Build firmware under Windows 10 64-bit ...
using Linux subsystem Ubuntu or git-bash
This commit is contained in:
3d-gussner
parent
6bb892cad9
commit
d0e3e9d2e2
49
README.md
49
README.md
@ -16,6 +16,55 @@ If you wish to flash from Arduino, follow step [2.c](#2c) from Windows build fir
|
||||
|
||||
The script downloads Arduino with our modifications and Rambo board support installed, unpacks it into folder PF-build-env-\<version\> on the same level, as your Prusa-Firmware folder is located, builds firmware for MK3 using that Arduino in Prusa-Firmware-build folder on the same level as Prusa-Firmware, runs secondary language support scripts. Firmware with secondary language support is generated in lang subfolder. Use firmware.hex for MK3 variant. Use firmware_\<lang\>.hex for other printers. Don't forget to follow step [2.b](#2b) first for non-MK3 printers.
|
||||
## Windows
|
||||
### If you want to use the automated `build.sh` you gonna need to install on you Windows a Linux subsystem or Git-bash
|
||||
|
||||
###Steps for Linux subsystem und Windows 10 64-bit:
|
||||
- follow the Microsoft guide https://docs.microsoft.com/en-us/windows/wsl/install-win10
|
||||
You can also use the 'prepare_winbuild.ps1' powershell script with Administrator rights
|
||||
- Tested versions are at this moment
|
||||
- Ubuntu other may different
|
||||
- After the installation and reboot please open your Ubuntu bash and do following steps
|
||||
- run command `apt-get update`
|
||||
- to install zip run `apt-get install zip`
|
||||
- add few lines at the top of `~/.bashrc` by running `sudo nano ~/.bashrc`
|
||||
|
||||
export OS="Linux"
|
||||
export JAVA_TOOL_OPTIONS="-Djava.net.preferIPv4Stack=true"
|
||||
export GPG_TTY=$(tty)
|
||||
|
||||
use `CRTL-X` to close nano and confirm to write the new entries
|
||||
- restart Ubuntu bash
|
||||
Now your Ubuntu subsystem is ready to use the automatic `build.sh` script and compile your firmware correctly
|
||||
|
||||
####Some Tips for Ubuntu
|
||||
- Linux is case sensetive so please don't forget to use capital letters where needed, like changing to a directory
|
||||
- To change the path to your Prusa-Firmware location you downloaded and unzipped
|
||||
- Example: You files are under `C:\Users\<your-username>\Downloads\Prusa-Firmware-MK3`
|
||||
- use under Ubuntu the following command `cd /mnt/c/Users/<your-username>/Downloads/Prusa-Firmware-MK3`
|
||||
to change to the right folder
|
||||
|
||||
####Compile Prusa-firmware with Ubuntu Linux subsystem installed
|
||||
- open Ubuntu bash
|
||||
- change to your source code folder (case sensitive)
|
||||
- run `./build.sh`
|
||||
- follow the instructions
|
||||
|
||||
###Steps for Git-bash under Windows 10 64-bit:
|
||||
- Download and install the 64bit Git version https://git-scm.com/download/win
|
||||
- Also follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058
|
||||
- Download and install 7z-zip from its official website https://www.7-zip.org/
|
||||
By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10
|
||||
- Run `Git-Bash` under Administrator privilege
|
||||
- navigate to the directory /c/Program Files/Git/mingw64/bin
|
||||
- run `ln -s /c/Program Files/7-Zip/7z.exe zip.exe`
|
||||
|
||||
####Compile Prusa-firmware with Git-bash installed
|
||||
- open Git-bash
|
||||
- change to your source code folder
|
||||
- run `bash build.sh`
|
||||
- follow the instructions
|
||||
|
||||
|
||||
### 1. Development environment preparation
|
||||
|
||||
a. install `"Arduino Software IDE"` for your preferred operating system
|
||||
|
||||
496
build.sh
496
build.sh
@ -1,40 +1,500 @@
|
||||
#!/bin/bash
|
||||
# This bash script is used to compile automatically the Prusa firmware with a dedecated build enviroment and settings
|
||||
#
|
||||
# Supported OS: Windows 10, Linux64 bit
|
||||
#
|
||||
# Linux:
|
||||
#
|
||||
# Windows:
|
||||
# To excecute this sciprt you gonna need few things on your Windows machine
|
||||
#
|
||||
# Linux Subsystem Ubuntu
|
||||
# 1. Follow these instructions
|
||||
# 2. Open Ubuntu bash and get latest updates with 'apt-get upgate'
|
||||
# 3. Install zip with 'apt-get install zip'
|
||||
# 4. Add at top of ~/.bashrc following lines by using 'sudo nano ~/.bashrc'
|
||||
#
|
||||
# export OS="Linux"
|
||||
# export JAVA_TOOL_OPTIONS="-Djava.net.preferIPv4Stack=true"
|
||||
# export GPG_TTY=$(tty)
|
||||
#
|
||||
# and confirm them. Restart Ubuntu bash
|
||||
#
|
||||
# Or GIT-BASH
|
||||
# 1. Download and install the correct (64bit or 32bit) Git version https://git-scm.com/download/win
|
||||
# 2. Also follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058
|
||||
# 3. Download and install 7z-zip from its official website.
|
||||
# By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case.
|
||||
# 4. Run git Bash under Administrator privilege and navigate to the directory /c/Program Files/Git/mingw64/bin,
|
||||
# you can run the command ln -s /c/Program Files/7-Zip/7z.exe zip.exe
|
||||
#
|
||||
# Usefull things to edit and compare your custom Firmware
|
||||
# 1. Download and install current and correct (64bit or 32bit) Notepad++ version https://notepad-plus-plus.org/download
|
||||
# 2. Another great tool to compare your custom mod and stock firmware is WinMerge http://winmerge.org/downloads/?lang=en
|
||||
#
|
||||
# Example for MK3: open git bash and chage to your Firmware directory
|
||||
# <username>@<machinename> MINGW64 /<drive>/path
|
||||
# bash build.sh 1_75mm_MK3-EINSy10a-E3Dv6full
|
||||
#
|
||||
# Example for MK25: open git bash and chage to your directory
|
||||
# gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware/MK3
|
||||
# bash build.sh 1_75mm_MK25-RAMBo13a-E3Dv6full
|
||||
#
|
||||
# The compiled hex files can be found in the folder above like from the example
|
||||
# gussner@WIN01 MINGW64 /d/Data/Prusa-Firmware
|
||||
# FW351-Build1778-1_75mm_MK25-RAMBo13a-E3Dv6full.hex
|
||||
#
|
||||
# Version: 1.0.1-Build_8
|
||||
# Change log:
|
||||
# 12 Jan 2019, 3d-gussner, Fixed "compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections" in 'platform.txt'
|
||||
# 16 Jan 2019, 3d-gussner, Build_2, Added development check to modify 'Configuration.h' to prevent unwanted LCD messages that Firmware is uknown
|
||||
# 17 Jan 2019, 3d-gussner, Build_3, Check for OS Windows or Linux and use the right build enviroment
|
||||
# 10 Feb 2019, ropaha, Pull Request, Select variant from list while using build.sh
|
||||
# 10 Feb 2019, ropaha, change FW_DEV_VERSION automatically depending on FW_VERSION RC/BETA/ALPHA
|
||||
# 10 Feb 2019, 3d-gussner, 1st tests with english only
|
||||
# 10 Feb 2019, ropaha, added compiling of all variants and english only
|
||||
# 10 Feb 2019, 3d-gussner, Set OUTPUT_FOLDER for hex files
|
||||
# 11 Feb 2019, 3d-gussner/ropaha, Minor changes and fixes
|
||||
# 11 Feb 2019, 3d-gussner, Ready for RC
|
||||
# 12 Feb 2019, 3d-gussner, Check if wget and zip are installed. Thanks to Bernd to point it out
|
||||
# 12 Feb 2019, 3d-gussner, Changed OS check to OSTYPE as it is not supported on Ubuntu
|
||||
# Also added different BUILD_ENV folders depending on OS used so Windows
|
||||
# Users can use git-bash AND Windows Linux Subsystems at the same time
|
||||
# Cleanup compiler flags is only depends on OS version.
|
||||
# 12 Feb 2019, 3d-gussner, Added additional OSTYPE check
|
||||
# 15 feb 2019, 3d-gussner, Added zip files for miniRAMbo multi language hex files
|
||||
# 15 Feb 2019, 3d-gussner, Added more checks if
|
||||
# Compiled Hex-files
|
||||
# Configuration_prusa.h
|
||||
# language build files
|
||||
# multi language firmware files exist and clean them up
|
||||
# 15 Feb 2019, 3d-gussner, Fixed selction GOLD/UNKNOWN DEV_STATUS for ALL variants builds, so you have to choose only once
|
||||
# 15 Feb 2019, 3d-gussner, Added some colored output
|
||||
# 15 Feb 2019, 3d-gussner, troubleshooting and minor fixes
|
||||
|
||||
|
||||
|
||||
###Check if OSTYPE is supported
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
if [ $(uname -m) == "x86_64" ]; then
|
||||
echo "$(tput setaf 2)Windows 64-bit found$(tput sgr0)"
|
||||
fi
|
||||
elif [ $OSTYPE == "linux-gnu" ]; then
|
||||
if [ $(uname -m) == "x86_64" ]; then
|
||||
echo "$(tput setaf 2)Linux 64-bit found$(tput sgr0)"
|
||||
fi
|
||||
else
|
||||
echo "$(tput setaf 1)This script doesn't support your Operating system!"
|
||||
echo "Please use Linux 64-bit or Windows 10 64-bit with Linux subsystem / git-bash"
|
||||
echo "Read the notes of build.sh$(tput sgr0)"
|
||||
exit
|
||||
fi
|
||||
sleep 2
|
||||
###Prepare bash enviroment and check if wget and zip are availible
|
||||
if ! type wget > /dev/null; then
|
||||
echo "$(tput setaf 1)Missing 'wget' which is important to run this script"
|
||||
echo "Please follow these instructions https://gist.github.com/evanwill/0207876c3243bbb6863e65ec5dc3f058 to install wget$(tput sgr0)"
|
||||
exit
|
||||
fi
|
||||
if ! type zip > /dev/null; then
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
|
||||
echo "Download and install 7z-zip from its official website https://www.7-zip.org/"
|
||||
echo "By default, it is installed under the directory /c/Program Files/7-Zip in Windows 10 as my case."
|
||||
echo "Run git Bash under Administrator privilege and"
|
||||
echo "navigate to the directory /c/Program Files/Git/mingw64/bin,"
|
||||
echo "you can run the command $(tput setaf 2)ln -s /c/Program Files/7-Zip/7z.exe zip.exe$(tput sgr0)"
|
||||
exit
|
||||
elif [ $OSTYPE == "linux-gnu" ]; then
|
||||
echo "$(tput setaf 1)Missing 'zip' which is important to run this script"
|
||||
echo "install it with the command $(tput setaf 2)'sudo apt-get install zip'$(tput sgr0)"
|
||||
exit
|
||||
fi
|
||||
fi
|
||||
###End prepare bash enviroment
|
||||
|
||||
BUILD_ENV="1.0.1"
|
||||
SCRIPT_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
|
||||
|
||||
if [ ! -d "build-env" ]; then
|
||||
mkdir build-env || exit 1
|
||||
fi
|
||||
cd build-env || exit 2
|
||||
# List few useful data
|
||||
echo
|
||||
echo "Script path:" $SCRIPT_PATH
|
||||
echo "OS :" $OS
|
||||
echo "OS type :" $OSTYPE
|
||||
echo ""
|
||||
|
||||
if [ ! -f "PF-build-env-Linux64-$BUILD_ENV.zip" ]; then
|
||||
wget https://github.com/mkbel/PF-build-env/releases/download/$BUILD_ENV/PF-build-env-Linux64-$BUILD_ENV.zip || exit 3
|
||||
#### Start prepare building
|
||||
|
||||
#Check if build exists and creates it if not
|
||||
if [ ! -d "../build-env" ]; then
|
||||
mkdir ../build-env || exit 2
|
||||
fi
|
||||
|
||||
if [ ! -d "../../PF-build-env-$BUILD_ENV" ]; then
|
||||
unzip -q PF-build-env-Linux64-$BUILD_ENV.zip -d ../../PF-build-env-$BUILD_ENV || exit 4
|
||||
cd ../build-env || exit 3
|
||||
|
||||
# Check if PF-build-env-<version> exists and downloads + creates it if not
|
||||
# The build enviroment is based on the Arduino IDE 1.8.5 portal vesion with some changes
|
||||
if [ ! -d "../PF-build-env-$BUILD_ENV" ]; then
|
||||
echo "$(tput setaf 6)PF-build-env-$BUILD_ENV is missing ... creating it now for you$(tput sgr 0)"
|
||||
mkdir ../PF-build-env-$BUILD_ENV
|
||||
sleep 5
|
||||
fi
|
||||
|
||||
cd ../../PF-build-env-$BUILD_ENV || exit 5
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
if [ ! -f "PF-build-env-Win-$BUILD_ENV.zip" ]; then
|
||||
echo "$(tput setaf 6)Downloding Windows build enviroment...$(tput setaf 2)"
|
||||
sleep 2
|
||||
wget https://github.com/3d-gussner/PF-build-env/releases/download/Win-$BUILD_ENV/PF-build-env-Win-$BUILD_ENV.zip || exit 4
|
||||
#cp -f ../../PF-build-env/PF-build-env-Win-$BUILD_ENV.zip PF-build-env-Win-$BUILD_ENV.zip || exit4
|
||||
echo "$(tput sgr 0)"
|
||||
fi
|
||||
if [ ! -d "../PF-build-env-$BUILD_ENV/$OSTYPE" ]; then
|
||||
echo "$(tput setaf 6)Unzipping Windows build enviroment...$(tput setaf 2)"
|
||||
sleep 2
|
||||
unzip PF-build-env-Win-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$OSTYPE || exit 4
|
||||
echo "$(tput sgr0)"
|
||||
fi
|
||||
|
||||
fi
|
||||
|
||||
if [ $OSTYPE == "linux-gnu" ]; then
|
||||
if [ ! -f "PF-build-env-Linux64-$BUILD_ENV.zip" ]; then
|
||||
echo "$(tput setaf 6)Downloading Linux 64 build enviroment...$(tput setaf 2)"
|
||||
sleep 2
|
||||
wget https://github.com/mkbel/PF-build-env/releases/download/$BUILD_ENV/PF-build-env-Linux64-$BUILD_ENV.zip || exit 3
|
||||
echo "$(tput sgr0)"
|
||||
fi
|
||||
|
||||
if [ ! -d "../PF-build-env-$BUILD_ENV/$OSTYPE" ]; then
|
||||
echo "$(tput setaf 6)Unzipping Linux build enviroment...$(tput setaf 2)"
|
||||
sleep 2
|
||||
unzip PF-build-env-Linux64-$BUILD_ENV.zip -d ../PF-build-env-$BUILD_ENV/$OSTYPE || exit 4
|
||||
echo "$(tput sgr0)"
|
||||
fi
|
||||
fi
|
||||
cd $SCRIPT_PATH
|
||||
|
||||
# First argument defines which varaint of the Prusa Firmware will be compiled
|
||||
if [ -z "$1" ] ; then
|
||||
# Select which varaint of the Prusa Firmware will be compiled, like
|
||||
PS3="Select a variant: "
|
||||
while IFS= read -r -d $'\0' f; do
|
||||
options[i++]="$f"
|
||||
done < <(find Firmware/variants/ -maxdepth 1 -type f -name "*.h" -print0 )
|
||||
select opt in "${options[@]}" "All" "Quit"; do
|
||||
case $opt in
|
||||
*.h)
|
||||
VARIANT=$(basename "$opt" ".h")
|
||||
VARIANTS[i++]="$opt"
|
||||
break
|
||||
;;
|
||||
"All")
|
||||
VARIANT="All"
|
||||
VARIANTS=${options[*]}
|
||||
break
|
||||
;;
|
||||
"Quit")
|
||||
echo "You chose to stop"
|
||||
exit 1
|
||||
;;
|
||||
*)
|
||||
echo "$(tput setaf 1)This is not a valid variant$(tput sgr0)"
|
||||
;;
|
||||
esac
|
||||
done
|
||||
else
|
||||
VARIANT=$1
|
||||
fi
|
||||
|
||||
#Second argument defines if it is an english only version. Known values EN_ONLY / ALL
|
||||
#Check default language mode
|
||||
MULTI_LANGUAGE_CHECK=$(grep --max-count=1 "^#define LANG_MODE *" $SCRIPT_PATH/Firmware/config.h|sed -e's/ */ /g'|cut -d ' ' -f3)
|
||||
|
||||
if [ -z "$2" ] ; then
|
||||
PS3="Select a language: "
|
||||
echo
|
||||
echo "Which lang-build do you want?"
|
||||
select yn in "Multi languages" "English only"; do
|
||||
case $yn in
|
||||
"Multi languages")
|
||||
LANGUAGES="ALL"
|
||||
sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE 1/g" $SCRIPT_PATH/Firmware/config.h
|
||||
break
|
||||
;;
|
||||
"English only")
|
||||
LANGUAGES="EN_ONLY"
|
||||
sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE 0/g" $SCRIPT_PATH/Firmware/config.h
|
||||
break
|
||||
;;
|
||||
*)
|
||||
echo "$(tput setaf 1)This is not a valid language$(tput sgr0)"
|
||||
;;
|
||||
esac
|
||||
done
|
||||
else
|
||||
LANGUAGES=$2
|
||||
fi
|
||||
|
||||
#Set BUILD_ENV_PATH
|
||||
cd ../PF-build-env-$BUILD_ENV/$OSTYPE || exit 5
|
||||
BUILD_ENV_PATH="$( pwd -P )"
|
||||
|
||||
cd ..
|
||||
cd ../..
|
||||
|
||||
#Checkif BUILD_PATH exisits and if not creates it
|
||||
if [ ! -d "Prusa-Firmware-build" ]; then
|
||||
mkdir Prusa-Firmware-build || exit 6
|
||||
fi
|
||||
|
||||
#Set the BUILD_PATH for Arduino IDE
|
||||
cd Prusa-Firmware-build || exit 7
|
||||
BUILD_PATH="$( pwd -P )"
|
||||
|
||||
if [ ! -f "$SCRIPT_PATH/Firmware/Configuration_prusa.h" ]; then
|
||||
cp $SCRIPT_PATH/Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 8
|
||||
fi
|
||||
for v in ${VARIANTS[*]}
|
||||
do
|
||||
VARIANT=$(basename "$v" ".h")
|
||||
# Find firmware version in Configuration.h file and use it to generate the hex filename
|
||||
FW=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g')
|
||||
# Find build version in Configuration.h file and use it to generate the hex filename
|
||||
BUILD=$(grep --max-count=1 "\bFW_COMMIT_NR\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d ' ' -f3)
|
||||
# Check if the motherboard is an EINSY and if so the only one hex file will generated
|
||||
MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
|
||||
# Check development status
|
||||
DEV_CHECK=$(grep --max-count=1 "\bFW_VERSION\b" $SCRIPT_PATH/Firmware/Configuration.h | sed -e's/ */ /g'|cut -d '"' -f2|sed 's/\.//g'|cut -d '-' -f2)
|
||||
if [ -z "$DEV_STATUS_SELECTED" ] ; then
|
||||
if [[ "$DEV_CHECK" == "RC1" || "$DEV_CHECK" == "RC2" ]] ; then
|
||||
DEV_STATUS="RC"
|
||||
elif [[ "$DEV_CHECK" == "ALPHA" ]]; then
|
||||
DEV_STATUS="ALPHA"
|
||||
elif [[ "$DEV_CHECK" == "BETA" ]]; then
|
||||
DEV_STATUS="BETA"
|
||||
elif [[ "$DEV_CHECK" == "DEVEL" ]]; then
|
||||
DEV_STATUS="DEVEL"
|
||||
elif [[ "$DEV_CHECK" == "DEBUG" ]]; then
|
||||
DEV_STATUS="DEBUG"
|
||||
else
|
||||
DEV_STATUS="UNKNOWN"
|
||||
echo
|
||||
echo "$(tput setaf 5)DEV_STATUS is UNKNOWN. Do you wish to set DEV_STATUS to GOLD?$(tput sgr0)"
|
||||
PS3="Select YES only if source code is tested and trusted: "
|
||||
select yn in "Yes" "No"; do
|
||||
case $yn in
|
||||
Yes)
|
||||
DEV_STATUS="GOLD"
|
||||
DEV_STATUS_SELECTED="GOLD"
|
||||
break
|
||||
;;
|
||||
No)
|
||||
DEV_STATUS="UNKNOWN"
|
||||
DEV_STATUS_SELECTED="UNKNOWN"
|
||||
break
|
||||
;;
|
||||
*)
|
||||
echo "$(tput setaf 1)This is not a valid DEV_STATUS$(tput sgr0)"
|
||||
;;
|
||||
esac
|
||||
done
|
||||
fi
|
||||
else
|
||||
DEV_STATUS=$DEV_STATUS_SELECTED
|
||||
fi
|
||||
#Prepare hex files folders
|
||||
if [ ! -d "$SCRIPT_PATH/../Hex-files/FW$FW-Build$BUILD/$MOTHERBOARD" ]; then
|
||||
mkdir -p $SCRIPT_PATH/../Hex-files/FW$FW-Build$BUILD/$MOTHERBOARD || exit 10
|
||||
fi
|
||||
OUTPUT_FOLDER="Hex-files/FW$FW-Build$BUILD/$MOTHERBOARD"
|
||||
|
||||
$BUILD_ENV_PATH/arduino $SCRIPT_PATH/Firmware/Firmware.ino --verify --board rambo:avr:rambo --pref build.path=$BUILD_PATH || exit 9
|
||||
#Check if exacly the same hexfile already exsits
|
||||
if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex" && "$LANGUAGES" == "ALL" ]]; then
|
||||
echo ""
|
||||
ls $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex
|
||||
echo "$(tput setaf 6)This hex file to be comiled already exsits! To cancle this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
elif [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex" && "$LANGUAGES" == "EN_ONLY" ]]; then
|
||||
echo ""
|
||||
ls $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex
|
||||
echo "$(tput setaf 6)This hex file to be comiled already exsits! To cancle this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
fi
|
||||
if [[ -f "$SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip" && "$LANGUAGES" == "ALL" ]]; then
|
||||
echo ""
|
||||
ls $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip
|
||||
echo "$(tput setaf 6)This zip file to be comiled already exsits! To cancle this process press CRTL+C and rename existing hex file.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
fi
|
||||
|
||||
export ARDUINO=$BUILD_ENV_PATH
|
||||
#List some useful data
|
||||
echo "$(tput setaf 2)$(tput setab 7) "
|
||||
echo "Variant :" $VARIANT
|
||||
echo "Firmware :" $FW
|
||||
echo "Build # :" $BUILD
|
||||
echo "Dev Check :" $DEV_CHECK
|
||||
echo "DEV Status :" $DEV_STATUS
|
||||
echo "Motherboard:" $MOTHERBOARD
|
||||
echo "Languages :" $LANGUAGES
|
||||
echo "Hex-file Folder:" $OUTPUT_FOLDER
|
||||
echo "$(tput sgr0)"
|
||||
|
||||
cd $SCRIPT_PATH/lang
|
||||
./lang-build.sh || exit 10
|
||||
./fw-build.sh || exit 11
|
||||
#Prepare Firmware to be compiled by copying variant as Configuration_prusa.h
|
||||
if [ ! -f "$SCRIPT_PATH/Firmware/Configuration_prusa.h" ]; then
|
||||
cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 11
|
||||
else
|
||||
echo "$(tput setaf 6)Configuration_prusa.h already exist it will be overwritten in 10 seconds by the chosen variant.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
cp -f $SCRIPT_PATH/Firmware/variants/$VARIANT.h $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 11
|
||||
fi
|
||||
|
||||
#Prepare Configuration.h to use the correct FW_DEV_VERSION to prevent LCD messages when connecting with OctoPrint
|
||||
sed -i -- "s/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/g" $SCRIPT_PATH/Firmware/Configuration.h
|
||||
|
||||
# set FW_REPOSITORY
|
||||
sed -i -- 's/#define FW_REPOSITORY "Unknown"/#define FW_REPOSITORY "Prusa3d"/g' $SCRIPT_PATH/Firmware/Configuration.h
|
||||
|
||||
#Prepare english only or multilanguage version to be build
|
||||
if [ $LANGUAGES == "ALL" ]; then
|
||||
echo " "
|
||||
echo "Multi-language firmware will be build"
|
||||
echo " "
|
||||
else
|
||||
echo " "
|
||||
echo "English only language firmware will be build"
|
||||
echo " "
|
||||
fi
|
||||
|
||||
#Check if compiler flags are set to Prusa specific needs for the rambo board.
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
RAMBO_PLATFORM_FILE="rambo/hardware/avr/1.0.1/platform.txt"
|
||||
COMP_FLAGS="compiler.c.elf.flags={compiler.warning_flags} -Os -g -flto -fuse-linker-plugin -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections"
|
||||
CHECK_FLAGS=$(grep --max-count=1 "$COMP_FLAGS" $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE)
|
||||
if [ -z "$CHECK_FLAGS" ]; then
|
||||
echo "Compiler flags not found, adding flags"
|
||||
if [ ! -f $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE.bck ]; then
|
||||
echo "making a backup"
|
||||
ls $BUILD_ENV_PATH/portable/packages/rambo/hardware/avr/1.0.1/
|
||||
cp -f $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE.bck
|
||||
fi
|
||||
echo $COMP_FLAGS >> $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE
|
||||
else
|
||||
echo "Compiler flags are set in rambo platform.txt" $CHECK_FLAGS
|
||||
fi
|
||||
fi
|
||||
|
||||
#### End of Prepare building
|
||||
|
||||
#### Start building
|
||||
|
||||
export ARDUINO=$BUILD_ENV_PATH
|
||||
#echo $BUILD_ENV_PATH
|
||||
export BUILDER=$ARDUINO/arduino-builder
|
||||
|
||||
echo
|
||||
#read -t 5 -p "Press any key..."
|
||||
echo
|
||||
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
echo "Start to build Prusa Firmware under Windows..."
|
||||
echo "Using variant $VARIANT$(tput setaf 3)"
|
||||
sleep 2
|
||||
#$BUILDER -dump-prefs -logger=machine -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=rambo:avr:rambo -ide-version=10805 -build-path=$BUILD_PATH -warnings=none -quiet $SCRIPT_PATH/Firmware/Firmware.ino || exit 12
|
||||
#$BUILDER -compile -logger=machine -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=rambo:avr:rambo -ide-version=10805 -build-path=$BUILD_PATH -warnings=none -quiet $SCRIPT_PATH/Firmware/Firmware.ino || exit 13
|
||||
$BUILDER -compile -hardware $ARDUINO/hardware -hardware $ARDUINO/portable/packages -tools $ARDUINO/tools-builder -tools $ARDUINO/hardware/tools/avr -tools $ARDUINO/portable/packages -built-in-libraries $ARDUINO/libraries -libraries $ARDUINO/portable/sketchbook/libraries -fqbn=rambo:avr:rambo -ide-version=10805 -build-path=$BUILD_PATH -warnings=default $SCRIPT_PATH/Firmware/Firmware.ino || exit 14
|
||||
echo "$(tput sgr 0)"
|
||||
fi
|
||||
if [ $OSTYPE == "linux-gnu" ] ; then
|
||||
echo "Start to build Prusa Firmware under Linux 64..."
|
||||
echo "Using variant $VARIANT$(tput setaf 3)"
|
||||
sleep 2
|
||||
$BUILD_ENV_PATH/arduino $SCRIPT_PATH/Firmware/Firmware.ino --verify --board rambo:avr:rambo --pref build.path=$BUILD_PATH || exit 14
|
||||
echo "$(tput sgr 0)"
|
||||
fi
|
||||
|
||||
if [ $LANGUAGES == "ALL" ]; then
|
||||
echo "$(tput setaf 2)"
|
||||
echo "Building mutli language firmware" $MULTI_LANGUAGE_CHECK
|
||||
echo "$(tput sgr 0)"
|
||||
sleep 2
|
||||
cd $SCRIPT_PATH/lang
|
||||
echo "$(tput setaf 3)"
|
||||
./config.sh || exit 15
|
||||
echo "$(tput sgr 0)"
|
||||
# Check if privious languages and firmware build exist and if so clean them up
|
||||
if [ -f "lang_en.tmp" ]; then
|
||||
echo ""
|
||||
echo "$(tput setaf 6)Previous lang build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
echo "$(tput setaf 3)"
|
||||
./lang-clean.sh
|
||||
echo "$(tput sgr 0)"
|
||||
fi
|
||||
if [ -f "progmem.out" ]; then
|
||||
echo ""
|
||||
echo "$(tput setaf 6)Previous firmware build files already exist these will be cleaned up in 10 seconds.$(tput sgr 0)"
|
||||
read -t 10 -p "Press any key to continue..."
|
||||
echo "$(tput setaf 3)"
|
||||
./fw-clean.sh
|
||||
echo "$(tput sgr 0)"
|
||||
fi
|
||||
# build languages
|
||||
echo "$(tput setaf 3)"
|
||||
./lang-build.sh || exit 16
|
||||
# Combine compiled firmware with languages
|
||||
./fw-build.sh || exit 17
|
||||
echo "$(tput sgr 0)"
|
||||
# Check if the motherboard is an EINSY and if so the only one hex file will generated
|
||||
MOTHERBOARD=$(grep --max-count=1 "\bMOTHERBOARD\b" $SCRIPT_PATH/Firmware/variants/$VARIANT.h | sed -e's/ */ /g' |cut -d ' ' -f3)
|
||||
# If the motherboard is an EINSY just copy one hexfile
|
||||
if [ "$MOTHERBOARD" = "BOARD_EINSY_1_0a" ]; then
|
||||
echo "$(tput setaf 2)Copying multi language firmware for MK3/Einsy board to Hex-files folder$(tput sgr 0)"
|
||||
cp -f firmware.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.hex
|
||||
else
|
||||
echo "$(tput setaf 2)Zip multi language firmware for MK2.5/miniRAMbo board to Hex-files folder$(tput sgr 0)"
|
||||
cp -f firmware_cz.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-cz.hex
|
||||
cp -f firmware_de.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-de.hex
|
||||
cp -f firmware_es.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-es.hex
|
||||
cp -f firmware_fr.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-fr.hex
|
||||
cp -f firmware_it.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-it.hex
|
||||
cp -f firmware_pl.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-pl.hex
|
||||
if [ $OSTYPE == "msys" ]; then
|
||||
zip a $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
|
||||
rm $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
|
||||
elif [ $OSTYPE == "linux-gnu" ]; then
|
||||
zip -m -j ../../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT.zip ../../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-??.hex
|
||||
fi
|
||||
fi
|
||||
# Cleanup after build
|
||||
echo "$(tput setaf 3)"
|
||||
./fw-clean.sh || exit 18
|
||||
./lang-clean.sh || exit 19
|
||||
echo "$(tput sgr 0)"
|
||||
else
|
||||
echo "$(tput setaf 2)Copying English only firmware to Hex-files folder$(tput sgr 0)"
|
||||
cp -f $BUILD_PATH/Firmware.ino.hex $SCRIPT_PATH/../$OUTPUT_FOLDER/FW$FW-Build$BUILD-$VARIANT-EN_ONLY.hex || exit 20
|
||||
fi
|
||||
|
||||
# Cleanup Firmware
|
||||
rm $SCRIPT_PATH/Firmware/Configuration_prusa.h || exit 17
|
||||
sed -i -- "s/^#define FW_DEV_VERSION FW_VERSION_$DEV_STATUS/#define FW_DEV_VERSION FW_VERSION_UNKNOWN/g" $SCRIPT_PATH/Firmware/Configuration.h
|
||||
sed -i -- 's/^#define FW_REPOSITORY "Prusa3d"/#define FW_REPOSITORY "Unknown"/g' $SCRIPT_PATH/Firmware/Configuration.h
|
||||
echo $MULTI_LANGUAGE_CHECK
|
||||
#sed -i -- "s/^#define LANG_MODE * /#define LANG_MODE $MULTI_LANGUAGE_CHECK/g" $SCRIPT_PATH/Firmware/config.h
|
||||
sed -i -- "s/^#define LANG_MODE *1/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
|
||||
sed -i -- "s/^#define LANG_MODE *0/#define LANG_MODE ${MULTI_LANGUAGE_CHECK}/g" $SCRIPT_PATH/Firmware/config.h
|
||||
sleep 5
|
||||
done
|
||||
|
||||
# Cleanup compiler flags are set to Prusa specific needs for the rambo board.
|
||||
#if [ $OSTYPE == "msys" ]; then
|
||||
# echo " "
|
||||
# echo "Restore Windows platform.txt"
|
||||
# echo " "
|
||||
# cp -f $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE.bck $BUILD_ENV_PATH/portable/packages/$RAMBO_PLATFORM_FILE
|
||||
#fi
|
||||
|
||||
# Switch to hex path and list build files
|
||||
cd $SCRIPT_PATH
|
||||
cd ..
|
||||
echo "$(tput setaf 2) "
|
||||
echo " "
|
||||
echo "Build done, please use Slic3rPE > 1.41.0 to upload the firmware"
|
||||
echo "more information how to flash firmware https://www.prusa3d.com/drivers/ $(tput sgr 0)"
|
||||
#### End building
|
||||
|
||||
6
prepare_winbuild.ps1
Normal file
6
prepare_winbuild.ps1
Normal file
@ -0,0 +1,6 @@
|
||||
#This powershell script prepares your Windows 10 64-bit computer to be able to compile your
|
||||
#Prusa Firmware by installing a Linux Subsystem
|
||||
#Please run it as administrator
|
||||
|
||||
Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Windows-Subsystem-Linux
|
||||
Invoke-WebRequest -Uri https://aka.ms/wsl-ubuntu -OutFile Ubuntu.appx -UseBasicParsing
|
||||
Loading…
Reference in New Issue
Block a user