ALL c=17 r=0 #MSG_LOAD_ALL c=17 r=0
"Load all" "Load all"
@ -1344,7 +1344,7 @@
# #
"XYZ calibration failed. Bed calibration point was not found." "XYZ calibration failed. Bed calibration point was not found."
"Echec calibration XYZ. Le point de calibration du lit n'a pas ete trouve." "Echec calibration XYZ. Le point de calibration du plateau n'a pas ete trouve."
# #
"XYZ calibration failed. Front calibration points not reachable." "XYZ calibration failed. Front calibration points not reachable."
@ -1360,7 +1360,7 @@
# #
"XYZ calibration failed. Right front calibration point not reachable." "XYZ calibration failed. Right front calibration point not reachable."
"Echec calibration XYZ. Le point de calibration avant droite n'est pas atteignable." "Echec calibration XYZ. Le point de calibration avant droit n'est pas atteignable."
#MSG_LOAD_FILAMENT_3 c=17 r=0 #MSG_LOAD_FILAMENT_3 c=17 r=0
"Load filament 3" "Load filament 3"

62
lang/lang_en_it.txt
View file

@ -20,7 +20,7 @@
# #
">Cancel" ">Cancel"
"\x00" ">Annulla"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -36,7 +36,7 @@
# #
"Ambient" "Ambient"
"\x00" "Ambiente"
#MSG_PRESS c=20 r=0 #MSG_PRESS c=20 r=0
"and press the knob" "and press the knob"
@ -48,15 +48,15 @@
#MSG_AUTO_DEPLETE_ON c=17 r=1 #MSG_AUTO_DEPLETE_ON c=17 r=1
"SpoolJoin [on]" "SpoolJoin [on]"
"SpoolJoin [on]" "\x00"
# #
"SpoolJoin [N/A]" "SpoolJoin [N/A]"
"SpoolJoin [N/A]" "\x00"
# MSG_AUTO_DEPLETE_OFF c=17 r=1 # MSG_AUTO_DEPLETE_OFF c=17 r=1
"SpoolJoin [off]" "SpoolJoin [off]"
"SpoolJoin [off]" "\x00"
#MSG_AUTO_HOME c=0 r=0 #MSG_AUTO_HOME c=0 r=0
"Auto home" "Auto home"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Calibrazione Home"
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -204,7 +204,7 @@
# #
"Crash" "Crash"
"\x00" "Impatto"
#MSG_CURRENT c=19 r=1 #MSG_CURRENT c=19 r=1
"Current" "Current"
@ -320,7 +320,7 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "Statistiche fallimenti MMU"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
@ -336,7 +336,7 @@
# #
"Fail stats" "Fail stats"
"\x00" "Statistiche fallimenti"
#MSG_FAN_SPEED c=14 r=0 #MSG_FAN_SPEED c=14 r=0
"Fan speed" "Fan speed"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"\x00" "Filam. esauriti"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"\x00" "Fallimenti ultima stampa"
# #
"Last print" "Last print"
"\x00" "Ultima stampa"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "Fallimenti MMU"
# #
"MMU load failed " "MMU load failed "
"\x00" "Caricamento MMU fallito"
# #
"MMU load fails" "MMU load fails"
"\x00" "Caricamenti MMU falliti"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -688,7 +688,7 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "Mancanza corrente MMU"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -704,7 +704,7 @@
# #
"MMU2 connected" "MMU2 connected"
"\x00" "MMU2 connessa"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -780,7 +780,7 @@
# #
"Nozzle FAN" "Nozzle FAN"
"\x00" "Ventola estrusore"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"\x00" "Mancanza corrente"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Preriscaldamento per caricare"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Preriscaldamento per scaricare"
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "Premere la manopola"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -936,7 +936,7 @@
# #
"Print FAN" "Print FAN"
"\x00" "Ventola di stampa"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Stato sensore"
# #
"Sensors info" "Sensors info"
"\x00" "Info Sensori"
# #
"Show pinda state" "Show pinda state"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"\x00" "Totale fallimenti"
# #
"to load filament" "to load filament"
"\x00" "per caricare il filamento"
# #
"to unload filament" "to unload filament"
"\x00" "per scaricare il filamento"
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1236,7 +1236,7 @@
# #
"Total" "Total"
"\x00" "Totale"
#MSG_USED c=19 r=1 #MSG_USED c=19 r=1
"Used during print" "Used during print"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "sconosciuto"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1384,4 +1384,4 @@
#MSG_OFF c=0 r=0 #MSG_OFF c=0 r=0
" [off]" " [off]"
" [OFF]" "\x00"

60
lang/lang_en_pl.txt
View file

@ -20,7 +20,7 @@
# #
">Cancel" ">Cancel"
"\x00" ">Anuluj"
#MSG_BABYSTEPPING_Z c=20 r=0 #MSG_BABYSTEPPING_Z c=20 r=0
"Adjusting Z" "Adjusting Z"
@ -36,7 +36,7 @@
# #
"Ambient" "Ambient"
"\x00" "Otoczenie"
#MSG_PRESS c=20 r=0 #MSG_PRESS c=20 r=0
"and press the knob" "and press the knob"
@ -124,7 +124,7 @@
# #
"Calibrating home" "Calibrating home"
"\x00" "Zerowanie osi"
#MSG_CALIBRATE_BED c=0 r=0 #MSG_CALIBRATE_BED c=0 r=0
"Calibrate XYZ" "Calibrate XYZ"
@ -204,7 +204,7 @@
# #
"Crash" "Crash"
"\x00" "Zderzenie"
#MSG_CURRENT c=19 r=1 #MSG_CURRENT c=19 r=1
"Current" "Current"
@ -320,7 +320,7 @@
# #
"Fail stats MMU" "Fail stats MMU"
"\x00" "Bledy MMU"
#MSG_FSENS_AUTOLOAD_ON c=17 r=1 #MSG_FSENS_AUTOLOAD_ON c=17 r=1
"F. autoload [on]" "F. autoload [on]"
@ -336,7 +336,7 @@
# #
"Fail stats" "Fail stats"
"\x00" "Statystyki bledow"
#MSG_FAN_SPEED c=14 r=0 #MSG_FAN_SPEED c=14 r=0
"Fan speed" "Fan speed"
@ -372,7 +372,7 @@
# #
"Filam. runouts" "Filam. runouts"
"\x00" "Konc. filamentu"
#MSG_FILAMENT_CLEAN c=20 r=2 #MSG_FILAMENT_CLEAN c=20 r=2
"Filament extruding & with correct color?" "Filament extruding & with correct color?"
@ -584,11 +584,11 @@
# #
"Last print failures" "Last print failures"
"\x00" "Ostatnie bledy druku"
# #
"Last print" "Last print"
"\x00" "Ost. wydruk"
#MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
"Left hotend fan?" "Left hotend fan?"
@ -660,15 +660,15 @@
# #
"MMU fails" "MMU fails"
"\x00" "Bledy MMU"
# #
"MMU load failed " "MMU load failed "
"\x00" "Blad ladowania MMU"
# #
"MMU load fails" "MMU load fails"
"\x00" "Bledy ladow. MMU"
#MSG_MMU_OK_RESUMING c=20 r=4 #MSG_MMU_OK_RESUMING c=20 r=4
"MMU OK. Resuming..." "MMU OK. Resuming..."
@ -688,7 +688,7 @@
# #
"MMU power fails" "MMU power fails"
"\x00" "Zaniki zasil. MMU"
#MSG_STEALTH_MODE_ON c=0 r=0 #MSG_STEALTH_MODE_ON c=0 r=0
"Mode [Stealth]" "Mode [Stealth]"
@ -704,7 +704,7 @@
# #
"MMU2 connected" "MMU2 connected"
"\x00" "MMU podlaczone"
#MSG_SELFTEST_MOTOR c=0 r=0 #MSG_SELFTEST_MOTOR c=0 r=0
"Motor" "Motor"
@ -736,7 +736,7 @@
# #
"N/A" "N/A"
"\x00" "N/D"
#MSG_NO c=0 r=0 #MSG_NO c=0 r=0
"No" "No"
@ -780,7 +780,7 @@
# #
"Nozzle FAN" "Nozzle FAN"
"\x00" "Went. hotendu"
#MSG_PAUSE_PRINT c=0 r=0 #MSG_PAUSE_PRINT c=0 r=0
"Pause print" "Pause print"
@ -896,7 +896,7 @@
# #
"Power failures" "Power failures"
"\x00" "Zaniki zasilania"
#MSG_PRINT_ABORTED c=20 r=0 #MSG_PRINT_ABORTED c=20 r=0
"Print aborted" "Print aborted"
@ -904,11 +904,11 @@
# #
"Preheating to load" "Preheating to load"
"\x00" "Nagrzew. do ladowania"
# #
"Preheating to unload" "Preheating to unload"
"\x00" "Nagrzew. do rozlad."
#MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 #MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0
"Print fan:" "Print fan:"
@ -920,7 +920,7 @@
# #
"Press the knob" "Press the knob"
"\x00" "Wcisnij pokretlo"
#MSG_PRINT_PAUSED c=20 r=1 #MSG_PRINT_PAUSED c=20 r=1
"Print paused" "Print paused"
@ -936,7 +936,7 @@
# #
"Print FAN" "Print FAN"
"\x00" "Went. wydruku"
#WELCOME_MSG c=20 r=0 #WELCOME_MSG c=20 r=0
"Prusa i3 MK2.5 ready." "Prusa i3 MK2.5 ready."
@ -964,7 +964,7 @@
# #
"Prusa i3 MK3S OK." "Prusa i3 MK3S OK."
"\x00" "Prusa i3 MK3S OK"
# #
"Prusa i3 MK2 ready." "Prusa i3 MK2 ready."
@ -1068,11 +1068,11 @@
# #
"Sensor state" "Sensor state"
"\x00" "Stan czujnikow"
# #
"Sensors info" "Sensors info"
"\x00" "Info o czujnikach"
# #
"Show pinda state" "Show pinda state"
@ -1216,15 +1216,15 @@
# #
"Total failures" "Total failures"
"\x00" "Suma bledow"
# #
"to load filament" "to load filament"
"\x00" "aby zaladow. fil."
# #
"to unload filament" "to unload filament"
"\x00" "aby rozlad. filament"
#MSG_UNLOAD_FILAMENT c=17 r=0 #MSG_UNLOAD_FILAMENT c=17 r=0
"Unload filament" "Unload filament"
@ -1236,7 +1236,7 @@
# #
"Total" "Total"
"\x00" "Suma"
#MSG_USED c=19 r=1 #MSG_USED c=19 r=1
"Used during print" "Used during print"
@ -1248,7 +1248,7 @@
# #
"unknown" "unknown"
"\x00" "nieznane"
#MSG_USERWAIT c=0 r=0 #MSG_USERWAIT c=0 r=0
"Wait for user..." "Wait for user..."
@ -1384,4 +1384,4 @@
#MSG_OFF c=0 r=0 #MSG_OFF c=0 r=0
" [off]" " [off]"
" [wyl]" "\x00"